agora inbox for [email protected]  

help / color / mirror / Atom feed

Re: Reduce ProcArrayLock contention
804+ messages / 5 participants
[nested] [flat]

* Re: Reduce ProcArrayLock contention
@ 2015-07-24 10:56 Pavan Deolasee <[email protected]>
  2015-07-25 04:42 ` Re: Reduce ProcArrayLock contention Amit Kapila <[email protected]>
  0 siblings, 1 reply; 804+ messages in thread

From: Pavan Deolasee @ 2015-07-24 10:56 UTC (permalink / raw)
  To: Amit Kapila <[email protected]>; +Cc: pgsql-hackers

On Mon, Jun 29, 2015 at 8:57 PM, Amit Kapila <[email protected]>
wrote:

>
>
> pgbench setup
> ------------------------
> scale factor - 300
> Data is on magnetic disk and WAL on ssd.
> pgbench -M prepared tpc-b
>
> Head : commit 51d0fe5d
> Patch -1 : group_xid_clearing_at_trans_end_rel_v1
>
>
> Client Count/TPS18163264128HEAD814609210899199262363617812Patch-110866483
> 11093199083122028237
>
> The graph for the data is attached.
>
>
Numbers look impressive and definitely shows that the idea is worth
pursuing. I tried patch on my laptop. Unfortunately, at least for 4 and 8
clients, I did not see any improvement. In fact, averages over 2 runs
showed a slight 2-4% decline in the tps. Having said that, there is no
reason to disbelieve your numbers and no much powerful machines, we might
see the gains.

BTW I ran the tests with, pgbench -s 10 -c 4 -T 300


Points about performance data
> ---------------------------------------------
> 1.  Gives good performance improvement at or greater than 64 clients
> and give somewhat moderate improvement at lower client count.  The
> reason is that because the contention around ProcArrayLock is mainly
> seen at higher client count.  I have checked that at higher client-count,
> it started behaving lockless (which means performance with patch is
> equivivalent to if we just comment out ProcArrayLock in
> ProcArrayEndTransaction()).
>

Well, I am not entirely sure if thats a correct way of looking at it. Sure,
you would see less contention on the ProcArrayLock because the fact is that
there are far fewer backends trying to acquire it. But those who don't get
the lock will sleep and hence the contention is moved somewhere else, at
least partially.


> 2. There is some noise in this data (at 1 client count, I don't expect
> much difference).
> 3. I have done similar tests on power-8 m/c and found similar gains.
>

As I said, I'm not seeing benefits on my laptop (Macbook Pro, Quad core,
SSD). But then I ran with much lower scale factor and much lesser number of
clients.


> 4. The gains are visible when the data fits in shared_buffers as for other
> workloads I/O starts dominating.
>

Thats seems be perfectly expected.


> 5. I have seen that effect of Patch is much more visible if we keep
> autovacuum = off (do manual vacuum after each run) and keep
> wal_writer_delay to lower value (say 20ms).
>

Do you know why that happens? Is it because the contention moves somewhere
else with autovacuum on?

Regarding the design itself, I've an idea that may be we can create a
general purpose infrastructure to use this technique. If its useful here,
I'm sure there are other places where this can be applied with similar
effect.

For example, how about adding an API such as LWLockDispatchWork(lock, mode,
function_ptr, data_ptr)? Here the data_ptr points to somewhere in shared
memory that the function_ptr can work on once lock is available. If the
lock is available in the requested mode then the function_ptr is executed
with the given data_ptr and the function returns. If the lock is not
available then the work is dispatched to some Q (tracked on per-lock
basis?) and the process goes to sleep. Whenever the lock becomes available
in the requested mode, the work is executed by some other backedn and the
primary process is woken up. This will most likely happen in the
LWLockRelease() path when the last holder is about to give up the lock so
that it becomes available in the requested "mode". Now there is lot of
handwaving here and I'm not sure if the LWLock infrastructure permits us to
add something like this easily. But I thought I will put forward the idea
anyways. In fact, I remember trying something of this sort a long time
back, but can't recollect why I gave up on the idea. May be I did not see
much benefit of the entire approach of clubbing work-pieces and doing them
in a single process. But then I probably did not have access to powerful
machines then to correctly measure the benefits. Hence I'm not willing to
give up on the idea, especially given your test results.

BTW may be the LWLockDispatchWork() makes sense only for EXCLUSIVE locks
because we tend to read from shared memory and populate local structures in
READ mode and that can only happen in the primary backend itself.

Regarding the patch, the compare-and-exchange function calls that you've
used would work only for 64-bit machines, right? You would need to use
equivalent 32-bit calls on a 32-bit machine.

Thanks,
Pavan

-- 
 Pavan Deolasee                   http://www.2ndQuadrant.com/
 PostgreSQL Development, 24x7 Support, Training & Services


^ permalink  raw  reply  [nested|flat] 804+ messages in thread

* Re: Reduce ProcArrayLock contention
  2015-07-24 10:56 Re: Reduce ProcArrayLock contention Pavan Deolasee <[email protected]>
@ 2015-07-25 04:42 ` Amit Kapila <[email protected]>
  2015-07-27 15:17   ` Re: Reduce ProcArrayLock contention Robert Haas <[email protected]>
  2015-07-27 16:22   ` Re: Reduce ProcArrayLock contention Pavan Deolasee <[email protected]>
  0 siblings, 2 replies; 804+ messages in thread

From: Amit Kapila @ 2015-07-25 04:42 UTC (permalink / raw)
  To: Pavan Deolasee <[email protected]>; +Cc: pgsql-hackers

On Fri, Jul 24, 2015 at 4:26 PM, Pavan Deolasee <[email protected]>
wrote:
>
>
>
> On Mon, Jun 29, 2015 at 8:57 PM, Amit Kapila <[email protected]>
wrote:
>>
>>
>>
>> pgbench setup
>> ------------------------
>> scale factor - 300
>> Data is on magnetic disk and WAL on ssd.
>> pgbench -M prepared tpc-b
>>
>> Head : commit 51d0fe5d
>> Patch -1 : group_xid_clearing_at_trans_end_rel_v1
>>
>>
>> Client Count/TPS18163264128
>> HEAD814609210899199262363617812
>> Patch-11086648311093199083122028237
>>
>> The graph for the data is attached.
>>
>
> Numbers look impressive and definitely shows that the idea is worth
pursuing. I tried patch on my laptop. Unfortunately, at least for 4 and 8
clients, I did not see any improvement.
>

I can't help in this because I think we need somewhat
bigger m/c to test the impact of patch.

> In fact, averages over 2 runs showed a slight 2-4% decline in the tps.
Having said that, there is no reason to disbelieve your numbers and no much
powerful machines, we might see the gains.
>
> BTW I ran the tests with, pgbench -s 10 -c 4 -T 300
>

I am not sure if this result is worth worrying to investigate as in
write tests (that too for short duration), such fluctuations can
occur and I think till we see complete results for multiple clients
(1, 4, 8 .. 64 or 128) (possible on some high end m/c), it is difficult
to draw any conclusion.

>
>> Points about performance data
>> ---------------------------------------------
>> 1.  Gives good performance improvement at or greater than 64 clients
>> and give somewhat moderate improvement at lower client count.  The
>> reason is that because the contention around ProcArrayLock is mainly
>> seen at higher client count.  I have checked that at higher client-count,
>> it started behaving lockless (which means performance with patch is
>> equivivalent to if we just comment out ProcArrayLock in
>> ProcArrayEndTransaction()).
>
>
> Well, I am not entirely sure if thats a correct way of looking at it.
Sure, you would see less contention on the ProcArrayLock because the fact
is that there are far fewer backends trying to acquire it.
>

I was telling that fact even without my patch. Basically I have
tried by commenting ProcArrayLock in ProcArrayEndTransaction.

> But those who don't get the lock will sleep and hence the contention is
moved somewhere else, at least partially.
>

Sure, if contention is reduced at one place it will move
to next lock.


>>
>> 4. The gains are visible when the data fits in shared_buffers as for
other
>> workloads I/O starts dominating.
>
>
> Thats seems be perfectly expected.
>
>>
>> 5. I have seen that effect of Patch is much more visible if we keep
>> autovacuum = off (do manual vacuum after each run) and keep
>> wal_writer_delay to lower value (say 20ms).
>
>
> Do you know why that happens? Is it because the contention moves
somewhere else with autovacuum on?
>

No, autovacuum generates I/O due to which sometimes there
is more variation in Write tests.

> Regarding the design itself, I've an idea that may be we can create a
general purpose infrastructure to use this technique.
>

I think this could be beneficial if can comeup with
some clean interface.

> If its useful here, I'm sure there are other places where this can be
applied with similar effect.
>

I also think so.

> For example, how about adding an API such as LWLockDispatchWork(lock,
mode, function_ptr, data_ptr)? Here the data_ptr points to somewhere in
shared memory that the function_ptr can work on once lock is available. If
the lock is available in the requested mode then the function_ptr is
> executed with the given data_ptr and the function returns.
>

I can do something like that if others also agree with this new
API in LWLock series, but personally I don't think LWLock.c is
the right place to expose API for this work.  Broadly the work
we are doing can be thought of below sub-tasks.

1. Advertise each backend's xid.
2. Push all backend's except one on global list.
3. wait till some-one wakes and check if the xid is cleared,
   repeat untll the xid is clear
4. Acquire the lock
5. Pop all the backend's and clear each one's xid and used
   their published xid to advance global latestCompleteXid.
6. Release Lock
7. Wake all the processes waiting for their xid to be cleared
   and before waking mark that Xid of the backend is clear.

So among these only step 2 can be common among different
algorithms, other's need some work specific to each optimization.

Does any one else see a better way to provide a generic API, so
that it can be used for other places if required in future?



> If the lock is not available then the work is dispatched to some Q
(tracked on per-lock basis?) and the process goes to sleep. Whenever the
lock becomes available in the requested mode, the work is executed by some
other backedn and the primary process is woken up. This will most likely
 > happen in the LWLockRelease() path when the last holder is about to give
up the lock so that it becomes available in the requested "mode".
>

I am not able to follow what you want to achieve with this,
Why is 'Q' better than the current process to perform the
work specific to whole group and does 'Q' also wait on the
current lock, if yes how?

I think this will over complicate the stuff without any real
benefit, atleast for this optimization.

>
> Regarding the patch, the compare-and-exchange function calls that you've
used would work only for 64-bit machines, right? You would need to use
equivalent 32-bit calls on a 32-bit machine.
>

I thought that internal API will automatically take care of it,
example for msvc it uses _InterlockedCompareExchange64
which if doesn't work on 32-bit systems or is not defined, then
we have to use 32-bit version, but I am not certain about
that fact.


Note - This patch requires some updation in
src/backend/access/transam/README.



With Regards,
Amit Kapila.
EnterpriseDB: http://www.enterprisedb.com


^ permalink  raw  reply  [nested|flat] 804+ messages in thread

* Re: Reduce ProcArrayLock contention
  2015-07-24 10:56 Re: Reduce ProcArrayLock contention Pavan Deolasee <[email protected]>
  2015-07-25 04:42 ` Re: Reduce ProcArrayLock contention Amit Kapila <[email protected]>
@ 2015-07-27 15:17   ` Robert Haas <[email protected]>
  2015-07-29 14:54     ` Re: Reduce ProcArrayLock contention Amit Kapila <[email protected]>
  1 sibling, 1 reply; 804+ messages in thread

From: Robert Haas @ 2015-07-27 15:17 UTC (permalink / raw)
  To: Amit Kapila <[email protected]>; +Cc: Pavan Deolasee <[email protected]>; pgsql-hackers

On Sat, Jul 25, 2015 at 12:42 AM, Amit Kapila <[email protected]> wrote:
> I thought that internal API will automatically take care of it,
> example for msvc it uses _InterlockedCompareExchange64
> which if doesn't work on 32-bit systems or is not defined, then
> we have to use 32-bit version, but I am not certain about
> that fact.

Instead of using pg_atomic_uint64, how about using pg_atomic_uint32
and storing the pgprocno rather than the pointer directly?  Then it
can work the same way (and be the same size) on every platform.

-- 
Robert Haas
EnterpriseDB: http://www.enterprisedb.com
The Enterprise PostgreSQL Company


-- 
Sent via pgsql-hackers mailing list ([email protected])
To make changes to your subscription:
http://www.postgresql.org/mailpref/pgsql-hackers



^ permalink  raw  reply  [nested|flat] 804+ messages in thread

* Re: Reduce ProcArrayLock contention
  2015-07-24 10:56 Re: Reduce ProcArrayLock contention Pavan Deolasee <[email protected]>
  2015-07-25 04:42 ` Re: Reduce ProcArrayLock contention Amit Kapila <[email protected]>
  2015-07-27 15:17   ` Re: Reduce ProcArrayLock contention Robert Haas <[email protected]>
@ 2015-07-29 14:54     ` Amit Kapila <[email protected]>
  2015-07-29 16:54       ` Re: Reduce ProcArrayLock contention Robert Haas <[email protected]>
  0 siblings, 1 reply; 804+ messages in thread

From: Amit Kapila @ 2015-07-29 14:54 UTC (permalink / raw)
  To: Robert Haas <[email protected]>; +Cc: Pavan Deolasee <[email protected]>; pgsql-hackers

On Mon, Jul 27, 2015 at 8:47 PM, Robert Haas <[email protected]> wrote:
>
> On Sat, Jul 25, 2015 at 12:42 AM, Amit Kapila <[email protected]>
wrote:
> > I thought that internal API will automatically take care of it,
> > example for msvc it uses _InterlockedCompareExchange64
> > which if doesn't work on 32-bit systems or is not defined, then
> > we have to use 32-bit version, but I am not certain about
> > that fact.
>
> Instead of using pg_atomic_uint64, how about using pg_atomic_uint32
> and storing the pgprocno rather than the pointer directly?
>

Good Suggestion!

I think this can work the way you are suggesting and I am working on
same.  Here I have one question,  do you prefer to see the code for
this optimisation be done via some LWLock interface as Pavan is
suggesting?  I am not very sure if LWLock is a good interface for this
work, but surely I can encapsulate it into different functions rather than
doing everything in ProcArrayEndTransaction.


