[PATCH v35 2/5] Refactor index_concurrently_create_copy() for use with REPACK (CONCURRENTLY).

agora inbox for [email protected]  
help / color / mirror / Atom feed

[PATCH v35 2/5] Refactor index_concurrently_create_copy() for use with REPACK (CONCURRENTLY).
216+ messages / 3 participants
[nested] [flat]

* [PATCH v35 2/5] Refactor index_concurrently_create_copy() for use with REPACK (CONCURRENTLY).
@ 2026-02-16 19:49 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Antonin Houska @ 2026-02-16 19:49 UTC (permalink / raw)

This patch moves the code to index_create_copy() and adds a "concurrently"
parameter so it can be used by REPACK (CONCURRENTLY).

With the CONCURRENTLY option, REPACK cannot simply swap the heap file and
rebuild its indexes. Instead, it needs to build a separate set of indexes
(including system catalog entries) *before* the actual swap, to reduce the
time AccessExclusiveLock needs to be held for.
---
 src/backend/catalog/index.c      | 54 +++++++++++++++++++++++---------
 src/backend/commands/indexcmds.c |  6 ++--
 src/backend/nodes/makefuncs.c    |  9 +++---
 src/include/catalog/index.h      |  3 ++
 src/include/nodes/makefuncs.h    |  4 ++-
 5 files changed, 54 insertions(+), 22 deletions(-)

diff --git a/src/backend/catalog/index.c b/src/backend/catalog/index.c
index 5ee6389d39c..f8e6c3d804e 100644
--- a/src/backend/catalog/index.c
+++ b/src/backend/catalog/index.c
@@ -1288,15 +1288,32 @@ index_create(Relation heapRelation,
 /*
  * index_concurrently_create_copy
  *
- * Create concurrently an index based on the definition of the one provided by
- * caller.  The index is inserted into catalogs and needs to be built later
- * on.  This is called during concurrent reindex processing.
- *
- * "tablespaceOid" is the tablespace to use for this index.
+ * Variant of index_create_copy(), called during concurrent reindex
+ * processing.
  */
 Oid
 index_concurrently_create_copy(Relation heapRelation, Oid oldIndexId,
 							   Oid tablespaceOid, const char *newName)
+{
+	return index_create_copy(heapRelation, oldIndexId, tablespaceOid, newName,
+							 true);
+}
+
+/*
+ * index_create_copy
+ *
+ * Create an index based on the definition of the one provided by caller.  The
+ * index is inserted into catalogs. If 'concurrently' is TRUE, it needs to be
+ * built later on, otherwise it's built immediately.
+ *
+ * "tablespaceOid" is the tablespace to use for this index.
+ *
+ * The actual implementation of index_concurrently_create_copy(), reusable for
+ * other purposes.
+ */
+Oid
+index_create_copy(Relation heapRelation, Oid oldIndexId, Oid tablespaceOid,
+				  const char *newName, bool concurrently)
 {
 	Relation	indexRelation;
 	IndexInfo  *oldInfo,
@@ -1315,6 +1332,7 @@ index_concurrently_create_copy(Relation heapRelation, Oid oldIndexId,
 	List	   *indexColNames = NIL;
 	List	   *indexExprs = NIL;
 	List	   *indexPreds = NIL;
+	int			flags = 0;
 
 	indexRelation = index_open(oldIndexId, RowExclusiveLock);
 
@@ -1325,7 +1343,7 @@ index_concurrently_create_copy(Relation heapRelation, Oid oldIndexId,
 	 * Concurrent build of an index with exclusion constraints is not
 	 * supported.
 	 */
-	if (oldInfo->ii_ExclusionOps != NULL)
+	if (oldInfo->ii_ExclusionOps != NULL && concurrently)
 		ereport(ERROR,
 				(errcode(ERRCODE_FEATURE_NOT_SUPPORTED),
 				 errmsg("concurrent index creation for exclusion constraints is not supported")));
@@ -1381,9 +1399,7 @@ index_concurrently_create_copy(Relation heapRelation, Oid oldIndexId,
 	}
 
