pg.ddx.io pgsql-admin@postgresql.org mailing list archive
help / color / mirror / Atom feedDisabling triggers with psql (gforge 7.4 to 8.2 migration)
11+ messages / 3 participants
[nested] [flat]
* Disabling triggers with psql (gforge 7.4 to 8.2 migration)
@ 2010-02-10 09:30 Iñigo Martinez Lasala <imartinez@vectorsf.com>
0 siblings, 3 replies; 11+ messages in thread
From: Iñigo Martinez Lasala @ 2010-02-10 09:30 UTC (permalink / raw)
To: pgsql-admin
Hi everybody.
We are migrating an ancient gforge postgres 7.4 database to a less
ancient postgres 8.2 one. We have not upgraded to 8.3 or 8.4 due to
problems with implicit conversion for data types (we should had to
review all sql code and we don't have time enough to do it). It's a
quite large database, with a 45GB dump.
We are facing some problems with this.
First one is tsearch. It has changed from postgres 7.4 to 8.2, but I
think we have solved. We have dumped schema of 7.4, removed all tsearch2
related and launch new tsearch2 from contrib folder in 8.2. We did it
with a previous migration from 7.4 to 8.1 (two years ago) and everything
worked, so we think this has been solved.
Second one is database has lot of stuff and bad ascii codes inside. We
can dump, but we cannot restore due to malformed UTF-8 characters. We
also solved this problem by facing a long conversion process with iconv
(from utf-8 to utf-8) removing bad chars. It appears postgres 7.4 didn't
checked utf-8 chars but 8.1 and 8.2 do it. We have performed a data dump
in plain text to use iconv for fixing this.
Third one, and we haven't been able to fix it, is we cannot restore data
dump via psql due to psql does not have an option to disable triggers.
So, when restoring data, it fails. So... is there any way to disable in
a psql session all triggers same way like with pg_restore
--disable-triggers? Or can we convert plain text dump to be processed
by pg_restore? Perhaps a table by table trigger disabling script?
Thanks in advance.
Of course, if there is an easier way to proceed with a 7.4 to 8.2 gforge
database migration, It would be fantastic if anybody can explain me how
to do it. :-)
^ permalink raw reply [nested|flat] 11+ messages in thread
* Re: Disabling triggers with psql (gforge 7.4 to 8.2 migration)
@ 2010-02-10 11:34 Iñigo Martinez Lasala <imartinez@vectorsf.com>
parent: Iñigo Martinez Lasala <imartinez@vectorsf.com>
2 siblings, 0 replies; 11+ messages in thread
From: Iñigo Martinez Lasala @ 2010-02-10 11:34 UTC (permalink / raw)
To: pgsql-admin
Could be a valid strategy to dump in tar format, untar files, fix via
iconv each .dat file and tar them together again?
... and use pg_restore with --disable-triggers in order to avoid
constraints, of course.
-----Original Message-----
From: Iñigo Martinez Lasala <imartinez@vectorsf.com>
To: pgsql-admin <pgsql-admin@postgresql.org>
Subject: [ADMIN] Disabling triggers with psql (gforge 7.4 to 8.2
migration)
Date: Wed, 10 Feb 2010 10:30:18 +0100
Hi everybody.
We are migrating an ancient gforge postgres 7.4 database to a less
ancient postgres 8.2 one. We have not upgraded to 8.3 or 8.4 due to
problems with implicit conversion for data types (we should had to
review all sql code and we don't have time enough to do it). It's a
quite large database, with a 45GB dump.
We are facing some problems with this.
First one is tsearch. It has changed from postgres 7.4 to 8.2, but I
think we have solved. We have dumped schema of 7.4, removed all tsearch2
related and launch new tsearch2 from contrib folder in 8.2. We did it
with a previous migration from 7.4 to 8.1 (two years ago) and everything
worked, so we think this has been solved.
Second one is database has lot of stuff and bad ascii codes inside. We
can dump, but we cannot restore due to malformed UTF-8 characters. We
also solved this problem by facing a long conversion process with iconv
(from utf-8 to utf-8) removing bad chars. It appears postgres 7.4 didn't
checked utf-8 chars but 8.1 and 8.2 do it. We have performed a data dump
in plain text to use iconv for fixing this.
Third one, and we haven't been able to fix it, is we cannot restore data
dump via psql due to psql does not have an option to disable triggers.