With Regards,
Amit Kapila.
EnterpriseDB: http://www.enterprisedb.com


^ permalink  raw  reply  [nested|flat] 804+ messages in thread

* Re: Reduce ProcArrayLock contention
  2015-07-24 10:56 Re: Reduce ProcArrayLock contention Pavan Deolasee <[email protected]>
  2015-07-25 04:42 ` Re: Reduce ProcArrayLock contention Amit Kapila <[email protected]>
  2015-07-27 15:17   ` Re: Reduce ProcArrayLock contention Robert Haas <[email protected]>
  2015-07-29 14:54     ` Re: Reduce ProcArrayLock contention Amit Kapila <[email protected]>
@ 2015-07-29 16:54       ` Robert Haas <[email protected]>
  2015-07-29 18:18         ` Re: Reduce ProcArrayLock contention Andres Freund <[email protected]>
  0 siblings, 1 reply; 804+ messages in thread

From: Robert Haas @ 2015-07-29 16:54 UTC (permalink / raw)
  To: Amit Kapila <[email protected]>; +Cc: Pavan Deolasee <[email protected]>; pgsql-hackers

On Wed, Jul 29, 2015 at 10:54 AM, Amit Kapila <[email protected]> wrote:
> On Mon, Jul 27, 2015 at 8:47 PM, Robert Haas <[email protected]> wrote:
>> On Sat, Jul 25, 2015 at 12:42 AM, Amit Kapila <[email protected]>
>> wrote:
>> > I thought that internal API will automatically take care of it,
>> > example for msvc it uses _InterlockedCompareExchange64
>> > which if doesn't work on 32-bit systems or is not defined, then
>> > we have to use 32-bit version, but I am not certain about
>> > that fact.
>>
>> Instead of using pg_atomic_uint64, how about using pg_atomic_uint32
>> and storing the pgprocno rather than the pointer directly?
>>
>
> Good Suggestion!
>
> I think this can work the way you are suggesting and I am working on
> same.  Here I have one question,  do you prefer to see the code for
> this optimisation be done via some LWLock interface as Pavan is
> suggesting?  I am not very sure if LWLock is a good interface for this
> work, but surely I can encapsulate it into different functions rather than
> doing everything in ProcArrayEndTransaction.

I would try to avoid changing lwlock.c.  It's pretty easy when so
doing to create mechanisms that work now but make further upgrades to
the general lwlock mechanism difficult.  I'd like to avoid that.

-- 
Robert Haas
EnterpriseDB: http://www.enterprisedb.com
The Enterprise PostgreSQL Company


-- 
Sent via pgsql-hackers mailing list ([email protected])
To make changes to your subscription:
http://www.postgresql.org/mailpref/pgsql-hackers



^ permalink  raw  reply  [nested|flat] 804+ messages in thread

* Re: Reduce ProcArrayLock contention
  2015-07-24 10:56 Re: Reduce ProcArrayLock contention Pavan Deolasee <[email protected]>
  2015-07-25 04:42 ` Re: Reduce ProcArrayLock contention Amit Kapila <[email protected]>
  2015-07-27 15:17   ` Re: Reduce ProcArrayLock contention Robert Haas <[email protected]>
  2015-07-29 14:54     ` Re: Reduce ProcArrayLock contention Amit Kapila <[email protected]>
  2015-07-29 16:54       ` Re: Reduce ProcArrayLock contention Robert Haas <[email protected]>
@ 2015-07-29 18:18         ` Andres Freund <[email protected]>
  2015-07-30 18:32           ` Re: Reduce ProcArrayLock contention Robert Haas <[email protected]>
  2015-07-31 04:41           ` Re: Reduce ProcArrayLock contention Amit Kapila <[email protected]>
  0 siblings, 2 replies; 804+ messages in thread

From: Andres Freund @ 2015-07-29 18:18 UTC (permalink / raw)
  To: Robert Haas <[email protected]>; +Cc: Amit Kapila <[email protected]>; Pavan Deolasee <[email protected]>; pgsql-hackers

On 2015-07-29 12:54:59 -0400, Robert Haas wrote:
> I would try to avoid changing lwlock.c.  It's pretty easy when so
> doing to create mechanisms that work now but make further upgrades to
> the general lwlock mechanism difficult.  I'd like to avoid that.

I'm massively doubtful that re-implementing parts of lwlock.c is the
better outcome. Then you have two different infrastructures you need to
improve over time.


-- 
Sent via pgsql-hackers mailing list ([email protected])
To make changes to your subscription:
http://www.postgresql.org/mailpref/pgsql-hackers



^ permalink  raw  reply  [nested|flat] 804+ messages in thread

* Re: Reduce ProcArrayLock contention
  2015-07-24 10:56 Re: Reduce ProcArrayLock contention Pavan Deolasee <[email protected]>
  2015-07-25 04:42 ` Re: Reduce ProcArrayLock contention Amit Kapila <[email protected]>
  2015-07-27 15:17   ` Re: Reduce ProcArrayLock contention Robert Haas <[email protected]>
  2015-07-29 14:54     ` Re: Reduce ProcArrayLock contention Amit Kapila <[email protected]>
  2015-07-29 16:54       ` Re: Reduce ProcArrayLock contention Robert Haas <[email protected]>
  2015-07-29 18:18         ` Re: Reduce ProcArrayLock contention Andres Freund <[email protected]>
@ 2015-07-30 18:32           ` Robert Haas <[email protected]>
  1 sibling, 0 replies; 804+ messages in thread

From: Robert Haas @ 2015-07-30 18:32 UTC (permalink / raw)
  To: Andres Freund <[email protected]>; +Cc: Amit Kapila <[email protected]>; Pavan Deolasee <[email protected]>; pgsql-hackers

On Wed, Jul 29, 2015 at 2:18 PM, Andres Freund <[email protected]> wrote:
> On 2015-07-29 12:54:59 -0400, Robert Haas wrote:
>> I would try to avoid changing lwlock.c.  It's pretty easy when so
>> doing to create mechanisms that work now but make further upgrades to
>> the general lwlock mechanism difficult.  I'd like to avoid that.
>
> I'm massively doubtful that re-implementing parts of lwlock.c is the
> better outcome. Then you have two different infrastructures you need to
> improve over time.

That is also true, but I don't think we're going to be duplicating
anything from lwlock.c in this case.

-- 
Robert Haas
EnterpriseDB: http://www.enterprisedb.com
The Enterprise PostgreSQL Company


-- 
Sent via pgsql-hackers mailing list ([email protected])
To make changes to your subscription:
http://www.postgresql.org/mailpref/pgsql-hackers



^ permalink  raw  reply  [nested|flat] 804+ messages in thread

* Re: Reduce ProcArrayLock contention
  2015-07-24 10:56 Re: Reduce ProcArrayLock contention Pavan Deolasee <[email protected]>
  2015-07-25 04:42 ` Re: Reduce ProcArrayLock contention Amit Kapila <[email protected]>
  2015-07-27 15:17   ` Re: Reduce ProcArrayLock contention Robert Haas <[email protected]>
  2015-07-29 14:54     ` Re: Reduce ProcArrayLock contention Amit Kapila <[email protected]>
  2015-07-29 16:54       ` Re: Reduce ProcArrayLock contention Robert Haas <[email protected]>
  2015-07-29 18:18         ` Re: Reduce ProcArrayLock contention Andres Freund <[email protected]>
@ 2015-07-31 04:41           ` Amit Kapila <[email protected]>
  1 sibling, 0 replies; 804+ messages in thread

From: Amit Kapila @ 2015-07-31 04:41 UTC (permalink / raw)
  To: Andres Freund <[email protected]>; +Cc: Robert Haas <[email protected]>; Pavan Deolasee <[email protected]>; pgsql-hackers

On Wed, Jul 29, 2015 at 11:48 PM, Andres Freund <[email protected]> wrote:
>
> On 2015-07-29 12:54:59 -0400, Robert Haas wrote:
> > I would try to avoid changing lwlock.c.  It's pretty easy when so
> > doing to create mechanisms that work now but make further upgrades to
> > the general lwlock mechanism difficult.  I'd like to avoid that.
>
> I'm massively doubtful that re-implementing parts of lwlock.c is the
> better outcome. Then you have two different infrastructures you need to
> improve over time.

I agree and modified the patch to use 32-bit atomics based on idea
suggested by Robert and didn't modify lwlock.c.



> I understand. IMHO it will be a good idea though to ensure that the patch
does not cause regression for other setups such as a less powerful
> machine or while running with lower number of clients.
>

Okay, I have tried it on CentOS VM, but the data is totally screwed (at
same client count across 2 runs the variation is quite high ranging from 300
to 3000 tps) to make any meaning out of it.  I think if you want to collect
data
on less powerful m/c, then also atleast we should ensure that it is taken in
a way that we are sure that it is not due to noise and there is actual
regression,
then only we can decide whether we should investigate that or not.
Can you please try taking data with attached script
(perf_pgbench_tpcb_write.sh), few things you need to change in script
based on your setup (environment variables defined in beginning of script
like PGDATA), other thing is that you need to ensure that name of binaries
for HEAD and Patch should be changed in script if you are naming them
differently.  It will generate the performance data in test*.txt files.
Also try
to ensure that checkpoint should be configured such that it should not
occur in-between tests, else it will be difficult to conclude the results.
Some parameters you might want to consider for the same are
checkpoint_timeout, checkpoint_completion_target, min_wal_size,
max_wal_size.

>>
>>
>> I was telling that fact even without my patch. Basically I have
>> tried by commenting ProcArrayLock in ProcArrayEndTransaction.
>>

> I did not get that. You mean the TPS is same if you run with commenting
out ProcArrayLock in ProcArrayEndTransaction?

Yes, TPS is almost same as with Patch.

> Is that safe to do?

No, that is not safe.  I have done that just to see what is the maximum
gain we can get by reducing the contention around ProcArrayLock.

>>
>>
>>
>> No, autovacuum generates I/O due to which sometimes there
>> is more variation in Write tests.


> Sure, but on an average does it still show similar improvements?
>

Yes, number with and without autovacuum show similar trend, it's just
that you can see somewhat better results (more performance improvement)
with autovacuum=off and do manual vacuum at end of each test.

> Or does the test becomes IO bound and hence the bottleneck shifts
somewhere
> else? Can you please post those numbers as well when you get chance?

The numbers posted in initial mail or in this mail are with autovacuum =on.

>>
>>
>>
>> So among these only step 2 can be common among different
>> algorithms, other's need some work specific to each optimization.
>>

> Right, but if we could encapsulate that work in a function that just
needs to work on some shared memory, I think we can build such
infrastructure.

For now, I have encapsulated the code into 2 separate functions, rather
than extending LWLock.c as that could easily lead to code which might
not be used in future even though currently it sounds like that and
in-future
if we need to use same technique elsewhere then we can look into it.

>
>
>> >
>> > Regarding the patch, the compare-and-exchange function calls that
you've used would work only for 64-bit machines, right? You would need to
use equivalent 32-bit calls on a 32-bit machine.
> >
>>
>> I thought that internal API will automatically take care of it,
>> example for msvc it uses _InterlockedCompareExchange64
>> which if doesn't work on 32-bit systems or is not defined, then
>> we have to use 32-bit version, but I am not certain about
>> that fact.
>>

> Hmm. The pointer will be a 32-bit field on a 32-bit machine. I don't know
how exchanging that with 64-bit integer be safe.
>

True, but that has to be in-general taken care by 64bit atomic API's,
like in this case it should fallback to either 32-bit version of API or
something that can work on 32-bit m/c.  I think fallback support
is missing as of now in 64-bit API's which we should have if we want
to use those API's, but anyway for now I have modified the patch to
use 32-bit atomics.


Performance Data with modified patch.

pgbench setup
------------------------
scale factor - 300
Data is on magnetic disk and WAL on ssd.
pgbench -M prepared tpc-b

Data is median of 3 - 30 min runs, the detailed data for
all the 3 runs is in attached document
(perf_write_procarraylock_data.ods)

Head : commit c53f7387
Patch : group_xid_clearing_at_trans_end_rel_v2

Client_Count/Patch_ver (TPS) 1 8 16 32 64 128 HEAD 972 6004 11060 20074
23839 17798 Patch 1005 6260 11368 20318 30775 30215



With Regards,
Amit Kapila.
EnterpriseDB: http://www.enterprisedb.com


-- 
Sent via pgsql-hackers mailing list ([email protected])
To make changes to your subscription:
http://www.postgresql.org/mailpref/pgsql-hackers


Attachments:

  [application/octet-stream] group_xid_clearing_at_trans_end_v2.patch (10.2K, ../../CAA4eK1KfbrSwLgx9oyMU7AzOOafyNS0eb1QVSa2PnU5+0XXLhg@mail.gmail.com/3-group_xid_clearing_at_trans_end_v2.patch)
  download | inline diff:
diff --git a/src/backend/storage/ipc/procarray.c b/src/backend/storage/ipc/procarray.c
index 4f3c5c9..b3b7efe 100644
--- a/src/backend/storage/ipc/procarray.c
+++ b/src/backend/storage/ipc/procarray.c
@@ -167,6 +167,8 @@ static int KnownAssignedXidsGetAndSetXmin(TransactionId *xarray,
 static TransactionId KnownAssignedXidsGetOldestXmin(void);
 static void KnownAssignedXidsDisplay(int trace_level);
 static void KnownAssignedXidsReset(void);
+static bool PushProcAndWaitForXidClear(PGPROC *proc, TransactionId latestXid);
+static void PopProcsAndClearXids(void);
 
 /*
  * Report shared-memory space needed by CreateSharedProcArray.
@@ -399,26 +401,41 @@ ProcArrayEndTransaction(PGPROC *proc, TransactionId latestXid)
 		 */
 		Assert(TransactionIdIsValid(allPgXact[proc->pgprocno].xid));
 
-		LWLockAcquire(ProcArrayLock, LW_EXCLUSIVE);
-
-		pgxact->xid = InvalidTransactionId;
-		proc->lxid = InvalidLocalTransactionId;
-		pgxact->xmin = InvalidTransactionId;
-		/* must be cleared with xid/xmin: */
-		pgxact->vacuumFlags &= ~PROC_VACUUM_STATE_MASK;
-		pgxact->delayChkpt = false;		/* be sure this is cleared in abort */
-		proc->recoveryConflictPending = false;
-
-		/* Clear the subtransaction-XID cache too while holding the lock */
-		pgxact->nxids = 0;
-		pgxact->overflowed = false;
+		/*
+		 * If we get the lock then clear the advertised Xid, else push this
+		 * proc to global list of proc's for which Xid needs to be cleared
+		 * and wait for xid to get cleared.  If this is the first proc on
+		 * global list, then clear xid's of all the proc's on list and wake
+		 * them.
+		 */
+		if (LWLockConditionalAcquire(ProcArrayLock, LW_EXCLUSIVE))
+		{
+			pgxact->xid = InvalidTransactionId;
+			proc->lxid = InvalidLocalTransactionId;
+			pgxact->xmin = InvalidTransactionId;
+			/* must be cleared with xid/xmin: */
+			pgxact->vacuumFlags &= ~PROC_VACUUM_STATE_MASK;
+			pgxact->delayChkpt = false;		/* be sure this is cleared in abort */
+			proc->recoveryConflictPending = false;
+
+			/* Clear the subtransaction-XID cache too while holding the lock */
+			pgxact->nxids = 0;
+			pgxact->overflowed = false;
+
+			/* Also advance global latestCompletedXid while holding the lock */
+			if (TransactionIdPrecedes(ShmemVariableCache->latestCompletedXid,
+									  latestXid))
+				ShmemVariableCache->latestCompletedXid = latestXid;
 