 	/*
-	 * Build the index information for the new index.  Note that rebuild of
-	 * indexes with exclusion constraints is not supported, hence there is no
-	 * need to fill all the ii_Exclusion* fields.
+	 * Build the index information for the new index.
 	 */
 	newInfo = makeIndexInfo(oldInfo->ii_NumIndexAttrs,
 							oldInfo->ii_NumIndexKeyAttrs,
@@ -1392,10 +1408,13 @@ index_concurrently_create_copy(Relation heapRelation, Oid oldIndexId,
 							indexPreds,
 							oldInfo->ii_Unique,
 							oldInfo->ii_NullsNotDistinct,
-							false,	/* not ready for inserts */
-							true,
+							!concurrently,	/* isready */
+							concurrently,	/* concurrent */
 							indexRelation->rd_indam->amsummarizing,
-							oldInfo->ii_WithoutOverlaps);
+							oldInfo->ii_WithoutOverlaps,
+							oldInfo->ii_ExclusionOps,
+							oldInfo->ii_ExclusionProcs,
+							oldInfo->ii_ExclusionStrats);
 
 	/*
 	 * Extract the list of column names and the column numbers for the new
@@ -1433,6 +1452,9 @@ index_concurrently_create_copy(Relation heapRelation, Oid oldIndexId,
 		stattargets[i].isnull = isnull;
 	}
 
+	if (concurrently)
+		flags = INDEX_CREATE_SKIP_BUILD | INDEX_CREATE_CONCURRENT;
+
 	/*
 	 * Now create the new index.
 	 *
@@ -1456,7 +1478,7 @@ index_concurrently_create_copy(Relation heapRelation, Oid oldIndexId,
 							  indcoloptions->values,
 							  stattargets,
 							  reloptionsDatum,
-							  INDEX_CREATE_SKIP_BUILD | INDEX_CREATE_CONCURRENT,
+							  flags,
 							  0,
 							  true, /* allow table to be a system catalog? */
 							  false,	/* is_internal? */
@@ -2450,7 +2472,8 @@ BuildIndexInfo(Relation index)
 					   indexStruct->indisready,
 					   false,
 					   index->rd_indam->amsummarizing,
-					   indexStruct->indisexclusion && indexStruct->indisunique);
+					   indexStruct->indisexclusion && indexStruct->indisunique,
+					   NULL, NULL, NULL);
 
 	/* fill in attribute numbers */
 	for (i = 0; i < numAtts; i++)
@@ -2510,7 +2533,8 @@ BuildDummyIndexInfo(Relation index)
 					   indexStruct->indisready,
 					   false,
 					   index->rd_indam->amsummarizing,
-					   indexStruct->indisexclusion && indexStruct->indisunique);
+					   indexStruct->indisexclusion && indexStruct->indisunique,
+					   NULL, NULL, NULL);
 
 	/* fill in attribute numbers */
 	for (i = 0; i < numAtts; i++)
diff --git a/src/backend/commands/indexcmds.c b/src/backend/commands/indexcmds.c
index 635679cc1f2..34209bd1393 100644
--- a/src/backend/commands/indexcmds.c
+++ b/src/backend/commands/indexcmds.c
@@ -243,7 +243,8 @@ CheckIndexCompatible(Oid oldId,
 	 */
 	indexInfo = makeIndexInfo(numberOfAttributes, numberOfAttributes,
 							  accessMethodId, NIL, NIL, false, false,
-							  false, false, amsummarizing, isWithoutOverlaps);
+							  false, false, amsummarizing, isWithoutOverlaps,
+							  NULL, NULL, NULL);
 	typeIds = palloc_array(Oid, numberOfAttributes);
 	collationIds = palloc_array(Oid, numberOfAttributes);
 	opclassIds = palloc_array(Oid, numberOfAttributes);
@@ -930,7 +931,8 @@ DefineIndex(ParseState *pstate,
 							  !concurrent,
 							  concurrent,
 							  amissummarizing,
-							  stmt->iswithoutoverlaps);
+							  stmt->iswithoutoverlaps,
+							  NULL, NULL, NULL);
 
