agora inbox for pgsql-hackers@postgresql.org  

help / color / mirror / Atom feed

[PATCH] In REFRESH MATERIALIZED VIEW, set user ID before running user code.
809+ messages / 2 participants
[nested] [flat]

* [PATCH] In REFRESH MATERIALIZED VIEW, set user ID before running user code.
@ 2022-05-09 15:35  Noah Misch <noah@leadboat.com>
  0 siblings, 0 replies; 809+ messages in thread

From: Noah Misch @ 2022-05-09 15:35 UTC (permalink / raw)

It intended to, but did not, achieve this.  Adopt the new standard of
setting user ID just after locking the relation.  Back-patch to v10 (all
supported versions).

Reviewed by Simon Riggs.  Reported by Alvaro Herrera.

Security: CVE-2022-1552
---
 src/backend/commands/matview.c           |   30 +++++++++++-------------------
 src/test/regress/expected/privileges.out |   15 +++++++++++++++
 src/test/regress/sql/privileges.sql      |   16 ++++++++++++++++
 3 files changed, 42 insertions(+), 19 deletions(-)

--- a/src/backend/commands/matview.c
+++ b/src/backend/commands/matview.c
@@ -164,6 +164,17 @@
 										  lockmode, false, false,
 										  RangeVarCallbackOwnsTable, NULL);
 	matviewRel = heap_open(matviewOid, NoLock);
+	relowner = matviewRel->rd_rel->relowner;
+
+	/*
+	 * Switch to the owner's userid, so that any functions are run as that
+	 * user.  Also lock down security-restricted operations and arrange to
+	 * make GUC variable changes local to this command.
+	 */
+	GetUserIdAndSecContext(&save_userid, &save_sec_context);
+	SetUserIdAndSecContext(relowner,
+						   save_sec_context | SECURITY_RESTRICTED_OPERATION);
+	save_nestlevel = NewGUCNestLevel();
 
 	/* Make sure it is a materialized view. */
 	if (matviewRel->rd_rel->relkind != RELKIND_MATVIEW)
@@ -269,19 +280,6 @@
 	 */
 	SetMatViewPopulatedState(matviewRel, !stmt->skipData);
 
-	relowner = matviewRel->rd_rel->relowner;
-
-	/*
-	 * Switch to the owner's userid, so that any functions are run as that
-	 * user.  Also arrange to make GUC variable changes local to this command.
-	 * Don't lock it down too tight to create a temporary table just yet.  We
-	 * will switch modes when we are about to execute user code.
-	 */
-	GetUserIdAndSecContext(&save_userid, &save_sec_context);
-	SetUserIdAndSecContext(relowner,
-						   save_sec_context | SECURITY_LOCAL_USERID_CHANGE);
-	save_nestlevel = NewGUCNestLevel();
-
 	/* Concurrent refresh builds new data in temp tablespace, and does diff. */
 	if (concurrent)
 	{
@@ -304,12 +302,6 @@
 	LockRelationOid(OIDNewHeap, AccessExclusiveLock);
 	dest = CreateTransientRelDestReceiver(OIDNewHeap);
 
-	/*
-	 * Now lock down security-restricted operations.
-	 */
-	SetUserIdAndSecContext(relowner,
-						   save_sec_context | SECURITY_RESTRICTED_OPERATION);
-
 	/* Generate the data, if wanted. */
 	if (!stmt->skipData)
 		refresh_matview_datafill(dest, dataQuery, queryString);
--- a/src/test/regress/expected/privileges.out
+++ b/src/test/regress/expected/privileges.out
@@ -1323,6 +1323,21 @@
 SQL statement "SELECT unwanted_grant()"
 PL/pgSQL function sro_trojan() line 1 at PERFORM
 SQL function "mv_action" statement 1
+-- REFRESH MATERIALIZED VIEW CONCURRENTLY use of eval_const_expressions()
+SET SESSION AUTHORIZATION regress_sro_user;
+CREATE FUNCTION unwanted_grant_nofail(int) RETURNS int
+	IMMUTABLE LANGUAGE plpgsql AS $$
+BEGIN
+	PERFORM unwanted_grant();
+	RAISE WARNING 'owned';
+	RETURN 1;
+EXCEPTION WHEN OTHERS THEN
+	RETURN 2;
+END$$;
+CREATE MATERIALIZED VIEW sro_index_mv AS SELECT 1 AS c;
+CREATE UNIQUE INDEX ON sro_index_mv (c) WHERE unwanted_grant_nofail(1) > 0;
+\c -
+REFRESH MATERIALIZED VIEW sro_index_mv;
 DROP OWNED BY regress_sro_user;
 DROP ROLE regress_sro_user;
 -- Admin options
--- a/src/test/regress/sql/privileges.sql
+++ b/src/test/regress/sql/privileges.sql
@@ -824,6 +824,22 @@
 REFRESH MATERIALIZED VIEW sro_mv;
 BEGIN; SET CONSTRAINTS ALL IMMEDIATE; REFRESH MATERIALIZED VIEW sro_mv; COMMIT;
 
+-- REFRESH MATERIALIZED VIEW CONCURRENTLY use of eval_const_expressions()
+SET SESSION AUTHORIZATION regress_sro_user;
+CREATE FUNCTION unwanted_grant_nofail(int) RETURNS int
+	IMMUTABLE LANGUAGE plpgsql AS $$
+BEGIN
+	PERFORM unwanted_grant();
+	RAISE WARNING 'owned';
+	RETURN 1;
+EXCEPTION WHEN OTHERS THEN
+	RETURN 2;
+END$$;
+CREATE MATERIALIZED VIEW sro_index_mv AS SELECT 1 AS c;
+CREATE UNIQUE INDEX ON sro_index_mv (c) WHERE unwanted_grant_nofail(1) > 0;
+\c -
+REFRESH MATERIALIZED VIEW sro_index_mv;
+
 DROP OWNED BY regress_sro_user;
 DROP ROLE regress_sro_user;
 

--Gfegn71+neI+QTr7
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="CVE-2022-1552_88b39e6148_adapted_for_9.6.patch"



^ permalink  raw  reply  [nested|flat] 809+ messages in thread

* [PATCH v3 3/3] Replace matview WITH OLD DATA
@ 2024-07-26 21:33  Erik Wienhold <ewie@ewie.name>
  0 siblings, 0 replies; 809+ messages in thread

From: Erik Wienhold @ 2024-07-26 21:33 UTC (permalink / raw)

---
 .../sgml/ref/create_materialized_view.sgml    | 16 +++++++++--
 src/backend/commands/createas.c               | 26 +++++++++++------
 src/backend/parser/gram.y                     | 16 +++++++++++
 src/include/nodes/primnodes.h                 |  1 +
 src/test/regress/expected/matview.out         | 28 +++++++++++++++++++
 src/test/regress/sql/matview.sql              | 15 ++++++++++
 6 files changed, 90 insertions(+), 12 deletions(-)

diff --git a/doc/src/sgml/ref/create_materialized_view.sgml b/doc/src/sgml/ref/create_materialized_view.sgml
index b5a8e3441a..65633b8bfa 100644
--- a/doc/src/sgml/ref/create_materialized_view.sgml
+++ b/doc/src/sgml/ref/create_materialized_view.sgml
@@ -27,7 +27,7 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
     [ WITH ( <replaceable class="parameter">storage_parameter</replaceable> [= <replaceable class="parameter">value</replaceable>] [, ... ] ) ]
     [ TABLESPACE <replaceable class="parameter">tablespace_name</replaceable> ]
     AS <replaceable>query</replaceable>
-    [ WITH [ NO ] DATA ]
+    [ WITH [ NO | OLD ] DATA ]
 </synopsis>
  </refsynopsisdiv>
 
@@ -37,7 +37,8 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
   <para>
    <command>CREATE MATERIALIZED VIEW</command> defines a materialized view of
    a query.  The query is executed and used to populate the view at the time
-   the command is issued (unless <command>WITH NO DATA</command> is used) and may be
+   the command is issued (unless <command>WITH NO DATA</command> or
+   <command>WITH OLD DATA</command> is used) and may be
    refreshed later using <command>REFRESH MATERIALIZED VIEW</command>.
   </para>
 
@@ -160,7 +161,7 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
    </varlistentry>
 
    <varlistentry>
-    <term><literal>WITH [ NO ] DATA</literal></term>
+    <term><literal>WITH [ NO | OLD ] DATA</literal></term>
     <listitem>
      <para>
       This clause specifies whether or not the materialized view should be
@@ -168,6 +169,15 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
       flagged as unscannable and cannot be queried until <command>REFRESH
       MATERIALIZED VIEW</command> is used.
      </para>
+
+     <para>
+      The form <command>WITH OLD DATA</command> keeps the already stored data
+      when replacing an existing materialized view to keep it populated.  For
+      newly created materialized views, this has the same effect as
+      <command>WITH DATA</command>.  Use this form if you want to use
+      <command>REFRESH MATERIALIZED VIEW CONCURRENTLY</command> as it requires
+      a populated materialized view.
+     </para>
     </listitem>
    </varlistentry>
 
diff --git a/src/backend/commands/createas.c b/src/backend/commands/createas.c
index e4ed3748f9..96e7b81966 100644
--- a/src/backend/commands/createas.c
+++ b/src/backend/commands/createas.c
@@ -331,18 +331,26 @@ ExecCreateTableAs(ParseState *pstate, CreateTableAsStmt *stmt,
 		/* An existing materialized view can be replaced. */
 		if (is_matview && into->replace)
 		{
-			RefreshMatViewStmt *refresh;
-
 			/* Change the relation to match the new query and other options. */
-			(void) create_ctas_nodata(query->targetList, into);
+			address = create_ctas_nodata(query->targetList, into);
 
-			/* Refresh the materialized view with a fake statement. */
-			refresh = makeNode(RefreshMatViewStmt);
-			refresh->relation = into->rel;
-			refresh->skipData = into->skipData;
-			refresh->concurrent = false;
+			/*
+			 * Refresh the materialized view with a fake statement unless we
+			 * must keep the old data.
+			 */
+			if (!into->keepData)
+			{
+				RefreshMatViewStmt *refresh;
+
+				refresh = makeNode(RefreshMatViewStmt);
+				refresh->relation = into->rel;
+				refresh->skipData = into->skipData;
+				refresh->concurrent = false;
+
+				address = ExecRefreshMatView(refresh, NULL, NULL);
+			}
 
-			return ExecRefreshMatView(refresh, NULL, NULL);
+			return address;
 		}
 
 		return InvalidObjectAddress;
diff --git a/src/backend/parser/gram.y b/src/backend/parser/gram.y
index 4b939ea7ca..e45ebb24f8 100644
--- a/src/backend/parser/gram.y
+++ b/src/backend/parser/gram.y
@@ -4808,6 +4808,22 @@ CreateMatViewStmt:
 					$7->replace = true;
 					$$ = (Node *) ctas;
 				}
+		| CREATE OR REPLACE OptNoLog MATERIALIZED VIEW create_mv_target AS SelectStmt WITH OLD DATA_P
+				{
+					CreateTableAsStmt *ctas = makeNode(CreateTableAsStmt);
+
+					ctas->query = $9;
+					ctas->into = $7;
+					ctas->objtype = OBJECT_MATVIEW;
+					ctas->is_select_into = false;
+					ctas->if_not_exists = false;
+					/* cram additional flags into the IntoClause */
+					$7->rel->relpersistence = $4;
+					$7->skipData = false;
+					$7->keepData = true;
+					$7->replace = true;
+					$$ = (Node *) ctas;
+				}
 		;
 
 create_mv_target:
diff --git a/src/include/nodes/primnodes.h b/src/include/nodes/primnodes.h
index 4b0ee5d10d..ae84cb522e 100644
--- a/src/include/nodes/primnodes.h
+++ b/src/include/nodes/primnodes.h
@@ -168,6 +168,7 @@ typedef struct IntoClause
 	/* materialized view's SELECT query */
 	Node	   *viewQuery pg_node_attr(query_jumble_ignore);
 	bool		skipData;		/* true for WITH NO DATA */
+	bool		keepData;		/* true for WITH OLD DATA */
 	bool		replace;		/* replace existing matview? */
 } IntoClause;
 
diff --git a/src/test/regress/expected/matview.out b/src/test/regress/expected/matview.out
index cefd0d442c..47dfd88bff 100644
--- a/src/test/regress/expected/matview.out
+++ b/src/test/regress/expected/matview.out
@@ -751,6 +751,23 @@ SELECT * FROM mvtest_replace;
  3
 (1 row)
 
+-- replace query but keep old data
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 5 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+ a 
+---
+ 3
+(1 row)
+
+REFRESH MATERIALIZED VIEW mvtest_replace;
+SELECT * FROM mvtest_replace;
+ a 
+---
+ 5
+(1 row)
+
 -- add column
 CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
   SELECT 4 AS a, 1 b;
@@ -905,3 +922,14 @@ ERROR:  syntax error at or near "NOT"
 LINE 1: CREATE OR REPLACE MATERIALIZED VIEW IF NOT EXISTS mvtest_rep...
                                                ^
 DROP MATERIALIZED VIEW mvtest_replace;
+-- Create new matview WITH OLD DATA.  This populates the new matview as if
+-- WITH DATA had been specified.
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 17 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+ a  
+----
+ 17
+(1 row)
+
diff --git a/src/test/regress/sql/matview.sql b/src/test/regress/sql/matview.sql
index c12f0243c9..b268237c24 100644
--- a/src/test/regress/sql/matview.sql
+++ b/src/test/regress/sql/matview.sql
@@ -338,6 +338,14 @@ SELECT * FROM mvtest_replace; -- error: not populated
 REFRESH MATERIALIZED VIEW mvtest_replace;
 SELECT * FROM mvtest_replace;
 
+-- replace query but keep old data
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 5 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+REFRESH MATERIALIZED VIEW mvtest_replace;
+SELECT * FROM mvtest_replace;
+
 -- add column
 CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
   SELECT 4 AS a, 1 b;
@@ -422,3 +430,10 @@ CREATE OR REPLACE MATERIALIZED VIEW IF NOT EXISTS mvtest_replace AS
   SELECT 1 AS a;
 
 DROP MATERIALIZED VIEW mvtest_replace;
+
+-- Create new matview WITH OLD DATA.  This populates the new matview as if
+-- WITH DATA had been specified.
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 17 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
-- 
2.46.0


--muysnh7l3kienazz--





^ permalink  raw  reply  [nested|flat] 809+ messages in thread

* [PATCH v4 3/3] Replace matview WITH OLD DATA
@ 2024-07-26 21:33  Erik Wienhold <ewie@ewie.name>
  0 siblings, 0 replies; 809+ messages in thread

From: Erik Wienhold @ 2024-07-26 21:33 UTC (permalink / raw)

---
 .../sgml/ref/create_materialized_view.sgml    | 16 +++++++++--
 src/backend/commands/createas.c               | 26 +++++++++++------
 src/backend/parser/gram.y                     | 16 +++++++++++
 src/include/nodes/primnodes.h                 |  1 +
 src/test/regress/expected/matview.out         | 28 +++++++++++++++++++
 src/test/regress/sql/matview.sql              | 15 ++++++++++
 6 files changed, 90 insertions(+), 12 deletions(-)

diff --git a/doc/src/sgml/ref/create_materialized_view.sgml b/doc/src/sgml/ref/create_materialized_view.sgml
index 5e03320eb7..1352e9de40 100644
--- a/doc/src/sgml/ref/create_materialized_view.sgml
+++ b/doc/src/sgml/ref/create_materialized_view.sgml
@@ -27,7 +27,7 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
     [ WITH ( <replaceable class="parameter">storage_parameter</replaceable> [= <replaceable class="parameter">value</replaceable>] [, ... ] ) ]
     [ TABLESPACE <replaceable class="parameter">tablespace_name</replaceable> ]
     AS <replaceable>query</replaceable>
-    [ WITH [ NO ] DATA ]
+    [ WITH [ NO | OLD ] DATA ]
 </synopsis>
  </refsynopsisdiv>
 
@@ -37,7 +37,8 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
   <para>
    <command>CREATE MATERIALIZED VIEW</command> defines a materialized view of
    a query.  The query is executed and used to populate the view at the time
-   the command is issued (unless <command>WITH NO DATA</command> is used) and may be
+   the command is issued (unless <command>WITH NO DATA</command> or
+   <command>WITH OLD DATA</command> is used) and may be
    refreshed later using <command>REFRESH MATERIALIZED VIEW</command>.
   </para>
 
@@ -162,7 +163,7 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
    </varlistentry>
 
    <varlistentry>
-    <term><literal>WITH [ NO ] DATA</literal></term>
+    <term><literal>WITH [ NO | OLD ] DATA</literal></term>
     <listitem>
      <para>
       This clause specifies whether or not the materialized view should be
@@ -170,6 +171,15 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
       flagged as unscannable and cannot be queried until <command>REFRESH
       MATERIALIZED VIEW</command> is used.
      </para>
+
+     <para>
+      The form <command>WITH OLD DATA</command> keeps the already stored data
+      when replacing an existing materialized view to keep it populated.  For
+      newly created materialized views, this has the same effect as
+      <command>WITH DATA</command>.  Use this form if you want to use
+      <command>REFRESH MATERIALIZED VIEW CONCURRENTLY</command> as it requires
+      a populated materialized view.
+     </para>
     </listitem>
    </varlistentry>
 
diff --git a/src/backend/commands/createas.c b/src/backend/commands/createas.c
index d4bc5e5c08..8db000554c 100644
--- a/src/backend/commands/createas.c
+++ b/src/backend/commands/createas.c
@@ -332,18 +332,26 @@ ExecCreateTableAs(ParseState *pstate, CreateTableAsStmt *stmt,
 		/* An existing materialized view can be replaced. */
 		if (is_matview && into->replace)
 		{
-			RefreshMatViewStmt *refresh;
-
 			/* Change the relation to match the new query and other options. */
-			(void) create_ctas_nodata(query->targetList, into);
+			address = create_ctas_nodata(query->targetList, into);
 
-			/* Refresh the materialized view with a fake statement. */
-			refresh = makeNode(RefreshMatViewStmt);
-			refresh->relation = into->rel;
-			refresh->skipData = into->skipData;
-			refresh->concurrent = false;
+			/*
+			 * Refresh the materialized view with a fake statement unless we
+			 * must keep the old data.
+			 */
+			if (!into->keepData)
+			{
+				RefreshMatViewStmt *refresh;
+
+				refresh = makeNode(RefreshMatViewStmt);
+				refresh->relation = into->rel;
+				refresh->skipData = into->skipData;
+				refresh->concurrent = false;
+
+				address = ExecRefreshMatView(refresh, NULL, NULL);
+			}
 
-			return ExecRefreshMatView(refresh, NULL, NULL);
+			return address;
 		}
 
 		return InvalidObjectAddress;
diff --git a/src/backend/parser/gram.y b/src/backend/parser/gram.y
index dadc6b630a..1be1a95cd9 100644
--- a/src/backend/parser/gram.y
+++ b/src/backend/parser/gram.y
@@ -4838,6 +4838,22 @@ CreateMatViewStmt:
 					$7->replace = true;
 					$$ = (Node *) ctas;
 				}
+		| CREATE OR REPLACE OptNoLog MATERIALIZED VIEW create_mv_target AS SelectStmt WITH OLD DATA_P
+				{
+					CreateTableAsStmt *ctas = makeNode(CreateTableAsStmt);
+
+					ctas->query = $9;
+					ctas->into = $7;
+					ctas->objtype = OBJECT_MATVIEW;
+					ctas->is_select_into = false;
+					ctas->if_not_exists = false;
+					/* cram additional flags into the IntoClause */
+					$7->rel->relpersistence = $4;
+					$7->skipData = false;
+					$7->keepData = true;
+					$7->replace = true;
+					$$ = (Node *) ctas;
+				}
 		;
 
 create_mv_target:
diff --git a/src/include/nodes/primnodes.h b/src/include/nodes/primnodes.h
index 533fa847ab..6fa3291c64 100644
--- a/src/include/nodes/primnodes.h
+++ b/src/include/nodes/primnodes.h
@@ -168,6 +168,7 @@ typedef struct IntoClause
 	/* materialized view's SELECT query */
 	struct Query *viewQuery pg_node_attr(query_jumble_ignore);
 	bool		skipData;		/* true for WITH NO DATA */
+	bool		keepData;		/* true for WITH OLD DATA */
 	bool		replace;		/* replace existing matview? */
 } IntoClause;
 
diff --git a/src/test/regress/expected/matview.out b/src/test/regress/expected/matview.out
index cefd0d442c..47dfd88bff 100644
--- a/src/test/regress/expected/matview.out
+++ b/src/test/regress/expected/matview.out
@@ -751,6 +751,23 @@ SELECT * FROM mvtest_replace;
  3
 (1 row)
 
+-- replace query but keep old data
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 5 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+ a 
+---
+ 3
+(1 row)
+
+REFRESH MATERIALIZED VIEW mvtest_replace;
+SELECT * FROM mvtest_replace;
+ a 
+---
+ 5
+(1 row)
+
 -- add column
 CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
   SELECT 4 AS a, 1 b;
@@ -905,3 +922,14 @@ ERROR:  syntax error at or near "NOT"
 LINE 1: CREATE OR REPLACE MATERIALIZED VIEW IF NOT EXISTS mvtest_rep...
                                                ^
 DROP MATERIALIZED VIEW mvtest_replace;
+-- Create new matview WITH OLD DATA.  This populates the new matview as if
+-- WITH DATA had been specified.
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 17 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+ a  
+----
+ 17
+(1 row)
+
diff --git a/src/test/regress/sql/matview.sql b/src/test/regress/sql/matview.sql
index c12f0243c9..b268237c24 100644
--- a/src/test/regress/sql/matview.sql
+++ b/src/test/regress/sql/matview.sql
@@ -338,6 +338,14 @@ SELECT * FROM mvtest_replace; -- error: not populated
 REFRESH MATERIALIZED VIEW mvtest_replace;
 SELECT * FROM mvtest_replace;
 
+-- replace query but keep old data
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 5 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+REFRESH MATERIALIZED VIEW mvtest_replace;
+SELECT * FROM mvtest_replace;
+
 -- add column
 CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
   SELECT 4 AS a, 1 b;
@@ -422,3 +430,10 @@ CREATE OR REPLACE MATERIALIZED VIEW IF NOT EXISTS mvtest_replace AS
   SELECT 1 AS a;
 
 DROP MATERIALIZED VIEW mvtest_replace;
+
+-- Create new matview WITH OLD DATA.  This populates the new matview as if
+-- WITH DATA had been specified.
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 17 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
-- 
2.47.0


--hht4bymbvbva5al5--





^ permalink  raw  reply  [nested|flat] 809+ messages in thread

* [PATCH v6 3/3] Replace matview WITH OLD DATA
@ 2024-07-26 21:33  Erik Wienhold <ewie@ewie.name>
  0 siblings, 0 replies; 809+ messages in thread

From: Erik Wienhold @ 2024-07-26 21:33 UTC (permalink / raw)

---
 .../sgml/ref/create_materialized_view.sgml    | 16 +++++++++--
 src/backend/commands/createas.c               | 26 +++++++++++------
 src/backend/parser/gram.y                     | 16 +++++++++++
 src/include/nodes/primnodes.h                 |  1 +
 src/test/regress/expected/matview.out         | 28 +++++++++++++++++++
 src/test/regress/sql/matview.sql              | 15 ++++++++++
 6 files changed, 90 insertions(+), 12 deletions(-)

diff --git a/doc/src/sgml/ref/create_materialized_view.sgml b/doc/src/sgml/ref/create_materialized_view.sgml
index 5e03320eb73..1352e9de409 100644
--- a/doc/src/sgml/ref/create_materialized_view.sgml
+++ b/doc/src/sgml/ref/create_materialized_view.sgml
@@ -27,7 +27,7 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
     [ WITH ( <replaceable class="parameter">storage_parameter</replaceable> [= <replaceable class="parameter">value</replaceable>] [, ... ] ) ]
     [ TABLESPACE <replaceable class="parameter">tablespace_name</replaceable> ]
     AS <replaceable>query</replaceable>
-    [ WITH [ NO ] DATA ]
+    [ WITH [ NO | OLD ] DATA ]
 </synopsis>
  </refsynopsisdiv>
 
@@ -37,7 +37,8 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
   <para>
    <command>CREATE MATERIALIZED VIEW</command> defines a materialized view of
    a query.  The query is executed and used to populate the view at the time
-   the command is issued (unless <command>WITH NO DATA</command> is used) and may be
+   the command is issued (unless <command>WITH NO DATA</command> or
+   <command>WITH OLD DATA</command> is used) and may be
    refreshed later using <command>REFRESH MATERIALIZED VIEW</command>.
   </para>
 
@@ -162,7 +163,7 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
    </varlistentry>
 
    <varlistentry>
-    <term><literal>WITH [ NO ] DATA</literal></term>
+    <term><literal>WITH [ NO | OLD ] DATA</literal></term>
     <listitem>
      <para>
       This clause specifies whether or not the materialized view should be
@@ -170,6 +171,15 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
       flagged as unscannable and cannot be queried until <command>REFRESH
       MATERIALIZED VIEW</command> is used.
      </para>
+
+     <para>
+      The form <command>WITH OLD DATA</command> keeps the already stored data
+      when replacing an existing materialized view to keep it populated.  For
+      newly created materialized views, this has the same effect as
+      <command>WITH DATA</command>.  Use this form if you want to use
+      <command>REFRESH MATERIALIZED VIEW CONCURRENTLY</command> as it requires
+      a populated materialized view.
+     </para>
     </listitem>
    </varlistentry>
 
diff --git a/src/backend/commands/createas.c b/src/backend/commands/createas.c
index 9f37ed7f177..0ed44b246bd 100644
--- a/src/backend/commands/createas.c
+++ b/src/backend/commands/createas.c
@@ -332,18 +332,26 @@ ExecCreateTableAs(ParseState *pstate, CreateTableAsStmt *stmt,
 		/* An existing materialized view can be replaced. */
 		if (is_matview && into->replace)
 		{
-			RefreshMatViewStmt *refresh;
-
 			/* Change the relation to match the new query and other options. */
-			(void) create_ctas_nodata(query->targetList, into);
+			address = create_ctas_nodata(query->targetList, into);
 
-			/* Refresh the materialized view with a fake statement. */
-			refresh = makeNode(RefreshMatViewStmt);
-			refresh->relation = into->rel;
-			refresh->skipData = into->skipData;
-			refresh->concurrent = false;
+			/*
+			 * Refresh the materialized view with a fake statement unless we
+			 * must keep the old data.
+			 */
+			if (!into->keepData)
+			{
+				RefreshMatViewStmt *refresh;
+
+				refresh = makeNode(RefreshMatViewStmt);
+				refresh->relation = into->rel;
+				refresh->skipData = into->skipData;
+				refresh->concurrent = false;
+
+				address = ExecRefreshMatView(refresh, pstate->p_sourcetext, qc);
+			}
 
-			return ExecRefreshMatView(refresh, pstate->p_sourcetext, qc);
+			return address;
 		}
 
 		return InvalidObjectAddress;
diff --git a/src/backend/parser/gram.y b/src/backend/parser/gram.y
index 8be790eaccf..e405268f413 100644
--- a/src/backend/parser/gram.y
+++ b/src/backend/parser/gram.y
@@ -4924,6 +4924,22 @@ CreateMatViewStmt:
 					$7->replace = true;
 					$$ = (Node *) ctas;
 				}
+		| CREATE OR REPLACE OptNoLog MATERIALIZED VIEW create_mv_target AS SelectStmt WITH OLD DATA_P
+				{
+					CreateTableAsStmt *ctas = makeNode(CreateTableAsStmt);
+
+					ctas->query = $9;
+					ctas->into = $7;
+					ctas->objtype = OBJECT_MATVIEW;
+					ctas->is_select_into = false;
+					ctas->if_not_exists = false;
+					/* cram additional flags into the IntoClause */
+					$7->rel->relpersistence = $4;
+					$7->skipData = false;
+					$7->keepData = true;
+					$7->replace = true;
+					$$ = (Node *) ctas;
+				}
 		;
 
 create_mv_target:
diff --git a/src/include/nodes/primnodes.h b/src/include/nodes/primnodes.h
index e800d13a6e0..5290e6c0e8a 100644
--- a/src/include/nodes/primnodes.h
+++ b/src/include/nodes/primnodes.h
@@ -169,6 +169,7 @@ typedef struct IntoClause
 	/* materialized view's SELECT query */
 	struct Query *viewQuery pg_node_attr(query_jumble_ignore);
 	bool		skipData;		/* true for WITH NO DATA */
+	bool		keepData;		/* true for WITH OLD DATA */
 	bool		replace;		/* replace existing matview? */
 } IntoClause;
 
diff --git a/src/test/regress/expected/matview.out b/src/test/regress/expected/matview.out
index d4b42da1ddf..f0f52dd1c6c 100644
--- a/src/test/regress/expected/matview.out
+++ b/src/test/regress/expected/matview.out
@@ -751,6 +751,23 @@ SELECT * FROM mvtest_replace;
  3
 (1 row)
 
+-- replace query but keep old data
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 5 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+ a 
+---
+ 3
+(1 row)
+
+REFRESH MATERIALIZED VIEW mvtest_replace;
+SELECT * FROM mvtest_replace;
+ a 
+---
+ 5
+(1 row)
+
 -- add column
 CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
   SELECT 4 AS a, 1 b;
@@ -905,3 +922,14 @@ ERROR:  syntax error at or near "NOT"
 LINE 1: CREATE OR REPLACE MATERIALIZED VIEW IF NOT EXISTS mvtest_rep...
                                                ^
 DROP MATERIALIZED VIEW mvtest_replace;
+-- Create new matview WITH OLD DATA.  This populates the new matview as if
+-- WITH DATA had been specified.
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 17 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+ a  
+----
+ 17
+(1 row)
+
diff --git a/src/test/regress/sql/matview.sql b/src/test/regress/sql/matview.sql
index d6a4dc4b857..91f547e9cb8 100644
--- a/src/test/regress/sql/matview.sql
+++ b/src/test/regress/sql/matview.sql
@@ -338,6 +338,14 @@ SELECT * FROM mvtest_replace; -- error: not populated
 REFRESH MATERIALIZED VIEW mvtest_replace;
 SELECT * FROM mvtest_replace;
 
+-- replace query but keep old data
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 5 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+REFRESH MATERIALIZED VIEW mvtest_replace;
+SELECT * FROM mvtest_replace;
+
 -- add column
 CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
   SELECT 4 AS a, 1 b;
@@ -422,3 +430,10 @@ CREATE OR REPLACE MATERIALIZED VIEW IF NOT EXISTS mvtest_replace AS
   SELECT 1 AS a;
 
 DROP MATERIALIZED VIEW mvtest_replace;
+
+-- Create new matview WITH OLD DATA.  This populates the new matview as if
+-- WITH DATA had been specified.
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 17 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
-- 
2.48.1


--aewcrbystcgftlni--





^ permalink  raw  reply  [nested|flat] 809+ messages in thread

* [PATCH v2 3/3] Replace matview WITH OLD DATA
@ 2024-07-26 21:33  Erik Wienhold <ewie@ewie.name>
  0 siblings, 0 replies; 809+ messages in thread

From: Erik Wienhold @ 2024-07-26 21:33 UTC (permalink / raw)

---
 .../sgml/ref/create_materialized_view.sgml    | 16 +++++++++--
 src/backend/commands/createas.c               | 26 +++++++++++------
 src/backend/parser/gram.y                     | 16 +++++++++++
 src/include/nodes/primnodes.h                 |  1 +
 src/test/regress/expected/matview.out         | 28 +++++++++++++++++++
 src/test/regress/sql/matview.sql              | 15 ++++++++++
 6 files changed, 90 insertions(+), 12 deletions(-)

diff --git a/doc/src/sgml/ref/create_materialized_view.sgml b/doc/src/sgml/ref/create_materialized_view.sgml
index b5a8e3441a..65633b8bfa 100644
--- a/doc/src/sgml/ref/create_materialized_view.sgml
+++ b/doc/src/sgml/ref/create_materialized_view.sgml
@@ -27,7 +27,7 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
     [ WITH ( <replaceable class="parameter">storage_parameter</replaceable> [= <replaceable class="parameter">value</replaceable>] [, ... ] ) ]
     [ TABLESPACE <replaceable class="parameter">tablespace_name</replaceable> ]
     AS <replaceable>query</replaceable>
-    [ WITH [ NO ] DATA ]
+    [ WITH [ NO | OLD ] DATA ]
 </synopsis>
  </refsynopsisdiv>
 
@@ -37,7 +37,8 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
   <para>
    <command>CREATE MATERIALIZED VIEW</command> defines a materialized view of
    a query.  The query is executed and used to populate the view at the time
-   the command is issued (unless <command>WITH NO DATA</command> is used) and may be
+   the command is issued (unless <command>WITH NO DATA</command> or
+   <command>WITH OLD DATA</command> is used) and may be
    refreshed later using <command>REFRESH MATERIALIZED VIEW</command>.
   </para>
 
@@ -160,7 +161,7 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
    </varlistentry>
 
    <varlistentry>
-    <term><literal>WITH [ NO ] DATA</literal></term>
+    <term><literal>WITH [ NO | OLD ] DATA</literal></term>
     <listitem>
      <para>
       This clause specifies whether or not the materialized view should be
@@ -168,6 +169,15 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
       flagged as unscannable and cannot be queried until <command>REFRESH
       MATERIALIZED VIEW</command> is used.
      </para>
+
+     <para>
+      The form <command>WITH OLD DATA</command> keeps the already stored data
+      when replacing an existing materialized view to keep it populated.  For
+      newly created materialized views, this has the same effect as
+      <command>WITH DATA</command>.  Use this form if you want to use
+      <command>REFRESH MATERIALIZED VIEW CONCURRENTLY</command> as it requires
+      a populated materialized view.
+     </para>
     </listitem>
    </varlistentry>
 
diff --git a/src/backend/commands/createas.c b/src/backend/commands/createas.c
index c5d78252a1..e2948ac966 100644
--- a/src/backend/commands/createas.c
+++ b/src/backend/commands/createas.c
@@ -334,18 +334,26 @@ ExecCreateTableAs(ParseState *pstate, CreateTableAsStmt *stmt,
 		/* An existing materialized view can be replaced. */
 		if (is_matview && into->replace)
 		{
-			RefreshMatViewStmt *refresh;
-
 			/* Change the relation to match the new query and other options. */
-			(void) create_ctas_nodata(query->targetList, into);
+			address = create_ctas_nodata(query->targetList, into);
 
-			/* Refresh the materialized view with a fake statement. */
-			refresh = makeNode(RefreshMatViewStmt);
-			refresh->relation = into->rel;
-			refresh->skipData = into->skipData;
-			refresh->concurrent = false;
+			/*
+			 * Refresh the materialized view with a fake statement unless we
+			 * must keep the old data.
+			 */
+			if (!into->keepData)
+			{
+				RefreshMatViewStmt *refresh;
+
+				refresh = makeNode(RefreshMatViewStmt);
+				refresh->relation = into->rel;
+				refresh->skipData = into->skipData;
+				refresh->concurrent = false;
+
+				address = ExecRefreshMatView(refresh, NULL, NULL, NULL);
+			}
 
-			return ExecRefreshMatView(refresh, NULL, NULL, NULL);
+			return address;
 		}
 
 		return InvalidObjectAddress;
diff --git a/src/backend/parser/gram.y b/src/backend/parser/gram.y
index b1100bdec1..0647955005 100644
--- a/src/backend/parser/gram.y
+++ b/src/backend/parser/gram.y
@@ -4860,6 +4860,22 @@ CreateMatViewStmt:
 					$7->replace = true;
 					$$ = (Node *) ctas;
 				}
+		| CREATE OR REPLACE OptNoLog MATERIALIZED VIEW create_mv_target AS SelectStmt WITH OLD DATA_P
+				{
+					CreateTableAsStmt *ctas = makeNode(CreateTableAsStmt);
+
+					ctas->query = $9;
+					ctas->into = $7;
+					ctas->objtype = OBJECT_MATVIEW;
+					ctas->is_select_into = false;
+					ctas->if_not_exists = false;
+					/* cram additional flags into the IntoClause */
+					$7->rel->relpersistence = $4;
+					$7->skipData = false;
+					$7->keepData = true;
+					$7->replace = true;
+					$$ = (Node *) ctas;
+				}
 		;
 
 create_mv_target:
diff --git a/src/include/nodes/primnodes.h b/src/include/nodes/primnodes.h
index 4b0ee5d10d..ae84cb522e 100644
--- a/src/include/nodes/primnodes.h
+++ b/src/include/nodes/primnodes.h
@@ -168,6 +168,7 @@ typedef struct IntoClause
 	/* materialized view's SELECT query */
 	Node	   *viewQuery pg_node_attr(query_jumble_ignore);
 	bool		skipData;		/* true for WITH NO DATA */
+	bool		keepData;		/* true for WITH OLD DATA */
 	bool		replace;		/* replace existing matview? */
 } IntoClause;
 
diff --git a/src/test/regress/expected/matview.out b/src/test/regress/expected/matview.out
index cefd0d442c..47dfd88bff 100644
--- a/src/test/regress/expected/matview.out
+++ b/src/test/regress/expected/matview.out
@@ -751,6 +751,23 @@ SELECT * FROM mvtest_replace;
  3
 (1 row)
 
+-- replace query but keep old data
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 5 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+ a 
+---
+ 3
+(1 row)
+
+REFRESH MATERIALIZED VIEW mvtest_replace;
+SELECT * FROM mvtest_replace;
+ a 
+---
+ 5
+(1 row)
+
 -- add column
 CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
   SELECT 4 AS a, 1 b;
@@ -905,3 +922,14 @@ ERROR:  syntax error at or near "NOT"
 LINE 1: CREATE OR REPLACE MATERIALIZED VIEW IF NOT EXISTS mvtest_rep...
                                                ^
 DROP MATERIALIZED VIEW mvtest_replace;
+-- Create new matview WITH OLD DATA.  This populates the new matview as if
+-- WITH DATA had been specified.
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 17 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+ a  
+----
+ 17
+(1 row)
+
diff --git a/src/test/regress/sql/matview.sql b/src/test/regress/sql/matview.sql
index c12f0243c9..b268237c24 100644
--- a/src/test/regress/sql/matview.sql
+++ b/src/test/regress/sql/matview.sql
@@ -338,6 +338,14 @@ SELECT * FROM mvtest_replace; -- error: not populated
 REFRESH MATERIALIZED VIEW mvtest_replace;
 SELECT * FROM mvtest_replace;
 
+-- replace query but keep old data
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 5 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+REFRESH MATERIALIZED VIEW mvtest_replace;
+SELECT * FROM mvtest_replace;
+
 -- add column
 CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
   SELECT 4 AS a, 1 b;
@@ -422,3 +430,10 @@ CREATE OR REPLACE MATERIALIZED VIEW IF NOT EXISTS mvtest_replace AS
   SELECT 1 AS a;
 
 DROP MATERIALIZED VIEW mvtest_replace;
+
+-- Create new matview WITH OLD DATA.  This populates the new matview as if
+-- WITH DATA had been specified.
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 17 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
-- 
2.45.2


--nrp556lrhtfteavd--





^ permalink  raw  reply  [nested|flat] 809+ messages in thread

* [PATCH v3 3/3] Replace matview WITH OLD DATA
@ 2024-07-26 21:33  Erik Wienhold <ewie@ewie.name>
  0 siblings, 0 replies; 809+ messages in thread

From: Erik Wienhold @ 2024-07-26 21:33 UTC (permalink / raw)

---
 .../sgml/ref/create_materialized_view.sgml    | 16 +++++++++--
 src/backend/commands/createas.c               | 26 +++++++++++------
 src/backend/parser/gram.y                     | 16 +++++++++++
 src/include/nodes/primnodes.h                 |  1 +
 src/test/regress/expected/matview.out         | 28 +++++++++++++++++++
 src/test/regress/sql/matview.sql              | 15 ++++++++++
 6 files changed, 90 insertions(+), 12 deletions(-)

diff --git a/doc/src/sgml/ref/create_materialized_view.sgml b/doc/src/sgml/ref/create_materialized_view.sgml
index b5a8e3441a..65633b8bfa 100644
--- a/doc/src/sgml/ref/create_materialized_view.sgml
+++ b/doc/src/sgml/ref/create_materialized_view.sgml
@@ -27,7 +27,7 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
     [ WITH ( <replaceable class="parameter">storage_parameter</replaceable> [= <replaceable class="parameter">value</replaceable>] [, ... ] ) ]
     [ TABLESPACE <replaceable class="parameter">tablespace_name</replaceable> ]
     AS <replaceable>query</replaceable>
-    [ WITH [ NO ] DATA ]
+    [ WITH [ NO | OLD ] DATA ]
 </synopsis>
  </refsynopsisdiv>
 
@@ -37,7 +37,8 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
   <para>
    <command>CREATE MATERIALIZED VIEW</command> defines a materialized view of
    a query.  The query is executed and used to populate the view at the time
-   the command is issued (unless <command>WITH NO DATA</command> is used) and may be
+   the command is issued (unless <command>WITH NO DATA</command> or
+   <command>WITH OLD DATA</command> is used) and may be
    refreshed later using <command>REFRESH MATERIALIZED VIEW</command>.
   </para>
 
@@ -160,7 +161,7 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
    </varlistentry>
 
    <varlistentry>
-    <term><literal>WITH [ NO ] DATA</literal></term>
+    <term><literal>WITH [ NO | OLD ] DATA</literal></term>
     <listitem>
      <para>
       This clause specifies whether or not the materialized view should be
@@ -168,6 +169,15 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
       flagged as unscannable and cannot be queried until <command>REFRESH
       MATERIALIZED VIEW</command> is used.
      </para>
+
+     <para>
+      The form <command>WITH OLD DATA</command> keeps the already stored data
+      when replacing an existing materialized view to keep it populated.  For
+      newly created materialized views, this has the same effect as
+      <command>WITH DATA</command>.  Use this form if you want to use
+      <command>REFRESH MATERIALIZED VIEW CONCURRENTLY</command> as it requires
+      a populated materialized view.
+     </para>
     </listitem>
    </varlistentry>
 
diff --git a/src/backend/commands/createas.c b/src/backend/commands/createas.c
index e4ed3748f9..96e7b81966 100644
--- a/src/backend/commands/createas.c
+++ b/src/backend/commands/createas.c
@@ -331,18 +331,26 @@ ExecCreateTableAs(ParseState *pstate, CreateTableAsStmt *stmt,
 		/* An existing materialized view can be replaced. */
 		if (is_matview && into->replace)
 		{
-			RefreshMatViewStmt *refresh;
-
 			/* Change the relation to match the new query and other options. */
-			(void) create_ctas_nodata(query->targetList, into);
+			address = create_ctas_nodata(query->targetList, into);
 
-			/* Refresh the materialized view with a fake statement. */
-			refresh = makeNode(RefreshMatViewStmt);
-			refresh->relation = into->rel;
-			refresh->skipData = into->skipData;
-			refresh->concurrent = false;
+			/*
+			 * Refresh the materialized view with a fake statement unless we
+			 * must keep the old data.
+			 */
+			if (!into->keepData)
+			{
+				RefreshMatViewStmt *refresh;
+
+				refresh = makeNode(RefreshMatViewStmt);
+				refresh->relation = into->rel;
+				refresh->skipData = into->skipData;
+				refresh->concurrent = false;
+
+				address = ExecRefreshMatView(refresh, NULL, NULL);
+			}
 
-			return ExecRefreshMatView(refresh, NULL, NULL);
+			return address;
 		}
 
 		return InvalidObjectAddress;
diff --git a/src/backend/parser/gram.y b/src/backend/parser/gram.y
index 4b939ea7ca..e45ebb24f8 100644
--- a/src/backend/parser/gram.y
+++ b/src/backend/parser/gram.y
@@ -4808,6 +4808,22 @@ CreateMatViewStmt:
 					$7->replace = true;
 					$$ = (Node *) ctas;
 				}
+		| CREATE OR REPLACE OptNoLog MATERIALIZED VIEW create_mv_target AS SelectStmt WITH OLD DATA_P
+				{
+					CreateTableAsStmt *ctas = makeNode(CreateTableAsStmt);
+
+					ctas->query = $9;
+					ctas->into = $7;
+					ctas->objtype = OBJECT_MATVIEW;
+					ctas->is_select_into = false;
+					ctas->if_not_exists = false;
+					/* cram additional flags into the IntoClause */
+					$7->rel->relpersistence = $4;
+					$7->skipData = false;
+					$7->keepData = true;
+					$7->replace = true;
+					$$ = (Node *) ctas;
+				}
 		;
 
 create_mv_target:
diff --git a/src/include/nodes/primnodes.h b/src/include/nodes/primnodes.h
index 4b0ee5d10d..ae84cb522e 100644
--- a/src/include/nodes/primnodes.h
+++ b/src/include/nodes/primnodes.h
@@ -168,6 +168,7 @@ typedef struct IntoClause
 	/* materialized view's SELECT query */
 	Node	   *viewQuery pg_node_attr(query_jumble_ignore);
 	bool		skipData;		/* true for WITH NO DATA */
+	bool		keepData;		/* true for WITH OLD DATA */
 	bool		replace;		/* replace existing matview? */
 } IntoClause;
 
diff --git a/src/test/regress/expected/matview.out b/src/test/regress/expected/matview.out
index cefd0d442c..47dfd88bff 100644
--- a/src/test/regress/expected/matview.out
+++ b/src/test/regress/expected/matview.out
@@ -751,6 +751,23 @@ SELECT * FROM mvtest_replace;
  3
 (1 row)
 
+-- replace query but keep old data
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 5 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+ a 
+---
+ 3
+(1 row)
+
+REFRESH MATERIALIZED VIEW mvtest_replace;
+SELECT * FROM mvtest_replace;
+ a 
+---
+ 5
+(1 row)
+
 -- add column
 CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
   SELECT 4 AS a, 1 b;
@@ -905,3 +922,14 @@ ERROR:  syntax error at or near "NOT"
 LINE 1: CREATE OR REPLACE MATERIALIZED VIEW IF NOT EXISTS mvtest_rep...
                                                ^
 DROP MATERIALIZED VIEW mvtest_replace;
+-- Create new matview WITH OLD DATA.  This populates the new matview as if
+-- WITH DATA had been specified.
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 17 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+ a  
+----
+ 17
+(1 row)
+
diff --git a/src/test/regress/sql/matview.sql b/src/test/regress/sql/matview.sql
index c12f0243c9..b268237c24 100644
--- a/src/test/regress/sql/matview.sql
+++ b/src/test/regress/sql/matview.sql
@@ -338,6 +338,14 @@ SELECT * FROM mvtest_replace; -- error: not populated
 REFRESH MATERIALIZED VIEW mvtest_replace;
 SELECT * FROM mvtest_replace;
 
+-- replace query but keep old data
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 5 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+REFRESH MATERIALIZED VIEW mvtest_replace;
+SELECT * FROM mvtest_replace;
+
 -- add column
 CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
   SELECT 4 AS a, 1 b;
@@ -422,3 +430,10 @@ CREATE OR REPLACE MATERIALIZED VIEW IF NOT EXISTS mvtest_replace AS
   SELECT 1 AS a;
 
 DROP MATERIALIZED VIEW mvtest_replace;
+
+-- Create new matview WITH OLD DATA.  This populates the new matview as if
+-- WITH DATA had been specified.
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 17 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
-- 
2.46.0


--muysnh7l3kienazz--





^ permalink  raw  reply  [nested|flat] 809+ messages in thread

* [PATCH v2 3/3] Replace matview WITH OLD DATA
@ 2024-07-26 21:33  Erik Wienhold <ewie@ewie.name>
  0 siblings, 0 replies; 809+ messages in thread

From: Erik Wienhold @ 2024-07-26 21:33 UTC (permalink / raw)

---
 .../sgml/ref/create_materialized_view.sgml    | 16 +++++++++--
 src/backend/commands/createas.c               | 26 +++++++++++------
 src/backend/parser/gram.y                     | 16 +++++++++++
 src/include/nodes/primnodes.h                 |  1 +
 src/test/regress/expected/matview.out         | 28 +++++++++++++++++++
 src/test/regress/sql/matview.sql              | 15 ++++++++++
 6 files changed, 90 insertions(+), 12 deletions(-)

diff --git a/doc/src/sgml/ref/create_materialized_view.sgml b/doc/src/sgml/ref/create_materialized_view.sgml
index b5a8e3441a..65633b8bfa 100644
--- a/doc/src/sgml/ref/create_materialized_view.sgml
+++ b/doc/src/sgml/ref/create_materialized_view.sgml
@@ -27,7 +27,7 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
     [ WITH ( <replaceable class="parameter">storage_parameter</replaceable> [= <replaceable class="parameter">value</replaceable>] [, ... ] ) ]
     [ TABLESPACE <replaceable class="parameter">tablespace_name</replaceable> ]
     AS <replaceable>query</replaceable>
-    [ WITH [ NO ] DATA ]
+    [ WITH [ NO | OLD ] DATA ]
 </synopsis>
  </refsynopsisdiv>
 
@@ -37,7 +37,8 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
   <para>
    <command>CREATE MATERIALIZED VIEW</command> defines a materialized view of
    a query.  The query is executed and used to populate the view at the time
-   the command is issued (unless <command>WITH NO DATA</command> is used) and may be
+   the command is issued (unless <command>WITH NO DATA</command> or
+   <command>WITH OLD DATA</command> is used) and may be
    refreshed later using <command>REFRESH MATERIALIZED VIEW</command>.
   </para>
 
@@ -160,7 +161,7 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
    </varlistentry>
 
    <varlistentry>
-    <term><literal>WITH [ NO ] DATA</literal></term>
+    <term><literal>WITH [ NO | OLD ] DATA</literal></term>
     <listitem>
      <para>
       This clause specifies whether or not the materialized view should be
@@ -168,6 +169,15 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
       flagged as unscannable and cannot be queried until <command>REFRESH
       MATERIALIZED VIEW</command> is used.
      </para>
+
+     <para>
+      The form <command>WITH OLD DATA</command> keeps the already stored data
+      when replacing an existing materialized view to keep it populated.  For
+      newly created materialized views, this has the same effect as
+      <command>WITH DATA</command>.  Use this form if you want to use
+      <command>REFRESH MATERIALIZED VIEW CONCURRENTLY</command> as it requires
+      a populated materialized view.
+     </para>
     </listitem>
    </varlistentry>
 
diff --git a/src/backend/commands/createas.c b/src/backend/commands/createas.c
index c5d78252a1..e2948ac966 100644
--- a/src/backend/commands/createas.c
+++ b/src/backend/commands/createas.c
@@ -334,18 +334,26 @@ ExecCreateTableAs(ParseState *pstate, CreateTableAsStmt *stmt,
 		/* An existing materialized view can be replaced. */
 		if (is_matview && into->replace)
 		{
-			RefreshMatViewStmt *refresh;
-
 			/* Change the relation to match the new query and other options. */
-			(void) create_ctas_nodata(query->targetList, into);
+			address = create_ctas_nodata(query->targetList, into);
 
-			/* Refresh the materialized view with a fake statement. */
-			refresh = makeNode(RefreshMatViewStmt);
-			refresh->relation = into->rel;
-			refresh->skipData = into->skipData;
-			refresh->concurrent = false;
+			/*
+			 * Refresh the materialized view with a fake statement unless we
+			 * must keep the old data.
+			 */
+			if (!into->keepData)
+			{
+				RefreshMatViewStmt *refresh;
+
+				refresh = makeNode(RefreshMatViewStmt);
+				refresh->relation = into->rel;
+				refresh->skipData = into->skipData;
+				refresh->concurrent = false;
+
+				address = ExecRefreshMatView(refresh, NULL, NULL, NULL);
+			}
 
-			return ExecRefreshMatView(refresh, NULL, NULL, NULL);
+			return address;
 		}
 
 		return InvalidObjectAddress;
diff --git a/src/backend/parser/gram.y b/src/backend/parser/gram.y
index b1100bdec1..0647955005 100644
--- a/src/backend/parser/gram.y
+++ b/src/backend/parser/gram.y
@@ -4860,6 +4860,22 @@ CreateMatViewStmt:
 					$7->replace = true;
 					$$ = (Node *) ctas;
 				}
+		| CREATE OR REPLACE OptNoLog MATERIALIZED VIEW create_mv_target AS SelectStmt WITH OLD DATA_P
+				{
+					CreateTableAsStmt *ctas = makeNode(CreateTableAsStmt);
+
+					ctas->query = $9;
+					ctas->into = $7;
+					ctas->objtype = OBJECT_MATVIEW;
+					ctas->is_select_into = false;
+					ctas->if_not_exists = false;
+					/* cram additional flags into the IntoClause */
+					$7->rel->relpersistence = $4;
+					$7->skipData = false;
+					$7->keepData = true;
+					$7->replace = true;
+					$$ = (Node *) ctas;
+				}
 		;
 
 create_mv_target:
diff --git a/src/include/nodes/primnodes.h b/src/include/nodes/primnodes.h
index 4b0ee5d10d..ae84cb522e 100644
--- a/src/include/nodes/primnodes.h
+++ b/src/include/nodes/primnodes.h
@@ -168,6 +168,7 @@ typedef struct IntoClause
 	/* materialized view's SELECT query */
 	Node	   *viewQuery pg_node_attr(query_jumble_ignore);
 	bool		skipData;		/* true for WITH NO DATA */
+	bool		keepData;		/* true for WITH OLD DATA */
 	bool		replace;		/* replace existing matview? */
 } IntoClause;
 
diff --git a/src/test/regress/expected/matview.out b/src/test/regress/expected/matview.out
index cefd0d442c..47dfd88bff 100644
--- a/src/test/regress/expected/matview.out
+++ b/src/test/regress/expected/matview.out
@@ -751,6 +751,23 @@ SELECT * FROM mvtest_replace;
  3
 (1 row)
 
+-- replace query but keep old data
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 5 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+ a 
+---
+ 3
+(1 row)
+
+REFRESH MATERIALIZED VIEW mvtest_replace;
+SELECT * FROM mvtest_replace;
+ a 
+---
+ 5
+(1 row)
+
 -- add column
 CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
   SELECT 4 AS a, 1 b;
@@ -905,3 +922,14 @@ ERROR:  syntax error at or near "NOT"
 LINE 1: CREATE OR REPLACE MATERIALIZED VIEW IF NOT EXISTS mvtest_rep...
                                                ^
 DROP MATERIALIZED VIEW mvtest_replace;
+-- Create new matview WITH OLD DATA.  This populates the new matview as if
+-- WITH DATA had been specified.
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 17 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+ a  
+----
+ 17
+(1 row)
+
diff --git a/src/test/regress/sql/matview.sql b/src/test/regress/sql/matview.sql
index c12f0243c9..b268237c24 100644
--- a/src/test/regress/sql/matview.sql
+++ b/src/test/regress/sql/matview.sql
@@ -338,6 +338,14 @@ SELECT * FROM mvtest_replace; -- error: not populated
 REFRESH MATERIALIZED VIEW mvtest_replace;
 SELECT * FROM mvtest_replace;
 
+-- replace query but keep old data
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 5 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+REFRESH MATERIALIZED VIEW mvtest_replace;
+SELECT * FROM mvtest_replace;
+
 -- add column
 CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
   SELECT 4 AS a, 1 b;
@@ -422,3 +430,10 @@ CREATE OR REPLACE MATERIALIZED VIEW IF NOT EXISTS mvtest_replace AS
   SELECT 1 AS a;
 
 DROP MATERIALIZED VIEW mvtest_replace;
+
+-- Create new matview WITH OLD DATA.  This populates the new matview as if
+-- WITH DATA had been specified.
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 17 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
-- 
2.45.2


