agora inbox for pgsql-hackers@postgresql.orghelp / color / mirror / Atom feed
[PATCH v3 1/2] abstract architecture-specific implementation details from pg_lfind32() 327+ messages / 2 participants [nested] [flat]
* [PATCH v3 1/2] abstract architecture-specific implementation details from pg_lfind32() @ 2022-08-26 05:18 Nathan Bossart <nathandbossart@gmail.com> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2022-08-26 05:18 UTC (permalink / raw) --- src/include/port/pg_lfind.h | 55 ++++++++++++++++++---------------- src/include/port/simd.h | 60 +++++++++++++++++++++++++++++++++++++ 2 files changed, 90 insertions(+), 25 deletions(-) diff --git a/src/include/port/pg_lfind.h b/src/include/port/pg_lfind.h index a4e13dffec..7a851ea42c 100644 --- a/src/include/port/pg_lfind.h +++ b/src/include/port/pg_lfind.h @@ -91,16 +91,19 @@ pg_lfind32(uint32 key, uint32 *base, uint32 nelem) { uint32 i = 0; -#ifdef USE_SSE2 +#ifndef USE_NO_SIMD /* - * A 16-byte register only has four 4-byte lanes. For better - * instruction-level parallelism, each loop iteration operates on a block - * of four registers. Testing has showed this is ~40% faster than using a - * block of two registers. + * For better instruction-level parallelism, each loop iteration operates + * on a block of four registers. Testing for SSE2 has showed this is ~40% + * faster than using a block of two registers. */ - const __m128i keys = _mm_set1_epi32(key); /* load 4 copies of key */ - uint32 iterations = nelem & ~0xF; /* round down to multiple of 16 */ + const Vector32 keys = vector32_broadcast(key); /* load copies of key */ + uint32 nelem_per_vector = sizeof(Vector32) / sizeof(uint32); + uint32 nelem_per_iteration = 4 * nelem_per_vector; + + /* round down to multiple of elements per iteration */ + uint32 tail_idx = nelem & ~(nelem_per_iteration - 1); #if defined(USE_ASSERT_CHECKING) bool assert_result = false; @@ -116,31 +119,33 @@ pg_lfind32(uint32 key, uint32 *base, uint32 nelem) } #endif - for (i = 0; i < iterations; i += 16) + for (i = 0; i < tail_idx; i += nelem_per_iteration) { - /* load the next block into 4 registers holding 4 values each */ - const __m128i vals1 = _mm_loadu_si128((__m128i *) & base[i]); - const __m128i vals2 = _mm_loadu_si128((__m128i *) & base[i + 4]); - const __m128i vals3 = _mm_loadu_si128((__m128i *) & base[i + 8]); - const __m128i vals4 = _mm_loadu_si128((__m128i *) & base[i + 12]); + Vector32 vals1, vals2, vals3, vals4, + result1, result2, result3, result4, + tmp1, tmp2, result; + + /* load the next block into 4 registers */ + vector32_load(&vals1, &base[i]); + vector32_load(&vals2, &base[i + nelem_per_vector]); + vector32_load(&vals3, &base[i + nelem_per_vector * 2]); + vector32_load(&vals4, &base[i + nelem_per_vector * 3]); /* compare each value to the key */ - const __m128i result1 = _mm_cmpeq_epi32(keys, vals1); - const __m128i result2 = _mm_cmpeq_epi32(keys, vals2); - const __m128i result3 = _mm_cmpeq_epi32(keys, vals3); - const __m128i result4 = _mm_cmpeq_epi32(keys, vals4); + result1 = vector32_eq(keys, vals1); + result2 = vector32_eq(keys, vals2); + result3 = vector32_eq(keys, vals3); + result4 = vector32_eq(keys, vals4); /* combine the results into a single variable */ - const __m128i tmp1 = _mm_or_si128(result1, result2); - const __m128i tmp2 = _mm_or_si128(result3, result4); - const __m128i result = _mm_or_si128(tmp1, tmp2); + tmp1 = vector32_or(result1, result2); + tmp2 = vector32_or(result3, result4); + result = vector32_or(tmp1, tmp2); /* see if there was a match */ - if (_mm_movemask_epi8(result) != 0) + if (vector32_any_lane_set(result)) { -#if defined(USE_ASSERT_CHECKING) Assert(assert_result == true); -#endif return true; } } @@ -151,14 +156,14 @@ pg_lfind32(uint32 key, uint32 *base, uint32 nelem) { if (key == base[i]) { -#if defined(USE_SSE2) && defined(USE_ASSERT_CHECKING) +#ifndef USE_NO_SIMD Assert(assert_result == true); #endif return true; } } -#if defined(USE_SSE2) && defined(USE_ASSERT_CHECKING) +#ifndef