 	typeIds = palloc_array(Oid, numberOfAttributes);
 	collationIds = palloc_array(Oid, numberOfAttributes);
diff --git a/src/backend/nodes/makefuncs.c b/src/backend/nodes/makefuncs.c
index 2caec621d73..ca7e21e8349 100644
--- a/src/backend/nodes/makefuncs.c
+++ b/src/backend/nodes/makefuncs.c
@@ -834,7 +834,8 @@ IndexInfo *
 makeIndexInfo(int numattrs, int numkeyattrs, Oid amoid, List *expressions,
 			  List *predicates, bool unique, bool nulls_not_distinct,
 			  bool isready, bool concurrent, bool summarizing,
-			  bool withoutoverlaps)
+			  bool withoutoverlaps, Oid *exclusion_ops, Oid *exclusion_procs,
+			  uint16 *exclusion_strats)
 {
 	IndexInfo  *n = makeNode(IndexInfo);
 
@@ -863,9 +864,9 @@ makeIndexInfo(int numattrs, int numkeyattrs, Oid amoid, List *expressions,
 	n->ii_PredicateState = NULL;
 
 	/* exclusion constraints */
-	n->ii_ExclusionOps = NULL;
-	n->ii_ExclusionProcs = NULL;
-	n->ii_ExclusionStrats = NULL;
+	n->ii_ExclusionOps = exclusion_ops;
+	n->ii_ExclusionProcs = exclusion_procs;
+	n->ii_ExclusionStrats = exclusion_strats;
 
 	/* speculative inserts */
 	n->ii_UniqueOps = NULL;
diff --git a/src/include/catalog/index.h b/src/include/catalog/index.h
index b259c4141ed..3426087b445 100644
--- a/src/include/catalog/index.h
+++ b/src/include/catalog/index.h
@@ -99,6 +99,9 @@ extern Oid	index_concurrently_create_copy(Relation heapRelation,
 										   Oid oldIndexId,
 										   Oid tablespaceOid,
 										   const char *newName);
+extern Oid	index_create_copy(Relation heapRelation, Oid oldIndexId,
+							  Oid tablespaceOid, const char *newName,
+							  bool concurrently);
 
 extern void index_concurrently_build(Oid heapRelationId,
 									 Oid indexRelationId);
diff --git a/src/include/nodes/makefuncs.h b/src/include/nodes/makefuncs.h
index 982ec25ae14..dcea148ae1a 100644
--- a/src/include/nodes/makefuncs.h
+++ b/src/include/nodes/makefuncs.h
@@ -99,7 +99,9 @@ extern IndexInfo *makeIndexInfo(int numattrs, int numkeyattrs, Oid amoid,
 								List *expressions, List *predicates,
 								bool unique, bool nulls_not_distinct,
 								bool isready, bool concurrent,
-								bool summarizing, bool withoutoverlaps);
+								bool summarizing, bool withoutoverlaps,
+								Oid *exclusion_ops, Oid *exclusion_procs,
+								uint16 *exclusion_strats);
 
 extern Node *makeStringConst(char *str, int location);
 extern DefElem *makeDefElem(char *name, Node *arg, int location);
-- 
2.47.3


--kmtyk4ln3767qrma
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
	filename="v35-0003-Move-conversion-of-a-historic-to-MVCC-snapshot-t.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* ci: Generate crashlogs on Windows
@ 2026-06-10 12:59 Nazir Bilal Yavuz <[email protected]>
  2026-06-10 13:49 ` Re: ci: Generate crashlogs on Windows Andres Freund <[email protected]>
  0 siblings, 1 reply; 216+ messages in thread

From: Nazir Bilal Yavuz @ 2026-06-10 12:59 UTC (permalink / raw)
  To: pgsql-hackers; +Cc: Andres Freund <[email protected]>

Hi,

cdb.exe was available on GHA Windows images but it wasn't configured
to generate crashlogs. Attached patch configures cdb.exe to generate
crashlogs to "<github.workspace>\crashlogs\" in
"crashlog-<pid-in-hex>.txt" format. Current upload logs step already
collects these logs so no change is needed there.

