pg.ddx.io pgsql-admin@postgresql.org mailing list archive
help / color / mirror / Atom feedMac OS 10.3.4: pgsql fails to launch at boot
5+ messages / 4 participants
[nested] [flat]
* Mac OS 10.3.4: pgsql fails to launch at boot
@ 2004-06-07 14:28 Randall Perry <rgp@systame.com>
2004-06-07 16:57 ` Re: Mac OS 10.3.4: pgsql fails to launch at boot Jeff Self <jself@nngov.com>
0 siblings, 1 reply; 5+ messages in thread
From: Randall Perry @ 2004-06-07 14:28 UTC (permalink / raw)
To: pgsql-admin
On searching the archives I noticed Bob Smith in Jul, 2002 had a similar
problem to mine, but never posted a solution.
I'm using pgsql 7.4.2 on Mac OS 10.3.4. I installed the startup script for
darwin from the contrib/start-scripts folder. On boot, pgsql startup fails
and I see this error in the pgsql logfile:
bootstrap_look_up() failed (ipc/send) invalid destination port
After the machine has booted the same startup script works fine.
This appears to be a Mac OS issue. If anyone has any clue what's going on
please let me know.
I've gotten around the problem right now by putting a call to the startup
script directly in /etc/rc, as the last command.
--
Randall Perry
sysTame
Xserve Web Hosting/Co-location
Website Development/Promotion
Mac Consulting/Sales
http://www.systame.com/
^ permalink raw reply [nested|flat] 5+ messages in thread
* Re: Mac OS 10.3.4: pgsql fails to launch at boot
2004-06-07 14:28 Mac OS 10.3.4: pgsql fails to launch at boot Randall Perry <rgp@systame.com>
@ 2004-06-07 16:57 ` Jeff Self <jself@nngov.com>
2004-06-07 17:49 ` Re: Mac OS 10.3.4: pgsql fails to launch at boot Randall Perry <rgp@systame.com>
0 siblings, 1 reply; 5+ messages in thread
From: Jeff Self @ 2004-06-07 16:57 UTC (permalink / raw)
To: Randall Perry <rgp@systame.com>; +Cc: pgsql-admin
On Mon, 2004-06-07 at 10:28, Randall Perry wrote:
> On searching the archives I noticed Bob Smith in Jul, 2002 had a similar
> problem to mine, but never posted a solution.
>
> I'm using pgsql 7.4.2 on Mac OS 10.3.4. I installed the startup script for
> darwin from the contrib/start-scripts folder. On boot, pgsql startup fails
> and I see this error in the pgsql logfile:
>
> bootstrap_look_up() failed (ipc/send) invalid destination port
>
> After the machine has booted the same startup script works fine.
>
> This appears to be a Mac OS issue. If anyone has any clue what's going on
> please let me know.
>
> I've gotten around the problem right now by putting a call to the startup
> script directly in /etc/rc, as the last command.
I've never run into this myself. Did you install from source or use
Mark Liyanage's package? His package is at
http://www.entropy.ch/software/macosx/postgresql/
Very easy installation if you're willing to start over.
--
Jeff Self
Dept. of Information Technology
City of Newport News
757.926.3741
^ permalink raw reply [nested|flat] 5+ messages in thread
* Re: Mac OS 10.3.4: pgsql fails to launch at boot
2004-06-07 14:28 Mac OS 10.3.4: pgsql fails to launch at boot Randall Perry <rgp@systame.com>
2004-06-07 16:57 ` Re: Mac OS 10.3.4: pgsql fails to launch at boot Jeff Self <jself@nngov.com>
@ 2004-06-07 17:49 ` Randall Perry <rgp@systame.com>
2004-06-07 20:10 ` Re: Mac OS 10.3.4: pgsql fails to launch at boot Jose' Cruanyes <cruanyes@cegroup.it>
0 siblings, 1 reply; 5+ messages in thread
From: Randall Perry @ 2004-06-07 17:49 UTC (permalink / raw)
To: Jeff Self <jself@nngov.com>; +Cc: pgsql-admin
on 6/7/04 12:57 PM, Jeff Self at jself@nngov.com wrote:
> On Mon, 2004-06-07 at 10:28, Randall Perry wrote:
>> On searching the archives I noticed Bob Smith in Jul, 2002 had a similar
>> problem to mine, but never posted a solution.
