pg.ddx.io pgsql-docs@postgresql.org mailing list archive
help / color / mirror / Atom feedhow can I get Error-message from postgresql in linux shell script
2+ messages / 1 participants
[nested] [flat]
* how can I get Error-message from postgresql in linux shell script
@ 2003-03-28 12:18 ` rx <rong.xie@stud.tu-muenchen.de>
1 sibling, 0 replies; 2+ messages in thread
From: rx @ 2003-03-28 12:18 UTC (permalink / raw)
To: Dave Page <dpage@vale-housing.co.uk>; pgsql-docs; +Cc: pgadmin-support@postgresql.org; pgadmin-hackers <pgadmin-hackers@postgresql.org>
Messagehallo,
my Name is Rong. I am student at TU-Munich. I have some questions for
Postgresql under SuSe Linux.
I want save something in Postgresql-Table, when I get a fax from "Hylafax".
I insert "
psql -U postgres dbname <<END_OF_INSTR
insert into "CSID_TIF"("CSID","suspens_file","actDatum")
values('0049891234567','test.tif','01.01.2003'))
END_OF_INSTR "
in shell script.
It work very good.
Now I want enhance it.
When there are some error in Postgresql, or There are some Error at insert,
I want give a message per email to me.
But I do not know, how can I get the Error from Postgresql in Linux Shell
Script.
When an Postgresql-Error is to happen, how can I get the Error-Message-Event
in shell script and send a email to me.
I hope I can get your Help!
Thank you very much!
best regards!
rong
PS: faxrcvd is my shell-script in Hylafax.
#! /bin/sh
psql -U postgres dbname <<END_OF_INSTR
insert into "CSID_TIF"("CSID","suspens_file","actDatum")
values('0049891234567','test.tif','01.01.2003'))
END_OF_INSTR
##end script
----- Original Message -----
From: <pgsql-general-owner@postgresql.org>
To: "rx" <rong.xie@stud.tu-muenchen.de>
Sent: Thursday, March 27, 2003 4:03 PM
Subject: Stalled post to pgsql-general
> Your message to pgsql-general has been delayed, and requires the approval
> of the moderators, for the following reason(s):
>
> Non-Member Submission from "rx" <rong.xie@stud.tu-muenchen.de>
>
> If you do not wish the message to be posted, or have other concerns,
> please send a message to the list owners at the following address:
> pgsql-general-owner@postgresql.org
>
Attachments:
faxrcvd (application/octet-stream, 7.1K) download
^ permalink raw reply [nested|flat] 2+ messages in thread
* how can I get Error-message from postgresql in linux shell script
@ 2003-03-28 12:23 ` rx <rong.xie@stud.tu-muenchen.de>
1 sibling, 0 replies; 2+ messages in thread
From: rx @ 2003-03-28 12:23 UTC (permalink / raw)
To: Dave Page <dpage@vale-housing.co.uk>; XIE, Rong <rong.xie@stud.tu-muenchen.de>; pgsql-docs; +Cc: pgadmin-support@postgresql.org; pgadmin-hackers <pgadmin-hackers@postgresql.org>
Messagehallo,
my Name is Rong. I am student at TU-Munich. I have some questions for
Postgresql under SuSe Linux.
I want save something in Postgresql-Table, when I get a fax from "Hylafax".
I insert "
psql -U postgres dbname <<END_OF_INSTR
insert into "CSID_TIF"("CSID","suspens_file","actDatum")
values('0049891234567','test.tif','01.01.2003'))
END_OF_INSTR "
in shell script.
It work very good.
Now I want enhance it.
When there are some error in Postgresql, or There are some Error at insert,
I want give a message per email to me.
But I do not know, how can I get the Error from Postgresql in Linux Shell
Script.
When an Postgresql-Error is to happen, how can I get the Error-Message-Event
in shell script and send a email to me.
I hope I can get your Help!
Thank you very much!
best regards!
rong
PS: faxrcvd is my shell-script in Hylafax.
#! /bin/sh
psql -U postgres dbname <<END_OF_INSTR
insert into "CSID_TIF"("CSID","suspens_file","actDatum")
values('0049891234567','test.tif','01.01.2003'))
END_OF_INSTR
##end script
----- Original Message -----
From: <pgsql-general-owner@postgresql.org>
To: "rx" <rong.xie@stud.tu-muenchen.de>
Sent: Thursday, March 27, 2003 4:03 PM
Subject: Stalled post to pgsql-general
> Your message to pgsql-general has been delayed, and requires the approval
> of the moderators, for the following reason(s):
>
> Non-Member Submission from "rx" <rong.xie@stud.tu-muenchen.de>
>
> If you do not wish the message to be posted, or have other concerns,
> please send a message to the list owners at the following address:
> pgsql-general-owner@postgresql.org
>
Attachments:
faxrcvd.txt (text/plain, 7.1K) download
#! /bin/sh
echo "hallo"
