pg.ddx.io pgsql-admin@postgresql.org mailing list archive
help / color / mirror / Atom feedPostgesql and SSL
10+ messages / 5 participants
[nested] [flat]
* Postgesql and SSL
@ 2009-02-28 22:18 Lukas <Lukas@fmf.vtu.lt>
2009-02-28 22:53 ` Re: Postgesql and SSL Glyn Astill <glynastill@yahoo.co.uk>
0 siblings, 1 reply; 10+ messages in thread
From: Lukas @ 2009-02-28 22:18 UTC (permalink / raw)
To: pgsql-admin
Hello,
I am trying to run PostgreSQL with SSL, so I compiled and linked with
options:
./configure --prefix=/DB --with-openssl
Configured and installed successfully.
In postgresql.conf I have option "ssl = on"
When starting Postgres I get error:
LOG: SSL is not supported by this build
FATAL: invalid value for parameter "ssl": 1
DEBUG: proc_exit(1)
DEBUG: shmem_exit(1)
DEBUG: exit(1)
Where is the problem? Is here versions which does not support SSL, it
would be strange..
Versions used:
PostgreSQL 8.3.4
OpenSSL 0.9.8j
--
Lukas
UAB nSoft
http://www.nsoft.lt
Lukas at nsoft.lt
+370 655 10 655
--
This message has been scanned for viruses and
dangerous content by OpenProtect(http://www.openprotect.com), and is
believed to be clean.
^ permalink raw reply [nested|flat] 10+ messages in thread
* Re: Postgesql and SSL
2009-02-28 22:18 Postgesql and SSL Lukas <Lukas@fmf.vtu.lt>
@ 2009-02-28 22:53 ` Glyn Astill <glynastill@yahoo.co.uk>
2009-03-01 08:37 ` Re: Postgesql and SSL Lukas <Lukas@fmf.vtu.lt>
0 siblings, 1 reply; 10+ messages in thread
From: Glyn Astill @ 2009-02-28 22:53 UTC (permalink / raw)
To: pgsql-admin; Lukas@fmf.vtu.lt
You defo have all the required openssl headers and libs and configure succeeds? It's a longshot, but I wonder if the prefix is somehow making configure read the string wrong? I've never really needed to use prefix, but what happend if you try
./configure --prefix='/DB' --with-openssl
or perhaps
./configure --with-openssl --prefix=/DB
--- On Sat, 28/2/09, Lukas <Lukas@fmf.vtu.lt> wrote:
> From: Lukas <Lukas@fmf.vtu.lt>
> Subject: [ADMIN] Postgesql and SSL
> To: pgsql-admin@postgresql.org
> Date: Saturday, 28 February, 2009, 10:18 PM
> Hello,
>
> I am trying to run PostgreSQL with SSL, so I compiled and
> linked with
> options:
>
> ./configure --prefix=/DB --with-openssl
>
> Configured and installed successfully.
> In postgresql.conf I have option "ssl = on"
> When starting Postgres I get error:
> LOG: SSL is not supported by this build
> FATAL: invalid value for parameter "ssl": 1
> DEBUG: proc_exit(1)
> DEBUG: shmem_exit(1)
> DEBUG: exit(1)
>
> Where is the problem? Is here versions which does not
> support SSL, it
> would be strange..
>
> Versions used:
> PostgreSQL 8.3.4
> OpenSSL 0.9.8j
>
>
>
> --
> Lukas
> UAB nSoft
> http://www.nsoft.lt
> Lukas at nsoft.lt
> +370 655 10 655
>
>
>
>
> --
> This message has been scanned for viruses and
> dangerous content by
> OpenProtect(http://www.openprotect.com), and is
> believed to be clean.
