pg.ddx.io  pgsql-admin@postgresql.org mailing list archive  
help / color / mirror / Atom feed
Windows pgpass Problems..
9+ messages / 5 participants
[nested] [flat]

* Windows pgpass Problems..
@ 2005-09-06 15:24 Eric Emerton <Eric.Emerton@etrials.com>
  2005-09-06 17:13 ` Re: Windows pgpass Problems.. Lane Van Ingen <lvaningen@esncc.com>
  2005-09-06 18:48 ` Re: Windows pgpass Problems.. Alvaro Herrera <alvherre@alvh.no-ip.org>
  2005-09-06 20:57 ` Re: Windows pgpass Problems.. Scott Marlowe <smarlowe@g2switchworks.com>
  0 siblings, 3 replies; 9+ messages in thread

From: Eric Emerton @ 2005-09-06 15:24 UTC (permalink / raw)
  To: pgsql-admin

I have been stuggling all day with the pgpass ability on 8.0 Postgres - on Windows 2000.   I have been to the documentation:<http://www.postgresql.org/docs/8.0/interactive/libpq-pgpass.html; After reading many threads on similar problems, I just cannot seem to get a batch file to recognize that pgpass is there.   I have dropped it into the Application data directory postgresql\pgpass.conf of 'Administrator', (My windows username), 'postgres', 'All Users', etc, etc.    The contents I have tried for the pgpass file areeach of the combinations of:

localhost:5432:<mydbname>:<dbusername>:<the password>
127.0.0.1:5432:<mydbname>:<dbusername>:<the password>
localhost:*:<mydbname>:<dbusername>:<the password>
127.0.0.1:*:<mydbname>:<dbusername>:<the password>
..and many others

<dbusername> has been postgres and other test superuser accounts.   Nothing seems to work.  I have restarted postgres, restarted windows, and it simply wont take..

Regards,
Eric Emerton




^ permalink  raw  reply  [nested|flat] 9+ messages in thread

* Re: Windows pgpass Problems..
  2005-09-06 15:24 Windows pgpass Problems.. Eric Emerton <Eric.Emerton@etrials.com>
@ 2005-09-06 17:13 ` Lane Van Ingen <lvaningen@esncc.com>
  2 siblings, 0 replies; 9+ messages in thread

From: Lane Van Ingen @ 2005-09-06 17:13 UTC (permalink / raw)
  To: Eric Emerton <Eric.Emerton@etrials.com>; pgsql-admin

Eric, I will be interested to see someone's response to your message,
because I am having the same problem (in Windows 2003, version 8.0). I want
to use it in a batch file that invokes psql to load a database, etc. without
prompting for a password. I have not tried to use wildcards (defeats the
purpose of what I am doing), but have used the specific values for
hostname:port:database:user:password, with no luck.

I (initially) did not know where %appdata%\postgresql should be; be sure
your pgpass.conf file is in the right place. You can find it by using this
command at the DOS command prompt:
   echo %appdata%

-----Original Message-----
From: pgsql-admin-owner@postgresql.org
[mailto:pgsql-admin-owner@postgresql.org]On Behalf Of Eric Emerton
Sent: Tuesday, September 06, 2005 11:25 AM
To: pgsql-admin@postgresql.org
Subject: [ADMIN] Windows pgpass Problems..


I have been stuggling all day with the pgpass ability on 8.0 Postgres - on
Windows 2000.   I have been to the
documentation:<http://www.postgresql.org/docs/8.0/interactive/libpq-pgpass.h
tml> After reading many threads on similar problems, I just cannot seem to
get a batch file to recognize that pgpass is there.   I have dropped it into
the Application data directory postgresql\pgpass.conf of 'Administrator',
(My windows username), 'postgres', 'All Users', etc, etc.    The contents I
have tried for the pgpass file areeach of the combinations of:

localhost:5432:<mydbname>:<dbusername>:<the password>
127.0.0.1:5432:<mydbname>:<dbusername>:<the password>
localhost:*:<mydbname>:<dbusername>:<the password>
127.0.0.1:*:<mydbname>:<dbusername>:<the password>
..and many others

<dbusername> has been postgres and other test superuser accounts.   Nothing
seems to work.  I have restarted postgres, restarted windows, and it simply
wont take..