Most of the logic is copied from where (previous) Postgres CI Windows
images were generated [1]. When I use the '!adplusext.adpprocname'
debugger flag, the CI job hangs. It needs 'adplusext.dll' to run but
it isn't available on GHA Windows images.

Example GHA run which crashlogs are generated and collected:
https://github.com/nbyavuz/postgres/actions/runs/27275147059

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

-- 
Regards,
Nazir Bilal Yavuz
Microsoft


Attachments:

  [text/x-patch] v1-0001-ci-Generate-crashlogs-on-Windows.patch (6.7K, ../../CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow@mail.gmail.com/2-v1-0001-ci-Generate-crashlogs-on-Windows.patch)
  download | inline diff:
From a60a5821352f59ba2ba31330610811eb61e9efe5 Mon Sep 17 00:00:00 2001
From: Nazir Bilal Yavuz <[email protected]>
Date: Tue, 9 Jun 2026 16:15:30 +0300
Subject: [PATCH v1] ci: Generate crashlogs on Windows

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this step is too long, it is implemented as composite action.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion:
---
 .../actions/windows-setup-debugger/action.yml | 82 +++++++++++++++++++
 .github/workflows/pg-ci.yml                   | 12 +--
 2 files changed, 88 insertions(+), 6 deletions(-)
 create mode 100644 .github/actions/windows-setup-debugger/action.yml

diff --git a/.github/actions/windows-setup-debugger/action.yml b/.github/actions/windows-setup-debugger/action.yml
new file mode 100644
index 00000000000..e6e5192db39
--- /dev/null
+++ b/.github/actions/windows-setup-debugger/action.yml
@@ -0,0 +1,82 @@
+name: Setup Windows debugger
+description: >-
+  Setup Windows debugger to log all crashes to
+  <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+runs:
+  using: composite
+  steps:
+    - name: Setup Windows debugger
+      shell: pwsh
+      run: |
+        $crashdir = "${{ github.workspace }}/crashlogs"
+        New-Item -ItemType Directory -Force -Path $crashdir
+
+        # Ensure restricted child processes can write the log file
+        icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+        # Prevent windows error handling dialog from causing hangs
+        New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+          -Name 'DontShowUI' -Value 1 -PropertyType DWord
+        New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+          -Name 'Disabled' -Value 1 -PropertyType DWord
+
+        ### Fallback minidumps if the JIT debugger below doesn't run
+        New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+          -Name 'LocalDumps'
+        New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+          -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+        New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+          -Name 'DumpCount' -Value 5 -PropertyType DWord
+        New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+          -Name 'DumpType'  -Value 1 -PropertyType DWord
+        ###
+
+        $cdb64 = @(
+            'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+            'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+          ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+        $cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+        ###
+        # -p PID:
+        #   Specifies the decimal process ID to be debugged. This is used to
+        #   debug a process that is already running.
+        # -e Event:
+        #   Signals the debugger that the specified event has occurred. This
+        #   option is only used when starting the debugger programmatically.
+        # -g:
+        #   Ignores the initial breakpoint in target application. This option
+        #   will cause the target application to continue running after it is
+        #   started or CDB attaches to it, unless another breakpoint has been
+        #   set.
+        # -kqm:
+        #   Starts CDB/NTSD in quiet mode.
+        # -c "command":
+        #   Specifies the initial debugger command to run at start-up. This
+        #   command must be surrounded with quotation marks. Multiple commands
+        #   can be separated with semicolons.
+        ###
+        $debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+        Write-Host "Using cdb (x64): $cdb64"
+        Set-ItemProperty `
+          -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+          -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+        New-ItemProperty -Force -PropertyType DWord -Value 1 `
+          -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+          -Name 'Auto'
+
+        Write-Host "Using cdb (x86): $cdb86"
+        Set-ItemProperty `
+          -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+          -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+        New-ItemProperty -Force -PropertyType DWord -Value 1 `
+          -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+          -Name 'Auto'
+
+        # Show registered AeDebug values for diagnostics
+        Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+          Format-List Debugger,Auto
+        Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+          Format-List Debugger,Auto
diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..7331b261166 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,9 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - name: Setup Windows debugger
+        uses: ./.github/actions/windows-setup-debugger
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1022,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1116,9 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - name: Setup Windows debugger
+        uses: ./.github/actions/windows-setup-debugger
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1141,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
-- 
2.47.3