>
>
> --
> Sent via pgsql-admin mailing list
> (pgsql-admin@postgresql.org)
> To make changes to your subscription:
> http://www.postgresql.org/mailpref/pgsql-admin
^ permalink raw reply [nested|flat] 10+ messages in thread
* Re: Postgesql and SSL
2009-02-28 22:18 Postgesql and SSL Lukas <Lukas@fmf.vtu.lt>
2009-02-28 22:53 ` Re: Postgesql and SSL Glyn Astill <glynastill@yahoo.co.uk>
@ 2009-03-01 08:37 ` Lukas <Lukas@fmf.vtu.lt>
2009-03-01 12:49 ` Re: Postgesql and SSL Thomas Pundt <mlists@rp-online.de>
2009-03-01 12:49 ` Re: Postgesql and SSL Glyn Astill <glynastill@yahoo.co.uk>
0 siblings, 2 replies; 10+ messages in thread
From: Lukas @ 2009-03-01 08:37 UTC (permalink / raw)
To: pgsql-admin
Hello again,
nope, no use of it.. Situation stays the same.. Does any one have more
ideas?
--
Lukas
UAB nSoft
http://www.nsoft.lt
Lukas at nsoft.lt
+370 655 10 655
> You defo have all the required openssl headers and libs and configure
> succeeds? It's a longshot, but I wonder if the prefix is somehow making
> configure read the string wrong? I've never really needed to use prefix,
> but what happend if you try
>
> ./configure --prefix='/DB' --with-openssl
>
> or perhaps
>
> ./configure --with-openssl --prefix=/DB
>
>
>
> --- On Sat, 28/2/09, Lukas <Lukas@fmf.vtu.lt> wrote:
>
>> From: Lukas <Lukas@fmf.vtu.lt>
>> Subject: [ADMIN] Postgesql and SSL
>> To: pgsql-admin@postgresql.org
>> Date: Saturday, 28 February, 2009, 10:18 PM
>> Hello,
>>
>> I am trying to run PostgreSQL with SSL, so I compiled and
>> linked with
>> options:
>>
>> ./configure --prefix=/DB --with-openssl
>>
>> Configured and installed successfully.
>> In postgresql.conf I have option "ssl = on"
>> When starting Postgres I get error:
>> LOG: SSL is not supported by this build
>> FATAL: invalid value for parameter "ssl": 1
>> DEBUG: proc_exit(1)
>> DEBUG: shmem_exit(1)
>> DEBUG: exit(1)
>>
>> Where is the problem? Is here versions which does not
>> support SSL, it
>> would be strange..
>>
>> Versions used:
>> PostgreSQL 8.3.4
>> OpenSSL 0.9.8j
>>
>>
>>
>> --
>> Lukas
>> UAB nSoft
>> http://www.nsoft.lt
>> Lukas at nsoft.lt
>> +370 655 10 655
>>
>>
>>
>>
>> --
>> This message has been scanned for viruses and
>> dangerous content by
>> OpenProtect(http://www.openprotect.com), and is
>> believed to be clean.
>>
>>
>> --
>> Sent via pgsql-admin mailing list
>> (pgsql-admin@postgresql.org)
>> To make changes to your subscription:
>> http://www.postgresql.org/mailpref/pgsql-admin
>
>
>
>
> --
> Sent via pgsql-admin mailing list (pgsql-admin@postgresql.org)
> To make changes to your subscription:
> http://www.postgresql.org/mailpref/pgsql-admin
>
> --
> This message has been scanned for viruses and
> dangerous content by OpenProtect(http://www.openprotect.com), and is
> believed to be clean.
>
>
--
This message has been scanned for viruses and
dangerous content by OpenProtect(http://www.openprotect.com), and is
believed to be clean.
^ permalink raw reply [nested|flat] 10+ messages in thread
* Re: Postgesql and SSL
2009-02-28 22:18 Postgesql and SSL Lukas <Lukas@fmf.vtu.lt>
2009-02-28 22:53 ` Re: Postgesql and SSL Glyn Astill <glynastill@yahoo.co.uk>
2009-03-01 08:37 ` Re: Postgesql and SSL Lukas <Lukas@fmf.vtu.lt>
@ 2009-03-01 12:49 ` Thomas Pundt <mlists@rp-online.de>
2009-03-01 16:54 ` Re: Postgesql and SSL Tom Lane <tgl@sss.pgh.pa.us>
1 sibling, 1 reply; 10+ messages in thread
From: Thomas Pundt @ 2009-03-01 12:49 UTC (permalink / raw)
To: Lukas@fmf.vtu.lt; +Cc: pgsql-admin
Lukas schrieb:
> nope, no use of it.. Situation stays the same.. Does any one have more
> ideas?
