public inbox for [email protected]help / color / mirror / Atom feed
[PATCH 07/10] add wal_compression_method: zstd 2+ messages / 2 participants [nested] [flat]
* [PATCH 07/10] add wal_compression_method: zstd @ 2021-03-12 20:43 Justin Pryzby <[email protected]> 0 siblings, 0 replies; 2+ messages in thread From: Justin Pryzby @ 2021-03-12 20:43 UTC (permalink / raw) --- configure | 163 ++++++++++++++++++ configure.ac | 26 +++ doc/src/sgml/config.sgml | 2 +- src/backend/access/transam/xlog.c | 3 + src/backend/access/transam/xloginsert.c | 19 ++ src/backend/access/transam/xlogreader.c | 16 ++ src/backend/utils/misc/postgresql.conf.sample | 2 +- src/include/access/xlog_internal.h | 1 + src/include/pg_config.h.in | 3 + src/tools/msvc/Solution.pm | 1 + 10 files changed, 234 insertions(+), 2 deletions(-) diff --git a/configure b/configure index 8d76be00c1..81e23418b2 100755 --- a/configure +++ b/configure @@ -699,6 +699,9 @@ with_gnu_ld LD LDFLAGS_SL LDFLAGS_EX +ZSTD_LIBS +ZSTD_CFLAGS +with_zstd LZ4_LIBS LZ4_CFLAGS with_lz4 @@ -868,6 +871,7 @@ with_libxslt with_system_tzdata with_zlib with_lz4 +with_zstd with_gnu_ld with_ssl with_openssl @@ -897,6 +901,8 @@ XML2_CFLAGS XML2_LIBS LZ4_CFLAGS LZ4_LIBS +ZSTD_CFLAGS +ZSTD_LIBS LDFLAGS_EX LDFLAGS_SL PERL @@ -1576,6 +1582,7 @@ Optional Packages: use system time zone data in DIR --without-zlib do not use Zlib --without-lz4 build without LZ4 support + --with-zstd build with Zstd compression library --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-ssl=LIB use LIB for SSL/TLS support (openssl) --with-openssl obsolete spelling of --with-ssl=openssl @@ -1605,6 +1612,8 @@ Some influential environment variables: XML2_LIBS linker flags for XML2, overriding pkg-config LZ4_CFLAGS C compiler flags for LZ4, overriding pkg-config LZ4_LIBS linker flags for LZ4, overriding pkg-config + ZSTD_CFLAGS C compiler flags for ZSTD, overriding pkg-config + ZSTD_LIBS linker flags for ZSTD, overriding pkg-config LDFLAGS_EX extra linker flags for linking executables only LDFLAGS_SL extra linker flags for linking shared libraries only PERL Perl program @@ -8705,6 +8714,137 @@ fi CFLAGS="$LZ4_CFLAGS $CFLAGS" fi +# +# ZSTD +# +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with zstd support" >&5 +$as_echo_n "checking whether to build with zstd support... " >&6; } + + + +# Check whether --with-zstd was given. +if test "${with_zstd+set}" = set; then : + withval=$with_zstd; + case $withval in + yes) + +$as_echo "#define USE_ZSTD 1" >>confdefs.h + + ;; + no) + : + ;; + *) + as_fn_error $? "no argument expected for --with-zstd option" "$LINENO" 5 + ;; + esac + +else + with_zstd=no + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_zstd" >&5 +$as_echo "$with_zstd" >&6; } + + +if test "$with_zstd" = yes; then + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for libzstd" >&5 +$as_echo_n "checking for libzstd... " >&6; } + +if test -n "$ZSTD_CFLAGS"; then + pkg_cv_ZSTD_CFLAGS="$ZSTD_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"libzstd\""; } >&5 + ($PKG_CONFIG --exists --print-errors "libzstd") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_ZSTD_CFLAGS=`$PKG_CONFIG --cflags "libzstd" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$ZSTD_LIBS"; then + pkg_cv_ZSTD_LIBS="$ZSTD_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"libzstd\""; } >&5 + ($PKG_CONFIG --exists --print-errors "libzstd") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_ZSTD_LIBS=`$PKG_CONFIG --libs "libzstd" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + ZSTD_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "libzstd" 2>&1` + else + ZSTD_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "libzstd" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$ZSTD_PKG_ERRORS" >&5 + + as_fn_error $? "Package requirements (libzstd) were not met: + +$ZSTD_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +Alternatively, you may set the environment variables ZSTD_CFLAGS +and ZSTD_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details." "$LINENO" 5 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +Alternatively, you may set the environment variables ZSTD_CFLAGS +and ZSTD_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details. + +To get pkg-config, see <http://pkg-config.freedesktop.org/;. +See \`config.log' for more details" "$LINENO" 5; } +else + ZSTD_CFLAGS=$pkg_cv_ZSTD_CFLAGS + ZSTD_LIBS=$pkg_cv_ZSTD_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +fi + LIBS="$ZSTD_LIBS $LIBS" + CFLAGS="$ZSTD_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -13559,6 +13699,29 @@ done CPPFLAGS=$ac_save_CPPFLAGS fi +if test "$with_zstd" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$ZSTD_CFLAGS $CPPFLAGS" + + # Verify we have zstd's header files + for ac_header in zstd.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "zstd.h" "ac_cv_header_zstd_h" "$ac_includes_default" +if test "x$ac_cv_header_zstd_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_ZSTD_H 1 +_ACEOF + +else + as_fn_error $? "zstd.h header file is required for zstd" "$LINENO" 5 +fi + +done + + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then for ac_header in gssapi/gssapi.h do : diff --git a/configure.ac b/configure.ac index bfcdc88be0..d6f6349067 100644 --- a/configure.ac +++ b/configure.ac @@ -1001,6 +1001,21 @@ if test "$with_lz4" = yes; then CFLAGS="$LZ4_CFLAGS $CFLAGS" fi +# +# ZSTD +# +AC_MSG_CHECKING([whether to build with zstd support]) +PGAC_ARG_BOOL(with, zstd, no, [build with Zstd compression library], + [AC_DEFINE([USE_ZSTD], 1, [Define to 1 to build with zstd support. (--with-zstd)])]) +AC_MSG_RESULT([$with_zstd]) +AC_SUBST(with_zstd) + +if test "$with_zstd" = yes; then + PKG_CHECK_MODULES(ZSTD, libzstd) + LIBS="$ZSTD_LIBS $LIBS" + CFLAGS="$ZSTD_CFLAGS $CFLAGS" +fi + # # Assignments # @@ -1436,6 +1451,17 @@ if test "$with_lz4" = yes; then CPPFLAGS=$ac_save_CPPFLAGS fi +if test "$with_zstd" = yes; then + ac_save_CPPFLAGS=$CPPFLAGS + CPPFLAGS="$ZSTD_CFLAGS $CPPFLAGS" + + # Verify we have zstd's header files + AC_CHECK_HEADERS(zstd.h, [], + [AC_MSG_ERROR([zstd.h header file is required for zstd])]) + + CPPFLAGS=$ac_save_CPPFLAGS +fi + if test "$with_gssapi" = yes ; then AC_CHECK_HEADERS(gssapi/gssapi.h, [], [AC_CHECK_HEADERS(gssapi.h, [], [AC_MSG_ERROR([gssapi.h header file is required for GSSAPI])])]) diff --git a/doc/src/sgml/config.sgml b/doc/src/sgml/config.sgml index 257775c83b..94dd6ef3e9 100644 --- a/doc/src/sgml/config.sgml +++ b/doc/src/sgml/config.sgml @@ -3083,7 +3083,7 @@ include_dir 'conf.d' This parameter selects the compression method used to compress WAL when <varname>wal_compression</varname> is enabled. The supported methods are pglz, zlib, and (if configured when - <productname>PostgreSQL</productname> was built) lz4. + <productname>PostgreSQL</productname> was built) lz4 and zstd. The default value is <literal>pglz</literal>. Only superusers can change this setting. </para> diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c index 3657f74de9..307eee6626 100644 --- a/src/backend/access/transam/xlog.c +++ b/src/backend/access/transam/xlog.c @@ -189,6 +189,9 @@ const struct config_enum_entry wal_compression_options[] = { #endif #ifdef USE_LZ4 {"lz4", WAL_COMPRESSION_LZ4, false}, +#endif +#ifdef USE_ZSTD + {"zstd", WAL_COMPRESSION_ZSTD, false}, #endif {NULL, 0, false} }; diff --git a/src/backend/access/transam/xloginsert.c b/src/backend/access/transam/xloginsert.c index 9fe5c30236..5d1ae37dae 100644 --- a/src/backend/access/transam/xloginsert.c +++ b/src/backend/access/transam/xloginsert.c @@ -41,6 +41,10 @@ #include "lz4.h" #endif +#ifdef USE_ZSTD +#include "zstd.h" +#endif + /* Buffer size required to store a compressed version of backup block image */ #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ) @@ -896,6 +900,21 @@ XLogCompressBackupBlock(char *page, uint16 hole_offset, uint16 hole_length, break; #endif +#ifdef USE_ZSTD + case WAL_COMPRESSION_ZSTD: + len = ZSTD_compress(dest, PGLZ_MAX_BLCKSZ, source, orig_len, 1); + if (ZSTD_isError(len)) + { + ereport(ERROR, + (errcode(ERRCODE_FEATURE_NOT_SUPPORTED), + errmsg("failed compressing zstd: %s", + ZSTD_getErrorName(len)))); + len = -1; + } + + break; +#endif + default: /* * It should be impossible to get here for unsupported algorithms, diff --git a/src/backend/access/transam/xlogreader.c b/src/backend/access/transam/xlogreader.c index fa1e38a810..caa1031d63 100644 --- a/src/backend/access/transam/xlogreader.c +++ b/src/backend/access/transam/xlogreader.c @@ -41,6 +41,10 @@ #include "lz4.h" #endif +#ifdef USE_ZSTD +#include "zstd.h" +#endif + static void report_invalid_record(XLogReaderState *state, const char *fmt,...) pg_attribute_printf(2, 3); static bool allocate_recordbuf(XLogReaderState *state, uint32 reclength); @@ -1564,6 +1568,8 @@ wal_compression_name(WalCompression compression) return "zlib"; case WAL_COMPRESSION_LZ4: return "lz4"; + case WAL_COMPRESSION_ZSTD: + return "zstd"; default: return "???"; } @@ -1621,6 +1627,16 @@ RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page) break; #endif +#ifdef USE_ZSTD + case WAL_COMPRESSION_ZSTD: + decomp_result = ZSTD_decompress(tmp.data, BLCKSZ-bkpb->hole_length, + ptr, bkpb->bimg_len); + // XXX: ZSTD_getErrorName + if (ZSTD_isError(decomp_result)) + decomp_result = -1; + break; +#endif + default: report_invalid_record(record, "image at %X/%X is compressed with unsupported codec, block %d (%d/%s)", (uint32) (record->ReadRecPtr >> 32), diff --git a/src/backend/utils/misc/postgresql.conf.sample b/src/backend/utils/misc/postgresql.conf.sample index 76f494cb9b..d372e2a817 100644 --- a/src/backend/utils/misc/postgresql.conf.sample +++ b/src/backend/utils/misc/postgresql.conf.sample @@ -213,7 +213,7 @@ # open_sync #full_page_writes = on # recover from partial page writes #wal_compression = off # enable compression of full-page writes -#wal_compression_method = pglz # pglz, zlib, lz4 +#wal_compression_method = pglz # pglz, zlib, lz4, zstd #wal_log_hints = off # also do full page writes of non-critical updates # (change requires restart) #wal_init_zero = on # zero-fill new WAL files diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h index e70886b81c..48b16b6083 100644 --- a/src/include/access/xlog_internal.h +++ b/src/include/access/xlog_internal.h @@ -329,6 +329,7 @@ typedef enum WalCompression WAL_COMPRESSION_PGLZ, WAL_COMPRESSION_ZLIB, WAL_COMPRESSION_LZ4, + WAL_COMPRESSION_ZSTD, } WalCompression; extern const char *wal_compression_name(WalCompression compression); diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in index 0a6422da4f..ad26393352 100644 --- a/src/include/pg_config.h.in +++ b/src/include/pg_config.h.in @@ -902,6 +902,9 @@ /* Define to 1 to build with LZ4 support (--with-lz4) */ #undef USE_LZ4 +/* Define to 1 if you have the `zstd' library (-lzstd). */ +#undef USE_ZSTD + /* Define to select named POSIX semaphores. */ #undef USE_NAMED_POSIX_SEMAPHORES diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm index 14605371bb..fff0212087 100644 --- a/src/tools/msvc/Solution.pm +++ b/src/tools/msvc/Solution.pm @@ -486,6 +486,7 @@ sub GenerateFiles USE_LIBXML => undef, USE_LIBXSLT => undef, USE_LZ4 => undef, + USE_ZSTD => $self->{options}->{zstd} ? 1 : undef, USE_LDAP => $self->{options}->{ldap} ? 1 : undef, USE_LLVM => undef, USE_NAMED_POSIX_SEMAPHORES => undef, -- 2.17.0 --XsQoSWH+UP9D9v3l Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="0008-Default-to-zstd.patch" ^ permalink raw reply [nested|flat] 2+ messages in thread