So, when restoring data, it fails. So... is there any way to disable in
a psql session all triggers same way like with pg_restore
--disable-triggers? Or can we convert plain text dump to be processed
by pg_restore? Perhaps a table by table trigger disabling script?
Thanks in advance.
Of course, if there is an easier way to proceed with a 7.4 to 8.2 gforge
database migration, It would be fantastic if anybody can explain me how
to do it. :-)
^ permalink raw reply [nested|flat] 11+ messages in thread
* Re: Disabling triggers with psql (gforge 7.4 to 8.2 migration)
@ 2010-02-10 14:55 Josh Kupershmidt <schmiddy@gmail.com>
parent: Iñigo Martinez Lasala <imartinez@vectorsf.com>
2 siblings, 2 replies; 11+ messages in thread
From: Josh Kupershmidt @ 2010-02-10 14:55 UTC (permalink / raw)
To: Iñigo Martinez Lasala <imartinez@vectorsf.com>; +Cc: pgsql-admin
On Feb 10, 2010, at 4:30 AM, Iñigo Martinez Lasala wrote:
>
> Third one, and we haven't been able to fix it, is we cannot restore data dump via psql due to psql does not have an option to disable triggers. So, when restoring data, it fails. So... is there any way to disable in a psql session all triggers same way like with pg_restore --disable-triggers? Or can we convert plain text dump to be processed by pg_restore? Perhaps a table by table trigger disabling script?
How about:
1. restore your schema, with triggers, using a pg_dump --schema-only ... ; pg_restore ...
2. Create a psql-loadable data-only dump using pg_dump --data-only --disable-triggers --format=p ...
3. clean the data-only dump and restore
Or, you could do a full pg_dump -Fc ... of your database, then use pg_restore to restore the compressed dumpfile into a plaintext file (i.e. pg_restore [options] filename). Then run your cleanup on the plaintext file, and reload.
Josh=
^ permalink raw reply [nested|flat] 11+ messages in thread
* Re: Disabling triggers with psql (gforge 7.4 to 8.2 migration)
@ 2010-02-10 15:09 Iñigo Martinez Lasala <imartinez@vectorsf.com>
parent: Josh Kupershmidt <schmiddy@gmail.com>
1 sibling, 1 reply; 11+ messages in thread
From: Iñigo Martinez Lasala @ 2010-02-10 15:09 UTC (permalink / raw)
To: pgsql-admin
Two questions.
I could, of course, create a data-only dump (in fact I've already done
it). However, when restoring, I cannot use pg_restore since it's in
plain format, don't you? pg_restore only works with tar or compressed
formats, I think. I could restore data-only dump with psql, but then
I've to disable triggers and psql does not have an option in order to
disable them.
Second one. You say I could restore a compressed dumpfile into a
plaintext file. Is this possible? How? And after cleaning this plaintext
file, how do I restore it again into database without using psql since
pg_restore only accept tar or compressed file formats?
Thank you, Josh.
-----Original Message-----
From: Josh Kupershmidt <schmiddy@gmail.com>
To: Iñigo Martinez Lasala <imartinez@vectorsf.com>
Cc: pgsql-admin <pgsql-admin@postgresql.org>
Subject: Re: [ADMIN] Disabling triggers with psql (gforge 7.4 to 8.2
migration)
Date: Wed, 10 Feb 2010 09:55:15 -0500
On Feb 10, 2010, at 4:30 AM, Iñigo Martinez Lasala wrote:
>
> Third one, and we haven't been able to fix it, is we cannot restore
> data dump via psql due to psql does not have an option to disable
> triggers. So, when restoring data, it fails. So... is there any way to
> disable in a psql session all triggers same way like with pg_restore
> --disable-triggers? Or can we convert plain text dump to be processed
> by pg_restore? Perhaps a table by table trigger disabling script?
>
How about:
1. restore your schema, with triggers, using a pg_dump
--schema-only ... ; pg_restore ...
2. Create a psql-loadable data-only dump using pg_dump --data-only
--disable-triggers --format=p ...
3. clean the data-only dump and restore
Or, you could do a full pg_dump -Fc ... of your database, then use
pg_restore to restore the compressed dumpfile into a plaintext file
(i.e. pg_restore [options] filename). Then run your cleanup on the
plaintext file, and reload.