[...]
>>> I am trying to run PostgreSQL with SSL, so I compiled and
>>> linked with
>>> options:
>>>
>>> ./configure --prefix=/DB --with-openssl
>>>
>>> Configured and installed successfully.
>>> In postgresql.conf I have option "ssl = on"
>>> When starting Postgres I get error:
>>> LOG: SSL is not supported by this build
>>> FATAL: invalid value for parameter "ssl": 1
>>> DEBUG: proc_exit(1)
>>> DEBUG: shmem_exit(1)
>>> DEBUG: exit(1)
>>>
>>> Where is the problem? Is here versions which does not
>>> support SSL, it
>>> would be strange..
>>>
>>> Versions used:
>>> PostgreSQL 8.3.4
>>> OpenSSL 0.9.8j
well, probably; in a situation like this I'd first check for any errors
from the configure step. Did it by any chance complain about not
finding the SSL library?
Next thing to check: is the postmaster linked against the SSL library?
cd /your/postgres/install/path/bin
ldd postgres|grep ssl
should output something like
libssl.so.0.9.7 => /usr/lib64/libssl.so.0.9.7 (0x0000002a95775000)
if not, SSL is likely not compiled in; go back to checking the
configure part.
If you have positively confirmed, that SSL support is compiled in,
you likely simply don't use your newly built postgres. Check paths
and start scripts and make sure, it uses your new built binaries.
If that's not it, I think you have to provide more information about
your platform.
Ciao,
Thomas
^ permalink raw reply [nested|flat] 10+ messages in thread
* Re: Postgesql and SSL
2009-02-28 22:18 Postgesql and SSL Lukas <Lukas@fmf.vtu.lt>
2009-02-28 22:53 ` Re: Postgesql and SSL Glyn Astill <glynastill@yahoo.co.uk>
2009-03-01 08:37 ` Re: Postgesql and SSL Lukas <Lukas@fmf.vtu.lt>
2009-03-01 12:49 ` Re: Postgesql and SSL Thomas Pundt <mlists@rp-online.de>
@ 2009-03-01 16:54 ` Tom Lane <tgl@sss.pgh.pa.us>
0 siblings, 0 replies; 10+ messages in thread
From: Tom Lane @ 2009-03-01 16:54 UTC (permalink / raw)
To: thomas.pundt@rp-online.de; +Cc: Lukas@fmf.vtu.lt; pgsql-admin
Thomas Pundt <mlists@rp-online.de> writes:
> Lukas schrieb:
>>> I am trying to run PostgreSQL with SSL, so I compiled and
>>> linked with
>>> options:
>>> ./configure --prefix=/DB --with-openssl
> well, probably; in a situation like this I'd first check for any errors
> from the configure step.
Yeah. I would say this is pilot error somewhere along the line: either
the configure/build process failed, or you forgot to "make install"
afterwards, or the copy of the postmaster you're trying to start isn't
the one you built. Given the nonstandard install location specified
above, the last one seems particularly likely.
regards, tom lane
^ permalink raw reply [nested|flat] 10+ messages in thread
* Re: Postgesql and SSL
2009-02-28 22:18 Postgesql and SSL Lukas <Lukas@fmf.vtu.lt>
2009-02-28 22:53 ` Re: Postgesql and SSL Glyn Astill <glynastill@yahoo.co.uk>
2009-03-01 08:37 ` Re: Postgesql and SSL Lukas <Lukas@fmf.vtu.lt>
@ 2009-03-01 12:49 ` Glyn Astill <glynastill@yahoo.co.uk>
1 sibling, 0 replies; 10+ messages in thread
From: Glyn Astill @ 2009-03-01 12:49 UTC (permalink / raw)
To: pgsql-admin; Lukas@fmf.vtu.lt
have you generated the ssl certificates too?
