pg.ddx.io  pgsql-admin@postgresql.org mailing list archive  
help / color / mirror / Atom feed
64 or 32 postgres
4+ messages / 3 participants
[nested] [flat]

* 64 or 32 postgres
@ 2005-03-25 19:12 Subbiah, Stalin <SSubbiah@netopia.com>
  2005-03-25 19:32 ` Re: 64 or 32 postgres Matthew Wronkowski <mattw@csh.rit.edu>
  2005-03-25 19:36 ` Re: 64 or 32 postgres Tom Lane <tgl@sss.pgh.pa.us>
  0 siblings, 2 replies; 4+ messages in thread

From: Subbiah, Stalin @ 2005-03-25 19:12 UTC (permalink / raw)
  To: pgsql-admin

How to figure out whether the installed postgres version is 32 bit or
64bit ? We installed postgres801 from src on susu box with EMT64 bit
hardware. I assume since the hardware was 64 bit, postgres should have
compiled in 64 bit too, but then we ran into this error

FATAL: database files are incompatible with server
DETAIL: The database cluster was initialized without
HAVE_INT64_TIMESTAMP but the server was compiled with
HAVE_INT64_TIMESTAMP.
HINT: It looks like you need to recompile or initdb. 

Any ideas ?

Thanks,
Stalin

^ permalink  raw  reply  [nested|flat] 4+ messages in thread

* Re: 64 or 32 postgres
  2005-03-25 19:12 64 or 32 postgres Subbiah, Stalin <SSubbiah@netopia.com>
@ 2005-03-25 19:32 ` Matthew Wronkowski <mattw@csh.rit.edu>
  1 sibling, 0 replies; 4+ messages in thread

From: Matthew Wronkowski @ 2005-03-25 19:32 UTC (permalink / raw)
  To: Subbiah, Stalin <SSubbiah@netopia.com>; +Cc: pgsql-admin

On Fri, Mar 25, 2005 at 11:12AM -0800, I got a letter,
 where Subbiah, Stalin told me:

> How to figure out whether the installed postgres version is 32 bit or
> 64bit ? We installed postgres801 from src on susu box with EMT64 bit
> hardware. I assume since the hardware was 64 bit, postgres should have
> compiled in 64 bit too, but then we ran into this error
> 
> FATAL: database files are incompatible with server
> DETAIL: The database cluster was initialized without
> HAVE_INT64_TIMESTAMP but the server was compiled with
> HAVE_INT64_TIMESTAMP.
> HINT: It looks like you need to recompile or initdb. 
> 
> Any ideas ?
> 
> Thanks,
> Stalin

Stalin,

Probably the easiest way to figure out if the server is 64-bit is to 
run 'file postmaster' binary.  However, the problem you are running into
is because postgresql was configured/compiled with

--enable-integer-datetimes  enable 64-bit integer date/time support

Recompile without this flag.

-- 
Matthew Wronkowski, CCNP
Bioinformatics
Rochester Institute of Technology



^ permalink  raw  reply  [nested|flat] 4+ messages in thread

* Re: 64 or 32 postgres
  2005-03-25 19:12 64 or 32 postgres Subbiah, Stalin <SSubbiah@netopia.com>
@ 2005-03-25 19:36 ` Tom Lane <tgl@sss.pgh.pa.us>
  1 sibling, 0 replies; 4+ messages in thread

From: Tom Lane @ 2005-03-25 19:36 UTC (permalink / raw)
  To: Subbiah, Stalin <SSubbiah@netopia.com>; +Cc: pgsql-admin

"Subbiah, Stalin" <SSubbiah@netopia.com> writes:
> How to figure out whether the installed postgres version is 32 bit or
> 64bit ? We installed postgres801 from src on susu box with EMT64 bit
> hardware. I assume since the hardware was 64 bit, postgres should have
> compiled in 64 bit too, but then we ran into this error

> FATAL: database files are incompatible with server
> DETAIL: The database cluster was initialized without
> HAVE_INT64_TIMESTAMP but the server was compiled with
> HAVE_INT64_TIMESTAMP.
> HINT: It looks like you need to recompile or initdb.=20

That has nothing to do with 64/32 bit; you changed the
--enable-integer-datetimes config option.

			regards, tom lane



^ permalink  raw  reply  [nested|flat] 4+ messages in thread

* Re: 64 or 32 postgres
@ 2005-03-25 20:52 Subbiah, Stalin <SSubbiah@netopia.com>
  0 siblings, 0 replies; 4+ messages in thread

From: Subbiah, Stalin @ 2005-03-25 20:52 UTC (permalink / raw)
  To: Tom Lane <tgl@sss.pgh.pa.us>; +Cc: pgsql-admin

Hmm..

It was complied with ./configure --without-readline. That's it. 

Does postgres801 rpm (postgresql-server-8.0.1-0.1.x86_64.rpm)  comes
with --enable-integer-datetimes enabled by default ? The reason it
prompted me to ask is that, we have postgres801 rpm install in the same
machine in /var/lib dir. If it's enabled by default then I think we
might have started postgres from the rpm binary as opposed to src
binary.

What parameters should I enable if I install postgres on a 64 bit
hardware from src. Seems like x86_64.rpm's enables some parameters which
I'm missing it when I compile it from src.

Thanks,
-Stalin

-----Original Message-----
From: Tom Lane [mailto:tgl@sss.pgh.pa.us] 
Sent: Friday, March 25, 2005 11:37 AM
To: Subbiah, Stalin
Cc: pgsql-admin@postgresql.org
Subject: Re: [ADMIN] 64 or 32 postgres 

"Subbiah, Stalin" <SSubbiah@netopia.com> writes:
> How to figure out whether the installed postgres version is 32 bit or 
> 64bit ? We installed postgres801 from src on susu box with EMT64 bit 
> hardware. I assume since the hardware was 64 bit, postgres should have

> compiled in 64 bit too, but then we ran into this error

> FATAL: database files are incompatible with server
> DETAIL: The database cluster was initialized without 
> HAVE_INT64_TIMESTAMP but the server was compiled with 
> HAVE_INT64_TIMESTAMP.
> HINT: It looks like you need to recompile or initdb.=20

That has nothing to do with 64/32 bit; you changed the
--enable-integer-datetimes config option.

			regards, tom lane



^ permalink  raw  reply  [nested|flat] 4+ messages in thread


end of thread, other threads:[~2005-03-25 20:52 UTC | newest]

Thread overview: 4+ messages (download: mbox mbox.gz follow: Atom feed)
-- links below jump to the message on this page --
2005-03-25 19:12 64 or 32 postgres Subbiah, Stalin <SSubbiah@netopia.com>
2005-03-25 19:32 ` Matthew Wronkowski <mattw@csh.rit.edu>
2005-03-25 19:36 ` Tom Lane <tgl@sss.pgh.pa.us>
2005-03-25 20:52 Re: 64 or 32 postgres Subbiah, Stalin <SSubbiah@netopia.com>

This inbox is served by DDX for PostgreSQL; see mirroring instructions
for how to clone and mirror all data and code used for this inbox