--nrp556lrhtfteavd--





^ permalink  raw  reply  [nested|flat] 809+ messages in thread

* [PATCH v3 3/3] Replace matview WITH OLD DATA
@ 2024-07-26 21:33  Erik Wienhold <ewie@ewie.name>
  0 siblings, 0 replies; 809+ messages in thread

From: Erik Wienhold @ 2024-07-26 21:33 UTC (permalink / raw)

---
 .../sgml/ref/create_materialized_view.sgml    | 16 +++++++++--
 src/backend/commands/createas.c               | 26 +++++++++++------
 src/backend/parser/gram.y                     | 16 +++++++++++
 src/include/nodes/primnodes.h                 |  1 +
 src/test/regress/expected/matview.out         | 28 +++++++++++++++++++
 src/test/regress/sql/matview.sql              | 15 ++++++++++
 6 files changed, 90 insertions(+), 12 deletions(-)

diff --git a/doc/src/sgml/ref/create_materialized_view.sgml b/doc/src/sgml/ref/create_materialized_view.sgml
index b5a8e3441a..65633b8bfa 100644
--- a/doc/src/sgml/ref/create_materialized_view.sgml
+++ b/doc/src/sgml/ref/create_materialized_view.sgml
@@ -27,7 +27,7 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
     [ WITH ( <replaceable class="parameter">storage_parameter</replaceable> [= <replaceable class="parameter">value</replaceable>] [, ... ] ) ]
     [ TABLESPACE <replaceable class="parameter">tablespace_name</replaceable> ]
     AS <replaceable>query</replaceable>
-    [ WITH [ NO ] DATA ]
+    [ WITH [ NO | OLD ] DATA ]
 </synopsis>
  </refsynopsisdiv>
 
@@ -37,7 +37,8 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
   <para>
    <command>CREATE MATERIALIZED VIEW</command> defines a materialized view of
    a query.  The query is executed and used to populate the view at the time
-   the command is issued (unless <command>WITH NO DATA</command> is used) and may be
+   the command is issued (unless <command>WITH NO DATA</command> or
+   <command>WITH OLD DATA</command> is used) and may be
    refreshed later using <command>REFRESH MATERIALIZED VIEW</command>.
   </para>
 
@@ -160,7 +161,7 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
    </varlistentry>
 
    <varlistentry>
-    <term><literal>WITH [ NO ] DATA</literal></term>
+    <term><literal>WITH [ NO | OLD ] DATA</literal></term>
     <listitem>
      <para>
       This clause specifies whether or not the materialized view should be
@@ -168,6 +169,15 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
       flagged as unscannable and cannot be queried until <command>REFRESH
       MATERIALIZED VIEW</command> is used.
      </para>
+
+     <para>
+      The form <command>WITH OLD DATA</command> keeps the already stored data
+      when replacing an existing materialized view to keep it populated.  For
+      newly created materialized views, this has the same effect as
+      <command>WITH DATA</command>.  Use this form if you want to use
+      <command>REFRESH MATERIALIZED VIEW CONCURRENTLY</command> as it requires
+      a populated materialized view.
+     </para>
     </listitem>
    </varlistentry>
 
diff --git a/src/backend/commands/createas.c b/src/backend/commands/createas.c
index e4ed3748f9..96e7b81966 100644
--- a/src/backend/commands/createas.c
+++ b/src/backend/commands/createas.c
@@ -331,18 +331,26 @@ ExecCreateTableAs(ParseState *pstate, CreateTableAsStmt *stmt,
 		/* An existing materialized view can be replaced. */
 		if (is_matview && into->replace)
 		{
-			RefreshMatViewStmt *refresh;
-
 			/* Change the relation to match the new query and other options. */
-			(void) create_ctas_nodata(query->targetList, into);
+			address = create_ctas_nodata(query->targetList, into);
 
-			/* Refresh the materialized view with a fake statement. */
-			refresh = makeNode(RefreshMatViewStmt);
-			refresh->relation = into->rel;
-			refresh->skipData = into->skipData;
-			refresh->concurrent = false;
+			/*
+			 * Refresh the materialized view with a fake statement unless we
+			 * must keep the old data.
+			 */
+			if (!into->keepData)
+			{
+				RefreshMatViewStmt *refresh;
+
+				refresh = makeNode(RefreshMatViewStmt);
+				refresh->relation = into->rel;
+				refresh->skipData = into->skipData;
+				refresh->concurrent = false;
+
+				address = ExecRefreshMatView(refresh, NULL, NULL);
+			}
 
-			return ExecRefreshMatView(refresh, NULL, NULL);
+			return address;
 		}
 
 		return InvalidObjectAddress;
diff --git a/src/backend/parser/gram.y b/src/backend/parser/gram.y
index 4b939ea7ca..e45ebb24f8 100644
--- a/src/backend/parser/gram.y
+++ b/src/backend/parser/gram.y
@@ -4808,6 +4808,22 @@ CreateMatViewStmt:
 					$7->replace = true;
 					$$ = (Node *) ctas;
 				}
+		| CREATE OR REPLACE OptNoLog MATERIALIZED VIEW create_mv_target AS SelectStmt WITH OLD DATA_P
+				{
+					CreateTableAsStmt *ctas = makeNode(CreateTableAsStmt);
+
+					ctas->query = $9;
+					ctas->into = $7;
+					ctas->objtype = OBJECT_MATVIEW;
+					ctas->is_select_into = false;
+					ctas->if_not_exists = false;
+					/* cram additional flags into the IntoClause */
+					$7->rel->relpersistence = $4;
+					$7->skipData = false;
+					$7->keepData = true;
+					$7->replace = true;
+					$$ = (Node *) ctas;
+				}
 		;
 
 create_mv_target:
diff --git a/src/include/nodes/primnodes.h b/src/include/nodes/primnodes.h
index 4b0ee5d10d..ae84cb522e 100644
--- a/src/include/nodes/primnodes.h
+++ b/src/include/nodes/primnodes.h
@@ -168,6 +168,7 @@ typedef struct IntoClause
 	/* materialized view's SELECT query */
 	Node	   *viewQuery pg_node_attr(query_jumble_ignore);
 	bool		skipData;		/* true for WITH NO DATA */
+	bool		keepData;		/* true for WITH OLD DATA */
 	bool		replace;		/* replace existing matview? */
 } IntoClause;
 
diff --git a/src/test/regress/expected/matview.out b/src/test/regress/expected/matview.out
index cefd0d442c..47dfd88bff 100644
--- a/src/test/regress/expected/matview.out
+++ b/src/test/regress/expected/matview.out
@@ -751,6 +751,23 @@ SELECT * FROM mvtest_replace;
  3
 (1 row)
 
+-- replace query but keep old data
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 5 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+ a 
+---
+ 3
+(1 row)
+
+REFRESH MATERIALIZED VIEW mvtest_replace;
+SELECT * FROM mvtest_replace;
+ a 
+---
+ 5
+(1 row)
+
 -- add column
 CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
   SELECT 4 AS a, 1 b;
@@ -905,3 +922,14 @@ ERROR:  syntax error at or near "NOT"
 LINE 1: CREATE OR REPLACE MATERIALIZED VIEW IF NOT EXISTS mvtest_rep...
                                                ^
 DROP MATERIALIZED VIEW mvtest_replace;
+-- Create new matview WITH OLD DATA.  This populates the new matview as if
+-- WITH DATA had been specified.
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 17 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+ a  
+----
+ 17
+(1 row)
+
diff --git a/src/test/regress/sql/matview.sql b/src/test/regress/sql/matview.sql
index c12f0243c9..b268237c24 100644
--- a/src/test/regress/sql/matview.sql
+++ b/src/test/regress/sql/matview.sql
@@ -338,6 +338,14 @@ SELECT * FROM mvtest_replace; -- error: not populated
 REFRESH MATERIALIZED VIEW mvtest_replace;
 SELECT * FROM mvtest_replace;
 
+-- replace query but keep old data
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 5 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+REFRESH MATERIALIZED VIEW mvtest_replace;
+SELECT * FROM mvtest_replace;
+
 -- add column
 CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
   SELECT 4 AS a, 1 b;
@@ -422,3 +430,10 @@ CREATE OR REPLACE MATERIALIZED VIEW IF NOT EXISTS mvtest_replace AS
   SELECT 1 AS a;
 
 DROP MATERIALIZED VIEW mvtest_replace;
+
+-- Create new matview WITH OLD DATA.  This populates the new matview as if
+-- WITH DATA had been specified.
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 17 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
-- 
2.46.0


--muysnh7l3kienazz--





^ permalink  raw  reply  [nested|flat] 809+ messages in thread

* [PATCH v4 3/3] Replace matview WITH OLD DATA
@ 2024-07-26 21:33  Erik Wienhold <ewie@ewie.name>
  0 siblings, 0 replies; 809+ messages in thread

From: Erik Wienhold @ 2024-07-26 21:33 UTC (permalink / raw)

---
 .../sgml/ref/create_materialized_view.sgml    | 16 +++++++++--
 src/backend/commands/createas.c               | 26 +++++++++++------
 src/backend/parser/gram.y                     | 16 +++++++++++
 src/include/nodes/primnodes.h                 |  1 +
 src/test/regress/expected/matview.out         | 28 +++++++++++++++++++
 src/test/regress/sql/matview.sql              | 15 ++++++++++
 6 files changed, 90 insertions(+), 12 deletions(-)

diff --git a/doc/src/sgml/ref/create_materialized_view.sgml b/doc/src/sgml/ref/create_materialized_view.sgml
index 5e03320eb7..1352e9de40 100644
--- a/doc/src/sgml/ref/create_materialized_view.sgml
+++ b/doc/src/sgml/ref/create_materialized_view.sgml
@@ -27,7 +27,7 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
     [ WITH ( <replaceable class="parameter">storage_parameter</replaceable> [= <replaceable class="parameter">value</replaceable>] [, ... ] ) ]
     [ TABLESPACE <replaceable class="parameter">tablespace_name</replaceable> ]
     AS <replaceable>query</replaceable>
-    [ WITH [ NO ] DATA ]
+    [ WITH [ NO | OLD ] DATA ]
 </synopsis>
  </refsynopsisdiv>
 
@@ -37,7 +37,8 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
   <para>
    <command>CREATE MATERIALIZED VIEW</command> defines a materialized view of
    a query.  The query is executed and used to populate the view at the time
-   the command is issued (unless <command>WITH NO DATA</command> is used) and may be
+   the command is issued (unless <command>WITH NO DATA</command> or
+   <command>WITH OLD DATA</command> is used) and may be
    refreshed later using <command>REFRESH MATERIALIZED VIEW</command>.
   </para>
 
@@ -162,7 +163,7 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
    </varlistentry>
 
    <varlistentry>
-    <term><literal>WITH [ NO ] DATA</literal></term>
+    <term><literal>WITH [ NO | OLD ] DATA</literal></term>
     <listitem>
      <para>
       This clause specifies whether or not the materialized view should be
@@ -170,6 +171,15 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
       flagged as unscannable and cannot be queried until <command>REFRESH
       MATERIALIZED VIEW</command> is used.
      </para>
+
+     <para>
+      The form <command>WITH OLD DATA</command> keeps the already stored data
+      when replacing an existing materialized view to keep it populated.  For
+      newly created materialized views, this has the same effect as
+      <command>WITH DATA</command>.  Use this form if you want to use
+      <command>REFRESH MATERIALIZED VIEW CONCURRENTLY</command> as it requires
+      a populated materialized view.
+     </para>
     </listitem>
    </varlistentry>
 
diff --git a/src/backend/commands/createas.c b/src/backend/commands/createas.c
index d4bc5e5c08..8db000554c 100644
--- a/src/backend/commands/createas.c
+++ b/src/backend/commands/createas.c
@@ -332,18 +332,26 @@ ExecCreateTableAs(ParseState *pstate, CreateTableAsStmt *stmt,
 		/* An existing materialized view can be replaced. */
 		if (is_matview && into->replace)
 		{
-			RefreshMatViewStmt *refresh;
-
 			/* Change the relation to match the new query and other options. */
-			(void) create_ctas_nodata(query->targetList, into);
+			address = create_ctas_nodata(query->targetList, into);
 
-			/* Refresh the materialized view with a fake statement. */
-			refresh = makeNode(RefreshMatViewStmt);
-			refresh->relation = into->rel;
-			refresh->skipData = into->skipData;
-			refresh->concurrent = false;
+			/*
+			 * Refresh the materialized view with a fake statement unless we
+			 * must keep the old data.
+			 */
+			if (!into->keepData)
+			{
+				RefreshMatViewStmt *refresh;
+
+				refresh = makeNode(RefreshMatViewStmt);
+				refresh->relation = into->rel;
+				refresh->skipData = into->skipData;
+				refresh->concurrent = false;
+
+				address = ExecRefreshMatView(refresh, NULL, NULL);
+			}
 
-			return ExecRefreshMatView(refresh, NULL, NULL);
+			return address;
 		}
 
 		return InvalidObjectAddress;
diff --git a/src/backend/parser/gram.y b/src/backend/parser/gram.y
index dadc6b630a..1be1a95cd9 100644
--- a/src/backend/parser/gram.y
+++ b/src/backend/parser/gram.y
@@ -4838,6 +4838,22 @@ CreateMatViewStmt:
 					$7->replace = true;
 					$$ = (Node *) ctas;
 				}
+		| CREATE OR REPLACE OptNoLog MATERIALIZED VIEW create_mv_target AS SelectStmt WITH OLD DATA_P
+				{
+					CreateTableAsStmt *ctas = makeNode(CreateTableAsStmt);
+
+					ctas->query = $9;
+					ctas->into = $7;
+					ctas->objtype = OBJECT_MATVIEW;
+					ctas->is_select_into = false;
+					ctas->if_not_exists = false;
+					/* cram additional flags into the IntoClause */
+					$7->rel->relpersistence = $4;
+					$7->skipData = false;
+					$7->keepData = true;
+					$7->replace = true;
+					$$ = (Node *) ctas;
+				}
 		;
 
 create_mv_target:
diff --git a/src/include/nodes/primnodes.h b/src/include/nodes/primnodes.h
index 533fa847ab..6fa3291c64 100644
--- a/src/include/nodes/primnodes.h
+++ b/src/include/nodes/primnodes.h
@@ -168,6 +168,7 @@ typedef struct IntoClause
 	/* materialized view's SELECT query */
 	struct Query *viewQuery pg_node_attr(query_jumble_ignore);
 	bool		skipData;		/* true for WITH NO DATA */
+	bool		keepData;		/* true for WITH OLD DATA */
 	bool		replace;		/* replace existing matview? */
 } IntoClause;
 
diff --git a/src/test/regress/expected/matview.out b/src/test/regress/expected/matview.out
index cefd0d442c..47dfd88bff 100644
--- a/src/test/regress/expected/matview.out
+++ b/src/test/regress/expected/matview.out
@@ -751,6 +751,23 @@ SELECT * FROM mvtest_replace;
  3
 (1 row)
 
+-- replace query but keep old data
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 5 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+ a 
+---
+ 3
+(1 row)
+
+REFRESH MATERIALIZED VIEW mvtest_replace;
+SELECT * FROM mvtest_replace;
+ a 
+---
+ 5
+(1 row)
+
 -- add column
 CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
   SELECT 4 AS a, 1 b;
@@ -905,3 +922,14 @@ ERROR:  syntax error at or near "NOT"
 LINE 1: CREATE OR REPLACE MATERIALIZED VIEW IF NOT EXISTS mvtest_rep...
                                                ^
 DROP MATERIALIZED VIEW mvtest_replace;
+-- Create new matview WITH OLD DATA.  This populates the new matview as if
+-- WITH DATA had been specified.
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 17 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+ a  
+----
+ 17
+(1 row)
+
diff --git a/src/test/regress/sql/matview.sql b/src/test/regress/sql/matview.sql
index c12f0243c9..b268237c24 100644
--- a/src/test/regress/sql/matview.sql
+++ b/src/test/regress/sql/matview.sql
@@ -338,6 +338,14 @@ SELECT * FROM mvtest_replace; -- error: not populated
 REFRESH MATERIALIZED VIEW mvtest_replace;
 SELECT * FROM mvtest_replace;
 
+-- replace query but keep old data
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 5 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+REFRESH MATERIALIZED VIEW mvtest_replace;
+SELECT * FROM mvtest_replace;
+
 -- add column
 CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
   SELECT 4 AS a, 1 b;
@@ -422,3 +430,10 @@ CREATE OR REPLACE MATERIALIZED VIEW IF NOT EXISTS mvtest_replace AS
   SELECT 1 AS a;
 
 DROP MATERIALIZED VIEW mvtest_replace;
+
+-- Create new matview WITH OLD DATA.  This populates the new matview as if
+-- WITH DATA had been specified.
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 17 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
-- 
2.47.0


--hht4bymbvbva5al5--





^ permalink  raw  reply  [nested|flat] 809+ messages in thread

* [PATCH v6 3/3] Replace matview WITH OLD DATA
@ 2024-07-26 21:33  Erik Wienhold <ewie@ewie.name>
  0 siblings, 0 replies; 809+ messages in thread

From: Erik Wienhold @ 2024-07-26 21:33 UTC (permalink / raw)

---
 .../sgml/ref/create_materialized_view.sgml    | 16 +++++++++--
 src/backend/commands/createas.c               | 26 +++++++++++------
 src/backend/parser/gram.y                     | 16 +++++++++++
 src/include/nodes/primnodes.h                 |  1 +
 src/test/regress/expected/matview.out         | 28 +++++++++++++++++++
 src/test/regress/sql/matview.sql              | 15 ++++++++++
 6 files changed, 90 insertions(+), 12 deletions(-)

diff --git a/doc/src/sgml/ref/create_materialized_view.sgml b/doc/src/sgml/ref/create_materialized_view.sgml
index 5e03320eb73..1352e9de409 100644
--- a/doc/src/sgml/ref/create_materialized_view.sgml
+++ b/doc/src/sgml/ref/create_materialized_view.sgml
@@ -27,7 +27,7 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
     [ WITH ( <replaceable class="parameter">storage_parameter</replaceable> [= <replaceable class="parameter">value</replaceable>] [, ... ] ) ]
     [ TABLESPACE <replaceable class="parameter">tablespace_name</replaceable> ]
     AS <replaceable>query</replaceable>
-    [ WITH [ NO ] DATA ]
+    [ WITH [ NO | OLD ] DATA ]
 </synopsis>
  </refsynopsisdiv>
 
@@ -37,7 +37,8 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
   <para>
    <command>CREATE MATERIALIZED VIEW</command> defines a materialized view of
    a query.  The query is executed and used to populate the view at the time
-   the command is issued (unless <command>WITH NO DATA</command> is used) and may be
+   the command is issued (unless <command>WITH NO DATA</command> or
+   <command>WITH OLD DATA</command> is used) and may be
    refreshed later using <command>REFRESH MATERIALIZED VIEW</command>.
   </para>
 
@@ -162,7 +163,7 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
    </varlistentry>
 
    <varlistentry>
-    <term><literal>WITH [ NO ] DATA</literal></term>
+    <term><literal>WITH [ NO | OLD ] DATA</literal></term>
     <listitem>
      <para>
       This clause specifies whether or not the materialized view should be
@@ -170,6 +171,15 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
       flagged as unscannable and cannot be queried until <command>REFRESH
       MATERIALIZED VIEW</command> is used.
      </para>
+
+     <para>
+      The form <command>WITH OLD DATA</command> keeps the already stored data
+      when replacing an existing materialized view to keep it populated.  For
+      newly created materialized views, this has the same effect as
+      <command>WITH DATA</command>.  Use this form if you want to use
+      <command>REFRESH MATERIALIZED VIEW CONCURRENTLY</command> as it requires
+      a populated materialized view.
+     </para>
     </listitem>
    </varlistentry>
 
diff --git a/src/backend/commands/createas.c b/src/backend/commands/createas.c
index 9f37ed7f177..0ed44b246bd 100644
--- a/src/backend/commands/createas.c
+++ b/src/backend/commands/createas.c
@@ -332,18 +332,26 @@ ExecCreateTableAs(ParseState *pstate, CreateTableAsStmt *stmt,
 		/* An existing materialized view can be replaced. */
 		if (is_matview && into->replace)
 		{
-			RefreshMatViewStmt *refresh;
-
 			/* Change the relation to match the new query and other options. */
-			(void) create_ctas_nodata(query->targetList, into);
+			address = create_ctas_nodata(query->targetList, into);
 
-			/* Refresh the materialized view with a fake statement. */
-			refresh = makeNode(RefreshMatViewStmt);
-			refresh->relation = into->rel;
-			refresh->skipData = into->skipData;
-			refresh->concurrent = false;
+			/*
+			 * Refresh the materialized view with a fake statement unless we
+			 * must keep the old data.
+			 */
+			if (!into->keepData)
+			{
+				RefreshMatViewStmt *refresh;
+
+				refresh = makeNode(RefreshMatViewStmt);
+				refresh->relation = into->rel;
+				refresh->skipData = into->skipData;
+				refresh->concurrent = false;
+
+				address = ExecRefreshMatView(refresh, pstate->p_sourcetext, qc);
+			}
 
-			return ExecRefreshMatView(refresh, pstate->p_sourcetext, qc);
+			return address;
 		}
 
 		return InvalidObjectAddress;
diff --git a/src/backend/parser/gram.y b/src/backend/parser/gram.y
index 8be790eaccf..e405268f413 100644
--- a/src/backend/parser/gram.y
+++ b/src/backend/parser/gram.y
@@ -4924,6 +4924,22 @@ CreateMatViewStmt:
 					$7->replace = true;
 					$$ = (Node *) ctas;
 				}
+		| CREATE OR REPLACE OptNoLog MATERIALIZED VIEW create_mv_target AS SelectStmt WITH OLD DATA_P
+				{
+					CreateTableAsStmt *ctas = makeNode(CreateTableAsStmt);
+
+					ctas->query = $9;
+					ctas->into = $7;
+					ctas->objtype = OBJECT_MATVIEW;
+					ctas->is_select_into = false;
+					ctas->if_not_exists = false;
+					/* cram additional flags into the IntoClause */
+					$7->rel->relpersistence = $4;
+					$7->skipData = false;
+					$7->keepData = true;
+					$7->replace = true;
+					$$ = (Node *) ctas;
+				}
 		;
 
 create_mv_target:
diff --git a/src/include/nodes/primnodes.h b/src/include/nodes/primnodes.h
index e800d13a6e0..5290e6c0e8a 100644
--- a/src/include/nodes/primnodes.h
+++ b/src/include/nodes/primnodes.h
@@ -169,6 +169,7 @@ typedef struct IntoClause
 	/* materialized view's SELECT query */
 	struct Query *viewQuery pg_node_attr(query_jumble_ignore);
 	bool		skipData;		/* true for WITH NO DATA */
+	bool		keepData;		/* true for WITH OLD DATA */
 	bool		replace;		/* replace existing matview? */
 } IntoClause;
 
diff --git a/src/test/regress/expected/matview.out b/src/test/regress/expected/matview.out
index d4b42da1ddf..f0f52dd1c6c 100644
--- a/src/test/regress/expected/matview.out
+++ b/src/test/regress/expected/matview.out
@@ -751,6 +751,23 @@ SELECT * FROM mvtest_replace;
  3
 (1 row)
 
+-- replace query but keep old data
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 5 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+ a 
+---
+ 3
+(1 row)
+
+REFRESH MATERIALIZED VIEW mvtest_replace;
+SELECT * FROM mvtest_replace;
+ a 
+---
+ 5
+(1 row)
+
 -- add column
 CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
   SELECT 4 AS a, 1 b;
@@ -905,3 +922,14 @@ ERROR:  syntax error at or near "NOT"
 LINE 1: CREATE OR REPLACE MATERIALIZED VIEW IF NOT EXISTS mvtest_rep...
                                                ^
 DROP MATERIALIZED VIEW mvtest_replace;
+-- Create new matview WITH OLD DATA.  This populates the new matview as if
+-- WITH DATA had been specified.
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 17 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+ a  
+----
+ 17
+(1 row)
+
diff --git a/src/test/regress/sql/matview.sql b/src/test/regress/sql/matview.sql
index d6a4dc4b857..91f547e9cb8 100644
--- a/src/test/regress/sql/matview.sql
+++ b/src/test/regress/sql/matview.sql
@@ -338,6 +338,14 @@ SELECT * FROM mvtest_replace; -- error: not populated
 REFRESH MATERIALIZED VIEW mvtest_replace;
 SELECT * FROM mvtest_replace;
 
+-- replace query but keep old data
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 5 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+REFRESH MATERIALIZED VIEW mvtest_replace;
+SELECT * FROM mvtest_replace;
+
 -- add column
 CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
   SELECT 4 AS a, 1 b;
@@ -422,3 +430,10 @@ CREATE OR REPLACE MATERIALIZED VIEW IF NOT EXISTS mvtest_replace AS
   SELECT 1 AS a;
 
 DROP MATERIALIZED VIEW mvtest_replace;
+
+-- Create new matview WITH OLD DATA.  This populates the new matview as if
+-- WITH DATA had been specified.
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 17 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
-- 
2.48.1


--aewcrbystcgftlni--





^ permalink  raw  reply  [nested|flat] 809+ messages in thread

* [PATCH v2 3/3] Replace matview WITH OLD DATA
@ 2024-07-26 21:33  Erik Wienhold <ewie@ewie.name>
  0 siblings, 0 replies; 809+ messages in thread

From: Erik Wienhold @ 2024-07-26 21:33 UTC (permalink / raw)

---
 .../sgml/ref/create_materialized_view.sgml    | 16 +++++++++--
 src/backend/commands/createas.c               | 26 +++++++++++------
 src/backend/parser/gram.y                     | 16 +++++++++++
 src/include/nodes/primnodes.h                 |  1 +
 src/test/regress/expected/matview.out         | 28 +++++++++++++++++++
 src/test/regress/sql/matview.sql              | 15 ++++++++++
 6 files changed, 90 insertions(+), 12 deletions(-)

diff --git a/doc/src/sgml/ref/create_materialized_view.sgml b/doc/src/sgml/ref/create_materialized_view.sgml
index b5a8e3441a..65633b8bfa 100644
--- a/doc/src/sgml/ref/create_materialized_view.sgml
+++ b/doc/src/sgml/ref/create_materialized_view.sgml
@@ -27,7 +27,7 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
     [ WITH ( <replaceable class="parameter">storage_parameter</replaceable> [= <replaceable class="parameter">value</replaceable>] [, ... ] ) ]
     [ TABLESPACE <replaceable class="parameter">tablespace_name</replaceable> ]
     AS <replaceable>query</replaceable>
-    [ WITH [ NO ] DATA ]
+    [ WITH [ NO | OLD ] DATA ]
 </synopsis>
  </refsynopsisdiv>
 
@@ -37,7 +37,8 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
   <para>
    <command>CREATE MATERIALIZED VIEW</command> defines a materialized view of
    a query.  The query is executed and used to populate the view at the time
-   the command is issued (unless <command>WITH NO DATA</command> is used) and may be
+   the command is issued (unless <command>WITH NO DATA</command> or
+   <command>WITH OLD DATA</command> is used) and may be
    refreshed later using <command>REFRESH MATERIALIZED VIEW</command>.
   </para>
 
@@ -160,7 +161,7 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
    </varlistentry>
 
    <varlistentry>
-    <term><literal>WITH [ NO ] DATA</literal></term>
+    <term><literal>WITH [ NO | OLD ] DATA</literal></term>
     <listitem>
      <para>
       This clause specifies whether or not the materialized view should be
@@ -168,6 +169,15 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
       flagged as unscannable and cannot be queried until <command>REFRESH
       MATERIALIZED VIEW</command> is used.
      </para>
+
+     <para>
+      The form <command>WITH OLD DATA</command> keeps the already stored data
+      when replacing an existing materialized view to keep it populated.  For
+      newly created materialized views, this has the same effect as
+      <command>WITH DATA</command>.  Use this form if you want to use
+      <command>REFRESH MATERIALIZED VIEW CONCURRENTLY</command> as it requires
+      a populated materialized view.
+     </para>
     </listitem>
    </varlistentry>
 
diff --git a/src/backend/commands/createas.c b/src/backend/commands/createas.c
index c5d78252a1..e2948ac966 100644
--- a/src/backend/commands/createas.c
+++ b/src/backend/commands/createas.c
@@ -334,18 +334,26 @@ ExecCreateTableAs(ParseState *pstate, CreateTableAsStmt *stmt,
 		/* An existing materialized view can be replaced. */
 		if (is_matview && into->replace)
 		{
-			RefreshMatViewStmt *refresh;
-
 			/* Change the relation to match the new query and other options. */
-			(void) create_ctas_nodata(query->targetList, into);
+			address = create_ctas_nodata(query->targetList, into);
 
-			/* Refresh the materialized view with a fake statement. */
-			refresh = makeNode(RefreshMatViewStmt);
-			refresh->relation = into->rel;
-			refresh->skipData = into->skipData;
-			refresh->concurrent = false;
+			/*
+			 * Refresh the materialized view with a fake statement unless we
+			 * must keep the old data.
+			 */
+			if (!into->keepData)
+			{
+				RefreshMatViewStmt *refresh;
+
+				refresh = makeNode(RefreshMatViewStmt);
+				refresh->relation = into->rel;
+				refresh->skipData = into->skipData;
+				refresh->concurrent = false;
+
+				address = ExecRefreshMatView(refresh, NULL, NULL, NULL);
+			}
 
-			return ExecRefreshMatView(refresh, NULL, NULL, NULL);
+			return address;
 		}
 
 		return InvalidObjectAddress;
diff --git a/src/backend/parser/gram.y b/src/backend/parser/gram.y
index b1100bdec1..0647955005 100644
--- a/src/backend/parser/gram.y
+++ b/src/backend/parser/gram.y
@@ -4860,6 +4860,22 @@ CreateMatViewStmt:
 					$7->replace = true;
 					$$ = (Node *) ctas;
 				}
+		| CREATE OR REPLACE OptNoLog MATERIALIZED VIEW create_mv_target AS SelectStmt WITH OLD DATA_P
+				{
+					CreateTableAsStmt *ctas = makeNode(CreateTableAsStmt);
+
+					ctas->query = $9;
+					ctas->into = $7;
+					ctas->objtype = OBJECT_MATVIEW;
+					ctas->is_select_into = false;
+					ctas->if_not_exists = false;
+					/* cram additional flags into the IntoClause */
+					$7->rel->relpersistence = $4;
+					$7->skipData = false;
+					$7->keepData = true;
+					$7->replace = true;
+					$$ = (Node *) ctas;
+				}
 		;
 
 create_mv_target:
diff --git a/src/include/nodes/primnodes.h b/src/include/nodes/primnodes.h
index 4b0ee5d10d..ae84cb522e 100644
--- a/src/include/nodes/primnodes.h
+++ b/src/include/nodes/primnodes.h
@@ -168,6 +168,7 @@ typedef struct IntoClause
 	/* materialized view's SELECT query */
 	Node	   *viewQuery pg_node_attr(query_jumble_ignore);
 	bool		skipData;		/* true for WITH NO DATA */
+	bool		keepData;		/* true for WITH OLD DATA */
 	bool		replace;		/* replace existing matview? */
 } IntoClause;
 
diff --git a/src/test/regress/expected/matview.out b/src/test/regress/expected/matview.out
index cefd0d442c..47dfd88bff 100644
--- a/src/test/regress/expected/matview.out
+++ b/src/test/regress/expected/matview.out
@@ -751,6 +751,23 @@ SELECT * FROM mvtest_replace;
  3
 (1 row)
 
+-- replace query but keep old data
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 5 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+ a 
+---
+ 3
+(1 row)
+
+REFRESH MATERIALIZED VIEW mvtest_replace;
+SELECT * FROM mvtest_replace;
+ a 
+---
+ 5
+(1 row)
+
 -- add column
 CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
   SELECT 4 AS a, 1 b;
@@ -905,3 +922,14 @@ ERROR:  syntax error at or near "NOT"
 LINE 1: CREATE OR REPLACE MATERIALIZED VIEW IF NOT EXISTS mvtest_rep...
                                                ^
 DROP MATERIALIZED VIEW mvtest_replace;
+-- Create new matview WITH OLD DATA.  This populates the new matview as if
+-- WITH DATA had been specified.
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 17 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+ a  
+----
+ 17
+(1 row)
+
diff --git a/src/test/regress/sql/matview.sql b/src/test/regress/sql/matview.sql
index c12f0243c9..b268237c24 100644
--- a/src/test/regress/sql/matview.sql
+++ b/src/test/regress/sql/matview.sql
@@ -338,6 +338,14 @@ SELECT * FROM mvtest_replace; -- error: not populated
 REFRESH MATERIALIZED VIEW mvtest_replace;
 SELECT * FROM mvtest_replace;
 
+-- replace query but keep old data
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 5 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+REFRESH MATERIALIZED VIEW mvtest_replace;
+SELECT * FROM mvtest_replace;
+
 -- add column
 CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
   SELECT 4 AS a, 1 b;
@@ -422,3 +430,10 @@ CREATE OR REPLACE MATERIALIZED VIEW IF NOT EXISTS mvtest_replace AS
   SELECT 1 AS a;
 
 DROP MATERIALIZED VIEW mvtest_replace;
+
+-- Create new matview WITH OLD DATA.  This populates the new matview as if
+-- WITH DATA had been specified.
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 17 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
-- 
2.45.2


--nrp556lrhtfteavd--





^ permalink  raw  reply  [nested|flat] 809+ messages in thread

* [PATCH v3 3/3] Replace matview WITH OLD DATA
@ 2024-07-26 21:33  Erik Wienhold <ewie@ewie.name>
  0 siblings, 0 replies; 809+ messages in thread

From: Erik Wienhold @ 2024-07-26 21:33 UTC (permalink / raw)

---
 .../sgml/ref/create_materialized_view.sgml    | 16 +++++++++--
 src/backend/commands/createas.c               | 26 +++++++++++------
 src/backend/parser/gram.y                     | 16 +++++++++++
 src/include/nodes/primnodes.h                 |  1 +
 src/test/regress/expected/matview.out         | 28 +++++++++++++++++++
 src/test/regress/sql/matview.sql              | 15 ++++++++++
 6 files changed, 90 insertions(+), 12 deletions(-)

diff --git a/doc/src/sgml/ref/create_materialized_view.sgml b/doc/src/sgml/ref/create_materialized_view.sgml
index b5a8e3441a..65633b8bfa 100644
--- a/doc/src/sgml/ref/create_materialized_view.sgml
+++ b/doc/src/sgml/ref/create_materialized_view.sgml
@@ -27,7 +27,7 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
     [ WITH ( <replaceable class="parameter">storage_parameter</replaceable> [= <replaceable class="parameter">value</replaceable>] [, ... ] ) ]
     [ TABLESPACE <replaceable class="parameter">tablespace_name</replaceable> ]
     AS <replaceable>query</replaceable>
-    [ WITH [ NO ] DATA ]
+    [ WITH [ NO | OLD ] DATA ]
 </synopsis>
  </refsynopsisdiv>
 
@@ -37,7 +37,8 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
   <para>
    <command>CREATE MATERIALIZED VIEW</command> defines a materialized view of
    a query.  The query is executed and used to populate the view at the time
-   the command is issued (unless <command>WITH NO DATA</command> is used) and may be
+   the command is issued (unless <command>WITH NO DATA</command> or
+   <command>WITH OLD DATA</command> is used) and may be
    refreshed later using <command>REFRESH MATERIALIZED VIEW</command>.
   </para>
 
@@ -160,7 +161,7 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
    </varlistentry>
 
    <varlistentry>
-    <term><literal>WITH [ NO ] DATA</literal></term>
+    <term><literal>WITH [ NO | OLD ] DATA</literal></term>
     <listitem>
      <para>
       This clause specifies whether or not the materialized view should be
@@ -168,6 +169,15 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
       flagged as unscannable and cannot be queried until <command>REFRESH
       MATERIALIZED VIEW</command> is used.
      </para>
+
+     <para>
+      The form <command>WITH OLD DATA</command> keeps the already stored data
+      when replacing an existing materialized view to keep it populated.  For
+      newly created materialized views, this has the same effect as
+      <command>WITH DATA</command>.  Use this form if you want to use
+      <command>REFRESH MATERIALIZED VIEW CONCURRENTLY</command> as it requires
+      a populated materialized view.
+     </para>
     </listitem>
    </varlistentry>
 
diff --git a/src/backend/commands/createas.c b/src/backend/commands/createas.c
index e4ed3748f9..96e7b81966 100644
--- a/src/backend/commands/createas.c
+++ b/src/backend/commands/createas.c
@@ -331,18 +331,26 @@ ExecCreateTableAs(ParseState *pstate, CreateTableAsStmt *stmt,
 		/* An existing materialized view can be replaced. */
 		if (is_matview && into->replace)
 		{
-			RefreshMatViewStmt *refresh;
-
 			/* Change the relation to match the new query and other options. */
-			(void) create_ctas_nodata(query->targetList, into);
+			address = create_ctas_nodata(query->targetList, into);
 
-			/* Refresh the materialized view with a fake statement. */
-			refresh = makeNode(RefreshMatViewStmt);
-			refresh->relation = into->rel;
-			refresh->skipData = into->skipData;
-			refresh->concurrent = false;
+			/*
+			 * Refresh the materialized view with a fake statement unless we
+			 * must keep the old data.
+			 */
+			if (!into->keepData)
+			{
+				RefreshMatViewStmt *refresh;
+
+				refresh = makeNode(RefreshMatViewStmt);
+				refresh->relation = into->rel;
+				refresh->skipData = into->skipData;
+				refresh->concurrent = false;
+
+				address = ExecRefreshMatView(refresh, NULL, NULL);
+			}
 
-			return ExecRefreshMatView(refresh, NULL, NULL);
+			return address;
 		}
 
 		return InvalidObjectAddress;
diff --git a/src/backend/parser/gram.y b/src/backend/parser/gram.y
index 4b939ea7ca..e45ebb24f8 100644
--- a/src/backend/parser/gram.y
+++ b/src/backend/parser/gram.y
@@ -4808,6 +4808,22 @@ CreateMatViewStmt:
 					$7->replace = true;
 					$$ = (Node *) ctas;
 				}
+		| CREATE OR REPLACE OptNoLog MATERIALIZED VIEW create_mv_target AS SelectStmt WITH OLD DATA_P
+				{
+					CreateTableAsStmt *ctas = makeNode(CreateTableAsStmt);
+
+					ctas->query = $9;
+					ctas->into = $7;
+					ctas->objtype = OBJECT_MATVIEW;
+					ctas->is_select_into = false;
+					ctas->if_not_exists = false;
+					/* cram additional flags into the IntoClause */
+					$7->rel->relpersistence = $4;
+					$7->skipData = false;
+					$7->keepData = true;
+					$7->replace = true;
+					$$ = (Node *) ctas;
+				}
 		;
 
 create_mv_target:
diff --git a/src/include/nodes/primnodes.h b/src/include/nodes/primnodes.h
index 4b0ee5d10d..ae84cb522e 100644
--- a/src/include/nodes/primnodes.h
+++ b/src/include/nodes/primnodes.h
@@ -168,6 +168,7 @@ typedef struct IntoClause
 	/* materialized view's SELECT query */
 	Node	   *viewQuery pg_node_attr(query_jumble_ignore);
 	bool		skipData;		/* true for WITH NO DATA */
+	bool		keepData;		/* true for WITH OLD DATA */
 	bool		replace;		/* replace existing matview? */
 } IntoClause;
 
diff --git a/src/test/regress/expected/matview.out b/src/test/regress/expected/matview.out
index cefd0d442c..47dfd88bff 100644
--- a/src/test/regress/expected/matview.out
+++ b/src/test/regress/expected/matview.out
@@ -751,6 +751,23 @@ SELECT * FROM mvtest_replace;
  3
 (1 row)
 
+-- replace query but keep old data
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 5 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+ a 
+---
+ 3
+(1 row)
+
+REFRESH MATERIALIZED VIEW mvtest_replace;
+SELECT * FROM mvtest_replace;
+ a 
+---
+ 5
+(1 row)
+
 -- add column
 CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
   SELECT 4 AS a, 1 b;
@@ -905,3 +922,14 @@ ERROR:  syntax error at or near "NOT"
 LINE 1: CREATE OR REPLACE MATERIALIZED VIEW IF NOT EXISTS mvtest_rep...
                                                ^
 DROP MATERIALIZED VIEW mvtest_replace;
+-- Create new matview WITH OLD DATA.  This populates the new matview as if
+-- WITH DATA had been specified.
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 17 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+ a  
+----
+ 17
+(1 row)
+
diff --git a/src/test/regress/sql/matview.sql b/src/test/regress/sql/matview.sql
index c12f0243c9..b268237c24 100644
--- a/src/test/regress/sql/matview.sql
+++ b/src/test/regress/sql/matview.sql
@@ -338,6 +338,14 @@ SELECT * FROM mvtest_replace; -- error: not populated
 REFRESH MATERIALIZED VIEW mvtest_replace;
 SELECT * FROM mvtest_replace;
 
+-- replace query but keep old data
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 5 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+REFRESH MATERIALIZED VIEW mvtest_replace;
+SELECT * FROM mvtest_replace;
+
 -- add column
 CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
   SELECT 4 AS a, 1 b;
@@ -422,3 +430,10 @@ CREATE OR REPLACE MATERIALIZED VIEW IF NOT EXISTS mvtest_replace AS
   SELECT 1 AS a;
 
 DROP MATERIALIZED VIEW mvtest_replace;
+
+-- Create new matview WITH OLD DATA.  This populates the new matview as if
+-- WITH DATA had been specified.
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 17 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
-- 
2.46.0


--muysnh7l3kienazz--





^ permalink  raw  reply  [nested|flat] 809+ messages in thread

* [PATCH v4 3/3] Replace matview WITH OLD DATA
@ 2024-07-26 21:33  Erik Wienhold <ewie@ewie.name>
  0 siblings, 0 replies; 809+ messages in thread

From: Erik Wienhold @ 2024-07-26 21:33 UTC (permalink / raw)

---
 .../sgml/ref/create_materialized_view.sgml    | 16 +++++++++--
 src/backend/commands/createas.c               | 26 +++++++++++------
 src/backend/parser/gram.y                     | 16 +++++++++++
 src/include/nodes/primnodes.h                 |  1 +
 src/test/regress/expected/matview.out         | 28 +++++++++++++++++++
 src/test/regress/sql/matview.sql              | 15 ++++++++++
 6 files changed, 90 insertions(+), 12 deletions(-)

diff --git a/doc/src/sgml/ref/create_materialized_view.sgml b/doc/src/sgml/ref/create_materialized_view.sgml
index 5e03320eb7..1352e9de40 100644
--- a/doc/src/sgml/ref/create_materialized_view.sgml
+++ b/doc/src/sgml/ref/create_materialized_view.sgml
@@ -27,7 +27,7 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
     [ WITH ( <replaceable class="parameter">storage_parameter</replaceable> [= <replaceable class="parameter">value</replaceable>] [, ... ] ) ]
     [ TABLESPACE <replaceable class="parameter">tablespace_name</replaceable> ]
     AS <replaceable>query</replaceable>
-    [ WITH [ NO ] DATA ]
+    [ WITH [ NO | OLD ] DATA ]
 </synopsis>
  </refsynopsisdiv>
 
@@ -37,7 +37,8 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
   <para>
    <command>CREATE MATERIALIZED VIEW</command> defines a materialized view of
    a query.  The query is executed and used to populate the view at the time
-   the command is issued (unless <command>WITH NO DATA</command> is used) and may be
+   the command is issued (unless <command>WITH NO DATA</command> or
+   <command>WITH OLD DATA</command> is used) and may be
    refreshed later using <command>REFRESH MATERIALIZED VIEW</command>.
   </para>
 
@@ -162,7 +163,7 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
    </varlistentry>
 
    <varlistentry>
-    <term><literal>WITH [ NO ] DATA</literal></term>
+    <term><literal>WITH [ NO | OLD ] DATA</literal></term>
     <listitem>
      <para>
       This clause specifies whether or not the materialized view should be
@@ -170,6 +171,15 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
       flagged as unscannable and cannot be queried until <command>REFRESH
       MATERIALIZED VIEW</command> is used.
      </para>
+
+     <para>
+      The form <command>WITH OLD DATA</command> keeps the already stored data
+      when replacing an existing materialized view to keep it populated.  For
+      newly created materialized views, this has the same effect as
+      <command>WITH DATA</command>.  Use this form if you want to use
+      <command>REFRESH MATERIALIZED VIEW CONCURRENTLY</command> as it requires
+      a populated materialized view.
+     </para>
     </listitem>
    </varlistentry>
 
diff --git a/src/backend/commands/createas.c b/src/backend/commands/createas.c
index d4bc5e5c08..8db000554c 100644
--- a/src/backend/commands/createas.c
+++ b/src/backend/commands/createas.c
@@ -332,18 +332,26 @@ ExecCreateTableAs(ParseState *pstate, CreateTableAsStmt *stmt,
 		/* An existing materialized view can be replaced. */
 		if (is_matview && into->replace)
 		{
-			RefreshMatViewStmt *refresh;
-
 			/* Change the relation to match the new query and other options. */
-			(void) create_ctas_nodata(query->targetList, into);
+			address = create_ctas_nodata(query->targetList, into);
 
-			/* Refresh the materialized view with a fake statement. */
-			refresh = makeNode(RefreshMatViewStmt);
-			refresh->relation = into->rel;
-			refresh->skipData = into->skipData;
-			refresh->concurrent = false;
+			/*
+			 * Refresh the materialized view with a fake statement unless we
+			 * must keep the old data.
+			 */
+			if (!into->keepData)
+			{
+				RefreshMatViewStmt *refresh;
+
+				refresh = makeNode(RefreshMatViewStmt);
+				refresh->relation = into->rel;
+				refresh->skipData = into->skipData;
+				refresh->concurrent = false;
+
+				address = ExecRefreshMatView(refresh, NULL, NULL);
+			}
 
-			return ExecRefreshMatView(refresh, NULL, NULL);
+			return address;
 		}
 
 		return InvalidObjectAddress;
diff --git a/src/backend/parser/gram.y b/src/backend/parser/gram.y
index dadc6b630a..1be1a95cd9 100644
--- a/src/backend/parser/gram.y
+++ b/src/backend/parser/gram.y
@@ -4838,6 +4838,22 @@ CreateMatViewStmt:
 					$7->replace = true;
 					$$ = (Node *) ctas;
 				}
+		| CREATE OR REPLACE OptNoLog MATERIALIZED VIEW create_mv_target AS SelectStmt WITH OLD DATA_P
+				{
+					CreateTableAsStmt *ctas = makeNode(CreateTableAsStmt);
+
+					ctas->query = $9;
+					ctas->into = $7;
+					ctas->objtype = OBJECT_MATVIEW;
+					ctas->is_select_into = false;
+					ctas->if_not_exists = false;
+					/* cram additional flags into the IntoClause */
+					$7->rel->relpersistence = $4;
+					$7->skipData = false;
+					$7->keepData = true;
+					$7->replace = true;
+					$$ = (Node *) ctas;
+				}
 		;
 
 create_mv_target:
diff --git a/src/include/nodes/primnodes.h b/src/include/nodes/primnodes.h
index 533fa847ab..6fa3291c64 100644
--- a/src/include/nodes/primnodes.h
+++ b/src/include/nodes/primnodes.h
@@ -168,6 +168,7 @@ typedef struct IntoClause
 	/* materialized view's SELECT query */
 	struct Query *viewQuery pg_node_attr(query_jumble_ignore);
 	bool		skipData;		/* true for WITH NO DATA */
+	bool		keepData;		/* true for WITH OLD DATA */
 	bool		replace;		/* replace existing matview? */
 } IntoClause;
 
diff --git a/src/test/regress/expected/matview.out b/src/test/regress/expected/matview.out
index cefd0d442c..47dfd88bff 100644
--- a/src/test/regress/expected/matview.out
+++ b/src/test/regress/expected/matview.out
@@ -751,6 +751,23 @@ SELECT * FROM mvtest_replace;
  3
 (1 row)
 
+-- replace query but keep old data
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 5 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+ a 
+---
+ 3
+(1 row)
+
+REFRESH MATERIALIZED VIEW mvtest_replace;
+SELECT * FROM mvtest_replace;
+ a 
+---
+ 5
+(1 row)
+
 -- add column
 CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
   SELECT 4 AS a, 1 b;
@@ -905,3 +922,14 @@ ERROR:  syntax error at or near "NOT"
 LINE 1: CREATE OR REPLACE MATERIALIZED VIEW IF NOT EXISTS mvtest_rep...
                                                ^
 DROP MATERIALIZED VIEW mvtest_replace;
+-- Create new matview WITH OLD DATA.  This populates the new matview as if
+-- WITH DATA had been specified.
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 17 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+ a  
+----
+ 17
+(1 row)
+
diff --git a/src/test/regress/sql/matview.sql b/src/test/regress/sql/matview.sql
index c12f0243c9..b268237c24 100644
--- a/src/test/regress/sql/matview.sql
+++ b/src/test/regress/sql/matview.sql
@@ -338,6 +338,14 @@ SELECT * FROM mvtest_replace; -- error: not populated
 REFRESH MATERIALIZED VIEW mvtest_replace;
 SELECT * FROM mvtest_replace;
 
+-- replace query but keep old data
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 5 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+REFRESH MATERIALIZED VIEW mvtest_replace;
+SELECT * FROM mvtest_replace;
+
 -- add column
 CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
   SELECT 4 AS a, 1 b;
@@ -422,3 +430,10 @@ CREATE OR REPLACE MATERIALIZED VIEW IF NOT EXISTS mvtest_replace AS
   SELECT 1 AS a;
 
 DROP MATERIALIZED VIEW mvtest_replace;
+
+-- Create new matview WITH OLD DATA.  This populates the new matview as if
+-- WITH DATA had been specified.
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 17 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
-- 
2.47.0


--hht4bymbvbva5al5--





^ permalink  raw  reply  [nested|flat] 809+ messages in thread

* [PATCH v2 3/3] Replace matview WITH OLD DATA
@ 2024-07-26 21:33  Erik Wienhold <ewie@ewie.name>
  0 siblings, 0 replies; 809+ messages in thread

From: Erik Wienhold @ 2024-07-26 21:33 UTC (permalink / raw)

---
 .../sgml/ref/create_materialized_view.sgml    | 16 +++++++++--
 src/backend/commands/createas.c               | 26 +++++++++++------
 src/backend/parser/gram.y                     | 16 +++++++++++
 src/include/nodes/primnodes.h                 |  1 +
 src/test/regress/expected/matview.out         | 28 +++++++++++++++++++
 src/test/regress/sql/matview.sql              | 15 ++++++++++
 6 files changed, 90 insertions(+), 12 deletions(-)

diff --git a/doc/src/sgml/ref/create_materialized_view.sgml b/doc/src/sgml/ref/create_materialized_view.sgml
index b5a8e3441a..65633b8bfa 100644
--- a/doc/src/sgml/ref/create_materialized_view.sgml
+++ b/doc/src/sgml/ref/create_materialized_view.sgml
@@ -27,7 +27,7 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
     [ WITH ( <replaceable class="parameter">storage_parameter</replaceable> [= <replaceable class="parameter">value</replaceable>] [, ... ] ) ]
     [ TABLESPACE <replaceable class="parameter">tablespace_name</replaceable> ]
     AS <replaceable>query</replaceable>
-    [ WITH [ NO ] DATA ]
+    [ WITH [ NO | OLD ] DATA ]
 </synopsis>
  </refsynopsisdiv>
 
@@ -37,7 +37,8 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
   <para>
    <command>CREATE MATERIALIZED VIEW</command> defines a materialized view of
    a query.  The query is executed and used to populate the view at the time
-   the command is issued (unless <command>WITH NO DATA</command> is used) and may be
+   the command is issued (unless <command>WITH NO DATA</command> or
+   <command>WITH OLD DATA</command> is used) and may be
    refreshed later using <command>REFRESH MATERIALIZED VIEW</command>.
   </para>
 
@@ -160,7 +161,7 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
    </varlistentry>
 
    <varlistentry>
-    <term><literal>WITH [ NO ] DATA</literal></term>
+    <term><literal>WITH [ NO | OLD ] DATA</literal></term>
     <listitem>
      <para>
       This clause specifies whether or not the materialized view should be
@@ -168,6 +169,15 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
       flagged as unscannable and cannot be queried until <command>REFRESH
       MATERIALIZED VIEW</command> is used.
      </para>
+
+     <para>
+      The form <command>WITH OLD DATA</command> keeps the already stored data
+      when replacing an existing materialized view to keep it populated.  For
+      newly created materialized views, this has the same effect as
+      <command>WITH DATA</command>.  Use this form if you want to use
+      <command>REFRESH MATERIALIZED VIEW CONCURRENTLY</command> as it requires
+      a populated materialized view.
+     </para>
     </listitem>
    </varlistentry>
 
diff --git a/src/backend/commands/createas.c b/src/backend/commands/createas.c
index c5d78252a1..e2948ac966 100644
--- a/src/backend/commands/createas.c
+++ b/src/backend/commands/createas.c
@@ -334,18 +334,26 @@ ExecCreateTableAs(ParseState *pstate, CreateTableAsStmt *stmt,
 		/* An existing materialized view can be replaced. */
 		if (is_matview && into->replace)
 		{
-			RefreshMatViewStmt *refresh;
-
 			/* Change the relation to match the new query and other options. */
-			(void) create_ctas_nodata(query->targetList, into);
+			address = create_ctas_nodata(query->targetList, into);
 
-			/* Refresh the materialized view with a fake statement. */
-			refresh = makeNode(RefreshMatViewStmt);
-			refresh->relation = into->rel;
-			refresh->skipData = into->skipData;
-			refresh->concurrent = false;
+			/*
+			 * Refresh the materialized view with a fake statement unless we
+			 * must keep the old data.
+			 */
+			if (!into->keepData)
+			{
+				RefreshMatViewStmt *refresh;
+
+				refresh = makeNode(RefreshMatViewStmt);
+				refresh->relation = into->rel;
+				refresh->skipData = into->skipData;
+				refresh->concurrent = false;
+
+				address = ExecRefreshMatView(refresh, NULL, NULL, NULL);
+			}
 
-			return ExecRefreshMatView(refresh, NULL, NULL, NULL);
+			return address;
 		}
 
 		return InvalidObjectAddress;
diff --git a/src/backend/parser/gram.y b/src/backend/parser/gram.y
index b1100bdec1..0647955005 100644
--- a/src/backend/parser/gram.y
+++ b/src/backend/parser/gram.y
@@ -4860,6 +4860,22 @@ CreateMatViewStmt:
 					$7->replace = true;
 					$$ = (Node *) ctas;
 				}
+		| CREATE OR REPLACE OptNoLog MATERIALIZED VIEW create_mv_target AS SelectStmt WITH OLD DATA_P
+				{
+					CreateTableAsStmt *ctas = makeNode(CreateTableAsStmt);
+
+					ctas->query = $9;
+					ctas->into = $7;
+					ctas->objtype = OBJECT_MATVIEW;
+					ctas->is_select_into = false;
+					ctas->if_not_exists = false;
+					/* cram additional flags into the IntoClause */
+					$7->rel->relpersistence = $4;
+					$7->skipData = false;
+					$7->keepData = true;
+					$7->replace = true;
+					$$ = (Node *) ctas;
+				}
 		;
 
 create_mv_target:
diff --git a/src/include/nodes/primnodes.h b/src/include/nodes/primnodes.h
index 4b0ee5d10d..ae84cb522e 100644
--- a/src/include/nodes/primnodes.h
+++ b/src/include/nodes/primnodes.h
@@ -168,6 +168,7 @@ typedef struct IntoClause
 	/* materialized view's SELECT query */
 	Node	   *viewQuery pg_node_attr(query_jumble_ignore);
 	bool		skipData;		/* true for WITH NO DATA */
+	bool		keepData;		/* true for WITH OLD DATA */
 	bool		replace;		/* replace existing matview? */
 } IntoClause;
 
diff --git a/src/test/regress/expected/matview.out b/src/test/regress/expected/matview.out
index cefd0d442c..47dfd88bff 100644
--- a/src/test/regress/expected/matview.out
+++ b/src/test/regress/expected/matview.out
@@ -751,6 +751,23 @@ SELECT * FROM mvtest_replace;
  3
 (1 row)
 