* Re: Truncate logs by max_log_size @ 2024-10-01 15:46 Kirill Gavrilov <[email protected]> 0 siblings, 0 replies; 2+ messages in thread From: Kirill Gavrilov @ 2024-10-01 15:46 UTC (permalink / raw) To: Jim Jones <[email protected]>; +Cc: Andrey M. Borodin <[email protected]>; Euler Taveira <[email protected]>; [email protected] On Tue, Oct 1, 2024 at 2:46 PM Jim Jones <[email protected]> wrote: > > On 27.09.24 12:36, Andrey M. Borodin wrote: > > Consider max_log_size = 10Mb. The perspective might look very different. > > It’s not about WHERE anymore. It's a guard against heavy abuse. > > > > The feature looks very important for me. > I have the same opinion. As a fail safe it sounds very useful to me. > > Unfortunately, the patch does not apply: > > $ git apply > ~/patches/max_log_query/0001-parameter-max_log_size-to-truncate-logs.patch > -v > Checking patch src/backend/utils/error/elog.c... > error: while searching for: > char *Log_destination_string = NULL; > bool syslog_sequence_numbers = true; > bool syslog_split_messages = true; > > /* Processed form of backtrace_symbols GUC */ > static char *backtrace_symbol_list; > > error: patch failed: src/backend/utils/error/elog.c:114 > error: src/backend/utils/error/elog.c: patch does not apply > Checking patch src/backend/utils/misc/guc_tables.c... > Hunk #1 succeeded at 3714 (offset 247 lines). > Checking patch src/backend/utils/misc/postgresql.conf.sample... > Hunk #1 succeeded at 615 (offset 23 lines). > Checking patch src/bin/pg_ctl/t/004_logrotate.pl... > error: while searching for: > check_log_pattern('csvlog', $new_current_logfiles, 'syntax error', $node); > check_log_pattern('jsonlog', $new_current_logfiles, 'syntax error', $node); > > $node->stop(); > > done_testing(); > > error: patch failed: src/bin/pg_ctl/t/004_logrotate.pl:135 > error: src/bin/pg_ctl/t/004_logrotate.pl: patch does not apply > Checking patch src/include/utils/elog.h... > Hunk #1 succeeded at 502 (offset 1 line). > > Does it truncate only single queries or also a transaction with many > statements? > > Thanks! > > Best, Jim > My apologies, attached patch should work on master branch. It truncates single queries and a statement in transaction that occurred an error. Attachments: [application/octet-stream] 0002-parameter-max_log_size-to-truncate-logs.patch (4.7K, ../../CA+E0NR4=J-pgqEAV2weymygGmk1ePym45m2AcGyi2hpa9xRvBg@mail.gmail.com/3-0002-parameter-max_log_size-to-truncate-logs.patch) download | inline diff: From d2eb9ccde970f752be12ce4dbcf40c55806599c9 Mon Sep 17 00:00:00 2001 From: diphantxm <[email protected]> Date: Tue, 1 Oct 2024 17:28:16 +0300 Subject: [PATCH] parameter max_log_size to truncate logs There is no need to log the entire query, because it may be large and take lots of space on disk. Parameter max_log_size set the maximum length for logged query. Everything beyond that length is truncated. Value 0 disables the parameter. --- src/backend/utils/error/elog.c | 8 ++++++++ src/backend/utils/misc/guc_tables.c | 11 +++++++++++ src/backend/utils/misc/postgresql.conf.sample | 2 ++ src/bin/pg_ctl/t/004_logrotate.pl | 15 +++++++++++++++ src/include/utils/elog.h | 1 + 5 files changed, 37 insertions(+) diff --git a/src/backend/utils/error/elog.c b/src/backend/utils/error/elog.c index 5cbb5b5416..0690ec57ce 100644 --- a/src/backend/utils/error/elog.c +++ b/src/backend/utils/error/elog.c @@ -111,6 +111,7 @@ int Log_destination = LOG_DESTINATION_STDERR; char *Log_destination_string = NULL; bool syslog_sequence_numbers = true; bool syslog_split_messages = true; +int max_log_size = 0; /* Processed form of backtrace_functions GUC */ static char *backtrace_function_list; @@ -1693,6 +1694,13 @@ EmitErrorReport(void) CHECK_STACK_DEPTH(); oldcontext = MemoryContextSwitchTo(edata->assoc_context); + if (max_log_size != 0 && debug_query_string != NULL) + { + char* str = debug_query_string; + str[pg_mbcliplen(str, strlen(str), max_log_size)] = '\0'; + debug_query_string = str; + } + /* * Reset the formatted timestamp fields before emitting any logs. This * includes all the log destinations and emit_log_hook, as the latter diff --git a/src/backend/utils/misc/guc_tables.c b/src/backend/utils/misc/guc_tables.c index 686309db58..cf1404c059 100644 --- a/src/backend/utils/misc/guc_tables.c +++ b/src/backend/utils/misc/guc_tables.c @@ -3714,6 +3714,17 @@ struct config_int ConfigureNamesInt[] = NULL, NULL, NULL }, + { + {"max_log_size", PGC_SIGHUP, LOGGING_WHAT, + gettext_noop("Sets max size of logged statement."), + NULL + }, + &max_log_size, + 5 * (1024 * 1024), + 0, INT_MAX, + NULL, NULL, NULL + }, + /* End-of-list marker */ { {NULL, 0, 0, NULL, NULL}, NULL, 0, 0, 0, NULL, NULL, NULL diff --git a/src/backend/utils/misc/postgresql.conf.sample b/src/backend/utils/misc/postgresql.conf.sample index 667e0dc40a..0ffb32d5fb 100644 --- a/src/backend/utils/misc/postgresql.conf.sample +++ b/src/backend/utils/misc/postgresql.conf.sample @@ -615,6 +615,8 @@ # bind-parameter values to N bytes; # -1 means print in full, 0 disables #log_statement = 'none' # none, ddl, mod, all +#max_log_size = 0 # max size of logged statement_timeout + # 0 disables the feature #log_replication_commands = off #log_temp_files = -1 # log temporary files equal or larger # than the specified size in kilobytes; diff --git a/src/bin/pg_ctl/t/004_logrotate.pl b/src/bin/pg_ctl/t/004_logrotate.pl index eacca1a652..1c1f89cb0a 100644 --- a/src/bin/pg_ctl/t/004_logrotate.pl +++ b/src/bin/pg_ctl/t/004_logrotate.pl @@ -69,6 +69,7 @@ log_destination = 'stderr, csvlog, jsonlog' # these ensure stability of test results: log_rotation_age = 0 lc_messages = 'C' +max_log_size = 32 )); $node->start(); @@ -135,6 +136,20 @@ check_log_pattern('stderr', $new_current_logfiles, 'syntax error', $node); check_log_pattern('csvlog', $new_current_logfiles, 'syntax error', $node); check_log_pattern('jsonlog', $new_current_logfiles, 'syntax error', $node); +$node->psql('postgres', 'INSERT INTO SOME_NON_EXISTANT_TABLE VALUES (TEST)'); +for (my $attempts = 0; $attempts < $max_attempts; $attempts++) +{ + eval { + $current_logfiles = slurp_file($node->data_dir . '/current_logfiles'); + }; + last unless $@; + usleep(100_000); +} +die $@ if $@; +check_log_pattern('stderr', $current_logfiles, 'INSERT INTO SOME_NON_EXISTANT_TA(?!(BLE VALUES \(TEST\)))', $node); +check_log_pattern('csvlog', $current_logfiles, 'INSERT INTO SOME_NON_EXISTANT_TA(?!(BLE VALUES \(TEST\)))', $node); +check_log_pattern('jsonlog', $current_logfiles, 'INSERT INTO SOME_NON_EXISTANT_TA(?!(BLE VALUES \(TEST\)))', $node); + $node->stop(); done_testing(); diff --git a/src/include/utils/elog.h b/src/include/utils/elog.h index e54eca5b48..a8e30006f2 100644 --- a/src/include/utils/elog.h +++ b/src/include/utils/elog.h @@ -502,6 +502,7 @@ extern PGDLLIMPORT int Log_destination; extern PGDLLIMPORT char *Log_destination_string; extern PGDLLIMPORT bool syslog_sequence_numbers; extern PGDLLIMPORT bool syslog_split_messages; +extern PGDLLIMPORT int max_log_size; /* Log destination bitmap */ #define LOG_DESTINATION_STDERR 1 -- 2.39.2 (Apple Git-143) ^ permalink raw reply [nested|flat] 2+ messages in thread
end of thread, other threads:[~2024-10-01 15:46 UTC | newest] Thread overview: 2+ messages (download: mbox mbox.gz follow: Atom feed) -- links below jump to the message on this page -- 2021-03-12 20:43 [PATCH 07/10] add wal_compression_method: zstd Justin Pryzby <[email protected]> 2024-10-01 15:46 Re: Truncate logs by max_log_size Kirill Gavrilov <[email protected]>
This inbox is served by agora; see mirroring instructions for how to clone and mirror all data and code used for this inbox