>>
>> I'm using pgsql 7.4.2 on Mac OS 10.3.4. I installed the startup script for
>> darwin from the contrib/start-scripts folder. On boot, pgsql startup fails
>> and I see this error in the pgsql logfile:
>>
>> bootstrap_look_up() failed (ipc/send) invalid destination port
>>
>> After the machine has booted the same startup script works fine.
>>
>> This appears to be a Mac OS issue. If anyone has any clue what's going on
>> please let me know.
>>
>> I've gotten around the problem right now by putting a call to the startup
>> script directly in /etc/rc, as the last command.
>
> I've never run into this myself. Did you install from source or use
> Mark Liyanage's package? His package is at
> http://www.entropy.ch/software/macosx/postgresql/
>
> Very easy installation if you're willing to start over.
I've been rolling my own PostgreSQL for quite a while. AFICT there's nothing
wrong with the installation; there's just something wrong with SystemStarter
and pgsql.
--
Randall Perry
sysTame
Xserve Web Hosting/Co-location
Website Development/Promotion
Mac Consulting/Sales
http://www.systame.com/
^ permalink raw reply [nested|flat] 5+ messages in thread
* Re: Mac OS 10.3.4: pgsql fails to launch at boot
2004-06-07 14:28 Mac OS 10.3.4: pgsql fails to launch at boot Randall Perry <rgp@systame.com>
2004-06-07 16:57 ` Re: Mac OS 10.3.4: pgsql fails to launch at boot Jeff Self <jself@nngov.com>
2004-06-07 17:49 ` Re: Mac OS 10.3.4: pgsql fails to launch at boot Randall Perry <rgp@systame.com>
@ 2004-06-07 20:10 ` Jose' Cruanyes <cruanyes@cegroup.it>
2004-06-12 23:53 ` Re: Mac OS 10.3.4: pgsql fails to launch at boot Kurt Watson <kurtwatson@adelphia.net>
0 siblings, 1 reply; 5+ messages in thread
From: Jose' Cruanyes @ 2004-06-07 20:10 UTC (permalink / raw)
To: pgsql-admin
probably the scripts kicks in too early because the
"StartupParameters.plist" file is not correct
here's mine
---------------
{
Description = "PostGreSQL RDBMS";
Provides = ("PostGreSQL");
Requires = ("Network", "Resolver");
Uses = ("Network Time", "NFS");
OrderPreference = "Last";
Messages =
{
start = "Starting PostGreSQL Services";
stop = "Stopping PostGreSQL Services";
};
}
---------------
and for completeness here is the SystemStarter script
-----------
#!/bin/sh
startPG ()
{
sudo -u pgsql /usr/local/pgsql/bin/pg_ctl start -D
/usr/local/pgsql/data -l /var/log/postgres/postgres.log -o -i
/bin/sleep 1 # Just for flashing the note
}
stopPG ()
{
/usr/local/pgsql/bin/pg_ctl -D /usr/local/pgsql/data stop
}
if /bin/test "$1" = "start"
then
startPG
elif /bin/test "$1" = "stop"
then
stopPG
fi
-----------
may be is not the best system posible but it works well in several tens
of servers now
On Jun 7, 2004, at 7:49 PM, Randall Perry wrote:
> on 6/7/04 12:57 PM, Jeff Self at jself@nngov.com wrote:
>
>> On Mon, 2004-06-07 at 10:28, Randall Perry wrote:
>>> On searching the archives I noticed Bob Smith in Jul, 2002 had a
>>> similar
>>> problem to mine, but never posted a solution.
>>>
>>> I'm using pgsql 7.4.2 on Mac OS 10.3.4. I installed the startup
>>> script for
>>> darwin from the contrib/start-scripts folder. On boot, pgsql startup
>>> fails
>>> and I see this error in the pgsql logfile:
>>>
>>> bootstrap_look_up() failed (ipc/send) invalid destination port
>>>
>>> After the machine has booted the same startup script works fine.
>>>
>>> This appears to be a Mac OS issue. If anyone has any clue what's
>>> going on
>>> please let me know.