+-- replace query but keep old data
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 5 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+ a 
+---
+ 3
+(1 row)
+
+REFRESH MATERIALIZED VIEW mvtest_replace;
+SELECT * FROM mvtest_replace;
+ a 
+---
+ 5
+(1 row)
+
 -- add column
 CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
   SELECT 4 AS a, 1 b;
@@ -905,3 +922,14 @@ ERROR:  syntax error at or near "NOT"
 LINE 1: CREATE OR REPLACE MATERIALIZED VIEW IF NOT EXISTS mvtest_rep...
                                                ^
 DROP MATERIALIZED VIEW mvtest_replace;
+-- Create new matview WITH OLD DATA.  This populates the new matview as if
+-- WITH DATA had been specified.
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 17 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+ a  
+----
+ 17
+(1 row)
+
diff --git a/src/test/regress/sql/matview.sql b/src/test/regress/sql/matview.sql
index c12f0243c9..b268237c24 100644
--- a/src/test/regress/sql/matview.sql
+++ b/src/test/regress/sql/matview.sql
@@ -338,6 +338,14 @@ SELECT * FROM mvtest_replace; -- error: not populated
 REFRESH MATERIALIZED VIEW mvtest_replace;
 SELECT * FROM mvtest_replace;
 
+-- replace query but keep old data
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 5 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+REFRESH MATERIALIZED VIEW mvtest_replace;
+SELECT * FROM mvtest_replace;
+
 -- add column
 CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
   SELECT 4 AS a, 1 b;
@@ -422,3 +430,10 @@ CREATE OR REPLACE MATERIALIZED VIEW IF NOT EXISTS mvtest_replace AS
   SELECT 1 AS a;
 
 DROP MATERIALIZED VIEW mvtest_replace;
+
+-- Create new matview WITH OLD DATA.  This populates the new matview as if
+-- WITH DATA had been specified.
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 17 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
-- 
2.45.2


--nrp556lrhtfteavd--





^ permalink  raw  reply  [nested|flat] 809+ messages in thread

* [PATCH v3 3/3] Replace matview WITH OLD DATA
@ 2024-07-26 21:33  Erik Wienhold <ewie@ewie.name>
  0 siblings, 0 replies; 809+ messages in thread

From: Erik Wienhold @ 2024-07-26 21:33 UTC (permalink / raw)

---
 .../sgml/ref/create_materialized_view.sgml    | 16 +++++++++--
 src/backend/commands/createas.c               | 26 +++++++++++------
 src/backend/parser/gram.y                     | 16 +++++++++++
 src/include/nodes/primnodes.h                 |  1 +
 src/test/regress/expected/matview.out         | 28 +++++++++++++++++++
 src/test/regress/sql/matview.sql              | 15 ++++++++++
 6 files changed, 90 insertions(+), 12 deletions(-)

diff --git a/doc/src/sgml/ref/create_materialized_view.sgml b/doc/src/sgml/ref/create_materialized_view.sgml
index b5a8e3441a..65633b8bfa 100644
--- a/doc/src/sgml/ref/create_materialized_view.sgml
+++ b/doc/src/sgml/ref/create_materialized_view.sgml
@@ -27,7 +27,7 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
     [ WITH ( <replaceable class="parameter">storage_parameter</replaceable> [= <replaceable class="parameter">value</replaceable>] [, ... ] ) ]
     [ TABLESPACE <replaceable class="parameter">tablespace_name</replaceable> ]
     AS <replaceable>query</replaceable>
-    [ WITH [ NO ] DATA ]
+    [ WITH [ NO | OLD ] DATA ]
 </synopsis>
  </refsynopsisdiv>
 
@@ -37,7 +37,8 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
   <para>
    <command>CREATE MATERIALIZED VIEW</command> defines a materialized view of
    a query.  The query is executed and used to populate the view at the time
-   the command is issued (unless <command>WITH NO DATA</command> is used) and may be
+   the command is issued (unless <command>WITH NO DATA</command> or
+   <command>WITH OLD DATA</command> is used) and may be
    refreshed later using <command>REFRESH MATERIALIZED VIEW</command>.
   </para>
 
@@ -160,7 +161,7 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
    </varlistentry>
 
    <varlistentry>
-    <term><literal>WITH [ NO ] DATA</literal></term>
+    <term><literal>WITH [ NO | OLD ] DATA</literal></term>
     <listitem>
      <para>
       This clause specifies whether or not the materialized view should be
@@ -168,6 +169,15 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
       flagged as unscannable and cannot be queried until <command>REFRESH
       MATERIALIZED VIEW</command> is used.
      </para>
+
+     <para>
+      The form <command>WITH OLD DATA</command> keeps the already stored data
+      when replacing an existing materialized view to keep it populated.  For
+      newly created materialized views, this has the same effect as
+      <command>WITH DATA</command>.  Use this form if you want to use
+      <command>REFRESH MATERIALIZED VIEW CONCURRENTLY</command> as it requires
+      a populated materialized view.
+     </para>
     </listitem>
    </varlistentry>
 
diff --git a/src/backend/commands/createas.c b/src/backend/commands/createas.c
index e4ed3748f9..96e7b81966 100644
--- a/src/backend/commands/createas.c
+++ b/src/backend/commands/createas.c
@@ -331,18 +331,26 @@ ExecCreateTableAs(ParseState *pstate, CreateTableAsStmt *stmt,
 		/* An existing materialized view can be replaced. */
 		if (is_matview && into->replace)
 		{
-			RefreshMatViewStmt *refresh;
-
 			/* Change the relation to match the new query and other options. */
-			(void) create_ctas_nodata(query->targetList, into);
+			address = create_ctas_nodata(query->targetList, into);
 
-			/* Refresh the materialized view with a fake statement. */
-			refresh = makeNode(RefreshMatViewStmt);
-			refresh->relation = into->rel;
-			refresh->skipData = into->skipData;
-			refresh->concurrent = false;
+			/*
+			 * Refresh the materialized view with a fake statement unless we
+			 * must keep the old data.
+			 */
+			if (!into->keepData)
+			{
+				RefreshMatViewStmt *refresh;
+
+				refresh = makeNode(RefreshMatViewStmt);
+				refresh->relation = into->rel;
+				refresh->skipData = into->skipData;
+				refresh->concurrent = false;
+
+				address = ExecRefreshMatView(refresh, NULL, NULL);
+			}
 
-			return ExecRefreshMatView(refresh, NULL, NULL);
+			return address;
 		}
 
 		return InvalidObjectAddress;
diff --git a/src/backend/parser/gram.y b/src/backend/parser/gram.y
index 4b939ea7ca..e45ebb24f8 100644
--- a/src/backend/parser/gram.y
+++ b/src/backend/parser/gram.y
@@ -4808,6 +4808,22 @@ CreateMatViewStmt:
 					$7->replace = true;
 					$$ = (Node *) ctas;
 				}
+		| CREATE OR REPLACE OptNoLog MATERIALIZED VIEW create_mv_target AS SelectStmt WITH OLD DATA_P
+				{
+					CreateTableAsStmt *ctas = makeNode(CreateTableAsStmt);
+
+					ctas->query = $9;
+					ctas->into = $7;
+					ctas->objtype = OBJECT_MATVIEW;
+					ctas->is_select_into = false;
+					ctas->if_not_exists = false;
+					/* cram additional flags into the IntoClause */
+					$7->rel->relpersistence = $4;
+					$7->skipData = false;
+					$7->keepData = true;
+					$7->replace = true;
+					$$ = (Node *) ctas;
+				}
 		;
 
 create_mv_target:
diff --git a/src/include/nodes/primnodes.h b/src/include/nodes/primnodes.h
index 4b0ee5d10d..ae84cb522e 100644
--- a/src/include/nodes/primnodes.h
+++ b/src/include/nodes/primnodes.h
@@ -168,6 +168,7 @@ typedef struct IntoClause
 	/* materialized view's SELECT query */
 	Node	   *viewQuery pg_node_attr(query_jumble_ignore);
 	bool		skipData;		/* true for WITH NO DATA */
+	bool		keepData;		/* true for WITH OLD DATA */
 	bool		replace;		/* replace existing matview? */
 } IntoClause;
 
diff --git a/src/test/regress/expected/matview.out b/src/test/regress/expected/matview.out
index cefd0d442c..47dfd88bff 100644
--- a/src/test/regress/expected/matview.out
+++ b/src/test/regress/expected/matview.out
@@ -751,6 +751,23 @@ SELECT * FROM mvtest_replace;
  3
 (1 row)
 
+-- replace query but keep old data
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 5 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+ a 
+---
+ 3
+(1 row)
+
+REFRESH MATERIALIZED VIEW mvtest_replace;
+SELECT * FROM mvtest_replace;
+ a 
+---
+ 5
+(1 row)
+
 -- add column
 CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
   SELECT 4 AS a, 1 b;
@@ -905,3 +922,14 @@ ERROR:  syntax error at or near "NOT"
 LINE 1: CREATE OR REPLACE MATERIALIZED VIEW IF NOT EXISTS mvtest_rep...
                                                ^
 DROP MATERIALIZED VIEW mvtest_replace;
+-- Create new matview WITH OLD DATA.  This populates the new matview as if
+-- WITH DATA had been specified.
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 17 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+ a  
+----
+ 17
+(1 row)
+
diff --git a/src/test/regress/sql/matview.sql b/src/test/regress/sql/matview.sql
index c12f0243c9..b268237c24 100644
--- a/src/test/regress/sql/matview.sql
+++ b/src/test/regress/sql/matview.sql
@@ -338,6 +338,14 @@ SELECT * FROM mvtest_replace; -- error: not populated
 REFRESH MATERIALIZED VIEW mvtest_replace;
 SELECT * FROM mvtest_replace;
 
+-- replace query but keep old data
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 5 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+REFRESH MATERIALIZED VIEW mvtest_replace;
+SELECT * FROM mvtest_replace;
+
 -- add column
 CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
   SELECT 4 AS a, 1 b;
@@ -422,3 +430,10 @@ CREATE OR REPLACE MATERIALIZED VIEW IF NOT EXISTS mvtest_replace AS
   SELECT 1 AS a;
 
 DROP MATERIALIZED VIEW mvtest_replace;
+
+-- Create new matview WITH OLD DATA.  This populates the new matview as if
+-- WITH DATA had been specified.
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 17 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
-- 
2.46.0


--muysnh7l3kienazz--





^ permalink  raw  reply  [nested|flat] 809+ messages in thread

* [PATCH v6 3/3] Replace matview WITH OLD DATA
@ 2024-07-26 21:33  Erik Wienhold <ewie@ewie.name>
  0 siblings, 0 replies; 809+ messages in thread

From: Erik Wienhold @ 2024-07-26 21:33 UTC (permalink / raw)

---
 .../sgml/ref/create_materialized_view.sgml    | 16 +++++++++--
 src/backend/commands/createas.c               | 26 +++++++++++------
 src/backend/parser/gram.y                     | 16 +++++++++++
 src/include/nodes/primnodes.h                 |  1 +
 src/test/regress/expected/matview.out         | 28 +++++++++++++++++++
 src/test/regress/sql/matview.sql              | 15 ++++++++++
 6 files changed, 90 insertions(+), 12 deletions(-)

diff --git a/doc/src/sgml/ref/create_materialized_view.sgml b/doc/src/sgml/ref/create_materialized_view.sgml
index 5e03320eb73..1352e9de409 100644
--- a/doc/src/sgml/ref/create_materialized_view.sgml
+++ b/doc/src/sgml/ref/create_materialized_view.sgml
@@ -27,7 +27,7 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
     [ WITH ( <replaceable class="parameter">storage_parameter</replaceable> [= <replaceable class="parameter">value</replaceable>] [, ... ] ) ]
     [ TABLESPACE <replaceable class="parameter">tablespace_name</replaceable> ]
     AS <replaceable>query</replaceable>
-    [ WITH [ NO ] DATA ]
+    [ WITH [ NO | OLD ] DATA ]
 </synopsis>
  </refsynopsisdiv>
 
@@ -37,7 +37,8 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
   <para>
    <command>CREATE MATERIALIZED VIEW</command> defines a materialized view of
    a query.  The query is executed and used to populate the view at the time
-   the command is issued (unless <command>WITH NO DATA</command> is used) and may be
+   the command is issued (unless <command>WITH NO DATA</command> or
+   <command>WITH OLD DATA</command> is used) and may be
    refreshed later using <command>REFRESH MATERIALIZED VIEW</command>.
   </para>
 
@@ -162,7 +163,7 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
    </varlistentry>
 
    <varlistentry>
-    <term><literal>WITH [ NO ] DATA</literal></term>
+    <term><literal>WITH [ NO | OLD ] DATA</literal></term>
     <listitem>
      <para>
       This clause specifies whether or not the materialized view should be
@@ -170,6 +171,15 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
       flagged as unscannable and cannot be queried until <command>REFRESH
       MATERIALIZED VIEW</command> is used.
      </para>
+
+     <para>
+      The form <command>WITH OLD DATA</command> keeps the already stored data
+      when replacing an existing materialized view to keep it populated.  For
+      newly created materialized views, this has the same effect as
+      <command>WITH DATA</command>.  Use this form if you want to use
+      <command>REFRESH MATERIALIZED VIEW CONCURRENTLY</command> as it requires
+      a populated materialized view.
+     </para>
     </listitem>
    </varlistentry>
 
diff --git a/src/backend/commands/createas.c b/src/backend/commands/createas.c
index 9f37ed7f177..0ed44b246bd 100644
--- a/src/backend/commands/createas.c
+++ b/src/backend/commands/createas.c
@@ -332,18 +332,26 @@ ExecCreateTableAs(ParseState *pstate, CreateTableAsStmt *stmt,
 		/* An existing materialized view can be replaced. */
 		if (is_matview && into->replace)
 		{
-			RefreshMatViewStmt *refresh;
-
 			/* Change the relation to match the new query and other options. */
-			(void) create_ctas_nodata(query->targetList, into);
+			address = create_ctas_nodata(query->targetList, into);
 
-			/* Refresh the materialized view with a fake statement. */
-			refresh = makeNode(RefreshMatViewStmt);
-			refresh->relation = into->rel;
-			refresh->skipData = into->skipData;
-			refresh->concurrent = false;
+			/*
+			 * Refresh the materialized view with a fake statement unless we
+			 * must keep the old data.
+			 */
+			if (!into->keepData)
+			{
+				RefreshMatViewStmt *refresh;
+
+				refresh = makeNode(RefreshMatViewStmt);
+				refresh->relation = into->rel;
+				refresh->skipData = into->skipData;
+				refresh->concurrent = false;
+
+				address = ExecRefreshMatView(refresh, pstate->p_sourcetext, qc);
+			}
 
-			return ExecRefreshMatView(refresh, pstate->p_sourcetext, qc);
+			return address;
 		}
 
 		return InvalidObjectAddress;
diff --git a/src/backend/parser/gram.y b/src/backend/parser/gram.y
index 8be790eaccf..e405268f413 100644
--- a/src/backend/parser/gram.y
+++ b/src/backend/parser/gram.y
@@ -4924,6 +4924,22 @@ CreateMatViewStmt:
 					$7->replace = true;
 					$$ = (Node *) ctas;
 				}
+		| CREATE OR REPLACE OptNoLog MATERIALIZED VIEW create_mv_target AS SelectStmt WITH OLD DATA_P
+				{
+					CreateTableAsStmt *ctas = makeNode(CreateTableAsStmt);
+
+					ctas->query = $9;
+					ctas->into = $7;
+					ctas->objtype = OBJECT_MATVIEW;
+					ctas->is_select_into = false;
+					ctas->if_not_exists = false;
+					/* cram additional flags into the IntoClause */
+					$7->rel->relpersistence = $4;
+					$7->skipData = false;
+					$7->keepData = true;
+					$7->replace = true;
+					$$ = (Node *) ctas;
+				}
 		;
 
 create_mv_target:
diff --git a/src/include/nodes/primnodes.h b/src/include/nodes/primnodes.h
index e800d13a6e0..5290e6c0e8a 100644
--- a/src/include/nodes/primnodes.h
+++ b/src/include/nodes/primnodes.h
@@ -169,6 +169,7 @@ typedef struct IntoClause
 	/* materialized view's SELECT query */
 	struct Query *viewQuery pg_node_attr(query_jumble_ignore);
 	bool		skipData;		/* true for WITH NO DATA */
+	bool		keepData;		/* true for WITH OLD DATA */
 	bool		replace;		/* replace existing matview? */
 } IntoClause;
 
diff --git a/src/test/regress/expected/matview.out b/src/test/regress/expected/matview.out
index d4b42da1ddf..f0f52dd1c6c 100644
--- a/src/test/regress/expected/matview.out
+++ b/src/test/regress/expected/matview.out
@@ -751,6 +751,23 @@ SELECT * FROM mvtest_replace;
  3
 (1 row)
 
+-- replace query but keep old data
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 5 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+ a 
+---
+ 3
+(1 row)
+
+REFRESH MATERIALIZED VIEW mvtest_replace;
+SELECT * FROM mvtest_replace;
+ a 
+---
+ 5
+(1 row)
+
 -- add column
 CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
   SELECT 4 AS a, 1 b;
@@ -905,3 +922,14 @@ ERROR:  syntax error at or near "NOT"
 LINE 1: CREATE OR REPLACE MATERIALIZED VIEW IF NOT EXISTS mvtest_rep...
                                                ^
 DROP MATERIALIZED VIEW mvtest_replace;
+-- Create new matview WITH OLD DATA.  This populates the new matview as if
+-- WITH DATA had been specified.
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 17 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+ a  
+----
+ 17
+(1 row)
+
diff --git a/src/test/regress/sql/matview.sql b/src/test/regress/sql/matview.sql
index d6a4dc4b857..91f547e9cb8 100644
--- a/src/test/regress/sql/matview.sql
+++ b/src/test/regress/sql/matview.sql
@@ -338,6 +338,14 @@ SELECT * FROM mvtest_replace; -- error: not populated
 REFRESH MATERIALIZED VIEW mvtest_replace;
 SELECT * FROM mvtest_replace;
 
+-- replace query but keep old data
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 5 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+REFRESH MATERIALIZED VIEW mvtest_replace;
+SELECT * FROM mvtest_replace;
+
 -- add column
 CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
   SELECT 4 AS a, 1 b;
@@ -422,3 +430,10 @@ CREATE OR REPLACE MATERIALIZED VIEW IF NOT EXISTS mvtest_replace AS
   SELECT 1 AS a;
 
 DROP MATERIALIZED VIEW mvtest_replace;
+
+-- Create new matview WITH OLD DATA.  This populates the new matview as if
+-- WITH DATA had been specified.
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 17 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
-- 
2.48.1


--aewcrbystcgftlni--





^ permalink  raw  reply  [nested|flat] 809+ messages in thread

* [PATCH v2 3/3] Replace matview WITH OLD DATA
@ 2024-07-26 21:33  Erik Wienhold <ewie@ewie.name>
  0 siblings, 0 replies; 809+ messages in thread

From: Erik Wienhold @ 2024-07-26 21:33 UTC (permalink / raw)

---
 .../sgml/ref/create_materialized_view.sgml    | 16 +++++++++--
 src/backend/commands/createas.c               | 26 +++++++++++------
 src/backend/parser/gram.y                     | 16 +++++++++++
 src/include/nodes/primnodes.h                 |  1 +
 src/test/regress/expected/matview.out         | 28 +++++++++++++++++++
 src/test/regress/sql/matview.sql              | 15 ++++++++++
 6 files changed, 90 insertions(+), 12 deletions(-)

diff --git a/doc/src/sgml/ref/create_materialized_view.sgml b/doc/src/sgml/ref/create_materialized_view.sgml
index b5a8e3441a..65633b8bfa 100644
--- a/doc/src/sgml/ref/create_materialized_view.sgml
+++ b/doc/src/sgml/ref/create_materialized_view.sgml
@@ -27,7 +27,7 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
     [ WITH ( <replaceable class="parameter">storage_parameter</replaceable> [= <replaceable class="parameter">value</replaceable>] [, ... ] ) ]
     [ TABLESPACE <replaceable class="parameter">tablespace_name</replaceable> ]
     AS <replaceable>query</replaceable>
-    [ WITH [ NO ] DATA ]
+    [ WITH [ NO | OLD ] DATA ]
 </synopsis>
  </refsynopsisdiv>
 
@@ -37,7 +37,8 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
   <para>
    <command>CREATE MATERIALIZED VIEW</command> defines a materialized view of
    a query.  The query is executed and used to populate the view at the time
-   the command is issued (unless <command>WITH NO DATA</command> is used) and may be
+   the command is issued (unless <command>WITH NO DATA</command> or
+   <command>WITH OLD DATA</command> is used) and may be
    refreshed later using <command>REFRESH MATERIALIZED VIEW</command>.
   </para>
 
@@ -160,7 +161,7 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
    </varlistentry>
 
    <varlistentry>
-    <term><literal>WITH [ NO ] DATA</literal></term>
+    <term><literal>WITH [ NO | OLD ] DATA</literal></term>
     <listitem>
      <para>
       This clause specifies whether or not the materialized view should be
@@ -168,6 +169,15 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
       flagged as unscannable and cannot be queried until <command>REFRESH
       MATERIALIZED VIEW</command> is used.
      </para>
+
+     <para>
+      The form <command>WITH OLD DATA</command> keeps the already stored data
+      when replacing an existing materialized view to keep it populated.  For
+      newly created materialized views, this has the same effect as
+      <command>WITH DATA</command>.  Use this form if you want to use
+      <command>REFRESH MATERIALIZED VIEW CONCURRENTLY</command> as it requires
+      a populated materialized view.
+     </para>
     </listitem>
    </varlistentry>
 
diff --git a/src/backend/commands/createas.c b/src/backend/commands/createas.c
index c5d78252a1..e2948ac966 100644
--- a/src/backend/commands/createas.c
+++ b/src/backend/commands/createas.c
@@ -334,18 +334,26 @@ ExecCreateTableAs(ParseState *pstate, CreateTableAsStmt *stmt,
 		/* An existing materialized view can be replaced. */
 		if (is_matview && into->replace)
 		{
-			RefreshMatViewStmt *refresh;
-
 			/* Change the relation to match the new query and other options. */
-			(void) create_ctas_nodata(query->targetList, into);
+			address = create_ctas_nodata(query->targetList, into);
 
-			/* Refresh the materialized view with a fake statement. */
-			refresh = makeNode(RefreshMatViewStmt);
-			refresh->relation = into->rel;
-			refresh->skipData = into->skipData;
-			refresh->concurrent = false;
+			/*
+			 * Refresh the materialized view with a fake statement unless we
+			 * must keep the old data.
+			 */
+			if (!into->keepData)
+			{
+				RefreshMatViewStmt *refresh;
+
+				refresh = makeNode(RefreshMatViewStmt);
+				refresh->relation = into->rel;
+				refresh->skipData = into->skipData;
+				refresh->concurrent = false;
+
+				address = ExecRefreshMatView(refresh, NULL, NULL, NULL);
+			}
 
-			return ExecRefreshMatView(refresh, NULL, NULL, NULL);
+			return address;
 		}
 
 		return InvalidObjectAddress;
diff --git a/src/backend/parser/gram.y b/src/backend/parser/gram.y
index b1100bdec1..0647955005 100644
--- a/src/backend/parser/gram.y
+++ b/src/backend/parser/gram.y
@@ -4860,6 +4860,22 @@ CreateMatViewStmt:
 					$7->replace = true;
 					$$ = (Node *) ctas;
 				}
+		| CREATE OR REPLACE OptNoLog MATERIALIZED VIEW create_mv_target AS SelectStmt WITH OLD DATA_P
+				{
+					CreateTableAsStmt *ctas = makeNode(CreateTableAsStmt);
+
+					ctas->query = $9;
+					ctas->into = $7;
+					ctas->objtype = OBJECT_MATVIEW;
+					ctas->is_select_into = false;
+					ctas->if_not_exists = false;
+					/* cram additional flags into the IntoClause */
+					$7->rel->relpersistence = $4;
+					$7->skipData = false;
+					$7->keepData = true;
+					$7->replace = true;
+					$$ = (Node *) ctas;
+				}
 		;
 
 create_mv_target:
diff --git a/src/include/nodes/primnodes.h b/src/include/nodes/primnodes.h
index 4b0ee5d10d..ae84cb522e 100644
--- a/src/include/nodes/primnodes.h
+++ b/src/include/nodes/primnodes.h
@@ -168,6 +168,7 @@ typedef struct IntoClause
 	/* materialized view's SELECT query */
 	Node	   *viewQuery pg_node_attr(query_jumble_ignore);
 	bool		skipData;		/* true for WITH NO DATA */
+	bool		keepData;		/* true for WITH OLD DATA */
 	bool		replace;		/* replace existing matview? */
 } IntoClause;
 
diff --git a/src/test/regress/expected/matview.out b/src/test/regress/expected/matview.out
index cefd0d442c..47dfd88bff 100644
--- a/src/test/regress/expected/matview.out
+++ b/src/test/regress/expected/matview.out
@@ -751,6 +751,23 @@ SELECT * FROM mvtest_replace;
  3
 (1 row)
 
+-- replace query but keep old data
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 5 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+ a 
+---
+ 3
+(1 row)
+
+REFRESH MATERIALIZED VIEW mvtest_replace;
+SELECT * FROM mvtest_replace;
+ a 
+---
+ 5
+(1 row)
+
 -- add column
 CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
   SELECT 4 AS a, 1 b;
@@ -905,3 +922,14 @@ ERROR:  syntax error at or near "NOT"
 LINE 1: CREATE OR REPLACE MATERIALIZED VIEW IF NOT EXISTS mvtest_rep...
                                                ^
 DROP MATERIALIZED VIEW mvtest_replace;
+-- Create new matview WITH OLD DATA.  This populates the new matview as if
+-- WITH DATA had been specified.
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 17 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+ a  
+----
+ 17
+(1 row)
+
diff --git a/src/test/regress/sql/matview.sql b/src/test/regress/sql/matview.sql
index c12f0243c9..b268237c24 100644
--- a/src/test/regress/sql/matview.sql
+++ b/src/test/regress/sql/matview.sql
@@ -338,6 +338,14 @@ SELECT * FROM mvtest_replace; -- error: not populated
 REFRESH MATERIALIZED VIEW mvtest_replace;
 SELECT * FROM mvtest_replace;
 
+-- replace query but keep old data
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 5 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+REFRESH MATERIALIZED VIEW mvtest_replace;
+SELECT * FROM mvtest_replace;
+
 -- add column
 CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
   SELECT 4 AS a, 1 b;
@@ -422,3 +430,10 @@ CREATE OR REPLACE MATERIALIZED VIEW IF NOT EXISTS mvtest_replace AS
   SELECT 1 AS a;
 
 DROP MATERIALIZED VIEW mvtest_replace;
+
+-- Create new matview WITH OLD DATA.  This populates the new matview as if
+-- WITH DATA had been specified.
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 17 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
-- 
2.45.2


--nrp556lrhtfteavd--





^ permalink  raw  reply  [nested|flat] 809+ messages in thread

* [PATCH v3 3/3] Replace matview WITH OLD DATA
@ 2024-07-26 21:33  Erik Wienhold <ewie@ewie.name>
  0 siblings, 0 replies; 809+ messages in thread

From: Erik Wienhold @ 2024-07-26 21:33 UTC (permalink / raw)

---
 .../sgml/ref/create_materialized_view.sgml    | 16 +++++++++--
 src/backend/commands/createas.c               | 26 +++++++++++------
 src/backend/parser/gram.y                     | 16 +++++++++++
 src/include/nodes/primnodes.h                 |  1 +
 src/test/regress/expected/matview.out         | 28 +++++++++++++++++++
 src/test/regress/sql/matview.sql              | 15 ++++++++++
 6 files changed, 90 insertions(+), 12 deletions(-)

diff --git a/doc/src/sgml/ref/create_materialized_view.sgml b/doc/src/sgml/ref/create_materialized_view.sgml
index b5a8e3441a..65633b8bfa 100644
--- a/doc/src/sgml/ref/create_materialized_view.sgml
+++ b/doc/src/sgml/ref/create_materialized_view.sgml
@@ -27,7 +27,7 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
     [ WITH ( <replaceable class="parameter">storage_parameter</replaceable> [= <replaceable class="parameter">value</replaceable>] [, ... ] ) ]
     [ TABLESPACE <replaceable class="parameter">tablespace_name</replaceable> ]
     AS <replaceable>query</replaceable>
-    [ WITH [ NO ] DATA ]
+    [ WITH [ NO | OLD ] DATA ]
 </synopsis>
  </refsynopsisdiv>
 
@@ -37,7 +37,8 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
   <para>
    <command>CREATE MATERIALIZED VIEW</command> defines a materialized view of
    a query.  The query is executed and used to populate the view at the time
-   the command is issued (unless <command>WITH NO DATA</command> is used) and may be
+   the command is issued (unless <command>WITH NO DATA</command> or
+   <command>WITH OLD DATA</command> is used) and may be
    refreshed later using <command>REFRESH MATERIALIZED VIEW</command>.
   </para>
 
@@ -160,7 +161,7 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
    </varlistentry>
 
    <varlistentry>
-    <term><literal>WITH [ NO ] DATA</literal></term>
+    <term><literal>WITH [ NO | OLD ] DATA</literal></term>
     <listitem>
      <para>
       This clause specifies whether or not the materialized view should be
@@ -168,6 +169,15 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
       flagged as unscannable and cannot be queried until <command>REFRESH
       MATERIALIZED VIEW</command> is used.
      </para>
+
+     <para>
+      The form <command>WITH OLD DATA</command> keeps the already stored data
+      when replacing an existing materialized view to keep it populated.  For
+      newly created materialized views, this has the same effect as
+      <command>WITH DATA</command>.  Use this form if you want to use
+      <command>REFRESH MATERIALIZED VIEW CONCURRENTLY</command> as it requires
+      a populated materialized view.
+     </para>
     </listitem>
    </varlistentry>
 
diff --git a/src/backend/commands/createas.c b/src/backend/commands/createas.c
index e4ed3748f9..96e7b81966 100644
--- a/src/backend/commands/createas.c
+++ b/src/backend/commands/createas.c
@@ -331,18 +331,26 @@ ExecCreateTableAs(ParseState *pstate, CreateTableAsStmt *stmt,
 		/* An existing materialized view can be replaced. */
 		if (is_matview && into->replace)
 		{
-			RefreshMatViewStmt *refresh;
-
 			/* Change the relation to match the new query and other options. */
-			(void) create_ctas_nodata(query->targetList, into);
+			address = create_ctas_nodata(query->targetList, into);
 
-			/* Refresh the materialized view with a fake statement. */
-			refresh = makeNode(RefreshMatViewStmt);
-			refresh->relation = into->rel;
-			refresh->skipData = into->skipData;
-			refresh->concurrent = false;
+			/*
+			 * Refresh the materialized view with a fake statement unless we
+			 * must keep the old data.
+			 */
+			if (!into->keepData)
+			{
+				RefreshMatViewStmt *refresh;
+
+				refresh = makeNode(RefreshMatViewStmt);
+				refresh->relation = into->rel;
+				refresh->skipData = into->skipData;
+				refresh->concurrent = false;
+
+				address = ExecRefreshMatView(refresh, NULL, NULL);
+			}
 
-			return ExecRefreshMatView(refresh, NULL, NULL);
+			return address;
 		}
 
 		return InvalidObjectAddress;
diff --git a/src/backend/parser/gram.y b/src/backend/parser/gram.y
index 4b939ea7ca..e45ebb24f8 100644
--- a/src/backend/parser/gram.y
+++ b/src/backend/parser/gram.y
@@ -4808,6 +4808,22 @@ CreateMatViewStmt:
 					$7->replace = true;
 					$$ = (Node *) ctas;
 				}
+		| CREATE OR REPLACE OptNoLog MATERIALIZED VIEW create_mv_target AS SelectStmt WITH OLD DATA_P
+				{
+					CreateTableAsStmt *ctas = makeNode(CreateTableAsStmt);
+
+					ctas->query = $9;
+					ctas->into = $7;
+					ctas->objtype = OBJECT_MATVIEW;
+					ctas->is_select_into = false;
+					ctas->if_not_exists = false;
+					/* cram additional flags into the IntoClause */
+					$7->rel->relpersistence = $4;
+					$7->skipData = false;
+					$7->keepData = true;
+					$7->replace = true;
+					$$ = (Node *) ctas;
+				}
 		;
 
 create_mv_target:
diff --git a/src/include/nodes/primnodes.h b/src/include/nodes/primnodes.h
index 4b0ee5d10d..ae84cb522e 100644
--- a/src/include/nodes/primnodes.h
+++ b/src/include/nodes/primnodes.h
@@ -168,6 +168,7 @@ typedef struct IntoClause
 	/* materialized view's SELECT query */
 	Node	   *viewQuery pg_node_attr(query_jumble_ignore);
 	bool		skipData;		/* true for WITH NO DATA */
+	bool		keepData;		/* true for WITH OLD DATA */
 	bool		replace;		/* replace existing matview? */
 } IntoClause;
 
diff --git a/src/test/regress/expected/matview.out b/src/test/regress/expected/matview.out
index cefd0d442c..47dfd88bff 100644
--- a/src/test/regress/expected/matview.out
+++ b/src/test/regress/expected/matview.out
@@ -751,6 +751,23 @@ SELECT * FROM mvtest_replace;
  3
 (1 row)
 
+-- replace query but keep old data
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 5 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+ a 
+---
+ 3
+(1 row)
+
+REFRESH MATERIALIZED VIEW mvtest_replace;
+SELECT * FROM mvtest_replace;
+ a 
+---
+ 5
+(1 row)
+
 -- add column
 CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
   SELECT 4 AS a, 1 b;
@@ -905,3 +922,14 @@ ERROR:  syntax error at or near "NOT"
 LINE 1: CREATE OR REPLACE MATERIALIZED VIEW IF NOT EXISTS mvtest_rep...
                                                ^
 DROP MATERIALIZED VIEW mvtest_replace;
+-- Create new matview WITH OLD DATA.  This populates the new matview as if
+-- WITH DATA had been specified.
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 17 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+ a  
+----
+ 17
+(1 row)
+
diff --git a/src/test/regress/sql/matview.sql b/src/test/regress/sql/matview.sql
index c12f0243c9..b268237c24 100644
--- a/src/test/regress/sql/matview.sql
+++ b/src/test/regress/sql/matview.sql
@@ -338,6 +338,14 @@ SELECT * FROM mvtest_replace; -- error: not populated
 REFRESH MATERIALIZED VIEW mvtest_replace;
 SELECT * FROM mvtest_replace;
 
+-- replace query but keep old data
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 5 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+REFRESH MATERIALIZED VIEW mvtest_replace;
+SELECT * FROM mvtest_replace;
+
 -- add column
 CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
   SELECT 4 AS a, 1 b;
@@ -422,3 +430,10 @@ CREATE OR REPLACE MATERIALIZED VIEW IF NOT EXISTS mvtest_replace AS
   SELECT 1 AS a;
 
 DROP MATERIALIZED VIEW mvtest_replace;
+
+-- Create new matview WITH OLD DATA.  This populates the new matview as if
+-- WITH DATA had been specified.
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 17 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
-- 
2.46.0


--muysnh7l3kienazz--





^ permalink  raw  reply  [nested|flat] 809+ messages in thread

* [PATCH v4 3/3] Replace matview WITH OLD DATA
@ 2024-07-26 21:33  Erik Wienhold <ewie@ewie.name>
  0 siblings, 0 replies; 809+ messages in thread

From: Erik Wienhold @ 2024-07-26 21:33 UTC (permalink / raw)

---
 .../sgml/ref/create_materialized_view.sgml    | 16 +++++++++--
 src/backend/commands/createas.c               | 26 +++++++++++------
 src/backend/parser/gram.y                     | 16 +++++++++++
 src/include/nodes/primnodes.h                 |  1 +
 src/test/regress/expected/matview.out         | 28 +++++++++++++++++++
 src/test/regress/sql/matview.sql              | 15 ++++++++++
 6 files changed, 90 insertions(+), 12 deletions(-)

diff --git a/doc/src/sgml/ref/create_materialized_view.sgml b/doc/src/sgml/ref/create_materialized_view.sgml
index 5e03320eb7..1352e9de40 100644
--- a/doc/src/sgml/ref/create_materialized_view.sgml
+++ b/doc/src/sgml/ref/create_materialized_view.sgml
@@ -27,7 +27,7 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
     [ WITH ( <replaceable class="parameter">storage_parameter</replaceable> [= <replaceable class="parameter">value</replaceable>] [, ... ] ) ]
     [ TABLESPACE <replaceable class="parameter">tablespace_name</replaceable> ]
     AS <replaceable>query</replaceable>
-    [ WITH [ NO ] DATA ]
+    [ WITH [ NO | OLD ] DATA ]
 </synopsis>
  </refsynopsisdiv>
 
@@ -37,7 +37,8 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
   <para>
    <command>CREATE MATERIALIZED VIEW</command> defines a materialized view of
    a query.  The query is executed and used to populate the view at the time
-   the command is issued (unless <command>WITH NO DATA</command> is used) and may be
+   the command is issued (unless <command>WITH NO DATA</command> or
+   <command>WITH OLD DATA</command> is used) and may be
    refreshed later using <command>REFRESH MATERIALIZED VIEW</command>.
   </para>
 
@@ -162,7 +163,7 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
    </varlistentry>
 
    <varlistentry>
-    <term><literal>WITH [ NO ] DATA</literal></term>
+    <term><literal>WITH [ NO | OLD ] DATA</literal></term>
     <listitem>
      <para>
       This clause specifies whether or not the materialized view should be
@@ -170,6 +171,15 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
       flagged as unscannable and cannot be queried until <command>REFRESH
       MATERIALIZED VIEW</command> is used.
      </para>
+
+     <para>
+      The form <command>WITH OLD DATA</command> keeps the already stored data
+      when replacing an existing materialized view to keep it populated.  For
+      newly created materialized views, this has the same effect as
+      <command>WITH DATA</command>.  Use this form if you want to use
+      <command>REFRESH MATERIALIZED VIEW CONCURRENTLY</command> as it requires
+      a populated materialized view.
+     </para>
     </listitem>
    </varlistentry>
 
diff --git a/src/backend/commands/createas.c b/src/backend/commands/createas.c
index d4bc5e5c08..8db000554c 100644
--- a/src/backend/commands/createas.c
+++ b/src/backend/commands/createas.c
@@ -332,18 +332,26 @@ ExecCreateTableAs(ParseState *pstate, CreateTableAsStmt *stmt,
 		/* An existing materialized view can be replaced. */
 		if (is_matview && into->replace)
 		{
-			RefreshMatViewStmt *refresh;
-
 			/* Change the relation to match the new query and other options. */
-			(void) create_ctas_nodata(query->targetList, into);
+			address = create_ctas_nodata(query->targetList, into);
 
-			/* Refresh the materialized view with a fake statement. */
-			refresh = makeNode(RefreshMatViewStmt);
-			refresh->relation = into->rel;
-			refresh->skipData = into->skipData;
-			refresh->concurrent = false;
+			/*
+			 * Refresh the materialized view with a fake statement unless we
+			 * must keep the old data.
+			 */
+			if (!into->keepData)
+			{
+				RefreshMatViewStmt *refresh;
+
+				refresh = makeNode(RefreshMatViewStmt);
+				refresh->relation = into->rel;
+				refresh->skipData = into->skipData;
+				refresh->concurrent = false;
+
+				address = ExecRefreshMatView(refresh, NULL, NULL);
+			}
 
-			return ExecRefreshMatView(refresh, NULL, NULL);
+			return address;
 		}
 
 		return InvalidObjectAddress;
diff --git a/src/backend/parser/gram.y b/src/backend/parser/gram.y
index dadc6b630a..1be1a95cd9 100644
--- a/src/backend/parser/gram.y
+++ b/src/backend/parser/gram.y
@@ -4838,6 +4838,22 @@ CreateMatViewStmt:
 					$7->replace = true;
 					$$ = (Node *) ctas;
 				}
+		| CREATE OR REPLACE OptNoLog MATERIALIZED VIEW create_mv_target AS SelectStmt WITH OLD DATA_P
+				{
+					CreateTableAsStmt *ctas = makeNode(CreateTableAsStmt);
+
+					ctas->query = $9;
+					ctas->into = $7;
+					ctas->objtype = OBJECT_MATVIEW;
+					ctas->is_select_into = false;
+					ctas->if_not_exists = false;
+					/* cram additional flags into the IntoClause */
+					$7->rel->relpersistence = $4;
+					$7->skipData = false;
+					$7->keepData = true;
+					$7->replace = true;
+					$$ = (Node *) ctas;
+				}
 		;
 
 create_mv_target:
diff --git a/src/include/nodes/primnodes.h b/src/include/nodes/primnodes.h
index 533fa847ab..6fa3291c64 100644
--- a/src/include/nodes/primnodes.h
+++ b/src/include/nodes/primnodes.h
@@ -168,6 +168,7 @@ typedef struct IntoClause
 	/* materialized view's SELECT query */
 	struct Query *viewQuery pg_node_attr(query_jumble_ignore);
 	bool		skipData;		/* true for WITH NO DATA */
+	bool		keepData;		/* true for WITH OLD DATA */
 	bool		replace;		/* replace existing matview? */
 } IntoClause;
 
diff --git a/src/test/regress/expected/matview.out b/src/test/regress/expected/matview.out
index cefd0d442c..47dfd88bff 100644
--- a/src/test/regress/expected/matview.out
+++ b/src/test/regress/expected/matview.out
@@ -751,6 +751,23 @@ SELECT * FROM mvtest_replace;
  3
 (1 row)
 
+-- replace query but keep old data
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 5 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+ a 
+---
+ 3
+(1 row)
+
+REFRESH MATERIALIZED VIEW mvtest_replace;
+SELECT * FROM mvtest_replace;
+ a 
+---
+ 5
+(1 row)
+
 -- add column
 CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
   SELECT 4 AS a, 1 b;
@@ -905,3 +922,14 @@ ERROR:  syntax error at or near "NOT"
 LINE 1: CREATE OR REPLACE MATERIALIZED VIEW IF NOT EXISTS mvtest_rep...
                                                ^
 DROP MATERIALIZED VIEW mvtest_replace;
+-- Create new matview WITH OLD DATA.  This populates the new matview as if
+-- WITH DATA had been specified.
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 17 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+ a  
+----
+ 17
+(1 row)
+
diff --git a/src/test/regress/sql/matview.sql b/src/test/regress/sql/matview.sql
index c12f0243c9..b268237c24 100644
--- a/src/test/regress/sql/matview.sql
+++ b/src/test/regress/sql/matview.sql
@@ -338,6 +338,14 @@ SELECT * FROM mvtest_replace; -- error: not populated
 REFRESH MATERIALIZED VIEW mvtest_replace;
 SELECT * FROM mvtest_replace;
 
+-- replace query but keep old data
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 5 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+REFRESH MATERIALIZED VIEW mvtest_replace;
+SELECT * FROM mvtest_replace;
+
 -- add column
 CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
   SELECT 4 AS a, 1 b;
@@ -422,3 +430,10 @@ CREATE OR REPLACE MATERIALIZED VIEW IF NOT EXISTS mvtest_replace AS
   SELECT 1 AS a;
 
 DROP MATERIALIZED VIEW mvtest_replace;
+
+-- Create new matview WITH OLD DATA.  This populates the new matview as if
+-- WITH DATA had been specified.
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 17 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
-- 
2.47.0


--hht4bymbvbva5al5--





^ permalink  raw  reply  [nested|flat] 809+ messages in thread

* [PATCH v6 3/3] Replace matview WITH OLD DATA
@ 2024-07-26 21:33  Erik Wienhold <ewie@ewie.name>
  0 siblings, 0 replies; 809+ messages in thread

From: Erik Wienhold @ 2024-07-26 21:33 UTC (permalink / raw)

---
 .../sgml/ref/create_materialized_view.sgml    | 16 +++++++++--
 src/backend/commands/createas.c               | 26 +++++++++++------
 src/backend/parser/gram.y                     | 16 +++++++++++
 src/include/nodes/primnodes.h                 |  1 +
 src/test/regress/expected/matview.out         | 28 +++++++++++++++++++
 src/test/regress/sql/matview.sql              | 15 ++++++++++
 6 files changed, 90 insertions(+), 12 deletions(-)

diff --git a/doc/src/sgml/ref/create_materialized_view.sgml b/doc/src/sgml/ref/create_materialized_view.sgml
index 5e03320eb73..1352e9de409 100644
--- a/doc/src/sgml/ref/create_materialized_view.sgml
+++ b/doc/src/sgml/ref/create_materialized_view.sgml
@@ -27,7 +27,7 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
     [ WITH ( <replaceable class="parameter">storage_parameter</replaceable> [= <replaceable class="parameter">value</replaceable>] [, ... ] ) ]
     [ TABLESPACE <replaceable class="parameter">tablespace_name</replaceable> ]
     AS <replaceable>query</replaceable>
-    [ WITH [ NO ] DATA ]
+    [ WITH [ NO | OLD ] DATA ]
 </synopsis>
  </refsynopsisdiv>
 
@@ -37,7 +37,8 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
   <para>
    <command>CREATE MATERIALIZED VIEW</command> defines a materialized view of
    a query.  The query is executed and used to populate the view at the time
-   the command is issued (unless <command>WITH NO DATA</command> is used) and may be
+   the command is issued (unless <command>WITH NO DATA</command> or
+   <command>WITH OLD DATA</command> is used) and may be
    refreshed later using <command>REFRESH MATERIALIZED VIEW</command>.
   </para>
 
@@ -162,7 +163,7 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
    </varlistentry>
 
    <varlistentry>
-    <term><literal>WITH [ NO ] DATA</literal></term>
+    <term><literal>WITH [ NO | OLD ] DATA</literal></term>
     <listitem>
      <para>
       This clause specifies whether or not the materialized view should be
@@ -170,6 +171,15 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
       flagged as unscannable and cannot be queried until <command>REFRESH
       MATERIALIZED VIEW</command> is used.
      </para>
+
+     <para>
+      The form <command>WITH OLD DATA</command> keeps the already stored data
+      when replacing an existing materialized view to keep it populated.  For
+      newly created materialized views, this has the same effect as
+      <command>WITH DATA</command>.  Use this form if you want to use
+      <command>REFRESH MATERIALIZED VIEW CONCURRENTLY</command> as it requires
+      a populated materialized view.
+     </para>
     </listitem>
    </varlistentry>
 
diff --git a/src/backend/commands/createas.c b/src/backend/commands/createas.c
index 9f37ed7f177..0ed44b246bd 100644
--- a/src/backend/commands/createas.c
+++ b/src/backend/commands/createas.c
@@ -332,18 +332,26 @@ ExecCreateTableAs(ParseState *pstate, CreateTableAsStmt *stmt,
 		/* An existing materialized view can be replaced. */
 		if (is_matview && into->replace)
 		{
-			RefreshMatViewStmt *refresh;
-
 			/* Change the relation to match the new query and other options. */
-			(void) create_ctas_nodata(query->targetList, into);
+			address = create_ctas_nodata(query->targetList, into);
 
-			/* Refresh the materialized view with a fake statement. */
-			refresh = makeNode(RefreshMatViewStmt);
-			refresh->relation = into->rel;
-			refresh->skipData = into->skipData;
-			refresh->concurrent = false;
+			/*
+			 * Refresh the materialized view with a fake statement unless we
+			 * must keep the old data.
+			 */
+			if (!into->keepData)
+			{
+				RefreshMatViewStmt *refresh;
+
+				refresh = makeNode(RefreshMatViewStmt);
+				refresh->relation = into->rel;
+				refresh->skipData = into->skipData;
+				refresh->concurrent = false;
+
+				address = ExecRefreshMatView(refresh, pstate->p_sourcetext, qc);
+			}
 
-			return ExecRefreshMatView(refresh, pstate->p_sourcetext, qc);
+			return address;
 		}
 
 		return InvalidObjectAddress;
diff --git a/src/backend/parser/gram.y b/src/backend/parser/gram.y
index 8be790eaccf..e405268f413 100644
--- a/src/backend/parser/gram.y
+++ b/src/backend/parser/gram.y
@@ -4924,6 +4924,22 @@ CreateMatViewStmt:
 					$7->replace = true;
 					$$ = (Node *) ctas;
 				}
+		| CREATE OR REPLACE OptNoLog MATERIALIZED VIEW create_mv_target AS SelectStmt WITH OLD DATA_P
+				{
+					CreateTableAsStmt *ctas = makeNode(CreateTableAsStmt);
+
+					ctas->query = $9;
+					ctas->into = $7;
+					ctas->objtype = OBJECT_MATVIEW;
+					ctas->is_select_into = false;
+					ctas->if_not_exists = false;
+					/* cram additional flags into the IntoClause */
+					$7->rel->relpersistence = $4;
+					$7->skipData = false;
+					$7->keepData = true;
+					$7->replace = true;
+					$$ = (Node *) ctas;
+				}
 		;
 
 create_mv_target:
diff --git a/src/include/nodes/primnodes.h b/src/include/nodes/primnodes.h
index e800d13a6e0..5290e6c0e8a 100644
--- a/src/include/nodes/primnodes.h
+++ b/src/include/nodes/primnodes.h
@@ -169,6 +169,7 @@ typedef struct IntoClause
 	/* materialized view's SELECT query */
 	struct Query *viewQuery pg_node_attr(query_jumble_ignore);
 	bool		skipData;		/* true for WITH NO DATA */
+	bool		keepData;		/* true for WITH OLD DATA */
 	bool		replace;		/* replace existing matview? */
 } IntoClause;
 
diff --git a/src/test/regress/expected/matview.out b/src/test/regress/expected/matview.out
index d4b42da1ddf..f0f52dd1c6c 100644
--- a/src/test/regress/expected/matview.out
+++ b/src/test/regress/expected/matview.out
@@ -751,6 +751,23 @@ SELECT * FROM mvtest_replace;
  3
 (1 row)
 
+-- replace query but keep old data
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 5 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+ a 
+---
+ 3
+(1 row)
+
+REFRESH MATERIALIZED VIEW mvtest_replace;
+SELECT * FROM mvtest_replace;
+ a 
+---
+ 5
+(1 row)
+
 -- add column
 CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
   SELECT 4 AS a, 1 b;
@@ -905,3 +922,14 @@ ERROR:  syntax error at or near "NOT"
 LINE 1: CREATE OR REPLACE MATERIALIZED VIEW IF NOT EXISTS mvtest_rep...
                                                ^
 DROP MATERIALIZED VIEW mvtest_replace;
+-- Create new matview WITH OLD DATA.  This populates the new matview as if
+-- WITH DATA had been specified.
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 17 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+ a  
+----
+ 17
+(1 row)
+
diff --git a/src/test/regress/sql/matview.sql b/src/test/regress/sql/matview.sql
index d6a4dc4b857..91f547e9cb8 100644
--- a/src/test/regress/sql/matview.sql
+++ b/src/test/regress/sql/matview.sql
@@ -338,6 +338,14 @@ SELECT * FROM mvtest_replace; -- error: not populated
 REFRESH MATERIALIZED VIEW mvtest_replace;
 SELECT * FROM mvtest_replace;
 
+-- replace query but keep old data
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 5 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+REFRESH MATERIALIZED VIEW mvtest_replace;
+SELECT * FROM mvtest_replace;
+
 -- add column
 CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
   SELECT 4 AS a, 1 b;
@@ -422,3 +430,10 @@ CREATE OR REPLACE MATERIALIZED VIEW IF NOT EXISTS mvtest_replace AS
   SELECT 1 AS a;
 
 DROP MATERIALIZED VIEW mvtest_replace;
+
+-- Create new matview WITH OLD DATA.  This populates the new matview as if
+-- WITH DATA had been specified.
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 17 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
-- 
2.48.1


--aewcrbystcgftlni--





^ permalink  raw  reply  [nested|flat] 809+ messages in thread

* [PATCH v3 3/3] Replace matview WITH OLD DATA
@ 2024-07-26 21:33  Erik Wienhold <ewie@ewie.name>
  0 siblings, 0 replies; 809+ messages in thread

From: Erik Wienhold @ 2024-07-26 21:33 UTC (permalink / raw)

---
 .../sgml/ref/create_materialized_view.sgml    | 16 +++++++++--
 src/backend/commands/createas.c               | 26 +++++++++++------
 src/backend/parser/gram.y                     | 16 +++++++++++
 src/include/nodes/primnodes.h                 |  1 +
 src/test/regress/expected/matview.out         | 28 +++++++++++++++++++
 src/test/regress/sql/matview.sql              | 15 ++++++++++
 6 files changed, 90 insertions(+), 12 deletions(-)

diff --git a/doc/src/sgml/ref/create_materialized_view.sgml b/doc/src/sgml/ref/create_materialized_view.sgml
index b5a8e3441a..65633b8bfa 100644
--- a/doc/src/sgml/ref/create_materialized_view.sgml
+++ b/doc/src/sgml/ref/create_materialized_view.sgml
@@ -27,7 +27,7 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
     [ WITH ( <replaceable class="parameter">storage_parameter</replaceable> [= <replaceable class="parameter">value</replaceable>] [, ... ] ) ]
     [ TABLESPACE <replaceable class="parameter">tablespace_name</replaceable> ]
     AS <replaceable>query</replaceable>
-    [ WITH [ NO ] DATA ]
+    [ WITH [ NO | OLD ] DATA ]
 </synopsis>
  </refsynopsisdiv>
 
@@ -37,7 +37,8 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
   <para>
    <command>CREATE MATERIALIZED VIEW</command> defines a materialized view of
    a query.  The query is executed and used to populate the view at the time
-   the command is issued (unless <command>WITH NO DATA</command> is used) and may be
+   the command is issued (unless <command>WITH NO DATA</command> or
+   <command>WITH OLD DATA</command> is used) and may be
    refreshed later using <command>REFRESH MATERIALIZED VIEW</command>.
   </para>
 
@@ -160,7 +161,7 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
    </varlistentry>
 
    <varlistentry>
-    <term><literal>WITH [ NO ] DATA</literal></term>
+    <term><literal>WITH [ NO | OLD ] DATA</literal></term>
     <listitem>
      <para>
       This clause specifies whether or not the materialized view should be
@@ -168,6 +169,15 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
       flagged as unscannable and cannot be queried until <command>REFRESH
       MATERIALIZED VIEW</command> is used.
      </para>
+
+     <para>
+      The form <command>WITH OLD DATA</command> keeps the already stored data
+      when replacing an existing materialized view to keep it populated.  For
+      newly created materialized views, this has the same effect as
+      <command>WITH DATA</command>.  Use this form if you want to use
+      <command>REFRESH MATERIALIZED VIEW CONCURRENTLY</command> as it requires
+      a populated materialized view.
+     </para>
     </listitem>
    </varlistentry>
 
diff --git a/src/backend/commands/createas.c b/src/backend/commands/createas.c
index e4ed3748f9..96e7b81966 100644
--- a/src/backend/commands/createas.c
+++ b/src/backend/commands/createas.c
@@ -331,18 +331,26 @@ ExecCreateTableAs(ParseState *pstate, CreateTableAsStmt *stmt,
 		/* An existing materialized view can be replaced. */
 		if (is_matview && into->replace)
 		{
-			RefreshMatViewStmt *refresh;
-
 			/* Change the relation to match the new query and other options. */
-			(void) create_ctas_nodata(query->targetList, into);
+			address = create_ctas_nodata(query->targetList, into);
 