USE_NO_SIMD Assert(assert_result == false); #endif return false; diff --git a/src/include/port/simd.h b/src/include/port/simd.h index 8f85153110..bd4f1a3f39 100644 --- a/src/include/port/simd.h +++ b/src/include/port/simd.h @@ -32,6 +32,7 @@ #include <emmintrin.h> #define USE_SSE2 typedef __m128i Vector8; +typedef __m128i Vector32; #else /* @@ -40,18 +41,24 @@ typedef __m128i Vector8; */ #define USE_NO_SIMD typedef uint64 Vector8; +typedef uint64 Vector32; #endif static inline void vector8_load(Vector8 *v, const uint8 *s); +static inline void vector32_load(Vector32 *v, const uint32 *s); static inline Vector8 vector8_broadcast(const uint8 c); +static inline Vector32 vector32_broadcast(const uint32 c); static inline bool vector8_has_zero(const Vector8 v); static inline bool vector8_has(const Vector8 v, const uint8 c); static inline bool vector8_has_le(const Vector8 v, const uint8 c); static inline bool vector8_is_highbit_set(const Vector8 v); static inline Vector8 vector8_or(const Vector8 v1, const Vector8 v2); +static inline Vector32 vector32_or(const Vector32 v1, const Vector32 v2); #ifndef USE_NO_SIMD static inline Vector8 vector8_eq(const Vector8 v1, const Vector8 v2); +static inline Vector32 vector32_eq(const Vector32 v1, const Vector32 v2); +static inline bool vector32_any_lane_set(const Vector32 v); #endif /* @@ -68,6 +75,16 @@ vector8_load(Vector8 *v, const uint8 *s) #endif } +static inline void +vector32_load(Vector32 *v, const uint32 *s) +{ +#ifdef USE_SSE2 + *v = _mm_loadu_si128((const __m128i *) s); +#else + memcpy(v, s, sizeof(Vector32)); +#endif +} + /* * Functions for creating a vector with all elements set to the same value. @@ -83,6 +100,16 @@ vector8_broadcast(const uint8 c) #endif } +static inline Vector32 +vector32_broadcast(const uint32 c) +{ +#ifdef USE_SSE2 + return _mm_set1_epi32(c); +#else + return ~UINT64CONST(0) / 0xFFFFFFFF * c; +#endif +} + /* * Functions for comparing vector elements to a given value. @@ -196,6 +223,21 @@ vector8_is_highbit_set(const Vector8 v) #endif } +/* + * vector32_any_lane_set() assumes that each lane in the given vector is set to + * either all ones or all zeroes. If this is not true, its behavior is + * undefined. + */ +#ifndef USE_NO_SIMD +static inline bool +vector32_any_lane_set(const Vector32 v) +{ +#ifdef USE_SSE2 + return _mm_movemask_epi8(v) != 0; +#endif +} +#endif + /* comparisons between vectors */ #ifndef USE_NO_SIMD @@ -206,6 +248,14 @@ vector8_eq(const Vector8 v1, const Vector8 v2) return _mm_cmpeq_epi8(v1, v2); #endif } + +static inline Vector32 +vector32_eq(const Vector32 v1, const Vector32 v2) +{ +#ifdef USE_SSE2 + return _mm_cmpeq_epi32(v1, v2); +#endif +} #endif /* bitwise operations */ @@ -220,4 +270,14 @@ vector8_or(const Vector8 v1, const Vector8 v2) #endif } +static inline Vector32 +vector32_or(const Vector32 v1, const Vector32 v2) +{ +#ifdef USE_SSE2 + return _mm_or_si128(v1, v2); +#else + return v1 | v2; +#endif +} + #endif /* SIMD_H */ -- 2.25.1 --Nq2Wo0NMKNjxTN9z Content-Type: text/x-diff; charset=us-ascii Content-Disposition: attachment; filename="v3-0002-use-ARM-Advanced-SIMD-intrinsic-functions-where-a.patch" ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
* [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump @ 2026-07-08 21:39 Nathan Bossart <nathan@postgresql.org> 0 siblings, 0 replies; 327+ messages in thread From: Nathan Bossart @ 2026-07-08 21:39 UTC (permalink / raw) --- .../perl/PostgreSQL/Test/AdjustUpgrade.pm | 207 +----------------- 1 file changed, 5 insertions(+), 202 deletions(-) diff --git a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm index 878fcc16a9e..04844298ab3 100644 --- a/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm +++ b/src/test/perl/PostgreSQL/Test/AdjustUpgrade.pm @@ -199,15 +199,10 @@ sub adjust_database_contents 'drop operator if exists #@%# (bigint,NONE)'); # get rid of dblink's dependencies on regress.so - my $regrdb = - $old_version le '9.4' - ? 