Josh
^ permalink raw reply [nested|flat] 11+ messages in thread
* Re: Disabling triggers with psql (gforge 7.4 to 8.2 migration)
@ 2010-02-10 15:30 Iñigo Martinez Lasala <imartinez@vectorsf.com>
parent: Josh Kupershmidt <schmiddy@gmail.com>
1 sibling, 1 reply; 11+ messages in thread
From: Iñigo Martinez Lasala @ 2010-02-10 15:30 UTC (permalink / raw)
To: Josh Kupershmidt <schmiddy@gmail.com>; +Cc: pgsql-admin
Hmmmm...
What about
UPDATE pg_trigger SET tgenabled = false;
Restore data, and after done:
UPDATE pg_trigger SET tgenabled = true;
I'm going to test it.
-----Original Message-----
From: Josh Kupershmidt <schmiddy@gmail.com>
To: Iñigo Martinez Lasala <imartinez@vectorsf.com>
Cc: pgsql-admin <pgsql-admin@postgresql.org>
Subject: Re: [ADMIN] Disabling triggers with psql (gforge 7.4 to 8.2
migration)
Date: Wed, 10 Feb 2010 09:55:15 -0500
On Feb 10, 2010, at 4:30 AM, Iñigo Martinez Lasala wrote:
>
> Third one, and we haven't been able to fix it, is we cannot restore
> data dump via psql due to psql does not have an option to disable
> triggers. So, when restoring data, it fails. So... is there any way to
> disable in a psql session all triggers same way like with pg_restore
> --disable-triggers? Or can we convert plain text dump to be processed
> by pg_restore? Perhaps a table by table trigger disabling script?
>
How about:
1. restore your schema, with triggers, using a pg_dump
--schema-only ... ; pg_restore ...
2. Create a psql-loadable data-only dump using pg_dump --data-only
--disable-triggers --format=p ...
3. clean the data-only dump and restore
Or, you could do a full pg_dump -Fc ... of your database, then use
pg_restore to restore the compressed dumpfile into a plaintext file
(i.e. pg_restore [options] filename). Then run your cleanup on the
plaintext file, and reload.
Josh
^ permalink raw reply [nested|flat] 11+ messages in thread
* Re: Disabling triggers with psql (gforge 7.4 to 8.2 migration)
@ 2010-02-10 16:08 Josh Kupershmidt <schmiddy@gmail.com>
parent: Iñigo Martinez Lasala <imartinez@vectorsf.com>
0 siblings, 1 reply; 11+ messages in thread
From: Josh Kupershmidt @ 2010-02-10 16:08 UTC (permalink / raw)
To: Iñigo Martinez Lasala <imartinez@vectorsf.com>; +Cc: pgsql-admin
[Resending, forgot to CC list]
On Wed, Feb 10, 2010 at 10:47 AM, Josh Kupershmidt <schmiddy@gmail.com>wrote:
>
> On Wed, Feb 10, 2010 at 10:09 AM, Iñigo Martinez Lasala <
> imartinez@vectorsf.com> wrote:
>
>> Two questions.
>>
>> I could, of course, create a data-only dump (in fact I've already done
>> it). However, when restoring, I cannot use pg_restore since it's in plain
>> format, don't you? pg_restore only works with tar or compressed formats, I
>> think. I could restore data-only dump with psql, but then I've to disable
>> triggers and psql does not have an option in order to disable them.
>>
>>
> Here's what I meant by the first routine. Let's dump database "test" and
> restore into database "restoration".
>
> pg_dump --schema-only -Ujosh --format=c --file=test.schema.pgdump test
> pg_restore -Ujosh --dbname=restoration test.schema.pgdump
> pg_dump --data-only -Ujosh --format=p --disable-triggers
> --file=test.data.pgdump test
> # clean up test.data.pgdump here
> psql -Ujosh restoration < test.data.pgdump
>
> So for the restoration of the actual data, you'd use psql, but the
> disabling of triggers would be handled for you (you should see ALTER TABLE
> ... DISABLE TRIGGER ALL; and ALTER TABLE ... ENABLE TRIGGER ALL; or similar
> in test.data.pgdump)
>
> Second one. You say I could restore a compressed dumpfile into a plaintext
>> file. Is this possible? How? And after cleaning this plaintext file, how do
>> I restore it again into database without using psql since pg_restore only
>> accept tar or compressed file formats?
