pg.ddx.io pgsql-admin@postgresql.org mailing list archive
help / color / mirror / Atom feed9.5 repo question
11+ messages / 3 participants
[nested] [flat]
* 9.5 repo question
@ 2016-01-27 15:45 John Scalia <jayknowsunix@gmail.com>
0 siblings, 1 reply; 11+ messages in thread
From: John Scalia @ 2016-01-27 15:45 UTC (permalink / raw)
To: pgsql-admin
Hi all,
I'm wanting to test the most recent version of postgresql, so I went to
yum.postgresql.org and started looking in the repo for stuff to download.
Nearly every component there has 3 rpms, a rc1 copy in addition to a 1 and
2 rpm. My question is, do I need the rc1 rpm in addition to the 1 & 2
rpm's? Or which ones do I need exactly for each component? I've done a
little digging on the site, and I didn't really find any guidance.
Thanks in advance,
Jay
^ permalink raw reply [nested|flat] 11+ messages in thread
* Re: 9.5 repo question
@ 2016-01-27 16:48 Jeff Frost <jeff@pgexperts.com>
parent: John Scalia <jayknowsunix@gmail.com>
0 siblings, 1 reply; 11+ messages in thread
From: Jeff Frost @ 2016-01-27 16:48 UTC (permalink / raw)
To: John Scalia <jayknowsunix@gmail.com>; +Cc: pgsql-admin
On Jan 27, 2016, at 7:45 AM, John Scalia <jayknowsunix@gmail.com> wrote:
>
> I'm wanting to test the most recent version of postgresql, so I went to yum.postgresql.org <http://yum.postgresql.org/; and started looking in the repo for stuff to download. Nearly every component there has 3 rpms, a rc1 copy in addition to a 1 and 2 rpm. My question is, do I need the rc1 rpm in addition to the 1 & 2 rpm's? Or which ones do I need exactly for each component? I've done a little digging on the site, and I didn't really find any guidance.
You want the ones that are 9.5.0-<latest>. So, in the RHEL6/x86_64 repo, that is:
9.5.0-2PGDG.rhel6
If you let yum do the work for you, then after installing the appropriate repo RPM you can just: yum install postgresql95 and it’ll download and install the latest for you.
Hope that helps.=
^ permalink raw reply [nested|flat] 11+ messages in thread
* Re: 9.5 repo question
@ 2016-01-27 17:02 John Scalia <jayknowsunix@gmail.com>
parent: Jeff Frost <jeff@pgexperts.com>
0 siblings, 2 replies; 11+ messages in thread
From: John Scalia @ 2016-01-27 17:02 UTC (permalink / raw)
To: Jeff Frost <jeff@pgexperts.com>; +Cc: pgsql-admin
So, then don't bother with the rc1 rpms? Oh, and I can't use yum here to
download due to configuration issues, although I do use it for the actual
install.
On Wed, Jan 27, 2016 at 10:48 AM, Jeff Frost <jeff@pgexperts.com> wrote:
> On Jan 27, 2016, at 7:45 AM, John Scalia <jayknowsunix@gmail.com> wrote:
>
>
> I'm wanting to test the most recent version of postgresql, so I went to
> yum.postgresql.org and started looking in the repo for stuff to download.
> Nearly every component there has 3 rpms, a rc1 copy in addition to a 1 and
> 2 rpm. My question is, do I need the rc1 rpm in addition to the 1 & 2
> rpm's? Or which ones do I need exactly for each component? I've done a
> little digging on the site, and I didn't really find any guidance.
>
>
> You want the ones that are 9.5.0-<latest>. So, in the RHEL6/x86_64 repo,
> that is:
>
> 9.5.0-2PGDG.rhel6
>
> If you let yum do the work for you, then after installing the appropriate
> repo RPM you can just: yum install postgresql95 and it’ll download and
> install the latest for you.
>
> Hope that helps.