--- On Sun, 1/3/09, Lukas <Lukas@fmf.vtu.lt> wrote:
> From: Lukas <Lukas@fmf.vtu.lt>
> Subject: Re: [ADMIN] Postgesql and SSL
> To: pgsql-admin@postgresql.org
> Date: Sunday, 1 March, 2009, 8:37 AM
> Hello again,
>
> nope, no use of it.. Situation stays the same.. Does any
> one have more
> ideas?
>
>
> --
> Lukas
> UAB nSoft
> http://www.nsoft.lt
> Lukas at nsoft.lt
> +370 655 10 655
>
>
> > You defo have all the required openssl headers and
> libs and configure
> > succeeds? It's a longshot, but I wonder if the
> prefix is somehow making
> > configure read the string wrong? I've never really
> needed to use prefix,
> > but what happend if you try
> >
> > ./configure --prefix='/DB' --with-openssl
> >
> > or perhaps
> >
> > ./configure --with-openssl --prefix=/DB
> >
> >
> >
> > --- On Sat, 28/2/09, Lukas <Lukas@fmf.vtu.lt>
> wrote:
> >
> >> From: Lukas <Lukas@fmf.vtu.lt>
> >> Subject: [ADMIN] Postgesql and SSL
> >> To: pgsql-admin@postgresql.org
> >> Date: Saturday, 28 February, 2009, 10:18 PM
> >> Hello,
> >>
> >> I am trying to run PostgreSQL with SSL, so I
> compiled and
> >> linked with
> >> options:
> >>
> >> ./configure --prefix=/DB --with-openssl
> >>
> >> Configured and installed successfully.
> >> In postgresql.conf I have option "ssl =
> on"
> >> When starting Postgres I get error:
> >> LOG: SSL is not supported by this build
> >> FATAL: invalid value for parameter
> "ssl": 1
> >> DEBUG: proc_exit(1)
> >> DEBUG: shmem_exit(1)
> >> DEBUG: exit(1)
> >>
> >> Where is the problem? Is here versions which does
> not
> >> support SSL, it
> >> would be strange..
> >>
> >> Versions used:
> >> PostgreSQL 8.3.4
> >> OpenSSL 0.9.8j
> >>
> >>
> >>
> >> --
> >> Lukas
> >> UAB nSoft
> >> http://www.nsoft.lt
> >> Lukas at nsoft.lt
> >> +370 655 10 655
> >>
> >>
> >>
> >>
> >> --
> >> This message has been scanned for viruses and
> >> dangerous content by
> >> OpenProtect(http://www.openprotect.com), and is
> >> believed to be clean.
> >>
> >>
> >> --
> >> Sent via pgsql-admin mailing list
> >> (pgsql-admin@postgresql.org)
> >> To make changes to your subscription:
> >> http://www.postgresql.org/mailpref/pgsql-admin
> >
> >
> >
> >
> > --
> > Sent via pgsql-admin mailing list
> (pgsql-admin@postgresql.org)
> > To make changes to your subscription:
> > http://www.postgresql.org/mailpref/pgsql-admin
> >
> > --
> > This message has been scanned for viruses and
> > dangerous content by
> OpenProtect(http://www.openprotect.com), and is
> > believed to be clean.
> >
> >
>
>
>
> --
> This message has been scanned for viruses and
> dangerous content by
> OpenProtect(http://www.openprotect.com), and is
> believed to be clean.