>>
>
> To turn a pg_dump file which was dumped with, say, --format=c into a
> plaintext file loadable by SQL:
>
> pg_dump -Ujosh --format=c --file=test.Fc.pgdump test
> pg_restore test.Fc.pgdump > test.plaintext.pgdump
> # clean up test.plaintext.pgdump here
> psql -Ujosh restoration < test.plaintext.pgdump
>
> This was the second option I mentioned. You would then have to use psql to
> restore this plaintext file. You might be able to jump through some hoops
> and turn the plaintext dump back into a pg_restore compressed dump, but I
> don't see any point in this -- the plaintext dump here should have the
> CREATE TRIGGER statements after the table creation and population steps,
> which is likely exactly what you want.
>
> Josh
>
^ permalink raw reply [nested|flat] 11+ messages in thread
* Re: Disabling triggers with psql (gforge 7.4 to 8.2 migration)
@ 2010-02-10 16:10 Josh Kupershmidt <schmiddy@gmail.com>
parent: Iñigo Martinez Lasala <imartinez@vectorsf.com>
0 siblings, 0 replies; 11+ messages in thread
From: Josh Kupershmidt @ 2010-02-10 16:10 UTC (permalink / raw)
To: Iñigo Martinez Lasala <imartinez@vectorsf.com>; +Cc: pgsql-admin
[Forgot to CC list, again]
Found the doc. page on pg_trigger I was looking for. You were right,
pg_trigger changed between 8.2 and 8.3:
http://www.postgresql.org/docs/8.2/static/catalog-pg-trigger.html
http://www.postgresql.org/docs/8.3/static/catalog-pg-trigger.html
Josh
On Wed, Feb 10, 2010 at 11:03 AM, Josh Kupershmidt <schmiddy@gmail.com>wrote:
> On Wed, Feb 10, 2010 at 10:30 AM, Iñigo Martinez Lasala <
> imartinez@vectorsf.com> wrote:
>
>> Hmmmm...
>>
>> What about
>> UPDATE pg_trigger SET tgenabled = false;
>>
>> Restore data, and after done:
>> UPDATE pg_trigger SET tgenabled = true;
>>
>> I'm going to test it.
>>
>>
> Perhaps this was still a boolean column in 8.2, but at least in 8.3 and
> above tgenabled is a "char" field. The only explanation I found of its
> values is here:
> http://archives.postgresql.org/pgsql-hackers/2007-01/msg01302.php
>
> Anyway, I suspect your idea will work, but if you're going to the trouble
> of disabling+reenabling triggers for performance reasons, you might still be
> better off with pg_restore, since it can handle creation of constraints and
> indexes at the appropriate time as well, which can really help.
>
> Josh
>
^ permalink raw reply [nested|flat] 11+ messages in thread
* Re: Disabling triggers with psql (gforge 7.4 to 8.2 migration)
@ 2010-02-10 16:21 Alvaro Herrera <alvherre@commandprompt.com>
parent: Iñigo Martinez Lasala <imartinez@vectorsf.com>
2 siblings, 1 reply; 11+ messages in thread
From: Alvaro Herrera @ 2010-02-10 16:21 UTC (permalink / raw)
To: Iñigo Martinez Lasala <imartinez@vectorsf.com>; +Cc: pgsql-admin
Iñigo Martinez Lasala wrote:
> Third one, and we haven't been able to fix it, is we cannot restore data
> dump via psql due to psql does not have an option to disable triggers.
> So, when restoring data, it fails. So... is there any way to disable in
> a psql session all triggers same way like with pg_restore
> --disable-triggers? Or can we convert plain text dump to be processed
> by pg_restore? Perhaps a table by table trigger disabling script?
Have you tried using 8.2's pg_dump instead of the old one?
--
Alvaro Herrera http://www.CommandPrompt.com/
PostgreSQL Replication, Consulting, Custom Development, 24x7 support
^ permalink raw reply [nested|flat] 11+ messages in thread
* Re: Disabling triggers with psql (gforge 7.4 to 8.2 migration)
@ 2010-02-10 16:59 Iñigo Martinez Lasala <imartinez@vectorsf.com>
parent: Alvaro Herrera <alvherre@commandprompt.com>
0 siblings, 1 reply; 11+ messages in thread
From: Iñigo Martinez Lasala @ 2010-02-10 16:59 UTC (permalink / raw)
To: Alvaro Herrera <alvherre@commandprompt.com>; +Cc: pgsql-admin
Hmm...
No, I've not tried it. Does pg_dump perform some kind of truncating over
bad chars? If yes, my problem would be solved!
When actual test finish, I will try again with pg_dump from 8.2
Thank you, Alvaro.
