pg.ddx.io  pgsql-admin@postgresql.org mailing list archive  
help / color / mirror / Atom feed
Windows Installer Bug (Probably)
3+ messages / 2 participants
[nested] [flat]

* Windows Installer Bug (Probably)
@ 2005-12-16 16:15  Ilias Goudaropoulos <ig@freemail.gr>
  0 siblings, 1 reply; 3+ messages in thread

From: Ilias Goudaropoulos @ 2005-12-16 16:15 UTC (permalink / raw)
  To: Admin PostgreSQL <" pgsql-admin"@postgresql.org>

I am writing to you all just to inform you of a bug(probably), that I 
came across while trying to install PostgreSQL 8.1.0-2 and 8.1.1-1 on 
WinXP with SP2, using the PostgreSQL installer.

I had done a windows clean install and then installed straight away 
PostgreSQL 8.0.4.  It was the only software installed on windows and 
worked perfectly.  After a day or two, I noticed that the PostgreSQL 
8.1.0-2 was released. I decided two uninstall PostgreSQL 8.0.4 and 
install the new 8.1.0-2 version.

So I did, using the following unistall procedure:

1.  I unistalled PostgreSQL 8.0.4 form the control panel in the usual 
manner that all windows application are uninstalled.
2.  I used the Computer Management program of the Administrative Tools 
of windows and deleted the PostgreSQL user that had been created during 
the installation of PostgreSQL 8.0.4.
3.  Finally, I removed all garbage left by the uninstaller in the registry.
4.  I restarted windows.

I have to stress that I did not have any other software installed on 
windows at the moment and I had the Windows firewall service disabled.

So I tried to install the new version 8.1.0-2 but got an error.  I tried 
at least 15 times and I always got the same error.  The error was 
manifesting itself during the installation as follows:

************************************************************
During the "Activating procedural languages" installation
part, I get:

"Failed to connect to the database.  Procedural
languages files are installed, but are not activated in
any databases."

When I press OK it continues and I get:

"server closed the connection unexpectedly
This probably means the server terminated
abnormally before or while processing the request."

When I press OK again, it continues and I get:

"Failed to connect to the 'template1' database.  Contrib
files are installed, but are not activated in any databases."

Pressing OK for a final time gives me this:

"could not send startup packet: Connection reset by
peer (0x00002746/10054)"
**************************************************************

I uninstalled the 8.1.0-2 PostgreSQL which was not working and I tried 
to install again the 8.0.4, as someone in the novice mailing list 
suggested.  The 8.0.4 installer worked fine and I had PostgreSQL 8.0.4 
up and running in no time.

Then I uninstalled 8.0.4 and tried to install 8.1.0-2 for a last time. 
The same errors appeared once again.

*************************************************************
If that is not a bizzare behaviour of the installer, what is?
*************************************************************

The same problem appeared when some people I know tried to install 
PostgreSQL 8.1.0-2 as well. But they did not have the time nor the 
inclination to make this known to the public by posting to the mailing 
lists.  I have no feedback of the same people trying the 8.1.1-1 
version.  I believe they have not tried it yet.

Now that PostgreSQL 8.1.1-1 is out, I decided to test my luck again.
I repeated the whole procedure and I got exactly the same erros that
manifested when trying to install 8.1.0-2.  I uninstalled and I tried
to install 8.0.4.  That went ok again and I did not have any problems.
All the problems appear whenever I try to install any version after the
8.0.4.

As someone suggested, these errors indicate a proper install where the 
server crashes after install.  That is exactly what happens.

Another strange thing is that when the first error prompt appears, if I 
look for any log files, I can not find any.  Maybe that is because that 
error appears after the installation of the core engine.  I domt know.

But! That bizzare behaviour does not manifest itself when using the 
installers of versions of PostgreSQL prior to 8.1.x.

For all versions of PostgreSQL that I have successfully installed so far 
(8.0.4 and all others prior to that), I used the folder "C:\Program 
Files\Postgresql\" for the PostgrerSQL files and the folder "D:\DBASES\" 
for the database files.  I tried the default folders as well but it did 
not make any difference.  At any unistallation I delete the folder 
D:\DBASES manually.  All other folders are deleted automatically by the 
unistaller.

Can anybody please help?
It is very annoying not to be able to use the DB.

____________________________________________________________________
http://www.freemail.gr - äùñåÜí õðçñåóßá çëåêôñïíéêïý ôá÷õäñïìåßïõ.
http://www.freemail.gr - free email service for the Greek-speaking.



^ permalink  raw  reply  [nested|flat] 3+ messages in thread

* Re: Windows Installer Bug (Probably)
@ 2005-12-16 22:39  Sabbiolina <sabbiolina@gmail.com>
  parent: Ilias Goudaropoulos <ig@freemail.gr>
  0 siblings, 0 replies; 3+ messages in thread

From: Sabbiolina @ 2005-12-16 22:39 UTC (permalink / raw)
  To: pgsql-admin

You must add ...\PostgreSQL\8.1\bin\ to PATH manually and restart

;)