>
>
> --
> Sent via pgsql-admin mailing list
> (pgsql-admin@postgresql.org)
> To make changes to your subscription:
> http://www.postgresql.org/mailpref/pgsql-admin
^ permalink raw reply [nested|flat] 10+ messages in thread
* Re: Postgesql and SSL
@ 2010-03-19 06:33 Kiswono Prayogo <kiswono@gmail.com>
2010-03-19 06:48 ` Re: Postgesql and SSL Kiswono Prayogo <kiswono@gmail.com>
0 siblings, 1 reply; 10+ messages in thread
From: Kiswono Prayogo @ 2010-03-19 06:33 UTC (permalink / raw)
To: pgsql-admin
Hi, i had the same problem building using latest cvs, it works fine on
64-bit ubuntu, but on 32-bit ubuntu (virtualbox) when i started the
postgres it shows:
# idir=/home/`whoami`/Software/PostgreSQL-9
# sudo su -p postgres -c "$idir/bin/postgres -D $idir/data" ;
LOG: SSL is not supported by this build
FATAL: invalid value for parameter "ssl": 1
* normally on my 64-bit, it shows:
LOG: database system was shut down at 2010-03-19 12:02:00 WIT
LOG: autovacuum launcher started
LOG: database system is ready to accept connections
... query errors goes here ...^C
LOG: received fast shutdown request
LOG: aborting any active transactions
LOG: autovacuum launcher shutting down
LOG: shutting down
LOG: database system is shut down
* my configuration (32-bit and 64-bit differ only on shared_buffers value)
# idir=/home/`whoami`/Software/PostgreSQL-9
# sudo cat $idir/data/postgresql.conf | egrep -v "^\s*(#|$)"
listen_addresses = 'localhost' # what IP address(es) to listen on;
port = 5432 # (change requires restart)
max_connections = 100 # (change requires restart)
unix_socket_directory = '/tmp' # (change requires restart)
ssl = true # (change requires restart)
password_encryption = on
shared_buffers = 28MB # min 128kB
datestyle = 'iso, mdy'
lc_messages = 'en_US.UTF-8' # locale for system
error message
lc_monetary = 'en_US.UTF-8' # locale for monetary formatting
lc_numeric = 'en_US.UTF-8' # locale for number formatting
lc_time = 'en_US.UTF-8' # locale for time formatting
default_text_search_config = 'pg_catalog.english'
* my build configuration:
# idir=/home/`whoami`/Software/PostgreSQL-9
# ./configure --with-pam --with-openssl --with-libxml --with-libxslt
--prefix=$idir && make && make install
* installed libraries (dpkg -l | grep ssl):
libssl-dev 0.9.8g-16ubuntu3.1
openssl 0.9.8g-16ubuntu3.1
libssl0.9.8 0.9.8g-16ubuntu3.1
* full script for download, compile and configuring
http://pastebin.com/vmzryH82
--
Regards,
Kiswono P
GB
^ permalink raw reply [nested|flat] 10+ messages in thread
* Re: Postgesql and SSL
2010-03-19 06:33 Re: Postgesql and SSL Kiswono Prayogo <kiswono@gmail.com>
@ 2010-03-19 06:48 ` Kiswono Prayogo <kiswono@gmail.com>
2010-03-19 07:14 ` Re: Postgesql and SSL Kiswono Prayogo <kiswono@gmail.com>
0 siblings, 1 reply; 10+ messages in thread
From: Kiswono Prayogo @ 2010-03-19 06:48 UTC (permalink / raw)
To: pgsql-admin
oh yeah i forgot to show you that it's linked successfully:
# sudo ldd /home/`whoami`/Software/PostgreSQL-9/bin/* | grep ssl
libssl.so.0.9.8 => /lib/i686/cmov/libssl.so.0.9.8 (0x00cc4000)
libssl.so.0.9.8 => /lib/i686/cmov/libssl.so.0.9.8 (0x00214000)
libssl.so.0.9.8 => /lib/i686/cmov/libssl.so.0.9.8 (0x00e9b000)
libssl.so.0.9.8 => /lib/i686/cmov/libssl.so.0.9.8 (0x00110000)
libssl.so.0.9.8 => /lib/i686/cmov/libssl.so.0.9.8 (0x00110000)
libssl.so.0.9.8 => /lib/i686/cmov/libssl.so.0.9.8 (0x0044f000)