-			/* Refresh the materialized view with a fake statement. */
-			refresh = makeNode(RefreshMatViewStmt);
-			refresh->relation = into->rel;
-			refresh->skipData = into->skipData;
-			refresh->concurrent = false;
+			/*
+			 * Refresh the materialized view with a fake statement unless we
+			 * must keep the old data.
+			 */
+			if (!into->keepData)
+			{
+				RefreshMatViewStmt *refresh;
+
+				refresh = makeNode(RefreshMatViewStmt);
+				refresh->relation = into->rel;
+				refresh->skipData = into->skipData;
+				refresh->concurrent = false;
+
+				address = ExecRefreshMatView(refresh, NULL, NULL);
+			}
 
-			return ExecRefreshMatView(refresh, NULL, NULL);
+			return address;
 		}
 
 		return InvalidObjectAddress;
diff --git a/src/backend/parser/gram.y b/src/backend/parser/gram.y
index 4b939ea7ca..e45ebb24f8 100644
--- a/src/backend/parser/gram.y
+++ b/src/backend/parser/gram.y
@@ -4808,6 +4808,22 @@ CreateMatViewStmt:
 					$7->replace = true;
 					$$ = (Node *) ctas;
 				}
+		| CREATE OR REPLACE OptNoLog MATERIALIZED VIEW create_mv_target AS SelectStmt WITH OLD DATA_P
+				{
+					CreateTableAsStmt *ctas = makeNode(CreateTableAsStmt);
+
+					ctas->query = $9;
+					ctas->into = $7;
+					ctas->objtype = OBJECT_MATVIEW;
+					ctas->is_select_into = false;
+					ctas->if_not_exists = false;
+					/* cram additional flags into the IntoClause */
+					$7->rel->relpersistence = $4;
+					$7->skipData = false;
+					$7->keepData = true;
+					$7->replace = true;
+					$$ = (Node *) ctas;
+				}
 		;
 
 create_mv_target:
diff --git a/src/include/nodes/primnodes.h b/src/include/nodes/primnodes.h
index 4b0ee5d10d..ae84cb522e 100644
--- a/src/include/nodes/primnodes.h
+++ b/src/include/nodes/primnodes.h
@@ -168,6 +168,7 @@ typedef struct IntoClause
 	/* materialized view's SELECT query */
 	Node	   *viewQuery pg_node_attr(query_jumble_ignore);
 	bool		skipData;		/* true for WITH NO DATA */
+	bool		keepData;		/* true for WITH OLD DATA */
 	bool		replace;		/* replace existing matview? */
 } IntoClause;
 
diff --git a/src/test/regress/expected/matview.out b/src/test/regress/expected/matview.out
index cefd0d442c..47dfd88bff 100644
--- a/src/test/regress/expected/matview.out
+++ b/src/test/regress/expected/matview.out
@@ -751,6 +751,23 @@ SELECT * FROM mvtest_replace;
  3
 (1 row)
 
+-- replace query but keep old data
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 5 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+ a 
+---
+ 3
+(1 row)
+
+REFRESH MATERIALIZED VIEW mvtest_replace;
+SELECT * FROM mvtest_replace;
+ a 
+---
+ 5
+(1 row)
+
 -- add column
 CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
   SELECT 4 AS a, 1 b;
@@ -905,3 +922,14 @@ ERROR:  syntax error at or near "NOT"
 LINE 1: CREATE OR REPLACE MATERIALIZED VIEW IF NOT EXISTS mvtest_rep...
                                                ^
 DROP MATERIALIZED VIEW mvtest_replace;
+-- Create new matview WITH OLD DATA.  This populates the new matview as if
+-- WITH DATA had been specified.
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 17 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+ a  
+----
+ 17
+(1 row)
+
diff --git a/src/test/regress/sql/matview.sql b/src/test/regress/sql/matview.sql
index c12f0243c9..b268237c24 100644
--- a/src/test/regress/sql/matview.sql
+++ b/src/test/regress/sql/matview.sql
@@ -338,6 +338,14 @@ SELECT * FROM mvtest_replace; -- error: not populated
 REFRESH MATERIALIZED VIEW mvtest_replace;
 SELECT * FROM mvtest_replace;
 
+-- replace query but keep old data
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 5 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+REFRESH MATERIALIZED VIEW mvtest_replace;
+SELECT * FROM mvtest_replace;
+
 -- add column
 CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
   SELECT 4 AS a, 1 b;
@@ -422,3 +430,10 @@ CREATE OR REPLACE MATERIALIZED VIEW IF NOT EXISTS mvtest_replace AS
   SELECT 1 AS a;
 
 DROP MATERIALIZED VIEW mvtest_replace;
+
+-- Create new matview WITH OLD DATA.  This populates the new matview as if
+-- WITH DATA had been specified.
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 17 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
-- 
2.46.0


--muysnh7l3kienazz--





^ permalink  raw  reply  [nested|flat] 809+ messages in thread

* [PATCH v4 3/3] Replace matview WITH OLD DATA
@ 2024-07-26 21:33  Erik Wienhold <ewie@ewie.name>
  0 siblings, 0 replies; 809+ messages in thread

From: Erik Wienhold @ 2024-07-26 21:33 UTC (permalink / raw)

---
 .../sgml/ref/create_materialized_view.sgml    | 16 +++++++++--
 src/backend/commands/createas.c               | 26 +++++++++++------
 src/backend/parser/gram.y                     | 16 +++++++++++
 src/include/nodes/primnodes.h                 |  1 +
 src/test/regress/expected/matview.out         | 28 +++++++++++++++++++
 src/test/regress/sql/matview.sql              | 15 ++++++++++
 6 files changed, 90 insertions(+), 12 deletions(-)

diff --git a/doc/src/sgml/ref/create_materialized_view.sgml b/doc/src/sgml/ref/create_materialized_view.sgml
index 5e03320eb7..1352e9de40 100644
--- a/doc/src/sgml/ref/create_materialized_view.sgml
+++ b/doc/src/sgml/ref/create_materialized_view.sgml
@@ -27,7 +27,7 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
     [ WITH ( <replaceable class="parameter">storage_parameter</replaceable> [= <replaceable class="parameter">value</replaceable>] [, ... ] ) ]
     [ TABLESPACE <replaceable class="parameter">tablespace_name</replaceable> ]
     AS <replaceable>query</replaceable>
-    [ WITH [ NO ] DATA ]
+    [ WITH [ NO | OLD ] DATA ]
 </synopsis>
  </refsynopsisdiv>
 
@@ -37,7 +37,8 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
   <para>
    <command>CREATE MATERIALIZED VIEW</command> defines a materialized view of
    a query.  The query is executed and used to populate the view at the time
-   the command is issued (unless <command>WITH NO DATA</command> is used) and may be
+   the command is issued (unless <command>WITH NO DATA</command> or
+   <command>WITH OLD DATA</command> is used) and may be
    refreshed later using <command>REFRESH MATERIALIZED VIEW</command>.
   </para>
 
@@ -162,7 +163,7 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
    </varlistentry>
 
    <varlistentry>
-    <term><literal>WITH [ NO ] DATA</literal></term>
+    <term><literal>WITH [ NO | OLD ] DATA</literal></term>
     <listitem>
      <para>
       This clause specifies whether or not the materialized view should be
@@ -170,6 +171,15 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
       flagged as unscannable and cannot be queried until <command>REFRESH
       MATERIALIZED VIEW</command> is used.
      </para>
+
+     <para>
+      The form <command>WITH OLD DATA</command> keeps the already stored data
+      when replacing an existing materialized view to keep it populated.  For
+      newly created materialized views, this has the same effect as
+      <command>WITH DATA</command>.  Use this form if you want to use
+      <command>REFRESH MATERIALIZED VIEW CONCURRENTLY</command> as it requires
+      a populated materialized view.
+     </para>
     </listitem>
    </varlistentry>
 
diff --git a/src/backend/commands/createas.c b/src/backend/commands/createas.c
index d4bc5e5c08..8db000554c 100644
--- a/src/backend/commands/createas.c
+++ b/src/backend/commands/createas.c
@@ -332,18 +332,26 @@ ExecCreateTableAs(ParseState *pstate, CreateTableAsStmt *stmt,
 		/* An existing materialized view can be replaced. */
 		if (is_matview && into->replace)
 		{
-			RefreshMatViewStmt *refresh;
-
 			/* Change the relation to match the new query and other options. */
-			(void) create_ctas_nodata(query->targetList, into);
+			address = create_ctas_nodata(query->targetList, into);
 
-			/* Refresh the materialized view with a fake statement. */
-			refresh = makeNode(RefreshMatViewStmt);
-			refresh->relation = into->rel;
-			refresh->skipData = into->skipData;
-			refresh->concurrent = false;
+			/*
+			 * Refresh the materialized view with a fake statement unless we
+			 * must keep the old data.
+			 */
+			if (!into->keepData)
+			{
+				RefreshMatViewStmt *refresh;
+
+				refresh = makeNode(RefreshMatViewStmt);
+				refresh->relation = into->rel;
+				refresh->skipData = into->skipData;
+				refresh->concurrent = false;
+
+				address = ExecRefreshMatView(refresh, NULL, NULL);
+			}
 
-			return ExecRefreshMatView(refresh, NULL, NULL);
+			return address;
 		}
 
 		return InvalidObjectAddress;
diff --git a/src/backend/parser/gram.y b/src/backend/parser/gram.y
index dadc6b630a..1be1a95cd9 100644
--- a/src/backend/parser/gram.y
+++ b/src/backend/parser/gram.y
@@ -4838,6 +4838,22 @@ CreateMatViewStmt:
 					$7->replace = true;
 					$$ = (Node *) ctas;
 				}
+		| CREATE OR REPLACE OptNoLog MATERIALIZED VIEW create_mv_target AS SelectStmt WITH OLD DATA_P
+				{
+					CreateTableAsStmt *ctas = makeNode(CreateTableAsStmt);
+
+					ctas->query = $9;
+					ctas->into = $7;
+					ctas->objtype = OBJECT_MATVIEW;
+					ctas->is_select_into = false;
+					ctas->if_not_exists = false;
+					/* cram additional flags into the IntoClause */
+					$7->rel->relpersistence = $4;
+					$7->skipData = false;
+					$7->keepData = true;
+					$7->replace = true;
+					$$ = (Node *) ctas;
+				}
 		;
 
 create_mv_target:
diff --git a/src/include/nodes/primnodes.h b/src/include/nodes/primnodes.h
index 533fa847ab..6fa3291c64 100644
--- a/src/include/nodes/primnodes.h
+++ b/src/include/nodes/primnodes.h
@@ -168,6 +168,7 @@ typedef struct IntoClause
 	/* materialized view's SELECT query */
 	struct Query *viewQuery pg_node_attr(query_jumble_ignore);
 	bool		skipData;		/* true for WITH NO DATA */
+	bool		keepData;		/* true for WITH OLD DATA */
 	bool		replace;		/* replace existing matview? */
 } IntoClause;
 
diff --git a/src/test/regress/expected/matview.out b/src/test/regress/expected/matview.out
index cefd0d442c..47dfd88bff 100644
--- a/src/test/regress/expected/matview.out
+++ b/src/test/regress/expected/matview.out
@@ -751,6 +751,23 @@ SELECT * FROM mvtest_replace;
  3
 (1 row)
 
+-- replace query but keep old data
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 5 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+ a 
+---
+ 3
+(1 row)
+
+REFRESH MATERIALIZED VIEW mvtest_replace;
+SELECT * FROM mvtest_replace;
+ a 
+---
+ 5
+(1 row)
+
 -- add column
 CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
   SELECT 4 AS a, 1 b;
@@ -905,3 +922,14 @@ ERROR:  syntax error at or near "NOT"
 LINE 1: CREATE OR REPLACE MATERIALIZED VIEW IF NOT EXISTS mvtest_rep...
                                                ^
 DROP MATERIALIZED VIEW mvtest_replace;
+-- Create new matview WITH OLD DATA.  This populates the new matview as if
+-- WITH DATA had been specified.
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 17 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+ a  
+----
+ 17
+(1 row)
+
diff --git a/src/test/regress/sql/matview.sql b/src/test/regress/sql/matview.sql
index c12f0243c9..b268237c24 100644
--- a/src/test/regress/sql/matview.sql
+++ b/src/test/regress/sql/matview.sql
@@ -338,6 +338,14 @@ SELECT * FROM mvtest_replace; -- error: not populated
 REFRESH MATERIALIZED VIEW mvtest_replace;
 SELECT * FROM mvtest_replace;
 
+-- replace query but keep old data
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 5 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+REFRESH MATERIALIZED VIEW mvtest_replace;
+SELECT * FROM mvtest_replace;
+
 -- add column
 CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
   SELECT 4 AS a, 1 b;
@@ -422,3 +430,10 @@ CREATE OR REPLACE MATERIALIZED VIEW IF NOT EXISTS mvtest_replace AS
   SELECT 1 AS a;
 
 DROP MATERIALIZED VIEW mvtest_replace;
+
+-- Create new matview WITH OLD DATA.  This populates the new matview as if
+-- WITH DATA had been specified.
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 17 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
-- 
2.47.0


--hht4bymbvbva5al5--





^ permalink  raw  reply  [nested|flat] 809+ messages in thread

* [PATCH v6 3/3] Replace matview WITH OLD DATA
@ 2024-07-26 21:33  Erik Wienhold <ewie@ewie.name>
  0 siblings, 0 replies; 809+ messages in thread

From: Erik Wienhold @ 2024-07-26 21:33 UTC (permalink / raw)

---
 .../sgml/ref/create_materialized_view.sgml    | 16 +++++++++--
 src/backend/commands/createas.c               | 26 +++++++++++------
 src/backend/parser/gram.y                     | 16 +++++++++++
 src/include/nodes/primnodes.h                 |  1 +
 src/test/regress/expected/matview.out         | 28 +++++++++++++++++++
 src/test/regress/sql/matview.sql              | 15 ++++++++++
 6 files changed, 90 insertions(+), 12 deletions(-)

diff --git a/doc/src/sgml/ref/create_materialized_view.sgml b/doc/src/sgml/ref/create_materialized_view.sgml
index 5e03320eb73..1352e9de409 100644
--- a/doc/src/sgml/ref/create_materialized_view.sgml
+++ b/doc/src/sgml/ref/create_materialized_view.sgml
@@ -27,7 +27,7 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
     [ WITH ( <replaceable class="parameter">storage_parameter</replaceable> [= <replaceable class="parameter">value</replaceable>] [, ... ] ) ]
     [ TABLESPACE <replaceable class="parameter">tablespace_name</replaceable> ]
     AS <replaceable>query</replaceable>
-    [ WITH [ NO ] DATA ]
+    [ WITH [ NO | OLD ] DATA ]
 </synopsis>
  </refsynopsisdiv>
 
@@ -37,7 +37,8 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
   <para>
    <command>CREATE MATERIALIZED VIEW</command> defines a materialized view of
    a query.  The query is executed and used to populate the view at the time
-   the command is issued (unless <command>WITH NO DATA</command> is used) and may be
+   the command is issued (unless <command>WITH NO DATA</command> or
+   <command>WITH OLD DATA</command> is used) and may be
    refreshed later using <command>REFRESH MATERIALIZED VIEW</command>.
   </para>
 
@@ -162,7 +163,7 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
    </varlistentry>
 
    <varlistentry>
-    <term><literal>WITH [ NO ] DATA</literal></term>
+    <term><literal>WITH [ NO | OLD ] DATA</literal></term>
     <listitem>
      <para>
       This clause specifies whether or not the materialized view should be
@@ -170,6 +171,15 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
       flagged as unscannable and cannot be queried until <command>REFRESH
       MATERIALIZED VIEW</command> is used.
      </para>
+
+     <para>
+      The form <command>WITH OLD DATA</command> keeps the already stored data
+      when replacing an existing materialized view to keep it populated.  For
+      newly created materialized views, this has the same effect as
+      <command>WITH DATA</command>.  Use this form if you want to use
+      <command>REFRESH MATERIALIZED VIEW CONCURRENTLY</command> as it requires
+      a populated materialized view.
+     </para>
     </listitem>
    </varlistentry>
 
diff --git a/src/backend/commands/createas.c b/src/backend/commands/createas.c
index 9f37ed7f177..0ed44b246bd 100644
--- a/src/backend/commands/createas.c
+++ b/src/backend/commands/createas.c
@@ -332,18 +332,26 @@ ExecCreateTableAs(ParseState *pstate, CreateTableAsStmt *stmt,
 		/* An existing materialized view can be replaced. */
 		if (is_matview && into->replace)
 		{
-			RefreshMatViewStmt *refresh;
-
 			/* Change the relation to match the new query and other options. */
-			(void) create_ctas_nodata(query->targetList, into);
+			address = create_ctas_nodata(query->targetList, into);
 
-			/* Refresh the materialized view with a fake statement. */
-			refresh = makeNode(RefreshMatViewStmt);
-			refresh->relation = into->rel;
-			refresh->skipData = into->skipData;
-			refresh->concurrent = false;
+			/*
+			 * Refresh the materialized view with a fake statement unless we
+			 * must keep the old data.
+			 */
+			if (!into->keepData)
+			{
+				RefreshMatViewStmt *refresh;
+
+				refresh = makeNode(RefreshMatViewStmt);
+				refresh->relation = into->rel;
+				refresh->skipData = into->skipData;
+				refresh->concurrent = false;
+
+				address = ExecRefreshMatView(refresh, pstate->p_sourcetext, qc);
+			}
 
-			return ExecRefreshMatView(refresh, pstate->p_sourcetext, qc);
+			return address;
 		}
 
 		return InvalidObjectAddress;
diff --git a/src/backend/parser/gram.y b/src/backend/parser/gram.y
index 8be790eaccf..e405268f413 100644
--- a/src/backend/parser/gram.y
+++ b/src/backend/parser/gram.y
@@ -4924,6 +4924,22 @@ CreateMatViewStmt:
 					$7->replace = true;
 					$$ = (Node *) ctas;
 				}
+		| CREATE OR REPLACE OptNoLog MATERIALIZED VIEW create_mv_target AS SelectStmt WITH OLD DATA_P
+				{
+					CreateTableAsStmt *ctas = makeNode(CreateTableAsStmt);
+
+					ctas->query = $9;
+					ctas->into = $7;
+					ctas->objtype = OBJECT_MATVIEW;
+					ctas->is_select_into = false;
+					ctas->if_not_exists = false;
+					/* cram additional flags into the IntoClause */
+					$7->rel->relpersistence = $4;
+					$7->skipData = false;
+					$7->keepData = true;
+					$7->replace = true;
+					$$ = (Node *) ctas;
+				}
 		;
 
 create_mv_target:
diff --git a/src/include/nodes/primnodes.h b/src/include/nodes/primnodes.h
index e800d13a6e0..5290e6c0e8a 100644
--- a/src/include/nodes/primnodes.h
+++ b/src/include/nodes/primnodes.h
@@ -169,6 +169,7 @@ typedef struct IntoClause
 	/* materialized view's SELECT query */
 	struct Query *viewQuery pg_node_attr(query_jumble_ignore);
 	bool		skipData;		/* true for WITH NO DATA */
+	bool		keepData;		/* true for WITH OLD DATA */
 	bool		replace;		/* replace existing matview? */
 } IntoClause;
 
diff --git a/src/test/regress/expected/matview.out b/src/test/regress/expected/matview.out
index d4b42da1ddf..f0f52dd1c6c 100644
--- a/src/test/regress/expected/matview.out
+++ b/src/test/regress/expected/matview.out
@@ -751,6 +751,23 @@ SELECT * FROM mvtest_replace;
  3
 (1 row)
 
+-- replace query but keep old data
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 5 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+ a 
+---
+ 3
+(1 row)
+
+REFRESH MATERIALIZED VIEW mvtest_replace;
+SELECT * FROM mvtest_replace;
+ a 
+---
+ 5
+(1 row)
+
 -- add column
 CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
   SELECT 4 AS a, 1 b;
@@ -905,3 +922,14 @@ ERROR:  syntax error at or near "NOT"
 LINE 1: CREATE OR REPLACE MATERIALIZED VIEW IF NOT EXISTS mvtest_rep...
                                                ^
 DROP MATERIALIZED VIEW mvtest_replace;
+-- Create new matview WITH OLD DATA.  This populates the new matview as if
+-- WITH DATA had been specified.
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 17 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+ a  
+----
+ 17
+(1 row)
+
diff --git a/src/test/regress/sql/matview.sql b/src/test/regress/sql/matview.sql
index d6a4dc4b857..91f547e9cb8 100644
--- a/src/test/regress/sql/matview.sql
+++ b/src/test/regress/sql/matview.sql
@@ -338,6 +338,14 @@ SELECT * FROM mvtest_replace; -- error: not populated
 REFRESH MATERIALIZED VIEW mvtest_replace;
 SELECT * FROM mvtest_replace;
 
+-- replace query but keep old data
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 5 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+REFRESH MATERIALIZED VIEW mvtest_replace;
+SELECT * FROM mvtest_replace;
+
 -- add column
 CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
   SELECT 4 AS a, 1 b;
@@ -422,3 +430,10 @@ CREATE OR REPLACE MATERIALIZED VIEW IF NOT EXISTS mvtest_replace AS
   SELECT 1 AS a;
 
 DROP MATERIALIZED VIEW mvtest_replace;
+
+-- Create new matview WITH OLD DATA.  This populates the new matview as if
+-- WITH DATA had been specified.
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 17 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
-- 
2.48.1


--aewcrbystcgftlni--





^ permalink  raw  reply  [nested|flat] 809+ messages in thread

* [PATCH v2 3/3] Replace matview WITH OLD DATA
@ 2024-07-26 21:33  Erik Wienhold <ewie@ewie.name>
  0 siblings, 0 replies; 809+ messages in thread

From: Erik Wienhold @ 2024-07-26 21:33 UTC (permalink / raw)

---
 .../sgml/ref/create_materialized_view.sgml    | 16 +++++++++--
 src/backend/commands/createas.c               | 26 +++++++++++------
 src/backend/parser/gram.y                     | 16 +++++++++++
 src/include/nodes/primnodes.h                 |  1 +
 src/test/regress/expected/matview.out         | 28 +++++++++++++++++++
 src/test/regress/sql/matview.sql              | 15 ++++++++++
 6 files changed, 90 insertions(+), 12 deletions(-)

diff --git a/doc/src/sgml/ref/create_materialized_view.sgml b/doc/src/sgml/ref/create_materialized_view.sgml
index b5a8e3441a..65633b8bfa 100644
--- a/doc/src/sgml/ref/create_materialized_view.sgml
+++ b/doc/src/sgml/ref/create_materialized_view.sgml
@@ -27,7 +27,7 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
     [ WITH ( <replaceable class="parameter">storage_parameter</replaceable> [= <replaceable class="parameter">value</replaceable>] [, ... ] ) ]
     [ TABLESPACE <replaceable class="parameter">tablespace_name</replaceable> ]
     AS <replaceable>query</replaceable>
-    [ WITH [ NO ] DATA ]
+    [ WITH [ NO | OLD ] DATA ]
 </synopsis>
  </refsynopsisdiv>
 
@@ -37,7 +37,8 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
   <para>
    <command>CREATE MATERIALIZED VIEW</command> defines a materialized view of
    a query.  The query is executed and used to populate the view at the time
-   the command is issued (unless <command>WITH NO DATA</command> is used) and may be
+   the command is issued (unless <command>WITH NO DATA</command> or
+   <command>WITH OLD DATA</command> is used) and may be
    refreshed later using <command>REFRESH MATERIALIZED VIEW</command>.
   </para>
 
@@ -160,7 +161,7 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
    </varlistentry>
 
    <varlistentry>
-    <term><literal>WITH [ NO ] DATA</literal></term>
+    <term><literal>WITH [ NO | OLD ] DATA</literal></term>
     <listitem>
      <para>
       This clause specifies whether or not the materialized view should be
@@ -168,6 +169,15 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
       flagged as unscannable and cannot be queried until <command>REFRESH
       MATERIALIZED VIEW</command> is used.
      </para>
+
+     <para>
+      The form <command>WITH OLD DATA</command> keeps the already stored data
+      when replacing an existing materialized view to keep it populated.  For
+      newly created materialized views, this has the same effect as
+      <command>WITH DATA</command>.  Use this form if you want to use
+      <command>REFRESH MATERIALIZED VIEW CONCURRENTLY</command> as it requires
+      a populated materialized view.
+     </para>
     </listitem>
    </varlistentry>
 
diff --git a/src/backend/commands/createas.c b/src/backend/commands/createas.c
index c5d78252a1..e2948ac966 100644
--- a/src/backend/commands/createas.c
+++ b/src/backend/commands/createas.c
@@ -334,18 +334,26 @@ ExecCreateTableAs(ParseState *pstate, CreateTableAsStmt *stmt,
 		/* An existing materialized view can be replaced. */
 		if (is_matview && into->replace)
 		{
-			RefreshMatViewStmt *refresh;
-
 			/* Change the relation to match the new query and other options. */
-			(void) create_ctas_nodata(query->targetList, into);
+			address = create_ctas_nodata(query->targetList, into);
 
-			/* Refresh the materialized view with a fake statement. */
-			refresh = makeNode(RefreshMatViewStmt);
-			refresh->relation = into->rel;
-			refresh->skipData = into->skipData;
-			refresh->concurrent = false;
+			/*
+			 * Refresh the materialized view with a fake statement unless we
+			 * must keep the old data.
+			 */
+			if (!into->keepData)
+			{
+				RefreshMatViewStmt *refresh;
+
+				refresh = makeNode(RefreshMatViewStmt);
+				refresh->relation = into->rel;
+				refresh->skipData = into->skipData;
+				refresh->concurrent = false;
+
+				address = ExecRefreshMatView(refresh, NULL, NULL, NULL);
+			}
 
-			return ExecRefreshMatView(refresh, NULL, NULL, NULL);
+			return address;
 		}
 
 		return InvalidObjectAddress;
diff --git a/src/backend/parser/gram.y b/src/backend/parser/gram.y
index b1100bdec1..0647955005 100644
--- a/src/backend/parser/gram.y
+++ b/src/backend/parser/gram.y
@@ -4860,6 +4860,22 @@ CreateMatViewStmt:
 					$7->replace = true;
 					$$ = (Node *) ctas;
 				}
+		| CREATE OR REPLACE OptNoLog MATERIALIZED VIEW create_mv_target AS SelectStmt WITH OLD DATA_P
+				{
+					CreateTableAsStmt *ctas = makeNode(CreateTableAsStmt);
+
+					ctas->query = $9;
+					ctas->into = $7;
+					ctas->objtype = OBJECT_MATVIEW;
+					ctas->is_select_into = false;
+					ctas->if_not_exists = false;
+					/* cram additional flags into the IntoClause */
+					$7->rel->relpersistence = $4;
+					$7->skipData = false;
+					$7->keepData = true;
+					$7->replace = true;
+					$$ = (Node *) ctas;
+				}
 		;
 
 create_mv_target:
diff --git a/src/include/nodes/primnodes.h b/src/include/nodes/primnodes.h
index 4b0ee5d10d..ae84cb522e 100644
--- a/src/include/nodes/primnodes.h
+++ b/src/include/nodes/primnodes.h
@@ -168,6 +168,7 @@ typedef struct IntoClause
 	/* materialized view's SELECT query */
 	Node	   *viewQuery pg_node_attr(query_jumble_ignore);
 	bool		skipData;		/* true for WITH NO DATA */
+	bool		keepData;		/* true for WITH OLD DATA */
 	bool		replace;		/* replace existing matview? */
 } IntoClause;
 
diff --git a/src/test/regress/expected/matview.out b/src/test/regress/expected/matview.out
index cefd0d442c..47dfd88bff 100644
--- a/src/test/regress/expected/matview.out
+++ b/src/test/regress/expected/matview.out
@@ -751,6 +751,23 @@ SELECT * FROM mvtest_replace;
  3
 (1 row)
 
+-- replace query but keep old data
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 5 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+ a 
+---
+ 3
+(1 row)
+
+REFRESH MATERIALIZED VIEW mvtest_replace;
+SELECT * FROM mvtest_replace;
+ a 
+---
+ 5
+(1 row)
+
 -- add column
 CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
   SELECT 4 AS a, 1 b;
@@ -905,3 +922,14 @@ ERROR:  syntax error at or near "NOT"
 LINE 1: CREATE OR REPLACE MATERIALIZED VIEW IF NOT EXISTS mvtest_rep...
                                                ^
 DROP MATERIALIZED VIEW mvtest_replace;
+-- Create new matview WITH OLD DATA.  This populates the new matview as if
+-- WITH DATA had been specified.
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 17 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+ a  
+----
+ 17
+(1 row)
+
diff --git a/src/test/regress/sql/matview.sql b/src/test/regress/sql/matview.sql
index c12f0243c9..b268237c24 100644
--- a/src/test/regress/sql/matview.sql
+++ b/src/test/regress/sql/matview.sql
@@ -338,6 +338,14 @@ SELECT * FROM mvtest_replace; -- error: not populated
 REFRESH MATERIALIZED VIEW mvtest_replace;
 SELECT * FROM mvtest_replace;
 
+-- replace query but keep old data
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 5 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+REFRESH MATERIALIZED VIEW mvtest_replace;
+SELECT * FROM mvtest_replace;
+
 -- add column
 CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
   SELECT 4 AS a, 1 b;
@@ -422,3 +430,10 @@ CREATE OR REPLACE MATERIALIZED VIEW IF NOT EXISTS mvtest_replace AS
   SELECT 1 AS a;
 
 DROP MATERIALIZED VIEW mvtest_replace;
+
+-- Create new matview WITH OLD DATA.  This populates the new matview as if
+-- WITH DATA had been specified.
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 17 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
-- 
2.45.2


--nrp556lrhtfteavd--





^ permalink  raw  reply  [nested|flat] 809+ messages in thread

* [PATCH v3 3/3] Replace matview WITH OLD DATA
@ 2024-07-26 21:33  Erik Wienhold <ewie@ewie.name>
  0 siblings, 0 replies; 809+ messages in thread

From: Erik Wienhold @ 2024-07-26 21:33 UTC (permalink / raw)

---
 .../sgml/ref/create_materialized_view.sgml    | 16 +++++++++--
 src/backend/commands/createas.c               | 26 +++++++++++------
 src/backend/parser/gram.y                     | 16 +++++++++++
 src/include/nodes/primnodes.h                 |  1 +
 src/test/regress/expected/matview.out         | 28 +++++++++++++++++++
 src/test/regress/sql/matview.sql              | 15 ++++++++++
 6 files changed, 90 insertions(+), 12 deletions(-)

diff --git a/doc/src/sgml/ref/create_materialized_view.sgml b/doc/src/sgml/ref/create_materialized_view.sgml
index b5a8e3441a..65633b8bfa 100644
--- a/doc/src/sgml/ref/create_materialized_view.sgml
+++ b/doc/src/sgml/ref/create_materialized_view.sgml
@@ -27,7 +27,7 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
     [ WITH ( <replaceable class="parameter">storage_parameter</replaceable> [= <replaceable class="parameter">value</replaceable>] [, ... ] ) ]
     [ TABLESPACE <replaceable class="parameter">tablespace_name</replaceable> ]
     AS <replaceable>query</replaceable>
-    [ WITH [ NO ] DATA ]
+    [ WITH [ NO | OLD ] DATA ]
 </synopsis>
  </refsynopsisdiv>
 
@@ -37,7 +37,8 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
   <para>
    <command>CREATE MATERIALIZED VIEW</command> defines a materialized view of
    a query.  The query is executed and used to populate the view at the time
-   the command is issued (unless <command>WITH NO DATA</command> is used) and may be
+   the command is issued (unless <command>WITH NO DATA</command> or
+   <command>WITH OLD DATA</command> is used) and may be
    refreshed later using <command>REFRESH MATERIALIZED VIEW</command>.
   </para>
 
@@ -160,7 +161,7 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
    </varlistentry>
 
    <varlistentry>
-    <term><literal>WITH [ NO ] DATA</literal></term>
+    <term><literal>WITH [ NO | OLD ] DATA</literal></term>
     <listitem>
      <para>
       This clause specifies whether or not the materialized view should be
@@ -168,6 +169,15 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
       flagged as unscannable and cannot be queried until <command>REFRESH
       MATERIALIZED VIEW</command> is used.
      </para>
+
+     <para>
+      The form <command>WITH OLD DATA</command> keeps the already stored data
+      when replacing an existing materialized view to keep it populated.  For
+      newly created materialized views, this has the same effect as
+      <command>WITH DATA</command>.  Use this form if you want to use
+      <command>REFRESH MATERIALIZED VIEW CONCURRENTLY</command> as it requires
+      a populated materialized view.
+     </para>
     </listitem>
    </varlistentry>
 
diff --git a/src/backend/commands/createas.c b/src/backend/commands/createas.c
index e4ed3748f9..96e7b81966 100644
--- a/src/backend/commands/createas.c
+++ b/src/backend/commands/createas.c
@@ -331,18 +331,26 @@ ExecCreateTableAs(ParseState *pstate, CreateTableAsStmt *stmt,
 		/* An existing materialized view can be replaced. */
 		if (is_matview && into->replace)
 		{
-			RefreshMatViewStmt *refresh;
-
 			/* Change the relation to match the new query and other options. */
-			(void) create_ctas_nodata(query->targetList, into);
+			address = create_ctas_nodata(query->targetList, into);
 
-			/* Refresh the materialized view with a fake statement. */
-			refresh = makeNode(RefreshMatViewStmt);
-			refresh->relation = into->rel;
-			refresh->skipData = into->skipData;
-			refresh->concurrent = false;
+			/*
+			 * Refresh the materialized view with a fake statement unless we
+			 * must keep the old data.
+			 */
+			if (!into->keepData)
+			{
+				RefreshMatViewStmt *refresh;
+
+				refresh = makeNode(RefreshMatViewStmt);
+				refresh->relation = into->rel;
+				refresh->skipData = into->skipData;
+				refresh->concurrent = false;
+
+				address = ExecRefreshMatView(refresh, NULL, NULL);
+			}
 
-			return ExecRefreshMatView(refresh, NULL, NULL);
+			return address;
 		}
 
 		return InvalidObjectAddress;
diff --git a/src/backend/parser/gram.y b/src/backend/parser/gram.y
index 4b939ea7ca..e45ebb24f8 100644
--- a/src/backend/parser/gram.y
+++ b/src/backend/parser/gram.y
@@ -4808,6 +4808,22 @@ CreateMatViewStmt:
 					$7->replace = true;
 					$$ = (Node *) ctas;
 				}
+		| CREATE OR REPLACE OptNoLog MATERIALIZED VIEW create_mv_target AS SelectStmt WITH OLD DATA_P
+				{
+					CreateTableAsStmt *ctas = makeNode(CreateTableAsStmt);
+
+					ctas->query = $9;
+					ctas->into = $7;
+					ctas->objtype = OBJECT_MATVIEW;
+					ctas->is_select_into = false;
+					ctas->if_not_exists = false;
+					/* cram additional flags into the IntoClause */
+					$7->rel->relpersistence = $4;
+					$7->skipData = false;
+					$7->keepData = true;
+					$7->replace = true;
+					$$ = (Node *) ctas;
+				}
 		;
 
 create_mv_target:
diff --git a/src/include/nodes/primnodes.h b/src/include/nodes/primnodes.h
index 4b0ee5d10d..ae84cb522e 100644
--- a/src/include/nodes/primnodes.h
+++ b/src/include/nodes/primnodes.h
@@ -168,6 +168,7 @@ typedef struct IntoClause
 	/* materialized view's SELECT query */
 	Node	   *viewQuery pg_node_attr(query_jumble_ignore);
 	bool		skipData;		/* true for WITH NO DATA */
+	bool		keepData;		/* true for WITH OLD DATA */
 	bool		replace;		/* replace existing matview? */
 } IntoClause;
 
diff --git a/src/test/regress/expected/matview.out b/src/test/regress/expected/matview.out
index cefd0d442c..47dfd88bff 100644
--- a/src/test/regress/expected/matview.out
+++ b/src/test/regress/expected/matview.out
@@ -751,6 +751,23 @@ SELECT * FROM mvtest_replace;
  3
 (1 row)
 
+-- replace query but keep old data
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 5 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+ a 
+---
+ 3
+(1 row)
+
+REFRESH MATERIALIZED VIEW mvtest_replace;
+SELECT * FROM mvtest_replace;
+ a 
+---
+ 5
+(1 row)
+
 -- add column
 CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
   SELECT 4 AS a, 1 b;
@@ -905,3 +922,14 @@ ERROR:  syntax error at or near "NOT"
 LINE 1: CREATE OR REPLACE MATERIALIZED VIEW IF NOT EXISTS mvtest_rep...
                                                ^
 DROP MATERIALIZED VIEW mvtest_replace;
+-- Create new matview WITH OLD DATA.  This populates the new matview as if
+-- WITH DATA had been specified.
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 17 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+ a  
+----
+ 17
+(1 row)
+
diff --git a/src/test/regress/sql/matview.sql b/src/test/regress/sql/matview.sql
index c12f0243c9..b268237c24 100644
--- a/src/test/regress/sql/matview.sql
+++ b/src/test/regress/sql/matview.sql
@@ -338,6 +338,14 @@ SELECT * FROM mvtest_replace; -- error: not populated
 REFRESH MATERIALIZED VIEW mvtest_replace;
 SELECT * FROM mvtest_replace;
 
+-- replace query but keep old data
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 5 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+REFRESH MATERIALIZED VIEW mvtest_replace;
+SELECT * FROM mvtest_replace;
+
 -- add column
 CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
   SELECT 4 AS a, 1 b;
@@ -422,3 +430,10 @@ CREATE OR REPLACE MATERIALIZED VIEW IF NOT EXISTS mvtest_replace AS
   SELECT 1 AS a;
 
 DROP MATERIALIZED VIEW mvtest_replace;
+
+-- Create new matview WITH OLD DATA.  This populates the new matview as if
+-- WITH DATA had been specified.
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 17 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
-- 
2.46.0


--muysnh7l3kienazz--





^ permalink  raw  reply  [nested|flat] 809+ messages in thread

* [PATCH v4 3/3] Replace matview WITH OLD DATA
@ 2024-07-26 21:33  Erik Wienhold <ewie@ewie.name>
  0 siblings, 0 replies; 809+ messages in thread

From: Erik Wienhold @ 2024-07-26 21:33 UTC (permalink / raw)

---
 .../sgml/ref/create_materialized_view.sgml    | 16 +++++++++--
 src/backend/commands/createas.c               | 26 +++++++++++------
 src/backend/parser/gram.y                     | 16 +++++++++++
 src/include/nodes/primnodes.h                 |  1 +
 src/test/regress/expected/matview.out         | 28 +++++++++++++++++++
 src/test/regress/sql/matview.sql              | 15 ++++++++++
 6 files changed, 90 insertions(+), 12 deletions(-)

diff --git a/doc/src/sgml/ref/create_materialized_view.sgml b/doc/src/sgml/ref/create_materialized_view.sgml
index 5e03320eb7..1352e9de40 100644
--- a/doc/src/sgml/ref/create_materialized_view.sgml
+++ b/doc/src/sgml/ref/create_materialized_view.sgml
@@ -27,7 +27,7 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
     [ WITH ( <replaceable class="parameter">storage_parameter</replaceable> [= <replaceable class="parameter">value</replaceable>] [, ... ] ) ]
     [ TABLESPACE <replaceable class="parameter">tablespace_name</replaceable> ]
     AS <replaceable>query</replaceable>
-    [ WITH [ NO ] DATA ]
+    [ WITH [ NO | OLD ] DATA ]
 </synopsis>
  </refsynopsisdiv>
 
@@ -37,7 +37,8 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
   <para>
    <command>CREATE MATERIALIZED VIEW</command> defines a materialized view of
    a query.  The query is executed and used to populate the view at the time
-   the command is issued (unless <command>WITH NO DATA</command> is used) and may be
+   the command is issued (unless <command>WITH NO DATA</command> or
+   <command>WITH OLD DATA</command> is used) and may be
    refreshed later using <command>REFRESH MATERIALIZED VIEW</command>.
   </para>
 
@@ -162,7 +163,7 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
    </varlistentry>
 
    <varlistentry>
-    <term><literal>WITH [ NO ] DATA</literal></term>
+    <term><literal>WITH [ NO | OLD ] DATA</literal></term>
     <listitem>
      <para>
       This clause specifies whether or not the materialized view should be
@@ -170,6 +171,15 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
       flagged as unscannable and cannot be queried until <command>REFRESH
       MATERIALIZED VIEW</command> is used.
      </para>
+
+     <para>
+      The form <command>WITH OLD DATA</command> keeps the already stored data
+      when replacing an existing materialized view to keep it populated.  For
+      newly created materialized views, this has the same effect as
+      <command>WITH DATA</command>.  Use this form if you want to use
+      <command>REFRESH MATERIALIZED VIEW CONCURRENTLY</command> as it requires
+      a populated materialized view.
+     </para>
     </listitem>
    </varlistentry>
 
diff --git a/src/backend/commands/createas.c b/src/backend/commands/createas.c
index d4bc5e5c08..8db000554c 100644
--- a/src/backend/commands/createas.c
+++ b/src/backend/commands/createas.c
@@ -332,18 +332,26 @@ ExecCreateTableAs(ParseState *pstate, CreateTableAsStmt *stmt,
 		/* An existing materialized view can be replaced. */
 		if (is_matview && into->replace)
 		{
-			RefreshMatViewStmt *refresh;
-
 			/* Change the relation to match the new query and other options. */
-			(void) create_ctas_nodata(query->targetList, into);
+			address = create_ctas_nodata(query->targetList, into);
 
-			/* Refresh the materialized view with a fake statement. */
-			refresh = makeNode(RefreshMatViewStmt);
-			refresh->relation = into->rel;
-			refresh->skipData = into->skipData;
-			refresh->concurrent = false;
+			/*
+			 * Refresh the materialized view with a fake statement unless we
+			 * must keep the old data.
+			 */
+			if (!into->keepData)
+			{
+				RefreshMatViewStmt *refresh;
+
+				refresh = makeNode(RefreshMatViewStmt);
+				refresh->relation = into->rel;
+				refresh->skipData = into->skipData;
+				refresh->concurrent = false;
+
+				address = ExecRefreshMatView(refresh, NULL, NULL);
+			}
 
-			return ExecRefreshMatView(refresh, NULL, NULL);
+			return address;
 		}
 
 		return InvalidObjectAddress;
diff --git a/src/backend/parser/gram.y b/src/backend/parser/gram.y
index dadc6b630a..1be1a95cd9 100644
--- a/src/backend/parser/gram.y
+++ b/src/backend/parser/gram.y
@@ -4838,6 +4838,22 @@ CreateMatViewStmt:
 					$7->replace = true;
 					$$ = (Node *) ctas;
 				}
+		| CREATE OR REPLACE OptNoLog MATERIALIZED VIEW create_mv_target AS SelectStmt WITH OLD DATA_P
+				{
+					CreateTableAsStmt *ctas = makeNode(CreateTableAsStmt);
+
+					ctas->query = $9;
+					ctas->into = $7;
+					ctas->objtype = OBJECT_MATVIEW;
+					ctas->is_select_into = false;
+					ctas->if_not_exists = false;
+					/* cram additional flags into the IntoClause */
+					$7->rel->relpersistence = $4;
+					$7->skipData = false;
+					$7->keepData = true;
+					$7->replace = true;
+					$$ = (Node *) ctas;
+				}
 		;
 
 create_mv_target:
diff --git a/src/include/nodes/primnodes.h b/src/include/nodes/primnodes.h
index 533fa847ab..6fa3291c64 100644
--- a/src/include/nodes/primnodes.h
+++ b/src/include/nodes/primnodes.h
@@ -168,6 +168,7 @@ typedef struct IntoClause
 	/* materialized view's SELECT query */
 	struct Query *viewQuery pg_node_attr(query_jumble_ignore);
 	bool		skipData;		/* true for WITH NO DATA */
+	bool		keepData;		/* true for WITH OLD DATA */
 	bool		replace;		/* replace existing matview? */
 } IntoClause;
 
diff --git a/src/test/regress/expected/matview.out b/src/test/regress/expected/matview.out
index cefd0d442c..47dfd88bff 100644
--- a/src/test/regress/expected/matview.out
+++ b/src/test/regress/expected/matview.out
@@ -751,6 +751,23 @@ SELECT * FROM mvtest_replace;
  3
 (1 row)
 
+-- replace query but keep old data
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 5 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+ a 
+---
+ 3
+(1 row)
+
+REFRESH MATERIALIZED VIEW mvtest_replace;
+SELECT * FROM mvtest_replace;
+ a 
+---
+ 5
+(1 row)
+
 -- add column
 CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
   SELECT 4 AS a, 1 b;
@@ -905,3 +922,14 @@ ERROR:  syntax error at or near "NOT"
 LINE 1: CREATE OR REPLACE MATERIALIZED VIEW IF NOT EXISTS mvtest_rep...
                                                ^
 DROP MATERIALIZED VIEW mvtest_replace;
+-- Create new matview WITH OLD DATA.  This populates the new matview as if
+-- WITH DATA had been specified.
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 17 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+ a  
+----
+ 17
+(1 row)
+
diff --git a/src/test/regress/sql/matview.sql b/src/test/regress/sql/matview.sql
index c12f0243c9..b268237c24 100644
--- a/src/test/regress/sql/matview.sql
+++ b/src/test/regress/sql/matview.sql
@@ -338,6 +338,14 @@ SELECT * FROM mvtest_replace; -- error: not populated
 REFRESH MATERIALIZED VIEW mvtest_replace;
 SELECT * FROM mvtest_replace;
 
+-- replace query but keep old data
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 5 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+REFRESH MATERIALIZED VIEW mvtest_replace;
+SELECT * FROM mvtest_replace;
+
 -- add column
 CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
   SELECT 4 AS a, 1 b;
@@ -422,3 +430,10 @@ CREATE OR REPLACE MATERIALIZED VIEW IF NOT EXISTS mvtest_replace AS
   SELECT 1 AS a;
 
 DROP MATERIALIZED VIEW mvtest_replace;
+
+-- Create new matview WITH OLD DATA.  This populates the new matview as if
+-- WITH DATA had been specified.
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 17 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
-- 
2.47.0


--hht4bymbvbva5al5--





^ permalink  raw  reply  [nested|flat] 809+ messages in thread

* [PATCH v2 3/3] Replace matview WITH OLD DATA
@ 2024-07-26 21:33  Erik Wienhold <ewie@ewie.name>
  0 siblings, 0 replies; 809+ messages in thread

From: Erik Wienhold @ 2024-07-26 21:33 UTC (permalink / raw)

---
 .../sgml/ref/create_materialized_view.sgml    | 16 +++++++++--
 src/backend/commands/createas.c               | 26 +++++++++++------
 src/backend/parser/gram.y                     | 16 +++++++++++
 src/include/nodes/primnodes.h                 |  1 +
 src/test/regress/expected/matview.out         | 28 +++++++++++++++++++
 src/test/regress/sql/matview.sql              | 15 ++++++++++
 6 files changed, 90 insertions(+), 12 deletions(-)

diff --git a/doc/src/sgml/ref/create_materialized_view.sgml b/doc/src/sgml/ref/create_materialized_view.sgml
index b5a8e3441a..65633b8bfa 100644
--- a/doc/src/sgml/ref/create_materialized_view.sgml
+++ b/doc/src/sgml/ref/create_materialized_view.sgml
@@ -27,7 +27,7 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
     [ WITH ( <replaceable class="parameter">storage_parameter</replaceable> [= <replaceable class="parameter">value</replaceable>] [, ... ] ) ]
     [ TABLESPACE <replaceable class="parameter">tablespace_name</replaceable> ]
     AS <replaceable>query</replaceable>
-    [ WITH [ NO ] DATA ]
+    [ WITH [ NO | OLD ] DATA ]
 </synopsis>
  </refsynopsisdiv>
 
@@ -37,7 +37,8 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
   <para>
    <command>CREATE MATERIALIZED VIEW</command> defines a materialized view of
    a query.  The query is executed and used to populate the view at the time
-   the command is issued (unless <command>WITH NO DATA</command> is used) and may be
+   the command is issued (unless <command>WITH NO DATA</command> or
+   <command>WITH OLD DATA</command> is used) and may be
    refreshed later using <command>REFRESH MATERIALIZED VIEW</command>.
   </para>
 
@@ -160,7 +161,7 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
    </varlistentry>
 
    <varlistentry>
-    <term><literal>WITH [ NO ] DATA</literal></term>
+    <term><literal>WITH [ NO | OLD ] DATA</literal></term>
     <listitem>
      <para>
       This clause specifies whether or not the materialized view should be
@@ -168,6 +169,15 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
       flagged as unscannable and cannot be queried until <command>REFRESH
       MATERIALIZED VIEW</command> is used.
      </para>
+
+     <para>
+      The form <command>WITH OLD DATA</command> keeps the already stored data
+      when replacing an existing materialized view to keep it populated.  For
+      newly created materialized views, this has the same effect as
+      <command>WITH DATA</command>.  Use this form if you want to use
+      <command>REFRESH MATERIALIZED VIEW CONCURRENTLY</command> as it requires
+      a populated materialized view.
+     </para>
     </listitem>
    </varlistentry>
 
diff --git a/src/backend/commands/createas.c b/src/backend/commands/createas.c
index c5d78252a1..e2948ac966 100644
--- a/src/backend/commands/createas.c
+++ b/src/backend/commands/createas.c
@@ -334,18 +334,26 @@ ExecCreateTableAs(ParseState *pstate, CreateTableAsStmt *stmt,
 		/* An existing materialized view can be replaced. */
 		if (is_matview && into->replace)
 		{
-			RefreshMatViewStmt *refresh;
-
 			/* Change the relation to match the new query and other options. */
-			(void) create_ctas_nodata(query->targetList, into);
+			address = create_ctas_nodata(query->targetList, into);
 
-			/* Refresh the materialized view with a fake statement. */
-			refresh = makeNode(RefreshMatViewStmt);
-			refresh->relation = into->rel;
-			refresh->skipData = into->skipData;
-			refresh->concurrent = false;
+			/*
+			 * Refresh the materialized view with a fake statement unless we
+			 * must keep the old data.
+			 */
+			if (!into->keepData)
+			{
+				RefreshMatViewStmt *refresh;
+
+				refresh = makeNode(RefreshMatViewStmt);
+				refresh->relation = into->rel;
+				refresh->skipData = into->skipData;
+				refresh->concurrent = false;
+
+				address = ExecRefreshMatView(refresh, NULL, NULL, NULL);
+			}
 
-			return ExecRefreshMatView(refresh, NULL, NULL, NULL);
+			return address;
 		}
 
 		return InvalidObjectAddress;
diff --git a/src/backend/parser/gram.y b/src/backend/parser/gram.y
index b1100bdec1..0647955005 100644
--- a/src/backend/parser/gram.y
+++ b/src/backend/parser/gram.y
@@ -4860,6 +4860,22 @@ CreateMatViewStmt:
 					$7->replace = true;
 					$$ = (Node *) ctas;
 				}
+		| CREATE OR REPLACE OptNoLog MATERIALIZED VIEW create_mv_target AS SelectStmt WITH OLD DATA_P
+				{
+					CreateTableAsStmt *ctas = makeNode(CreateTableAsStmt);
+
+					ctas->query = $9;
+					ctas->into = $7;
+					ctas->objtype = OBJECT_MATVIEW;
+					ctas->is_select_into = false;
+					ctas->if_not_exists = false;
+					/* cram additional flags into the IntoClause */
+					$7->rel->relpersistence = $4;
+					$7->skipData = false;
+					$7->keepData = true;
+					$7->replace = true;
+					$$ = (Node *) ctas;
+				}
 		;
 
 create_mv_target:
diff --git a/src/include/nodes/primnodes.h b/src/include/nodes/primnodes.h
index 4b0ee5d10d..ae84cb522e 100644
--- a/src/include/nodes/primnodes.h
+++ b/src/include/nodes/primnodes.h
@@ -168,6 +168,7 @@ typedef struct IntoClause
 	/* materialized view's SELECT query */
 	Node	   *viewQuery pg_node_attr(query_jumble_ignore);
 	bool		skipData;		/* true for WITH NO DATA */
+	bool		keepData;		/* true for WITH OLD DATA */
 	bool		replace;		/* replace existing matview? */
 } IntoClause;
 
diff --git a/src/test/regress/expected/matview.out b/src/test/regress/expected/matview.out
index cefd0d442c..47dfd88bff 100644
--- a/src/test/regress/expected/matview.out
+++ b/src/test/regress/expected/matview.out
@@ -751,6 +751,23 @@ SELECT * FROM mvtest_replace;
  3
 (1 row)
 
+-- replace query but keep old data
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 5 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+ a 
+---
+ 3
+(1 row)
+
+REFRESH MATERIALIZED VIEW mvtest_replace;
+SELECT * FROM mvtest_replace;
+ a 
+---
+ 5
+(1 row)
+
 -- add column
 CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
   SELECT 4 AS a, 1 b;
@@ -905,3 +922,14 @@ ERROR:  syntax error at or near "NOT"
 LINE 1: CREATE OR REPLACE MATERIALIZED VIEW IF NOT EXISTS mvtest_rep...
                                                ^
 DROP MATERIALIZED VIEW mvtest_replace;
+-- Create new matview WITH OLD DATA.  This populates the new matview as if
+-- WITH DATA had been specified.
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 17 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+ a  
+----
+ 17
+(1 row)
+
diff --git a/src/test/regress/sql/matview.sql b/src/test/regress/sql/matview.sql
index c12f0243c9..b268237c24 100644
--- a/src/test/regress/sql/matview.sql
+++ b/src/test/regress/sql/matview.sql
@@ -338,6 +338,14 @@ SELECT * FROM mvtest_replace; -- error: not populated
 REFRESH MATERIALIZED VIEW mvtest_replace;
 SELECT * FROM mvtest_replace;
 
+-- replace query but keep old data
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 5 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+REFRESH MATERIALIZED VIEW mvtest_replace;
+SELECT * FROM mvtest_replace;
+
 -- add column
 CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
   SELECT 4 AS a, 1 b;
@@ -422,3 +430,10 @@ CREATE OR REPLACE MATERIALIZED VIEW IF NOT EXISTS mvtest_replace AS
   SELECT 1 AS a;
 
 DROP MATERIALIZED VIEW mvtest_replace;
+
+-- Create new matview WITH OLD DATA.  This populates the new matview as if
+-- WITH DATA had been specified.
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 17 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
-- 
2.45.2


--nrp556lrhtfteavd--





^ permalink  raw  reply  [nested|flat] 809+ messages in thread

* [PATCH v4 3/3] Replace matview WITH OLD DATA
@ 2024-07-26 21:33  Erik Wienhold <ewie@ewie.name>
  0 siblings, 0 replies; 809+ messages in thread

From: Erik Wienhold @ 2024-07-26 21:33 UTC (permalink / raw)

---
 .../sgml/ref/create_materialized_view.sgml    | 16 +++++++++--
 src/backend/commands/createas.c               | 26 +++++++++++------
 src/backend/parser/gram.y                     | 16 +++++++++++
 src/include/nodes/primnodes.h                 |  1 +
 src/test/regress/expected/matview.out         | 28 +++++++++++++++++++
 src/test/regress/sql/matview.sql              | 15 ++++++++++
 6 files changed, 90 insertions(+), 12 deletions(-)

diff --git a/doc/src/sgml/ref/create_materialized_view.sgml b/doc/src/sgml/ref/create_materialized_view.sgml
index 5e03320eb7..1352e9de40 100644
--- a/doc/src/sgml/ref/create_materialized_view.sgml
+++ b/doc/src/sgml/ref/create_materialized_view.sgml
@@ -27,7 +27,7 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
     [ WITH ( <replaceable class="parameter">storage_parameter</replaceable> [= <replaceable class="parameter">value</replaceable>] [, ... ] ) ]
     [ TABLESPACE <replaceable class="parameter">tablespace_name</replaceable> ]
     AS <replaceable>query</replaceable>
-    [ WITH [ NO ] DATA ]
+    [ WITH [ NO | OLD ] DATA ]
 </synopsis>
  </refsynopsisdiv>
 