>
^ permalink raw reply [nested|flat] 11+ messages in thread
* Re: 9.5 repo question
@ 2016-01-27 17:08 Jeff Frost <jeff@pgexperts.com>
parent: John Scalia <jayknowsunix@gmail.com>
1 sibling, 1 reply; 11+ messages in thread
From: Jeff Frost @ 2016-01-27 17:08 UTC (permalink / raw)
To: John Scalia <jayknowsunix@gmail.com>; +Cc: pgsql-admin
> On Jan 27, 2016, at 9:02 AM, John Scalia <jayknowsunix@gmail.com> wrote:
>
> So, then don't bother with the rc1 rpms? Oh, and I can't use yum here to download due to configuration issues, although I do use it for the actual install.
rc1 RPMs are release candidate 1. 9.5.0 is the release, so that’s what you want going forward.
--
Sent via pgsql-admin mailing list (pgsql-admin@postgresql.org)
To make changes to your subscription:
http://www.postgresql.org/mailpref/pgsql-admin
^ permalink raw reply [nested|flat] 11+ messages in thread
* Re: 9.5 repo question
@ 2016-01-27 17:38 John Scalia <jayknowsunix@gmail.com>
parent: Jeff Frost <jeff@pgexperts.com>
0 siblings, 1 reply; 11+ messages in thread
From: John Scalia @ 2016-01-27 17:38 UTC (permalink / raw)
To: Jeff Frost <jeff@pgexperts.com>; +Cc: pgsql-admin
Thanks
On Wed, Jan 27, 2016 at 11:08 AM, Jeff Frost <jeff@pgexperts.com> wrote:
>
> > On Jan 27, 2016, at 9:02 AM, John Scalia <jayknowsunix@gmail.com> wrote:
> >
> > So, then don't bother with the rc1 rpms? Oh, and I can't use yum here
> to download due to configuration issues, although I do use it for the
> actual install.
>
> rc1 RPMs are release candidate 1. 9.5.0 is the release, so that’s what
> you want going forward.
^ permalink raw reply [nested|flat] 11+ messages in thread
* Re: 9.5 repo question
@ 2016-01-27 20:05 John Scalia <jayknowsunix@gmail.com>
parent: John Scalia <jayknowsunix@gmail.com>
0 siblings, 1 reply; 11+ messages in thread
From: John Scalia @ 2016-01-27 20:05 UTC (permalink / raw)
To: Jeff Frost <jeff@pgexperts.com>; +Cc: pgsql-admin
Umm... new problem. I first installed both
postgresql95-libs-9.5.0-1PGDG.rhel6.x86_64.rpm and the libs-2PGDG rpm. I
then tried installing postgresql-9.5.0-1PGDG.rhel.x86_64.rpm, but yum
complains that libs-1PGDG is not installed. I ran "yum list
postgresql95-libs" and, sure enough, it is reporting that only
libs-2PGDG.rhel is installed for the postgresql95-libs.x86_64 package. I've
tried getting around the problem by --skip-broken, but that didn't work
either, nor did the other yum suggestion to use -Va --nofiles --nodigest. I
also tried to reinstall libs-1PGDG, but that fails as well.
Any suggestions as to how to get everything installed?
On Wed, Jan 27, 2016 at 11:38 AM, John Scalia <jayknowsunix@gmail.com>
wrote:
> Thanks
>
> On Wed, Jan 27, 2016 at 11:08 AM, Jeff Frost <jeff@pgexperts.com> wrote:
>
>>
>> > On Jan 27, 2016, at 9:02 AM, John Scalia <jayknowsunix@gmail.com>
>> wrote:
>> >
>> > So, then don't bother with the rc1 rpms? Oh, and I can't use yum here
>> to download due to configuration issues, although I do use it for the
>> actual install.
>>
>> rc1 RPMs are release candidate 1. 9.5.0 is the release, so that’s what
>> you want going forward.