Regards,
Eric Emerton


---------------------------(end of broadcast)---------------------------
TIP 4: Have you searched our list archives?

               http://archives.postgresql.org





^ permalink  raw  reply  [nested|flat] 9+ messages in thread

* Re: Windows pgpass Problems..
  2005-09-06 15:24 Windows pgpass Problems.. Eric Emerton <Eric.Emerton@etrials.com>
@ 2005-09-06 18:48 ` Alvaro Herrera <alvherre@alvh.no-ip.org>
  2 siblings, 0 replies; 9+ messages in thread

From: Alvaro Herrera @ 2005-09-06 18:48 UTC (permalink / raw)
  To: Eric Emerton <Eric.Emerton@etrials.com>; +Cc: pgsql-admin

On Tue, Sep 06, 2005 at 11:24:45AM -0400, Eric Emerton wrote:
> I have been stuggling all day with the pgpass ability on 8.0 Postgres
> - on Windows 2000.   I have been to the
> documentation:<http://www.postgresql.org/docs/8.0/interactive/libpq-pgpass.html;
> After reading many threads on similar problems, I just cannot seem to
> get a batch file to recognize that pgpass is there.   I have dropped
> it into the Application data directory postgresql\pgpass.conf of
> 'Administrator', (My windows username), 'postgres', 'All Users', etc,
> etc.    The contents I have tried for the pgpass file areeach of the
> combinations of:
> 
> localhost:5432:<mydbname>:<dbusername>:<the password>
> 127.0.0.1:5432:<mydbname>:<dbusername>:<the password>
> localhost:*:<mydbname>:<dbusername>:<the password>
> 127.0.0.1:*:<mydbname>:<dbusername>:<the password>
> ..and many others
> 
> <dbusername> has been postgres and other test superuser accounts.
> Nothing seems to work.  I have restarted postgres, restarted windows,
> and it simply wont take..

Which program fails, and how does it fail?

You have the correct permissions on the file, I presume?  The file
should not be readable nor writable by anyone but the owner; and I
assume the directory where it resides, shouldn't either (In fact I'd
check every directory up in the path.)

-- 
Alvaro Herrera -- Valdivia, Chile         Architect, www.EnterpriseDB.com
"Entristecido, Wutra                     (canción de Las Barreras)
echa a Freyr a rodar
y a nosotros al mar"



^ permalink  raw  reply  [nested|flat] 9+ messages in thread

* Re: Windows pgpass Problems..
  2005-09-06 15:24 Windows pgpass Problems.. Eric Emerton <Eric.Emerton@etrials.com>
@ 2005-09-06 20:57 ` Scott Marlowe <smarlowe@g2switchworks.com>
  2 siblings, 0 replies; 9+ messages in thread

From: Scott Marlowe @ 2005-09-06 20:57 UTC (permalink / raw)
  To: Eric Emerton <Eric.Emerton@etrials.com>; +Cc: pgsql-admin

On Tue, 2005-09-06 at 10:24, Eric Emerton wrote:
> I have been stuggling all day with the pgpass ability on 8.0 Postgres - on Windows 2000.   I have been to the documentation:<http://www.postgresql.org/docs/8.0/interactive/libpq-pgpass.html; After reading many threads on similar problems, I just cannot seem to get a batch file to recognize that pgpass is there.   I have dropped it into the Application data directory postgresql\pgpass.conf of 'Administrator', (My windows username), 'postgres', 'All Users', etc, etc.    The contents I have tried for the pgpass file areeach of the combinations of:
> 
> localhost:5432:<mydbname>:<dbusername>:<the password>
> 127.0.0.1:5432:<mydbname>:<dbusername>:<the password>
> localhost:*:<mydbname>:<dbusername>:<the password>
> 127.0.0.1:*:<mydbname>:<dbusername>:<the password>
> ..and many others
> 
> <dbusername> has been postgres and other test superuser accounts.   Nothing seems to work.  I have restarted postgres, restarted windows, and it simply wont take..

Has it been set to be readable only by the given user who is using it?



