pg.ddx.io pgsql-admin@postgresql.org mailing list archivehelp / color / mirror / Atom feed
multiple postgres instances from RPM install 5+ messages / 2 participants [nested] [flat]
* multiple postgres instances from RPM install @ 2006-12-19 17:40 Tom Kalafut <tommyk@tridsys.com> 2006-12-19 18:25 ` Re: multiple postgres instances from RPM install Rajesh Kumar Mallah <mallah.rajesh@gmail.com> 0 siblings, 1 reply; 5+ messages in thread From: Tom Kalafut @ 2006-12-19 17:40 UTC (permalink / raw) To: pgsql-admin I am getting ready to set up 2 postgres instances, but I'm somewhat new to postgres. I've used RPM to list out all the files that are installed, and I think I've isolated all the executables of which I need to make separate copies, but I was hoping for some confirmation. I heard the exact files that need copying are listed in a thread somewhere in the archives, but I can't seem to find it. Could someone please point me to it? The motivation behind this is having 2 distinct SELinux policies for 2 separate users with their own separate databases. Thanks, Tom Tom Kalafut Interchange/CG Crew Member Trident Systems Inc. tommyk@tridsys.com (919)388-1264 ------------------------- The opinions expressed in this email may not necessarily reflect the opinions of Trident Systems Inc. ^ permalink raw reply [nested|flat] 5+ messages in thread
* Re: multiple postgres instances from RPM install 2006-12-19 17:40 multiple postgres instances from RPM install Tom Kalafut <tommyk@tridsys.com> @ 2006-12-19 18:25 ` Rajesh Kumar Mallah <mallah.rajesh@gmail.com> 0 siblings, 0 replies; 5+ messages in thread From: Rajesh Kumar Mallah @ 2006-12-19 18:25 UTC (permalink / raw) To: Tom Kalafut <tommyk@tridsys.com>; +Cc: pgsql-admin On 12/19/06, Tom Kalafut <tommyk@tridsys.com> wrote: > > > > > I am getting ready to set up 2 postgres instances, but I'm somewhat new to > postgres. I've used RPM to list out all the files that are installed, and I > think I've isolated all the executables of which I need to make separate > copies, but I was hoping for some confirmation. please read about initdb you can initdb two different empty directories as two different unix users. when you initdb a directory you will get a postgresql.conf file in it. you can change the port number in that file to run different instances separately. but do you really need two different instances that would possibly compete each other for resources? I heard the exact files > that need copying are listed in a thread somewhere in the archives, but I > can't seem to find it. Could someone please point me to it? > > > > The motivation behind this is having 2 distinct SELinux policies for 2 > separate users with their own separate databases. > > > > Thanks, > > Tom > > > > > > Tom Kalafut > Interchange/CG Crew Member > Trident Systems Inc. > tommyk@tridsys.com > (919)388-1264 > > > > ------------------------- > > The opinions expressed in this email may not necessarily reflect the > opinions of Trident Systems Inc. > > ^ permalink raw reply [nested|flat] 5+ messages in thread
* Re: multiple postgres instances from RPM install @ 2006-12-19 18:43 Tom Kalafut <tommyk@tridsys.com> 2006-12-19 18:49 ` Re: multiple postgres instances from RPM install Rajesh Kumar Mallah <mallah.rajesh@gmail.com> 0 siblings, 1 reply; 5+ messages in thread From: Tom Kalafut @ 2006-12-19 18:43 UTC (permalink / raw) To: Rajesh Kumar Mallah <mallah.rajesh@gmail.com>; +Cc: pgsql-admin After consulting with a teammate, I've found out that they'd have no problem simply doing 2 separate makes. In fact, I'm glad. It's makes much better sense. Thanks, Tom Tom Kalafut Interchange/CG Crew Member Trident Systems Inc. tommyk@tridsys.com (919)388-1264 ------------------------- The opinions expressed in this email may not necessarily reflect the opinions of Trident Systems Inc. -----Original Message----- From: Rajesh Kumar Mallah [mailto:mallah.rajesh@gmail.com] Sent: Tuesday, December 19, 2006 1:26 PM To: Tom Kalafut Cc: pgsql-admin@postgresql.org Subject: Re: [ADMIN] multiple postgres instances from RPM install On 12/19/06, Tom Kalafut <tommyk@tridsys.com> wrote: > > > > > I am getting