>
>
>
^ permalink raw reply [nested|flat] 11+ messages in thread
* Re: 9.5 repo question
@ 2016-01-27 21:58 Jeff Frost <jeff@pgexperts.com>
parent: John Scalia <jayknowsunix@gmail.com>
0 siblings, 1 reply; 11+ messages in thread
From: Jeff Frost @ 2016-01-27 21:58 UTC (permalink / raw)
To: John Scalia <jayknowsunix@gmail.com>; +Cc: pgsql-admin
> On Jan 27, 2016, at 12:05 PM, John Scalia <jayknowsunix@gmail.com> wrote:
>
> Umm... new problem. I first installed both postgresql95-libs-9.5.0-1PGDG.rhel6.x86_64.rpm and the libs-2PGDG rpm. I then tried installing postgresql-9.5.0-1PGDG.rhel.x86_64.rpm, but yum complains that libs-1PGDG is not installed. I ran "yum list postgresql95-libs" and, sure enough, it is reporting that only libs-2PGDG.rhel is installed for the postgresql95-libs.x86_64 package. I've tried getting around the problem by --skip-broken, but that didn't work either, nor did the other yum suggestion to use -Va --nofiles --nodigest. I also tried to reinstall libs-1PGDG, but that fails as well.
>
> Any suggestions as to how to get everything installed?
Yah, you don’t want any of the -1PGDG RPMs, only the -2PGDG RPMs.
--
Sent via pgsql-admin mailing list (pgsql-admin@postgresql.org)
To make changes to your subscription:
http://www.postgresql.org/mailpref/pgsql-admin
^ permalink raw reply [nested|flat] 11+ messages in thread
* Re: 9.5 repo question
@ 2016-01-28 01:51 John Scalia <jayknowsunix@gmail.com>
parent: Jeff Frost <jeff@pgexperts.com>
0 siblings, 0 replies; 11+ messages in thread
From: John Scalia @ 2016-01-28 01:51 UTC (permalink / raw)
To: Jeff Frost <jeff@pgexperts.com>; +Cc: pgsql-admin
Thanks, I'll try that tomorrow morning, when I get back to the office.
Sent from my iPad
> On Jan 27, 2016, at 3:58 PM, Jeff Frost <jeff@pgexperts.com> wrote:
>
>
>> On Jan 27, 2016, at 12:05 PM, John Scalia <jayknowsunix@gmail.com> wrote:
>>
>> Umm... new problem. I first installed both postgresql95-libs-9.5.0-1PGDG.rhel6.x86_64.rpm and the libs-2PGDG rpm. I then tried installing postgresql-9.5.0-1PGDG.rhel.x86_64.rpm, but yum complains that libs-1PGDG is not installed. I ran "yum list postgresql95-libs" and, sure enough, it is reporting that only libs-2PGDG.rhel is installed for the postgresql95-libs.x86_64 package. I've tried getting around the problem by --skip-broken, but that didn't work either, nor did the other yum suggestion to use -Va --nofiles --nodigest. I also tried to reinstall libs-1PGDG, but that fails as well.
>>
>> Any suggestions as to how to get everything installed?
>
> Yah, you don’t want any of the -1PGDG RPMs, only the -2PGDG RPMs.
--
Sent via pgsql-admin mailing list (pgsql-admin@postgresql.org)
To make changes to your subscription:
http://www.postgresql.org/mailpref/pgsql-admin
^ permalink raw reply [nested|flat] 11+ messages in thread
* Re: 9.5 repo question
@ 2016-02-01 12:35 jaime soler <jaime.soler@gmail.com>
parent: John Scalia <jayknowsunix@gmail.com>
1 sibling, 1 reply; 11+ messages in thread
From: jaime soler @ 2016-02-01 12:35 UTC (permalink / raw)
To: John Scalia <jayknowsunix@gmail.com>; Jeff Frost <jeff@pgexperts.com>; +Cc: pgsql-admin
El mié, 27-01-2016 a las 11:02 -0600, John Scalia escribió:
> So, then don't bother with the rc1 rpms? Oh, and I can't use yum
> here to download due to configuration issues, although I do use it
> for the actual install.