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* Re: ci: Generate crashlogs on Windows
  2026-06-10 12:59 ci: Generate crashlogs on Windows Nazir Bilal Yavuz <[email protected]>
@ 2026-06-10 13:49 ` Andres Freund <[email protected]>
  2026-06-10 15:54   ` Re: ci: Generate crashlogs on Windows Nazir Bilal Yavuz <[email protected]>
  0 siblings, 1 reply; 216+ messages in thread

From: Andres Freund @ 2026-06-10 13:49 UTC (permalink / raw)
  To: Nazir Bilal Yavuz <[email protected]>; +Cc: pgsql-hackers

Hi,

On 2026-06-10 15:59:20 +0300, Nazir Bilal Yavuz wrote:
> cdb.exe was available on GHA Windows images but it wasn't configured
> to generate crashlogs. Attached patch configures cdb.exe to generate
> crashlogs to "<github.workspace>\crashlogs\" in
> "crashlog-<pid-in-hex>.txt" format. Current upload logs step already
> collects these logs so no change is needed there.
> 
> Most of the logic is copied from where (previous) Postgres CI Windows
> images were generated [1]. When I use the '!adplusext.adpprocname'
> debugger flag, the CI job hangs. It needs 'adplusext.dll' to run but
> it isn't available on GHA Windows images.
> 
> Example GHA run which crashlogs are generated and collected:
> https://github.com/nbyavuz/postgres/actions/runs/27275147059

Thanks for working on this!

> +++ b/.github/actions/windows-setup-debugger/action.yml
> @@ -0,0 +1,82 @@
> +name: Setup Windows debugger
> +description: >-
> +  Setup Windows debugger to log all crashes to
> +  <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
> +
> +runs:
> +  using: composite
> +  steps:
> +    - name: Setup Windows debugger
> +      shell: pwsh
> +      run: |
> +        $crashdir = "${{ github.workspace }}/crashlogs"
> +        New-Item -ItemType Directory -Force -Path $crashdir

Any reason to not just put this into src/tools/ci/<something>.ps1? Given that
we're just talking about a single step, I don't really see the benefit of a
composite action here.

Greetings,

Andres Freund





^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* Re: ci: Generate crashlogs on Windows
  2026-06-10 12:59 ci: Generate crashlogs on Windows Nazir Bilal Yavuz <[email protected]>
  2026-06-10 13:49 ` Re: ci: Generate crashlogs on Windows Andres Freund <[email protected]>
@ 2026-06-10 15:54   ` Nazir Bilal Yavuz <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Nazir Bilal Yavuz @ 2026-06-10 15:54 UTC (permalink / raw)
  To: Andres Freund <[email protected]>; +Cc: pgsql-hackers

Hi,

Thank you for looking into this!

On Wed, 10 Jun 2026 at 16:49, Andres Freund <[email protected]> wrote:
>
> On 2026-06-10 15:59:20 +0300, Nazir Bilal Yavuz wrote:
> > +++ b/.github/actions/windows-setup-debugger/action.yml
> > @@ -0,0 +1,82 @@
> > +name: Setup Windows debugger
> > +description: >-
> > +  Setup Windows debugger to log all crashes to
> > +  <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
> > +
> > +runs:
> > +  using: composite
> > +  steps:
> > +    - name: Setup Windows debugger
> > +      shell: pwsh
> > +      run: |
> > +        $crashdir = "${{ github.workspace }}/crashlogs"
> > +        New-Item -ItemType Directory -Force -Path $crashdir
>
> Any reason to not just put this into src/tools/ci/<something>.ps1? Given that
> we're just talking about a single step, I don't really see the benefit of a
> composite action here.

Not any particular reason. I started implementing that in a pg-ci.yml,
then moved it to composite action when I realized it was too long. I
think having a script is better, so attached v2 uses that way.