libssl.so.0.9.8 => /lib/i686/cmov/libssl.so.0.9.8 (0x0061b000)
libssl.so.0.9.8 => /lib/i686/cmov/libssl.so.0.9.8 (0x00110000)
libssl.so.0.9.8 => /lib/i686/cmov/libssl.so.0.9.8 (0x004fb000)
libssl.so.0.9.8 => /lib/i686/cmov/libssl.so.0.9.8 (0x00b1a000)
libssl.so.0.9.8 => /lib/i686/cmov/libssl.so.0.9.8 (0x00284000)
libssl.so.0.9.8 => /lib/i686/cmov/libssl.so.0.9.8 (0x00135000)
libssl.so.0.9.8 => /lib/i686/cmov/libssl.so.0.9.8 (0x004b6000)
libssl.so.0.9.8 => /lib/i686/cmov/libssl.so.0.9.8 (0x00603000)
On Fri, Mar 19, 2010 at 1:33 PM, Kiswono Prayogo <kiswono@gmail.com> wrote:
> Hi, i had the same problem building using latest cvs, it works fine on
> 64-bit ubuntu, but on 32-bit ubuntu (virtualbox) when i started the
> postgres it shows:
> # idir=/home/`whoami`/Software/PostgreSQL-9
> # sudo su -p postgres -c "$idir/bin/postgres -D $idir/data" ;
> LOG: SSL is not supported by this build
> FATAL: invalid value for parameter "ssl": 1
>
> * normally on my 64-bit, it shows:
> LOG: database system was shut down at 2010-03-19 12:02:00 WIT
> LOG: autovacuum launcher started
> LOG: database system is ready to accept connections
> ... query errors goes here ...^C
> LOG: received fast shutdown request
> LOG: aborting any active transactions
> LOG: autovacuum launcher shutting down
> LOG: shutting down
> LOG: database system is shut down
>
> * my configuration (32-bit and 64-bit differ only on shared_buffers value)
> # idir=/home/`whoami`/Software/PostgreSQL-9
> # sudo cat $idir/data/postgresql.conf | egrep -v "^\s*(#|$)"
> listen_addresses = 'localhost' # what IP address(es) to listen on;
> port = 5432 # (change requires restart)
> max_connections = 100 # (change requires restart)
> unix_socket_directory = '/tmp' # (change requires restart)
> ssl = true # (change requires restart)
> password_encryption = on
> shared_buffers = 28MB # min 128kB
> datestyle = 'iso, mdy'
> lc_messages = 'en_US.UTF-8' # locale for system
> error message
> lc_monetary = 'en_US.UTF-8' # locale for monetary formatting
> lc_numeric = 'en_US.UTF-8' # locale for number formatting
> lc_time = 'en_US.UTF-8' # locale for time formatting
> default_text_search_config = 'pg_catalog.english'
>
> * my build configuration:
> # idir=/home/`whoami`/Software/PostgreSQL-9
> # ./configure --with-pam --with-openssl --with-libxml --with-libxslt
> --prefix=$idir && make && make install
>
> * installed libraries (dpkg -l | grep ssl):
> libssl-dev 0.9.8g-16ubuntu3.1
> openssl 0.9.8g-16ubuntu3.1
> libssl0.9.8 0.9.8g-16ubuntu3.1
>
> * full script for download, compile and configuring
> http://pastebin.com/vmzryH82
>
> --
> Regards,
> Kiswono P
> GB
>
--
Regards,
Kiswono P
GB
^ permalink raw reply [nested|flat] 10+ messages in thread
* Re: Postgesql and SSL
2010-03-19 06:33 Re: Postgesql and SSL Kiswono Prayogo <kiswono@gmail.com>
2010-03-19 06:48 ` Re: Postgesql and SSL Kiswono Prayogo <kiswono@gmail.com>
@ 2010-03-19 07:14 ` Kiswono Prayogo <kiswono@gmail.com>
2010-03-19 11:49 ` Re: Postgesql and SSL Kiswono Prayogo <kiswono@gmail.com>
0 siblings, 1 reply; 10+ messages in thread
From: Kiswono Prayogo @ 2010-03-19 07:14 UTC (permalink / raw)
To: pgsql-admin
for complete build log:
http://pastebin.com/UfVFixQY
and there are no errors T^T
i didn't understand where is the possible cause of the problem..
any help, welcome ^^ thank you in advance..