Well, you could use a local repo, mirroring yum.postgresql.org if you
have internet restrictions.
>
> On Wed, Jan 27, 2016 at 10:48 AM, Jeff Frost <jeff@pgexperts.com>
> wrote:
> > On Jan 27, 2016, at 7:45 AM, John Scalia <jayknowsunix@gmail.com>
> > wrote:
> > > I'm wanting to test the most recent version of postgresql, so I
> > > went to yum.postgresql.org and started looking in the repo for
> > > stuff to download. Nearly every component there has 3 rpms, a rc1
> > > copy in addition to a 1 and 2 rpm. My question is, do I need the
> > > rc1 rpm in addition to the 1 & 2 rpm's? Or which ones do I need
> > > exactly for each component? I've done a little digging on the
> > > site, and I didn't really find any guidance.
> > You want the ones that are 9.5.0-<latest>. So, in the RHEL6/x86_64
> > repo, that is:
> >
> > 9.5.0-2PGDG.rhel6
> >
> > If you let yum do the work for you, then after installing the
> > appropriate repo RPM you can just: yum install postgresql95 and
> > it’ll download and install the latest for you.
> >
> > Hope that helps.
> >
--
Sent via pgsql-admin mailing list (pgsql-admin@postgresql.org)
To make changes to your subscription:
http://www.postgresql.org/mailpref/pgsql-admin
^ permalink raw reply [nested|flat] 11+ messages in thread
* Re: 9.5 repo question
@ 2016-02-01 14:13 John Scalia <jayknowsunix@gmail.com>
parent: jaime soler <jaime.soler@gmail.com>
0 siblings, 1 reply; 11+ messages in thread
From: John Scalia @ 2016-02-01 14:13 UTC (permalink / raw)
To: jaime.soler@gmail.com; +Cc: Jeff Frost <jeff@pgexperts.com>; pgsql-admin
We do already have a local repo, but only packages that have been approved
by our security team get included. They haven't validated the latest
postgresql yet, that's actually what I'm trying to assist them with.
On Mon, Feb 1, 2016 at 6:35 AM, jaime soler <jaime.soler@gmail.com> wrote:
> El mié, 27-01-2016 a las 11:02 -0600, John Scalia escribió:
> > So, then don't bother with the rc1 rpms? Oh, and I can't use yum
> > here to download due to configuration issues, although I do use it
> > for the actual install.
>
> Well, you could use a local repo, mirroring yum.postgresql.org if you
> have internet restrictions.
> >
> > On Wed, Jan 27, 2016 at 10:48 AM, Jeff Frost <jeff@pgexperts.com>
> > wrote:
> > > On Jan 27, 2016, at 7:45 AM, John Scalia <jayknowsunix@gmail.com>
> > > wrote:
> > > > I'm wanting to test the most recent version of postgresql, so I
> > > > went to yum.postgresql.org and started looking in the repo for
> > > > stuff to download. Nearly every component there has 3 rpms, a rc1
> > > > copy in addition to a 1 and 2 rpm. My question is, do I need the
> > > > rc1 rpm in addition to the 1 & 2 rpm's? Or which ones do I need
> > > > exactly for each component? I've done a little digging on the
> > > > site, and I didn't really find any guidance.
> > > You want the ones that are 9.5.0-<latest>. So, in the RHEL6/x86_64
> > > repo, that is:
> > >
> > > 9.5.0-2PGDG.rhel6
> > >
> > > If you let yum do the work for you, then after installing the
> > > appropriate repo RPM you can just: yum install postgresql95 and
> > > it’ll download and install the latest for you.
> > >
> > > Hope that helps.