-- 
Regards,
Nazir Bilal Yavuz
Microsoft


Attachments:

  [text/x-patch] v2-0001-ci-Generate-crashlogs-on-Windows.patch (6.2K, ../../CAN55FZ3X-PEwnzy_iW1yT9YoAb2u7bfKyoKsKV9_yrUg7rXd=g@mail.gmail.com/2-v2-0001-ci-Generate-crashlogs-on-Windows.patch)
  download | inline diff:
From 5655e2550c1c040955f6b33f28fd3736decffd0f Mon Sep 17 00:00:00 2001
From: Nazir Bilal Yavuz <[email protected]>
Date: Tue, 9 Jun 2026 16:15:30 +0300
Subject: [PATCH v2] ci: Generate crashlogs on Windows

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this step is too long, it is implemented as
'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.47.3



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

* [PATCH v13a 1/9] ci: Generate crashlogs on Windows
@ 2026-06-11 13:15 Andres Freund <[email protected]>
  0 siblings, 0 replies; 216+ messages in thread

From: Andres Freund @ 2026-06-11 13:15 UTC (permalink / raw)

cdb.exe is configured to log all crashes to
"<workspace>\crashlogs\crashlog-<pid-in-hex>.txt". Upload logs step
already configured to collect these logs, so no change is needed on
there.

Logic is copied from where Postgres CI Windows images are generated [1].
Since this would be too long to include inline in pg-ci.yml, it is implemented
as 'src/tools/ci/gha_setup_windows_debugger.ps1' script.

[1] https://github.com/anarazel/pg-vm-images/blob/main/scripts/windows_install_dbg.ps1

Author: Nazir Bilal Yavuz <[email protected]>
Discussion: https://postgr.es/m/CAN55FZ1BgsXSTzOpehnMa4NzWL8Aivsxx-di7-VT6bZ3j2Omow%40mail.gmail.com
---
 .github/workflows/pg-ci.yml                 | 13 ++--
 src/tools/ci/gha_setup_windows_debugger.ps1 | 75 +++++++++++++++++++++
 2 files changed, 82 insertions(+), 6 deletions(-)
 create mode 100644 src/tools/ci/gha_setup_windows_debugger.ps1

diff --git a/.github/workflows/pg-ci.yml b/.github/workflows/pg-ci.yml
index 5bc5292d2a5..742a8431782 100644
--- a/.github/workflows/pg-ci.yml
+++ b/.github/workflows/pg-ci.yml
@@ -990,6 +990,11 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - &windows_setup_debugger_step
+        name: Setup Windows debugger
+        shell: pwsh
+        run: src/tools/ci/gha_setup_windows_debugger.ps1
+
       - name: Configure
         run: |
           call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
@@ -1019,9 +1024,6 @@ jobs:
             call "C:\Program Files\Microsoft Visual Studio\2022\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64
         run: *meson_test_world_cmd
 
-      # TODO: We need to collect crashlogs but for them to be generated, we'd
-      # have to configure the JIT Debugger to do so. cdb.exe is installed on
-      # the runner so that is possible.
       - *upload_logs_step
 
 
@@ -1116,6 +1118,8 @@ jobs:
         shell: cmd
         run: mkdir ${{env.PG_REGRESS_SOCK_DIR}}
 
+      - *windows_setup_debugger_step
+
       - *ccache_restore_default_step
       - *ccache_restore_branch_step
 
@@ -1138,9 +1142,6 @@ jobs:
       - name: Test world
         run: *meson_test_world_cmd
 
-      # TODO: We want to include crashlogs, but they are not yet
-      # collected. cdb.exe is installed on the runner, so we can configure it
-      # appropriately.
       - *upload_logs_step
 