-----Original Message-----
From: Alvaro Herrera <alvherre@commandprompt.com>
To: Iñigo Martinez Lasala <imartinez@vectorsf.com>
Cc: pgsql-admin <pgsql-admin@postgresql.org>
Subject: Re: [ADMIN] Disabling triggers with psql (gforge 7.4 to 8.2
migration)
Date: Wed, 10 Feb 2010 13:21:04 -0300
Iñigo Martinez Lasala wrote:
> Third one, and we haven't been able to fix it, is we cannot restore data
> dump via psql due to psql does not have an option to disable triggers.
> So, when restoring data, it fails. So... is there any way to disable in
> a psql session all triggers same way like with pg_restore
> --disable-triggers? Or can we convert plain text dump to be processed
> by pg_restore? Perhaps a table by table trigger disabling script?
Have you tried using 8.2's pg_dump instead of the old one?
--
Alvaro Herrera http://www.CommandPrompt.com/
PostgreSQL Replication, Consulting, Custom Development, 24x7 support
^ permalink raw reply [nested|flat] 11+ messages in thread
* Re: Disabling triggers with psql (gforge 7.4 to 8.2 migration)
@ 2010-02-10 17:09 Alvaro Herrera <alvherre@commandprompt.com>
parent: Iñigo Martinez Lasala <imartinez@vectorsf.com>
0 siblings, 0 replies; 11+ messages in thread
From: Alvaro Herrera @ 2010-02-10 17:09 UTC (permalink / raw)
To: Iñigo Martinez Lasala <imartinez@vectorsf.com>; +Cc: pgsql-admin
Iñigo Martinez Lasala wrote:
> Hmm...
> No, I've not tried it. Does pg_dump perform some kind of truncating over
> bad chars? If yes, my problem would be solved!
No, I was thinking in the disabling of triggers ...
--
Alvaro Herrera http://www.CommandPrompt.com/
PostgreSQL Replication, Consulting, Custom Development, 24x7 support
^ permalink raw reply [nested|flat] 11+ messages in thread
* Re: Disabling triggers with psql (gforge 7.4 to 8.2 migration)
@ 2010-02-11 09:17 Iñigo Martinez Lasala <imartinez@vectorsf.com>
parent: Josh Kupershmidt <schmiddy@gmail.com>
0 siblings, 0 replies; 11+ messages in thread
From: Iñigo Martinez Lasala @ 2010-02-11 09:17 UTC (permalink / raw)
To: Josh Kupershmidt <schmiddy@gmail.com>; +Cc: pgsql-admin
Hi Josh.
I have followed your suggestion and restored bad tables into a file.
This has shortened the conversion process since I've only restored to
file bad chars tables, and only 8 showed this issue. So, instead of
having to fix full dump (about 45G) I only had to process 10MB (8
tables). This is what I've done:
- Dump schema, fix it in order to accomodate to postgres 8.2, and import
into database via psql.
- Dump data and import into database via pg_restore with triggers
disabled.
pg_dump -f gforge-database.dmp -Fc -a -O --disable-triggers -x -E utf-8
-U gforge -h 192.168.7.54 gforge -W
pg_restore -Fc -a -O --disable-triggers -x -U gforge -d gforge
gforge-database.dmp 2>import-error.log
- Locate in import-log what tables have problem (8 in my import9.
- Restore bad tables into plain text files:
pg_restore -t artifact ../gforge.dmp > artifact.dmp
pg_restore -t artifact_history ../gforge.dmp > artifact_history.dmp
pg_restore -t artifact_idx ../gforge.dmp > artifact_idx.dmp
pg_restore -t doc_data_idx ../gforge.dmp > doc_data_idx.dmp
pg_restore -t frs_release_idx ../gforge.dmp > frs_release_idx.dmp
pg_restore -t groups_idx ../gforge.dmp > groups_idx.dmp
pg_restore -t project_task_idx ../gforge.dmp > project_task_idx.dmp
pg_restore -t users_idx ../gforge.dmp > users_idx.dmp
- Modify each dump file, changing set client enconding from UTF-8 to
ISO-8859-1 (it appears that this was my problem, ISO-8859-1 chars in
database that had not been properly converted to UTF-8)
SET client_encoding = 'UTF8';
Alternatively, you could user iconv in order to eliminate bad chars
(iconv -f utf-8 -t utf-8 -c -f table_exported.dmp >
table_exported_fixed.dmp). But truncating bad chars could lead to errors
when importing since some registers could become NULL registers and fail
on import.