> > >
>
^ permalink raw reply [nested|flat] 11+ messages in thread
* Re: 9.5 repo question
@ 2016-02-01 14:24 jaime soler <jaime.soler@gmail.com>
parent: John Scalia <jayknowsunix@gmail.com>
0 siblings, 0 replies; 11+ messages in thread
From: jaime soler @ 2016-02-01 14:24 UTC (permalink / raw)
To: John Scalia <jayknowsunix@gmail.com>; +Cc: Jeff Frost <jeff@pgexperts.com>; pgsql-admin
El lun, 01-02-2016 a las 08:13 -0600, John Scalia escribió:
> We do already have a local repo, but only packages that have been
> approved by our security team get included. They haven't validated
> the latest postgresql yet, that's actually what I'm trying to assist
> them with.
Ok, goog luck. So I hope you'll use stable version only.
>
> On Mon, Feb 1, 2016 at 6:35 AM, jaime soler <jaime.soler@gmail.com>
> wrote:
> > El mié, 27-01-2016 a las 11:02 -0600, John Scalia escribió:
> > > So, then don't bother with the rc1 rpms? Oh, and I can't use yum
> > > here to download due to configuration issues, although I do use
> > it
> > > for the actual install.
> >
> > Well, you could use a local repo, mirroring yum.postgresql.org if
> > you
> > have internet restrictions.
> > >
> > > On Wed, Jan 27, 2016 at 10:48 AM, Jeff Frost <jeff@pgexperts.com>
> > > wrote:
> > > > On Jan 27, 2016, at 7:45 AM, John Scalia <
> > jayknowsunix@gmail.com>
> > > > wrote:
> > > > > I'm wanting to test the most recent version of postgresql, so
> > I
> > > > > went to yum.postgresql.org and started looking in the repo
> > for
> > > > > stuff to download. Nearly every component there has 3 rpms, a
> > rc1
> > > > > copy in addition to a 1 and 2 rpm. My question is, do I need
> > the
> > > > > rc1 rpm in addition to the 1 & 2 rpm's? Or which ones do I
> > need
> > > > > exactly for each component? I've done a little digging on the
> > > > > site, and I didn't really find any guidance.
> > > > You want the ones that are 9.5.0-<latest>. So, in the
> > RHEL6/x86_64
> > > > repo, that is:
> > > >
> > > > 9.5.0-2PGDG.rhel6
> > > >
> > > > If you let yum do the work for you, then after installing the
> > > > appropriate repo RPM you can just: yum install postgresql95 and
> > > > it’ll download and install the latest for you.
> > > >
> > > > Hope that helps.
> > > >
> >
--
Sent via pgsql-admin mailing list (pgsql-admin@postgresql.org)
To make changes to your subscription:
http://www.postgresql.org/mailpref/pgsql-admin
^ permalink raw reply [nested|flat] 11+ messages in thread
end of thread, other threads:[~2016-02-01 14:24 UTC | newest]
Thread overview: 11+ messages (download: mbox mbox.gz follow: Atom feed)
-- links below jump to the message on this page --
2016-01-27 15:45 9.5 repo question John Scalia <jayknowsunix@gmail.com>
2016-01-27 16:48 ` Jeff Frost <jeff@pgexperts.com>
2016-01-27 17:02 ` John Scalia <jayknowsunix@gmail.com>
2016-01-27 17:08 ` Jeff Frost <jeff@pgexperts.com>
2016-01-27 17:38 ` John Scalia <jayknowsunix@gmail.com>
2016-01-27 20:05 ` John Scalia <jayknowsunix@gmail.com>
2016-01-27 21:58 ` Jeff Frost <jeff@pgexperts.com>
2016-01-28 01:51 ` John Scalia <jayknowsunix@gmail.com>
2016-02-01 12:35 ` jaime soler <jaime.soler@gmail.com>
2016-02-01 14:13 ` John Scalia <jayknowsunix@gmail.com>
2016-02-01 14:24 ` jaime soler <jaime.soler@gmail.com>
This inbox is served by DDX for PostgreSQL; see mirroring instructions
for how to clone and mirror all data and code used for this inbox