^ permalink  raw  reply  [nested|flat] 9+ messages in thread

* Re: Windows pgpass Problems..
@ 2005-09-06 15:28 Eric Emerton <Eric.Emerton@etrials.com>
  0 siblings, 0 replies; 9+ messages in thread

From: Eric Emerton @ 2005-09-06 15:28 UTC (permalink / raw)
  To: pgsql-admin



> I have been stuggling all day with the pgpass ability on 8.0 Postgres - on Windows 2000.   I have been to the documentation:<http://www.postgresql.org/docs/8.0/interactive/libpq-pgpass.html; After reading many threads on similar problems, I just cannot seem to get a batch file to recognize that pgpass is there.   I have dropped it into the Application data directory postgresql\pgpass.conf of 'Administrator', (My windows username), 'postgres', 'All Users', etc, etc.    The contents I have tried for the pgpass file areeach of the combinations of:
> 
> localhost:5432:<mydbname>:<dbusername>:<the password>
> 127.0.0.1:5432:<mydbname>:<dbusername>:<the password>
> localhost:*:<mydbname>:<dbusername>:<the password>
> 127.0.0.1:*:<mydbname>:<dbusername>:<the password>
> ..and many others
> 
> <dbusername> has been postgres and other test superuser accounts.   Nothing seems to work.  I have restarted postgres, restarted windows, and it simply wont take..
> 
> Regards,
> Eric Emerton
> 



^ permalink  raw  reply  [nested|flat] 9+ messages in thread

* Re: Windows pgpass Problems..
@ 2005-09-06 17:17 Eric Emerton <Eric.Emerton@etrials.com>
  0 siblings, 0 replies; 9+ messages in thread

From: Eric Emerton @ 2005-09-06 17:17 UTC (permalink / raw)
  To: Lane Van Ingen <lvaningen@esncc.com>; pgsql-admin

Right,  I found where %APPDATA% was through all the other posts (including yours I believe) - but nevertheless dropping the pgpass.conf into ALL of the %APPDATA% areas - 'All Users', 'postgres' (windows user, just in case), 'emertone' (my machine id), 'Administrator' - none of them seem to take the fact that pgpass.conf is sitting there.    

Eric

-----Original Message-----
From: Lane Van Ingen [mailto:lvaningen@esncc.com]
Sent: Tuesday, September 06, 2005 1:13 PM
To: Eric Emerton; pgsql-admin@postgresql.org
Subject: RE: [ADMIN] Windows pgpass Problems..


Eric, I will be interested to see someone's response to your message,
because I am having the same problem (in Windows 2003, version 8.0). I want
to use it in a batch file that invokes psql to load a database, etc. without
prompting for a password. I have not tried to use wildcards (defeats the
purpose of what I am doing), but have used the specific values for
hostname:port:database:user:password, with no luck.

I (initially) did not know where %appdata%\postgresql should be; be sure
your pgpass.conf file is in the right place. You can find it by using this
command at the DOS command prompt:
   echo %appdata%

-----Original Message-----
From: pgsql-admin-owner@postgresql.org
[mailto:pgsql-admin-owner@postgresql.org]On Behalf Of Eric Emerton
Sent: Tuesday, September 06, 2005 11:25 AM
To: pgsql-admin@postgresql.org
Subject: [ADMIN] Windows pgpass Problems..


I have been stuggling all day with the pgpass ability on 8.0 Postgres - on
Windows 2000.   I have been to the
documentation:<http://www.postgresql.org/docs/8.0/interactive/libpq-pgpass.h
tml> After reading many threads on similar problems, I just cannot seem to
get a batch file to recognize that pgpass is there.   I have dropped it into
the Application data directory postgresql\pgpass.conf of 'Administrator',
(My windows username), 'postgres', 'All Users', etc, etc.    The contents I
have tried for the pgpass file areeach of the combinations of:

localhost:5432:<mydbname>:<dbusername>:<the password>
127.0.0.1:5432:<mydbname>:<dbusername>:<the password>
localhost:*:<mydbname>:<dbusername>:<the password>
127.0.0.1:*:<mydbname>:<dbusername>:<the password>
..and many others

<dbusername> has been postgres and other test superuser accounts.   Nothing
seems to work.  I have restarted postgres, restarted windows, and it simply
wont take..

Regards,
Eric Emerton


---------------------------(end of broadcast)---------------------------
TIP 4: Have you searched our list archives?

               http://archives.postgresql.org





^ permalink  raw  reply  [nested|flat] 9+ messages in thread

* Re: Windows pgpass Problems..
@ 2005-09-06 17:33 Eric Emerton <Eric.Emerton@etrials.com>
  2005-09-06 17:55 ` Re: Windows pgpass Problems.. Lane Van Ingen <lvaningen@esncc.com>
  0 siblings, 1 reply; 9+ messages in thread

From: Eric Emerton @ 2005-09-06 17:33 UTC (permalink / raw)
  To: Lane Van Ingen <lvaningen@esncc.com>; pgsql-admin

Lane

I may have found the problem (or at least a way around it) - through another thread search.