-		/* Also advance global latestCompletedXid while holding the lock */
-		if (TransactionIdPrecedes(ShmemVariableCache->latestCompletedXid,
-								  latestXid))
-			ShmemVariableCache->latestCompletedXid = latestXid;
+			LWLockRelease(ProcArrayLock);
+		}
+		else
+		{
+			if (PushProcAndWaitForXidClear(proc, latestXid))
+				return;
 
-		LWLockRelease(ProcArrayLock);
+			PopProcsAndClearXids();
+		}
 	}
 	else
 	{
@@ -441,6 +458,169 @@ ProcArrayEndTransaction(PGPROC *proc, TransactionId latestXid)
 	}
 }
 
+/*
+ * PushProcAndWaitForXidClear -- wait for xid to be cleared
+ *
+ * This sets the flag (which indicates that advertised Xid needs to
+ * be clear for this proc) and push this proc to list of proc's for
+ * which Xid needs to be cleared.  Except one proc, all other proc's
+ * will wait for their Xid to be cleared.  To set the appropriate value
+ * for ShmemVariableCache->latestCompletedXid, we need to advertise
+ * latestXid which will be later used by the backend that clears the
+ * xid's of procs on global list.
+ *
+ * Returns true, if xid is cleared, else false.
+ */
+bool
+PushProcAndWaitForXidClear(PGPROC *proc, TransactionId latestXid)
+{
+	/* use volatile pointer to prevent code rearrangement */
+	volatile PROC_HDR *procglobal = ProcGlobal;
+	uint32 nonempty_nextClearXidElem;
+	int			extraWaits = 0;
+
+	proc->clearXid = true;
+
+	/*
+	 * Add the proc to the list of proc's for which Xid needs to be
+	 * cleared and advertise the latestXid, so that latestCompletedXid
+	 * can be updated by the process which clears current process xid.
+	 */
+	proc->backendLatestXid = latestXid;
+	while (true)
+	{
+		proc->nextClearXidElem = pg_atomic_read_u32((volatile pg_atomic_uint32*)&procglobal->nextClearXidElem);
+
+		/*
+		 * Read barrier is required here to ensure that we read the
+		 * head of list containing the proc's whose xid needs to be
+		 * cleared before pushing the proc to list.  The head of list
+		 * will be used to decide if the proc needs to wait for it's
+		 * xid to get cleared or will proceed to clear the xid's of
+		 * all other proc's on list.
+		 */
+		pg_read_barrier();
+		nonempty_nextClearXidElem = proc->nextClearXidElem;
+		if (pg_atomic_compare_exchange_u32((volatile pg_atomic_uint32*) &procglobal->nextClearXidElem,
+											(uint32*)&proc->nextClearXidElem,
+											(uint32)proc->pgprocno))
+			break;
+	}
+
+	/*
+	 * only first process which has seen the list of proc's for which Xid
+	 * needs to be cleared as empty will group clear all the xid's on that
+	 * list, all other processes will wait for their xid to be cleared.
+	 */
+	if (nonempty_nextClearXidElem != 0)
+	{
+		for (;;)
+		{
+			PGSemaphoreLock(&proc->sem);
+			if (!proc->clearXid)
+			{
+				/*
+				 * Fix the process wait semaphore's count for any absorbed wakeups.
+				 */
+				while (extraWaits-- > 0)
+					PGSemaphoreUnlock(&proc->sem);
+				return true;
+			}
+			extraWaits++;
+		}
+	}
+
+	return false;
+}
+
+/*
+ * PopProcsAndClearXids -- clear the Xids of procs.
+ *
+ * At-a-time, there will be only one proc that is allowed to clear
+ * the Xids.  The only allowed proc will attempt the lock acquiration
+ * and after acquring the lock, pop all of the requests off the list
+ * using compare-and-swap, servicing each one before moving to next proc,
+ * and clearing their Xids.  After servicing all the requests on list,
+ * release the lock and once again go through the saved list and wake
+ * all the processes waiting for their Xid to be cleared.
+ */
+void
+PopProcsAndClearXids(void)
+{
+	/* use volatile pointer to prevent code rearrangement */
+	volatile PROC_HDR *procglobal = ProcGlobal;
+	uint32	pendingClearXidElem, wake_pendingClearXidElem;
+	PGPROC		*proc_to_clear;
+	PGXACT		*pgxact_to_clear;
+
+	LWLockAcquire(ProcArrayLock, LW_EXCLUSIVE);
+
+	while (true)
+	{
+		pendingClearXidElem = pg_atomic_read_u32((volatile pg_atomic_uint32*)&procglobal->nextClearXidElem);
+		if (pg_atomic_compare_exchange_u32((volatile pg_atomic_uint32*) &procglobal->nextClearXidElem,
+											(uint32*)&pendingClearXidElem,
+											(uint32)0))
+			break;
+	}
+
+	/* save the list of procs whose xid needs to be cleared to wake them up. */
+	wake_pendingClearXidElem = pendingClearXidElem;
+
+	while (pendingClearXidElem)
+	{
+		proc_to_clear = &allProcs[pendingClearXidElem];
+
+		pgxact_to_clear = &allPgXact[proc_to_clear->pgprocno];
+
+		pgxact_to_clear->xid = InvalidTransactionId;
+		proc_to_clear->lxid = InvalidLocalTransactionId;
+		pgxact_to_clear->xmin = InvalidTransactionId;
+		/* must be cleared with xid/xmin: */
+		pgxact_to_clear->vacuumFlags &= ~PROC_VACUUM_STATE_MASK;
+		pgxact_to_clear->delayChkpt = false;		/* be sure this is cleared in abort */
+		proc_to_clear->recoveryConflictPending = false;
+
+		/* Clear the subtransaction-XID cache too while holding the lock */
+		pgxact_to_clear->nxids = 0;
+		pgxact_to_clear->overflowed = false;
+
+
+		/* Also advance global latestCompletedXid while holding the lock */
+		if (TransactionIdPrecedes(ShmemVariableCache->latestCompletedXid,
+									proc_to_clear->backendLatestXid))
+			ShmemVariableCache->latestCompletedXid = proc_to_clear->backendLatestXid;
+
+		/*
+		 * move to next proc in list.
+		 */
+		pendingClearXidElem = proc_to_clear->nextClearXidElem;
+	}
+
+	LWLockRelease(ProcArrayLock);
+
+	while (wake_pendingClearXidElem)
+	{
+		proc_to_clear = &allProcs[wake_pendingClearXidElem];
+
+		wake_pendingClearXidElem = proc_to_clear->nextClearXidElem;
+
+		/* Mark that Xid has cleared for this proc */
+		proc_to_clear->clearXid = false;
+
+		/*
+		 * Write barrier is required here to ensure that before waking
+		 * the proc whose xid got cleared, we set the flag to indicate
+		 * the same.  After waking if process finds that the flag is not
+		 * cleared, then it can again go to sleep with no one to wake that
+		 * process.
+		 */
+		pg_write_barrier();
+
+		if (proc_to_clear != MyProc)
+			PGSemaphoreUnlock(&proc_to_clear->sem);
+	}
+}
 
 /*
  * ProcArrayClearTransaction -- clear the transaction fields
diff --git a/src/backend/storage/lmgr/proc.c b/src/backend/storage/lmgr/proc.c
index 884e91b..fea1edd 100644
--- a/src/backend/storage/lmgr/proc.c
+++ b/src/backend/storage/lmgr/proc.c
@@ -264,6 +264,8 @@ InitProcGlobal(void)
 			SHMQueueInit(&(procs[i].myProcLocks[j]));
 	}
 
+	pg_atomic_init_u32(&ProcGlobal->nextClearXidElem, 0);
+
 	/*
 	 * Save pointers to the blocks of PGPROC structures reserved for auxiliary
 	 * processes and prepared transactions.
@@ -393,6 +395,11 @@ InitProcess(void)
 	MyProc->syncRepState = SYNC_REP_NOT_WAITING;
 	SHMQueueElemInit(&(MyProc->syncRepLinks));
 
+	/* Initialize fields for clearing XID */
+	MyProc->clearXid = false;
+	MyProc->backendLatestXid = InvalidTransactionId;
+	MyProc->nextClearXidElem = 0;
+
 	/*
 	 * Acquire ownership of the PGPROC's latch, so that we can use WaitLatch
 	 * on it.  That allows us to repoint the process latch, which so far
diff --git a/src/include/storage/proc.h b/src/include/storage/proc.h
index 202a672..9981b61 100644
--- a/src/include/storage/proc.h
+++ b/src/include/storage/proc.h
@@ -135,6 +135,18 @@ struct PGPROC
 
 	struct XidCache subxids;	/* cache for subtransaction XIDs */
 
+	/*
+	 * Info to allow us to advertise that we want backend
+	 * holding the ProcArrayLock can clear our xid.
+	 */
+	bool			clearXid;
+	TransactionId	backendLatestXid;
+	/*
+	 * index of link if process is in list of proc's for which
+	 * xid needs to be cleared.
+	 */
+	uint32			nextClearXidElem;
+
 	/* Per-backend LWLock.  Protects fields below. */
 	LWLock	   *backendLock;	/* protects the fields below */
 
@@ -196,6 +208,11 @@ typedef struct PROC_HDR
 	PGPROC	   *autovacFreeProcs;
 	/* Head of list of bgworker free PGPROC structures */
 	PGPROC	   *bgworkerFreeProcs;
+	/*
+	 * Head of list of indexes for PGPROC structures that need to have
+	 * their XIDs cleared
+	 */
+	pg_atomic_uint32 nextClearXidElem;
 	/* WALWriter process's latch */
 	Latch	   *walwriterLatch;
 	/* Checkpointer process's latch */


  [application/x-sh] perf_pgbench_tpcb_write.sh (2.0K, ../../CAA4eK1KfbrSwLgx9oyMU7AzOOafyNS0eb1QVSa2PnU5+0XXLhg@mail.gmail.com/4-perf_pgbench_tpcb_write.sh)
  download

  [application/vnd.oasis.opendocument.spreadsheet] perf_write_procarraylock_data.ods (17.6K, ../../CAA4eK1KfbrSwLgx9oyMU7AzOOafyNS0eb1QVSa2PnU5+0XXLhg@mail.gmail.com/5-perf_write_procarraylock_data.ods)
  download

^ permalink  raw  reply  [nested|flat] 804+ messages in thread

* Re: Reduce ProcArrayLock contention
  2015-07-24 10:56 Re: Reduce ProcArrayLock contention Pavan Deolasee <[email protected]>
  2015-07-25 04:42 ` Re: Reduce ProcArrayLock contention Amit Kapila <[email protected]>
@ 2015-07-27 16:22   ` Pavan Deolasee <[email protected]>
  1 sibling, 0 replies; 804+ messages in thread

From: Pavan Deolasee @ 2015-07-27 16:22 UTC (permalink / raw)
  To: Amit Kapila <[email protected]>; +Cc: pgsql-hackers

On Sat, Jul 25, 2015 at 10:12 AM, Amit Kapila <[email protected]>
wrote:

>
> >>
> >
> > Numbers look impressive and definitely shows that the idea is worth
> pursuing. I tried patch on my laptop. Unfortunately, at least for 4 and 8
> clients, I did not see any improvement.
> >
>
> I can't help in this because I think we need somewhat
> bigger m/c to test the impact of patch.
>
>
I understand. IMHO it will be a good idea though to ensure that the patch
does not cause regression for other setups such as a less powerful machine
or while running with lower number of clients.


>
> I was telling that fact even without my patch. Basically I have
> tried by commenting ProcArrayLock in ProcArrayEndTransaction.
>
>
I did not get that. You mean the TPS is same if you run with commenting out
ProcArrayLock in ProcArrayEndTransaction? Is that safe to do?


> > But those who don't get the lock will sleep and hence the contention is
> moved somewhere else, at least partially.
> >
>
> Sure, if contention is reduced at one place it will move
> to next lock.
>

What I meant was that the lock may not show up in the contention because
all but one processes now sleep for their work to do be done by the group
leader. So the total time spent in the critical section remains the same,
but not shown in the profile. Sure, your benchmark numbers show this is
still better than all processes contending for the lock.


>
>
> No, autovacuum generates I/O due to which sometimes there
> is more variation in Write tests.
>

Sure, but on an average does it still show similar improvements? Or does
the test becomes IO bound and hence the bottleneck shifts somewhere else?
Can you please post those numbers as well when you get chance?


>
> I can do something like that if others also agree with this new
> API in LWLock series, but personally I don't think LWLock.c is
> the right place to expose API for this work.  Broadly the work
> we are doing can be thought of below sub-tasks.
>
> 1. Advertise each backend's xid.
> 2. Push all backend's except one on global list.
> 3. wait till some-one wakes and check if the xid is cleared,
>    repeat untll the xid is clear
> 4. Acquire the lock
> 5. Pop all the backend's and clear each one's xid and used
>    their published xid to advance global latestCompleteXid.
> 6. Release Lock
> 7. Wake all the processes waiting for their xid to be cleared
>    and before waking mark that Xid of the backend is clear.
>
> So among these only step 2 can be common among different
> algorithms, other's need some work specific to each optimization.
>
>
Right, but if we could encapsulate that work in a function that just needs
to work on some shared memory, I think we can build such infrastructure.
Its possible though a more elaborate infrastructure is needed that just one
function pointer. For example, in this case, we also want to set the
latestCompletedXid after clearing xids for all pending processes.


>
> >
> > Regarding the patch, the compare-and-exchange function calls that you've
> used would work only for 64-bit machines, right? You would need to use
> equivalent 32-bit calls on a 32-bit machine.
> >
>
> I thought that internal API will automatically take care of it,
> example for msvc it uses _InterlockedCompareExchange64
> which if doesn't work on 32-bit systems or is not defined, then
> we have to use 32-bit version, but I am not certain about
> that fact.
>
>
Hmm. The pointer will be a 32-bit field on a 32-bit machine. I don't know
how exchanging that with 64-bit integer be safe.