>>>
>>> I've gotten around the problem right now by putting a call to the
>>> startup
>>> script directly in /etc/rc, as the last command.
>>
>> I've never run into this myself. Did you install from source or use
>> Mark Liyanage's package? His package is at
>> http://www.entropy.ch/software/macosx/postgresql/
>>
>> Very easy installation if you're willing to start over.
>
> I've been rolling my own PostgreSQL for quite a while. AFICT there's
> nothing
> wrong with the installation; there's just something wrong with
> SystemStarter
> and pgsql.
>
> --
> Randall Perry
> sysTame
>
> Xserve Web Hosting/Co-location
> Website Development/Promotion
> Mac Consulting/Sales
>
> http://www.systame.com/
>
>
>
> ---------------------------(end of
> broadcast)---------------------------
> TIP 3: if posting/reading through Usenet, please send an appropriate
> subscribe-nomail command to majordomo@postgresql.org so that your
> message can get through to the mailing list cleanly
>
>
Pax et Bonum
# dott. Jose' Cruanyes Aguilar - C.E. Soft srl
# Pzza. Firenze,4 MILANO - XX Settembre 10, CREMONA
# 02,33603122 0372,460602
^ permalink raw reply [nested|flat] 5+ messages in thread
* Re: Mac OS 10.3.4: pgsql fails to launch at boot
2004-06-07 14:28 Mac OS 10.3.4: pgsql fails to launch at boot Randall Perry <rgp@systame.com>
2004-06-07 16:57 ` Re: Mac OS 10.3.4: pgsql fails to launch at boot Jeff Self <jself@nngov.com>
2004-06-07 17:49 ` Re: Mac OS 10.3.4: pgsql fails to launch at boot Randall Perry <rgp@systame.com>
2004-06-07 20:10 ` Re: Mac OS 10.3.4: pgsql fails to launch at boot Jose' Cruanyes <cruanyes@cegroup.it>
@ 2004-06-12 23:53 ` Kurt Watson <kurtwatson@adelphia.net>
0 siblings, 0 replies; 5+ messages in thread
From: Kurt Watson @ 2004-06-12 23:53 UTC (permalink / raw)
To: pgsql-admin
Jose' Cruanyes wrote:
> probably the scripts kicks in too early because the
> "StartupParameters.plist" file is not correct
SNIP
>
>>> On Mon, 2004-06-07 at 10:28, Randall Perry wrote:
>>>
>>>> On searching the archives I noticed Bob Smith in Jul, 2002 had a
>>>> similar
>>>> problem to mine, but never posted a solution.
>>>>
>>>> I'm using pgsql 7.4.2 on Mac OS 10.3.4. I installed the startup
>>>> script for
>>>> darwin from the contrib/start-scripts folder. On boot, pgsql startup
>>>> fails
>>>> and I see this error in the pgsql logfile:
>>>>
>>>> bootstrap_look_up() failed (ipc/send) invalid destination port
>>>>
>>>> After the machine has booted the same startup script works fine.
>>>>
>>>> This appears to be a Mac OS issue. If anyone has any clue what's
>>>> going on
>>>> please let me know.
SNIP
One related tip, maybe everyone already knows this. You can call
SystemStarter -nd to have SystemStarter run through in debug mode. This
is a pretty good way to see what is running when.
I agree with Jose Cruanyes, it's probably just the .plist preference for
launch order. I've seen "late" and "last" both used.
Good luck, please reply if that fixed it.
^ permalink raw reply [nested|flat] 5+ messages in thread
end of thread, other threads:[~2004-06-12 23:53 UTC | newest]
Thread overview: 5+ messages (download: mbox mbox.gz follow: Atom feed)
-- links below jump to the message on this page --
2004-06-07 14:28 Mac OS 10.3.4: pgsql fails to launch at boot Randall Perry <rgp@systame.com>
2004-06-07 16:57 ` Jeff Self <jself@nngov.com>
2004-06-07 17:49 ` Randall Perry <rgp@systame.com>
2004-06-07 20:10 ` Jose' Cruanyes <cruanyes@cegroup.it>
2004-06-12 23:53 ` Kurt Watson <kurtwatson@adelphia.net>
This inbox is served by DDX for PostgreSQL; see mirroring instructions
for how to clone and mirror all data and code used for this inbox