On Fri, Mar 19, 2010 at 1:48 PM, Kiswono Prayogo <kiswono@gmail.com> wrote:
> oh yeah i forgot to show you that it's linked successfully:
>
> # sudo ldd /home/`whoami`/Software/PostgreSQL-9/bin/* | grep ssl
> libssl.so.0.9.8 => /lib/i686/cmov/libssl.so.0.9.8 (0x00cc4000)
> libssl.so.0.9.8 => /lib/i686/cmov/libssl.so.0.9.8 (0x00214000)
> libssl.so.0.9.8 => /lib/i686/cmov/libssl.so.0.9.8 (0x00e9b000)
> libssl.so.0.9.8 => /lib/i686/cmov/libssl.so.0.9.8 (0x00110000)
> libssl.so.0.9.8 => /lib/i686/cmov/libssl.so.0.9.8 (0x00110000)
> libssl.so.0.9.8 => /lib/i686/cmov/libssl.so.0.9.8 (0x0044f000)
> libssl.so.0.9.8 => /lib/i686/cmov/libssl.so.0.9.8 (0x0061b000)
> libssl.so.0.9.8 => /lib/i686/cmov/libssl.so.0.9.8 (0x00110000)
> libssl.so.0.9.8 => /lib/i686/cmov/libssl.so.0.9.8 (0x004fb000)
> libssl.so.0.9.8 => /lib/i686/cmov/libssl.so.0.9.8 (0x00b1a000)
> libssl.so.0.9.8 => /lib/i686/cmov/libssl.so.0.9.8 (0x00284000)
> libssl.so.0.9.8 => /lib/i686/cmov/libssl.so.0.9.8 (0x00135000)
> libssl.so.0.9.8 => /lib/i686/cmov/libssl.so.0.9.8 (0x004b6000)
> libssl.so.0.9.8 => /lib/i686/cmov/libssl.so.0.9.8 (0x00603000)
>
--
Regards,
Kiswono P
GB
^ permalink raw reply [nested|flat] 10+ messages in thread
* Re: Postgesql and SSL
2010-03-19 06:33 Re: Postgesql and SSL Kiswono Prayogo <kiswono@gmail.com>
2010-03-19 06:48 ` Re: Postgesql and SSL Kiswono Prayogo <kiswono@gmail.com>
2010-03-19 07:14 ` Re: Postgesql and SSL Kiswono Prayogo <kiswono@gmail.com>
@ 2010-03-19 11:49 ` Kiswono Prayogo <kiswono@gmail.com>
0 siblings, 0 replies; 10+ messages in thread
From: Kiswono Prayogo @ 2010-03-19 11:49 UTC (permalink / raw)
To: pgsql-admin
ok, please ignore this thread ^^ now i know that i shouldn't using
code from cvs anyway..
On Fri, Mar 19, 2010 at 2:14 PM, Kiswono Prayogo <kiswono@gmail.com> wrote:
> for complete build log:
> http://pastebin.com/UfVFixQY
>
> and there are no errors T^T
> i didn't understand where is the possible cause of the problem..
> any help, welcome ^^ thank you in advance..
>
--
Regards,
Kiswono P
GB
^ permalink raw reply [nested|flat] 10+ messages in thread
end of thread, other threads:[~2010-03-19 11:49 UTC | newest]
Thread overview: 10+ messages (download: mbox mbox.gz follow: Atom feed)
-- links below jump to the message on this page --
2009-02-28 22:18 Postgesql and SSL Lukas <Lukas@fmf.vtu.lt>
2009-02-28 22:53 ` Glyn Astill <glynastill@yahoo.co.uk>
2009-03-01 08:37 ` Lukas <Lukas@fmf.vtu.lt>
2009-03-01 12:49 ` Thomas Pundt <mlists@rp-online.de>
2009-03-01 16:54 ` Tom Lane <tgl@sss.pgh.pa.us>
2009-03-01 12:49 ` Glyn Astill <glynastill@yahoo.co.uk>
2010-03-19 06:33 Re: Postgesql and SSL Kiswono Prayogo <kiswono@gmail.com>
2010-03-19 06:48 ` Kiswono Prayogo <kiswono@gmail.com>
2010-03-19 07:14 ` Kiswono Prayogo <kiswono@gmail.com>
2010-03-19 11:49 ` Kiswono Prayogo <kiswono@gmail.com>
This inbox is served by DDX for PostgreSQL; see mirroring instructions
for how to clone and mirror all data and code used for this inbox