Thanks,
Pavan


-- 
 Pavan Deolasee                   http://www.2ndQuadrant.com/
 PostgreSQL Development, 24x7 Support, Training & Services


^ permalink  raw  reply  [nested|flat] 804+ messages in thread

* [PATCH v1 2/4] autovac: resolve relopts before vacuuming
@ 2025-06-23 19:42 Nathan Bossart <[email protected]>
  0 siblings, 0 replies; 804+ messages in thread

From: Nathan Bossart @ 2025-06-23 19:42 UTC (permalink / raw)

---
 src/backend/commands/vacuum.c       |  7 ++--
 src/backend/postmaster/autovacuum.c | 52 +++++++++++++++++++++--------
 2 files changed, 44 insertions(+), 15 deletions(-)

diff --git a/src/backend/commands/vacuum.c b/src/backend/commands/vacuum.c
index 33a33bf6b1c..0015b9ef4b0 100644
--- a/src/backend/commands/vacuum.c
+++ b/src/backend/commands/vacuum.c
@@ -421,7 +421,7 @@ ExecVacuum(ParseState *pstate, VacuumStmt *vacstmt, bool isTopLevel)
 	/*
 	 * Later, in vacuum_rel(), we check if a reloption override was specified.
 	 */
-	params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+	params.max_eager_freeze_failure_rate = -1.0;
 
 	/*
 	 * Create special memory context for cross-transaction storage.
@@ -2195,10 +2195,13 @@ vacuum_rel(Oid relid, RangeVar *relation, VacuumParams *params,
 	 * Check if the vacuum_max_eager_freeze_failure_rate table storage
 	 * parameter was specified. This overrides the GUC value.
 	 */
-	if (rel->rd_options != NULL &&
+	if (params->max_eager_freeze_failure_rate < 0 &&
+		rel->rd_options != NULL &&
 		((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate >= 0)
 		params->max_eager_freeze_failure_rate =
 			((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate;
+	else
+		params->max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
 
 	/*
 	 * Set truncate option based on truncate reloption or GUC if it wasn't
diff --git a/src/backend/postmaster/autovacuum.c b/src/backend/postmaster/autovacuum.c
index f86c9fed853..3bedca971ff 100644
--- a/src/backend/postmaster/autovacuum.c
+++ b/src/backend/postmaster/autovacuum.c
@@ -2758,6 +2758,9 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		int			multixact_freeze_table_age;
 		int			log_min_duration;
 		AutoVacOpts *avopts = (relopts ? &relopts->autovacuum : NULL);
+		VacOptValue index_cleanup;
+		VacOptValue truncate;
+		double		max_eager_freeze_failure_rate;
 
 		/*
 		 * Calculate the vacuum cost parameters and the freeze ages.  If there
@@ -2790,6 +2793,39 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			? avopts->multixact_freeze_table_age
 			: default_multixact_freeze_table_age;
 
+		if (relopts)
+		{
+			switch (relopts->vacuum_index_cleanup)
+			{
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_AUTO:
+					index_cleanup = VACOPTVALUE_AUTO;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_ON:
+					index_cleanup = VACOPTVALUE_ENABLED;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_OFF:
+					index_cleanup = VACOPTVALUE_DISABLED;
+					break;
+			}
+		}
+		else
+			index_cleanup = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_truncate_set)
+		{
+			if (relopts->vacuum_truncate)
+				truncate = VACOPTVALUE_ENABLED;
+			else
+				truncate = VACOPTVALUE_DISABLED;
+		}
+		else
+			truncate = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_max_eager_freeze_failure_rate >= 0)
+			max_eager_freeze_failure_rate = relopts->vacuum_max_eager_freeze_failure_rate;
+		else
+			max_eager_freeze_failure_rate = -1.0;
+
 		tab = palloc(sizeof(autovac_table));
 		tab->at_relid = relid;
 		tab->at_sharedrel = classForm->relisshared;
@@ -2806,13 +2842,8 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			(doanalyze ? VACOPT_ANALYZE : 0) |
 			(!wraparound ? VACOPT_SKIP_LOCKED : 0);
 
-		/*
-		 * index_cleanup and truncate are unspecified at first in autovacuum.
-		 * They will be filled in with usable values using their reloptions
-		 * (or reloption defaults) later.
-		 */
-		tab->at_params.index_cleanup = VACOPTVALUE_UNSPECIFIED;
-		tab->at_params.truncate = VACOPTVALUE_UNSPECIFIED;
+		tab->at_params.index_cleanup = index_cleanup;
+		tab->at_params.truncate = truncate;
 		/* As of now, we don't support parallel vacuum for autovacuum */
 		tab->at_params.nworkers = -1;
 		tab->at_params.freeze_min_age = freeze_min_age;
@@ -2822,12 +2853,7 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		tab->at_params.is_wraparound = wraparound;
 		tab->at_params.log_min_duration = log_min_duration;
 		tab->at_params.toast_parent = InvalidOid;
-
-		/*
-		 * Later, in vacuum_rel(), we check reloptions for any
-		 * vacuum_max_eager_freeze_failure_rate override.
-		 */
-		tab->at_params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+		tab->at_params.max_eager_freeze_failure_rate = max_eager_freeze_failure_rate;
 		tab->at_storage_param_vac_cost_limit = avopts ?
 			avopts->vacuum_cost_limit : 0;
 		tab->at_storage_param_vac_cost_delay = avopts ?
-- 
2.39.5 (Apple Git-154)


--QWBYbd5Ar5k8NvSv
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
	filename=v1-0003-autovac-combine-reloptions-correctly.patch



^ permalink  raw  reply  [nested|flat] 804+ messages in thread

* [PATCH v1 2/4] autovac: resolve relopts before vacuuming
@ 2025-06-23 19:42 Nathan Bossart <[email protected]>
  0 siblings, 0 replies; 804+ messages in thread

From: Nathan Bossart @ 2025-06-23 19:42 UTC (permalink / raw)

---
 src/backend/commands/vacuum.c       |  7 ++--
 src/backend/postmaster/autovacuum.c | 52 +++++++++++++++++++++--------
 2 files changed, 44 insertions(+), 15 deletions(-)

diff --git a/src/backend/commands/vacuum.c b/src/backend/commands/vacuum.c
index 33a33bf6b1c..0015b9ef4b0 100644
--- a/src/backend/commands/vacuum.c
+++ b/src/backend/commands/vacuum.c
@@ -421,7 +421,7 @@ ExecVacuum(ParseState *pstate, VacuumStmt *vacstmt, bool isTopLevel)
 	/*
 	 * Later, in vacuum_rel(), we check if a reloption override was specified.
 	 */
-	params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+	params.max_eager_freeze_failure_rate = -1.0;
 
 	/*
 	 * Create special memory context for cross-transaction storage.
@@ -2195,10 +2195,13 @@ vacuum_rel(Oid relid, RangeVar *relation, VacuumParams *params,
 	 * Check if the vacuum_max_eager_freeze_failure_rate table storage
 	 * parameter was specified. This overrides the GUC value.
 	 */
-	if (rel->rd_options != NULL &&
+	if (params->max_eager_freeze_failure_rate < 0 &&
+		rel->rd_options != NULL &&
 		((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate >= 0)
 		params->max_eager_freeze_failure_rate =
 			((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate;
+	else
+		params->max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
 
 	/*
 	 * Set truncate option based on truncate reloption or GUC if it wasn't
diff --git a/src/backend/postmaster/autovacuum.c b/src/backend/postmaster/autovacuum.c
index f86c9fed853..3bedca971ff 100644
--- a/src/backend/postmaster/autovacuum.c
+++ b/src/backend/postmaster/autovacuum.c
@@ -2758,6 +2758,9 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		int			multixact_freeze_table_age;
 		int			log_min_duration;
 		AutoVacOpts *avopts = (relopts ? &relopts->autovacuum : NULL);
+		VacOptValue index_cleanup;
+		VacOptValue truncate;
+		double		max_eager_freeze_failure_rate;
 
 		/*
 		 * Calculate the vacuum cost parameters and the freeze ages.  If there
@@ -2790,6 +2793,39 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			? avopts->multixact_freeze_table_age
 			: default_multixact_freeze_table_age;
 
+		if (relopts)
+		{
+			switch (relopts->vacuum_index_cleanup)
+			{
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_AUTO:
+					index_cleanup = VACOPTVALUE_AUTO;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_ON:
+					index_cleanup = VACOPTVALUE_ENABLED;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_OFF:
+					index_cleanup = VACOPTVALUE_DISABLED;
+					break;
+			}
+		}
+		else
+			index_cleanup = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_truncate_set)
+		{
+			if (relopts->vacuum_truncate)
+				truncate = VACOPTVALUE_ENABLED;
+			else
+				truncate = VACOPTVALUE_DISABLED;
+		}
+		else
+			truncate = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_max_eager_freeze_failure_rate >= 0)
+			max_eager_freeze_failure_rate = relopts->vacuum_max_eager_freeze_failure_rate;
+		else
+			max_eager_freeze_failure_rate = -1.0;
+
 		tab = palloc(sizeof(autovac_table));
 		tab->at_relid = relid;
 		tab->at_sharedrel = classForm->relisshared;
@@ -2806,13 +2842,8 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			(doanalyze ? VACOPT_ANALYZE : 0) |
 			(!wraparound ? VACOPT_SKIP_LOCKED : 0);
 
-		/*
-		 * index_cleanup and truncate are unspecified at first in autovacuum.
-		 * They will be filled in with usable values using their reloptions
-		 * (or reloption defaults) later.
-		 */
-		tab->at_params.index_cleanup = VACOPTVALUE_UNSPECIFIED;
-		tab->at_params.truncate = VACOPTVALUE_UNSPECIFIED;
+		tab->at_params.index_cleanup = index_cleanup;
+		tab->at_params.truncate = truncate;
 		/* As of now, we don't support parallel vacuum for autovacuum */
 		tab->at_params.nworkers = -1;
 		tab->at_params.freeze_min_age = freeze_min_age;
@@ -2822,12 +2853,7 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		tab->at_params.is_wraparound = wraparound;
 		tab->at_params.log_min_duration = log_min_duration;
 		tab->at_params.toast_parent = InvalidOid;
-
-		/*
-		 * Later, in vacuum_rel(), we check reloptions for any
-		 * vacuum_max_eager_freeze_failure_rate override.
-		 */
-		tab->at_params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+		tab->at_params.max_eager_freeze_failure_rate = max_eager_freeze_failure_rate;
 		tab->at_storage_param_vac_cost_limit = avopts ?
 			avopts->vacuum_cost_limit : 0;
 		tab->at_storage_param_vac_cost_delay = avopts ?
-- 
2.39.5 (Apple Git-154)


--QWBYbd5Ar5k8NvSv
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
	filename=v1-0003-autovac-combine-reloptions-correctly.patch



^ permalink  raw  reply  [nested|flat] 804+ messages in thread

* [PATCH v1 2/4] autovac: resolve relopts before vacuuming
@ 2025-06-23 19:42 Nathan Bossart <[email protected]>
  0 siblings, 0 replies; 804+ messages in thread

From: Nathan Bossart @ 2025-06-23 19:42 UTC (permalink / raw)

---
 src/backend/commands/vacuum.c       |  7 ++--
 src/backend/postmaster/autovacuum.c | 52 +++++++++++++++++++++--------
 2 files changed, 44 insertions(+), 15 deletions(-)

diff --git a/src/backend/commands/vacuum.c b/src/backend/commands/vacuum.c
index 33a33bf6b1c..0015b9ef4b0 100644
--- a/src/backend/commands/vacuum.c
+++ b/src/backend/commands/vacuum.c
@@ -421,7 +421,7 @@ ExecVacuum(ParseState *pstate, VacuumStmt *vacstmt, bool isTopLevel)
 	/*
 	 * Later, in vacuum_rel(), we check if a reloption override was specified.
 	 */
-	params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+	params.max_eager_freeze_failure_rate = -1.0;
 
 	/*
 	 * Create special memory context for cross-transaction storage.
@@ -2195,10 +2195,13 @@ vacuum_rel(Oid relid, RangeVar *relation, VacuumParams *params,
 	 * Check if the vacuum_max_eager_freeze_failure_rate table storage
 	 * parameter was specified. This overrides the GUC value.
 	 */
-	if (rel->rd_options != NULL &&
+	if (params->max_eager_freeze_failure_rate < 0 &&
+		rel->rd_options != NULL &&
 		((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate >= 0)
 		params->max_eager_freeze_failure_rate =
 			((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate;
+	else
+		params->max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
 
 	/*
 	 * Set truncate option based on truncate reloption or GUC if it wasn't
diff --git a/src/backend/postmaster/autovacuum.c b/src/backend/postmaster/autovacuum.c
index f86c9fed853..3bedca971ff 100644
--- a/src/backend/postmaster/autovacuum.c
+++ b/src/backend/postmaster/autovacuum.c
@@ -2758,6 +2758,9 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		int			multixact_freeze_table_age;
 		int			log_min_duration;
 		AutoVacOpts *avopts = (relopts ? &relopts->autovacuum : NULL);
+		VacOptValue index_cleanup;
+		VacOptValue truncate;
+		double		max_eager_freeze_failure_rate;
 
 		/*
 		 * Calculate the vacuum cost parameters and the freeze ages.  If there
@@ -2790,6 +2793,39 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			? avopts->multixact_freeze_table_age
 			: default_multixact_freeze_table_age;
 
+		if (relopts)
+		{
+			switch (relopts->vacuum_index_cleanup)
+			{
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_AUTO:
+					index_cleanup = VACOPTVALUE_AUTO;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_ON:
+					index_cleanup = VACOPTVALUE_ENABLED;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_OFF:
+					index_cleanup = VACOPTVALUE_DISABLED;
+					break;
+			}
+		}
+		else
+			index_cleanup = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_truncate_set)
+		{
+			if (relopts->vacuum_truncate)
+				truncate = VACOPTVALUE_ENABLED;
+			else
+				truncate = VACOPTVALUE_DISABLED;
+		}
+		else
+			truncate = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_max_eager_freeze_failure_rate >= 0)
+			max_eager_freeze_failure_rate = relopts->vacuum_max_eager_freeze_failure_rate;
+		else
+			max_eager_freeze_failure_rate = -1.0;
+
 		tab = palloc(sizeof(autovac_table));
 		tab->at_relid = relid;
 		tab->at_sharedrel = classForm->relisshared;
@@ -2806,13 +2842,8 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			(doanalyze ? VACOPT_ANALYZE : 0) |
 			(!wraparound ? VACOPT_SKIP_LOCKED : 0);
 