# $Id: faxrcvd.sh.in,v 1.1 2001/04/15 03:48:16 darren Exp $
#
# HylaFAX Facsimile Software
#
# Copyright (c) 1990-1996 Sam Leffler
# Copyright (c) 1991-1996 Silicon Graphics, Inc.
# HylaFAX is a trademark of Silicon Graphics
#
# Permission to use, copy, modify, distribute, and sell this software and
# its documentation for any purpose is hereby granted without fee, provided
# that (i) the above copyright notices and this permission notice appear in
# all copies of the software and related documentation, and (ii) the names of
# Sam Leffler and Silicon Graphics may not be used in any advertising or
# publicity relating to the software without the specific, prior written
# permission of Sam Leffler and Silicon Graphics.
#
# THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND,
# EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY
# WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
#
# IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR
# ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND,
# OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
# WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF
# LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
# OF THIS SOFTWARE.
#
#
# faxrcvd file devID commID error-msg destination
#
#if [ $# != 5 ]; then
# echo "Usage: $0 file devID commID error-msg destination"
# exit 1
#fi
echo "test1"
test -f etc/setup.cache || {
SPOOL=`pwd`
cat<<EOF
FATAL ERROR: $SPOOL/etc/setup.cache is missing!
The file $SPOOL/etc/setup.cache is not present. This
probably means the machine has not been setup using the faxsetup(8C)
command. Read the documentation on setting up HylaFAX before you
startup a server system.
EOF
exit 1
}
echo $SPOOL
. etc/setup.cache
echo "etc/setup"
###INFO=/usr/sbin/faxinfo
INFO=$SBIN/faxinfo
echo $INFO
###FAX2PS=$TIFFBIN/fax2ps
TOADDR=FaxMaster
#
# There is no good portable way to find out the fully qualified
# domain name (FQDN) of the host or the TCP port for the hylafax
# service so we fudge here. Folks may want to tailor this to
# their needs; e.g. add a domain or use localhost so the loopback
# interface is used.
#
HOSTNAME="localhost" # XXX no good way to find FQDN
PORT=4559 # XXX no good way to lookup service
FILE="$1"
DEVICE="$2"
COMMID="$3"
MSG="$4"
echo $FILE
SENDER="`$INFO $FILE | $AWK -F: '/Sender/ { print $2 }' 2>/dev/null`"
#if [ -f $FILE ]; then
#
# Check the sender's TSI and setup to dispatch
# facsimile received from well-known senders.
#
SENDER="`$INFO $FILE | $AWK -F: '/Sender/ { print $2 }' 2>/dev/null`"
TXTFILE=`echo $FILE|sed -e 's/recvq//g; s/tif/txt/g'`
TXTFILE="/var/spool/fax/Eingang"$TXTFILE
FILENAME=`echo $FILE|sed -e 's/recvq//g'|sed -e 's/\///'`
$INFO $FILE > $TXTFILE
chmod 0777 $TXTFILE
echo $TXTFILE
#####andert von rong 25.02.2003
Received=`sed -n -e '/Received:/p' $TXTFILE |sed 's/[\t\n\r\f\v]*Received: //g'|sed 's/:/\//'|sed 's/:/\//'`
Sender=`sed -n -e '/Sender:/p' $TXTFILE |sed 's/[ \t\n\r\f\v]*Sender: //g'`
recvqsuspens=`sed -n -e '/recvq/p' $TXTFILE |cut -d/ -f2 |sed 's/://g'`
Received_file=`sed -n -e '/Received:/p' $TXTFILE|sed 's/[\t\n\r\f\v]*Received: //g'|sed 's/:/_/g'|sed 's/ /_/g'|sed 's/_//'|sed 's/_//'`
echo $Received_file
#TIFFILE=`echo $FILE|sed -e 's/recvq//g'`
#TIFFILE="/var/spool/fax/Eingang"$TIFFILE
#chmod 0777 $TIFFILE
#TIFFILE=`echo $FILE|sed -e 's/recvq//g'`
TIFFILE=$Received_file".tif"
cp $FILE /var/spool/fax/Eingang/$TIFFILE
#cp $FILE /var/spool/fax/Eingang/
chmod 0777 /var/spool/fax/Eingang/$TIFFILE
echo $FILENAME
echo $TIFFILE
echo $recvqsuspens
echo $Received
echo $Sender
psql -U postgres VEIrx <<END_OF_INSTR
insert into "Faxeingang" values(trim(both ' ' from '$Received'),'$TIFFILE','$Sender')