ready to set up 2 postgres instances, but I'm somewhat new to > postgres. I've used RPM to list out all the files that are installed, and I > think I've isolated all the executables of which I need to make separate > copies, but I was hoping for some confirmation. please read about initdb you can initdb two different empty directories as two different unix users. when you initdb a directory you will get a postgresql.conf file in it. you can change the port number in that file to run different instances separately. but do you really need two different instances that would possibly compete each other for resources? I heard the exact files > that need copying are listed in a thread somewhere in the archives, but I > can't seem to find it. Could someone please point me to it? > > > > The motivation behind this is having 2 distinct SELinux policies for 2 > separate users with their own separate databases. > > > > Thanks, > > Tom > > > > > > Tom Kalafut > Interchange/CG Crew Member > Trident Systems Inc. > tommyk@tridsys.com > (919)388-1264 > > > > ------------------------- > > The opinions expressed in this email may not necessarily reflect the > opinions of Trident Systems Inc. > > ^ permalink raw reply [nested|flat] 5+ messages in thread
* Re: multiple postgres instances from RPM install 2006-12-19 18:43 Re: multiple postgres instances from RPM install Tom Kalafut <tommyk@tridsys.com> @ 2006-12-19 18:49 ` Rajesh Kumar Mallah <mallah.rajesh@gmail.com> 0 siblings, 0 replies; 5+ messages in thread From: Rajesh Kumar Mallah @ 2006-12-19 18:49 UTC (permalink / raw) To: Tom Kalafut <tommyk@tridsys.com>; +Cc: pgsql-admin On 12/20/06, Tom Kalafut <tommyk@tridsys.com> wrote: > After consulting with a teammate, I've found out that they'd have no > problem simply doing 2 separate makes. > In fact, I'm glad. It's makes > much better sense. i really dont much understand what you have decided to do. have you considered creating two separate databases in same postgresql installation ? > > Thanks, > Tom > > Tom Kalafut > Interchange/CG Crew Member > Trident Systems Inc. > tommyk@tridsys.com > (919)388-1264 > > ------------------------- > The opinions expressed in this email may not necessarily reflect the > opinions of Trident Systems Inc. > > -----Original Message----- > From: Rajesh Kumar Mallah [mailto:mallah.rajesh@gmail.com] > Sent: Tuesday, December 19, 2006 1:26 PM > To: Tom Kalafut > Cc: pgsql-admin@postgresql.org > Subject: Re: [ADMIN] multiple postgres instances from RPM install > > On 12/19/06, Tom Kalafut <tommyk@tridsys.com> wrote: > > > > > > > > > > I am getting ready to set up 2 postgres instances, but I'm somewhat > new to > > postgres. I've used RPM to list out all the files that are installed, > and I > > think I've isolated all the executables of which I need to make > separate > > copies, but I was hoping for some confirmation. > > please read about initdb > > you can initdb two different empty directories as two different unix > users. > when you initdb a directory you will get a postgresql.conf file in it. > you can change the port number in that file to run different instances > separately. > > but do you really need two different instances that would possibly > compete > each other for resources? > > I heard the exact files > > that need copying are listed in a thread somewhere in the archives, > but I > > can't seem to find it. Could someone please point me to it? > > > > > > > > The motivation behind this is having 2 distinct SELinux policies for 2 > > separate users with their own separate databases. > > > > > > > > Thanks, > > > > Tom > > > > > > > > > > > > Tom Kalafut > > Interchange/CG Crew Member > > Trident Systems Inc. > > tommyk@tridsys.com > > (919)388-1264 > > > > > > > > ------------------------- > > > > The opinions expressed in this email may not necessarily reflect the > > opinions of Trident Systems Inc. > > > > > ^ permalink raw reply [nested|flat] 5+ messages in thread
