pg.ddx.io pgsql-admin@postgresql.org mailing list archive
help / color / mirror / Atom feedFQDN for replication connection in pg_hba.conf
4+ messages / 4 participants
[nested] [flat]
* FQDN for replication connection in pg_hba.conf
@ 2017-10-10 22:08 rammohan ganapavarapu <rammohanganap@gmail.com>
2017-10-10 22:17 ` Re: FQDN for replication connection in pg_hba.conf Tom Lane <tgl@sss.pgh.pa.us>
2017-10-10 22:18 ` Re: FQDN for replication connection in pg_hba.conf David G. Johnston <david.g.johnston@gmail.com>
0 siblings, 2 replies; 4+ messages in thread
From: rammohan ganapavarapu @ 2017-10-10 22:08 UTC (permalink / raw)
To: pgsql-admin
Can we use fqdn in pg_hba.conf for replication connections?
# TYPE DATABASE USER ADDRESS METHOD
# "local" is for Unix domain socket connections only
local all all trust
# IPv4 local connections:
host all all 0.0.0.0/0 md5
host replication postgres *slave.example.com
<http://slave.example.com; * trust
I am getting below error in slave
2017-10-10 21:34:52 UTC [313]: [1-1] user= db= host= FATAL: could not
connect to the primary server: FATAL: no pg_hba.conf entry for replication
connection from host "10.10.10.10", user "postgres", SSL off where
"10.10.10.10" is my slave (*slave.example.com <http://slave.example.com;) *
ip.
Thanks,
Ram
^ permalink raw reply [nested|flat] 4+ messages in thread
* Re: FQDN for replication connection in pg_hba.conf
2017-10-10 22:08 FQDN for replication connection in pg_hba.conf rammohan ganapavarapu <rammohanganap@gmail.com>
@ 2017-10-10 22:17 ` Tom Lane <tgl@sss.pgh.pa.us>
1 sibling, 0 replies; 4+ messages in thread
From: Tom Lane @ 2017-10-10 22:17 UTC (permalink / raw)
To: rammohan ganapavarapu <rammohanganap@gmail.com>; +Cc: pgsql-admin
rammohan ganapavarapu <rammohanganap@gmail.com> writes:
> Can we use fqdn in pg_hba.conf for replication connections?
Yes, if you're using 9.3 or newer, but note what the manual says:
If a host name is specified (anything that is not an IP address range
or a special key word is treated as a host name), that name is
compared with the result of a reverse name resolution of the client's
IP address (e.g., reverse DNS lookup, if DNS is used). Host name
comparisons are case insensitive. If there is a match, then a forward
name resolution (e.g., forward DNS lookup) is performed on the host
name to check whether any of the addresses it resolves to are equal to
the client's IP address. If both directions match, then the entry is
considered to match. (The host name that is used in pg_hba.conf should
be the one that address-to-name resolution of the client's IP address
returns, otherwise the line won't be matched. Some host name databases
allow associating an IP address with multiple host names, but the
operating system will only return one host name when asked to resolve
an IP address.)
My bet is you don't have reverse DNS set up correctly for that address.
regards, tom lane
--
Sent via pgsql-admin mailing list (pgsql-admin@postgresql.org)
To make changes to your subscription:
http://www.postgresql.org/mailpref/pgsql-admin
^ permalink raw reply [nested|flat] 4+ messages in thread
* Re: FQDN for replication connection in pg_hba.conf
2017-10-10 22:08 FQDN for replication connection in pg_hba.conf rammohan ganapavarapu <rammohanganap@gmail.com>
@ 2017-10-10 22:18 ` David G. Johnston <david.g.johnston@gmail.com>
2017-11-13 10:58 ` Re: FQDN for replication connection in pg_hba.conf Shreeyansh Dba <shreeyansh2014@gmail.com>
1 sibling, 1 reply; 4+ messages in thread
From: David G. Johnston @ 2017-10-10 22:18 UTC (permalink / raw)
To: rammohan ganapavarapu <rammohanganap@gmail.com>; +Cc: pgsql-admin
On Tue, Oct 10, 2017 at 3:08 PM, rammohan ganapavarapu <
rammohanganap@gmail.com> wrote:
> Can we use fqdn in pg_hba.conf for replication connections?
>
>
> # TYPE DATABASE USER ADDRESS METHOD
>
> # "local" is for Unix domain socket connections only
> local all all trust
> # IPv4 local connections:
> host all all 0.0.0.0/0 md5
> host replication postgres *slave.example.com
> <http://slave.example.com; * trust
>
>
> I am getting below error in slave
>
> 2017-10-10 21:34:52 UTC [313]: [1-1] user= db= host= FATAL: could not
> connect to the primary server: FATAL: no pg_hba.conf entry for replication
> connection from host "10.10.10.10", user "postgres", SSL off where
> "10.10.10.10" is my slave (*slave.example.com
> <http://slave.example.com;) * ip.