@@ -37,7 +37,8 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
   <para>
    <command>CREATE MATERIALIZED VIEW</command> defines a materialized view of
    a query.  The query is executed and used to populate the view at the time
-   the command is issued (unless <command>WITH NO DATA</command> is used) and may be
+   the command is issued (unless <command>WITH NO DATA</command> or
+   <command>WITH OLD DATA</command> is used) and may be
    refreshed later using <command>REFRESH MATERIALIZED VIEW</command>.
   </para>
 
@@ -162,7 +163,7 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
    </varlistentry>
 
    <varlistentry>
-    <term><literal>WITH [ NO ] DATA</literal></term>
+    <term><literal>WITH [ NO | OLD ] DATA</literal></term>
     <listitem>
      <para>
       This clause specifies whether or not the materialized view should be
@@ -170,6 +171,15 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
       flagged as unscannable and cannot be queried until <command>REFRESH
       MATERIALIZED VIEW</command> is used.
      </para>
+
+     <para>
+      The form <command>WITH OLD DATA</command> keeps the already stored data
+      when replacing an existing materialized view to keep it populated.  For
+      newly created materialized views, this has the same effect as
+      <command>WITH DATA</command>.  Use this form if you want to use
+      <command>REFRESH MATERIALIZED VIEW CONCURRENTLY</command> as it requires
+      a populated materialized view.
+     </para>
     </listitem>
    </varlistentry>
 
diff --git a/src/backend/commands/createas.c b/src/backend/commands/createas.c
index d4bc5e5c08..8db000554c 100644
--- a/src/backend/commands/createas.c
+++ b/src/backend/commands/createas.c
@@ -332,18 +332,26 @@ ExecCreateTableAs(ParseState *pstate, CreateTableAsStmt *stmt,
 		/* An existing materialized view can be replaced. */
 		if (is_matview && into->replace)
 		{
-			RefreshMatViewStmt *refresh;
-
 			/* Change the relation to match the new query and other options. */
-			(void) create_ctas_nodata(query->targetList, into);
+			address = create_ctas_nodata(query->targetList, into);
 
-			/* Refresh the materialized view with a fake statement. */
-			refresh = makeNode(RefreshMatViewStmt);
-			refresh->relation = into->rel;
-			refresh->skipData = into->skipData;
-			refresh->concurrent = false;
+			/*
+			 * Refresh the materialized view with a fake statement unless we
+			 * must keep the old data.
+			 */
+			if (!into->keepData)
+			{
+				RefreshMatViewStmt *refresh;
+
+				refresh = makeNode(RefreshMatViewStmt);
+				refresh->relation = into->rel;
+				refresh->skipData = into->skipData;
+				refresh->concurrent = false;
+
+				address = ExecRefreshMatView(refresh, NULL, NULL);
+			}
 
-			return ExecRefreshMatView(refresh, NULL, NULL);
+			return address;
 		}
 
 		return InvalidObjectAddress;
diff --git a/src/backend/parser/gram.y b/src/backend/parser/gram.y
index dadc6b630a..1be1a95cd9 100644
--- a/src/backend/parser/gram.y
+++ b/src/backend/parser/gram.y
@@ -4838,6 +4838,22 @@ CreateMatViewStmt:
 					$7->replace = true;
 					$$ = (Node *) ctas;
 				}
+		| CREATE OR REPLACE OptNoLog MATERIALIZED VIEW create_mv_target AS SelectStmt WITH OLD DATA_P
+				{
+					CreateTableAsStmt *ctas = makeNode(CreateTableAsStmt);
+
+					ctas->query = $9;
+					ctas->into = $7;
+					ctas->objtype = OBJECT_MATVIEW;
+					ctas->is_select_into = false;
+					ctas->if_not_exists = false;
+					/* cram additional flags into the IntoClause */
+					$7->rel->relpersistence = $4;
+					$7->skipData = false;
+					$7->keepData = true;
+					$7->replace = true;
+					$$ = (Node *) ctas;
+				}
 		;
 
 create_mv_target:
diff --git a/src/include/nodes/primnodes.h b/src/include/nodes/primnodes.h
index 533fa847ab..6fa3291c64 100644
--- a/src/include/nodes/primnodes.h
+++ b/src/include/nodes/primnodes.h
@@ -168,6 +168,7 @@ typedef struct IntoClause
 	/* materialized view's SELECT query */
 	struct Query *viewQuery pg_node_attr(query_jumble_ignore);
 	bool		skipData;		/* true for WITH NO DATA */
+	bool		keepData;		/* true for WITH OLD DATA */
 	bool		replace;		/* replace existing matview? */
 } IntoClause;
 
diff --git a/src/test/regress/expected/matview.out b/src/test/regress/expected/matview.out
index cefd0d442c..47dfd88bff 100644
--- a/src/test/regress/expected/matview.out
+++ b/src/test/regress/expected/matview.out
@@ -751,6 +751,23 @@ SELECT * FROM mvtest_replace;
  3
 (1 row)
 
+-- replace query but keep old data
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 5 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+ a 
+---
+ 3
+(1 row)
+
+REFRESH MATERIALIZED VIEW mvtest_replace;
+SELECT * FROM mvtest_replace;
+ a 
+---
+ 5
+(1 row)
+
 -- add column
 CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
   SELECT 4 AS a, 1 b;
@@ -905,3 +922,14 @@ ERROR:  syntax error at or near "NOT"
 LINE 1: CREATE OR REPLACE MATERIALIZED VIEW IF NOT EXISTS mvtest_rep...
                                                ^
 DROP MATERIALIZED VIEW mvtest_replace;
+-- Create new matview WITH OLD DATA.  This populates the new matview as if
+-- WITH DATA had been specified.
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 17 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+ a  
+----
+ 17
+(1 row)
+
diff --git a/src/test/regress/sql/matview.sql b/src/test/regress/sql/matview.sql
index c12f0243c9..b268237c24 100644
--- a/src/test/regress/sql/matview.sql
+++ b/src/test/regress/sql/matview.sql
@@ -338,6 +338,14 @@ SELECT * FROM mvtest_replace; -- error: not populated
 REFRESH MATERIALIZED VIEW mvtest_replace;
 SELECT * FROM mvtest_replace;
 
+-- replace query but keep old data
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 5 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+REFRESH MATERIALIZED VIEW mvtest_replace;
+SELECT * FROM mvtest_replace;
+
 -- add column
 CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
   SELECT 4 AS a, 1 b;
@@ -422,3 +430,10 @@ CREATE OR REPLACE MATERIALIZED VIEW IF NOT EXISTS mvtest_replace AS
   SELECT 1 AS a;
 
 DROP MATERIALIZED VIEW mvtest_replace;
+
+-- Create new matview WITH OLD DATA.  This populates the new matview as if
+-- WITH DATA had been specified.
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 17 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
-- 
2.47.0


--hht4bymbvbva5al5--





^ permalink  raw  reply  [nested|flat] 809+ messages in thread

* [PATCH v6 3/3] Replace matview WITH OLD DATA
@ 2024-07-26 21:33  Erik Wienhold <ewie@ewie.name>
  0 siblings, 0 replies; 809+ messages in thread

From: Erik Wienhold @ 2024-07-26 21:33 UTC (permalink / raw)

---
 .../sgml/ref/create_materialized_view.sgml    | 16 +++++++++--
 src/backend/commands/createas.c               | 26 +++++++++++------
 src/backend/parser/gram.y                     | 16 +++++++++++
 src/include/nodes/primnodes.h                 |  1 +
 src/test/regress/expected/matview.out         | 28 +++++++++++++++++++
 src/test/regress/sql/matview.sql              | 15 ++++++++++
 6 files changed, 90 insertions(+), 12 deletions(-)

diff --git a/doc/src/sgml/ref/create_materialized_view.sgml b/doc/src/sgml/ref/create_materialized_view.sgml
index 5e03320eb73..1352e9de409 100644
--- a/doc/src/sgml/ref/create_materialized_view.sgml
+++ b/doc/src/sgml/ref/create_materialized_view.sgml
@@ -27,7 +27,7 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
     [ WITH ( <replaceable class="parameter">storage_parameter</replaceable> [= <replaceable class="parameter">value</replaceable>] [, ... ] ) ]
     [ TABLESPACE <replaceable class="parameter">tablespace_name</replaceable> ]
     AS <replaceable>query</replaceable>
-    [ WITH [ NO ] DATA ]
+    [ WITH [ NO | OLD ] DATA ]
 </synopsis>
  </refsynopsisdiv>
 
@@ -37,7 +37,8 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
   <para>
    <command>CREATE MATERIALIZED VIEW</command> defines a materialized view of
    a query.  The query is executed and used to populate the view at the time
-   the command is issued (unless <command>WITH NO DATA</command> is used) and may be
+   the command is issued (unless <command>WITH NO DATA</command> or
+   <command>WITH OLD DATA</command> is used) and may be
    refreshed later using <command>REFRESH MATERIALIZED VIEW</command>.
   </para>
 
@@ -162,7 +163,7 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
    </varlistentry>
 
    <varlistentry>
-    <term><literal>WITH [ NO ] DATA</literal></term>
+    <term><literal>WITH [ NO | OLD ] DATA</literal></term>
     <listitem>
      <para>
       This clause specifies whether or not the materialized view should be
@@ -170,6 +171,15 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
       flagged as unscannable and cannot be queried until <command>REFRESH
       MATERIALIZED VIEW</command> is used.
      </para>
+
+     <para>
+      The form <command>WITH OLD DATA</command> keeps the already stored data
+      when replacing an existing materialized view to keep it populated.  For
+      newly created materialized views, this has the same effect as
+      <command>WITH DATA</command>.  Use this form if you want to use
+      <command>REFRESH MATERIALIZED VIEW CONCURRENTLY</command> as it requires
+      a populated materialized view.
+     </para>
     </listitem>
    </varlistentry>
 
diff --git a/src/backend/commands/createas.c b/src/backend/commands/createas.c
index 9f37ed7f177..0ed44b246bd 100644
--- a/src/backend/commands/createas.c
+++ b/src/backend/commands/createas.c
@@ -332,18 +332,26 @@ ExecCreateTableAs(ParseState *pstate, CreateTableAsStmt *stmt,
 		/* An existing materialized view can be replaced. */
 		if (is_matview && into->replace)
 		{
-			RefreshMatViewStmt *refresh;
-
 			/* Change the relation to match the new query and other options. */
-			(void) create_ctas_nodata(query->targetList, into);
+			address = create_ctas_nodata(query->targetList, into);
 
-			/* Refresh the materialized view with a fake statement. */
-			refresh = makeNode(RefreshMatViewStmt);
-			refresh->relation = into->rel;
-			refresh->skipData = into->skipData;
-			refresh->concurrent = false;
+			/*
+			 * Refresh the materialized view with a fake statement unless we
+			 * must keep the old data.
+			 */
+			if (!into->keepData)
+			{
+				RefreshMatViewStmt *refresh;
+
+				refresh = makeNode(RefreshMatViewStmt);
+				refresh->relation = into->rel;
+				refresh->skipData = into->skipData;
+				refresh->concurrent = false;
+
+				address = ExecRefreshMatView(refresh, pstate->p_sourcetext, qc);
+			}
 
-			return ExecRefreshMatView(refresh, pstate->p_sourcetext, qc);
+			return address;
 		}
 
 		return InvalidObjectAddress;
diff --git a/src/backend/parser/gram.y b/src/backend/parser/gram.y
index 8be790eaccf..e405268f413 100644
--- a/src/backend/parser/gram.y
+++ b/src/backend/parser/gram.y
@@ -4924,6 +4924,22 @@ CreateMatViewStmt:
 					$7->replace = true;
 					$$ = (Node *) ctas;
 				}
+		| CREATE OR REPLACE OptNoLog MATERIALIZED VIEW create_mv_target AS SelectStmt WITH OLD DATA_P
+				{
+					CreateTableAsStmt *ctas = makeNode(CreateTableAsStmt);
+
+					ctas->query = $9;
+					ctas->into = $7;
+					ctas->objtype = OBJECT_MATVIEW;
+					ctas->is_select_into = false;
+					ctas->if_not_exists = false;
+					/* cram additional flags into the IntoClause */
+					$7->rel->relpersistence = $4;
+					$7->skipData = false;
+					$7->keepData = true;
+					$7->replace = true;
+					$$ = (Node *) ctas;
+				}
 		;
 
 create_mv_target:
diff --git a/src/include/nodes/primnodes.h b/src/include/nodes/primnodes.h
index e800d13a6e0..5290e6c0e8a 100644
--- a/src/include/nodes/primnodes.h
+++ b/src/include/nodes/primnodes.h
@@ -169,6 +169,7 @@ typedef struct IntoClause
 	/* materialized view's SELECT query */
 	struct Query *viewQuery pg_node_attr(query_jumble_ignore);
 	bool		skipData;		/* true for WITH NO DATA */
+	bool		keepData;		/* true for WITH OLD DATA */
 	bool		replace;		/* replace existing matview? */
 } IntoClause;
 
diff --git a/src/test/regress/expected/matview.out b/src/test/regress/expected/matview.out
index d4b42da1ddf..f0f52dd1c6c 100644
--- a/src/test/regress/expected/matview.out
+++ b/src/test/regress/expected/matview.out
@@ -751,6 +751,23 @@ SELECT * FROM mvtest_replace;
  3
 (1 row)
 
+-- replace query but keep old data
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 5 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+ a 
+---
+ 3
+(1 row)
+
+REFRESH MATERIALIZED VIEW mvtest_replace;
+SELECT * FROM mvtest_replace;
+ a 
+---
+ 5
+(1 row)
+
 -- add column
 CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
   SELECT 4 AS a, 1 b;
@@ -905,3 +922,14 @@ ERROR:  syntax error at or near "NOT"
 LINE 1: CREATE OR REPLACE MATERIALIZED VIEW IF NOT EXISTS mvtest_rep...
                                                ^
 DROP MATERIALIZED VIEW mvtest_replace;
+-- Create new matview WITH OLD DATA.  This populates the new matview as if
+-- WITH DATA had been specified.
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 17 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+ a  
+----
+ 17
+(1 row)
+
diff --git a/src/test/regress/sql/matview.sql b/src/test/regress/sql/matview.sql
index d6a4dc4b857..91f547e9cb8 100644
--- a/src/test/regress/sql/matview.sql
+++ b/src/test/regress/sql/matview.sql
@@ -338,6 +338,14 @@ SELECT * FROM mvtest_replace; -- error: not populated
 REFRESH MATERIALIZED VIEW mvtest_replace;
 SELECT * FROM mvtest_replace;
 
+-- replace query but keep old data
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 5 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+REFRESH MATERIALIZED VIEW mvtest_replace;
+SELECT * FROM mvtest_replace;
+
 -- add column
 CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
   SELECT 4 AS a, 1 b;
@@ -422,3 +430,10 @@ CREATE OR REPLACE MATERIALIZED VIEW IF NOT EXISTS mvtest_replace AS
   SELECT 1 AS a;
 
 DROP MATERIALIZED VIEW mvtest_replace;
+
+-- Create new matview WITH OLD DATA.  This populates the new matview as if
+-- WITH DATA had been specified.
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 17 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
-- 
2.48.1


--aewcrbystcgftlni--





^ permalink  raw  reply  [nested|flat] 809+ messages in thread

* [PATCH v2 3/3] Replace matview WITH OLD DATA
@ 2024-07-26 21:33  Erik Wienhold <ewie@ewie.name>
  0 siblings, 0 replies; 809+ messages in thread

From: Erik Wienhold @ 2024-07-26 21:33 UTC (permalink / raw)

---
 .../sgml/ref/create_materialized_view.sgml    | 16 +++++++++--
 src/backend/commands/createas.c               | 26 +++++++++++------
 src/backend/parser/gram.y                     | 16 +++++++++++
 src/include/nodes/primnodes.h                 |  1 +
 src/test/regress/expected/matview.out         | 28 +++++++++++++++++++
 src/test/regress/sql/matview.sql              | 15 ++++++++++
 6 files changed, 90 insertions(+), 12 deletions(-)

diff --git a/doc/src/sgml/ref/create_materialized_view.sgml b/doc/src/sgml/ref/create_materialized_view.sgml
index b5a8e3441a..65633b8bfa 100644
--- a/doc/src/sgml/ref/create_materialized_view.sgml
+++ b/doc/src/sgml/ref/create_materialized_view.sgml
@@ -27,7 +27,7 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
     [ WITH ( <replaceable class="parameter">storage_parameter</replaceable> [= <replaceable class="parameter">value</replaceable>] [, ... ] ) ]
     [ TABLESPACE <replaceable class="parameter">tablespace_name</replaceable> ]
     AS <replaceable>query</replaceable>
-    [ WITH [ NO ] DATA ]
+    [ WITH [ NO | OLD ] DATA ]
 </synopsis>
  </refsynopsisdiv>
 
@@ -37,7 +37,8 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
   <para>
    <command>CREATE MATERIALIZED VIEW</command> defines a materialized view of
    a query.  The query is executed and used to populate the view at the time
-   the command is issued (unless <command>WITH NO DATA</command> is used) and may be
+   the command is issued (unless <command>WITH NO DATA</command> or
+   <command>WITH OLD DATA</command> is used) and may be
    refreshed later using <command>REFRESH MATERIALIZED VIEW</command>.
   </para>
 
@@ -160,7 +161,7 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
    </varlistentry>
 
    <varlistentry>
-    <term><literal>WITH [ NO ] DATA</literal></term>
+    <term><literal>WITH [ NO | OLD ] DATA</literal></term>
     <listitem>
      <para>
       This clause specifies whether or not the materialized view should be
@@ -168,6 +169,15 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
       flagged as unscannable and cannot be queried until <command>REFRESH
       MATERIALIZED VIEW</command> is used.
      </para>
+
+     <para>
+      The form <command>WITH OLD DATA</command> keeps the already stored data
+      when replacing an existing materialized view to keep it populated.  For
+      newly created materialized views, this has the same effect as
+      <command>WITH DATA</command>.  Use this form if you want to use
+      <command>REFRESH MATERIALIZED VIEW CONCURRENTLY</command> as it requires
+      a populated materialized view.
+     </para>
     </listitem>
    </varlistentry>
 
diff --git a/src/backend/commands/createas.c b/src/backend/commands/createas.c
index c5d78252a1..e2948ac966 100644
--- a/src/backend/commands/createas.c
+++ b/src/backend/commands/createas.c
@@ -334,18 +334,26 @@ ExecCreateTableAs(ParseState *pstate, CreateTableAsStmt *stmt,
 		/* An existing materialized view can be replaced. */
 		if (is_matview && into->replace)
 		{
-			RefreshMatViewStmt *refresh;
-
 			/* Change the relation to match the new query and other options. */
-			(void) create_ctas_nodata(query->targetList, into);
+			address = create_ctas_nodata(query->targetList, into);
 
-			/* Refresh the materialized view with a fake statement. */
-			refresh = makeNode(RefreshMatViewStmt);
-			refresh->relation = into->rel;
-			refresh->skipData = into->skipData;
-			refresh->concurrent = false;
+			/*
+			 * Refresh the materialized view with a fake statement unless we
+			 * must keep the old data.
+			 */
+			if (!into->keepData)
+			{
+				RefreshMatViewStmt *refresh;
+
+				refresh = makeNode(RefreshMatViewStmt);
+				refresh->relation = into->rel;
+				refresh->skipData = into->skipData;
+				refresh->concurrent = false;
+
+				address = ExecRefreshMatView(refresh, NULL, NULL, NULL);
+			}
 
-			return ExecRefreshMatView(refresh, NULL, NULL, NULL);
+			return address;
 		}
 
 		return InvalidObjectAddress;
diff --git a/src/backend/parser/gram.y b/src/backend/parser/gram.y
index b1100bdec1..0647955005 100644
--- a/src/backend/parser/gram.y
+++ b/src/backend/parser/gram.y
@@ -4860,6 +4860,22 @@ CreateMatViewStmt:
 					$7->replace = true;
 					$$ = (Node *) ctas;
 				}
+		| CREATE OR REPLACE OptNoLog MATERIALIZED VIEW create_mv_target AS SelectStmt WITH OLD DATA_P
+				{
+					CreateTableAsStmt *ctas = makeNode(CreateTableAsStmt);
+
+					ctas->query = $9;
+					ctas->into = $7;
+					ctas->objtype = OBJECT_MATVIEW;
+					ctas->is_select_into = false;
+					ctas->if_not_exists = false;
+					/* cram additional flags into the IntoClause */
+					$7->rel->relpersistence = $4;
+					$7->skipData = false;
+					$7->keepData = true;
+					$7->replace = true;
+					$$ = (Node *) ctas;
+				}
 		;
 
 create_mv_target:
diff --git a/src/include/nodes/primnodes.h b/src/include/nodes/primnodes.h
index 4b0ee5d10d..ae84cb522e 100644
--- a/src/include/nodes/primnodes.h
+++ b/src/include/nodes/primnodes.h
@@ -168,6 +168,7 @@ typedef struct IntoClause
 	/* materialized view's SELECT query */
 	Node	   *viewQuery pg_node_attr(query_jumble_ignore);
 	bool		skipData;		/* true for WITH NO DATA */
+	bool		keepData;		/* true for WITH OLD DATA */
 	bool		replace;		/* replace existing matview? */
 } IntoClause;
 
diff --git a/src/test/regress/expected/matview.out b/src/test/regress/expected/matview.out
index cefd0d442c..47dfd88bff 100644
--- a/src/test/regress/expected/matview.out
+++ b/src/test/regress/expected/matview.out
@@ -751,6 +751,23 @@ SELECT * FROM mvtest_replace;
  3
 (1 row)
 
+-- replace query but keep old data
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 5 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+ a 
+---
+ 3
+(1 row)
+
+REFRESH MATERIALIZED VIEW mvtest_replace;
+SELECT * FROM mvtest_replace;
+ a 
+---
+ 5
+(1 row)
+
 -- add column
 CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
   SELECT 4 AS a, 1 b;
@@ -905,3 +922,14 @@ ERROR:  syntax error at or near "NOT"
 LINE 1: CREATE OR REPLACE MATERIALIZED VIEW IF NOT EXISTS mvtest_rep...
                                                ^
 DROP MATERIALIZED VIEW mvtest_replace;
+-- Create new matview WITH OLD DATA.  This populates the new matview as if
+-- WITH DATA had been specified.
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 17 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+ a  
+----
+ 17
+(1 row)
+
diff --git a/src/test/regress/sql/matview.sql b/src/test/regress/sql/matview.sql
index c12f0243c9..b268237c24 100644
--- a/src/test/regress/sql/matview.sql
+++ b/src/test/regress/sql/matview.sql
@@ -338,6 +338,14 @@ SELECT * FROM mvtest_replace; -- error: not populated
 REFRESH MATERIALIZED VIEW mvtest_replace;
 SELECT * FROM mvtest_replace;
 
+-- replace query but keep old data
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 5 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+REFRESH MATERIALIZED VIEW mvtest_replace;
+SELECT * FROM mvtest_replace;
+
 -- add column
 CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
   SELECT 4 AS a, 1 b;
@@ -422,3 +430,10 @@ CREATE OR REPLACE MATERIALIZED VIEW IF NOT EXISTS mvtest_replace AS
   SELECT 1 AS a;
 
 DROP MATERIALIZED VIEW mvtest_replace;
+
+-- Create new matview WITH OLD DATA.  This populates the new matview as if
+-- WITH DATA had been specified.
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 17 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
-- 
2.45.2


--nrp556lrhtfteavd--





^ permalink  raw  reply  [nested|flat] 809+ messages in thread

* [PATCH v3 3/3] Replace matview WITH OLD DATA
@ 2024-07-26 21:33  Erik Wienhold <ewie@ewie.name>
  0 siblings, 0 replies; 809+ messages in thread

From: Erik Wienhold @ 2024-07-26 21:33 UTC (permalink / raw)

---
 .../sgml/ref/create_materialized_view.sgml    | 16 +++++++++--
 src/backend/commands/createas.c               | 26 +++++++++++------
 src/backend/parser/gram.y                     | 16 +++++++++++
 src/include/nodes/primnodes.h                 |  1 +
 src/test/regress/expected/matview.out         | 28 +++++++++++++++++++
 src/test/regress/sql/matview.sql              | 15 ++++++++++
 6 files changed, 90 insertions(+), 12 deletions(-)

diff --git a/doc/src/sgml/ref/create_materialized_view.sgml b/doc/src/sgml/ref/create_materialized_view.sgml
index b5a8e3441a..65633b8bfa 100644
--- a/doc/src/sgml/ref/create_materialized_view.sgml
+++ b/doc/src/sgml/ref/create_materialized_view.sgml
@@ -27,7 +27,7 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
     [ WITH ( <replaceable class="parameter">storage_parameter</replaceable> [= <replaceable class="parameter">value</replaceable>] [, ... ] ) ]
     [ TABLESPACE <replaceable class="parameter">tablespace_name</replaceable> ]
     AS <replaceable>query</replaceable>
-    [ WITH [ NO ] DATA ]
+    [ WITH [ NO | OLD ] DATA ]
 </synopsis>
  </refsynopsisdiv>
 
@@ -37,7 +37,8 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
   <para>
    <command>CREATE MATERIALIZED VIEW</command> defines a materialized view of
    a query.  The query is executed and used to populate the view at the time
-   the command is issued (unless <command>WITH NO DATA</command> is used) and may be
+   the command is issued (unless <command>WITH NO DATA</command> or
+   <command>WITH OLD DATA</command> is used) and may be
    refreshed later using <command>REFRESH MATERIALIZED VIEW</command>.
   </para>
 
@@ -160,7 +161,7 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
    </varlistentry>
 
    <varlistentry>
-    <term><literal>WITH [ NO ] DATA</literal></term>
+    <term><literal>WITH [ NO | OLD ] DATA</literal></term>
     <listitem>
      <para>
       This clause specifies whether or not the materialized view should be
@@ -168,6 +169,15 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
       flagged as unscannable and cannot be queried until <command>REFRESH
       MATERIALIZED VIEW</command> is used.
      </para>
+
+     <para>
+      The form <command>WITH OLD DATA</command> keeps the already stored data
+      when replacing an existing materialized view to keep it populated.  For
+      newly created materialized views, this has the same effect as
+      <command>WITH DATA</command>.  Use this form if you want to use
+      <command>REFRESH MATERIALIZED VIEW CONCURRENTLY</command> as it requires
+      a populated materialized view.
+     </para>
     </listitem>
    </varlistentry>
 
diff --git a/src/backend/commands/createas.c b/src/backend/commands/createas.c
index e4ed3748f9..96e7b81966 100644
--- a/src/backend/commands/createas.c
+++ b/src/backend/commands/createas.c
@@ -331,18 +331,26 @@ ExecCreateTableAs(ParseState *pstate, CreateTableAsStmt *stmt,
 		/* An existing materialized view can be replaced. */
 		if (is_matview && into->replace)
 		{
-			RefreshMatViewStmt *refresh;
-
 			/* Change the relation to match the new query and other options. */
-			(void) create_ctas_nodata(query->targetList, into);
+			address = create_ctas_nodata(query->targetList, into);
 
-			/* Refresh the materialized view with a fake statement. */
-			refresh = makeNode(RefreshMatViewStmt);
-			refresh->relation = into->rel;
-			refresh->skipData = into->skipData;
-			refresh->concurrent = false;
+			/*
+			 * Refresh the materialized view with a fake statement unless we
+			 * must keep the old data.
+			 */
+			if (!into->keepData)
+			{
+				RefreshMatViewStmt *refresh;
+
+				refresh = makeNode(RefreshMatViewStmt);
+				refresh->relation = into->rel;
+				refresh->skipData = into->skipData;
+				refresh->concurrent = false;
+
+				address = ExecRefreshMatView(refresh, NULL, NULL);
+			}
 
-			return ExecRefreshMatView(refresh, NULL, NULL);
+			return address;
 		}
 
 		return InvalidObjectAddress;
diff --git a/src/backend/parser/gram.y b/src/backend/parser/gram.y
index 4b939ea7ca..e45ebb24f8 100644
--- a/src/backend/parser/gram.y
+++ b/src/backend/parser/gram.y
@@ -4808,6 +4808,22 @@ CreateMatViewStmt:
 					$7->replace = true;
 					$$ = (Node *) ctas;
 				}
+		| CREATE OR REPLACE OptNoLog MATERIALIZED VIEW create_mv_target AS SelectStmt WITH OLD DATA_P
+				{
+					CreateTableAsStmt *ctas = makeNode(CreateTableAsStmt);
+
+					ctas->query = $9;
+					ctas->into = $7;
+					ctas->objtype = OBJECT_MATVIEW;
+					ctas->is_select_into = false;
+					ctas->if_not_exists = false;
+					/* cram additional flags into the IntoClause */
+					$7->rel->relpersistence = $4;
+					$7->skipData = false;
+					$7->keepData = true;
+					$7->replace = true;
+					$$ = (Node *) ctas;
+				}
 		;
 
 create_mv_target:
diff --git a/src/include/nodes/primnodes.h b/src/include/nodes/primnodes.h
index 4b0ee5d10d..ae84cb522e 100644
--- a/src/include/nodes/primnodes.h
+++ b/src/include/nodes/primnodes.h
@@ -168,6 +168,7 @@ typedef struct IntoClause
 	/* materialized view's SELECT query */
 	Node	   *viewQuery pg_node_attr(query_jumble_ignore);
 	bool		skipData;		/* true for WITH NO DATA */
+	bool		keepData;		/* true for WITH OLD DATA */
 	bool		replace;		/* replace existing matview? */
 } IntoClause;
 
diff --git a/src/test/regress/expected/matview.out b/src/test/regress/expected/matview.out
index cefd0d442c..47dfd88bff 100644
--- a/src/test/regress/expected/matview.out
+++ b/src/test/regress/expected/matview.out
@@ -751,6 +751,23 @@ SELECT * FROM mvtest_replace;
  3
 (1 row)
 
+-- replace query but keep old data
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 5 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+ a 
+---
+ 3
+(1 row)
+
+REFRESH MATERIALIZED VIEW mvtest_replace;
+SELECT * FROM mvtest_replace;
+ a 
+---
+ 5
+(1 row)
+
 -- add column
 CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
   SELECT 4 AS a, 1 b;
@@ -905,3 +922,14 @@ ERROR:  syntax error at or near "NOT"
 LINE 1: CREATE OR REPLACE MATERIALIZED VIEW IF NOT EXISTS mvtest_rep...
                                                ^
 DROP MATERIALIZED VIEW mvtest_replace;
+-- Create new matview WITH OLD DATA.  This populates the new matview as if
+-- WITH DATA had been specified.
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 17 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+ a  
+----
+ 17
+(1 row)
+
diff --git a/src/test/regress/sql/matview.sql b/src/test/regress/sql/matview.sql
index c12f0243c9..b268237c24 100644
--- a/src/test/regress/sql/matview.sql
+++ b/src/test/regress/sql/matview.sql
@@ -338,6 +338,14 @@ SELECT * FROM mvtest_replace; -- error: not populated
 REFRESH MATERIALIZED VIEW mvtest_replace;
 SELECT * FROM mvtest_replace;
 
+-- replace query but keep old data
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 5 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+REFRESH MATERIALIZED VIEW mvtest_replace;
+SELECT * FROM mvtest_replace;
+
 -- add column
 CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
   SELECT 4 AS a, 1 b;
@@ -422,3 +430,10 @@ CREATE OR REPLACE MATERIALIZED VIEW IF NOT EXISTS mvtest_replace AS
   SELECT 1 AS a;
 
 DROP MATERIALIZED VIEW mvtest_replace;
+
+-- Create new matview WITH OLD DATA.  This populates the new matview as if
+-- WITH DATA had been specified.
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 17 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
-- 
2.46.0


--muysnh7l3kienazz--





^ permalink  raw  reply  [nested|flat] 809+ messages in thread

* [PATCH v4 3/3] Replace matview WITH OLD DATA
@ 2024-07-26 21:33  Erik Wienhold <ewie@ewie.name>
  0 siblings, 0 replies; 809+ messages in thread

From: Erik Wienhold @ 2024-07-26 21:33 UTC (permalink / raw)

---
 .../sgml/ref/create_materialized_view.sgml    | 16 +++++++++--
 src/backend/commands/createas.c               | 26 +++++++++++------
 src/backend/parser/gram.y                     | 16 +++++++++++
 src/include/nodes/primnodes.h                 |  1 +
 src/test/regress/expected/matview.out         | 28 +++++++++++++++++++
 src/test/regress/sql/matview.sql              | 15 ++++++++++
 6 files changed, 90 insertions(+), 12 deletions(-)

diff --git a/doc/src/sgml/ref/create_materialized_view.sgml b/doc/src/sgml/ref/create_materialized_view.sgml
index 5e03320eb7..1352e9de40 100644
--- a/doc/src/sgml/ref/create_materialized_view.sgml
+++ b/doc/src/sgml/ref/create_materialized_view.sgml
@@ -27,7 +27,7 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
     [ WITH ( <replaceable class="parameter">storage_parameter</replaceable> [= <replaceable class="parameter">value</replaceable>] [, ... ] ) ]
     [ TABLESPACE <replaceable class="parameter">tablespace_name</replaceable> ]
     AS <replaceable>query</replaceable>
-    [ WITH [ NO ] DATA ]
+    [ WITH [ NO | OLD ] DATA ]
 </synopsis>
  </refsynopsisdiv>
 
@@ -37,7 +37,8 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
   <para>
    <command>CREATE MATERIALIZED VIEW</command> defines a materialized view of
    a query.  The query is executed and used to populate the view at the time
-   the command is issued (unless <command>WITH NO DATA</command> is used) and may be
+   the command is issued (unless <command>WITH NO DATA</command> or
+   <command>WITH OLD DATA</command> is used) and may be
    refreshed later using <command>REFRESH MATERIALIZED VIEW</command>.
   </para>
 
@@ -162,7 +163,7 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
    </varlistentry>
 
    <varlistentry>
-    <term><literal>WITH [ NO ] DATA</literal></term>
+    <term><literal>WITH [ NO | OLD ] DATA</literal></term>
     <listitem>
      <para>
       This clause specifies whether or not the materialized view should be
@@ -170,6 +171,15 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
       flagged as unscannable and cannot be queried until <command>REFRESH
       MATERIALIZED VIEW</command> is used.
      </para>
+
+     <para>
+      The form <command>WITH OLD DATA</command> keeps the already stored data
+      when replacing an existing materialized view to keep it populated.  For
+      newly created materialized views, this has the same effect as
+      <command>WITH DATA</command>.  Use this form if you want to use
+      <command>REFRESH MATERIALIZED VIEW CONCURRENTLY</command> as it requires
+      a populated materialized view.
+     </para>
     </listitem>
    </varlistentry>
 
diff --git a/src/backend/commands/createas.c b/src/backend/commands/createas.c
index d4bc5e5c08..8db000554c 100644
--- a/src/backend/commands/createas.c
+++ b/src/backend/commands/createas.c
@@ -332,18 +332,26 @@ ExecCreateTableAs(ParseState *pstate, CreateTableAsStmt *stmt,
 		/* An existing materialized view can be replaced. */
 		if (is_matview && into->replace)
 		{
-			RefreshMatViewStmt *refresh;
-
 			/* Change the relation to match the new query and other options. */
-			(void) create_ctas_nodata(query->targetList, into);
+			address = create_ctas_nodata(query->targetList, into);
 
-			/* Refresh the materialized view with a fake statement. */
-			refresh = makeNode(RefreshMatViewStmt);
-			refresh->relation = into->rel;
-			refresh->skipData = into->skipData;
-			refresh->concurrent = false;
+			/*
+			 * Refresh the materialized view with a fake statement unless we
+			 * must keep the old data.
+			 */
+			if (!into->keepData)
+			{
+				RefreshMatViewStmt *refresh;
+
+				refresh = makeNode(RefreshMatViewStmt);
+				refresh->relation = into->rel;
+				refresh->skipData = into->skipData;
+				refresh->concurrent = false;
+
+				address = ExecRefreshMatView(refresh, NULL, NULL);
+			}
 
-			return ExecRefreshMatView(refresh, NULL, NULL);
+			return address;
 		}
 
 		return InvalidObjectAddress;
diff --git a/src/backend/parser/gram.y b/src/backend/parser/gram.y
index dadc6b630a..1be1a95cd9 100644
--- a/src/backend/parser/gram.y
+++ b/src/backend/parser/gram.y
@@ -4838,6 +4838,22 @@ CreateMatViewStmt:
 					$7->replace = true;
 					$$ = (Node *) ctas;
 				}
+		| CREATE OR REPLACE OptNoLog MATERIALIZED VIEW create_mv_target AS SelectStmt WITH OLD DATA_P
+				{
+					CreateTableAsStmt *ctas = makeNode(CreateTableAsStmt);
+
+					ctas->query = $9;
+					ctas->into = $7;
+					ctas->objtype = OBJECT_MATVIEW;
+					ctas->is_select_into = false;
+					ctas->if_not_exists = false;
+					/* cram additional flags into the IntoClause */
+					$7->rel->relpersistence = $4;
+					$7->skipData = false;
+					$7->keepData = true;
+					$7->replace = true;
+					$$ = (Node *) ctas;
+				}
 		;
 
 create_mv_target:
diff --git a/src/include/nodes/primnodes.h b/src/include/nodes/primnodes.h
index 533fa847ab..6fa3291c64 100644
--- a/src/include/nodes/primnodes.h
+++ b/src/include/nodes/primnodes.h
@@ -168,6 +168,7 @@ typedef struct IntoClause
 	/* materialized view's SELECT query */
 	struct Query *viewQuery pg_node_attr(query_jumble_ignore);
 	bool		skipData;		/* true for WITH NO DATA */
+	bool		keepData;		/* true for WITH OLD DATA */
 	bool		replace;		/* replace existing matview? */
 } IntoClause;
 
diff --git a/src/test/regress/expected/matview.out b/src/test/regress/expected/matview.out
index cefd0d442c..47dfd88bff 100644
--- a/src/test/regress/expected/matview.out
+++ b/src/test/regress/expected/matview.out
@@ -751,6 +751,23 @@ SELECT * FROM mvtest_replace;
  3
 (1 row)
 
+-- replace query but keep old data
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 5 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+ a 
+---
+ 3
+(1 row)
+
+REFRESH MATERIALIZED VIEW mvtest_replace;
+SELECT * FROM mvtest_replace;
+ a 
+---
+ 5
+(1 row)
+
 -- add column
 CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
   SELECT 4 AS a, 1 b;
@@ -905,3 +922,14 @@ ERROR:  syntax error at or near "NOT"
 LINE 1: CREATE OR REPLACE MATERIALIZED VIEW IF NOT EXISTS mvtest_rep...
                                                ^
 DROP MATERIALIZED VIEW mvtest_replace;
+-- Create new matview WITH OLD DATA.  This populates the new matview as if
+-- WITH DATA had been specified.
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 17 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+ a  
+----
+ 17
+(1 row)
+
diff --git a/src/test/regress/sql/matview.sql b/src/test/regress/sql/matview.sql
index c12f0243c9..b268237c24 100644
--- a/src/test/regress/sql/matview.sql
+++ b/src/test/regress/sql/matview.sql
@@ -338,6 +338,14 @@ SELECT * FROM mvtest_replace; -- error: not populated
 REFRESH MATERIALIZED VIEW mvtest_replace;
 SELECT * FROM mvtest_replace;
 
+-- replace query but keep old data
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 5 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+REFRESH MATERIALIZED VIEW mvtest_replace;
+SELECT * FROM mvtest_replace;
+
 -- add column
 CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
   SELECT 4 AS a, 1 b;
@@ -422,3 +430,10 @@ CREATE OR REPLACE MATERIALIZED VIEW IF NOT EXISTS mvtest_replace AS
   SELECT 1 AS a;
 
 DROP MATERIALIZED VIEW mvtest_replace;
+
+-- Create new matview WITH OLD DATA.  This populates the new matview as if
+-- WITH DATA had been specified.
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 17 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
-- 
2.47.0


--hht4bymbvbva5al5--





^ permalink  raw  reply  [nested|flat] 809+ messages in thread

* [PATCH v6 3/3] Replace matview WITH OLD DATA
@ 2024-07-26 21:33  Erik Wienhold <ewie@ewie.name>
  0 siblings, 0 replies; 809+ messages in thread

From: Erik Wienhold @ 2024-07-26 21:33 UTC (permalink / raw)

---
 .../sgml/ref/create_materialized_view.sgml    | 16 +++++++++--
 src/backend/commands/createas.c               | 26 +++++++++++------
 src/backend/parser/gram.y                     | 16 +++++++++++
 src/include/nodes/primnodes.h                 |  1 +
 src/test/regress/expected/matview.out         | 28 +++++++++++++++++++
 src/test/regress/sql/matview.sql              | 15 ++++++++++
 6 files changed, 90 insertions(+), 12 deletions(-)

diff --git a/doc/src/sgml/ref/create_materialized_view.sgml b/doc/src/sgml/ref/create_materialized_view.sgml
index 5e03320eb73..1352e9de409 100644
--- a/doc/src/sgml/ref/create_materialized_view.sgml
+++ b/doc/src/sgml/ref/create_materialized_view.sgml
@@ -27,7 +27,7 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
     [ WITH ( <replaceable class="parameter">storage_parameter</replaceable> [= <replaceable class="parameter">value</replaceable>] [, ... ] ) ]
     [ TABLESPACE <replaceable class="parameter">tablespace_name</replaceable> ]
     AS <replaceable>query</replaceable>
-    [ WITH [ NO ] DATA ]
+    [ WITH [ NO | OLD ] DATA ]
 </synopsis>
  </refsynopsisdiv>
 
@@ -37,7 +37,8 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
   <para>
    <command>CREATE MATERIALIZED VIEW</command> defines a materialized view of
    a query.  The query is executed and used to populate the view at the time
-   the command is issued (unless <command>WITH NO DATA</command> is used) and may be
+   the command is issued (unless <command>WITH NO DATA</command> or
+   <command>WITH OLD DATA</command> is used) and may be
    refreshed later using <command>REFRESH MATERIALIZED VIEW</command>.
   </para>
 
@@ -162,7 +163,7 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
    </varlistentry>
 
    <varlistentry>
-    <term><literal>WITH [ NO ] DATA</literal></term>
+    <term><literal>WITH [ NO | OLD ] DATA</literal></term>
     <listitem>
      <para>
       This clause specifies whether or not the materialized view should be
@@ -170,6 +171,15 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
       flagged as unscannable and cannot be queried until <command>REFRESH
       MATERIALIZED VIEW</command> is used.
      </para>
+
+     <para>
+      The form <command>WITH OLD DATA</command> keeps the already stored data
+      when replacing an existing materialized view to keep it populated.  For
+      newly created materialized views, this has the same effect as
+      <command>WITH DATA</command>.  Use this form if you want to use
+      <command>REFRESH MATERIALIZED VIEW CONCURRENTLY</command> as it requires
+      a populated materialized view.
+     </para>
     </listitem>
    </varlistentry>
 
diff --git a/src/backend/commands/createas.c b/src/backend/commands/createas.c
index 9f37ed7f177..0ed44b246bd 100644
--- a/src/backend/commands/createas.c
+++ b/src/backend/commands/createas.c
@@ -332,18 +332,26 @@ ExecCreateTableAs(ParseState *pstate, CreateTableAsStmt *stmt,
 		/* An existing materialized view can be replaced. */
 		if (is_matview && into->replace)
 		{
-			RefreshMatViewStmt *refresh;
-
 			/* Change the relation to match the new query and other options. */
-			(void) create_ctas_nodata(query->targetList, into);
+			address = create_ctas_nodata(query->targetList, into);
 
-			/* Refresh the materialized view with a fake statement. */
-			refresh = makeNode(RefreshMatViewStmt);
-			refresh->relation = into->rel;
-			refresh->skipData = into->skipData;
-			refresh->concurrent = false;
+			/*
+			 * Refresh the materialized view with a fake statement unless we
+			 * must keep the old data.
+			 */
+			if (!into->keepData)
+			{
+				RefreshMatViewStmt *refresh;
+
+				refresh = makeNode(RefreshMatViewStmt);
+				refresh->relation = into->rel;
+				refresh->skipData = into->skipData;
+				refresh->concurrent = false;
+
+				address = ExecRefreshMatView(refresh, pstate->p_sourcetext, qc);
+			}
 
-			return ExecRefreshMatView(refresh, pstate->p_sourcetext, qc);
+			return address;
 		}
 
 		return InvalidObjectAddress;
diff --git a/src/backend/parser/gram.y b/src/backend/parser/gram.y
index 8be790eaccf..e405268f413 100644
--- a/src/backend/parser/gram.y
+++ b/src/backend/parser/gram.y
@@ -4924,6 +4924,22 @@ CreateMatViewStmt:
 					$7->replace = true;
 					$$ = (Node *) ctas;
 				}
+		| CREATE OR REPLACE OptNoLog MATERIALIZED VIEW create_mv_target AS SelectStmt WITH OLD DATA_P
+				{
+					CreateTableAsStmt *ctas = makeNode(CreateTableAsStmt);
+
+					ctas->query = $9;
+					ctas->into = $7;
+					ctas->objtype = OBJECT_MATVIEW;
+					ctas->is_select_into = false;
+					ctas->if_not_exists = false;
+					/* cram additional flags into the IntoClause */
+					$7->rel->relpersistence = $4;
+					$7->skipData = false;
+					$7->keepData = true;
+					$7->replace = true;
+					$$ = (Node *) ctas;
+				}
 		;
 
 create_mv_target:
diff --git a/src/include/nodes/primnodes.h b/src/include/nodes/primnodes.h
index e800d13a6e0..5290e6c0e8a 100644
--- a/src/include/nodes/primnodes.h
+++ b/src/include/nodes/primnodes.h
@@ -169,6 +169,7 @@ typedef struct IntoClause
 	/* materialized view's SELECT query */
 	struct Query *viewQuery pg_node_attr(query_jumble_ignore);
 	bool		skipData;		/* true for WITH NO DATA */
+	bool		keepData;		/* true for WITH OLD DATA */
 	bool		replace;		/* replace existing matview? */
 } IntoClause;
 
diff --git a/src/test/regress/expected/matview.out b/src/test/regress/expected/matview.out
index d4b42da1ddf..f0f52dd1c6c 100644
--- a/src/test/regress/expected/matview.out
+++ b/src/test/regress/expected/matview.out
@@ -751,6 +751,23 @@ SELECT * FROM mvtest_replace;
  3
 (1 row)
 
+-- replace query but keep old data
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 5 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+ a 
+---
+ 3
+(1 row)
+
+REFRESH MATERIALIZED VIEW mvtest_replace;
+SELECT * FROM mvtest_replace;
+ a 
+---
+ 5
+(1 row)
+
 -- add column
 CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
   SELECT 4 AS a, 1 b;
@@ -905,3 +922,14 @@ ERROR:  syntax error at or near "NOT"
 LINE 1: CREATE OR REPLACE MATERIALIZED VIEW IF NOT EXISTS mvtest_rep...
                                                ^
 DROP MATERIALIZED VIEW mvtest_replace;
+-- Create new matview WITH OLD DATA.  This populates the new matview as if
+-- WITH DATA had been specified.
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 17 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+ a  
+----
+ 17
+(1 row)
+
diff --git a/src/test/regress/sql/matview.sql b/src/test/regress/sql/matview.sql
index d6a4dc4b857..91f547e9cb8 100644
--- a/src/test/regress/sql/matview.sql
+++ b/src/test/regress/sql/matview.sql
@@ -338,6 +338,14 @@ SELECT * FROM mvtest_replace; -- error: not populated
 REFRESH MATERIALIZED VIEW mvtest_replace;
 SELECT * FROM mvtest_replace;
 
+-- replace query but keep old data
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 5 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+REFRESH MATERIALIZED VIEW mvtest_replace;
+SELECT * FROM mvtest_replace;
+
 -- add column
 CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
   SELECT 4 AS a, 1 b;
@@ -422,3 +430,10 @@ CREATE OR REPLACE MATERIALIZED VIEW IF NOT EXISTS mvtest_replace AS
   SELECT 1 AS a;
 
 DROP MATERIALIZED VIEW mvtest_replace;
+
+-- Create new matview WITH OLD DATA.  This populates the new matview as if
+-- WITH DATA had been specified.
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 17 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
-- 
2.48.1


--aewcrbystcgftlni--





^ permalink  raw  reply  [nested|flat] 809+ messages in thread

* [PATCH v2 3/3] Replace matview WITH OLD DATA
@ 2024-07-26 21:33  Erik Wienhold <ewie@ewie.name>
  0 siblings, 0 replies; 809+ messages in thread

From: Erik Wienhold @ 2024-07-26 21:33 UTC (permalink / raw)

---
 .../sgml/ref/create_materialized_view.sgml    | 16 +++++++++--
 src/backend/commands/createas.c               | 26 +++++++++++------
 src/backend/parser/gram.y                     | 16 +++++++++++
 src/include/nodes/primnodes.h                 |  1 +
 src/test/regress/expected/matview.out         | 28 +++++++++++++++++++
 src/test/regress/sql/matview.sql              | 15 ++++++++++
 6 files changed, 90 insertions(+), 12 deletions(-)

diff --git a/doc/src/sgml/ref/create_materialized_view.sgml b/doc/src/sgml/ref/create_materialized_view.sgml
index b5a8e3441a..65633b8bfa 100644
--- a/doc/src/sgml/ref/create_materialized_view.sgml
+++ b/doc/src/sgml/ref/create_materialized_view.sgml
@@ -27,7 +27,7 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
     [ WITH ( <replaceable class="parameter">storage_parameter</replaceable> [= <replaceable class="parameter">value</replaceable>] [, ... ] ) ]
     [ TABLESPACE <replaceable class="parameter">tablespace_name</replaceable> ]
     AS <replaceable>query</replaceable>
-    [ WITH [ NO ] DATA ]
+    [ WITH [ NO | OLD ] DATA ]
 </synopsis>
  </refsynopsisdiv>
 
@@ -37,7 +37,8 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
   <para>
    <command>CREATE MATERIALIZED VIEW</command> defines a materialized view of
    a query.  The query is executed and used to populate the view at the time
-   the command is issued (unless <command>WITH NO DATA</command> is used) and may be
+   the command is issued (unless <command>WITH NO DATA</command> or
+   <command>WITH OLD DATA</command> is used) and may be
    refreshed later using <command>REFRESH MATERIALIZED VIEW</command>.
   </para>
 
@@ -160,7 +161,7 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
    </varlistentry>
 
    <varlistentry>
-    <term><literal>WITH [ NO ] DATA</literal></term>
+    <term><literal>WITH [ NO | OLD ] DATA</literal></term>
     <listitem>
      <para>
       This clause specifies whether or not the materialized view should be
@@ -168,6 +169,15 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
       flagged as unscannable and cannot be queried until <command>REFRESH
       MATERIALIZED VIEW</command> is used.
      </para>
+
+     <para>
+      The form <command>WITH OLD DATA</command> keeps the already stored data
+      when replacing an existing materialized view to keep it populated.  For
+      newly created materialized views, this has the same effect as
+      <command>WITH DATA</command>.  Use this form if you want to use
+      <command>REFRESH MATERIALIZED VIEW CONCURRENTLY</command> as it requires
+      a populated materialized view.
+     </para>
     </listitem>
    </varlistentry>
 
diff --git a/src/backend/commands/createas.c b/src/backend/commands/createas.c
index c5d78252a1..e2948ac966 100644
--- a/src/backend/commands/createas.c
+++ b/src/backend/commands/createas.c
@@ -334,18 +334,26 @@ ExecCreateTableAs(ParseState *pstate, CreateTableAsStmt *stmt,
 		/* An existing materialized view can be replaced. */
 		if (is_matview && into->replace)
 		{
-			RefreshMatViewStmt *refresh;
-
 			/* Change the relation to match the new query and other options. */
-			(void) create_ctas_nodata(query->targetList, into);
+			address = create_ctas_nodata(query->targetList, into);
 
-			/* Refresh the materialized view with a fake statement. */
-			refresh = makeNode(RefreshMatViewStmt);
-			refresh->relation = into->rel;
-			refresh->skipData = into->skipData;
-			refresh->concurrent = false;
+			/*
+			 * Refresh the materialized view with a fake statement unless we
+			 * must keep the old data.
+			 */
+			if (!into->keepData)
+			{
+				RefreshMatViewStmt *refresh;
+
+				refresh = makeNode(RefreshMatViewStmt);
+				refresh->relation = into->rel;
+				refresh->skipData = into->skipData;
+				refresh->concurrent = false;
+
+				address = ExecRefreshMatView(refresh, NULL, NULL, NULL);
+			}
 
-			return ExecRefreshMatView(refresh, NULL, NULL, NULL);
+			return address;
 		}
 
 		return InvalidObjectAddress;
diff --git a/src/backend/parser/gram.y b/src/backend/parser/gram.y
index b1100bdec1..0647955005 100644
--- a/src/backend/parser/gram.y
+++ b/src/backend/parser/gram.y
@@ -4860,6 +4860,22 @@ CreateMatViewStmt:
 					$7->replace = true;
 					$$ = (Node *) ctas;
 				}
+		| CREATE OR REPLACE OptNoLog MATERIALIZED VIEW create_mv_target AS SelectStmt WITH OLD DATA_P
+				{
+					CreateTableAsStmt *ctas = makeNode(CreateTableAsStmt);
+
+					ctas->query = $9;
+					ctas->into = $7;
+					ctas->objtype = OBJECT_MATVIEW;
+					ctas->is_select_into = false;
+					ctas->if_not_exists = false;
+					/* cram additional flags into the IntoClause */
+					$7->rel->relpersistence = $4;
+					$7->skipData = false;
+					$7->keepData = true;
+					$7->replace = true;
+					$$ = (Node *) ctas;
+				}
 		;
 
 create_mv_target:
diff --git a/src/include/nodes/primnodes.h b/src/include/nodes/primnodes.h
index 4b0ee5d10d..ae84cb522e 100644
--- a/src/include/nodes/primnodes.h
+++ b/src/include/nodes/primnodes.h
@@ -168,6 +168,7 @@ typedef struct IntoClause
 	/* materialized view's SELECT query */
 	Node	   *viewQuery pg_node_attr(query_jumble_ignore);
 	bool		skipData;		/* true for WITH NO DATA */
+	bool		keepData;		/* true for WITH OLD DATA */
 	bool		replace;		/* replace existing matview? */
 } IntoClause;
 
diff --git a/src/test/regress/expected/matview.out b/src/test/regress/expected/matview.out
index cefd0d442c..47dfd88bff 100644
--- a/src/test/regress/expected/matview.out
+++ b/src/test/regress/expected/matview.out
@@ -751,6 +751,23 @@ SELECT * FROM mvtest_replace;
  3
 (1 row)
 
+-- replace query but keep old data
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 5 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+ a 
+---
+ 3
+(1 row)
+
+REFRESH MATERIALIZED VIEW mvtest_replace;
+SELECT * FROM mvtest_replace;
+ a 
+---
+ 5
+(1 row)
+
 -- add column
 CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
   SELECT 4 AS a, 1 b;
@@ -905,3 +922,14 @@ ERROR:  syntax error at or near "NOT"
 LINE 1: CREATE OR REPLACE MATERIALIZED VIEW IF NOT EXISTS mvtest_rep...
                                                ^
 DROP MATERIALIZED VIEW mvtest_replace;
+-- Create new matview WITH OLD DATA.  This populates the new matview as if
+-- WITH DATA had been specified.
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 17 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+ a  
+----
+ 17
+(1 row)
+
diff --git a/src/test/regress/sql/matview.sql b/src/test/regress/sql/matview.sql
index c12f0243c9..b268237c24 100644
--- a/src/test/regress/sql/matview.sql
+++ b/src/test/regress/sql/matview.sql
@@ -338,6 +338,14 @@ SELECT * FROM mvtest_replace; -- error: not populated
 REFRESH MATERIALIZED VIEW mvtest_replace;
 SELECT * FROM mvtest_replace;
 