-		/*
-		 * index_cleanup and truncate are unspecified at first in autovacuum.
-		 * They will be filled in with usable values using their reloptions
-		 * (or reloption defaults) later.
-		 */
-		tab->at_params.index_cleanup = VACOPTVALUE_UNSPECIFIED;
-		tab->at_params.truncate = VACOPTVALUE_UNSPECIFIED;
+		tab->at_params.index_cleanup = index_cleanup;
+		tab->at_params.truncate = truncate;
 		/* As of now, we don't support parallel vacuum for autovacuum */
 		tab->at_params.nworkers = -1;
 		tab->at_params.freeze_min_age = freeze_min_age;
@@ -2822,12 +2853,7 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		tab->at_params.is_wraparound = wraparound;
 		tab->at_params.log_min_duration = log_min_duration;
 		tab->at_params.toast_parent = InvalidOid;
-
-		/*
-		 * Later, in vacuum_rel(), we check reloptions for any
-		 * vacuum_max_eager_freeze_failure_rate override.
-		 */
-		tab->at_params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+		tab->at_params.max_eager_freeze_failure_rate = max_eager_freeze_failure_rate;
 		tab->at_storage_param_vac_cost_limit = avopts ?
 			avopts->vacuum_cost_limit : 0;
 		tab->at_storage_param_vac_cost_delay = avopts ?
-- 
2.39.5 (Apple Git-154)


--QWBYbd5Ar5k8NvSv
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
	filename=v1-0003-autovac-combine-reloptions-correctly.patch



^ permalink  raw  reply  [nested|flat] 804+ messages in thread

* [PATCH v1 2/4] autovac: resolve relopts before vacuuming
@ 2025-06-23 19:42 Nathan Bossart <[email protected]>
  0 siblings, 0 replies; 804+ messages in thread

From: Nathan Bossart @ 2025-06-23 19:42 UTC (permalink / raw)

---
 src/backend/commands/vacuum.c       |  7 ++--
 src/backend/postmaster/autovacuum.c | 52 +++++++++++++++++++++--------
 2 files changed, 44 insertions(+), 15 deletions(-)

diff --git a/src/backend/commands/vacuum.c b/src/backend/commands/vacuum.c
index 33a33bf6b1c..0015b9ef4b0 100644
--- a/src/backend/commands/vacuum.c
+++ b/src/backend/commands/vacuum.c
@@ -421,7 +421,7 @@ ExecVacuum(ParseState *pstate, VacuumStmt *vacstmt, bool isTopLevel)
 	/*
 	 * Later, in vacuum_rel(), we check if a reloption override was specified.
 	 */
-	params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+	params.max_eager_freeze_failure_rate = -1.0;
 
 	/*
 	 * Create special memory context for cross-transaction storage.
@@ -2195,10 +2195,13 @@ vacuum_rel(Oid relid, RangeVar *relation, VacuumParams *params,
 	 * Check if the vacuum_max_eager_freeze_failure_rate table storage
 	 * parameter was specified. This overrides the GUC value.
 	 */
-	if (rel->rd_options != NULL &&
+	if (params->max_eager_freeze_failure_rate < 0 &&
+		rel->rd_options != NULL &&
 		((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate >= 0)
 		params->max_eager_freeze_failure_rate =
 			((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate;
+	else
+		params->max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
 
 	/*
 	 * Set truncate option based on truncate reloption or GUC if it wasn't
diff --git a/src/backend/postmaster/autovacuum.c b/src/backend/postmaster/autovacuum.c
index f86c9fed853..3bedca971ff 100644
--- a/src/backend/postmaster/autovacuum.c
+++ b/src/backend/postmaster/autovacuum.c
@@ -2758,6 +2758,9 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		int			multixact_freeze_table_age;
 		int			log_min_duration;
 		AutoVacOpts *avopts = (relopts ? &relopts->autovacuum : NULL);
+		VacOptValue index_cleanup;
+		VacOptValue truncate;
+		double		max_eager_freeze_failure_rate;
 
 		/*
 		 * Calculate the vacuum cost parameters and the freeze ages.  If there
@@ -2790,6 +2793,39 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			? avopts->multixact_freeze_table_age
 			: default_multixact_freeze_table_age;
 
+		if (relopts)
+		{
+			switch (relopts->vacuum_index_cleanup)
+			{
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_AUTO:
+					index_cleanup = VACOPTVALUE_AUTO;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_ON:
+					index_cleanup = VACOPTVALUE_ENABLED;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_OFF:
+					index_cleanup = VACOPTVALUE_DISABLED;
+					break;
+			}
+		}
+		else
+			index_cleanup = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_truncate_set)
+		{
+			if (relopts->vacuum_truncate)
+				truncate = VACOPTVALUE_ENABLED;
+			else
+				truncate = VACOPTVALUE_DISABLED;
+		}
+		else
+			truncate = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_max_eager_freeze_failure_rate >= 0)
+			max_eager_freeze_failure_rate = relopts->vacuum_max_eager_freeze_failure_rate;
+		else
+			max_eager_freeze_failure_rate = -1.0;
+
 		tab = palloc(sizeof(autovac_table));
 		tab->at_relid = relid;
 		tab->at_sharedrel = classForm->relisshared;
@@ -2806,13 +2842,8 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			(doanalyze ? VACOPT_ANALYZE : 0) |
 			(!wraparound ? VACOPT_SKIP_LOCKED : 0);
 
-		/*
-		 * index_cleanup and truncate are unspecified at first in autovacuum.
-		 * They will be filled in with usable values using their reloptions
-		 * (or reloption defaults) later.
-		 */
-		tab->at_params.index_cleanup = VACOPTVALUE_UNSPECIFIED;
-		tab->at_params.truncate = VACOPTVALUE_UNSPECIFIED;
+		tab->at_params.index_cleanup = index_cleanup;
+		tab->at_params.truncate = truncate;
 		/* As of now, we don't support parallel vacuum for autovacuum */
 		tab->at_params.nworkers = -1;
 		tab->at_params.freeze_min_age = freeze_min_age;
@@ -2822,12 +2853,7 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		tab->at_params.is_wraparound = wraparound;
 		tab->at_params.log_min_duration = log_min_duration;
 		tab->at_params.toast_parent = InvalidOid;
-
-		/*
-		 * Later, in vacuum_rel(), we check reloptions for any
-		 * vacuum_max_eager_freeze_failure_rate override.
-		 */
-		tab->at_params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+		tab->at_params.max_eager_freeze_failure_rate = max_eager_freeze_failure_rate;
 		tab->at_storage_param_vac_cost_limit = avopts ?
 			avopts->vacuum_cost_limit : 0;
 		tab->at_storage_param_vac_cost_delay = avopts ?
-- 
2.39.5 (Apple Git-154)


--QWBYbd5Ar5k8NvSv
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
	filename=v1-0003-autovac-combine-reloptions-correctly.patch



^ permalink  raw  reply  [nested|flat] 804+ messages in thread

* [PATCH v1 2/4] autovac: resolve relopts before vacuuming
@ 2025-06-23 19:42 Nathan Bossart <[email protected]>
  0 siblings, 0 replies; 804+ messages in thread

From: Nathan Bossart @ 2025-06-23 19:42 UTC (permalink / raw)

---
 src/backend/commands/vacuum.c       |  7 ++--
 src/backend/postmaster/autovacuum.c | 52 +++++++++++++++++++++--------
 2 files changed, 44 insertions(+), 15 deletions(-)

diff --git a/src/backend/commands/vacuum.c b/src/backend/commands/vacuum.c
index 33a33bf6b1c..0015b9ef4b0 100644
--- a/src/backend/commands/vacuum.c
+++ b/src/backend/commands/vacuum.c
@@ -421,7 +421,7 @@ ExecVacuum(ParseState *pstate, VacuumStmt *vacstmt, bool isTopLevel)
 	/*
 	 * Later, in vacuum_rel(), we check if a reloption override was specified.
 	 */
-	params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+	params.max_eager_freeze_failure_rate = -1.0;
 
 	/*
 	 * Create special memory context for cross-transaction storage.
@@ -2195,10 +2195,13 @@ vacuum_rel(Oid relid, RangeVar *relation, VacuumParams *params,
 	 * Check if the vacuum_max_eager_freeze_failure_rate table storage
 	 * parameter was specified. This overrides the GUC value.
 	 */
-	if (rel->rd_options != NULL &&
+	if (params->max_eager_freeze_failure_rate < 0 &&
+		rel->rd_options != NULL &&
 		((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate >= 0)
 		params->max_eager_freeze_failure_rate =
 			((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate;
+	else
+		params->max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
 
 	/*
 	 * Set truncate option based on truncate reloption or GUC if it wasn't
diff --git a/src/backend/postmaster/autovacuum.c b/src/backend/postmaster/autovacuum.c
index f86c9fed853..3bedca971ff 100644
--- a/src/backend/postmaster/autovacuum.c
+++ b/src/backend/postmaster/autovacuum.c
@@ -2758,6 +2758,9 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		int			multixact_freeze_table_age;
 		int			log_min_duration;
 		AutoVacOpts *avopts = (relopts ? &relopts->autovacuum : NULL);
+		VacOptValue index_cleanup;
+		VacOptValue truncate;
+		double		max_eager_freeze_failure_rate;
 
 		/*
 		 * Calculate the vacuum cost parameters and the freeze ages.  If there
@@ -2790,6 +2793,39 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			? avopts->multixact_freeze_table_age
 			: default_multixact_freeze_table_age;
 
+		if (relopts)
+		{
+			switch (relopts->vacuum_index_cleanup)
+			{
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_AUTO:
+					index_cleanup = VACOPTVALUE_AUTO;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_ON:
+					index_cleanup = VACOPTVALUE_ENABLED;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_OFF:
+					index_cleanup = VACOPTVALUE_DISABLED;
+					break;
+			}
+		}
+		else
+			index_cleanup = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_truncate_set)
+		{
+			if (relopts->vacuum_truncate)
+				truncate = VACOPTVALUE_ENABLED;
+			else
+				truncate = VACOPTVALUE_DISABLED;
+		}
+		else
+			truncate = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_max_eager_freeze_failure_rate >= 0)
+			max_eager_freeze_failure_rate = relopts->vacuum_max_eager_freeze_failure_rate;
+		else
+			max_eager_freeze_failure_rate = -1.0;
+
 		tab = palloc(sizeof(autovac_table));
 		tab->at_relid = relid;
 		tab->at_sharedrel = classForm->relisshared;
@@ -2806,13 +2842,8 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			(doanalyze ? VACOPT_ANALYZE : 0) |
 			(!wraparound ? VACOPT_SKIP_LOCKED : 0);
 
-		/*
-		 * index_cleanup and truncate are unspecified at first in autovacuum.
-		 * They will be filled in with usable values using their reloptions
-		 * (or reloption defaults) later.
-		 */
-		tab->at_params.index_cleanup = VACOPTVALUE_UNSPECIFIED;
-		tab->at_params.truncate = VACOPTVALUE_UNSPECIFIED;
+		tab->at_params.index_cleanup = index_cleanup;
+		tab->at_params.truncate = truncate;
 		/* As of now, we don't support parallel vacuum for autovacuum */
 		tab->at_params.nworkers = -1;
 		tab->at_params.freeze_min_age = freeze_min_age;
@@ -2822,12 +2853,7 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		tab->at_params.is_wraparound = wraparound;
 		tab->at_params.log_min_duration = log_min_duration;
 		tab->at_params.toast_parent = InvalidOid;
-
-		/*
-		 * Later, in vacuum_rel(), we check reloptions for any
-		 * vacuum_max_eager_freeze_failure_rate override.
-		 */
-		tab->at_params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+		tab->at_params.max_eager_freeze_failure_rate = max_eager_freeze_failure_rate;
 		tab->at_storage_param_vac_cost_limit = avopts ?
 			avopts->vacuum_cost_limit : 0;
 		tab->at_storage_param_vac_cost_delay = avopts ?
-- 
2.39.5 (Apple Git-154)


--QWBYbd5Ar5k8NvSv
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
	filename=v1-0003-autovac-combine-reloptions-correctly.patch



^ permalink  raw  reply  [nested|flat] 804+ messages in thread

* [PATCH v1 2/4] autovac: resolve relopts before vacuuming
@ 2025-06-23 19:42 Nathan Bossart <[email protected]>
  0 siblings, 0 replies; 804+ messages in thread

From: Nathan Bossart @ 2025-06-23 19:42 UTC (permalink / raw)

---
 src/backend/commands/vacuum.c       |  7 ++--
 src/backend/postmaster/autovacuum.c | 52 +++++++++++++++++++++--------
 2 files changed, 44 insertions(+), 15 deletions(-)

diff --git a/src/backend/commands/vacuum.c b/src/backend/commands/vacuum.c
index 33a33bf6b1c..0015b9ef4b0 100644
--- a/src/backend/commands/vacuum.c
+++ b/src/backend/commands/vacuum.c
@@ -421,7 +421,7 @@ ExecVacuum(ParseState *pstate, VacuumStmt *vacstmt, bool isTopLevel)
 	/*
 	 * Later, in vacuum_rel(), we check if a reloption override was specified.
 	 */
-	params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+	params.max_eager_freeze_failure_rate = -1.0;
 
 	/*
 	 * Create special memory context for cross-transaction storage.
@@ -2195,10 +2195,13 @@ vacuum_rel(Oid relid, RangeVar *relation, VacuumParams *params,
 	 * Check if the vacuum_max_eager_freeze_failure_rate table storage
 	 * parameter was specified. This overrides the GUC value.
 	 */
-	if (rel->rd_options != NULL &&
+	if (params->max_eager_freeze_failure_rate < 0 &&
+		rel->rd_options != NULL &&
 		((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate >= 0)
 		params->max_eager_freeze_failure_rate =
 			((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate;
+	else
+		params->max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
 
 	/*
 	 * Set truncate option based on truncate reloption or GUC if it wasn't
diff --git a/src/backend/postmaster/autovacuum.c b/src/backend/postmaster/autovacuum.c
index f86c9fed853..3bedca971ff 100644
--- a/src/backend/postmaster/autovacuum.c
+++ b/src/backend/postmaster/autovacuum.c
@@ -2758,6 +2758,9 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		int			multixact_freeze_table_age;
 		int			log_min_duration;
 		AutoVacOpts *avopts = (relopts ? &relopts->autovacuum : NULL);
+		VacOptValue index_cleanup;
+		VacOptValue truncate;
+		double		max_eager_freeze_failure_rate;
 
 		/*
 		 * Calculate the vacuum cost parameters and the freeze ages.  If there
@@ -2790,6 +2793,39 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			? avopts->multixact_freeze_table_age
 			: default_multixact_freeze_table_age;
 
+		if (relopts)
+		{
+			switch (relopts->vacuum_index_cleanup)
+			{
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_AUTO:
+					index_cleanup = VACOPTVALUE_AUTO;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_ON:
+					index_cleanup = VACOPTVALUE_ENABLED;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_OFF:
+					index_cleanup = VACOPTVALUE_DISABLED;
+					break;
+			}
+		}
+		else
+			index_cleanup = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_truncate_set)
+		{
+			if (relopts->vacuum_truncate)
+				truncate = VACOPTVALUE_ENABLED;
+			else
+				truncate = VACOPTVALUE_DISABLED;
+		}
+		else
+			truncate = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_max_eager_freeze_failure_rate >= 0)
+			max_eager_freeze_failure_rate = relopts->vacuum_max_eager_freeze_failure_rate;
+		else
+			max_eager_freeze_failure_rate = -1.0;
+
 		tab = palloc(sizeof(autovac_table));
 		tab->at_relid = relid;
 		tab->at_sharedrel = classForm->relisshared;
@@ -2806,13 +2842,8 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			(doanalyze ? VACOPT_ANALYZE : 0) |
 			(!wraparound ? VACOPT_SKIP_LOCKED : 0);
 