'contrib_regression' - : 'contrib_regression_dblink'; - - if ($dbnames{$regrdb}) + if ($dbnames{'contrib_regression_dblink'}) { _add_st( - $result, $regrdb, + $result, 'contrib_regression_dblink', 'drop function if exists public.putenv(text)', 'drop function if exists public.wait_pid(integer)'); } @@ -250,7 +245,7 @@ sub adjust_database_contents } # this table had OIDs too, but we'll just drop it - if ($old_version >= 10 && $dbnames{'contrib_regression_postgres_fdw'}) + if ($dbnames{'contrib_regression_postgres_fdw'}) { _add_st( $result, @@ -276,43 +271,13 @@ sub adjust_database_contents 'drop function if exists public.funny_dup17()'); } - # version-0 C functions are no longer supported - if ($old_version < 10) - { - _add_st($result, 'regression', - 'drop function oldstyle_length(integer, text)'); - } - - if ($old_version lt '9.5') - { - # cope with changes of underlying functions - _add_st( - $result, - 'regression', - 'drop operator @#@ (NONE, bigint)', - 'CREATE OPERATOR @#@ (' - . 'PROCEDURE = factorial, RIGHTARG = bigint )', - 'drop aggregate public.array_cat_accum(anyarray)', - 'CREATE AGGREGATE array_larger_accum (anyarray) ' . ' ( ' - . ' sfunc = array_larger, ' - . ' stype = anyarray, ' - . ' initcond = $${}$$ ' . ' ) '); - - # "=>" is no longer valid as an operator name - _add_st($result, 'regression', - 'drop operator if exists public.=> (bigint, NONE)'); - } - # Version 19 changed the output format of pg_lsn. To avoid output # differences, set all pg_lsn columns to NULL if the old version is # older than 19. if ($old_version < 19) { - if ($old_version >= '9.5') - { - _add_st($result, 'regression', - "update brintest set lsncol = NULL"); - } + _add_st($result, 'regression', + "update brintest set lsncol = NULL"); if ($old_version >= 12) { @@ -426,107 +391,6 @@ sub adjust_old_dumpfile /$1 EXECUTE FUNCTION/mgx; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - if ($old_version lt '9.6') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = - "'New York'\tnew & york | big & apple | nyc\t'new' & 'york'\t"; - my $orig = "( 'new' & 'york' | 'big' & 'appl' ) | 'nyc'"; - my $repl = "'new' & 'york' | 'big' & 'appl' | 'nyc'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - - $prefix = - "'Sanct Peter'\tPeterburg | peter | 'Sanct Peterburg'\t'sanct' & 'peter'\t"; - $orig = "( 'peterburg' | 'peter' ) | 'sanct' & 'peterburg'"; - $repl = "'peterburg' | 'peter' | 'sanct' & 'peterburg'"; - $dump =~ s/(?<=^\Q$prefix\E)\Q$orig\E/$repl/mg; - } - - if ($old_version lt '9.5') - { - # adjust some places where we don't print so many parens anymore - - my $prefix = "CONSTRAINT (?:sequence|copy)_con CHECK [(][(]"; - my $orig = "((x > 3) AND (y <> 'check failed'::text))"; - my $repl = "(x > 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $prefix = "CONSTRAINT insert_con CHECK [(][(]"; - $orig = "((x >= 3) AND (y <> 'check failed'::text))"; - $repl = "(x >= 3) AND (y <> 'check failed'::text)"; - $dump =~ s/($prefix)\Q$orig\E/$1$repl/mg; - - $orig = "DEFAULT ((-1) * currval('public.insert_seq'::regclass))"; - $repl = - "DEFAULT ('-1'::integer * currval('public.insert_seq'::regclass))"; - $dump =~ s/\Q$orig\E/$repl/mg; - - my $expr = - "(rsl.sl_color = rsh.slcolor) AND (rsl.sl_len_cm >= rsh.slminlen_cm)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3.id3a = new.id3a) AND (rule_and_refint_t3.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - - $expr = - "(rule_and_refint_t3_1.id3a = new.id3a) AND (rule_and_refint_t3_1.id3b = new.id3b)"; - $dump =~ s/WHERE \(\(\Q$expr\E\)/WHERE ($expr/g; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - - # _mash_view_whitespace doesn't handle multi-command rules; - # rather than trying to fix that, just hack the exceptions manually. - - my $prefix = - "CREATE RULE rtest_sys_del AS ON DELETE TO public.rtest_system DO (DELETE FROM public.rtest_interface WHERE (rtest_interface.sysname = old.sysname);"; - my $line2 = " DELETE FROM public.rtest_admin"; - my $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - $prefix = - "CREATE RULE rtest_sys_upd AS ON UPDATE TO public.rtest_system DO (UPDATE public.rtest_interface SET sysname = new.sysname WHERE (rtest_interface.sysname = old.sysname);"; - $line2 = " UPDATE public.rtest_admin SET sysname = new.sysname"; - $line3 = " WHERE (rtest_admin.sysname = old.sysname);"; - $dump =~ - s/(?