+-- replace query but keep old data
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 5 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+REFRESH MATERIALIZED VIEW mvtest_replace;
+SELECT * FROM mvtest_replace;
+
 -- add column
 CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
   SELECT 4 AS a, 1 b;
@@ -422,3 +430,10 @@ CREATE OR REPLACE MATERIALIZED VIEW IF NOT EXISTS mvtest_replace AS
   SELECT 1 AS a;
 
 DROP MATERIALIZED VIEW mvtest_replace;
+
+-- Create new matview WITH OLD DATA.  This populates the new matview as if
+-- WITH DATA had been specified.
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 17 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
-- 
2.45.2


--nrp556lrhtfteavd--





^ permalink  raw  reply  [nested|flat] 809+ messages in thread

* [PATCH v3 3/3] Replace matview WITH OLD DATA
@ 2024-07-26 21:33  Erik Wienhold <ewie@ewie.name>
  0 siblings, 0 replies; 809+ messages in thread

From: Erik Wienhold @ 2024-07-26 21:33 UTC (permalink / raw)

---
 .../sgml/ref/create_materialized_view.sgml    | 16 +++++++++--
 src/backend/commands/createas.c               | 26 +++++++++++------
 src/backend/parser/gram.y                     | 16 +++++++++++
 src/include/nodes/primnodes.h                 |  1 +
 src/test/regress/expected/matview.out         | 28 +++++++++++++++++++
 src/test/regress/sql/matview.sql              | 15 ++++++++++
 6 files changed, 90 insertions(+), 12 deletions(-)

diff --git a/doc/src/sgml/ref/create_materialized_view.sgml b/doc/src/sgml/ref/create_materialized_view.sgml
index b5a8e3441a..65633b8bfa 100644
--- a/doc/src/sgml/ref/create_materialized_view.sgml
+++ b/doc/src/sgml/ref/create_materialized_view.sgml
@@ -27,7 +27,7 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
     [ WITH ( <replaceable class="parameter">storage_parameter</replaceable> [= <replaceable class="parameter">value</replaceable>] [, ... ] ) ]
     [ TABLESPACE <replaceable class="parameter">tablespace_name</replaceable> ]
     AS <replaceable>query</replaceable>
-    [ WITH [ NO ] DATA ]
+    [ WITH [ NO | OLD ] DATA ]
 </synopsis>
  </refsynopsisdiv>
 
@@ -37,7 +37,8 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
   <para>
    <command>CREATE MATERIALIZED VIEW</command> defines a materialized view of
    a query.  The query is executed and used to populate the view at the time
-   the command is issued (unless <command>WITH NO DATA</command> is used) and may be
+   the command is issued (unless <command>WITH NO DATA</command> or
+   <command>WITH OLD DATA</command> is used) and may be
    refreshed later using <command>REFRESH MATERIALIZED VIEW</command>.
   </para>
 
@@ -160,7 +161,7 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
    </varlistentry>
 
    <varlistentry>
-    <term><literal>WITH [ NO ] DATA</literal></term>
+    <term><literal>WITH [ NO | OLD ] DATA</literal></term>
     <listitem>
      <para>
       This clause specifies whether or not the materialized view should be
@@ -168,6 +169,15 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
       flagged as unscannable and cannot be queried until <command>REFRESH
       MATERIALIZED VIEW</command> is used.
      </para>
+
+     <para>
+      The form <command>WITH OLD DATA</command> keeps the already stored data
+      when replacing an existing materialized view to keep it populated.  For
+      newly created materialized views, this has the same effect as
+      <command>WITH DATA</command>.  Use this form if you want to use
+      <command>REFRESH MATERIALIZED VIEW CONCURRENTLY</command> as it requires
+      a populated materialized view.
+     </para>
     </listitem>
    </varlistentry>
 
diff --git a/src/backend/commands/createas.c b/src/backend/commands/createas.c
index e4ed3748f9..96e7b81966 100644
--- a/src/backend/commands/createas.c
+++ b/src/backend/commands/createas.c
@@ -331,18 +331,26 @@ ExecCreateTableAs(ParseState *pstate, CreateTableAsStmt *stmt,
 		/* An existing materialized view can be replaced. */
 		if (is_matview && into->replace)
 		{
-			RefreshMatViewStmt *refresh;
-
 			/* Change the relation to match the new query and other options. */
-			(void) create_ctas_nodata(query->targetList, into);
+			address = create_ctas_nodata(query->targetList, into);
 
-			/* Refresh the materialized view with a fake statement. */
-			refresh = makeNode(RefreshMatViewStmt);
-			refresh->relation = into->rel;
-			refresh->skipData = into->skipData;
-			refresh->concurrent = false;
+			/*
+			 * Refresh the materialized view with a fake statement unless we
+			 * must keep the old data.
+			 */
+			if (!into->keepData)
+			{
+				RefreshMatViewStmt *refresh;
+
+				refresh = makeNode(RefreshMatViewStmt);
+				refresh->relation = into->rel;
+				refresh->skipData = into->skipData;
+				refresh->concurrent = false;
+
+				address = ExecRefreshMatView(refresh, NULL, NULL);
+			}
 
-			return ExecRefreshMatView(refresh, NULL, NULL);
+			return address;
 		}
 
 		return InvalidObjectAddress;
diff --git a/src/backend/parser/gram.y b/src/backend/parser/gram.y
index 4b939ea7ca..e45ebb24f8 100644
--- a/src/backend/parser/gram.y
+++ b/src/backend/parser/gram.y
@@ -4808,6 +4808,22 @@ CreateMatViewStmt:
 					$7->replace = true;
 					$$ = (Node *) ctas;
 				}
+		| CREATE OR REPLACE OptNoLog MATERIALIZED VIEW create_mv_target AS SelectStmt WITH OLD DATA_P
+				{
+					CreateTableAsStmt *ctas = makeNode(CreateTableAsStmt);
+
+					ctas->query = $9;
+					ctas->into = $7;
+					ctas->objtype = OBJECT_MATVIEW;
+					ctas->is_select_into = false;
+					ctas->if_not_exists = false;
+					/* cram additional flags into the IntoClause */
+					$7->rel->relpersistence = $4;
+					$7->skipData = false;
+					$7->keepData = true;
+					$7->replace = true;
+					$$ = (Node *) ctas;
+				}
 		;
 
 create_mv_target:
diff --git a/src/include/nodes/primnodes.h b/src/include/nodes/primnodes.h
index 4b0ee5d10d..ae84cb522e 100644
--- a/src/include/nodes/primnodes.h
+++ b/src/include/nodes/primnodes.h
@@ -168,6 +168,7 @@ typedef struct IntoClause
 	/* materialized view's SELECT query */
 	Node	   *viewQuery pg_node_attr(query_jumble_ignore);
 	bool		skipData;		/* true for WITH NO DATA */
+	bool		keepData;		/* true for WITH OLD DATA */
 	bool		replace;		/* replace existing matview? */
 } IntoClause;
 
diff --git a/src/test/regress/expected/matview.out b/src/test/regress/expected/matview.out
index cefd0d442c..47dfd88bff 100644
--- a/src/test/regress/expected/matview.out
+++ b/src/test/regress/expected/matview.out
@@ -751,6 +751,23 @@ SELECT * FROM mvtest_replace;
  3
 (1 row)
 
+-- replace query but keep old data
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 5 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+ a 
+---
+ 3
+(1 row)
+
+REFRESH MATERIALIZED VIEW mvtest_replace;
+SELECT * FROM mvtest_replace;
+ a 
+---
+ 5
+(1 row)
+
 -- add column
 CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
   SELECT 4 AS a, 1 b;
@@ -905,3 +922,14 @@ ERROR:  syntax error at or near "NOT"
 LINE 1: CREATE OR REPLACE MATERIALIZED VIEW IF NOT EXISTS mvtest_rep...
                                                ^
 DROP MATERIALIZED VIEW mvtest_replace;
+-- Create new matview WITH OLD DATA.  This populates the new matview as if
+-- WITH DATA had been specified.
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 17 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+ a  
+----
+ 17
+(1 row)
+
diff --git a/src/test/regress/sql/matview.sql b/src/test/regress/sql/matview.sql
index c12f0243c9..b268237c24 100644
--- a/src/test/regress/sql/matview.sql
+++ b/src/test/regress/sql/matview.sql
@@ -338,6 +338,14 @@ SELECT * FROM mvtest_replace; -- error: not populated
 REFRESH MATERIALIZED VIEW mvtest_replace;
 SELECT * FROM mvtest_replace;
 
+-- replace query but keep old data
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 5 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+REFRESH MATERIALIZED VIEW mvtest_replace;
+SELECT * FROM mvtest_replace;
+
 -- add column
 CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
   SELECT 4 AS a, 1 b;
@@ -422,3 +430,10 @@ CREATE OR REPLACE MATERIALIZED VIEW IF NOT EXISTS mvtest_replace AS
   SELECT 1 AS a;
 
 DROP MATERIALIZED VIEW mvtest_replace;
+
+-- Create new matview WITH OLD DATA.  This populates the new matview as if
+-- WITH DATA had been specified.
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 17 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
-- 
2.46.0


--muysnh7l3kienazz--





^ permalink  raw  reply  [nested|flat] 809+ messages in thread

* [PATCH v4 3/3] Replace matview WITH OLD DATA
@ 2024-07-26 21:33  Erik Wienhold <ewie@ewie.name>
  0 siblings, 0 replies; 809+ messages in thread

From: Erik Wienhold @ 2024-07-26 21:33 UTC (permalink / raw)

---
 .../sgml/ref/create_materialized_view.sgml    | 16 +++++++++--
 src/backend/commands/createas.c               | 26 +++++++++++------
 src/backend/parser/gram.y                     | 16 +++++++++++
 src/include/nodes/primnodes.h                 |  1 +
 src/test/regress/expected/matview.out         | 28 +++++++++++++++++++
 src/test/regress/sql/matview.sql              | 15 ++++++++++
 6 files changed, 90 insertions(+), 12 deletions(-)

diff --git a/doc/src/sgml/ref/create_materialized_view.sgml b/doc/src/sgml/ref/create_materialized_view.sgml
index 5e03320eb7..1352e9de40 100644
--- a/doc/src/sgml/ref/create_materialized_view.sgml
+++ b/doc/src/sgml/ref/create_materialized_view.sgml
@@ -27,7 +27,7 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
     [ WITH ( <replaceable class="parameter">storage_parameter</replaceable> [= <replaceable class="parameter">value</replaceable>] [, ... ] ) ]
     [ TABLESPACE <replaceable class="parameter">tablespace_name</replaceable> ]
     AS <replaceable>query</replaceable>
-    [ WITH [ NO ] DATA ]
+    [ WITH [ NO | OLD ] DATA ]
 </synopsis>
  </refsynopsisdiv>
 
@@ -37,7 +37,8 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
   <para>
    <command>CREATE MATERIALIZED VIEW</command> defines a materialized view of
    a query.  The query is executed and used to populate the view at the time
-   the command is issued (unless <command>WITH NO DATA</command> is used) and may be
+   the command is issued (unless <command>WITH NO DATA</command> or
+   <command>WITH OLD DATA</command> is used) and may be
    refreshed later using <command>REFRESH MATERIALIZED VIEW</command>.
   </para>
 
@@ -162,7 +163,7 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
    </varlistentry>
 
    <varlistentry>
-    <term><literal>WITH [ NO ] DATA</literal></term>
+    <term><literal>WITH [ NO | OLD ] DATA</literal></term>
     <listitem>
      <para>
       This clause specifies whether or not the materialized view should be
@@ -170,6 +171,15 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
       flagged as unscannable and cannot be queried until <command>REFRESH
       MATERIALIZED VIEW</command> is used.
      </para>
+
+     <para>
+      The form <command>WITH OLD DATA</command> keeps the already stored data
+      when replacing an existing materialized view to keep it populated.  For
+      newly created materialized views, this has the same effect as
+      <command>WITH DATA</command>.  Use this form if you want to use
+      <command>REFRESH MATERIALIZED VIEW CONCURRENTLY</command> as it requires
+      a populated materialized view.
+     </para>
     </listitem>
    </varlistentry>
 
diff --git a/src/backend/commands/createas.c b/src/backend/commands/createas.c
index d4bc5e5c08..8db000554c 100644
--- a/src/backend/commands/createas.c
+++ b/src/backend/commands/createas.c
@@ -332,18 +332,26 @@ ExecCreateTableAs(ParseState *pstate, CreateTableAsStmt *stmt,
 		/* An existing materialized view can be replaced. */
 		if (is_matview && into->replace)
 		{
-			RefreshMatViewStmt *refresh;
-
 			/* Change the relation to match the new query and other options. */
-			(void) create_ctas_nodata(query->targetList, into);
+			address = create_ctas_nodata(query->targetList, into);
 
-			/* Refresh the materialized view with a fake statement. */
-			refresh = makeNode(RefreshMatViewStmt);
-			refresh->relation = into->rel;
-			refresh->skipData = into->skipData;
-			refresh->concurrent = false;
+			/*
+			 * Refresh the materialized view with a fake statement unless we
+			 * must keep the old data.
+			 */
+			if (!into->keepData)
+			{
+				RefreshMatViewStmt *refresh;
+
+				refresh = makeNode(RefreshMatViewStmt);
+				refresh->relation = into->rel;
+				refresh->skipData = into->skipData;
+				refresh->concurrent = false;
+
+				address = ExecRefreshMatView(refresh, NULL, NULL);
+			}
 
-			return ExecRefreshMatView(refresh, NULL, NULL);
+			return address;
 		}
 
 		return InvalidObjectAddress;
diff --git a/src/backend/parser/gram.y b/src/backend/parser/gram.y
index dadc6b630a..1be1a95cd9 100644
--- a/src/backend/parser/gram.y
+++ b/src/backend/parser/gram.y
@@ -4838,6 +4838,22 @@ CreateMatViewStmt:
 					$7->replace = true;
 					$$ = (Node *) ctas;
 				}
+		| CREATE OR REPLACE OptNoLog MATERIALIZED VIEW create_mv_target AS SelectStmt WITH OLD DATA_P
+				{
+					CreateTableAsStmt *ctas = makeNode(CreateTableAsStmt);
+
+					ctas->query = $9;
+					ctas->into = $7;
+					ctas->objtype = OBJECT_MATVIEW;
+					ctas->is_select_into = false;
+					ctas->if_not_exists = false;
+					/* cram additional flags into the IntoClause */
+					$7->rel->relpersistence = $4;
+					$7->skipData = false;
+					$7->keepData = true;
+					$7->replace = true;
+					$$ = (Node *) ctas;
+				}
 		;
 
 create_mv_target:
diff --git a/src/include/nodes/primnodes.h b/src/include/nodes/primnodes.h
index 533fa847ab..6fa3291c64 100644
--- a/src/include/nodes/primnodes.h
+++ b/src/include/nodes/primnodes.h
@@ -168,6 +168,7 @@ typedef struct IntoClause
 	/* materialized view's SELECT query */
 	struct Query *viewQuery pg_node_attr(query_jumble_ignore);
 	bool		skipData;		/* true for WITH NO DATA */
+	bool		keepData;		/* true for WITH OLD DATA */
 	bool		replace;		/* replace existing matview? */
 } IntoClause;
 
diff --git a/src/test/regress/expected/matview.out b/src/test/regress/expected/matview.out
index cefd0d442c..47dfd88bff 100644
--- a/src/test/regress/expected/matview.out
+++ b/src/test/regress/expected/matview.out
@@ -751,6 +751,23 @@ SELECT * FROM mvtest_replace;
  3
 (1 row)
 
+-- replace query but keep old data
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 5 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+ a 
+---
+ 3
+(1 row)
+
+REFRESH MATERIALIZED VIEW mvtest_replace;
+SELECT * FROM mvtest_replace;
+ a 
+---
+ 5
+(1 row)
+
 -- add column
 CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
   SELECT 4 AS a, 1 b;
@@ -905,3 +922,14 @@ ERROR:  syntax error at or near "NOT"
 LINE 1: CREATE OR REPLACE MATERIALIZED VIEW IF NOT EXISTS mvtest_rep...
                                                ^
 DROP MATERIALIZED VIEW mvtest_replace;
+-- Create new matview WITH OLD DATA.  This populates the new matview as if
+-- WITH DATA had been specified.
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 17 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+ a  
+----
+ 17
+(1 row)
+
diff --git a/src/test/regress/sql/matview.sql b/src/test/regress/sql/matview.sql
index c12f0243c9..b268237c24 100644
--- a/src/test/regress/sql/matview.sql
+++ b/src/test/regress/sql/matview.sql
@@ -338,6 +338,14 @@ SELECT * FROM mvtest_replace; -- error: not populated
 REFRESH MATERIALIZED VIEW mvtest_replace;
 SELECT * FROM mvtest_replace;
 
+-- replace query but keep old data
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 5 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+REFRESH MATERIALIZED VIEW mvtest_replace;
+SELECT * FROM mvtest_replace;
+
 -- add column
 CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
   SELECT 4 AS a, 1 b;
@@ -422,3 +430,10 @@ CREATE OR REPLACE MATERIALIZED VIEW IF NOT EXISTS mvtest_replace AS
   SELECT 1 AS a;
 
 DROP MATERIALIZED VIEW mvtest_replace;
+
+-- Create new matview WITH OLD DATA.  This populates the new matview as if
+-- WITH DATA had been specified.
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 17 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
-- 
2.47.0


--hht4bymbvbva5al5--





^ permalink  raw  reply  [nested|flat] 809+ messages in thread

* [PATCH v6 3/3] Replace matview WITH OLD DATA
@ 2024-07-26 21:33  Erik Wienhold <ewie@ewie.name>
  0 siblings, 0 replies; 809+ messages in thread

From: Erik Wienhold @ 2024-07-26 21:33 UTC (permalink / raw)

---
 .../sgml/ref/create_materialized_view.sgml    | 16 +++++++++--
 src/backend/commands/createas.c               | 26 +++++++++++------
 src/backend/parser/gram.y                     | 16 +++++++++++
 src/include/nodes/primnodes.h                 |  1 +
 src/test/regress/expected/matview.out         | 28 +++++++++++++++++++
 src/test/regress/sql/matview.sql              | 15 ++++++++++
 6 files changed, 90 insertions(+), 12 deletions(-)

diff --git a/doc/src/sgml/ref/create_materialized_view.sgml b/doc/src/sgml/ref/create_materialized_view.sgml
index 5e03320eb73..1352e9de409 100644
--- a/doc/src/sgml/ref/create_materialized_view.sgml
+++ b/doc/src/sgml/ref/create_materialized_view.sgml
@@ -27,7 +27,7 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
     [ WITH ( <replaceable class="parameter">storage_parameter</replaceable> [= <replaceable class="parameter">value</replaceable>] [, ... ] ) ]
     [ TABLESPACE <replaceable class="parameter">tablespace_name</replaceable> ]
     AS <replaceable>query</replaceable>
-    [ WITH [ NO ] DATA ]
+    [ WITH [ NO | OLD ] DATA ]
 </synopsis>
  </refsynopsisdiv>
 
@@ -37,7 +37,8 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
   <para>
    <command>CREATE MATERIALIZED VIEW</command> defines a materialized view of
    a query.  The query is executed and used to populate the view at the time
-   the command is issued (unless <command>WITH NO DATA</command> is used) and may be
+   the command is issued (unless <command>WITH NO DATA</command> or
+   <command>WITH OLD DATA</command> is used) and may be
    refreshed later using <command>REFRESH MATERIALIZED VIEW</command>.
   </para>
 
@@ -162,7 +163,7 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
    </varlistentry>
 
    <varlistentry>
-    <term><literal>WITH [ NO ] DATA</literal></term>
+    <term><literal>WITH [ NO | OLD ] DATA</literal></term>
     <listitem>
      <para>
       This clause specifies whether or not the materialized view should be
@@ -170,6 +171,15 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
       flagged as unscannable and cannot be queried until <command>REFRESH
       MATERIALIZED VIEW</command> is used.
      </para>
+
+     <para>
+      The form <command>WITH OLD DATA</command> keeps the already stored data
+      when replacing an existing materialized view to keep it populated.  For
+      newly created materialized views, this has the same effect as
+      <command>WITH DATA</command>.  Use this form if you want to use
+      <command>REFRESH MATERIALIZED VIEW CONCURRENTLY</command> as it requires
+      a populated materialized view.
+     </para>
     </listitem>
    </varlistentry>
 
diff --git a/src/backend/commands/createas.c b/src/backend/commands/createas.c
index 9f37ed7f177..0ed44b246bd 100644
--- a/src/backend/commands/createas.c
+++ b/src/backend/commands/createas.c
@@ -332,18 +332,26 @@ ExecCreateTableAs(ParseState *pstate, CreateTableAsStmt *stmt,
 		/* An existing materialized view can be replaced. */
 		if (is_matview && into->replace)
 		{
-			RefreshMatViewStmt *refresh;
-
 			/* Change the relation to match the new query and other options. */
-			(void) create_ctas_nodata(query->targetList, into);
+			address = create_ctas_nodata(query->targetList, into);
 
-			/* Refresh the materialized view with a fake statement. */
-			refresh = makeNode(RefreshMatViewStmt);
-			refresh->relation = into->rel;
-			refresh->skipData = into->skipData;
-			refresh->concurrent = false;
+			/*
+			 * Refresh the materialized view with a fake statement unless we
+			 * must keep the old data.
+			 */
+			if (!into->keepData)
+			{
+				RefreshMatViewStmt *refresh;
+
+				refresh = makeNode(RefreshMatViewStmt);
+				refresh->relation = into->rel;
+				refresh->skipData = into->skipData;
+				refresh->concurrent = false;
+
+				address = ExecRefreshMatView(refresh, pstate->p_sourcetext, qc);
+			}
 
-			return ExecRefreshMatView(refresh, pstate->p_sourcetext, qc);
+			return address;
 		}
 
 		return InvalidObjectAddress;
diff --git a/src/backend/parser/gram.y b/src/backend/parser/gram.y
index 8be790eaccf..e405268f413 100644
--- a/src/backend/parser/gram.y
+++ b/src/backend/parser/gram.y
@@ -4924,6 +4924,22 @@ CreateMatViewStmt:
 					$7->replace = true;
 					$$ = (Node *) ctas;
 				}
+		| CREATE OR REPLACE OptNoLog MATERIALIZED VIEW create_mv_target AS SelectStmt WITH OLD DATA_P
+				{
+					CreateTableAsStmt *ctas = makeNode(CreateTableAsStmt);
+
+					ctas->query = $9;
+					ctas->into = $7;
+					ctas->objtype = OBJECT_MATVIEW;
+					ctas->is_select_into = false;
+					ctas->if_not_exists = false;
+					/* cram additional flags into the IntoClause */
+					$7->rel->relpersistence = $4;
+					$7->skipData = false;
+					$7->keepData = true;
+					$7->replace = true;
+					$$ = (Node *) ctas;
+				}
 		;
 
 create_mv_target:
diff --git a/src/include/nodes/primnodes.h b/src/include/nodes/primnodes.h
index e800d13a6e0..5290e6c0e8a 100644
--- a/src/include/nodes/primnodes.h
+++ b/src/include/nodes/primnodes.h
@@ -169,6 +169,7 @@ typedef struct IntoClause
 	/* materialized view's SELECT query */
 	struct Query *viewQuery pg_node_attr(query_jumble_ignore);
 	bool		skipData;		/* true for WITH NO DATA */
+	bool		keepData;		/* true for WITH OLD DATA */
 	bool		replace;		/* replace existing matview? */
 } IntoClause;
 
diff --git a/src/test/regress/expected/matview.out b/src/test/regress/expected/matview.out
index d4b42da1ddf..f0f52dd1c6c 100644
--- a/src/test/regress/expected/matview.out
+++ b/src/test/regress/expected/matview.out
@@ -751,6 +751,23 @@ SELECT * FROM mvtest_replace;
  3
 (1 row)
 
+-- replace query but keep old data
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 5 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+ a 
+---
+ 3
+(1 row)
+
+REFRESH MATERIALIZED VIEW mvtest_replace;
+SELECT * FROM mvtest_replace;
+ a 
+---
+ 5
+(1 row)
+
 -- add column
 CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
   SELECT 4 AS a, 1 b;
@@ -905,3 +922,14 @@ ERROR:  syntax error at or near "NOT"
 LINE 1: CREATE OR REPLACE MATERIALIZED VIEW IF NOT EXISTS mvtest_rep...
                                                ^
 DROP MATERIALIZED VIEW mvtest_replace;
+-- Create new matview WITH OLD DATA.  This populates the new matview as if
+-- WITH DATA had been specified.
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 17 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+ a  
+----
+ 17
+(1 row)
+
diff --git a/src/test/regress/sql/matview.sql b/src/test/regress/sql/matview.sql
index d6a4dc4b857..91f547e9cb8 100644
--- a/src/test/regress/sql/matview.sql
+++ b/src/test/regress/sql/matview.sql
@@ -338,6 +338,14 @@ SELECT * FROM mvtest_replace; -- error: not populated
 REFRESH MATERIALIZED VIEW mvtest_replace;
 SELECT * FROM mvtest_replace;
 
+-- replace query but keep old data
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 5 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+REFRESH MATERIALIZED VIEW mvtest_replace;
+SELECT * FROM mvtest_replace;
+
 -- add column
 CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
   SELECT 4 AS a, 1 b;
@@ -422,3 +430,10 @@ CREATE OR REPLACE MATERIALIZED VIEW IF NOT EXISTS mvtest_replace AS
   SELECT 1 AS a;
 
 DROP MATERIALIZED VIEW mvtest_replace;
+
+-- Create new matview WITH OLD DATA.  This populates the new matview as if
+-- WITH DATA had been specified.
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 17 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
-- 
2.48.1


--aewcrbystcgftlni--





^ permalink  raw  reply  [nested|flat] 809+ messages in thread

* [PATCH v2 3/3] Replace matview WITH OLD DATA
@ 2024-07-26 21:33  Erik Wienhold <ewie@ewie.name>
  0 siblings, 0 replies; 809+ messages in thread

From: Erik Wienhold @ 2024-07-26 21:33 UTC (permalink / raw)

---
 .../sgml/ref/create_materialized_view.sgml    | 16 +++++++++--
 src/backend/commands/createas.c               | 26 +++++++++++------
 src/backend/parser/gram.y                     | 16 +++++++++++
 src/include/nodes/primnodes.h                 |  1 +
 src/test/regress/expected/matview.out         | 28 +++++++++++++++++++
 src/test/regress/sql/matview.sql              | 15 ++++++++++
 6 files changed, 90 insertions(+), 12 deletions(-)

diff --git a/doc/src/sgml/ref/create_materialized_view.sgml b/doc/src/sgml/ref/create_materialized_view.sgml
index b5a8e3441a..65633b8bfa 100644
--- a/doc/src/sgml/ref/create_materialized_view.sgml
+++ b/doc/src/sgml/ref/create_materialized_view.sgml
@@ -27,7 +27,7 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
     [ WITH ( <replaceable class="parameter">storage_parameter</replaceable> [= <replaceable class="parameter">value</replaceable>] [, ... ] ) ]
     [ TABLESPACE <replaceable class="parameter">tablespace_name</replaceable> ]
     AS <replaceable>query</replaceable>
-    [ WITH [ NO ] DATA ]
+    [ WITH [ NO | OLD ] DATA ]
 </synopsis>
  </refsynopsisdiv>
 
@@ -37,7 +37,8 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
   <para>
    <command>CREATE MATERIALIZED VIEW</command> defines a materialized view of
    a query.  The query is executed and used to populate the view at the time
-   the command is issued (unless <command>WITH NO DATA</command> is used) and may be
+   the command is issued (unless <command>WITH NO DATA</command> or
+   <command>WITH OLD DATA</command> is used) and may be
    refreshed later using <command>REFRESH MATERIALIZED VIEW</command>.
   </para>
 
@@ -160,7 +161,7 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
    </varlistentry>
 
    <varlistentry>
-    <term><literal>WITH [ NO ] DATA</literal></term>
+    <term><literal>WITH [ NO | OLD ] DATA</literal></term>
     <listitem>
      <para>
       This clause specifies whether or not the materialized view should be
@@ -168,6 +169,15 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
       flagged as unscannable and cannot be queried until <command>REFRESH
       MATERIALIZED VIEW</command> is used.
      </para>
+
+     <para>
+      The form <command>WITH OLD DATA</command> keeps the already stored data
+      when replacing an existing materialized view to keep it populated.  For
+      newly created materialized views, this has the same effect as
+      <command>WITH DATA</command>.  Use this form if you want to use
+      <command>REFRESH MATERIALIZED VIEW CONCURRENTLY</command> as it requires
+      a populated materialized view.
+     </para>
     </listitem>
    </varlistentry>
 
diff --git a/src/backend/commands/createas.c b/src/backend/commands/createas.c
index c5d78252a1..e2948ac966 100644
--- a/src/backend/commands/createas.c
+++ b/src/backend/commands/createas.c
@@ -334,18 +334,26 @@ ExecCreateTableAs(ParseState *pstate, CreateTableAsStmt *stmt,
 		/* An existing materialized view can be replaced. */
 		if (is_matview && into->replace)
 		{
-			RefreshMatViewStmt *refresh;
-
 			/* Change the relation to match the new query and other options. */
-			(void) create_ctas_nodata(query->targetList, into);
+			address = create_ctas_nodata(query->targetList, into);
 
-			/* Refresh the materialized view with a fake statement. */
-			refresh = makeNode(RefreshMatViewStmt);
-			refresh->relation = into->rel;
-			refresh->skipData = into->skipData;
-			refresh->concurrent = false;
+			/*
+			 * Refresh the materialized view with a fake statement unless we
+			 * must keep the old data.
+			 */
+			if (!into->keepData)
+			{
+				RefreshMatViewStmt *refresh;
+
+				refresh = makeNode(RefreshMatViewStmt);
+				refresh->relation = into->rel;
+				refresh->skipData = into->skipData;
+				refresh->concurrent = false;
+
+				address = ExecRefreshMatView(refresh, NULL, NULL, NULL);
+			}
 
-			return ExecRefreshMatView(refresh, NULL, NULL, NULL);
+			return address;
 		}
 
 		return InvalidObjectAddress;
diff --git a/src/backend/parser/gram.y b/src/backend/parser/gram.y
index b1100bdec1..0647955005 100644
--- a/src/backend/parser/gram.y
+++ b/src/backend/parser/gram.y
@@ -4860,6 +4860,22 @@ CreateMatViewStmt:
 					$7->replace = true;
 					$$ = (Node *) ctas;
 				}
+		| CREATE OR REPLACE OptNoLog MATERIALIZED VIEW create_mv_target AS SelectStmt WITH OLD DATA_P
+				{
+					CreateTableAsStmt *ctas = makeNode(CreateTableAsStmt);
+
+					ctas->query = $9;
+					ctas->into = $7;
+					ctas->objtype = OBJECT_MATVIEW;
+					ctas->is_select_into = false;
+					ctas->if_not_exists = false;
+					/* cram additional flags into the IntoClause */
+					$7->rel->relpersistence = $4;
+					$7->skipData = false;
+					$7->keepData = true;
+					$7->replace = true;
+					$$ = (Node *) ctas;
+				}
 		;
 
 create_mv_target:
diff --git a/src/include/nodes/primnodes.h b/src/include/nodes/primnodes.h
index 4b0ee5d10d..ae84cb522e 100644
--- a/src/include/nodes/primnodes.h
+++ b/src/include/nodes/primnodes.h
@@ -168,6 +168,7 @@ typedef struct IntoClause
 	/* materialized view's SELECT query */
 	Node	   *viewQuery pg_node_attr(query_jumble_ignore);
 	bool		skipData;		/* true for WITH NO DATA */
+	bool		keepData;		/* true for WITH OLD DATA */
 	bool		replace;		/* replace existing matview? */
 } IntoClause;
 
diff --git a/src/test/regress/expected/matview.out b/src/test/regress/expected/matview.out
index cefd0d442c..47dfd88bff 100644
--- a/src/test/regress/expected/matview.out
+++ b/src/test/regress/expected/matview.out
@@ -751,6 +751,23 @@ SELECT * FROM mvtest_replace;
  3
 (1 row)
 
+-- replace query but keep old data
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 5 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+ a 
+---
+ 3
+(1 row)
+
+REFRESH MATERIALIZED VIEW mvtest_replace;
+SELECT * FROM mvtest_replace;
+ a 
+---
+ 5
+(1 row)
+
 -- add column
 CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
   SELECT 4 AS a, 1 b;
@@ -905,3 +922,14 @@ ERROR:  syntax error at or near "NOT"
 LINE 1: CREATE OR REPLACE MATERIALIZED VIEW IF NOT EXISTS mvtest_rep...
                                                ^
 DROP MATERIALIZED VIEW mvtest_replace;
+-- Create new matview WITH OLD DATA.  This populates the new matview as if
+-- WITH DATA had been specified.
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 17 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+ a  
+----
+ 17
+(1 row)
+
diff --git a/src/test/regress/sql/matview.sql b/src/test/regress/sql/matview.sql
index c12f0243c9..b268237c24 100644
--- a/src/test/regress/sql/matview.sql
+++ b/src/test/regress/sql/matview.sql
@@ -338,6 +338,14 @@ SELECT * FROM mvtest_replace; -- error: not populated
 REFRESH MATERIALIZED VIEW mvtest_replace;
 SELECT * FROM mvtest_replace;
 
+-- replace query but keep old data
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 5 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+REFRESH MATERIALIZED VIEW mvtest_replace;
+SELECT * FROM mvtest_replace;
+
 -- add column
 CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
   SELECT 4 AS a, 1 b;
@@ -422,3 +430,10 @@ CREATE OR REPLACE MATERIALIZED VIEW IF NOT EXISTS mvtest_replace AS
   SELECT 1 AS a;
 
 DROP MATERIALIZED VIEW mvtest_replace;
+
+-- Create new matview WITH OLD DATA.  This populates the new matview as if
+-- WITH DATA had been specified.
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 17 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
-- 
2.45.2


--nrp556lrhtfteavd--





^ permalink  raw  reply  [nested|flat] 809+ messages in thread

* [PATCH v3 3/3] Replace matview WITH OLD DATA
@ 2024-07-26 21:33  Erik Wienhold <ewie@ewie.name>
  0 siblings, 0 replies; 809+ messages in thread

From: Erik Wienhold @ 2024-07-26 21:33 UTC (permalink / raw)

---
 .../sgml/ref/create_materialized_view.sgml    | 16 +++++++++--
 src/backend/commands/createas.c               | 26 +++++++++++------
 src/backend/parser/gram.y                     | 16 +++++++++++
 src/include/nodes/primnodes.h                 |  1 +
 src/test/regress/expected/matview.out         | 28 +++++++++++++++++++
 src/test/regress/sql/matview.sql              | 15 ++++++++++
 6 files changed, 90 insertions(+), 12 deletions(-)

diff --git a/doc/src/sgml/ref/create_materialized_view.sgml b/doc/src/sgml/ref/create_materialized_view.sgml
index b5a8e3441a..65633b8bfa 100644
--- a/doc/src/sgml/ref/create_materialized_view.sgml
+++ b/doc/src/sgml/ref/create_materialized_view.sgml
@@ -27,7 +27,7 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
     [ WITH ( <replaceable class="parameter">storage_parameter</replaceable> [= <replaceable class="parameter">value</replaceable>] [, ... ] ) ]
     [ TABLESPACE <replaceable class="parameter">tablespace_name</replaceable> ]
     AS <replaceable>query</replaceable>
-    [ WITH [ NO ] DATA ]
+    [ WITH [ NO | OLD ] DATA ]
 </synopsis>
  </refsynopsisdiv>
 
@@ -37,7 +37,8 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
   <para>
    <command>CREATE MATERIALIZED VIEW</command> defines a materialized view of
    a query.  The query is executed and used to populate the view at the time
-   the command is issued (unless <command>WITH NO DATA</command> is used) and may be
+   the command is issued (unless <command>WITH NO DATA</command> or
+   <command>WITH OLD DATA</command> is used) and may be
    refreshed later using <command>REFRESH MATERIALIZED VIEW</command>.
   </para>
 
@@ -160,7 +161,7 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
    </varlistentry>
 
    <varlistentry>
-    <term><literal>WITH [ NO ] DATA</literal></term>
+    <term><literal>WITH [ NO | OLD ] DATA</literal></term>
     <listitem>
      <para>
       This clause specifies whether or not the materialized view should be
@@ -168,6 +169,15 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
       flagged as unscannable and cannot be queried until <command>REFRESH
       MATERIALIZED VIEW</command> is used.
      </para>
+
+     <para>
+      The form <command>WITH OLD DATA</command> keeps the already stored data
+      when replacing an existing materialized view to keep it populated.  For
+      newly created materialized views, this has the same effect as
+      <command>WITH DATA</command>.  Use this form if you want to use
+      <command>REFRESH MATERIALIZED VIEW CONCURRENTLY</command> as it requires
+      a populated materialized view.
+     </para>
     </listitem>
    </varlistentry>
 
diff --git a/src/backend/commands/createas.c b/src/backend/commands/createas.c
index e4ed3748f9..96e7b81966 100644
--- a/src/backend/commands/createas.c
+++ b/src/backend/commands/createas.c
@@ -331,18 +331,26 @@ ExecCreateTableAs(ParseState *pstate, CreateTableAsStmt *stmt,
 		/* An existing materialized view can be replaced. */
 		if (is_matview && into->replace)
 		{
-			RefreshMatViewStmt *refresh;
-
 			/* Change the relation to match the new query and other options. */
-			(void) create_ctas_nodata(query->targetList, into);
+			address = create_ctas_nodata(query->targetList, into);
 
-			/* Refresh the materialized view with a fake statement. */
-			refresh = makeNode(RefreshMatViewStmt);
-			refresh->relation = into->rel;
-			refresh->skipData = into->skipData;
-			refresh->concurrent = false;
+			/*
+			 * Refresh the materialized view with a fake statement unless we
+			 * must keep the old data.
+			 */
+			if (!into->keepData)
+			{
+				RefreshMatViewStmt *refresh;
+
+				refresh = makeNode(RefreshMatViewStmt);
+				refresh->relation = into->rel;
+				refresh->skipData = into->skipData;
+				refresh->concurrent = false;
+
+				address = ExecRefreshMatView(refresh, NULL, NULL);
+			}
 
-			return ExecRefreshMatView(refresh, NULL, NULL);
+			return address;
 		}
 
 		return InvalidObjectAddress;
diff --git a/src/backend/parser/gram.y b/src/backend/parser/gram.y
index 4b939ea7ca..e45ebb24f8 100644
--- a/src/backend/parser/gram.y
+++ b/src/backend/parser/gram.y
@@ -4808,6 +4808,22 @@ CreateMatViewStmt:
 					$7->replace = true;
 					$$ = (Node *) ctas;
 				}
+		| CREATE OR REPLACE OptNoLog MATERIALIZED VIEW create_mv_target AS SelectStmt WITH OLD DATA_P
+				{
+					CreateTableAsStmt *ctas = makeNode(CreateTableAsStmt);
+
+					ctas->query = $9;
+					ctas->into = $7;
+					ctas->objtype = OBJECT_MATVIEW;
+					ctas->is_select_into = false;
+					ctas->if_not_exists = false;
+					/* cram additional flags into the IntoClause */
+					$7->rel->relpersistence = $4;
+					$7->skipData = false;
+					$7->keepData = true;
+					$7->replace = true;
+					$$ = (Node *) ctas;
+				}
 		;
 
 create_mv_target:
diff --git a/src/include/nodes/primnodes.h b/src/include/nodes/primnodes.h
index 4b0ee5d10d..ae84cb522e 100644
--- a/src/include/nodes/primnodes.h
+++ b/src/include/nodes/primnodes.h
@@ -168,6 +168,7 @@ typedef struct IntoClause
 	/* materialized view's SELECT query */
 	Node	   *viewQuery pg_node_attr(query_jumble_ignore);
 	bool		skipData;		/* true for WITH NO DATA */
+	bool		keepData;		/* true for WITH OLD DATA */
 	bool		replace;		/* replace existing matview? */
 } IntoClause;
 
diff --git a/src/test/regress/expected/matview.out b/src/test/regress/expected/matview.out
index cefd0d442c..47dfd88bff 100644
--- a/src/test/regress/expected/matview.out
+++ b/src/test/regress/expected/matview.out
@@ -751,6 +751,23 @@ SELECT * FROM mvtest_replace;
  3
 (1 row)
 
+-- replace query but keep old data
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 5 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+ a 
+---
+ 3
+(1 row)
+
+REFRESH MATERIALIZED VIEW mvtest_replace;
+SELECT * FROM mvtest_replace;
+ a 
+---
+ 5
+(1 row)
+
 -- add column
 CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
   SELECT 4 AS a, 1 b;
@@ -905,3 +922,14 @@ ERROR:  syntax error at or near "NOT"
 LINE 1: CREATE OR REPLACE MATERIALIZED VIEW IF NOT EXISTS mvtest_rep...
                                                ^
 DROP MATERIALIZED VIEW mvtest_replace;
+-- Create new matview WITH OLD DATA.  This populates the new matview as if
+-- WITH DATA had been specified.
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 17 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+ a  
+----
+ 17
+(1 row)
+
diff --git a/src/test/regress/sql/matview.sql b/src/test/regress/sql/matview.sql
index c12f0243c9..b268237c24 100644
--- a/src/test/regress/sql/matview.sql
+++ b/src/test/regress/sql/matview.sql
@@ -338,6 +338,14 @@ SELECT * FROM mvtest_replace; -- error: not populated
 REFRESH MATERIALIZED VIEW mvtest_replace;
 SELECT * FROM mvtest_replace;
 
+-- replace query but keep old data
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 5 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+REFRESH MATERIALIZED VIEW mvtest_replace;
+SELECT * FROM mvtest_replace;
+
 -- add column
 CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
   SELECT 4 AS a, 1 b;
@@ -422,3 +430,10 @@ CREATE OR REPLACE MATERIALIZED VIEW IF NOT EXISTS mvtest_replace AS
   SELECT 1 AS a;
 
 DROP MATERIALIZED VIEW mvtest_replace;
+
+-- Create new matview WITH OLD DATA.  This populates the new matview as if
+-- WITH DATA had been specified.
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 17 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
-- 
2.46.0


--muysnh7l3kienazz--





^ permalink  raw  reply  [nested|flat] 809+ messages in thread

* [PATCH v4 3/3] Replace matview WITH OLD DATA
@ 2024-07-26 21:33  Erik Wienhold <ewie@ewie.name>
  0 siblings, 0 replies; 809+ messages in thread

From: Erik Wienhold @ 2024-07-26 21:33 UTC (permalink / raw)

---
 .../sgml/ref/create_materialized_view.sgml    | 16 +++++++++--
 src/backend/commands/createas.c               | 26 +++++++++++------
 src/backend/parser/gram.y                     | 16 +++++++++++
 src/include/nodes/primnodes.h                 |  1 +
 src/test/regress/expected/matview.out         | 28 +++++++++++++++++++
 src/test/regress/sql/matview.sql              | 15 ++++++++++
 6 files changed, 90 insertions(+), 12 deletions(-)

diff --git a/doc/src/sgml/ref/create_materialized_view.sgml b/doc/src/sgml/ref/create_materialized_view.sgml
index 5e03320eb7..1352e9de40 100644
--- a/doc/src/sgml/ref/create_materialized_view.sgml
+++ b/doc/src/sgml/ref/create_materialized_view.sgml
@@ -27,7 +27,7 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
     [ WITH ( <replaceable class="parameter">storage_parameter</replaceable> [= <replaceable class="parameter">value</replaceable>] [, ... ] ) ]
     [ TABLESPACE <replaceable class="parameter">tablespace_name</replaceable> ]
     AS <replaceable>query</replaceable>
-    [ WITH [ NO ] DATA ]
+    [ WITH [ NO | OLD ] DATA ]
 </synopsis>
  </refsynopsisdiv>
 
@@ -37,7 +37,8 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
   <para>
    <command>CREATE MATERIALIZED VIEW</command> defines a materialized view of
    a query.  The query is executed and used to populate the view at the time
-   the command is issued (unless <command>WITH NO DATA</command> is used) and may be
+   the command is issued (unless <command>WITH NO DATA</command> or
+   <command>WITH OLD DATA</command> is used) and may be
    refreshed later using <command>REFRESH MATERIALIZED VIEW</command>.
   </para>
 
@@ -162,7 +163,7 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
    </varlistentry>
 
    <varlistentry>
-    <term><literal>WITH [ NO ] DATA</literal></term>
+    <term><literal>WITH [ NO | OLD ] DATA</literal></term>
     <listitem>
      <para>
       This clause specifies whether or not the materialized view should be
@@ -170,6 +171,15 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
       flagged as unscannable and cannot be queried until <command>REFRESH
       MATERIALIZED VIEW</command> is used.
      </para>
+
+     <para>
+      The form <command>WITH OLD DATA</command> keeps the already stored data
+      when replacing an existing materialized view to keep it populated.  For
+      newly created materialized views, this has the same effect as
+      <command>WITH DATA</command>.  Use this form if you want to use
+      <command>REFRESH MATERIALIZED VIEW CONCURRENTLY</command> as it requires
+      a populated materialized view.
+     </para>
     </listitem>
    </varlistentry>
 
diff --git a/src/backend/commands/createas.c b/src/backend/commands/createas.c
index d4bc5e5c08..8db000554c 100644
--- a/src/backend/commands/createas.c
+++ b/src/backend/commands/createas.c
@@ -332,18 +332,26 @@ ExecCreateTableAs(ParseState *pstate, CreateTableAsStmt *stmt,
 		/* An existing materialized view can be replaced. */
 		if (is_matview && into->replace)
 		{
-			RefreshMatViewStmt *refresh;
-
 			/* Change the relation to match the new query and other options. */
-			(void) create_ctas_nodata(query->targetList, into);
+			address = create_ctas_nodata(query->targetList, into);
 
-			/* Refresh the materialized view with a fake statement. */
-			refresh = makeNode(RefreshMatViewStmt);
-			refresh->relation = into->rel;
-			refresh->skipData = into->skipData;
-			refresh->concurrent = false;
+			/*
+			 * Refresh the materialized view with a fake statement unless we
+			 * must keep the old data.
+			 */
+			if (!into->keepData)
+			{
+				RefreshMatViewStmt *refresh;
+
+				refresh = makeNode(RefreshMatViewStmt);
+				refresh->relation = into->rel;
+				refresh->skipData = into->skipData;
+				refresh->concurrent = false;
+
+				address = ExecRefreshMatView(refresh, NULL, NULL);
+			}
 
-			return ExecRefreshMatView(refresh, NULL, NULL);
+			return address;
 		}
 
 		return InvalidObjectAddress;
diff --git a/src/backend/parser/gram.y b/src/backend/parser/gram.y
index dadc6b630a..1be1a95cd9 100644
--- a/src/backend/parser/gram.y
+++ b/src/backend/parser/gram.y
@@ -4838,6 +4838,22 @@ CreateMatViewStmt:
 					$7->replace = true;
 					$$ = (Node *) ctas;
 				}
+		| CREATE OR REPLACE OptNoLog MATERIALIZED VIEW create_mv_target AS SelectStmt WITH OLD DATA_P
+				{
+					CreateTableAsStmt *ctas = makeNode(CreateTableAsStmt);
+
+					ctas->query = $9;
+					ctas->into = $7;
+					ctas->objtype = OBJECT_MATVIEW;
+					ctas->is_select_into = false;
+					ctas->if_not_exists = false;
+					/* cram additional flags into the IntoClause */
+					$7->rel->relpersistence = $4;
+					$7->skipData = false;
+					$7->keepData = true;
+					$7->replace = true;
+					$$ = (Node *) ctas;
+				}
 		;
 
 create_mv_target:
diff --git a/src/include/nodes/primnodes.h b/src/include/nodes/primnodes.h
index 533fa847ab..6fa3291c64 100644
--- a/src/include/nodes/primnodes.h
+++ b/src/include/nodes/primnodes.h
@@ -168,6 +168,7 @@ typedef struct IntoClause
 	/* materialized view's SELECT query */
 	struct Query *viewQuery pg_node_attr(query_jumble_ignore);
 	bool		skipData;		/* true for WITH NO DATA */
+	bool		keepData;		/* true for WITH OLD DATA */
 	bool		replace;		/* replace existing matview? */
 } IntoClause;
 
diff --git a/src/test/regress/expected/matview.out b/src/test/regress/expected/matview.out
index cefd0d442c..47dfd88bff 100644
--- a/src/test/regress/expected/matview.out
+++ b/src/test/regress/expected/matview.out
@@ -751,6 +751,23 @@ SELECT * FROM mvtest_replace;
  3
 (1 row)
 
+-- replace query but keep old data
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 5 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+ a 
+---
+ 3
+(1 row)
+
+REFRESH MATERIALIZED VIEW mvtest_replace;
+SELECT * FROM mvtest_replace;
+ a 
+---
+ 5
+(1 row)
+
 -- add column
 CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
   SELECT 4 AS a, 1 b;
@@ -905,3 +922,14 @@ ERROR:  syntax error at or near "NOT"
 LINE 1: CREATE OR REPLACE MATERIALIZED VIEW IF NOT EXISTS mvtest_rep...
                                                ^
 DROP MATERIALIZED VIEW mvtest_replace;
+-- Create new matview WITH OLD DATA.  This populates the new matview as if
+-- WITH DATA had been specified.
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 17 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+ a  
+----
+ 17
+(1 row)
+
diff --git a/src/test/regress/sql/matview.sql b/src/test/regress/sql/matview.sql
index c12f0243c9..b268237c24 100644
--- a/src/test/regress/sql/matview.sql
+++ b/src/test/regress/sql/matview.sql
@@ -338,6 +338,14 @@ SELECT * FROM mvtest_replace; -- error: not populated
 REFRESH MATERIALIZED VIEW mvtest_replace;
 SELECT * FROM mvtest_replace;
 
+-- replace query but keep old data
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 5 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+REFRESH MATERIALIZED VIEW mvtest_replace;
+SELECT * FROM mvtest_replace;
+
 -- add column
 CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
   SELECT 4 AS a, 1 b;
@@ -422,3 +430,10 @@ CREATE OR REPLACE MATERIALIZED VIEW IF NOT EXISTS mvtest_replace AS
   SELECT 1 AS a;
 
 DROP MATERIALIZED VIEW mvtest_replace;
+
+-- Create new matview WITH OLD DATA.  This populates the new matview as if
+-- WITH DATA had been specified.
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 17 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
-- 
2.47.0


--hht4bymbvbva5al5--





^ permalink  raw  reply  [nested|flat] 809+ messages in thread

* [PATCH v6 3/3] Replace matview WITH OLD DATA
@ 2024-07-26 21:33  Erik Wienhold <ewie@ewie.name>
  0 siblings, 0 replies; 809+ messages in thread

From: Erik Wienhold @ 2024-07-26 21:33 UTC (permalink / raw)

---
 .../sgml/ref/create_materialized_view.sgml    | 16 +++++++++--
 src/backend/commands/createas.c               | 26 +++++++++++------
 src/backend/parser/gram.y                     | 16 +++++++++++
 src/include/nodes/primnodes.h                 |  1 +
 src/test/regress/expected/matview.out         | 28 +++++++++++++++++++
 src/test/regress/sql/matview.sql              | 15 ++++++++++
 6 files changed, 90 insertions(+), 12 deletions(-)

diff --git a/doc/src/sgml/ref/create_materialized_view.sgml b/doc/src/sgml/ref/create_materialized_view.sgml
index 5e03320eb73..1352e9de409 100644
--- a/doc/src/sgml/ref/create_materialized_view.sgml
+++ b/doc/src/sgml/ref/create_materialized_view.sgml
@@ -27,7 +27,7 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
     [ WITH ( <replaceable class="parameter">storage_parameter</replaceable> [= <replaceable class="parameter">value</replaceable>] [, ... ] ) ]
     [ TABLESPACE <replaceable class="parameter">tablespace_name</replaceable> ]
     AS <replaceable>query</replaceable>
-    [ WITH [ NO ] DATA ]
+    [ WITH [ NO | OLD ] DATA ]
 </synopsis>
  </refsynopsisdiv>
 
@@ -37,7 +37,8 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
   <para>
    <command>CREATE MATERIALIZED VIEW</command> defines a materialized view of
    a query.  The query is executed and used to populate the view at the time
-   the command is issued (unless <command>WITH NO DATA</command> is used) and may be
+   the command is issued (unless <command>WITH NO DATA</command> or
+   <command>WITH OLD DATA</command> is used) and may be
    refreshed later using <command>REFRESH MATERIALIZED VIEW</command>.
   </para>
 
@@ -162,7 +163,7 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
    </varlistentry>
 
    <varlistentry>
-    <term><literal>WITH [ NO ] DATA</literal></term>
+    <term><literal>WITH [ NO | OLD ] DATA</literal></term>
     <listitem>
      <para>
       This clause specifies whether or not the materialized view should be
@@ -170,6 +171,15 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
       flagged as unscannable and cannot be queried until <command>REFRESH
       MATERIALIZED VIEW</command> is used.
      </para>
+
+     <para>
+      The form <command>WITH OLD DATA</command> keeps the already stored data
+      when replacing an existing materialized view to keep it populated.  For
+      newly created materialized views, this has the same effect as
+      <command>WITH DATA</command>.  Use this form if you want to use
+      <command>REFRESH MATERIALIZED VIEW CONCURRENTLY</command> as it requires
+      a populated materialized view.
+     </para>
     </listitem>
    </varlistentry>
 
diff --git a/src/backend/commands/createas.c b/src/backend/commands/createas.c
index 9f37ed7f177..0ed44b246bd 100644
--- a/src/backend/commands/createas.c
+++ b/src/backend/commands/createas.c
@@ -332,18 +332,26 @@ ExecCreateTableAs(ParseState *pstate, CreateTableAsStmt *stmt,
 		/* An existing materialized view can be replaced. */
 		if (is_matview && into->replace)
 		{
-			RefreshMatViewStmt *refresh;
-
 			/* Change the relation to match the new query and other options. */
-			(void) create_ctas_nodata(query->targetList, into);
+			address = create_ctas_nodata(query->targetList, into);
 
-			/* Refresh the materialized view with a fake statement. */
-			refresh = makeNode(RefreshMatViewStmt);
-			refresh->relation = into->rel;
-			refresh->skipData = into->skipData;
-			refresh->concurrent = false;
+			/*
+			 * Refresh the materialized view with a fake statement unless we
+			 * must keep the old data.
+			 */
+			if (!into->keepData)
+			{
+				RefreshMatViewStmt *refresh;
+
+				refresh = makeNode(RefreshMatViewStmt);
+				refresh->relation = into->rel;
+				refresh->skipData = into->skipData;
+				refresh->concurrent = false;
+
+				address = ExecRefreshMatView(refresh, pstate->p_sourcetext, qc);
+			}
 