-		/*
-		 * index_cleanup and truncate are unspecified at first in autovacuum.
-		 * They will be filled in with usable values using their reloptions
-		 * (or reloption defaults) later.
-		 */
-		tab->at_params.index_cleanup = VACOPTVALUE_UNSPECIFIED;
-		tab->at_params.truncate = VACOPTVALUE_UNSPECIFIED;
+		tab->at_params.index_cleanup = index_cleanup;
+		tab->at_params.truncate = truncate;
 		/* As of now, we don't support parallel vacuum for autovacuum */
 		tab->at_params.nworkers = -1;
 		tab->at_params.freeze_min_age = freeze_min_age;
@@ -2822,12 +2853,7 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		tab->at_params.is_wraparound = wraparound;
 		tab->at_params.log_min_duration = log_min_duration;
 		tab->at_params.toast_parent = InvalidOid;
-
-		/*
-		 * Later, in vacuum_rel(), we check reloptions for any
-		 * vacuum_max_eager_freeze_failure_rate override.
-		 */
-		tab->at_params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+		tab->at_params.max_eager_freeze_failure_rate = max_eager_freeze_failure_rate;
 		tab->at_storage_param_vac_cost_limit = avopts ?
 			avopts->vacuum_cost_limit : 0;
 		tab->at_storage_param_vac_cost_delay = avopts ?
-- 
2.39.5 (Apple Git-154)


--QWBYbd5Ar5k8NvSv
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
	filename=v1-0003-autovac-combine-reloptions-correctly.patch



^ permalink  raw  reply  [nested|flat] 804+ messages in thread

* [PATCH v1 2/4] autovac: resolve relopts before vacuuming
@ 2025-06-23 19:42 Nathan Bossart <[email protected]>
  0 siblings, 0 replies; 804+ messages in thread

From: Nathan Bossart @ 2025-06-23 19:42 UTC (permalink / raw)

---
 src/backend/commands/vacuum.c       |  7 ++--
 src/backend/postmaster/autovacuum.c | 52 +++++++++++++++++++++--------
 2 files changed, 44 insertions(+), 15 deletions(-)

diff --git a/src/backend/commands/vacuum.c b/src/backend/commands/vacuum.c
index 33a33bf6b1c..0015b9ef4b0 100644
--- a/src/backend/commands/vacuum.c
+++ b/src/backend/commands/vacuum.c
@@ -421,7 +421,7 @@ ExecVacuum(ParseState *pstate, VacuumStmt *vacstmt, bool isTopLevel)
 	/*
 	 * Later, in vacuum_rel(), we check if a reloption override was specified.
 	 */
-	params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+	params.max_eager_freeze_failure_rate = -1.0;
 
 	/*
 	 * Create special memory context for cross-transaction storage.
@@ -2195,10 +2195,13 @@ vacuum_rel(Oid relid, RangeVar *relation, VacuumParams *params,
 	 * Check if the vacuum_max_eager_freeze_failure_rate table storage
 	 * parameter was specified. This overrides the GUC value.
 	 */
-	if (rel->rd_options != NULL &&
+	if (params->max_eager_freeze_failure_rate < 0 &&
+		rel->rd_options != NULL &&
 		((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate >= 0)
 		params->max_eager_freeze_failure_rate =
 			((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate;
+	else
+		params->max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
 
 	/*
 	 * Set truncate option based on truncate reloption or GUC if it wasn't
diff --git a/src/backend/postmaster/autovacuum.c b/src/backend/postmaster/autovacuum.c
index f86c9fed853..3bedca971ff 100644
--- a/src/backend/postmaster/autovacuum.c
+++ b/src/backend/postmaster/autovacuum.c
@@ -2758,6 +2758,9 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		int			multixact_freeze_table_age;
 		int			log_min_duration;
 		AutoVacOpts *avopts = (relopts ? &relopts->autovacuum : NULL);
+		VacOptValue index_cleanup;
+		VacOptValue truncate;
+		double		max_eager_freeze_failure_rate;
 
 		/*
 		 * Calculate the vacuum cost parameters and the freeze ages.  If there
@@ -2790,6 +2793,39 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			? avopts->multixact_freeze_table_age
 			: default_multixact_freeze_table_age;
 
+		if (relopts)
+		{
+			switch (relopts->vacuum_index_cleanup)
+			{
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_AUTO:
+					index_cleanup = VACOPTVALUE_AUTO;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_ON:
+					index_cleanup = VACOPTVALUE_ENABLED;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_OFF:
+					index_cleanup = VACOPTVALUE_DISABLED;
+					break;
+			}
+		}
+		else
+			index_cleanup = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_truncate_set)
+		{
+			if (relopts->vacuum_truncate)
+				truncate = VACOPTVALUE_ENABLED;
+			else
+				truncate = VACOPTVALUE_DISABLED;
+		}
+		else
+			truncate = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_max_eager_freeze_failure_rate >= 0)
+			max_eager_freeze_failure_rate = relopts->vacuum_max_eager_freeze_failure_rate;
+		else
+			max_eager_freeze_failure_rate = -1.0;
+
 		tab = palloc(sizeof(autovac_table));
 		tab->at_relid = relid;
 		tab->at_sharedrel = classForm->relisshared;
@@ -2806,13 +2842,8 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			(doanalyze ? VACOPT_ANALYZE : 0) |
 			(!wraparound ? VACOPT_SKIP_LOCKED : 0);
 
-		/*
-		 * index_cleanup and truncate are unspecified at first in autovacuum.
-		 * They will be filled in with usable values using their reloptions
-		 * (or reloption defaults) later.
-		 */
-		tab->at_params.index_cleanup = VACOPTVALUE_UNSPECIFIED;
-		tab->at_params.truncate = VACOPTVALUE_UNSPECIFIED;
+		tab->at_params.index_cleanup = index_cleanup;
+		tab->at_params.truncate = truncate;
 		/* As of now, we don't support parallel vacuum for autovacuum */
 		tab->at_params.nworkers = -1;
 		tab->at_params.freeze_min_age = freeze_min_age;
@@ -2822,12 +2853,7 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		tab->at_params.is_wraparound = wraparound;
 		tab->at_params.log_min_duration = log_min_duration;
 		tab->at_params.toast_parent = InvalidOid;
-
-		/*
-		 * Later, in vacuum_rel(), we check reloptions for any
-		 * vacuum_max_eager_freeze_failure_rate override.
-		 */
-		tab->at_params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+		tab->at_params.max_eager_freeze_failure_rate = max_eager_freeze_failure_rate;
 		tab->at_storage_param_vac_cost_limit = avopts ?
 			avopts->vacuum_cost_limit : 0;
 		tab->at_storage_param_vac_cost_delay = avopts ?
-- 
2.39.5 (Apple Git-154)


--QWBYbd5Ar5k8NvSv
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
	filename=v1-0003-autovac-combine-reloptions-correctly.patch



^ permalink  raw  reply  [nested|flat] 804+ messages in thread

* [PATCH v1 2/4] autovac: resolve relopts before vacuuming
@ 2025-06-23 19:42 Nathan Bossart <[email protected]>
  0 siblings, 0 replies; 804+ messages in thread

From: Nathan Bossart @ 2025-06-23 19:42 UTC (permalink / raw)

---
 src/backend/commands/vacuum.c       |  7 ++--
 src/backend/postmaster/autovacuum.c | 52 +++++++++++++++++++++--------
 2 files changed, 44 insertions(+), 15 deletions(-)

diff --git a/src/backend/commands/vacuum.c b/src/backend/commands/vacuum.c
index 33a33bf6b1c..0015b9ef4b0 100644
--- a/src/backend/commands/vacuum.c
+++ b/src/backend/commands/vacuum.c
@@ -421,7 +421,7 @@ ExecVacuum(ParseState *pstate, VacuumStmt *vacstmt, bool isTopLevel)
 	/*
 	 * Later, in vacuum_rel(), we check if a reloption override was specified.
 	 */
-	params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+	params.max_eager_freeze_failure_rate = -1.0;
 
 	/*
 	 * Create special memory context for cross-transaction storage.
@@ -2195,10 +2195,13 @@ vacuum_rel(Oid relid, RangeVar *relation, VacuumParams *params,
 	 * Check if the vacuum_max_eager_freeze_failure_rate table storage
 	 * parameter was specified. This overrides the GUC value.
 	 */
-	if (rel->rd_options != NULL &&
+	if (params->max_eager_freeze_failure_rate < 0 &&
+		rel->rd_options != NULL &&
 		((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate >= 0)
 		params->max_eager_freeze_failure_rate =
 			((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate;
+	else
+		params->max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
 
 	/*
 	 * Set truncate option based on truncate reloption or GUC if it wasn't
diff --git a/src/backend/postmaster/autovacuum.c b/src/backend/postmaster/autovacuum.c
index f86c9fed853..3bedca971ff 100644
--- a/src/backend/postmaster/autovacuum.c
+++ b/src/backend/postmaster/autovacuum.c
@@ -2758,6 +2758,9 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		int			multixact_freeze_table_age;
 		int			log_min_duration;
 		AutoVacOpts *avopts = (relopts ? &relopts->autovacuum : NULL);
+		VacOptValue index_cleanup;
+		VacOptValue truncate;
+		double		max_eager_freeze_failure_rate;
 
 		/*
 		 * Calculate the vacuum cost parameters and the freeze ages.  If there
@@ -2790,6 +2793,39 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			? avopts->multixact_freeze_table_age
 			: default_multixact_freeze_table_age;
 
+		if (relopts)
+		{
+			switch (relopts->vacuum_index_cleanup)
+			{
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_AUTO:
+					index_cleanup = VACOPTVALUE_AUTO;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_ON:
+					index_cleanup = VACOPTVALUE_ENABLED;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_OFF:
+					index_cleanup = VACOPTVALUE_DISABLED;
+					break;
+			}
+		}
+		else
+			index_cleanup = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_truncate_set)
+		{
+			if (relopts->vacuum_truncate)
+				truncate = VACOPTVALUE_ENABLED;
+			else
+				truncate = VACOPTVALUE_DISABLED;
+		}
+		else
+			truncate = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_max_eager_freeze_failure_rate >= 0)
+			max_eager_freeze_failure_rate = relopts->vacuum_max_eager_freeze_failure_rate;
+		else
+			max_eager_freeze_failure_rate = -1.0;
+
 		tab = palloc(sizeof(autovac_table));
 		tab->at_relid = relid;
 		tab->at_sharedrel = classForm->relisshared;
@@ -2806,13 +2842,8 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			(doanalyze ? VACOPT_ANALYZE : 0) |
 			(!wraparound ? VACOPT_SKIP_LOCKED : 0);
 
-		/*
-		 * index_cleanup and truncate are unspecified at first in autovacuum.
-		 * They will be filled in with usable values using their reloptions
-		 * (or reloption defaults) later.
-		 */
-		tab->at_params.index_cleanup = VACOPTVALUE_UNSPECIFIED;
-		tab->at_params.truncate = VACOPTVALUE_UNSPECIFIED;
+		tab->at_params.index_cleanup = index_cleanup;
+		tab->at_params.truncate = truncate;
 		/* As of now, we don't support parallel vacuum for autovacuum */
 		tab->at_params.nworkers = -1;
 		tab->at_params.freeze_min_age = freeze_min_age;
@@ -2822,12 +2853,7 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		tab->at_params.is_wraparound = wraparound;
 		tab->at_params.log_min_duration = log_min_duration;
 		tab->at_params.toast_parent = InvalidOid;
-
-		/*
-		 * Later, in vacuum_rel(), we check reloptions for any
-		 * vacuum_max_eager_freeze_failure_rate override.
-		 */
-		tab->at_params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+		tab->at_params.max_eager_freeze_failure_rate = max_eager_freeze_failure_rate;
 		tab->at_storage_param_vac_cost_limit = avopts ?
 			avopts->vacuum_cost_limit : 0;
 		tab->at_storage_param_vac_cost_delay = avopts ?
-- 
2.39.5 (Apple Git-154)


--QWBYbd5Ar5k8NvSv
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
	filename=v1-0003-autovac-combine-reloptions-correctly.patch



^ permalink  raw  reply  [nested|flat] 804+ messages in thread

* [PATCH v1 2/4] autovac: resolve relopts before vacuuming
@ 2025-06-23 19:42 Nathan Bossart <[email protected]>
  0 siblings, 0 replies; 804+ messages in thread

From: Nathan Bossart @ 2025-06-23 19:42 UTC (permalink / raw)

---
 src/backend/commands/vacuum.c       |  7 ++--
 src/backend/postmaster/autovacuum.c | 52 +++++++++++++++++++++--------
 2 files changed, 44 insertions(+), 15 deletions(-)

diff --git a/src/backend/commands/vacuum.c b/src/backend/commands/vacuum.c
index 33a33bf6b1c..0015b9ef4b0 100644
--- a/src/backend/commands/vacuum.c
+++ b/src/backend/commands/vacuum.c
@@ -421,7 +421,7 @@ ExecVacuum(ParseState *pstate, VacuumStmt *vacstmt, bool isTopLevel)
 	/*
 	 * Later, in vacuum_rel(), we check if a reloption override was specified.
 	 */
-	params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+	params.max_eager_freeze_failure_rate = -1.0;
 
 	/*
 	 * Create special memory context for cross-transaction storage.
@@ -2195,10 +2195,13 @@ vacuum_rel(Oid relid, RangeVar *relation, VacuumParams *params,
 	 * Check if the vacuum_max_eager_freeze_failure_rate table storage
 	 * parameter was specified. This overrides the GUC value.
 	 */
-	if (rel->rd_options != NULL &&
+	if (params->max_eager_freeze_failure_rate < 0 &&
+		rel->rd_options != NULL &&
 		((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate >= 0)
 		params->max_eager_freeze_failure_rate =
 			((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate;
+	else
+		params->max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
 
 	/*
 	 * Set truncate option based on truncate reloption or GUC if it wasn't
diff --git a/src/backend/postmaster/autovacuum.c b/src/backend/postmaster/autovacuum.c
index f86c9fed853..3bedca971ff 100644
--- a/src/backend/postmaster/autovacuum.c
+++ b/src/backend/postmaster/autovacuum.c
@@ -2758,6 +2758,9 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		int			multixact_freeze_table_age;
 		int			log_min_duration;
 		AutoVacOpts *avopts = (relopts ? &relopts->autovacuum : NULL);
+		VacOptValue index_cleanup;
+		VacOptValue truncate;
+		double		max_eager_freeze_failure_rate;
 