<=\Q$prefix\E)\Q$line2$line3\E \);/\n$line2\n $line3\n);/mg; - - # and there's one place where pre-9.3 uses a different table alias - $dump =~ s {^(CREATE\sRULE\srule_and_refint_t3_ins\sAS\s - ON\sINSERT\sTO\spublic\.rule_and_refint_t3\s - WHERE\s\(EXISTS\s\(SELECT\s1\sFROM\spublic\.rule_and_refint_t3)\s - (WHERE\s\(\(rule_and_refint_t3) - (\.id3a\s=\snew\.id3a\)\sAND\s\(rule_and_refint_t3) - (\.id3b\s=\snew\.id3b\)\sAND\s\(rule_and_refint_t3)} - {$1 rule_and_refint_t3_1 $2_1$3_1$4_1}mx; - - # Also fix old use of NATURAL JOIN syntax - $dump =~ s {NATURAL JOIN public\.credit_card r} - {JOIN public.credit_card r USING (cid)}mg; - $dump =~ s {NATURAL JOIN public\.credit_usage r} - {JOIN public.credit_usage r USING (cid)}mg; - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; @@ -661,37 +525,6 @@ sub _mash_view_qualifiers return $dump; } - -# Internal subroutine to mangle whitespace within view/rule commands. -# Any consecutive sequence of whitespace is reduced to one space. -sub _mash_view_whitespace -{ - my ($dump) = @_; - - foreach my $leader ('CREATE VIEW', 'CREATE RULE') - { - my @splitchunks = split $leader, $dump; - - $dump = shift(@splitchunks); - foreach my $chunk (@splitchunks) - { - my @thischunks = split /;/, $chunk, 2; - my $stmt = shift(@thischunks); - - # now $stmt is just the body of the CREATE VIEW/RULE - $stmt =~ s/\s+/ /sg; - # we also need to smash these forms for sub-selects and rules - $stmt =~ s/\( SELECT/(SELECT/g; - $stmt =~ s/\( INSERT/(INSERT/g; - $stmt =~ s/\( UPDATE/(UPDATE/g; - $stmt =~ s/\( DELETE/(DELETE/g; - - $dump .= $leader . $stmt . ';' . $thischunks[0]; - } - } - return $dump; -} - =pod =item adjust_new_dumpfile($old_version, $dump) @@ -779,36 +612,6 @@ sub adjust_new_dumpfile $dump =~ s/^SET default_table_access_method = heap;\n//mg; } - # During pg_upgrade, we reindex hash indexes if the source is pre-v10. - # This may change their tables' relallvisible values, so don't compare - # those. - if ($old_version < 10) - { - $dump =~ s/ - (^SELECT\s\*\sFROM\spg_catalog\.pg_restore_relation_stats\( - [^;]*'relation',\s'public\.hash_[a-z0-9]*_heap'::regclass, - [^;]*'relallvisible',)\s'\d+'::integer - /$1 ''::integer/mgx; - } - - # dumps from pre-9.6 dblink may include redundant ACL settings - if ($old_version lt '9.6') - { - my $comment = - "-- Name: FUNCTION dblink_connect_u\(.*?\); Type: ACL; Schema: public; Owner: .*"; - my $sql = - "REVOKE ALL ON FUNCTION public\.dblink_connect_u\(.*?\) FROM PUBLIC;"; - $dump =~ s/^--\n$comment\n--\n+$sql\n+//mg; - } - - if ($old_version lt '9.3') - { - # CREATE VIEW/RULE statements were not pretty-printed before 9.3. - # To cope, reduce all whitespace sequences within them to one space. - # This must be done on both old and new dumps. - $dump = _mash_view_whitespace($dump); - } - # Suppress blank lines, as some places in pg_dump emit more or fewer. $dump =~ s/\n\n+/\n/g; -- 2.50.1 (Apple Git-155) --WhtY6+QncUkBAPlR-- ^ permalink raw reply [nested|flat] 327+ messages in thread
end of thread, other threads:[~2026-07-08 21:39 UTC | newest] Thread overview: 327+ messages (download: mbox mbox.gz follow: Atom feed) -- links below jump to the message on this page -- 2022-08-26 05:18 [PATCH v3 1/2] abstract architecture-specific implementation details from pg_lfind32() Nathan Bossart <nathandbossart@gmail.com> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org> 2026-07-08 21:39 [PATCH v1 1/1] clean up AdjustUpgrade.pm after pg_upgrade min version bump Nathan Bossart <nathan@postgresql.org>
This inbox is served by agora; see mirroring instructions for how to clone and mirror all data and code used for this inbox