-			return ExecRefreshMatView(refresh, pstate->p_sourcetext, qc);
+			return address;
 		}
 
 		return InvalidObjectAddress;
diff --git a/src/backend/parser/gram.y b/src/backend/parser/gram.y
index 8be790eaccf..e405268f413 100644
--- a/src/backend/parser/gram.y
+++ b/src/backend/parser/gram.y
@@ -4924,6 +4924,22 @@ CreateMatViewStmt:
 					$7->replace = true;
 					$$ = (Node *) ctas;
 				}
+		| CREATE OR REPLACE OptNoLog MATERIALIZED VIEW create_mv_target AS SelectStmt WITH OLD DATA_P
+				{
+					CreateTableAsStmt *ctas = makeNode(CreateTableAsStmt);
+
+					ctas->query = $9;
+					ctas->into = $7;
+					ctas->objtype = OBJECT_MATVIEW;
+					ctas->is_select_into = false;
+					ctas->if_not_exists = false;
+					/* cram additional flags into the IntoClause */
+					$7->rel->relpersistence = $4;
+					$7->skipData = false;
+					$7->keepData = true;
+					$7->replace = true;
+					$$ = (Node *) ctas;
+				}
 		;
 
 create_mv_target:
diff --git a/src/include/nodes/primnodes.h b/src/include/nodes/primnodes.h
index e800d13a6e0..5290e6c0e8a 100644
--- a/src/include/nodes/primnodes.h
+++ b/src/include/nodes/primnodes.h
@@ -169,6 +169,7 @@ typedef struct IntoClause
 	/* materialized view's SELECT query */
 	struct Query *viewQuery pg_node_attr(query_jumble_ignore);
 	bool		skipData;		/* true for WITH NO DATA */
+	bool		keepData;		/* true for WITH OLD DATA */
 	bool		replace;		/* replace existing matview? */
 } IntoClause;
 
diff --git a/src/test/regress/expected/matview.out b/src/test/regress/expected/matview.out
index d4b42da1ddf..f0f52dd1c6c 100644
--- a/src/test/regress/expected/matview.out
+++ b/src/test/regress/expected/matview.out
@@ -751,6 +751,23 @@ SELECT * FROM mvtest_replace;
  3
 (1 row)
 
+-- replace query but keep old data
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 5 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+ a 
+---
+ 3
+(1 row)
+
+REFRESH MATERIALIZED VIEW mvtest_replace;
+SELECT * FROM mvtest_replace;
+ a 
+---
+ 5
+(1 row)
+
 -- add column
 CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
   SELECT 4 AS a, 1 b;
@@ -905,3 +922,14 @@ ERROR:  syntax error at or near "NOT"
 LINE 1: CREATE OR REPLACE MATERIALIZED VIEW IF NOT EXISTS mvtest_rep...
                                                ^
 DROP MATERIALIZED VIEW mvtest_replace;
+-- Create new matview WITH OLD DATA.  This populates the new matview as if
+-- WITH DATA had been specified.
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 17 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+ a  
+----
+ 17
+(1 row)
+
diff --git a/src/test/regress/sql/matview.sql b/src/test/regress/sql/matview.sql
index d6a4dc4b857..91f547e9cb8 100644
--- a/src/test/regress/sql/matview.sql
+++ b/src/test/regress/sql/matview.sql
@@ -338,6 +338,14 @@ SELECT * FROM mvtest_replace; -- error: not populated
 REFRESH MATERIALIZED VIEW mvtest_replace;
 SELECT * FROM mvtest_replace;
 
+-- replace query but keep old data
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 5 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+REFRESH MATERIALIZED VIEW mvtest_replace;
+SELECT * FROM mvtest_replace;
+
 -- add column
 CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
   SELECT 4 AS a, 1 b;
@@ -422,3 +430,10 @@ CREATE OR REPLACE MATERIALIZED VIEW IF NOT EXISTS mvtest_replace AS
   SELECT 1 AS a;
 
 DROP MATERIALIZED VIEW mvtest_replace;
+
+-- Create new matview WITH OLD DATA.  This populates the new matview as if
+-- WITH DATA had been specified.
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 17 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
-- 
2.48.1


--aewcrbystcgftlni--





^ permalink  raw  reply  [nested|flat] 809+ messages in thread

* [PATCH v2 3/3] Replace matview WITH OLD DATA
@ 2024-07-26 21:33  Erik Wienhold <ewie@ewie.name>
  0 siblings, 0 replies; 809+ messages in thread

From: Erik Wienhold @ 2024-07-26 21:33 UTC (permalink / raw)

---
 .../sgml/ref/create_materialized_view.sgml    | 16 +++++++++--
 src/backend/commands/createas.c               | 26 +++++++++++------
 src/backend/parser/gram.y                     | 16 +++++++++++
 src/include/nodes/primnodes.h                 |  1 +
 src/test/regress/expected/matview.out         | 28 +++++++++++++++++++
 src/test/regress/sql/matview.sql              | 15 ++++++++++
 6 files changed, 90 insertions(+), 12 deletions(-)

diff --git a/doc/src/sgml/ref/create_materialized_view.sgml b/doc/src/sgml/ref/create_materialized_view.sgml
index b5a8e3441a..65633b8bfa 100644
--- a/doc/src/sgml/ref/create_materialized_view.sgml
+++ b/doc/src/sgml/ref/create_materialized_view.sgml
@@ -27,7 +27,7 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
     [ WITH ( <replaceable class="parameter">storage_parameter</replaceable> [= <replaceable class="parameter">value</replaceable>] [, ... ] ) ]
     [ TABLESPACE <replaceable class="parameter">tablespace_name</replaceable> ]
     AS <replaceable>query</replaceable>
-    [ WITH [ NO ] DATA ]
+    [ WITH [ NO | OLD ] DATA ]
 </synopsis>
  </refsynopsisdiv>
 
@@ -37,7 +37,8 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
   <para>
    <command>CREATE MATERIALIZED VIEW</command> defines a materialized view of
    a query.  The query is executed and used to populate the view at the time
-   the command is issued (unless <command>WITH NO DATA</command> is used) and may be
+   the command is issued (unless <command>WITH NO DATA</command> or
+   <command>WITH OLD DATA</command> is used) and may be
    refreshed later using <command>REFRESH MATERIALIZED VIEW</command>.
   </para>
 
@@ -160,7 +161,7 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
    </varlistentry>
 
    <varlistentry>
-    <term><literal>WITH [ NO ] DATA</literal></term>
+    <term><literal>WITH [ NO | OLD ] DATA</literal></term>
     <listitem>
      <para>
       This clause specifies whether or not the materialized view should be
@@ -168,6 +169,15 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
       flagged as unscannable and cannot be queried until <command>REFRESH
       MATERIALIZED VIEW</command> is used.
      </para>
+
+     <para>
+      The form <command>WITH OLD DATA</command> keeps the already stored data
+      when replacing an existing materialized view to keep it populated.  For
+      newly created materialized views, this has the same effect as
+      <command>WITH DATA</command>.  Use this form if you want to use
+      <command>REFRESH MATERIALIZED VIEW CONCURRENTLY</command> as it requires
+      a populated materialized view.
+     </para>
     </listitem>
    </varlistentry>
 
diff --git a/src/backend/commands/createas.c b/src/backend/commands/createas.c
index c5d78252a1..e2948ac966 100644
--- a/src/backend/commands/createas.c
+++ b/src/backend/commands/createas.c
@@ -334,18 +334,26 @@ ExecCreateTableAs(ParseState *pstate, CreateTableAsStmt *stmt,
 		/* An existing materialized view can be replaced. */
 		if (is_matview && into->replace)
 		{
-			RefreshMatViewStmt *refresh;
-
 			/* Change the relation to match the new query and other options. */
-			(void) create_ctas_nodata(query->targetList, into);
+			address = create_ctas_nodata(query->targetList, into);
 
-			/* Refresh the materialized view with a fake statement. */
-			refresh = makeNode(RefreshMatViewStmt);
-			refresh->relation = into->rel;
-			refresh->skipData = into->skipData;
-			refresh->concurrent = false;
+			/*
+			 * Refresh the materialized view with a fake statement unless we
+			 * must keep the old data.
+			 */
+			if (!into->keepData)
+			{
+				RefreshMatViewStmt *refresh;
+
+				refresh = makeNode(RefreshMatViewStmt);
+				refresh->relation = into->rel;
+				refresh->skipData = into->skipData;
+				refresh->concurrent = false;
+
+				address = ExecRefreshMatView(refresh, NULL, NULL, NULL);
+			}
 
-			return ExecRefreshMatView(refresh, NULL, NULL, NULL);
+			return address;
 		}
 
 		return InvalidObjectAddress;
diff --git a/src/backend/parser/gram.y b/src/backend/parser/gram.y
index b1100bdec1..0647955005 100644
--- a/src/backend/parser/gram.y
+++ b/src/backend/parser/gram.y
@@ -4860,6 +4860,22 @@ CreateMatViewStmt:
 					$7->replace = true;
 					$$ = (Node *) ctas;
 				}
+		| CREATE OR REPLACE OptNoLog MATERIALIZED VIEW create_mv_target AS SelectStmt WITH OLD DATA_P
+				{
+					CreateTableAsStmt *ctas = makeNode(CreateTableAsStmt);
+
+					ctas->query = $9;
+					ctas->into = $7;
+					ctas->objtype = OBJECT_MATVIEW;
+					ctas->is_select_into = false;
+					ctas->if_not_exists = false;
+					/* cram additional flags into the IntoClause */
+					$7->rel->relpersistence = $4;
+					$7->skipData = false;
+					$7->keepData = true;
+					$7->replace = true;
+					$$ = (Node *) ctas;
+				}
 		;
 
 create_mv_target:
diff --git a/src/include/nodes/primnodes.h b/src/include/nodes/primnodes.h
index 4b0ee5d10d..ae84cb522e 100644
--- a/src/include/nodes/primnodes.h
+++ b/src/include/nodes/primnodes.h
@@ -168,6 +168,7 @@ typedef struct IntoClause
 	/* materialized view's SELECT query */
 	Node	   *viewQuery pg_node_attr(query_jumble_ignore);
 	bool		skipData;		/* true for WITH NO DATA */
+	bool		keepData;		/* true for WITH OLD DATA */
 	bool		replace;		/* replace existing matview? */
 } IntoClause;
 
diff --git a/src/test/regress/expected/matview.out b/src/test/regress/expected/matview.out
index cefd0d442c..47dfd88bff 100644
--- a/src/test/regress/expected/matview.out
+++ b/src/test/regress/expected/matview.out
@@ -751,6 +751,23 @@ SELECT * FROM mvtest_replace;
  3
 (1 row)
 
+-- replace query but keep old data
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 5 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+ a 
+---
+ 3
+(1 row)
+
+REFRESH MATERIALIZED VIEW mvtest_replace;
+SELECT * FROM mvtest_replace;
+ a 
+---
+ 5
+(1 row)
+
 -- add column
 CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
   SELECT 4 AS a, 1 b;
@@ -905,3 +922,14 @@ ERROR:  syntax error at or near "NOT"
 LINE 1: CREATE OR REPLACE MATERIALIZED VIEW IF NOT EXISTS mvtest_rep...
                                                ^
 DROP MATERIALIZED VIEW mvtest_replace;
+-- Create new matview WITH OLD DATA.  This populates the new matview as if
+-- WITH DATA had been specified.
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 17 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+ a  
+----
+ 17
+(1 row)
+
diff --git a/src/test/regress/sql/matview.sql b/src/test/regress/sql/matview.sql
index c12f0243c9..b268237c24 100644
--- a/src/test/regress/sql/matview.sql
+++ b/src/test/regress/sql/matview.sql
@@ -338,6 +338,14 @@ SELECT * FROM mvtest_replace; -- error: not populated
 REFRESH MATERIALIZED VIEW mvtest_replace;
 SELECT * FROM mvtest_replace;
 
+-- replace query but keep old data
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 5 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+REFRESH MATERIALIZED VIEW mvtest_replace;
+SELECT * FROM mvtest_replace;
+
 -- add column
 CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
   SELECT 4 AS a, 1 b;
@@ -422,3 +430,10 @@ CREATE OR REPLACE MATERIALIZED VIEW IF NOT EXISTS mvtest_replace AS
   SELECT 1 AS a;
 
 DROP MATERIALIZED VIEW mvtest_replace;
+
+-- Create new matview WITH OLD DATA.  This populates the new matview as if
+-- WITH DATA had been specified.
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 17 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
-- 
2.45.2


--nrp556lrhtfteavd--





^ permalink  raw  reply  [nested|flat] 809+ messages in thread

* [PATCH v3 3/3] Replace matview WITH OLD DATA
@ 2024-07-26 21:33  Erik Wienhold <ewie@ewie.name>
  0 siblings, 0 replies; 809+ messages in thread

From: Erik Wienhold @ 2024-07-26 21:33 UTC (permalink / raw)

---
 .../sgml/ref/create_materialized_view.sgml    | 16 +++++++++--
 src/backend/commands/createas.c               | 26 +++++++++++------
 src/backend/parser/gram.y                     | 16 +++++++++++
 src/include/nodes/primnodes.h                 |  1 +
 src/test/regress/expected/matview.out         | 28 +++++++++++++++++++
 src/test/regress/sql/matview.sql              | 15 ++++++++++
 6 files changed, 90 insertions(+), 12 deletions(-)

diff --git a/doc/src/sgml/ref/create_materialized_view.sgml b/doc/src/sgml/ref/create_materialized_view.sgml
index b5a8e3441a..65633b8bfa 100644
--- a/doc/src/sgml/ref/create_materialized_view.sgml
+++ b/doc/src/sgml/ref/create_materialized_view.sgml
@@ -27,7 +27,7 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
     [ WITH ( <replaceable class="parameter">storage_parameter</replaceable> [= <replaceable class="parameter">value</replaceable>] [, ... ] ) ]
     [ TABLESPACE <replaceable class="parameter">tablespace_name</replaceable> ]
     AS <replaceable>query</replaceable>
-    [ WITH [ NO ] DATA ]
+    [ WITH [ NO | OLD ] DATA ]
 </synopsis>
  </refsynopsisdiv>
 
@@ -37,7 +37,8 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
   <para>
    <command>CREATE MATERIALIZED VIEW</command> defines a materialized view of
    a query.  The query is executed and used to populate the view at the time
-   the command is issued (unless <command>WITH NO DATA</command> is used) and may be
+   the command is issued (unless <command>WITH NO DATA</command> or
+   <command>WITH OLD DATA</command> is used) and may be
    refreshed later using <command>REFRESH MATERIALIZED VIEW</command>.
   </para>
 
@@ -160,7 +161,7 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
    </varlistentry>
 
    <varlistentry>
-    <term><literal>WITH [ NO ] DATA</literal></term>
+    <term><literal>WITH [ NO | OLD ] DATA</literal></term>
     <listitem>
      <para>
       This clause specifies whether or not the materialized view should be
@@ -168,6 +169,15 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
       flagged as unscannable and cannot be queried until <command>REFRESH
       MATERIALIZED VIEW</command> is used.
      </para>
+
+     <para>
+      The form <command>WITH OLD DATA</command> keeps the already stored data
+      when replacing an existing materialized view to keep it populated.  For
+      newly created materialized views, this has the same effect as
+      <command>WITH DATA</command>.  Use this form if you want to use
+      <command>REFRESH MATERIALIZED VIEW CONCURRENTLY</command> as it requires
+      a populated materialized view.
+     </para>
     </listitem>
    </varlistentry>
 
diff --git a/src/backend/commands/createas.c b/src/backend/commands/createas.c
index e4ed3748f9..96e7b81966 100644
--- a/src/backend/commands/createas.c
+++ b/src/backend/commands/createas.c
@@ -331,18 +331,26 @@ ExecCreateTableAs(ParseState *pstate, CreateTableAsStmt *stmt,
 		/* An existing materialized view can be replaced. */
 		if (is_matview && into->replace)
 		{
-			RefreshMatViewStmt *refresh;
-
 			/* Change the relation to match the new query and other options. */
-			(void) create_ctas_nodata(query->targetList, into);
+			address = create_ctas_nodata(query->targetList, into);
 
-			/* Refresh the materialized view with a fake statement. */
-			refresh = makeNode(RefreshMatViewStmt);
-			refresh->relation = into->rel;
-			refresh->skipData = into->skipData;
-			refresh->concurrent = false;
+			/*
+			 * Refresh the materialized view with a fake statement unless we
+			 * must keep the old data.
+			 */
+			if (!into->keepData)
+			{
+				RefreshMatViewStmt *refresh;
+
+				refresh = makeNode(RefreshMatViewStmt);
+				refresh->relation = into->rel;
+				refresh->skipData = into->skipData;
+				refresh->concurrent = false;
+
+				address = ExecRefreshMatView(refresh, NULL, NULL);
+			}
 
-			return ExecRefreshMatView(refresh, NULL, NULL);
+			return address;
 		}
 
 		return InvalidObjectAddress;
diff --git a/src/backend/parser/gram.y b/src/backend/parser/gram.y
index 4b939ea7ca..e45ebb24f8 100644
--- a/src/backend/parser/gram.y
+++ b/src/backend/parser/gram.y
@@ -4808,6 +4808,22 @@ CreateMatViewStmt:
 					$7->replace = true;
 					$$ = (Node *) ctas;
 				}
+		| CREATE OR REPLACE OptNoLog MATERIALIZED VIEW create_mv_target AS SelectStmt WITH OLD DATA_P
+				{
+					CreateTableAsStmt *ctas = makeNode(CreateTableAsStmt);
+
+					ctas->query = $9;
+					ctas->into = $7;
+					ctas->objtype = OBJECT_MATVIEW;
+					ctas->is_select_into = false;
+					ctas->if_not_exists = false;
+					/* cram additional flags into the IntoClause */
+					$7->rel->relpersistence = $4;
+					$7->skipData = false;
+					$7->keepData = true;
+					$7->replace = true;
+					$$ = (Node *) ctas;
+				}
 		;
 
 create_mv_target:
diff --git a/src/include/nodes/primnodes.h b/src/include/nodes/primnodes.h
index 4b0ee5d10d..ae84cb522e 100644
--- a/src/include/nodes/primnodes.h
+++ b/src/include/nodes/primnodes.h
@@ -168,6 +168,7 @@ typedef struct IntoClause
 	/* materialized view's SELECT query */
 	Node	   *viewQuery pg_node_attr(query_jumble_ignore);
 	bool		skipData;		/* true for WITH NO DATA */
+	bool		keepData;		/* true for WITH OLD DATA */
 	bool		replace;		/* replace existing matview? */
 } IntoClause;
 
diff --git a/src/test/regress/expected/matview.out b/src/test/regress/expected/matview.out
index cefd0d442c..47dfd88bff 100644
--- a/src/test/regress/expected/matview.out
+++ b/src/test/regress/expected/matview.out
@@ -751,6 +751,23 @@ SELECT * FROM mvtest_replace;
  3
 (1 row)
 
+-- replace query but keep old data
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 5 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+ a 
+---
+ 3
+(1 row)
+
+REFRESH MATERIALIZED VIEW mvtest_replace;
+SELECT * FROM mvtest_replace;
+ a 
+---
+ 5
+(1 row)
+
 -- add column
 CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
   SELECT 4 AS a, 1 b;
@@ -905,3 +922,14 @@ ERROR:  syntax error at or near "NOT"
 LINE 1: CREATE OR REPLACE MATERIALIZED VIEW IF NOT EXISTS mvtest_rep...
                                                ^
 DROP MATERIALIZED VIEW mvtest_replace;
+-- Create new matview WITH OLD DATA.  This populates the new matview as if
+-- WITH DATA had been specified.
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 17 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+ a  
+----
+ 17
+(1 row)
+
diff --git a/src/test/regress/sql/matview.sql b/src/test/regress/sql/matview.sql
index c12f0243c9..b268237c24 100644
--- a/src/test/regress/sql/matview.sql
+++ b/src/test/regress/sql/matview.sql
@@ -338,6 +338,14 @@ SELECT * FROM mvtest_replace; -- error: not populated
 REFRESH MATERIALIZED VIEW mvtest_replace;
 SELECT * FROM mvtest_replace;
 
+-- replace query but keep old data
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 5 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+REFRESH MATERIALIZED VIEW mvtest_replace;
+SELECT * FROM mvtest_replace;
+
 -- add column
 CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
   SELECT 4 AS a, 1 b;
@@ -422,3 +430,10 @@ CREATE OR REPLACE MATERIALIZED VIEW IF NOT EXISTS mvtest_replace AS
   SELECT 1 AS a;
 
 DROP MATERIALIZED VIEW mvtest_replace;
+
+-- Create new matview WITH OLD DATA.  This populates the new matview as if
+-- WITH DATA had been specified.
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 17 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
-- 
2.46.0


--muysnh7l3kienazz--





^ permalink  raw  reply  [nested|flat] 809+ messages in thread

* [PATCH v4 3/3] Replace matview WITH OLD DATA
@ 2024-07-26 21:33  Erik Wienhold <ewie@ewie.name>
  0 siblings, 0 replies; 809+ messages in thread

From: Erik Wienhold @ 2024-07-26 21:33 UTC (permalink / raw)

---
 .../sgml/ref/create_materialized_view.sgml    | 16 +++++++++--
 src/backend/commands/createas.c               | 26 +++++++++++------
 src/backend/parser/gram.y                     | 16 +++++++++++
 src/include/nodes/primnodes.h                 |  1 +
 src/test/regress/expected/matview.out         | 28 +++++++++++++++++++
 src/test/regress/sql/matview.sql              | 15 ++++++++++
 6 files changed, 90 insertions(+), 12 deletions(-)

diff --git a/doc/src/sgml/ref/create_materialized_view.sgml b/doc/src/sgml/ref/create_materialized_view.sgml
index 5e03320eb7..1352e9de40 100644
--- a/doc/src/sgml/ref/create_materialized_view.sgml
+++ b/doc/src/sgml/ref/create_materialized_view.sgml
@@ -27,7 +27,7 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
     [ WITH ( <replaceable class="parameter">storage_parameter</replaceable> [= <replaceable class="parameter">value</replaceable>] [, ... ] ) ]
     [ TABLESPACE <replaceable class="parameter">tablespace_name</replaceable> ]
     AS <replaceable>query</replaceable>
-    [ WITH [ NO ] DATA ]
+    [ WITH [ NO | OLD ] DATA ]
 </synopsis>
  </refsynopsisdiv>
 
@@ -37,7 +37,8 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
   <para>
    <command>CREATE MATERIALIZED VIEW</command> defines a materialized view of
    a query.  The query is executed and used to populate the view at the time
-   the command is issued (unless <command>WITH NO DATA</command> is used) and may be
+   the command is issued (unless <command>WITH NO DATA</command> or
+   <command>WITH OLD DATA</command> is used) and may be
    refreshed later using <command>REFRESH MATERIALIZED VIEW</command>.
   </para>
 
@@ -162,7 +163,7 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
    </varlistentry>
 
    <varlistentry>
-    <term><literal>WITH [ NO ] DATA</literal></term>
+    <term><literal>WITH [ NO | OLD ] DATA</literal></term>
     <listitem>
      <para>
       This clause specifies whether or not the materialized view should be
@@ -170,6 +171,15 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
       flagged as unscannable and cannot be queried until <command>REFRESH
       MATERIALIZED VIEW</command> is used.
      </para>
+
+     <para>
+      The form <command>WITH OLD DATA</command> keeps the already stored data
+      when replacing an existing materialized view to keep it populated.  For
+      newly created materialized views, this has the same effect as
+      <command>WITH DATA</command>.  Use this form if you want to use
+      <command>REFRESH MATERIALIZED VIEW CONCURRENTLY</command> as it requires
+      a populated materialized view.
+     </para>
     </listitem>
    </varlistentry>
 
diff --git a/src/backend/commands/createas.c b/src/backend/commands/createas.c
index d4bc5e5c08..8db000554c 100644
--- a/src/backend/commands/createas.c
+++ b/src/backend/commands/createas.c
@@ -332,18 +332,26 @@ ExecCreateTableAs(ParseState *pstate, CreateTableAsStmt *stmt,
 		/* An existing materialized view can be replaced. */
 		if (is_matview && into->replace)
 		{
-			RefreshMatViewStmt *refresh;
-
 			/* Change the relation to match the new query and other options. */
-			(void) create_ctas_nodata(query->targetList, into);
+			address = create_ctas_nodata(query->targetList, into);
 
-			/* Refresh the materialized view with a fake statement. */
-			refresh = makeNode(RefreshMatViewStmt);
-			refresh->relation = into->rel;
-			refresh->skipData = into->skipData;
-			refresh->concurrent = false;
+			/*
+			 * Refresh the materialized view with a fake statement unless we
+			 * must keep the old data.
+			 */
+			if (!into->keepData)
+			{
+				RefreshMatViewStmt *refresh;
+
+				refresh = makeNode(RefreshMatViewStmt);
+				refresh->relation = into->rel;
+				refresh->skipData = into->skipData;
+				refresh->concurrent = false;
+
+				address = ExecRefreshMatView(refresh, NULL, NULL);
+			}
 
-			return ExecRefreshMatView(refresh, NULL, NULL);
+			return address;
 		}
 
 		return InvalidObjectAddress;
diff --git a/src/backend/parser/gram.y b/src/backend/parser/gram.y
index dadc6b630a..1be1a95cd9 100644
--- a/src/backend/parser/gram.y
+++ b/src/backend/parser/gram.y
@@ -4838,6 +4838,22 @@ CreateMatViewStmt:
 					$7->replace = true;
 					$$ = (Node *) ctas;
 				}
+		| CREATE OR REPLACE OptNoLog MATERIALIZED VIEW create_mv_target AS SelectStmt WITH OLD DATA_P
+				{
+					CreateTableAsStmt *ctas = makeNode(CreateTableAsStmt);
+
+					ctas->query = $9;
+					ctas->into = $7;
+					ctas->objtype = OBJECT_MATVIEW;
+					ctas->is_select_into = false;
+					ctas->if_not_exists = false;
+					/* cram additional flags into the IntoClause */
+					$7->rel->relpersistence = $4;
+					$7->skipData = false;
+					$7->keepData = true;
+					$7->replace = true;
+					$$ = (Node *) ctas;
+				}
 		;
 
 create_mv_target:
diff --git a/src/include/nodes/primnodes.h b/src/include/nodes/primnodes.h
index 533fa847ab..6fa3291c64 100644
--- a/src/include/nodes/primnodes.h
+++ b/src/include/nodes/primnodes.h
@@ -168,6 +168,7 @@ typedef struct IntoClause
 	/* materialized view's SELECT query */
 	struct Query *viewQuery pg_node_attr(query_jumble_ignore);
 	bool		skipData;		/* true for WITH NO DATA */
+	bool		keepData;		/* true for WITH OLD DATA */
 	bool		replace;		/* replace existing matview? */
 } IntoClause;
 
diff --git a/src/test/regress/expected/matview.out b/src/test/regress/expected/matview.out
index cefd0d442c..47dfd88bff 100644
--- a/src/test/regress/expected/matview.out
+++ b/src/test/regress/expected/matview.out
@@ -751,6 +751,23 @@ SELECT * FROM mvtest_replace;
  3
 (1 row)
 
+-- replace query but keep old data
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 5 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+ a 
+---
+ 3
+(1 row)
+
+REFRESH MATERIALIZED VIEW mvtest_replace;
+SELECT * FROM mvtest_replace;
+ a 
+---
+ 5
+(1 row)
+
 -- add column
 CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
   SELECT 4 AS a, 1 b;
@@ -905,3 +922,14 @@ ERROR:  syntax error at or near "NOT"
 LINE 1: CREATE OR REPLACE MATERIALIZED VIEW IF NOT EXISTS mvtest_rep...
                                                ^
 DROP MATERIALIZED VIEW mvtest_replace;
+-- Create new matview WITH OLD DATA.  This populates the new matview as if
+-- WITH DATA had been specified.
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 17 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+ a  
+----
+ 17
+(1 row)
+
diff --git a/src/test/regress/sql/matview.sql b/src/test/regress/sql/matview.sql
index c12f0243c9..b268237c24 100644
--- a/src/test/regress/sql/matview.sql
+++ b/src/test/regress/sql/matview.sql
@@ -338,6 +338,14 @@ SELECT * FROM mvtest_replace; -- error: not populated
 REFRESH MATERIALIZED VIEW mvtest_replace;
 SELECT * FROM mvtest_replace;
 
+-- replace query but keep old data
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 5 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+REFRESH MATERIALIZED VIEW mvtest_replace;
+SELECT * FROM mvtest_replace;
+
 -- add column
 CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
   SELECT 4 AS a, 1 b;
@@ -422,3 +430,10 @@ CREATE OR REPLACE MATERIALIZED VIEW IF NOT EXISTS mvtest_replace AS
   SELECT 1 AS a;
 
 DROP MATERIALIZED VIEW mvtest_replace;
+
+-- Create new matview WITH OLD DATA.  This populates the new matview as if
+-- WITH DATA had been specified.
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 17 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
-- 
2.47.0


--hht4bymbvbva5al5--





^ permalink  raw  reply  [nested|flat] 809+ messages in thread

* [PATCH v6 3/3] Replace matview WITH OLD DATA
@ 2024-07-26 21:33  Erik Wienhold <ewie@ewie.name>
  0 siblings, 0 replies; 809+ messages in thread

From: Erik Wienhold @ 2024-07-26 21:33 UTC (permalink / raw)

---
 .../sgml/ref/create_materialized_view.sgml    | 16 +++++++++--
 src/backend/commands/createas.c               | 26 +++++++++++------
 src/backend/parser/gram.y                     | 16 +++++++++++
 src/include/nodes/primnodes.h                 |  1 +
 src/test/regress/expected/matview.out         | 28 +++++++++++++++++++
 src/test/regress/sql/matview.sql              | 15 ++++++++++
 6 files changed, 90 insertions(+), 12 deletions(-)

diff --git a/doc/src/sgml/ref/create_materialized_view.sgml b/doc/src/sgml/ref/create_materialized_view.sgml
index 5e03320eb73..1352e9de409 100644
--- a/doc/src/sgml/ref/create_materialized_view.sgml
+++ b/doc/src/sgml/ref/create_materialized_view.sgml
@@ -27,7 +27,7 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
     [ WITH ( <replaceable class="parameter">storage_parameter</replaceable> [= <replaceable class="parameter">value</replaceable>] [, ... ] ) ]
     [ TABLESPACE <replaceable class="parameter">tablespace_name</replaceable> ]
     AS <replaceable>query</replaceable>
-    [ WITH [ NO ] DATA ]
+    [ WITH [ NO | OLD ] DATA ]
 </synopsis>
  </refsynopsisdiv>
 
@@ -37,7 +37,8 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
   <para>
    <command>CREATE MATERIALIZED VIEW</command> defines a materialized view of
    a query.  The query is executed and used to populate the view at the time
-   the command is issued (unless <command>WITH NO DATA</command> is used) and may be
+   the command is issued (unless <command>WITH NO DATA</command> or
+   <command>WITH OLD DATA</command> is used) and may be
    refreshed later using <command>REFRESH MATERIALIZED VIEW</command>.
   </para>
 
@@ -162,7 +163,7 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
    </varlistentry>
 
    <varlistentry>
-    <term><literal>WITH [ NO ] DATA</literal></term>
+    <term><literal>WITH [ NO | OLD ] DATA</literal></term>
     <listitem>
      <para>
       This clause specifies whether or not the materialized view should be
@@ -170,6 +171,15 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
       flagged as unscannable and cannot be queried until <command>REFRESH
       MATERIALIZED VIEW</command> is used.
      </para>
+
+     <para>
+      The form <command>WITH OLD DATA</command> keeps the already stored data
+      when replacing an existing materialized view to keep it populated.  For
+      newly created materialized views, this has the same effect as
+      <command>WITH DATA</command>.  Use this form if you want to use
+      <command>REFRESH MATERIALIZED VIEW CONCURRENTLY</command> as it requires
+      a populated materialized view.
+     </para>
     </listitem>
    </varlistentry>
 
diff --git a/src/backend/commands/createas.c b/src/backend/commands/createas.c
index 9f37ed7f177..0ed44b246bd 100644
--- a/src/backend/commands/createas.c
+++ b/src/backend/commands/createas.c
@@ -332,18 +332,26 @@ ExecCreateTableAs(ParseState *pstate, CreateTableAsStmt *stmt,
 		/* An existing materialized view can be replaced. */
 		if (is_matview && into->replace)
 		{
-			RefreshMatViewStmt *refresh;
-
 			/* Change the relation to match the new query and other options. */
-			(void) create_ctas_nodata(query->targetList, into);
+			address = create_ctas_nodata(query->targetList, into);
 
-			/* Refresh the materialized view with a fake statement. */
-			refresh = makeNode(RefreshMatViewStmt);
-			refresh->relation = into->rel;
-			refresh->skipData = into->skipData;
-			refresh->concurrent = false;
+			/*
+			 * Refresh the materialized view with a fake statement unless we
+			 * must keep the old data.
+			 */
+			if (!into->keepData)
+			{
+				RefreshMatViewStmt *refresh;
+
+				refresh = makeNode(RefreshMatViewStmt);
+				refresh->relation = into->rel;
+				refresh->skipData = into->skipData;
+				refresh->concurrent = false;
+
+				address = ExecRefreshMatView(refresh, pstate->p_sourcetext, qc);
+			}
 
-			return ExecRefreshMatView(refresh, pstate->p_sourcetext, qc);
+			return address;
 		}
 
 		return InvalidObjectAddress;
diff --git a/src/backend/parser/gram.y b/src/backend/parser/gram.y
index 8be790eaccf..e405268f413 100644
--- a/src/backend/parser/gram.y
+++ b/src/backend/parser/gram.y
@@ -4924,6 +4924,22 @@ CreateMatViewStmt:
 					$7->replace = true;
 					$$ = (Node *) ctas;
 				}
+		| CREATE OR REPLACE OptNoLog MATERIALIZED VIEW create_mv_target AS SelectStmt WITH OLD DATA_P
+				{
+					CreateTableAsStmt *ctas = makeNode(CreateTableAsStmt);
+
+					ctas->query = $9;
+					ctas->into = $7;
+					ctas->objtype = OBJECT_MATVIEW;
+					ctas->is_select_into = false;
+					ctas->if_not_exists = false;
+					/* cram additional flags into the IntoClause */
+					$7->rel->relpersistence = $4;
+					$7->skipData = false;
+					$7->keepData = true;
+					$7->replace = true;
+					$$ = (Node *) ctas;
+				}
 		;
 
 create_mv_target:
diff --git a/src/include/nodes/primnodes.h b/src/include/nodes/primnodes.h
index e800d13a6e0..5290e6c0e8a 100644
--- a/src/include/nodes/primnodes.h
+++ b/src/include/nodes/primnodes.h
@@ -169,6 +169,7 @@ typedef struct IntoClause
 	/* materialized view's SELECT query */
 	struct Query *viewQuery pg_node_attr(query_jumble_ignore);
 	bool		skipData;		/* true for WITH NO DATA */
+	bool		keepData;		/* true for WITH OLD DATA */
 	bool		replace;		/* replace existing matview? */
 } IntoClause;
 
diff --git a/src/test/regress/expected/matview.out b/src/test/regress/expected/matview.out
index d4b42da1ddf..f0f52dd1c6c 100644
--- a/src/test/regress/expected/matview.out
+++ b/src/test/regress/expected/matview.out
@@ -751,6 +751,23 @@ SELECT * FROM mvtest_replace;
  3
 (1 row)
 
+-- replace query but keep old data
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 5 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+ a 
+---
+ 3
+(1 row)
+
+REFRESH MATERIALIZED VIEW mvtest_replace;
+SELECT * FROM mvtest_replace;
+ a 
+---
+ 5
+(1 row)
+
 -- add column
 CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
   SELECT 4 AS a, 1 b;
@@ -905,3 +922,14 @@ ERROR:  syntax error at or near "NOT"
 LINE 1: CREATE OR REPLACE MATERIALIZED VIEW IF NOT EXISTS mvtest_rep...
                                                ^
 DROP MATERIALIZED VIEW mvtest_replace;
+-- Create new matview WITH OLD DATA.  This populates the new matview as if
+-- WITH DATA had been specified.
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 17 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+ a  
+----
+ 17
+(1 row)
+
diff --git a/src/test/regress/sql/matview.sql b/src/test/regress/sql/matview.sql
index d6a4dc4b857..91f547e9cb8 100644
--- a/src/test/regress/sql/matview.sql
+++ b/src/test/regress/sql/matview.sql
@@ -338,6 +338,14 @@ SELECT * FROM mvtest_replace; -- error: not populated
 REFRESH MATERIALIZED VIEW mvtest_replace;
 SELECT * FROM mvtest_replace;
 
+-- replace query but keep old data
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 5 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+REFRESH MATERIALIZED VIEW mvtest_replace;
+SELECT * FROM mvtest_replace;
+
 -- add column
 CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
   SELECT 4 AS a, 1 b;
@@ -422,3 +430,10 @@ CREATE OR REPLACE MATERIALIZED VIEW IF NOT EXISTS mvtest_replace AS
   SELECT 1 AS a;
 
 DROP MATERIALIZED VIEW mvtest_replace;
+
+-- Create new matview WITH OLD DATA.  This populates the new matview as if
+-- WITH DATA had been specified.
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 17 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
-- 
2.48.1


--aewcrbystcgftlni--





^ permalink  raw  reply  [nested|flat] 809+ messages in thread

* [PATCH v2 3/3] Replace matview WITH OLD DATA
@ 2024-07-26 21:33  Erik Wienhold <ewie@ewie.name>
  0 siblings, 0 replies; 809+ messages in thread

From: Erik Wienhold @ 2024-07-26 21:33 UTC (permalink / raw)

---
 .../sgml/ref/create_materialized_view.sgml    | 16 +++++++++--
 src/backend/commands/createas.c               | 26 +++++++++++------
 src/backend/parser/gram.y                     | 16 +++++++++++
 src/include/nodes/primnodes.h                 |  1 +
 src/test/regress/expected/matview.out         | 28 +++++++++++++++++++
 src/test/regress/sql/matview.sql              | 15 ++++++++++
 6 files changed, 90 insertions(+), 12 deletions(-)

diff --git a/doc/src/sgml/ref/create_materialized_view.sgml b/doc/src/sgml/ref/create_materialized_view.sgml
index b5a8e3441a..65633b8bfa 100644
--- a/doc/src/sgml/ref/create_materialized_view.sgml
+++ b/doc/src/sgml/ref/create_materialized_view.sgml
@@ -27,7 +27,7 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
     [ WITH ( <replaceable class="parameter">storage_parameter</replaceable> [= <replaceable class="parameter">value</replaceable>] [, ... ] ) ]
     [ TABLESPACE <replaceable class="parameter">tablespace_name</replaceable> ]
     AS <replaceable>query</replaceable>
-    [ WITH [ NO ] DATA ]
+    [ WITH [ NO | OLD ] DATA ]
 </synopsis>
  </refsynopsisdiv>
 
@@ -37,7 +37,8 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
   <para>
    <command>CREATE MATERIALIZED VIEW</command> defines a materialized view of
    a query.  The query is executed and used to populate the view at the time
-   the command is issued (unless <command>WITH NO DATA</command> is used) and may be
+   the command is issued (unless <command>WITH NO DATA</command> or
+   <command>WITH OLD DATA</command> is used) and may be
    refreshed later using <command>REFRESH MATERIALIZED VIEW</command>.
   </para>
 
@@ -160,7 +161,7 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
    </varlistentry>
 
    <varlistentry>
-    <term><literal>WITH [ NO ] DATA</literal></term>
+    <term><literal>WITH [ NO | OLD ] DATA</literal></term>
     <listitem>
      <para>
       This clause specifies whether or not the materialized view should be
@@ -168,6 +169,15 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
       flagged as unscannable and cannot be queried until <command>REFRESH
       MATERIALIZED VIEW</command> is used.
      </para>
+
+     <para>
+      The form <command>WITH OLD DATA</command> keeps the already stored data
+      when replacing an existing materialized view to keep it populated.  For
+      newly created materialized views, this has the same effect as
+      <command>WITH DATA</command>.  Use this form if you want to use
+      <command>REFRESH MATERIALIZED VIEW CONCURRENTLY</command> as it requires
+      a populated materialized view.
+     </para>
     </listitem>
    </varlistentry>
 
diff --git a/src/backend/commands/createas.c b/src/backend/commands/createas.c
index c5d78252a1..e2948ac966 100644
--- a/src/backend/commands/createas.c
+++ b/src/backend/commands/createas.c
@@ -334,18 +334,26 @@ ExecCreateTableAs(ParseState *pstate, CreateTableAsStmt *stmt,
 		/* An existing materialized view can be replaced. */
 		if (is_matview && into->replace)
 		{
-			RefreshMatViewStmt *refresh;
-
 			/* Change the relation to match the new query and other options. */
-			(void) create_ctas_nodata(query->targetList, into);
+			address = create_ctas_nodata(query->targetList, into);
 
-			/* Refresh the materialized view with a fake statement. */
-			refresh = makeNode(RefreshMatViewStmt);
-			refresh->relation = into->rel;
-			refresh->skipData = into->skipData;
-			refresh->concurrent = false;
+			/*
+			 * Refresh the materialized view with a fake statement unless we
+			 * must keep the old data.
+			 */
+			if (!into->keepData)
+			{
+				RefreshMatViewStmt *refresh;
+
+				refresh = makeNode(RefreshMatViewStmt);
+				refresh->relation = into->rel;
+				refresh->skipData = into->skipData;
+				refresh->concurrent = false;
+
+				address = ExecRefreshMatView(refresh, NULL, NULL, NULL);
+			}
 
-			return ExecRefreshMatView(refresh, NULL, NULL, NULL);
+			return address;
 		}
 
 		return InvalidObjectAddress;
diff --git a/src/backend/parser/gram.y b/src/backend/parser/gram.y
index b1100bdec1..0647955005 100644
--- a/src/backend/parser/gram.y
+++ b/src/backend/parser/gram.y
@@ -4860,6 +4860,22 @@ CreateMatViewStmt:
 					$7->replace = true;
 					$$ = (Node *) ctas;
 				}
+		| CREATE OR REPLACE OptNoLog MATERIALIZED VIEW create_mv_target AS SelectStmt WITH OLD DATA_P
+				{
+					CreateTableAsStmt *ctas = makeNode(CreateTableAsStmt);
+
+					ctas->query = $9;
+					ctas->into = $7;
+					ctas->objtype = OBJECT_MATVIEW;
+					ctas->is_select_into = false;
+					ctas->if_not_exists = false;
+					/* cram additional flags into the IntoClause */
+					$7->rel->relpersistence = $4;
+					$7->skipData = false;
+					$7->keepData = true;
+					$7->replace = true;
+					$$ = (Node *) ctas;
+				}
 		;
 
 create_mv_target:
diff --git a/src/include/nodes/primnodes.h b/src/include/nodes/primnodes.h
index 4b0ee5d10d..ae84cb522e 100644
--- a/src/include/nodes/primnodes.h
+++ b/src/include/nodes/primnodes.h
@@ -168,6 +168,7 @@ typedef struct IntoClause
 	/* materialized view's SELECT query */
 	Node	   *viewQuery pg_node_attr(query_jumble_ignore);
 	bool		skipData;		/* true for WITH NO DATA */
+	bool		keepData;		/* true for WITH OLD DATA */
 	bool		replace;		/* replace existing matview? */
 } IntoClause;
 
diff --git a/src/test/regress/expected/matview.out b/src/test/regress/expected/matview.out
index cefd0d442c..47dfd88bff 100644
--- a/src/test/regress/expected/matview.out
+++ b/src/test/regress/expected/matview.out
@@ -751,6 +751,23 @@ SELECT * FROM mvtest_replace;
  3
 (1 row)
 
+-- replace query but keep old data
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 5 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+ a 
+---
+ 3
+(1 row)
+
+REFRESH MATERIALIZED VIEW mvtest_replace;
+SELECT * FROM mvtest_replace;
+ a 
+---
+ 5
+(1 row)
+
 -- add column
 CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
   SELECT 4 AS a, 1 b;
@@ -905,3 +922,14 @@ ERROR:  syntax error at or near "NOT"
 LINE 1: CREATE OR REPLACE MATERIALIZED VIEW IF NOT EXISTS mvtest_rep...
                                                ^
 DROP MATERIALIZED VIEW mvtest_replace;
+-- Create new matview WITH OLD DATA.  This populates the new matview as if
+-- WITH DATA had been specified.
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 17 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+ a  
+----
+ 17
+(1 row)
+
diff --git a/src/test/regress/sql/matview.sql b/src/test/regress/sql/matview.sql
index c12f0243c9..b268237c24 100644
--- a/src/test/regress/sql/matview.sql
+++ b/src/test/regress/sql/matview.sql
@@ -338,6 +338,14 @@ SELECT * FROM mvtest_replace; -- error: not populated
 REFRESH MATERIALIZED VIEW mvtest_replace;
 SELECT * FROM mvtest_replace;
 
+-- replace query but keep old data
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 5 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+REFRESH MATERIALIZED VIEW mvtest_replace;
+SELECT * FROM mvtest_replace;
+
 -- add column
 CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
   SELECT 4 AS a, 1 b;
@@ -422,3 +430,10 @@ CREATE OR REPLACE MATERIALIZED VIEW IF NOT EXISTS mvtest_replace AS
   SELECT 1 AS a;
 
 DROP MATERIALIZED VIEW mvtest_replace;
+
+-- Create new matview WITH OLD DATA.  This populates the new matview as if
+-- WITH DATA had been specified.
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 17 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
-- 
2.45.2


--nrp556lrhtfteavd--





^ permalink  raw  reply  [nested|flat] 809+ messages in thread

* [PATCH v3 3/3] Replace matview WITH OLD DATA
@ 2024-07-26 21:33  Erik Wienhold <ewie@ewie.name>
  0 siblings, 0 replies; 809+ messages in thread

From: Erik Wienhold @ 2024-07-26 21:33 UTC (permalink / raw)

---
 .../sgml/ref/create_materialized_view.sgml    | 16 +++++++++--
 src/backend/commands/createas.c               | 26 +++++++++++------
 src/backend/parser/gram.y                     | 16 +++++++++++
 src/include/nodes/primnodes.h                 |  1 +
 src/test/regress/expected/matview.out         | 28 +++++++++++++++++++
 src/test/regress/sql/matview.sql              | 15 ++++++++++
 6 files changed, 90 insertions(+), 12 deletions(-)

diff --git a/doc/src/sgml/ref/create_materialized_view.sgml b/doc/src/sgml/ref/create_materialized_view.sgml
index b5a8e3441a..65633b8bfa 100644
--- a/doc/src/sgml/ref/create_materialized_view.sgml
+++ b/doc/src/sgml/ref/create_materialized_view.sgml
@@ -27,7 +27,7 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
     [ WITH ( <replaceable class="parameter">storage_parameter</replaceable> [= <replaceable class="parameter">value</replaceable>] [, ... ] ) ]
     [ TABLESPACE <replaceable class="parameter">tablespace_name</replaceable> ]
     AS <replaceable>query</replaceable>
-    [ WITH [ NO ] DATA ]
+    [ WITH [ NO | OLD ] DATA ]
 </synopsis>
  </refsynopsisdiv>
 
@@ -37,7 +37,8 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
   <para>
    <command>CREATE MATERIALIZED VIEW</command> defines a materialized view of
    a query.  The query is executed and used to populate the view at the time
-   the command is issued (unless <command>WITH NO DATA</command> is used) and may be
+   the command is issued (unless <command>WITH NO DATA</command> or
+   <command>WITH OLD DATA</command> is used) and may be
    refreshed later using <command>REFRESH MATERIALIZED VIEW</command>.
   </para>
 
@@ -160,7 +161,7 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
    </varlistentry>
 
    <varlistentry>
-    <term><literal>WITH [ NO ] DATA</literal></term>
+    <term><literal>WITH [ NO | OLD ] DATA</literal></term>
     <listitem>
      <para>
       This clause specifies whether or not the materialized view should be
@@ -168,6 +169,15 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
       flagged as unscannable and cannot be queried until <command>REFRESH
       MATERIALIZED VIEW</command> is used.
      </para>
+
+     <para>
+      The form <command>WITH OLD DATA</command> keeps the already stored data
+      when replacing an existing materialized view to keep it populated.  For
+      newly created materialized views, this has the same effect as
+      <command>WITH DATA</command>.  Use this form if you want to use
+      <command>REFRESH MATERIALIZED VIEW CONCURRENTLY</command> as it requires
+      a populated materialized view.
+     </para>
     </listitem>
    </varlistentry>
 
diff --git a/src/backend/commands/createas.c b/src/backend/commands/createas.c
index e4ed3748f9..96e7b81966 100644
--- a/src/backend/commands/createas.c
+++ b/src/backend/commands/createas.c
@@ -331,18 +331,26 @@ ExecCreateTableAs(ParseState *pstate, CreateTableAsStmt *stmt,
 		/* An existing materialized view can be replaced. */
 		if (is_matview && into->replace)
 		{
-			RefreshMatViewStmt *refresh;
-
 			/* Change the relation to match the new query and other options. */
-			(void) create_ctas_nodata(query->targetList, into);
+			address = create_ctas_nodata(query->targetList, into);
 
-			/* Refresh the materialized view with a fake statement. */
-			refresh = makeNode(RefreshMatViewStmt);
-			refresh->relation = into->rel;
-			refresh->skipData = into->skipData;
-			refresh->concurrent = false;
+			/*
+			 * Refresh the materialized view with a fake statement unless we
+			 * must keep the old data.
+			 */
+			if (!into->keepData)
+			{
+				RefreshMatViewStmt *refresh;
+
+				refresh = makeNode(RefreshMatViewStmt);
+				refresh->relation = into->rel;
+				refresh->skipData = into->skipData;
+				refresh->concurrent = false;
+
+				address = ExecRefreshMatView(refresh, NULL, NULL);
+			}
 
-			return ExecRefreshMatView(refresh, NULL, NULL);
+			return address;
 		}
 
 		return InvalidObjectAddress;
diff --git a/src/backend/parser/gram.y b/src/backend/parser/gram.y
index 4b939ea7ca..e45ebb24f8 100644
--- a/src/backend/parser/gram.y
+++ b/src/backend/parser/gram.y
@@ -4808,6 +4808,22 @@ CreateMatViewStmt:
 					$7->replace = true;
 					$$ = (Node *) ctas;
 				}
+		| CREATE OR REPLACE OptNoLog MATERIALIZED VIEW create_mv_target AS SelectStmt WITH OLD DATA_P
+				{
+					CreateTableAsStmt *ctas = makeNode(CreateTableAsStmt);
+
+					ctas->query = $9;
+					ctas->into = $7;
+					ctas->objtype = OBJECT_MATVIEW;
+					ctas->is_select_into = false;
+					ctas->if_not_exists = false;
+					/* cram additional flags into the IntoClause */
+					$7->rel->relpersistence = $4;
+					$7->skipData = false;
+					$7->keepData = true;
+					$7->replace = true;
+					$$ = (Node *) ctas;
+				}
 		;
 
 create_mv_target:
diff --git a/src/include/nodes/primnodes.h b/src/include/nodes/primnodes.h
index 4b0ee5d10d..ae84cb522e 100644
--- a/src/include/nodes/primnodes.h
+++ b/src/include/nodes/primnodes.h
@@ -168,6 +168,7 @@ typedef struct IntoClause
 	/* materialized view's SELECT query */
 	Node	   *viewQuery pg_node_attr(query_jumble_ignore);
 	bool		skipData;		/* true for WITH NO DATA */
+	bool		keepData;		/* true for WITH OLD DATA */
 	bool		replace;		/* replace existing matview? */
 } IntoClause;
 
diff --git a/src/test/regress/expected/matview.out b/src/test/regress/expected/matview.out
index cefd0d442c..47dfd88bff 100644
--- a/src/test/regress/expected/matview.out
+++ b/src/test/regress/expected/matview.out
@@ -751,6 +751,23 @@ SELECT * FROM mvtest_replace;
  3
 (1 row)
 
+-- replace query but keep old data
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 5 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+ a 
+---
+ 3
+(1 row)
+
+REFRESH MATERIALIZED VIEW mvtest_replace;
+SELECT * FROM mvtest_replace;
+ a 
+---
+ 5
+(1 row)
+
 -- add column
 CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
   SELECT 4 AS a, 1 b;
@@ -905,3 +922,14 @@ ERROR:  syntax error at or near "NOT"
 LINE 1: CREATE OR REPLACE MATERIALIZED VIEW IF NOT EXISTS mvtest_rep...
                                                ^
 DROP MATERIALIZED VIEW mvtest_replace;
+-- Create new matview WITH OLD DATA.  This populates the new matview as if
+-- WITH DATA had been specified.
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 17 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+ a  
+----
+ 17
+(1 row)
+
diff --git a/src/test/regress/sql/matview.sql b/src/test/regress/sql/matview.sql
index c12f0243c9..b268237c24 100644
--- a/src/test/regress/sql/matview.sql
+++ b/src/test/regress/sql/matview.sql
@@ -338,6 +338,14 @@ SELECT * FROM mvtest_replace; -- error: not populated
 REFRESH MATERIALIZED VIEW mvtest_replace;
 SELECT * FROM mvtest_replace;
 
+-- replace query but keep old data
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 5 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+REFRESH MATERIALIZED VIEW mvtest_replace;
+SELECT * FROM mvtest_replace;
+
 -- add column
 CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
   SELECT 4 AS a, 1 b;
@@ -422,3 +430,10 @@ CREATE OR REPLACE MATERIALIZED VIEW IF NOT EXISTS mvtest_replace AS
   SELECT 1 AS a;
 
 DROP MATERIALIZED VIEW mvtest_replace;
+
+-- Create new matview WITH OLD DATA.  This populates the new matview as if
+-- WITH DATA had been specified.
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 17 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
-- 
2.46.0


--muysnh7l3kienazz--





^ permalink  raw  reply  [nested|flat] 809+ messages in thread

* [PATCH v4 3/3] Replace matview WITH OLD DATA
@ 2024-07-26 21:33  Erik Wienhold <ewie@ewie.name>
  0 siblings, 0 replies; 809+ messages in thread

From: Erik Wienhold @ 2024-07-26 21:33 UTC (permalink / raw)

---
 .../sgml/ref/create_materialized_view.sgml    | 16 +++++++++--
 src/backend/commands/createas.c               | 26 +++++++++++------
 src/backend/parser/gram.y                     | 16 +++++++++++
 src/include/nodes/primnodes.h                 |  1 +
 src/test/regress/expected/matview.out         | 28 +++++++++++++++++++
 src/test/regress/sql/matview.sql              | 15 ++++++++++
 6 files changed, 90 insertions(+), 12 deletions(-)

diff --git a/doc/src/sgml/ref/create_materialized_view.sgml b/doc/src/sgml/ref/create_materialized_view.sgml
index 5e03320eb7..1352e9de40 100644
--- a/doc/src/sgml/ref/create_materialized_view.sgml
+++ b/doc/src/sgml/ref/create_materialized_view.sgml
@@ -27,7 +27,7 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
     [ WITH ( <replaceable class="parameter">storage_parameter</replaceable> [= <replaceable class="parameter">value</replaceable>] [, ... ] ) ]
     [ TABLESPACE <replaceable class="parameter">tablespace_name</replaceable> ]
     AS <replaceable>query</replaceable>
-    [ WITH [ NO ] DATA ]
+    [ WITH [ NO | OLD ] DATA ]
 </synopsis>
  </refsynopsisdiv>
 
@@ -37,7 +37,8 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
   <para>
    <command>CREATE MATERIALIZED VIEW</command> defines a materialized view of
    a query.  The query is executed and used to populate the view at the time
-   the command is issued (unless <command>WITH NO DATA</command> is used) and may be
+   the command is issued (unless <command>WITH NO DATA</command> or
+   <command>WITH OLD DATA</command> is used) and may be
    refreshed later using <command>REFRESH MATERIALIZED VIEW</command>.
   </para>
 
@@ -162,7 +163,7 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
    </varlistentry>
 