 
diff --git a/src/tools/ci/gha_setup_windows_debugger.ps1 b/src/tools/ci/gha_setup_windows_debugger.ps1
new file mode 100644
index 00000000000..babfbe76278
--- /dev/null
+++ b/src/tools/ci/gha_setup_windows_debugger.ps1
@@ -0,0 +1,75 @@
+# Setup Windows debugger to log all crashes to
+# <workspace>\crashlogs\crashlog-<pid-in-hex>.txt
+
+$ErrorActionPreference = 'Stop'
+
+$crashdir = "$env:GITHUB_WORKSPACE/crashlogs"
+New-Item -ItemType Directory -Force -Path $crashdir
+
+# Ensure restricted child processes can write the log file
+icacls $crashdir /grant "${env:USERNAME}:(OI)(CI)F" /Q
+
+# Prevent windows error handling dialog from causing hangs
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'DontShowUI' -Value 1 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'Disabled' -Value 1 -PropertyType DWord
+
+### Fallback minidumps if the JIT debugger below doesn't run
+New-Item -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting' `
+    -Name 'LocalDumps'
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpFolder' -Value $crashdir -PropertyType ExpandString
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpCount' -Value 5 -PropertyType DWord
+New-ItemProperty -Force -Path 'HKLM:\SOFTWARE\Microsoft\Windows\Windows Error Reporting\LocalDumps' `
+    -Name 'DumpType'  -Value 1 -PropertyType DWord
+###
+
+$cdb64 = @(
+    'C:\Program Files (x86)\Windows Kits\10\Debuggers\x64\cdb.exe',
+    'C:\Program Files\Windows Kits\10\Debuggers\x64\cdb.exe'
+    ) | Where-Object { Test-Path $_ } | Select-Object -First 1
+$cdb86 = $cdb64.Replace('\x64\', '\x86\')
+
+###
+# -p PID:
+#   Specifies the decimal process ID to be debugged. This is used to debug a
+#   process that is already running.
+# -e Event:
+#   Signals the debugger that the specified event has occurred. This option is
+#   only used when starting the debugger programmatically.
+# -g:
+#   Ignores the initial breakpoint in target application. This option will
+#   cause the target application to continue running after it is started or
+#   CDB attaches to it, unless another breakpoint has been set.
+# -kqm:
+#   Starts CDB/NTSD in quiet mode.
+# -c "command":
+#   Specifies the initial debugger command to run at start-up. This command
+#   must be surrounded with quotation marks. Multiple commands can be
+#   separated with semicolons.
+###
+$debuggerArgs = ' -p %ld -e %ld -g -kqm -c ".lines -e; .symfix+ ; aS /x proc $tpid ; .block {.logappend ' + "$crashdir/crashlog-" + '${proc}.txt} ; lsa $ip ; ~*kP ; !peb ; .logclose ; q "'
+
+Write-Host "Using cdb (x64): $cdb64"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb64 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+Write-Host "Using cdb (x86): $cdb86"
+Set-ItemProperty `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Debugger' -Value ('"' + $cdb86 + '"' + $debuggerArgs)
+New-ItemProperty -Force -PropertyType DWord -Value 1 `
+    -Path 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' `
+    -Name 'Auto'
+
+# Show registered AeDebug values for diagnostics
+Get-ItemProperty 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
+Get-ItemProperty 'HKLM:\SOFTWARE\WOW6432Node\Microsoft\Windows NT\CurrentVersion\AeDebug' |
+    Format-List Debugger,Auto
-- 
2.54.0.450.g9ac3f193c0


--mr2uqtieh2e2xvha
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v13a-0002-ci-Use-meson-for-most-of-CompilerWarnings-it-s-.patch"



^ permalink  raw  reply  [nested|flat] 216+ messages in thread

end of thread, other threads:[~2026-06-11 13:15 UTC | newest]

Thread overview: 216+ messages (download: mbox mbox.gz follow: Atom feed)
-- links below jump to the message on this page --
2026-02-16 19:49 [PATCH v35 2/5] Refactor index_concurrently_create_copy() for use with REPACK (CONCURRENTLY). Antonin Houska <[email protected]>
2026-06-10 12:59 ci: Generate crashlogs on Windows Nazir Bilal Yavuz <[email protected]>
2026-06-10 13:49 ` Re: ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-10 15:54   ` Re: ci: Generate crashlogs on Windows Nazir Bilal Yavuz <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>
2026-06-11 13:15 [PATCH v13a 1/9] ci: Generate crashlogs on Windows Andres Freund <[email protected]>

This inbox is served by agora; see mirroring instructions
for how to clone and mirror all data and code used for this inbox