- Import each table DISABLING TRIGERS temporary
(add ALTER TABLE tablename DISABLE TRIGGER ALL; at beginning and ALTER
TABLE tablename ENABLE TRIGGER ALL; at the end).
Et voila. Import finished.
Thank you very much to all for your suggestions. They have been very
useful for me.
-----Original Message-----
From: Josh Kupershmidt <schmiddy@gmail.com>
To: Iñigo Martinez Lasala <imartinez@vectorsf.com>
Cc: pgsql-admin@postgresql.org
Subject: Re: [ADMIN] Disabling triggers with psql (gforge 7.4 to 8.2
migration)
Date: Wed, 10 Feb 2010 11:08:53 -0500
[Resending, forgot to CC list]
On Wed, Feb 10, 2010 at 10:47 AM, Josh Kupershmidt <schmiddy@gmail.com>
wrote:
On Wed, Feb 10, 2010 at 10:09 AM, Iñigo Martinez Lasala
<imartinez@vectorsf.com> wrote:
Two questions.
I could, of course, create a data-only dump (in fact
I've already done it). However, when restoring, I cannot
use pg_restore since it's in plain format, don't you?
pg_restore only works with tar or compressed formats, I
think. I could restore data-only dump with psql, but
then I've to disable triggers and psql does not have an
option in order to disable them.
Here's what I meant by the first routine. Let's dump database
"test" and restore into database "restoration".
pg_dump --schema-only -Ujosh --format=c
--file=test.schema.pgdump test
pg_restore -Ujosh --dbname=restoration test.schema.pgdump
pg_dump --data-only -Ujosh --format=p --disable-triggers
--file=test.data.pgdump test
# clean up test.data.pgdump here
psql -Ujosh restoration < test.data.pgdump
So for the restoration of the actual data, you'd use psql, but
the disabling of triggers would be handled for you (you should
see ALTER TABLE ... DISABLE TRIGGER ALL; and ALTER TABLE ...
ENABLE TRIGGER ALL; or similar in test.data.pgdump)
Second one. You say I could restore a compressed
dumpfile into a plaintext file. Is this possible? How?
And after cleaning this plaintext file, how do I restore
it again into database without using psql since
pg_restore only accept tar or compressed file formats?
To turn a pg_dump file which was dumped with, say, --format=c
into a plaintext file loadable by SQL:
pg_dump -Ujosh --format=c --file=test.Fc.pgdump test
pg_restore test.Fc.pgdump > test.plaintext.pgdump
# clean up test.plaintext.pgdump here
psql -Ujosh restoration < test.plaintext.pgdump
This was the second option I mentioned. You would then have to
use psql to restore this plaintext file. You might be able to
jump through some hoops and turn the plaintext dump back into a
pg_restore compressed dump, but I don't see any point in this --
the plaintext dump here should have the CREATE TRIGGER
statements after the table creation and population steps, which
is likely exactly what you want.
Josh
^ permalink raw reply [nested|flat] 11+ messages in thread
end of thread, other threads:[~2010-02-11 09:17 UTC | newest]
Thread overview: 11+ messages (download: mbox mbox.gz follow: Atom feed)
-- links below jump to the message on this page --
2010-02-10 09:30 Disabling triggers with psql (gforge 7.4 to 8.2 migration) Iñigo Martinez Lasala <imartinez@vectorsf.com>
2010-02-10 11:34 ` Iñigo Martinez Lasala <imartinez@vectorsf.com>
2010-02-10 14:55 ` Josh Kupershmidt <schmiddy@gmail.com>
2010-02-10 15:09 ` Iñigo Martinez Lasala <imartinez@vectorsf.com>
2010-02-10 16:08 ` Josh Kupershmidt <schmiddy@gmail.com>
2010-02-11 09:17 ` Iñigo Martinez Lasala <imartinez@vectorsf.com>
2010-02-10 15:30 ` Iñigo Martinez Lasala <imartinez@vectorsf.com>
2010-02-10 16:10 ` Josh Kupershmidt <schmiddy@gmail.com>
2010-02-10 16:21 ` Alvaro Herrera <alvherre@commandprompt.com>
2010-02-10 16:59 ` Iñigo Martinez Lasala <imartinez@vectorsf.com>
2010-02-10 17:09 ` Alvaro Herrera <alvherre@commandprompt.com>
This inbox is served by DDX for PostgreSQL; see mirroring instructions
for how to clone and mirror all data and code used for this inbox