>
>
The comments and note under "address" at the following link suggest that
what you are trying is possible. Hopefully they can shed some light as to
what to check in order to find out why it is not working in your case. In
particular, are both DNS entries configured?
https://www.postgresql.org/docs/10/static/auth-pg-hba-conf.html
Ensure you reload the configuration after making changes.
I don't recall whether having a all/all/any entry above your replication
entry is going to be problematic - but that wouldn't explain a "no
pg_hba.conf entry" error.
David J.
^ permalink raw reply [nested|flat] 4+ messages in thread
* Re: FQDN for replication connection in pg_hba.conf
2017-10-10 22:08 FQDN for replication connection in pg_hba.conf rammohan ganapavarapu <rammohanganap@gmail.com>
2017-10-10 22:18 ` Re: FQDN for replication connection in pg_hba.conf David G. Johnston <david.g.johnston@gmail.com>
@ 2017-11-13 10:58 ` Shreeyansh Dba <shreeyansh2014@gmail.com>
0 siblings, 0 replies; 4+ messages in thread
From: Shreeyansh Dba @ 2017-11-13 10:58 UTC (permalink / raw)
To: David G. Johnston <david.g.johnston@gmail.com>; +Cc: rammohan ganapavarapu <rammohanganap@gmail.com>; pgsql-admin
On Wed, Oct 11, 2017 at 3:48 AM, David G. Johnston <
david.g.johnston@gmail.com> wrote:
> On Tue, Oct 10, 2017 at 3:08 PM, rammohan ganapavarapu <
> rammohanganap@gmail.com> wrote:
>
>> Can we use fqdn in pg_hba.conf for replication connections?
>>
>>
>> # TYPE DATABASE USER ADDRESS METHOD
>>
>> # "local" is for Unix domain socket connections only
>> local all all trust
>> # IPv4 local connections:
>> host all all 0.0.0.0/0 md5
>> host replication postgres *slave.example.com
>> <http://slave.example.com; * trust
>>
>>
>> I am getting below error in slave
>>
>> 2017-10-10 21:34:52 UTC [313]: [1-1] user= db= host= FATAL: could not
>> connect to the primary server: FATAL: no pg_hba.conf entry for replication
>> connection from host "10.10.10.10", user "postgres", SSL off where
>> "10.10.10.10" is my slave (*slave.example.com
>> <http://slave.example.com;) * ip.
>>
>>
> The comments and note under "address" at the following link suggest that
> what you are trying is possible. Hopefully they can shed some light as to
> what to check in order to find out why it is not working in your case. In
> particular, are both DNS entries configured?
>
> https://www.postgresql.org/docs/10/static/auth-pg-hba-conf.html
>
> Ensure you reload the configuration after making changes.
>
> I don't recall whether having a all/all/any entry above your replication
> entry is going to be problematic - but that wouldn't explain a "no
> pg_hba.conf entry" error.
>
> David J.
>
>
>
We can use fqdn in pg_hba.conf for replication connections
The only thing you need to do is mention the hostname both in pg_hba.conf
of postgresql and under /etc/hosts, that too both in master and slave
i) /etc/hosts (Entry required for both master & slave)
master IP address <name of the FQDN> <master hostname>
slave IP Address <name of the FQDN> <salve hostname>
ii) pg_hba.conf
# "local" is for Unix domain socket connections only
host all all <name of the FQDN of master>
trust
host all all <name of the FQDN of slave> trust
# Allow replication connections from localhost, by a user with the
# replication privilege.
host replication postgres <name of the FQDN of master>
trust
host replication postgres <name of the FQDN of slave> trust
Note :- firewall must be disable on (master side)
--
[image: http://www.shreeyansh.com] <http://www.shreeyansh.com;
^ permalink raw reply [nested|flat] 4+ messages in thread
end of thread, other threads:[~2017-11-13 10:58 UTC | newest]
Thread overview: 4+ messages (download: mbox mbox.gz follow: Atom feed)
-- links below jump to the message on this page --
2017-10-10 22:08 FQDN for replication connection in pg_hba.conf rammohan ganapavarapu <rammohanganap@gmail.com>
2017-10-10 22:17 ` Tom Lane <tgl@sss.pgh.pa.us>
2017-10-10 22:18 ` David G. Johnston <david.g.johnston@gmail.com>
2017-11-13 10:58 ` Shreeyansh Dba <shreeyansh2014@gmail.com>
This inbox is served by DDX for PostgreSQL; see mirroring instructions
for how to clone and mirror all data and code used for this inbox