    <varlistentry>
-    <term><literal>WITH [ NO ] DATA</literal></term>
+    <term><literal>WITH [ NO | OLD ] DATA</literal></term>
     <listitem>
      <para>
       This clause specifies whether or not the materialized view should be
@@ -170,6 +171,15 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
       flagged as unscannable and cannot be queried until <command>REFRESH
       MATERIALIZED VIEW</command> is used.
      </para>
+
+     <para>
+      The form <command>WITH OLD DATA</command> keeps the already stored data
+      when replacing an existing materialized view to keep it populated.  For
+      newly created materialized views, this has the same effect as
+      <command>WITH DATA</command>.  Use this form if you want to use
+      <command>REFRESH MATERIALIZED VIEW CONCURRENTLY</command> as it requires
+      a populated materialized view.
+     </para>
     </listitem>
    </varlistentry>
 
diff --git a/src/backend/commands/createas.c b/src/backend/commands/createas.c
index d4bc5e5c08..8db000554c 100644
--- a/src/backend/commands/createas.c
+++ b/src/backend/commands/createas.c
@@ -332,18 +332,26 @@ ExecCreateTableAs(ParseState *pstate, CreateTableAsStmt *stmt,
 		/* An existing materialized view can be replaced. */
 		if (is_matview && into->replace)
 		{
-			RefreshMatViewStmt *refresh;
-
 			/* Change the relation to match the new query and other options. */
-			(void) create_ctas_nodata(query->targetList, into);
+			address = create_ctas_nodata(query->targetList, into);
 
-			/* Refresh the materialized view with a fake statement. */
-			refresh = makeNode(RefreshMatViewStmt);
-			refresh->relation = into->rel;
-			refresh->skipData = into->skipData;
-			refresh->concurrent = false;
+			/*
+			 * Refresh the materialized view with a fake statement unless we
+			 * must keep the old data.
+			 */
+			if (!into->keepData)
+			{
+				RefreshMatViewStmt *refresh;
+
+				refresh = makeNode(RefreshMatViewStmt);
+				refresh->relation = into->rel;
+				refresh->skipData = into->skipData;
+				refresh->concurrent = false;
+
+				address = ExecRefreshMatView(refresh, NULL, NULL);
+			}
 
-			return ExecRefreshMatView(refresh, NULL, NULL);
+			return address;
 		}
 
 		return InvalidObjectAddress;
diff --git a/src/backend/parser/gram.y b/src/backend/parser/gram.y
index dadc6b630a..1be1a95cd9 100644
--- a/src/backend/parser/gram.y
+++ b/src/backend/parser/gram.y
@@ -4838,6 +4838,22 @@ CreateMatViewStmt:
 					$7->replace = true;
 					$$ = (Node *) ctas;
 				}
+		| CREATE OR REPLACE OptNoLog MATERIALIZED VIEW create_mv_target AS SelectStmt WITH OLD DATA_P
+				{
+					CreateTableAsStmt *ctas = makeNode(CreateTableAsStmt);
+
+					ctas->query = $9;
+					ctas->into = $7;
+					ctas->objtype = OBJECT_MATVIEW;
+					ctas->is_select_into = false;
+					ctas->if_not_exists = false;
+					/* cram additional flags into the IntoClause */
+					$7->rel->relpersistence = $4;
+					$7->skipData = false;
+					$7->keepData = true;
+					$7->replace = true;
+					$$ = (Node *) ctas;
+				}
 		;
 
 create_mv_target:
diff --git a/src/include/nodes/primnodes.h b/src/include/nodes/primnodes.h
index 533fa847ab..6fa3291c64 100644
--- a/src/include/nodes/primnodes.h
+++ b/src/include/nodes/primnodes.h
@@ -168,6 +168,7 @@ typedef struct IntoClause
 	/* materialized view's SELECT query */
 	struct Query *viewQuery pg_node_attr(query_jumble_ignore);
 	bool		skipData;		/* true for WITH NO DATA */
+	bool		keepData;		/* true for WITH OLD DATA */
 	bool		replace;		/* replace existing matview? */
 } IntoClause;
 
diff --git a/src/test/regress/expected/matview.out b/src/test/regress/expected/matview.out
index cefd0d442c..47dfd88bff 100644
--- a/src/test/regress/expected/matview.out
+++ b/src/test/regress/expected/matview.out
@@ -751,6 +751,23 @@ SELECT * FROM mvtest_replace;
  3
 (1 row)
 
+-- replace query but keep old data
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 5 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+ a 
+---
+ 3
+(1 row)
+
+REFRESH MATERIALIZED VIEW mvtest_replace;
+SELECT * FROM mvtest_replace;
+ a 
+---
+ 5
+(1 row)
+
 -- add column
 CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
   SELECT 4 AS a, 1 b;
@@ -905,3 +922,14 @@ ERROR:  syntax error at or near "NOT"
 LINE 1: CREATE OR REPLACE MATERIALIZED VIEW IF NOT EXISTS mvtest_rep...
                                                ^
 DROP MATERIALIZED VIEW mvtest_replace;
+-- Create new matview WITH OLD DATA.  This populates the new matview as if
+-- WITH DATA had been specified.
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 17 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+ a  
+----
+ 17
+(1 row)
+
diff --git a/src/test/regress/sql/matview.sql b/src/test/regress/sql/matview.sql
index c12f0243c9..b268237c24 100644
--- a/src/test/regress/sql/matview.sql
+++ b/src/test/regress/sql/matview.sql
@@ -338,6 +338,14 @@ SELECT * FROM mvtest_replace; -- error: not populated
 REFRESH MATERIALIZED VIEW mvtest_replace;
 SELECT * FROM mvtest_replace;
 
+-- replace query but keep old data
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 5 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+REFRESH MATERIALIZED VIEW mvtest_replace;
+SELECT * FROM mvtest_replace;
+
 -- add column
 CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
   SELECT 4 AS a, 1 b;
@@ -422,3 +430,10 @@ CREATE OR REPLACE MATERIALIZED VIEW IF NOT EXISTS mvtest_replace AS
   SELECT 1 AS a;
 
 DROP MATERIALIZED VIEW mvtest_replace;
+
+-- Create new matview WITH OLD DATA.  This populates the new matview as if
+-- WITH DATA had been specified.
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 17 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
-- 
2.47.0


--hht4bymbvbva5al5--





^ permalink  raw  reply  [nested|flat] 809+ messages in thread

* [PATCH v6 3/3] Replace matview WITH OLD DATA
@ 2024-07-26 21:33  Erik Wienhold <ewie@ewie.name>
  0 siblings, 0 replies; 809+ messages in thread

From: Erik Wienhold @ 2024-07-26 21:33 UTC (permalink / raw)

---
 .../sgml/ref/create_materialized_view.sgml    | 16 +++++++++--
 src/backend/commands/createas.c               | 26 +++++++++++------
 src/backend/parser/gram.y                     | 16 +++++++++++
 src/include/nodes/primnodes.h                 |  1 +
 src/test/regress/expected/matview.out         | 28 +++++++++++++++++++
 src/test/regress/sql/matview.sql              | 15 ++++++++++
 6 files changed, 90 insertions(+), 12 deletions(-)

diff --git a/doc/src/sgml/ref/create_materialized_view.sgml b/doc/src/sgml/ref/create_materialized_view.sgml
index 5e03320eb73..1352e9de409 100644
--- a/doc/src/sgml/ref/create_materialized_view.sgml
+++ b/doc/src/sgml/ref/create_materialized_view.sgml
@@ -27,7 +27,7 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
     [ WITH ( <replaceable class="parameter">storage_parameter</replaceable> [= <replaceable class="parameter">value</replaceable>] [, ... ] ) ]
     [ TABLESPACE <replaceable class="parameter">tablespace_name</replaceable> ]
     AS <replaceable>query</replaceable>
-    [ WITH [ NO ] DATA ]
+    [ WITH [ NO | OLD ] DATA ]
 </synopsis>
  </refsynopsisdiv>
 
@@ -37,7 +37,8 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
   <para>
    <command>CREATE MATERIALIZED VIEW</command> defines a materialized view of
    a query.  The query is executed and used to populate the view at the time
-   the command is issued (unless <command>WITH NO DATA</command> is used) and may be
+   the command is issued (unless <command>WITH NO DATA</command> or
+   <command>WITH OLD DATA</command> is used) and may be
    refreshed later using <command>REFRESH MATERIALIZED VIEW</command>.
   </para>
 
@@ -162,7 +163,7 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
    </varlistentry>
 
    <varlistentry>
-    <term><literal>WITH [ NO ] DATA</literal></term>
+    <term><literal>WITH [ NO | OLD ] DATA</literal></term>
     <listitem>
      <para>
       This clause specifies whether or not the materialized view should be
@@ -170,6 +171,15 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
       flagged as unscannable and cannot be queried until <command>REFRESH
       MATERIALIZED VIEW</command> is used.
      </para>
+
+     <para>
+      The form <command>WITH OLD DATA</command> keeps the already stored data
+      when replacing an existing materialized view to keep it populated.  For
+      newly created materialized views, this has the same effect as
+      <command>WITH DATA</command>.  Use this form if you want to use
+      <command>REFRESH MATERIALIZED VIEW CONCURRENTLY</command> as it requires
+      a populated materialized view.
+     </para>
     </listitem>
    </varlistentry>
 
diff --git a/src/backend/commands/createas.c b/src/backend/commands/createas.c
index 9f37ed7f177..0ed44b246bd 100644
--- a/src/backend/commands/createas.c
+++ b/src/backend/commands/createas.c
@@ -332,18 +332,26 @@ ExecCreateTableAs(ParseState *pstate, CreateTableAsStmt *stmt,
 		/* An existing materialized view can be replaced. */
 		if (is_matview && into->replace)
 		{
-			RefreshMatViewStmt *refresh;
-
 			/* Change the relation to match the new query and other options. */
-			(void) create_ctas_nodata(query->targetList, into);
+			address = create_ctas_nodata(query->targetList, into);
 
-			/* Refresh the materialized view with a fake statement. */
-			refresh = makeNode(RefreshMatViewStmt);
-			refresh->relation = into->rel;
-			refresh->skipData = into->skipData;
-			refresh->concurrent = false;
+			/*
+			 * Refresh the materialized view with a fake statement unless we
+			 * must keep the old data.
+			 */
+			if (!into->keepData)
+			{
+				RefreshMatViewStmt *refresh;
+
+				refresh = makeNode(RefreshMatViewStmt);
+				refresh->relation = into->rel;
+				refresh->skipData = into->skipData;
+				refresh->concurrent = false;
+
+				address = ExecRefreshMatView(refresh, pstate->p_sourcetext, qc);
+			}
 
-			return ExecRefreshMatView(refresh, pstate->p_sourcetext, qc);
+			return address;
 		}
 
 		return InvalidObjectAddress;
diff --git a/src/backend/parser/gram.y b/src/backend/parser/gram.y
index 8be790eaccf..e405268f413 100644
--- a/src/backend/parser/gram.y
+++ b/src/backend/parser/gram.y
@@ -4924,6 +4924,22 @@ CreateMatViewStmt:
 					$7->replace = true;
 					$$ = (Node *) ctas;
 				}
+		| CREATE OR REPLACE OptNoLog MATERIALIZED VIEW create_mv_target AS SelectStmt WITH OLD DATA_P
+				{
+					CreateTableAsStmt *ctas = makeNode(CreateTableAsStmt);
+
+					ctas->query = $9;
+					ctas->into = $7;
+					ctas->objtype = OBJECT_MATVIEW;
+					ctas->is_select_into = false;
+					ctas->if_not_exists = false;
+					/* cram additional flags into the IntoClause */
+					$7->rel->relpersistence = $4;
+					$7->skipData = false;
+					$7->keepData = true;
+					$7->replace = true;
+					$$ = (Node *) ctas;
+				}
 		;
 
 create_mv_target:
diff --git a/src/include/nodes/primnodes.h b/src/include/nodes/primnodes.h
index e800d13a6e0..5290e6c0e8a 100644
--- a/src/include/nodes/primnodes.h
+++ b/src/include/nodes/primnodes.h
@@ -169,6 +169,7 @@ typedef struct IntoClause
 	/* materialized view's SELECT query */
 	struct Query *viewQuery pg_node_attr(query_jumble_ignore);
 	bool		skipData;		/* true for WITH NO DATA */
+	bool		keepData;		/* true for WITH OLD DATA */
 	bool		replace;		/* replace existing matview? */
 } IntoClause;
 
diff --git a/src/test/regress/expected/matview.out b/src/test/regress/expected/matview.out
index d4b42da1ddf..f0f52dd1c6c 100644
--- a/src/test/regress/expected/matview.out
+++ b/src/test/regress/expected/matview.out
@@ -751,6 +751,23 @@ SELECT * FROM mvtest_replace;
  3
 (1 row)
 
+-- replace query but keep old data
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 5 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+ a 
+---
+ 3
+(1 row)
+
+REFRESH MATERIALIZED VIEW mvtest_replace;
+SELECT * FROM mvtest_replace;
+ a 
+---
+ 5
+(1 row)
+
 -- add column
 CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
   SELECT 4 AS a, 1 b;
@@ -905,3 +922,14 @@ ERROR:  syntax error at or near "NOT"
 LINE 1: CREATE OR REPLACE MATERIALIZED VIEW IF NOT EXISTS mvtest_rep...
                                                ^
 DROP MATERIALIZED VIEW mvtest_replace;
+-- Create new matview WITH OLD DATA.  This populates the new matview as if
+-- WITH DATA had been specified.
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 17 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+ a  
+----
+ 17
+(1 row)
+
diff --git a/src/test/regress/sql/matview.sql b/src/test/regress/sql/matview.sql
index d6a4dc4b857..91f547e9cb8 100644
--- a/src/test/regress/sql/matview.sql
+++ b/src/test/regress/sql/matview.sql
@@ -338,6 +338,14 @@ SELECT * FROM mvtest_replace; -- error: not populated
 REFRESH MATERIALIZED VIEW mvtest_replace;
 SELECT * FROM mvtest_replace;
 
+-- replace query but keep old data
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 5 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+REFRESH MATERIALIZED VIEW mvtest_replace;
+SELECT * FROM mvtest_replace;
+
 -- add column
 CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
   SELECT 4 AS a, 1 b;
@@ -422,3 +430,10 @@ CREATE OR REPLACE MATERIALIZED VIEW IF NOT EXISTS mvtest_replace AS
   SELECT 1 AS a;
 
 DROP MATERIALIZED VIEW mvtest_replace;
+
+-- Create new matview WITH OLD DATA.  This populates the new matview as if
+-- WITH DATA had been specified.
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 17 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
-- 
2.48.1


--aewcrbystcgftlni--





^ permalink  raw  reply  [nested|flat] 809+ messages in thread

* [PATCH v2 3/3] Replace matview WITH OLD DATA
@ 2024-07-26 21:33  Erik Wienhold <ewie@ewie.name>
  0 siblings, 0 replies; 809+ messages in thread

From: Erik Wienhold @ 2024-07-26 21:33 UTC (permalink / raw)

---
 .../sgml/ref/create_materialized_view.sgml    | 16 +++++++++--
 src/backend/commands/createas.c               | 26 +++++++++++------
 src/backend/parser/gram.y                     | 16 +++++++++++
 src/include/nodes/primnodes.h                 |  1 +
 src/test/regress/expected/matview.out         | 28 +++++++++++++++++++
 src/test/regress/sql/matview.sql              | 15 ++++++++++
 6 files changed, 90 insertions(+), 12 deletions(-)

diff --git a/doc/src/sgml/ref/create_materialized_view.sgml b/doc/src/sgml/ref/create_materialized_view.sgml
index b5a8e3441a..65633b8bfa 100644
--- a/doc/src/sgml/ref/create_materialized_view.sgml
+++ b/doc/src/sgml/ref/create_materialized_view.sgml
@@ -27,7 +27,7 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
     [ WITH ( <replaceable class="parameter">storage_parameter</replaceable> [= <replaceable class="parameter">value</replaceable>] [, ... ] ) ]
     [ TABLESPACE <replaceable class="parameter">tablespace_name</replaceable> ]
     AS <replaceable>query</replaceable>
-    [ WITH [ NO ] DATA ]
+    [ WITH [ NO | OLD ] DATA ]
 </synopsis>
  </refsynopsisdiv>
 
@@ -37,7 +37,8 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
   <para>
    <command>CREATE MATERIALIZED VIEW</command> defines a materialized view of
    a query.  The query is executed and used to populate the view at the time
-   the command is issued (unless <command>WITH NO DATA</command> is used) and may be
+   the command is issued (unless <command>WITH NO DATA</command> or
+   <command>WITH OLD DATA</command> is used) and may be
    refreshed later using <command>REFRESH MATERIALIZED VIEW</command>.
   </para>
 
@@ -160,7 +161,7 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
    </varlistentry>
 
    <varlistentry>
-    <term><literal>WITH [ NO ] DATA</literal></term>
+    <term><literal>WITH [ NO | OLD ] DATA</literal></term>
     <listitem>
      <para>
       This clause specifies whether or not the materialized view should be
@@ -168,6 +169,15 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
       flagged as unscannable and cannot be queried until <command>REFRESH
       MATERIALIZED VIEW</command> is used.
      </para>
+
+     <para>
+      The form <command>WITH OLD DATA</command> keeps the already stored data
+      when replacing an existing materialized view to keep it populated.  For
+      newly created materialized views, this has the same effect as
+      <command>WITH DATA</command>.  Use this form if you want to use
+      <command>REFRESH MATERIALIZED VIEW CONCURRENTLY</command> as it requires
+      a populated materialized view.
+     </para>
     </listitem>
    </varlistentry>
 
diff --git a/src/backend/commands/createas.c b/src/backend/commands/createas.c
index c5d78252a1..e2948ac966 100644
--- a/src/backend/commands/createas.c
+++ b/src/backend/commands/createas.c
@@ -334,18 +334,26 @@ ExecCreateTableAs(ParseState *pstate, CreateTableAsStmt *stmt,
 		/* An existing materialized view can be replaced. */
 		if (is_matview && into->replace)
 		{
-			RefreshMatViewStmt *refresh;
-
 			/* Change the relation to match the new query and other options. */
-			(void) create_ctas_nodata(query->targetList, into);
+			address = create_ctas_nodata(query->targetList, into);
 
-			/* Refresh the materialized view with a fake statement. */
-			refresh = makeNode(RefreshMatViewStmt);
-			refresh->relation = into->rel;
-			refresh->skipData = into->skipData;
-			refresh->concurrent = false;
+			/*
+			 * Refresh the materialized view with a fake statement unless we
+			 * must keep the old data.
+			 */
+			if (!into->keepData)
+			{
+				RefreshMatViewStmt *refresh;
+
+				refresh = makeNode(RefreshMatViewStmt);
+				refresh->relation = into->rel;
+				refresh->skipData = into->skipData;
+				refresh->concurrent = false;
+
+				address = ExecRefreshMatView(refresh, NULL, NULL, NULL);
+			}
 
-			return ExecRefreshMatView(refresh, NULL, NULL, NULL);
+			return address;
 		}
 
 		return InvalidObjectAddress;
diff --git a/src/backend/parser/gram.y b/src/backend/parser/gram.y
index b1100bdec1..0647955005 100644
--- a/src/backend/parser/gram.y
+++ b/src/backend/parser/gram.y
@@ -4860,6 +4860,22 @@ CreateMatViewStmt:
 					$7->replace = true;
 					$$ = (Node *) ctas;
 				}
+		| CREATE OR REPLACE OptNoLog MATERIALIZED VIEW create_mv_target AS SelectStmt WITH OLD DATA_P
+				{
+					CreateTableAsStmt *ctas = makeNode(CreateTableAsStmt);
+
+					ctas->query = $9;
+					ctas->into = $7;
+					ctas->objtype = OBJECT_MATVIEW;
+					ctas->is_select_into = false;
+					ctas->if_not_exists = false;
+					/* cram additional flags into the IntoClause */
+					$7->rel->relpersistence = $4;
+					$7->skipData = false;
+					$7->keepData = true;
+					$7->replace = true;
+					$$ = (Node *) ctas;
+				}
 		;
 
 create_mv_target:
diff --git a/src/include/nodes/primnodes.h b/src/include/nodes/primnodes.h
index 4b0ee5d10d..ae84cb522e 100644
--- a/src/include/nodes/primnodes.h
+++ b/src/include/nodes/primnodes.h
@@ -168,6 +168,7 @@ typedef struct IntoClause
 	/* materialized view's SELECT query */
 	Node	   *viewQuery pg_node_attr(query_jumble_ignore);
 	bool		skipData;		/* true for WITH NO DATA */
+	bool		keepData;		/* true for WITH OLD DATA */
 	bool		replace;		/* replace existing matview? */
 } IntoClause;
 
diff --git a/src/test/regress/expected/matview.out b/src/test/regress/expected/matview.out
index cefd0d442c..47dfd88bff 100644
--- a/src/test/regress/expected/matview.out
+++ b/src/test/regress/expected/matview.out
@@ -751,6 +751,23 @@ SELECT * FROM mvtest_replace;
  3
 (1 row)
 
+-- replace query but keep old data
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 5 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+ a 
+---
+ 3
+(1 row)
+
+REFRESH MATERIALIZED VIEW mvtest_replace;
+SELECT * FROM mvtest_replace;
+ a 
+---
+ 5
+(1 row)
+
 -- add column
 CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
   SELECT 4 AS a, 1 b;
@@ -905,3 +922,14 @@ ERROR:  syntax error at or near "NOT"
 LINE 1: CREATE OR REPLACE MATERIALIZED VIEW IF NOT EXISTS mvtest_rep...
                                                ^
 DROP MATERIALIZED VIEW mvtest_replace;
+-- Create new matview WITH OLD DATA.  This populates the new matview as if
+-- WITH DATA had been specified.
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 17 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+ a  
+----
+ 17
+(1 row)
+
diff --git a/src/test/regress/sql/matview.sql b/src/test/regress/sql/matview.sql
index c12f0243c9..b268237c24 100644
--- a/src/test/regress/sql/matview.sql
+++ b/src/test/regress/sql/matview.sql
@@ -338,6 +338,14 @@ SELECT * FROM mvtest_replace; -- error: not populated
 REFRESH MATERIALIZED VIEW mvtest_replace;
 SELECT * FROM mvtest_replace;
 
+-- replace query but keep old data
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 5 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+REFRESH MATERIALIZED VIEW mvtest_replace;
+SELECT * FROM mvtest_replace;
+
 -- add column
 CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
   SELECT 4 AS a, 1 b;
@@ -422,3 +430,10 @@ CREATE OR REPLACE MATERIALIZED VIEW IF NOT EXISTS mvtest_replace AS
   SELECT 1 AS a;
 
 DROP MATERIALIZED VIEW mvtest_replace;
+
+-- Create new matview WITH OLD DATA.  This populates the new matview as if
+-- WITH DATA had been specified.
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 17 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
-- 
2.45.2


--nrp556lrhtfteavd--





^ permalink  raw  reply  [nested|flat] 809+ messages in thread

* [PATCH v3 3/3] Replace matview WITH OLD DATA
@ 2024-07-26 21:33  Erik Wienhold <ewie@ewie.name>
  0 siblings, 0 replies; 809+ messages in thread

From: Erik Wienhold @ 2024-07-26 21:33 UTC (permalink / raw)

---
 .../sgml/ref/create_materialized_view.sgml    | 16 +++++++++--
 src/backend/commands/createas.c               | 26 +++++++++++------
 src/backend/parser/gram.y                     | 16 +++++++++++
 src/include/nodes/primnodes.h                 |  1 +
 src/test/regress/expected/matview.out         | 28 +++++++++++++++++++
 src/test/regress/sql/matview.sql              | 15 ++++++++++
 6 files changed, 90 insertions(+), 12 deletions(-)

diff --git a/doc/src/sgml/ref/create_materialized_view.sgml b/doc/src/sgml/ref/create_materialized_view.sgml
index b5a8e3441a..65633b8bfa 100644
--- a/doc/src/sgml/ref/create_materialized_view.sgml
+++ b/doc/src/sgml/ref/create_materialized_view.sgml
@@ -27,7 +27,7 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
     [ WITH ( <replaceable class="parameter">storage_parameter</replaceable> [= <replaceable class="parameter">value</replaceable>] [, ... ] ) ]
     [ TABLESPACE <replaceable class="parameter">tablespace_name</replaceable> ]
     AS <replaceable>query</replaceable>
-    [ WITH [ NO ] DATA ]
+    [ WITH [ NO | OLD ] DATA ]
 </synopsis>
  </refsynopsisdiv>
 
@@ -37,7 +37,8 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
   <para>
    <command>CREATE MATERIALIZED VIEW</command> defines a materialized view of
    a query.  The query is executed and used to populate the view at the time
-   the command is issued (unless <command>WITH NO DATA</command> is used) and may be
+   the command is issued (unless <command>WITH NO DATA</command> or
+   <command>WITH OLD DATA</command> is used) and may be
    refreshed later using <command>REFRESH MATERIALIZED VIEW</command>.
   </para>
 
@@ -160,7 +161,7 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
    </varlistentry>
 
    <varlistentry>
-    <term><literal>WITH [ NO ] DATA</literal></term>
+    <term><literal>WITH [ NO | OLD ] DATA</literal></term>
     <listitem>
      <para>
       This clause specifies whether or not the materialized view should be
@@ -168,6 +169,15 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
       flagged as unscannable and cannot be queried until <command>REFRESH
       MATERIALIZED VIEW</command> is used.
      </para>
+
+     <para>
+      The form <command>WITH OLD DATA</command> keeps the already stored data
+      when replacing an existing materialized view to keep it populated.  For
+      newly created materialized views, this has the same effect as
+      <command>WITH DATA</command>.  Use this form if you want to use
+      <command>REFRESH MATERIALIZED VIEW CONCURRENTLY</command> as it requires
+      a populated materialized view.
+     </para>
     </listitem>
    </varlistentry>
 
diff --git a/src/backend/commands/createas.c b/src/backend/commands/createas.c
index e4ed3748f9..96e7b81966 100644
--- a/src/backend/commands/createas.c
+++ b/src/backend/commands/createas.c
@@ -331,18 +331,26 @@ ExecCreateTableAs(ParseState *pstate, CreateTableAsStmt *stmt,
 		/* An existing materialized view can be replaced. */
 		if (is_matview && into->replace)
 		{
-			RefreshMatViewStmt *refresh;
-
 			/* Change the relation to match the new query and other options. */
-			(void) create_ctas_nodata(query->targetList, into);
+			address = create_ctas_nodata(query->targetList, into);
 
-			/* Refresh the materialized view with a fake statement. */
-			refresh = makeNode(RefreshMatViewStmt);
-			refresh->relation = into->rel;
-			refresh->skipData = into->skipData;
-			refresh->concurrent = false;
+			/*
+			 * Refresh the materialized view with a fake statement unless we
+			 * must keep the old data.
+			 */
+			if (!into->keepData)
+			{
+				RefreshMatViewStmt *refresh;
+
+				refresh = makeNode(RefreshMatViewStmt);
+				refresh->relation = into->rel;
+				refresh->skipData = into->skipData;
+				refresh->concurrent = false;
+
+				address = ExecRefreshMatView(refresh, NULL, NULL);
+			}
 
-			return ExecRefreshMatView(refresh, NULL, NULL);
+			return address;
 		}
 
 		return InvalidObjectAddress;
diff --git a/src/backend/parser/gram.y b/src/backend/parser/gram.y
index 4b939ea7ca..e45ebb24f8 100644
--- a/src/backend/parser/gram.y
+++ b/src/backend/parser/gram.y
@@ -4808,6 +4808,22 @@ CreateMatViewStmt:
 					$7->replace = true;
 					$$ = (Node *) ctas;
 				}
+		| CREATE OR REPLACE OptNoLog MATERIALIZED VIEW create_mv_target AS SelectStmt WITH OLD DATA_P
+				{
+					CreateTableAsStmt *ctas = makeNode(CreateTableAsStmt);
+
+					ctas->query = $9;
+					ctas->into = $7;
+					ctas->objtype = OBJECT_MATVIEW;
+					ctas->is_select_into = false;
+					ctas->if_not_exists = false;
+					/* cram additional flags into the IntoClause */
+					$7->rel->relpersistence = $4;
+					$7->skipData = false;
+					$7->keepData = true;
+					$7->replace = true;
+					$$ = (Node *) ctas;
+				}
 		;
 
 create_mv_target:
diff --git a/src/include/nodes/primnodes.h b/src/include/nodes/primnodes.h
index 4b0ee5d10d..ae84cb522e 100644
--- a/src/include/nodes/primnodes.h
+++ b/src/include/nodes/primnodes.h
@@ -168,6 +168,7 @@ typedef struct IntoClause
 	/* materialized view's SELECT query */
 	Node	   *viewQuery pg_node_attr(query_jumble_ignore);
 	bool		skipData;		/* true for WITH NO DATA */
+	bool		keepData;		/* true for WITH OLD DATA */
 	bool		replace;		/* replace existing matview? */
 } IntoClause;
 
diff --git a/src/test/regress/expected/matview.out b/src/test/regress/expected/matview.out
index cefd0d442c..47dfd88bff 100644
--- a/src/test/regress/expected/matview.out
+++ b/src/test/regress/expected/matview.out
@@ -751,6 +751,23 @@ SELECT * FROM mvtest_replace;
  3
 (1 row)
 
+-- replace query but keep old data
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 5 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+ a 
+---
+ 3
+(1 row)
+
+REFRESH MATERIALIZED VIEW mvtest_replace;
+SELECT * FROM mvtest_replace;
+ a 
+---
+ 5
+(1 row)
+
 -- add column
 CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
   SELECT 4 AS a, 1 b;
@@ -905,3 +922,14 @@ ERROR:  syntax error at or near "NOT"
 LINE 1: CREATE OR REPLACE MATERIALIZED VIEW IF NOT EXISTS mvtest_rep...
                                                ^
 DROP MATERIALIZED VIEW mvtest_replace;
+-- Create new matview WITH OLD DATA.  This populates the new matview as if
+-- WITH DATA had been specified.
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 17 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+ a  
+----
+ 17
+(1 row)
+
diff --git a/src/test/regress/sql/matview.sql b/src/test/regress/sql/matview.sql
index c12f0243c9..b268237c24 100644
--- a/src/test/regress/sql/matview.sql
+++ b/src/test/regress/sql/matview.sql
@@ -338,6 +338,14 @@ SELECT * FROM mvtest_replace; -- error: not populated
 REFRESH MATERIALIZED VIEW mvtest_replace;
 SELECT * FROM mvtest_replace;
 
+-- replace query but keep old data
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 5 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+REFRESH MATERIALIZED VIEW mvtest_replace;
+SELECT * FROM mvtest_replace;
+
 -- add column
 CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
   SELECT 4 AS a, 1 b;
@@ -422,3 +430,10 @@ CREATE OR REPLACE MATERIALIZED VIEW IF NOT EXISTS mvtest_replace AS
   SELECT 1 AS a;
 
 DROP MATERIALIZED VIEW mvtest_replace;
+
+-- Create new matview WITH OLD DATA.  This populates the new matview as if
+-- WITH DATA had been specified.
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 17 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
-- 
2.46.0


--muysnh7l3kienazz--





^ permalink  raw  reply  [nested|flat] 809+ messages in thread

* [PATCH v4 3/3] Replace matview WITH OLD DATA
@ 2024-07-26 21:33  Erik Wienhold <ewie@ewie.name>
  0 siblings, 0 replies; 809+ messages in thread

From: Erik Wienhold @ 2024-07-26 21:33 UTC (permalink / raw)

---
 .../sgml/ref/create_materialized_view.sgml    | 16 +++++++++--
 src/backend/commands/createas.c               | 26 +++++++++++------
 src/backend/parser/gram.y                     | 16 +++++++++++
 src/include/nodes/primnodes.h                 |  1 +
 src/test/regress/expected/matview.out         | 28 +++++++++++++++++++
 src/test/regress/sql/matview.sql              | 15 ++++++++++
 6 files changed, 90 insertions(+), 12 deletions(-)

diff --git a/doc/src/sgml/ref/create_materialized_view.sgml b/doc/src/sgml/ref/create_materialized_view.sgml
index 5e03320eb7..1352e9de40 100644
--- a/doc/src/sgml/ref/create_materialized_view.sgml
+++ b/doc/src/sgml/ref/create_materialized_view.sgml
@@ -27,7 +27,7 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
     [ WITH ( <replaceable class="parameter">storage_parameter</replaceable> [= <replaceable class="parameter">value</replaceable>] [, ... ] ) ]
     [ TABLESPACE <replaceable class="parameter">tablespace_name</replaceable> ]
     AS <replaceable>query</replaceable>
-    [ WITH [ NO ] DATA ]
+    [ WITH [ NO | OLD ] DATA ]
 </synopsis>
  </refsynopsisdiv>
 
@@ -37,7 +37,8 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
   <para>
    <command>CREATE MATERIALIZED VIEW</command> defines a materialized view of
    a query.  The query is executed and used to populate the view at the time
-   the command is issued (unless <command>WITH NO DATA</command> is used) and may be
+   the command is issued (unless <command>WITH NO DATA</command> or
+   <command>WITH OLD DATA</command> is used) and may be
    refreshed later using <command>REFRESH MATERIALIZED VIEW</command>.
   </para>
 
@@ -162,7 +163,7 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
    </varlistentry>
 
    <varlistentry>
-    <term><literal>WITH [ NO ] DATA</literal></term>
+    <term><literal>WITH [ NO | OLD ] DATA</literal></term>
     <listitem>
      <para>
       This clause specifies whether or not the materialized view should be
@@ -170,6 +171,15 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
       flagged as unscannable and cannot be queried until <command>REFRESH
       MATERIALIZED VIEW</command> is used.
      </para>
+
+     <para>
+      The form <command>WITH OLD DATA</command> keeps the already stored data
+      when replacing an existing materialized view to keep it populated.  For
+      newly created materialized views, this has the same effect as
+      <command>WITH DATA</command>.  Use this form if you want to use
+      <command>REFRESH MATERIALIZED VIEW CONCURRENTLY</command> as it requires
+      a populated materialized view.
+     </para>
     </listitem>
    </varlistentry>
 
diff --git a/src/backend/commands/createas.c b/src/backend/commands/createas.c
index d4bc5e5c08..8db000554c 100644
--- a/src/backend/commands/createas.c
+++ b/src/backend/commands/createas.c
@@ -332,18 +332,26 @@ ExecCreateTableAs(ParseState *pstate, CreateTableAsStmt *stmt,
 		/* An existing materialized view can be replaced. */
 		if (is_matview && into->replace)
 		{
-			RefreshMatViewStmt *refresh;
-
 			/* Change the relation to match the new query and other options. */
-			(void) create_ctas_nodata(query->targetList, into);
+			address = create_ctas_nodata(query->targetList, into);
 
-			/* Refresh the materialized view with a fake statement. */
-			refresh = makeNode(RefreshMatViewStmt);
-			refresh->relation = into->rel;
-			refresh->skipData = into->skipData;
-			refresh->concurrent = false;
+			/*
+			 * Refresh the materialized view with a fake statement unless we
+			 * must keep the old data.
+			 */
+			if (!into->keepData)
+			{
+				RefreshMatViewStmt *refresh;
+
+				refresh = makeNode(RefreshMatViewStmt);
+				refresh->relation = into->rel;
+				refresh->skipData = into->skipData;
+				refresh->concurrent = false;
+
+				address = ExecRefreshMatView(refresh, NULL, NULL);
+			}
 
-			return ExecRefreshMatView(refresh, NULL, NULL);
+			return address;
 		}
 
 		return InvalidObjectAddress;
diff --git a/src/backend/parser/gram.y b/src/backend/parser/gram.y
index dadc6b630a..1be1a95cd9 100644
--- a/src/backend/parser/gram.y
+++ b/src/backend/parser/gram.y
@@ -4838,6 +4838,22 @@ CreateMatViewStmt:
 					$7->replace = true;
 					$$ = (Node *) ctas;
 				}
+		| CREATE OR REPLACE OptNoLog MATERIALIZED VIEW create_mv_target AS SelectStmt WITH OLD DATA_P
+				{
+					CreateTableAsStmt *ctas = makeNode(CreateTableAsStmt);
+
+					ctas->query = $9;
+					ctas->into = $7;
+					ctas->objtype = OBJECT_MATVIEW;
+					ctas->is_select_into = false;
+					ctas->if_not_exists = false;
+					/* cram additional flags into the IntoClause */
+					$7->rel->relpersistence = $4;
+					$7->skipData = false;
+					$7->keepData = true;
+					$7->replace = true;
+					$$ = (Node *) ctas;
+				}
 		;
 
 create_mv_target:
diff --git a/src/include/nodes/primnodes.h b/src/include/nodes/primnodes.h
index 533fa847ab..6fa3291c64 100644
--- a/src/include/nodes/primnodes.h
+++ b/src/include/nodes/primnodes.h
@@ -168,6 +168,7 @@ typedef struct IntoClause
 	/* materialized view's SELECT query */
 	struct Query *viewQuery pg_node_attr(query_jumble_ignore);
 	bool		skipData;		/* true for WITH NO DATA */
+	bool		keepData;		/* true for WITH OLD DATA */
 	bool		replace;		/* replace existing matview? */
 } IntoClause;
 
diff --git a/src/test/regress/expected/matview.out b/src/test/regress/expected/matview.out
index cefd0d442c..47dfd88bff 100644
--- a/src/test/regress/expected/matview.out
+++ b/src/test/regress/expected/matview.out
@@ -751,6 +751,23 @@ SELECT * FROM mvtest_replace;
  3
 (1 row)
 
+-- replace query but keep old data
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 5 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+ a 
+---
+ 3
+(1 row)
+
+REFRESH MATERIALIZED VIEW mvtest_replace;
+SELECT * FROM mvtest_replace;
+ a 
+---
+ 5
+(1 row)
+
 -- add column
 CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
   SELECT 4 AS a, 1 b;
@@ -905,3 +922,14 @@ ERROR:  syntax error at or near "NOT"
 LINE 1: CREATE OR REPLACE MATERIALIZED VIEW IF NOT EXISTS mvtest_rep...
                                                ^
 DROP MATERIALIZED VIEW mvtest_replace;
+-- Create new matview WITH OLD DATA.  This populates the new matview as if
+-- WITH DATA had been specified.
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 17 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+ a  
+----
+ 17
+(1 row)
+
diff --git a/src/test/regress/sql/matview.sql b/src/test/regress/sql/matview.sql
index c12f0243c9..b268237c24 100644
--- a/src/test/regress/sql/matview.sql
+++ b/src/test/regress/sql/matview.sql
@@ -338,6 +338,14 @@ SELECT * FROM mvtest_replace; -- error: not populated
 REFRESH MATERIALIZED VIEW mvtest_replace;
 SELECT * FROM mvtest_replace;
 
+-- replace query but keep old data
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 5 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+REFRESH MATERIALIZED VIEW mvtest_replace;
+SELECT * FROM mvtest_replace;
+
 -- add column
 CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
   SELECT 4 AS a, 1 b;
@@ -422,3 +430,10 @@ CREATE OR REPLACE MATERIALIZED VIEW IF NOT EXISTS mvtest_replace AS
   SELECT 1 AS a;
 
 DROP MATERIALIZED VIEW mvtest_replace;
+
+-- Create new matview WITH OLD DATA.  This populates the new matview as if
+-- WITH DATA had been specified.
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 17 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
-- 
2.47.0


--hht4bymbvbva5al5--





^ permalink  raw  reply  [nested|flat] 809+ messages in thread

* [PATCH v6 3/3] Replace matview WITH OLD DATA
@ 2024-07-26 21:33  Erik Wienhold <ewie@ewie.name>
  0 siblings, 0 replies; 809+ messages in thread

From: Erik Wienhold @ 2024-07-26 21:33 UTC (permalink / raw)

---
 .../sgml/ref/create_materialized_view.sgml    | 16 +++++++++--
 src/backend/commands/createas.c               | 26 +++++++++++------
 src/backend/parser/gram.y                     | 16 +++++++++++
 src/include/nodes/primnodes.h                 |  1 +
 src/test/regress/expected/matview.out         | 28 +++++++++++++++++++
 src/test/regress/sql/matview.sql              | 15 ++++++++++
 6 files changed, 90 insertions(+), 12 deletions(-)

diff --git a/doc/src/sgml/ref/create_materialized_view.sgml b/doc/src/sgml/ref/create_materialized_view.sgml
index 5e03320eb73..1352e9de409 100644
--- a/doc/src/sgml/ref/create_materialized_view.sgml
+++ b/doc/src/sgml/ref/create_materialized_view.sgml
@@ -27,7 +27,7 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
     [ WITH ( <replaceable class="parameter">storage_parameter</replaceable> [= <replaceable class="parameter">value</replaceable>] [, ... ] ) ]
     [ TABLESPACE <replaceable class="parameter">tablespace_name</replaceable> ]
     AS <replaceable>query</replaceable>
-    [ WITH [ NO ] DATA ]
+    [ WITH [ NO | OLD ] DATA ]
 </synopsis>
  </refsynopsisdiv>
 
@@ -37,7 +37,8 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
   <para>
    <command>CREATE MATERIALIZED VIEW</command> defines a materialized view of
    a query.  The query is executed and used to populate the view at the time
-   the command is issued (unless <command>WITH NO DATA</command> is used) and may be
+   the command is issued (unless <command>WITH NO DATA</command> or
+   <command>WITH OLD DATA</command> is used) and may be
    refreshed later using <command>REFRESH MATERIALIZED VIEW</command>.
   </para>
 
@@ -162,7 +163,7 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
    </varlistentry>
 
    <varlistentry>
-    <term><literal>WITH [ NO ] DATA</literal></term>
+    <term><literal>WITH [ NO | OLD ] DATA</literal></term>
     <listitem>
      <para>
       This clause specifies whether or not the materialized view should be
@@ -170,6 +171,15 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
       flagged as unscannable and cannot be queried until <command>REFRESH
       MATERIALIZED VIEW</command> is used.
      </para>
+
+     <para>
+      The form <command>WITH OLD DATA</command> keeps the already stored data
+      when replacing an existing materialized view to keep it populated.  For
+      newly created materialized views, this has the same effect as
+      <command>WITH DATA</command>.  Use this form if you want to use
+      <command>REFRESH MATERIALIZED VIEW CONCURRENTLY</command> as it requires
+      a populated materialized view.
+     </para>
     </listitem>
    </varlistentry>
 
diff --git a/src/backend/commands/createas.c b/src/backend/commands/createas.c
index 9f37ed7f177..0ed44b246bd 100644
--- a/src/backend/commands/createas.c
+++ b/src/backend/commands/createas.c
@@ -332,18 +332,26 @@ ExecCreateTableAs(ParseState *pstate, CreateTableAsStmt *stmt,
 		/* An existing materialized view can be replaced. */
 		if (is_matview && into->replace)
 		{
-			RefreshMatViewStmt *refresh;
-
 			/* Change the relation to match the new query and other options. */
-			(void) create_ctas_nodata(query->targetList, into);
+			address = create_ctas_nodata(query->targetList, into);
 
-			/* Refresh the materialized view with a fake statement. */
-			refresh = makeNode(RefreshMatViewStmt);
-			refresh->relation = into->rel;
-			refresh->skipData = into->skipData;
-			refresh->concurrent = false;
+			/*
+			 * Refresh the materialized view with a fake statement unless we
+			 * must keep the old data.
+			 */
+			if (!into->keepData)
+			{
+				RefreshMatViewStmt *refresh;
+
+				refresh = makeNode(RefreshMatViewStmt);
+				refresh->relation = into->rel;
+				refresh->skipData = into->skipData;
+				refresh->concurrent = false;
+
+				address = ExecRefreshMatView(refresh, pstate->p_sourcetext, qc);
+			}
 
-			return ExecRefreshMatView(refresh, pstate->p_sourcetext, qc);
+			return address;
 		}
 
 		return InvalidObjectAddress;
diff --git a/src/backend/parser/gram.y b/src/backend/parser/gram.y
index 8be790eaccf..e405268f413 100644
--- a/src/backend/parser/gram.y
+++ b/src/backend/parser/gram.y
@@ -4924,6 +4924,22 @@ CreateMatViewStmt:
 					$7->replace = true;
 					$$ = (Node *) ctas;
 				}
+		| CREATE OR REPLACE OptNoLog MATERIALIZED VIEW create_mv_target AS SelectStmt WITH OLD DATA_P
+				{
+					CreateTableAsStmt *ctas = makeNode(CreateTableAsStmt);
+
+					ctas->query = $9;
+					ctas->into = $7;
+					ctas->objtype = OBJECT_MATVIEW;
+					ctas->is_select_into = false;
+					ctas->if_not_exists = false;
+					/* cram additional flags into the IntoClause */
+					$7->rel->relpersistence = $4;
+					$7->skipData = false;
+					$7->keepData = true;
+					$7->replace = true;
+					$$ = (Node *) ctas;
+				}
 		;
 
 create_mv_target:
diff --git a/src/include/nodes/primnodes.h b/src/include/nodes/primnodes.h
index e800d13a6e0..5290e6c0e8a 100644
--- a/src/include/nodes/primnodes.h
+++ b/src/include/nodes/primnodes.h
@@ -169,6 +169,7 @@ typedef struct IntoClause
 	/* materialized view's SELECT query */
 	struct Query *viewQuery pg_node_attr(query_jumble_ignore);
 	bool		skipData;		/* true for WITH NO DATA */
+	bool		keepData;		/* true for WITH OLD DATA */
 	bool		replace;		/* replace existing matview? */
 } IntoClause;
 
diff --git a/src/test/regress/expected/matview.out b/src/test/regress/expected/matview.out
index d4b42da1ddf..f0f52dd1c6c 100644
--- a/src/test/regress/expected/matview.out
+++ b/src/test/regress/expected/matview.out
@@ -751,6 +751,23 @@ SELECT * FROM mvtest_replace;
  3
 (1 row)
 
+-- replace query but keep old data
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 5 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+ a 
+---
+ 3
+(1 row)
+
+REFRESH MATERIALIZED VIEW mvtest_replace;
+SELECT * FROM mvtest_replace;
+ a 
+---
+ 5
+(1 row)
+
 -- add column
 CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
   SELECT 4 AS a, 1 b;
@@ -905,3 +922,14 @@ ERROR:  syntax error at or near "NOT"
 LINE 1: CREATE OR REPLACE MATERIALIZED VIEW IF NOT EXISTS mvtest_rep...
                                                ^
 DROP MATERIALIZED VIEW mvtest_replace;
+-- Create new matview WITH OLD DATA.  This populates the new matview as if
+-- WITH DATA had been specified.
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 17 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+ a  
+----
+ 17
+(1 row)
+
diff --git a/src/test/regress/sql/matview.sql b/src/test/regress/sql/matview.sql
index d6a4dc4b857..91f547e9cb8 100644
--- a/src/test/regress/sql/matview.sql
+++ b/src/test/regress/sql/matview.sql
@@ -338,6 +338,14 @@ SELECT * FROM mvtest_replace; -- error: not populated
 REFRESH MATERIALIZED VIEW mvtest_replace;
 SELECT * FROM mvtest_replace;
 
+-- replace query but keep old data
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 5 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+REFRESH MATERIALIZED VIEW mvtest_replace;
+SELECT * FROM mvtest_replace;
+
 -- add column
 CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
   SELECT 4 AS a, 1 b;
@@ -422,3 +430,10 @@ CREATE OR REPLACE MATERIALIZED VIEW IF NOT EXISTS mvtest_replace AS
   SELECT 1 AS a;
 
 DROP MATERIALIZED VIEW mvtest_replace;
+
+-- Create new matview WITH OLD DATA.  This populates the new matview as if
+-- WITH DATA had been specified.
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 17 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
-- 
2.48.1


--aewcrbystcgftlni--





^ permalink  raw  reply  [nested|flat] 809+ messages in thread

* [PATCH v2 3/3] Replace matview WITH OLD DATA
@ 2024-07-26 21:33  Erik Wienhold <ewie@ewie.name>
  0 siblings, 0 replies; 809+ messages in thread

From: Erik Wienhold @ 2024-07-26 21:33 UTC (permalink / raw)

---
 .../sgml/ref/create_materialized_view.sgml    | 16 +++++++++--
 src/backend/commands/createas.c               | 26 +++++++++++------
 src/backend/parser/gram.y                     | 16 +++++++++++
 src/include/nodes/primnodes.h                 |  1 +
 src/test/regress/expected/matview.out         | 28 +++++++++++++++++++
 src/test/regress/sql/matview.sql              | 15 ++++++++++
 6 files changed, 90 insertions(+), 12 deletions(-)

diff --git a/doc/src/sgml/ref/create_materialized_view.sgml b/doc/src/sgml/ref/create_materialized_view.sgml
index b5a8e3441a..65633b8bfa 100644
--- a/doc/src/sgml/ref/create_materialized_view.sgml
+++ b/doc/src/sgml/ref/create_materialized_view.sgml
@@ -27,7 +27,7 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
     [ WITH ( <replaceable class="parameter">storage_parameter</replaceable> [= <replaceable class="parameter">value</replaceable>] [, ... ] ) ]
     [ TABLESPACE <replaceable class="parameter">tablespace_name</replaceable> ]
     AS <replaceable>query</replaceable>
-    [ WITH [ NO ] DATA ]
+    [ WITH [ NO | OLD ] DATA ]
 </synopsis>
  </refsynopsisdiv>
 
@@ -37,7 +37,8 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
   <para>
    <command>CREATE MATERIALIZED VIEW</command> defines a materialized view of
    a query.  The query is executed and used to populate the view at the time
-   the command is issued (unless <command>WITH NO DATA</command> is used) and may be
+   the command is issued (unless <command>WITH NO DATA</command> or
+   <command>WITH OLD DATA</command> is used) and may be
    refreshed later using <command>REFRESH MATERIALIZED VIEW</command>.
   </para>
 
@@ -160,7 +161,7 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
    </varlistentry>
 
    <varlistentry>
-    <term><literal>WITH [ NO ] DATA</literal></term>
+    <term><literal>WITH [ NO | OLD ] DATA</literal></term>
     <listitem>
      <para>
       This clause specifies whether or not the materialized view should be
@@ -168,6 +169,15 @@ CREATE [ OR REPLACE ] MATERIALIZED VIEW [ IF NOT EXISTS ] <replaceable>table_nam
       flagged as unscannable and cannot be queried until <command>REFRESH
       MATERIALIZED VIEW</command> is used.
      </para>
+
+     <para>
+      The form <command>WITH OLD DATA</command> keeps the already stored data
+      when replacing an existing materialized view to keep it populated.  For
+      newly created materialized views, this has the same effect as
+      <command>WITH DATA</command>.  Use this form if you want to use
+      <command>REFRESH MATERIALIZED VIEW CONCURRENTLY</command> as it requires
+      a populated materialized view.
+     </para>
     </listitem>
    </varlistentry>
 
diff --git a/src/backend/commands/createas.c b/src/backend/commands/createas.c
index c5d78252a1..e2948ac966 100644
--- a/src/backend/commands/createas.c
+++ b/src/backend/commands/createas.c
@@ -334,18 +334,26 @@ ExecCreateTableAs(ParseState *pstate, CreateTableAsStmt *stmt,
 		/* An existing materialized view can be replaced. */
 		if (is_matview && into->replace)
 		{
-			RefreshMatViewStmt *refresh;
-
 			/* Change the relation to match the new query and other options. */
-			(void) create_ctas_nodata(query->targetList, into);
+			address = create_ctas_nodata(query->targetList, into);
 
-			/* Refresh the materialized view with a fake statement. */
-			refresh = makeNode(RefreshMatViewStmt);
-			refresh->relation = into->rel;
-			refresh->skipData = into->skipData;
-			refresh->concurrent = false;
+			/*
+			 * Refresh the materialized view with a fake statement unless we
+			 * must keep the old data.
+			 */
+			if (!into->keepData)
+			{
+				RefreshMatViewStmt *refresh;
+
+				refresh = makeNode(RefreshMatViewStmt);
+				refresh->relation = into->rel;
+				refresh->skipData = into->skipData;
+				refresh->concurrent = false;
+
+				address = ExecRefreshMatView(refresh, NULL, NULL, NULL);
+			}
 
-			return ExecRefreshMatView(refresh, NULL, NULL, NULL);
+			return address;
 		}
 
 		return InvalidObjectAddress;
diff --git a/src/backend/parser/gram.y b/src/backend/parser/gram.y
index b1100bdec1..0647955005 100644
--- a/src/backend/parser/gram.y
+++ b/src/backend/parser/gram.y
@@ -4860,6 +4860,22 @@ CreateMatViewStmt:
 					$7->replace = true;
 					$$ = (Node *) ctas;
 				}
+		| CREATE OR REPLACE OptNoLog MATERIALIZED VIEW create_mv_target AS SelectStmt WITH OLD DATA_P
+				{
+					CreateTableAsStmt *ctas = makeNode(CreateTableAsStmt);
+
+					ctas->query = $9;
+					ctas->into = $7;
+					ctas->objtype = OBJECT_MATVIEW;
+					ctas->is_select_into = false;
+					ctas->if_not_exists = false;
+					/* cram additional flags into the IntoClause */
+					$7->rel->relpersistence = $4;
+					$7->skipData = false;
+					$7->keepData = true;
+					$7->replace = true;
+					$$ = (Node *) ctas;
+				}
 		;
 
 create_mv_target:
diff --git a/src/include/nodes/primnodes.h b/src/include/nodes/primnodes.h
index 4b0ee5d10d..ae84cb522e 100644
--- a/src/include/nodes/primnodes.h
+++ b/src/include/nodes/primnodes.h
@@ -168,6 +168,7 @@ typedef struct IntoClause
 	/* materialized view's SELECT query */
 	Node	   *viewQuery pg_node_attr(query_jumble_ignore);
 	bool		skipData;		/* true for WITH NO DATA */
+	bool		keepData;		/* true for WITH OLD DATA */
 	bool		replace;		/* replace existing matview? */
 } IntoClause;
 
diff --git a/src/test/regress/expected/matview.out b/src/test/regress/expected/matview.out
index cefd0d442c..47dfd88bff 100644
--- a/src/test/regress/expected/matview.out
+++ b/src/test/regress/expected/matview.out
@@ -751,6 +751,23 @@ SELECT * FROM mvtest_replace;
  3
 (1 row)
 
+-- replace query but keep old data
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 5 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+ a 
+---
+ 3
+(1 row)
+
+REFRESH MATERIALIZED VIEW mvtest_replace;
+SELECT * FROM mvtest_replace;
+ a 
+---
+ 5
+(1 row)
+
 -- add column
 CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
   SELECT 4 AS a, 1 b;
@@ -905,3 +922,14 @@ ERROR:  syntax error at or near "NOT"
 LINE 1: CREATE OR REPLACE MATERIALIZED VIEW IF NOT EXISTS mvtest_rep...
                                                ^
 DROP MATERIALIZED VIEW mvtest_replace;
+-- Create new matview WITH OLD DATA.  This populates the new matview as if
+-- WITH DATA had been specified.
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 17 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+ a  
+----
+ 17
+(1 row)
+
diff --git a/src/test/regress/sql/matview.sql b/src/test/regress/sql/matview.sql
index c12f0243c9..b268237c24 100644
--- a/src/test/regress/sql/matview.sql
+++ b/src/test/regress/sql/matview.sql
@@ -338,6 +338,14 @@ SELECT * FROM mvtest_replace; -- error: not populated
 REFRESH MATERIALIZED VIEW mvtest_replace;
 SELECT * FROM mvtest_replace;
 
+-- replace query but keep old data
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 5 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
+REFRESH MATERIALIZED VIEW mvtest_replace;
+SELECT * FROM mvtest_replace;
+
 -- add column
 CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
   SELECT 4 AS a, 1 b;
@@ -422,3 +430,10 @@ CREATE OR REPLACE MATERIALIZED VIEW IF NOT EXISTS mvtest_replace AS
   SELECT 1 AS a;
 
 DROP MATERIALIZED VIEW mvtest_replace;
+
+-- Create new matview WITH OLD DATA.  This populates the new matview as if
+-- WITH DATA had been specified.
+CREATE OR REPLACE MATERIALIZED VIEW mvtest_replace AS
+  SELECT 17 AS a
+  WITH OLD DATA;
+SELECT * FROM mvtest_replace;
-- 
2.45.2


--nrp556lrhtfteavd--





^ permalink  raw  reply  [nested|flat] 809+ messages in thread