The file:
C:\Program Files\PostgreSQL\<your version>\data\pg_hba.conf

..has general connection info for hitting postgres.  Mine looked like:

# TYPE  DATABASE    USER        CIDR-ADDRESS          METHOD
local   all         all                               md5
# IPv4-style local connections:
host    all         all         127.0.0.1/32          md5
:
etc.

I changed the 'md5's to 'trust' for local connections, and the prompting for Password during a .bat batch run of a backup stopped working.   I'm a bit of a Postgres rookie, so I'm not sure the ramifications of changing this to 'trust' on a more global security level.

Eric



-----Original Message-----
From: Lane Van Ingen [mailto:lvaningen@esncc.com]
Sent: Tuesday, September 06, 2005 1:13 PM
To: Eric Emerton; pgsql-admin@postgresql.org
Subject: RE: [ADMIN] Windows pgpass Problems..


Eric, I will be interested to see someone's response to your message,
because I am having the same problem (in Windows 2003, version 8.0). I want
to use it in a batch file that invokes psql to load a database, etc. without
prompting for a password. I have not tried to use wildcards (defeats the
purpose of what I am doing), but have used the specific values for
hostname:port:database:user:password, with no luck.

I (initially) did not know where %appdata%\postgresql should be; be sure
your pgpass.conf file is in the right place. You can find it by using this
command at the DOS command prompt:
   echo %appdata%

-----Original Message-----
From: pgsql-admin-owner@postgresql.org
[mailto:pgsql-admin-owner@postgresql.org]On Behalf Of Eric Emerton
Sent: Tuesday, September 06, 2005 11:25 AM
To: pgsql-admin@postgresql.org
Subject: [ADMIN] Windows pgpass Problems..


I have been stuggling all day with the pgpass ability on 8.0 Postgres - on
Windows 2000.   I have been to the
documentation:<http://www.postgresql.org/docs/8.0/interactive/libpq-pgpass.h
tml> After reading many threads on similar problems, I just cannot seem to
get a batch file to recognize that pgpass is there.   I have dropped it into
the Application data directory postgresql\pgpass.conf of 'Administrator',
(My windows username), 'postgres', 'All Users', etc, etc.    The contents I
have tried for the pgpass file areeach of the combinations of:

localhost:5432:<mydbname>:<dbusername>:<the password>
127.0.0.1:5432:<mydbname>:<dbusername>:<the password>
localhost:*:<mydbname>:<dbusername>:<the password>
127.0.0.1:*:<mydbname>:<dbusername>:<the password>
..and many others

<dbusername> has been postgres and other test superuser accounts.   Nothing
seems to work.  I have restarted postgres, restarted windows, and it simply
wont take..

Regards,
Eric Emerton


---------------------------(end of broadcast)---------------------------
TIP 4: Have you searched our list archives?

               http://archives.postgresql.org





^ permalink  raw  reply  [nested|flat] 9+ messages in thread

* Re: Windows pgpass Problems..
  2005-09-06 17:33 Re: Windows pgpass Problems.. Eric Emerton <Eric.Emerton@etrials.com>
@ 2005-09-06 17:55 ` Lane Van Ingen <lvaningen@esncc.com>
  0 siblings, 0 replies; 9+ messages in thread

From: Lane Van Ingen @ 2005-09-06 17:55 UTC (permalink / raw)
  To: Eric Emerton <Eric.Emerton@etrials.com>; pgsql-admin

I am relatively new to PostgreSQL too, so we are sharing the same boat :-)

Will try it, it will get me by a big problem temporarily, but hopefully
somebody will answer why the 'recommended way' does not (appear) to work. As
it turns out, this would work for me, so long as I copy in another
pg_hba.conf file later in the batch file that closes up the security hole I
may be opening by saying 'trust'.

-----Original Message-----
From: Eric Emerton [mailto:Eric.Emerton@etrials.com]
Sent: Tuesday, September 06, 2005 1:34 PM
To: Lane Van Ingen; pgsql-admin@postgresql.org
Subject: RE: [ADMIN] Windows pgpass Problems..


Lane

I may have found the problem (or at least a way around it) - through another
thread search.