* Re: multiple postgres instances from RPM install @ 2006-12-19 19:48 Tom Kalafut <tommyk@tridsys.com> 0 siblings, 0 replies; 5+ messages in thread From: Tom Kalafut @ 2006-12-19 19:48 UTC (permalink / raw) To: Rajesh Kumar Mallah <mallah.rajesh@gmail.com>; +Cc: pgsql-admin That is not an option. We're currently doing that. The customer wants separate installations of postgres, mostly for security reasons. Admin is divvied up between 4-5 "admin" user accounts on the system because there are several user roles in our product's community. Separate installations allow one "admin" user to control everything involved with the database (including the postmaster executables) for one application and another "admin" user to control everything involved with a the database for a different application. Tom Tom Kalafut Interchange/CG Crew Member Trident Systems Inc. tommyk@tridsys.com (919)388-1264 ------------------------- The opinions expressed in this email may not necessarily reflect the opinions of Trident Systems Inc. -----Original Message----- From: Rajesh Kumar Mallah [mailto:mallah.rajesh@gmail.com] Sent: Tuesday, December 19, 2006 1:50 PM To: Tom Kalafut Cc: pgsql-admin@postgresql.org Subject: Re: [ADMIN] multiple postgres instances from RPM install On 12/20/06, Tom Kalafut <tommyk@tridsys.com> wrote: > After consulting with a teammate, I've found out that they'd have no > problem simply doing 2 separate makes. > In fact, I'm glad. It's makes > much better sense. i really dont much understand what you have decided to do. have you considered creating two separate databases in same postgresql installation ? > > Thanks, > Tom > > Tom Kalafut > Interchange/CG Crew Member > Trident Systems Inc. > tommyk@tridsys.com > (919)388-1264 > > ------------------------- > The opinions expressed in this email may not necessarily reflect the > opinions of Trident Systems Inc. > > -----Original Message----- > From: Rajesh Kumar Mallah [mailto:mallah.rajesh@gmail.com] > Sent: Tuesday, December 19, 2006 1:26 PM > To: Tom Kalafut > Cc: pgsql-admin@postgresql.org > Subject: Re: [ADMIN] multiple postgres instances from RPM install > > On 12/19/06, Tom Kalafut <tommyk@tridsys.com> wrote: > > > > > > > > > > I am getting ready to set up 2 postgres instances, but I'm somewhat > new to > > postgres. I've used RPM to list out all the files that are installed, > and I > > think I've isolated all the executables of which I need to make > separate > > copies, but I was hoping for some confirmation. > > please read about initdb > > you can initdb two different empty directories as two different unix > users. > when you initdb a directory you will get a postgresql.conf file in it. > you can change the port number in that file to run different instances > separately. > > but do you really need two different instances that would possibly > compete > each other for resources? > > I heard the exact files > > that need copying are listed in a thread somewhere in the archives, > but I > > can't seem to find it. Could someone please point me to it? > > > > > > > > The motivation behind this is having 2 distinct SELinux policies for 2 > > separate users with their own separate databases. > > > > > > > > Thanks, > > > > Tom > > > > > > > > > > > > Tom Kalafut > > Interchange/CG Crew Member > > Trident Systems Inc. > > tommyk@tridsys.com > > (919)388-1264 > > > > > > > > ------------------------- > > > > The opinions expressed in this email may not necessarily reflect the > > opinions of Trident Systems Inc. > > > > > ^ permalink raw reply [nested|flat] 5+ messages in thread
end of thread, other threads:[~2006-12-19 19:48 UTC | newest] Thread overview: 5+ messages (download: mbox mbox.gz follow: Atom feed) -- links below jump to the message on this page -- 2006-12-19 17:40 multiple postgres instances from RPM install Tom Kalafut <tommyk@tridsys.com> 2006-12-19 18:25 ` Rajesh Kumar Mallah <mallah.rajesh@gmail.com> 2006-12-19 18:43 Re: multiple postgres instances from RPM install Tom Kalafut <tommyk@tridsys.com> 2006-12-19 18:49 ` Rajesh Kumar Mallah <mallah.rajesh@gmail.com> 2006-12-19 19:48 Re: multiple postgres instances from RPM install Tom Kalafut <tommyk@tridsys.com>
This inbox is served by DDX for PostgreSQL; see mirroring instructions for how to clone and mirror all data and code used for this inbox