 		/*
 		 * Calculate the vacuum cost parameters and the freeze ages.  If there
@@ -2790,6 +2793,39 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			? avopts->multixact_freeze_table_age
 			: default_multixact_freeze_table_age;
 
+		if (relopts)
+		{
+			switch (relopts->vacuum_index_cleanup)
+			{
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_AUTO:
+					index_cleanup = VACOPTVALUE_AUTO;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_ON:
+					index_cleanup = VACOPTVALUE_ENABLED;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_OFF:
+					index_cleanup = VACOPTVALUE_DISABLED;
+					break;
+			}
+		}
+		else
+			index_cleanup = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_truncate_set)
+		{
+			if (relopts->vacuum_truncate)
+				truncate = VACOPTVALUE_ENABLED;
+			else
+				truncate = VACOPTVALUE_DISABLED;
+		}
+		else
+			truncate = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_max_eager_freeze_failure_rate >= 0)
+			max_eager_freeze_failure_rate = relopts->vacuum_max_eager_freeze_failure_rate;
+		else
+			max_eager_freeze_failure_rate = -1.0;
+
 		tab = palloc(sizeof(autovac_table));
 		tab->at_relid = relid;
 		tab->at_sharedrel = classForm->relisshared;
@@ -2806,13 +2842,8 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			(doanalyze ? VACOPT_ANALYZE : 0) |
 			(!wraparound ? VACOPT_SKIP_LOCKED : 0);
 
-		/*
-		 * index_cleanup and truncate are unspecified at first in autovacuum.
-		 * They will be filled in with usable values using their reloptions
-		 * (or reloption defaults) later.
-		 */
-		tab->at_params.index_cleanup = VACOPTVALUE_UNSPECIFIED;
-		tab->at_params.truncate = VACOPTVALUE_UNSPECIFIED;
+		tab->at_params.index_cleanup = index_cleanup;
+		tab->at_params.truncate = truncate;
 		/* As of now, we don't support parallel vacuum for autovacuum */
 		tab->at_params.nworkers = -1;
 		tab->at_params.freeze_min_age = freeze_min_age;
@@ -2822,12 +2853,7 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		tab->at_params.is_wraparound = wraparound;
 		tab->at_params.log_min_duration = log_min_duration;
 		tab->at_params.toast_parent = InvalidOid;
-
-		/*
-		 * Later, in vacuum_rel(), we check reloptions for any
-		 * vacuum_max_eager_freeze_failure_rate override.
-		 */
-		tab->at_params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+		tab->at_params.max_eager_freeze_failure_rate = max_eager_freeze_failure_rate;
 		tab->at_storage_param_vac_cost_limit = avopts ?
 			avopts->vacuum_cost_limit : 0;
 		tab->at_storage_param_vac_cost_delay = avopts ?
-- 
2.39.5 (Apple Git-154)


--QWBYbd5Ar5k8NvSv
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
	filename=v1-0003-autovac-combine-reloptions-correctly.patch



^ permalink  raw  reply  [nested|flat] 804+ messages in thread

* [PATCH v1 2/4] autovac: resolve relopts before vacuuming
@ 2025-06-23 19:42 Nathan Bossart <[email protected]>
  0 siblings, 0 replies; 804+ messages in thread

From: Nathan Bossart @ 2025-06-23 19:42 UTC (permalink / raw)

---
 src/backend/commands/vacuum.c       |  7 ++--
 src/backend/postmaster/autovacuum.c | 52 +++++++++++++++++++++--------
 2 files changed, 44 insertions(+), 15 deletions(-)

diff --git a/src/backend/commands/vacuum.c b/src/backend/commands/vacuum.c
index 33a33bf6b1c..0015b9ef4b0 100644
--- a/src/backend/commands/vacuum.c
+++ b/src/backend/commands/vacuum.c
@@ -421,7 +421,7 @@ ExecVacuum(ParseState *pstate, VacuumStmt *vacstmt, bool isTopLevel)
 	/*
 	 * Later, in vacuum_rel(), we check if a reloption override was specified.
 	 */
-	params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+	params.max_eager_freeze_failure_rate = -1.0;
 
 	/*
 	 * Create special memory context for cross-transaction storage.
@@ -2195,10 +2195,13 @@ vacuum_rel(Oid relid, RangeVar *relation, VacuumParams *params,
 	 * Check if the vacuum_max_eager_freeze_failure_rate table storage
 	 * parameter was specified. This overrides the GUC value.
 	 */
-	if (rel->rd_options != NULL &&
+	if (params->max_eager_freeze_failure_rate < 0 &&
+		rel->rd_options != NULL &&
 		((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate >= 0)
 		params->max_eager_freeze_failure_rate =
 			((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate;
+	else
+		params->max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
 
 	/*
 	 * Set truncate option based on truncate reloption or GUC if it wasn't
diff --git a/src/backend/postmaster/autovacuum.c b/src/backend/postmaster/autovacuum.c
index f86c9fed853..3bedca971ff 100644
--- a/src/backend/postmaster/autovacuum.c
+++ b/src/backend/postmaster/autovacuum.c
@@ -2758,6 +2758,9 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		int			multixact_freeze_table_age;
 		int			log_min_duration;
 		AutoVacOpts *avopts = (relopts ? &relopts->autovacuum : NULL);
+		VacOptValue index_cleanup;
+		VacOptValue truncate;
+		double		max_eager_freeze_failure_rate;
 
 		/*
 		 * Calculate the vacuum cost parameters and the freeze ages.  If there
@@ -2790,6 +2793,39 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			? avopts->multixact_freeze_table_age
 			: default_multixact_freeze_table_age;
 
+		if (relopts)
+		{
+			switch (relopts->vacuum_index_cleanup)
+			{
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_AUTO:
+					index_cleanup = VACOPTVALUE_AUTO;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_ON:
+					index_cleanup = VACOPTVALUE_ENABLED;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_OFF:
+					index_cleanup = VACOPTVALUE_DISABLED;
+					break;
+			}
+		}
+		else
+			index_cleanup = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_truncate_set)
+		{
+			if (relopts->vacuum_truncate)
+				truncate = VACOPTVALUE_ENABLED;
+			else
+				truncate = VACOPTVALUE_DISABLED;
+		}
+		else
+			truncate = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_max_eager_freeze_failure_rate >= 0)
+			max_eager_freeze_failure_rate = relopts->vacuum_max_eager_freeze_failure_rate;
+		else
+			max_eager_freeze_failure_rate = -1.0;
+
 		tab = palloc(sizeof(autovac_table));
 		tab->at_relid = relid;
 		tab->at_sharedrel = classForm->relisshared;
@@ -2806,13 +2842,8 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			(doanalyze ? VACOPT_ANALYZE : 0) |
 			(!wraparound ? VACOPT_SKIP_LOCKED : 0);
 
-		/*
-		 * index_cleanup and truncate are unspecified at first in autovacuum.
-		 * They will be filled in with usable values using their reloptions
-		 * (or reloption defaults) later.
-		 */
-		tab->at_params.index_cleanup = VACOPTVALUE_UNSPECIFIED;
-		tab->at_params.truncate = VACOPTVALUE_UNSPECIFIED;
+		tab->at_params.index_cleanup = index_cleanup;
+		tab->at_params.truncate = truncate;
 		/* As of now, we don't support parallel vacuum for autovacuum */
 		tab->at_params.nworkers = -1;
 		tab->at_params.freeze_min_age = freeze_min_age;
@@ -2822,12 +2853,7 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		tab->at_params.is_wraparound = wraparound;
 		tab->at_params.log_min_duration = log_min_duration;
 		tab->at_params.toast_parent = InvalidOid;
-
-		/*
-		 * Later, in vacuum_rel(), we check reloptions for any
-		 * vacuum_max_eager_freeze_failure_rate override.
-		 */
-		tab->at_params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+		tab->at_params.max_eager_freeze_failure_rate = max_eager_freeze_failure_rate;
 		tab->at_storage_param_vac_cost_limit = avopts ?
 			avopts->vacuum_cost_limit : 0;
 		tab->at_storage_param_vac_cost_delay = avopts ?
-- 
2.39.5 (Apple Git-154)


--QWBYbd5Ar5k8NvSv
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
	filename=v1-0003-autovac-combine-reloptions-correctly.patch



^ permalink  raw  reply  [nested|flat] 804+ messages in thread

* [PATCH v1 2/4] autovac: resolve relopts before vacuuming
@ 2025-06-23 19:42 Nathan Bossart <[email protected]>
  0 siblings, 0 replies; 804+ messages in thread

From: Nathan Bossart @ 2025-06-23 19:42 UTC (permalink / raw)

---
 src/backend/commands/vacuum.c       |  7 ++--
 src/backend/postmaster/autovacuum.c | 52 +++++++++++++++++++++--------
 2 files changed, 44 insertions(+), 15 deletions(-)

diff --git a/src/backend/commands/vacuum.c b/src/backend/commands/vacuum.c
index 33a33bf6b1c..0015b9ef4b0 100644
--- a/src/backend/commands/vacuum.c
+++ b/src/backend/commands/vacuum.c
@@ -421,7 +421,7 @@ ExecVacuum(ParseState *pstate, VacuumStmt *vacstmt, bool isTopLevel)
 	/*
 	 * Later, in vacuum_rel(), we check if a reloption override was specified.
 	 */
-	params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+	params.max_eager_freeze_failure_rate = -1.0;
 
 	/*
 	 * Create special memory context for cross-transaction storage.
@@ -2195,10 +2195,13 @@ vacuum_rel(Oid relid, RangeVar *relation, VacuumParams *params,
 	 * Check if the vacuum_max_eager_freeze_failure_rate table storage
 	 * parameter was specified. This overrides the GUC value.
 	 */
-	if (rel->rd_options != NULL &&
+	if (params->max_eager_freeze_failure_rate < 0 &&
+		rel->rd_options != NULL &&
 		((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate >= 0)
 		params->max_eager_freeze_failure_rate =
 			((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate;
+	else
+		params->max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
 
 	/*
 	 * Set truncate option based on truncate reloption or GUC if it wasn't
diff --git a/src/backend/postmaster/autovacuum.c b/src/backend/postmaster/autovacuum.c
index f86c9fed853..3bedca971ff 100644
--- a/src/backend/postmaster/autovacuum.c
+++ b/src/backend/postmaster/autovacuum.c
@@ -2758,6 +2758,9 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		int			multixact_freeze_table_age;
 		int			log_min_duration;
 		AutoVacOpts *avopts = (relopts ? &relopts->autovacuum : NULL);
+		VacOptValue index_cleanup;
+		VacOptValue truncate;
+		double		max_eager_freeze_failure_rate;
 
 		/*
 		 * Calculate the vacuum cost parameters and the freeze ages.  If there
@@ -2790,6 +2793,39 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			? avopts->multixact_freeze_table_age
 			: default_multixact_freeze_table_age;
 
+		if (relopts)
+		{
+			switch (relopts->vacuum_index_cleanup)
+			{
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_AUTO:
+					index_cleanup = VACOPTVALUE_AUTO;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_ON:
+					index_cleanup = VACOPTVALUE_ENABLED;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_OFF:
+					index_cleanup = VACOPTVALUE_DISABLED;
+					break;
+			}
+		}
+		else
+			index_cleanup = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_truncate_set)
+		{
+			if (relopts->vacuum_truncate)
+				truncate = VACOPTVALUE_ENABLED;
+			else
+				truncate = VACOPTVALUE_DISABLED;
+		}
+		else
+			truncate = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_max_eager_freeze_failure_rate >= 0)
+			max_eager_freeze_failure_rate = relopts->vacuum_max_eager_freeze_failure_rate;
+		else
+			max_eager_freeze_failure_rate = -1.0;
+
 		tab = palloc(sizeof(autovac_table));
 		tab->at_relid = relid;
 		tab->at_sharedrel = classForm->relisshared;
@@ -2806,13 +2842,8 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			(doanalyze ? VACOPT_ANALYZE : 0) |
 			(!wraparound ? VACOPT_SKIP_LOCKED : 0);
 
-		/*
-		 * index_cleanup and truncate are unspecified at first in autovacuum.
-		 * They will be filled in with usable values using their reloptions
-		 * (or reloption defaults) later.
-		 */
-		tab->at_params.index_cleanup = VACOPTVALUE_UNSPECIFIED;
-		tab->at_params.truncate = VACOPTVALUE_UNSPECIFIED;
+		tab->at_params.index_cleanup = index_cleanup;
+		tab->at_params.truncate = truncate;
 		/* As of now, we don't support parallel vacuum for autovacuum */
 		tab->at_params.nworkers = -1;
 		tab->at_params.freeze_min_age = freeze_min_age;
@@ -2822,12 +2853,7 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		tab->at_params.is_wraparound = wraparound;
 		tab->at_params.log_min_duration = log_min_duration;
 		tab->at_params.toast_parent = InvalidOid;
-
-		/*
-		 * Later, in vacuum_rel(), we check reloptions for any
-		 * vacuum_max_eager_freeze_failure_rate override.
-		 */
-		tab->at_params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+		tab->at_params.max_eager_freeze_failure_rate = max_eager_freeze_failure_rate;
 		tab->at_storage_param_vac_cost_limit = avopts ?
 			avopts->vacuum_cost_limit : 0;
 		tab->at_storage_param_vac_cost_delay = avopts ?
-- 
2.39.5 (Apple Git-154)


--QWBYbd5Ar5k8NvSv
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
	filename=v1-0003-autovac-combine-reloptions-correctly.patch



^ permalink  raw  reply  [nested|flat] 804+ messages in thread

* [PATCH v1 2/4] autovac: resolve relopts before vacuuming
@ 2025-06-23 19:42 Nathan Bossart <[email protected]>
  0 siblings, 0 replies; 804+ messages in thread

From: Nathan Bossart @ 2025-06-23 19:42 UTC (permalink / raw)

---
 src/backend/commands/vacuum.c       |  7 ++--
 src/backend/postmaster/autovacuum.c | 52 +++++++++++++++++++++--------
 2 files changed, 44 insertions(+), 15 deletions(-)

diff --git a/src/backend/commands/vacuum.c b/src/backend/commands/vacuum.c
index 33a33bf6b1c..0015b9ef4b0 100644
--- a/src/backend/commands/vacuum.c
+++ b/src/backend/commands/vacuum.c
@@ -421,7 +421,7 @@ ExecVacuum(ParseState *pstate, VacuumStmt *vacstmt, bool isTopLevel)
 	/*
 	 * Later, in vacuum_rel(), we check if a reloption override was specified.
 	 */
-	params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+	params.max_eager_freeze_failure_rate = -1.0;
 