The file:
C:\Program Files\PostgreSQL\<your version>\data\pg_hba.conf

..has general connection info for hitting postgres.  Mine looked like:

# TYPE  DATABASE    USER        CIDR-ADDRESS          METHOD
local   all         all                               md5
# IPv4-style local connections:
host    all         all         127.0.0.1/32          md5
:
etc.

I changed the 'md5's to 'trust' for local connections, and the prompting for
Password during a .bat batch run of a backup stopped working.   I'm a bit of
a Postgres rookie, so I'm not sure the ramifications of changing this to
'trust' on a more global security level.

Eric



-----Original Message-----
From: Lane Van Ingen [mailto:lvaningen@esncc.com]
Sent: Tuesday, September 06, 2005 1:13 PM
To: Eric Emerton; pgsql-admin@postgresql.org
Subject: RE: [ADMIN] Windows pgpass Problems..


Eric, I will be interested to see someone's response to your message,
because I am having the same problem (in Windows 2003, version 8.0). I want
to use it in a batch file that invokes psql to load a database, etc. without
prompting for a password. I have not tried to use wildcards (defeats the
purpose of what I am doing), but have used the specific values for
hostname:port:database:user:password, with no luck.

I (initially) did not know where %appdata%\postgresql should be; be sure
your pgpass.conf file is in the right place. You can find it by using this
command at the DOS command prompt:
   echo %appdata%

-----Original Message-----
From: pgsql-admin-owner@postgresql.org
[mailto:pgsql-admin-owner@postgresql.org]On Behalf Of Eric Emerton
Sent: Tuesday, September 06, 2005 11:25 AM
To: pgsql-admin@postgresql.org
Subject: [ADMIN] Windows pgpass Problems..


I have been stuggling all day with the pgpass ability on 8.0 Postgres - on
Windows 2000.   I have been to the
documentation:<http://www.postgresql.org/docs/8.0/interactive/libpq-pgpass.h
tml> After reading many threads on similar problems, I just cannot seem to
get a batch file to recognize that pgpass is there.   I have dropped it into
the Application data directory postgresql\pgpass.conf of 'Administrator',
(My windows username), 'postgres', 'All Users', etc, etc.    The contents I
have tried for the pgpass file areeach of the combinations of:

localhost:5432:<mydbname>:<dbusername>:<the password>
127.0.0.1:5432:<mydbname>:<dbusername>:<the password>
localhost:*:<mydbname>:<dbusername>:<the password>
127.0.0.1:*:<mydbname>:<dbusername>:<the password>
..and many others

<dbusername> has been postgres and other test superuser accounts.   Nothing
seems to work.  I have restarted postgres, restarted windows, and it simply
wont take..

Regards,
Eric Emerton


---------------------------(end of broadcast)---------------------------
TIP 4: Have you searched our list archives?

               http://archives.postgresql.org






^ permalink  raw  reply  [nested|flat] 9+ messages in thread

* Re: Windows pgpass Problems..
@ 2005-09-06 18:18 Goulet, Dick <DGoulet@vicr.com>
  0 siblings, 0 replies; 9+ messages in thread

From: Goulet, Dick @ 2005-09-06 18:18 UTC (permalink / raw)
  To: Lane Van Ingen <lvaningen@esncc.com>; Eric Emerton <Eric.Emerton@etrials.com>; pgsql-admin

I believe the problem is that under Windows there is no such entity as
$HOME. 

-----Original Message-----
From: pgsql-admin-owner@postgresql.org
[mailto:pgsql-admin-owner@postgresql.org] On Behalf Of Lane Van Ingen
Sent: Tuesday, September 06, 2005 1:55 PM
To: Eric Emerton; pgsql-admin@postgresql.org
Subject: Re: [ADMIN] Windows pgpass Problems..

I am relatively new to PostgreSQL too, so we are sharing the same boat
:-)

Will try it, it will get me by a big problem temporarily, but hopefully
somebody will answer why the 'recommended way' does not (appear) to
work. As
it turns out, this would work for me, so long as I copy in another
pg_hba.conf file later in the batch file that closes up the security
hole I
may be opening by saying 'trust'.

-----Original Message-----
From: Eric Emerton [mailto:Eric.Emerton@etrials.com]
Sent: Tuesday, September 06, 2005 1:34 PM
To: Lane Van Ingen; pgsql-admin@postgresql.org
Subject: RE: [ADMIN] Windows pgpass Problems..


Lane

I may have found the problem (or at least a way around it) - through
another
thread search.