On 12/16/05, Ilias Goudaropoulos <ig@freemail.gr> wrote:
>
> I am writing to you all just to inform you of a bug(probably), that I
> came across while trying to install PostgreSQL 8.1.0-2 and 8.1.1-1 on
> WinXP with SP2, using the PostgreSQL installer.
>
> I had done a windows clean install and then installed straight away
> PostgreSQL 8.0.4.  It was the only software installed on windows and
> worked perfectly.  After a day or two, I noticed that the PostgreSQL
> 8.1.0-2 was released. I decided two uninstall PostgreSQL 8.0.4 and
> install the new 8.1.0-2 version.
>
> So I did, using the following unistall procedure:
>
> 1.  I unistalled PostgreSQL 8.0.4 form the control panel in the usual
> manner that all windows application are uninstalled.
> 2.  I used the Computer Management program of the Administrative Tools
> of windows and deleted the PostgreSQL user that had been created during
> the installation of PostgreSQL 8.0.4.
> 3.  Finally, I removed all garbage left by the uninstaller in the
> registry.
> 4.  I restarted windows.
>
> I have to stress that I did not have any other software installed on
> windows at the moment and I had the Windows firewall service disabled.
>
> So I tried to install the new version 8.1.0-2 but got an error.  I tried
> at least 15 times and I always got the same error.  The error was
> manifesting itself during the installation as follows:
>
> ************************************************************
> During the "Activating procedural languages" installation
> part, I get:
>
> "Failed to connect to the database.  Procedural
> languages files are installed, but are not activated in
> any databases."
>
> When I press OK it continues and I get:
>
> "server closed the connection unexpectedly
> This probably means the server terminated
> abnormally before or while processing the request."
>
> When I press OK again, it continues and I get:
>
> "Failed to connect to the 'template1' database.  Contrib
> files are installed, but are not activated in any databases."
>
> Pressing OK for a final time gives me this:
>
> "could not send startup packet: Connection reset by
> peer (0x00002746/10054)"
> **************************************************************
>
> I uninstalled the 8.1.0-2 PostgreSQL which was not working and I tried
> to install again the 8.0.4, as someone in the novice mailing list
> suggested.  The 8.0.4 installer worked fine and I had PostgreSQL 8.0.4
> up and running in no time.
>
> Then I uninstalled 8.0.4 and tried to install 8.1.0-2 for a last time.
> The same errors appeared once again.
>
> *************************************************************
> If that is not a bizzare behaviour of the installer, what is?
> *************************************************************
>
> The same problem appeared when some people I know tried to install
> PostgreSQL 8.1.0-2 as well. But they did not have the time nor the
> inclination to make this known to the public by posting to the mailing
> lists.  I have no feedback of the same people trying the 8.1.1-1
> version.  I believe they have not tried it yet.
>
> Now that PostgreSQL 8.1.1-1 is out, I decided to test my luck again.
> I repeated the whole procedure and I got exactly the same erros that
> manifested when trying to install 8.1.0-2.  I uninstalled and I tried
> to install 8.0.4.  That went ok again and I did not have any problems.
> All the problems appear whenever I try to install any version after the
> 8.0.4.
>
> As someone suggested, these errors indicate a proper install where the
> server crashes after install.  That is exactly what happens.
>
> Another strange thing is that when the first error prompt appears, if I
> look for any log files, I can not find any.  Maybe that is because that
> error appears after the installation of the core engine.  I domt know.
>
> But! That bizzare behaviour does not manifest itself when using the
> installers of versions of PostgreSQL prior to 8.1.x.
>
> For all versions of PostgreSQL that I have successfully installed so far
> (8.0.4 and all others prior to that), I used the folder "C:\Program
> Files\Postgresql\" for the PostgrerSQL files and the folder "D:\DBASES\"
> for the database files.  I tried the default folders as well but it did
> not make any difference.  At any unistallation I delete the folder
> D:\DBASES manually.  All other folders are deleted automatically by the
> unistaller.
>
> Can anybody please help?
> It is very annoying not to be able to use the DB.
>
> ____________________________________________________________________
> http://www.freemail.gr - äùñåÜí õðçñåóßá çëåêôñïíéêïý ôá÷õäñïìåßïõ.
> http://www.freemail.gr - free email service for the Greek-speaking.
>
> ---------------------------(end of broadcast)---------------------------
> TIP 2: Don't 'kill -9' the postmaster
>


^ permalink  raw  reply  [nested|flat] 3+ messages in thread

* Re: Windows Installer Bug (Probably)
@ 2005-12-17 23:15  Ilias Goudaropoulos <ig@freemail.gr>
  0 siblings, 0 replies; 3+ messages in thread

From: Ilias Goudaropoulos @ 2005-12-17 23:15 UTC (permalink / raw)
  To: Admin PostgreSQL <" pgsql-admin"@postgresql.org>

Sabbiolina I did what you suggested but it did not work.
I wish it was that simple to correct.

Any other ideas people?

____________________________________________________________________
http://www.freemail.gr - äùñåÜí õðçñåóßá çëåêôñïíéêïý ôá÷õäñïìåßïõ.
http://www.freemail.gr - free email service for the Greek-speaking.



^ permalink  raw  reply  [nested|flat] 3+ messages in thread


end of thread, other threads:[~2005-12-17 23:15 UTC | newest]

Thread overview: 3+ messages (download: mbox mbox.gz follow: Atom feed)
-- links below jump to the message on this page --
2005-12-16 16:15 Windows Installer Bug (Probably) Ilias Goudaropoulos <ig@freemail.gr>
2005-12-16 22:39 ` Sabbiolina <sabbiolina@gmail.com>
2005-12-17 23:15 Re: Windows Installer Bug (Probably) Ilias Goudaropoulos <ig@freemail.gr>

This inbox is served by DDX for PostgreSQL; see mirroring instructions
for how to clone and mirror all data and code used for this inbox