END_OF_INSTR
#####andert von rong 25.02.2003
# SENDTO=
# if [ -f bin/FaxDispatch ]; then
# . bin/FaxDispatch # NB: FaxDispatch sets SENDTO based on $5
# fi
# (echo "To: $TOADDR"
# echo "From: The HylaFAX Receive Agent <fax>"
# echo "Subject: facsimile received from $SENDER";
# echo ""
# echo "$FILE (ftp://$HOSTNAME:$PORT/$FILE):"; $INFO -n $FILE
# echo "ReceivedOn: $DEVICE"
# if [ "$MSG" ]; then
# echo ""
# echo "The full document was not received because:"
# echo ""
# echo " $MSG"
# echo ""
# echo " ---- Transcript of session follows ----"
# echo ""
# if [ -f log/c$COMMID ]; then
# $SED -e '/-- data/d' \
# -e '/start.*timer/d' -e '/stop.*timer/d' \
# log/c$COMMID
# elif [ -n "$COMMID" ]; then
# echo " No transcript available (CommID c$COMMID)."
# else
# echo " No transcript available."
# fi
# else
# echo "CommID: c$COMMID (ftp://$HOSTNAME:$PORT/log/c$COMMID)"
# fi
# if [ -n "$SENDTO" ]; then
# echo ""
# echo "The facsimile was automatically dispatched to: $SENDTO."
# fi
# ) | 2>&1 $SENDMAIL -ffax -oi $TOADDR
# if [ -n "$SENDTO" ]; then
# (MIMEBOUNDARY="NextPart$$"
# echo "Mime-Version: 1.0"
# echo "Content-Type: Multipart/Mixed; Boundary=\"$MIMEBOUNDARY\""
# echo "Content-Transfer-Encoding: 7bit"
# echo "To: $SENDTO"
# echo "From: The HylaFAX Receive Agent <fax>"
# echo "Subject: facsimile received from $SENDER";
# echo ""
# echo "--$MIMEBOUNDARY"
# echo "Content-Type: text/plain; charset=us-ascii"
# echo "Content-Transfer-Encoding: 7bit"
# echo ""
# echo "$FILE (ftp://$HOSTNAME:$PORT/$FILE):"; $INFO -n $FILE
# echo "ReceivedOn: $DEVICE"
# if [ "$MSG" ]; then
# echo ""
# echo "The full document was not received because:"
# echo ""
# echo " $MSG"
# echo ""
# echo " ---- Transcript of session follows ----"
# echo ""
# if [ -f log/c$COMMID ]; then
# $SED -e '/-- data/d' \
# -e '/start.*timer/d' -e '/stop.*timer/d' \
# log/c$COMMID
# elif [ -n "$COMMID" ]; then
# echo " No transcript available (CommID c$COMMID)."
# else
# echo " No transcript available."
# fi
# else
# echo "CommID: c$COMMID (ftp://$HOSTNAME:$PORT/log/c$COMMID)"
# fi
# echo ""
# echo "--$MIMEBOUNDARY"
# echo "Content-Type: application/postscript"
# echo "Content-Description: FAX document"
# echo "Content-Transfer-Encoding: 7bit"
# echo ""kwrite
# $FAX2PS $FILE 2>/dev/null
# echo ""
# echo "--$MIMEBOUNDARY--"
# ) | 2>&1 $SENDMAIL -ffax -oi $SENDTO
# fi
#else
#
# Generate notification mail for a failed attempt.
#
# echo "To:"
# (echo "To: $TOADDR"
# echo "From: The HylaFAX Receive Agent <fax>"
# echo "Subject: facsimile not received"
# echo ""
# echo "An attempt to receive facsimile on $DEVICE failed because:"
# echo ""
# echo " $MSG"
# echo ""
# echo " ---- Transcript of session follows ----"
# echo ""
# if [ -f log/c$COMMID ]; then
# $SED -e '/-- data/d' \
# -e '/start.*timer/d' -e '/stop.*timer/d' \
# log/c$COMMID
# elif [ -n "$COMMID" ]; then
# echo "No transcript available (CommID c$COMMID)."
# else
# echo "No transcript available."
# fi
# ) | 2>&1 $SENDMAIL -ffax -oi $TOADDR
#fi
##end script
end of thread, other threads:[~2003-03-28 12:23 UTC | newest]
Thread overview: 2+ messages (download: mbox mbox.gz follow: Atom feed)
-- links below jump to the message on this page --
2003-03-28 12:18 ` rx <rong.xie@stud.tu-muenchen.de>
2003-03-28 12:23 ` rx <rong.xie@stud.tu-muenchen.de>
This inbox is served by DDX for PostgreSQL; see mirroring instructions
for how to clone and mirror all data and code used for this inbox