The file:
C:\Program Files\PostgreSQL\<your version>\data\pg_hba.conf

..has general connection info for hitting postgres.  Mine looked like:

# TYPE  DATABASE    USER        CIDR-ADDRESS          METHOD
local   all         all                               md5
# IPv4-style local connections:
host    all         all         127.0.0.1/32          md5
:
etc.

I changed the 'md5's to 'trust' for local connections, and the prompting
for
Password during a .bat batch run of a backup stopped working.   I'm a
bit of
a Postgres rookie, so I'm not sure the ramifications of changing this to
'trust' on a more global security level.

Eric



-----Original Message-----
From: Lane Van Ingen [mailto:lvaningen@esncc.com]
Sent: Tuesday, September 06, 2005 1:13 PM
To: Eric Emerton; pgsql-admin@postgresql.org
Subject: RE: [ADMIN] Windows pgpass Problems..


Eric, I will be interested to see someone's response to your message,
because I am having the same problem (in Windows 2003, version 8.0). I
want
to use it in a batch file that invokes psql to load a database, etc.
without
prompting for a password. I have not tried to use wildcards (defeats the
purpose of what I am doing), but have used the specific values for
hostname:port:database:user:password, with no luck.

I (initially) did not know where %appdata%\postgresql should be; be sure
your pgpass.conf file is in the right place. You can find it by using
this
command at the DOS command prompt:
   echo %appdata%

-----Original Message-----
From: pgsql-admin-owner@postgresql.org
[mailto:pgsql-admin-owner@postgresql.org]On Behalf Of Eric Emerton
Sent: Tuesday, September 06, 2005 11:25 AM
To: pgsql-admin@postgresql.org
Subject: [ADMIN] Windows pgpass Problems..


I have been stuggling all day with the pgpass ability on 8.0 Postgres -
on
Windows 2000.   I have been to the
documentation:<http://www.postgresql.org/docs/8.0/interactive/libpq-pgpa
ss.h
tml> After reading many threads on similar problems, I just cannot seem
to
get a batch file to recognize that pgpass is there.   I have dropped it
into
the Application data directory postgresql\pgpass.conf of
'Administrator',
(My windows username), 'postgres', 'All Users', etc, etc.    The
contents I
have tried for the pgpass file areeach of the combinations of:

localhost:5432:<mydbname>:<dbusername>:<the password>
127.0.0.1:5432:<mydbname>:<dbusername>:<the password>
localhost:*:<mydbname>:<dbusername>:<the password>
127.0.0.1:*:<mydbname>:<dbusername>:<the password>
..and many others

<dbusername> has been postgres and other test superuser accounts.
Nothing
seems to work.  I have restarted postgres, restarted windows, and it
simply
wont take..

Regards,
Eric Emerton


---------------------------(end of broadcast)---------------------------
TIP 4: Have you searched our list archives?

               http://archives.postgresql.org




---------------------------(end of broadcast)---------------------------
TIP 3: Have you checked our extensive FAQ?

               http://www.postgresql.org/docs/faq



^ permalink  raw  reply  [nested|flat] 9+ messages in thread


end of thread, other threads:[~2005-09-06 20:57 UTC | newest]

Thread overview: 9+ messages (download: mbox mbox.gz follow: Atom feed)
-- links below jump to the message on this page --
2005-09-06 15:24 Windows pgpass Problems.. Eric Emerton <Eric.Emerton@etrials.com>
2005-09-06 17:13 ` Lane Van Ingen <lvaningen@esncc.com>
2005-09-06 18:48 ` Alvaro Herrera <alvherre@alvh.no-ip.org>
2005-09-06 20:57 ` Scott Marlowe <smarlowe@g2switchworks.com>
2005-09-06 15:28 Re: Windows pgpass Problems.. Eric Emerton <Eric.Emerton@etrials.com>
2005-09-06 17:17 Re: Windows pgpass Problems.. Eric Emerton <Eric.Emerton@etrials.com>
2005-09-06 17:33 Re: Windows pgpass Problems.. Eric Emerton <Eric.Emerton@etrials.com>
2005-09-06 17:55 ` Lane Van Ingen <lvaningen@esncc.com>
2005-09-06 18:18 Re: Windows pgpass Problems.. Goulet, Dick <DGoulet@vicr.com>

This inbox is served by DDX for PostgreSQL; see mirroring instructions
for how to clone and mirror all data and code used for this inbox