 	/*
 	 * Create special memory context for cross-transaction storage.
@@ -2195,10 +2195,13 @@ vacuum_rel(Oid relid, RangeVar *relation, VacuumParams *params,
 	 * Check if the vacuum_max_eager_freeze_failure_rate table storage
 	 * parameter was specified. This overrides the GUC value.
 	 */
-	if (rel->rd_options != NULL &&
+	if (params->max_eager_freeze_failure_rate < 0 &&
+		rel->rd_options != NULL &&
 		((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate >= 0)
 		params->max_eager_freeze_failure_rate =
 			((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate;
+	else
+		params->max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
 
 	/*
 	 * Set truncate option based on truncate reloption or GUC if it wasn't
diff --git a/src/backend/postmaster/autovacuum.c b/src/backend/postmaster/autovacuum.c
index f86c9fed853..3bedca971ff 100644
--- a/src/backend/postmaster/autovacuum.c
+++ b/src/backend/postmaster/autovacuum.c
@@ -2758,6 +2758,9 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		int			multixact_freeze_table_age;
 		int			log_min_duration;
 		AutoVacOpts *avopts = (relopts ? &relopts->autovacuum : NULL);
+		VacOptValue index_cleanup;
+		VacOptValue truncate;
+		double		max_eager_freeze_failure_rate;
 
 		/*
 		 * Calculate the vacuum cost parameters and the freeze ages.  If there
@@ -2790,6 +2793,39 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			? avopts->multixact_freeze_table_age
 			: default_multixact_freeze_table_age;
 
+		if (relopts)
+		{
+			switch (relopts->vacuum_index_cleanup)
+			{
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_AUTO:
+					index_cleanup = VACOPTVALUE_AUTO;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_ON:
+					index_cleanup = VACOPTVALUE_ENABLED;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_OFF:
+					index_cleanup = VACOPTVALUE_DISABLED;
+					break;
+			}
+		}
+		else
+			index_cleanup = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_truncate_set)
+		{
+			if (relopts->vacuum_truncate)
+				truncate = VACOPTVALUE_ENABLED;
+			else
+				truncate = VACOPTVALUE_DISABLED;
+		}
+		else
+			truncate = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_max_eager_freeze_failure_rate >= 0)
+			max_eager_freeze_failure_rate = relopts->vacuum_max_eager_freeze_failure_rate;
+		else
+			max_eager_freeze_failure_rate = -1.0;
+
 		tab = palloc(sizeof(autovac_table));
 		tab->at_relid = relid;
 		tab->at_sharedrel = classForm->relisshared;
@@ -2806,13 +2842,8 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			(doanalyze ? VACOPT_ANALYZE : 0) |
 			(!wraparound ? VACOPT_SKIP_LOCKED : 0);
 
-		/*
-		 * index_cleanup and truncate are unspecified at first in autovacuum.
-		 * They will be filled in with usable values using their reloptions
-		 * (or reloption defaults) later.
-		 */
-		tab->at_params.index_cleanup = VACOPTVALUE_UNSPECIFIED;
-		tab->at_params.truncate = VACOPTVALUE_UNSPECIFIED;
+		tab->at_params.index_cleanup = index_cleanup;
+		tab->at_params.truncate = truncate;
 		/* As of now, we don't support parallel vacuum for autovacuum */
 		tab->at_params.nworkers = -1;
 		tab->at_params.freeze_min_age = freeze_min_age;
@@ -2822,12 +2853,7 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		tab->at_params.is_wraparound = wraparound;
 		tab->at_params.log_min_duration = log_min_duration;
 		tab->at_params.toast_parent = InvalidOid;
-
-		/*
-		 * Later, in vacuum_rel(), we check reloptions for any
-		 * vacuum_max_eager_freeze_failure_rate override.
-		 */
-		tab->at_params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+		tab->at_params.max_eager_freeze_failure_rate = max_eager_freeze_failure_rate;
 		tab->at_storage_param_vac_cost_limit = avopts ?
 			avopts->vacuum_cost_limit : 0;
 		tab->at_storage_param_vac_cost_delay = avopts ?
-- 
2.39.5 (Apple Git-154)


--QWBYbd5Ar5k8NvSv
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
	filename=v1-0003-autovac-combine-reloptions-correctly.patch



^ permalink  raw  reply  [nested|flat] 804+ messages in thread

* [PATCH v1 2/4] autovac: resolve relopts before vacuuming
@ 2025-06-23 19:42 Nathan Bossart <[email protected]>
  0 siblings, 0 replies; 804+ messages in thread

From: Nathan Bossart @ 2025-06-23 19:42 UTC (permalink / raw)

---
 src/backend/commands/vacuum.c       |  7 ++--
 src/backend/postmaster/autovacuum.c | 52 +++++++++++++++++++++--------
 2 files changed, 44 insertions(+), 15 deletions(-)

diff --git a/src/backend/commands/vacuum.c b/src/backend/commands/vacuum.c
index 33a33bf6b1c..0015b9ef4b0 100644
--- a/src/backend/commands/vacuum.c
+++ b/src/backend/commands/vacuum.c
@@ -421,7 +421,7 @@ ExecVacuum(ParseState *pstate, VacuumStmt *vacstmt, bool isTopLevel)
 	/*
 	 * Later, in vacuum_rel(), we check if a reloption override was specified.
 	 */
-	params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+	params.max_eager_freeze_failure_rate = -1.0;
 
 	/*
 	 * Create special memory context for cross-transaction storage.
@@ -2195,10 +2195,13 @@ vacuum_rel(Oid relid, RangeVar *relation, VacuumParams *params,
 	 * Check if the vacuum_max_eager_freeze_failure_rate table storage
 	 * parameter was specified. This overrides the GUC value.
 	 */
-	if (rel->rd_options != NULL &&
+	if (params->max_eager_freeze_failure_rate < 0 &&
+		rel->rd_options != NULL &&
 		((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate >= 0)
 		params->max_eager_freeze_failure_rate =
 			((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate;
+	else
+		params->max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
 
 	/*
 	 * Set truncate option based on truncate reloption or GUC if it wasn't
diff --git a/src/backend/postmaster/autovacuum.c b/src/backend/postmaster/autovacuum.c
index f86c9fed853..3bedca971ff 100644
--- a/src/backend/postmaster/autovacuum.c
+++ b/src/backend/postmaster/autovacuum.c
@@ -2758,6 +2758,9 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		int			multixact_freeze_table_age;
 		int			log_min_duration;
 		AutoVacOpts *avopts = (relopts ? &relopts->autovacuum : NULL);
+		VacOptValue index_cleanup;
+		VacOptValue truncate;
+		double		max_eager_freeze_failure_rate;
 
 		/*
 		 * Calculate the vacuum cost parameters and the freeze ages.  If there
@@ -2790,6 +2793,39 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			? avopts->multixact_freeze_table_age
 			: default_multixact_freeze_table_age;
 
+		if (relopts)
+		{
+			switch (relopts->vacuum_index_cleanup)
+			{
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_AUTO:
+					index_cleanup = VACOPTVALUE_AUTO;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_ON:
+					index_cleanup = VACOPTVALUE_ENABLED;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_OFF:
+					index_cleanup = VACOPTVALUE_DISABLED;
+					break;
+			}
+		}
+		else
+			index_cleanup = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_truncate_set)
+		{
+			if (relopts->vacuum_truncate)
+				truncate = VACOPTVALUE_ENABLED;
+			else
+				truncate = VACOPTVALUE_DISABLED;
+		}
+		else
+			truncate = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_max_eager_freeze_failure_rate >= 0)
+			max_eager_freeze_failure_rate = relopts->vacuum_max_eager_freeze_failure_rate;
+		else
+			max_eager_freeze_failure_rate = -1.0;
+
 		tab = palloc(sizeof(autovac_table));
 		tab->at_relid = relid;
 		tab->at_sharedrel = classForm->relisshared;
@@ -2806,13 +2842,8 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			(doanalyze ? VACOPT_ANALYZE : 0) |
 			(!wraparound ? VACOPT_SKIP_LOCKED : 0);
 
-		/*
-		 * index_cleanup and truncate are unspecified at first in autovacuum.
-		 * They will be filled in with usable values using their reloptions
-		 * (or reloption defaults) later.
-		 */
-		tab->at_params.index_cleanup = VACOPTVALUE_UNSPECIFIED;
-		tab->at_params.truncate = VACOPTVALUE_UNSPECIFIED;
+		tab->at_params.index_cleanup = index_cleanup;
+		tab->at_params.truncate = truncate;
 		/* As of now, we don't support parallel vacuum for autovacuum */
 		tab->at_params.nworkers = -1;
 		tab->at_params.freeze_min_age = freeze_min_age;
@@ -2822,12 +2853,7 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		tab->at_params.is_wraparound = wraparound;
 		tab->at_params.log_min_duration = log_min_duration;
 		tab->at_params.toast_parent = InvalidOid;
-
-		/*
-		 * Later, in vacuum_rel(), we check reloptions for any
-		 * vacuum_max_eager_freeze_failure_rate override.
-		 */
-		tab->at_params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+		tab->at_params.max_eager_freeze_failure_rate = max_eager_freeze_failure_rate;
 		tab->at_storage_param_vac_cost_limit = avopts ?
 			avopts->vacuum_cost_limit : 0;
 		tab->at_storage_param_vac_cost_delay = avopts ?
-- 
2.39.5 (Apple Git-154)


--QWBYbd5Ar5k8NvSv
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
	filename=v1-0003-autovac-combine-reloptions-correctly.patch



^ permalink  raw  reply  [nested|flat] 804+ messages in thread

* [PATCH v1 2/4] autovac: resolve relopts before vacuuming
@ 2025-06-23 19:42 Nathan Bossart <[email protected]>
  0 siblings, 0 replies; 804+ messages in thread

From: Nathan Bossart @ 2025-06-23 19:42 UTC (permalink / raw)

---
 src/backend/commands/vacuum.c       |  7 ++--
 src/backend/postmaster/autovacuum.c | 52 +++++++++++++++++++++--------
 2 files changed, 44 insertions(+), 15 deletions(-)

diff --git a/src/backend/commands/vacuum.c b/src/backend/commands/vacuum.c
index 33a33bf6b1c..0015b9ef4b0 100644
--- a/src/backend/commands/vacuum.c
+++ b/src/backend/commands/vacuum.c
@@ -421,7 +421,7 @@ ExecVacuum(ParseState *pstate, VacuumStmt *vacstmt, bool isTopLevel)
 	/*
 	 * Later, in vacuum_rel(), we check if a reloption override was specified.
 	 */
-	params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+	params.max_eager_freeze_failure_rate = -1.0;
 
 	/*
 	 * Create special memory context for cross-transaction storage.
@@ -2195,10 +2195,13 @@ vacuum_rel(Oid relid, RangeVar *relation, VacuumParams *params,
 	 * Check if the vacuum_max_eager_freeze_failure_rate table storage
 	 * parameter was specified. This overrides the GUC value.
 	 */
-	if (rel->rd_options != NULL &&
+	if (params->max_eager_freeze_failure_rate < 0 &&
+		rel->rd_options != NULL &&
 		((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate >= 0)
 		params->max_eager_freeze_failure_rate =
 			((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate;
+	else
+		params->max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
 
 	/*
 	 * Set truncate option based on truncate reloption or GUC if it wasn't
diff --git a/src/backend/postmaster/autovacuum.c b/src/backend/postmaster/autovacuum.c
index f86c9fed853..3bedca971ff 100644
--- a/src/backend/postmaster/autovacuum.c
+++ b/src/backend/postmaster/autovacuum.c
@@ -2758,6 +2758,9 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		int			multixact_freeze_table_age;
 		int			log_min_duration;
 		AutoVacOpts *avopts = (relopts ? &relopts->autovacuum : NULL);
+		VacOptValue index_cleanup;
+		VacOptValue truncate;
+		double		max_eager_freeze_failure_rate;
 
 		/*
 		 * Calculate the vacuum cost parameters and the freeze ages.  If there
@@ -2790,6 +2793,39 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			? avopts->multixact_freeze_table_age
 			: default_multixact_freeze_table_age;
 
+		if (relopts)
+		{
+			switch (relopts->vacuum_index_cleanup)
+			{
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_AUTO:
+					index_cleanup = VACOPTVALUE_AUTO;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_ON:
+					index_cleanup = VACOPTVALUE_ENABLED;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_OFF:
+					index_cleanup = VACOPTVALUE_DISABLED;
+					break;
+			}
+		}
+		else
+			index_cleanup = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_truncate_set)
+		{
+			if (relopts->vacuum_truncate)
+				truncate = VACOPTVALUE_ENABLED;
+			else
+				truncate = VACOPTVALUE_DISABLED;
+		}
+		else
+			truncate = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_max_eager_freeze_failure_rate >= 0)
+			max_eager_freeze_failure_rate = relopts->vacuum_max_eager_freeze_failure_rate;
+		else
+			max_eager_freeze_failure_rate = -1.0;
+
 		tab = palloc(sizeof(autovac_table));
 		tab->at_relid = relid;
 		tab->at_sharedrel = classForm->relisshared;
@@ -2806,13 +2842,8 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			(doanalyze ? VACOPT_ANALYZE : 0) |
 			(!wraparound ? VACOPT_SKIP_LOCKED : 0);
 
-		/*
-		 * index_cleanup and truncate are unspecified at first in autovacuum.
-		 * They will be filled in with usable values using their reloptions
-		 * (or reloption defaults) later.
-		 */
-		tab->at_params.index_cleanup = VACOPTVALUE_UNSPECIFIED;
-		tab->at_params.truncate = VACOPTVALUE_UNSPECIFIED;
+		tab->at_params.index_cleanup = index_cleanup;
+		tab->at_params.truncate = truncate;
 		/* As of now, we don't support parallel vacuum for autovacuum */
 		tab->at_params.nworkers = -1;
 		tab->at_params.freeze_min_age = freeze_min_age;
@@ -2822,12 +2853,7 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		tab->at_params.is_wraparound = wraparound;
 		tab->at_params.log_min_duration = log_min_duration;
 		tab->at_params.toast_parent = InvalidOid;
-
-		/*
-		 * Later, in vacuum_rel(), we check reloptions for any
-		 * vacuum_max_eager_freeze_failure_rate override.
-		 */
-		tab->at_params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+		tab->at_params.max_eager_freeze_failure_rate = max_eager_freeze_failure_rate;
 		tab->at_storage_param_vac_cost_limit = avopts ?
 			avopts->vacuum_cost_limit : 0;
 		tab->at_storage_param_vac_cost_delay = avopts ?
-- 
2.39.5 (Apple Git-154)


--QWBYbd5Ar5k8NvSv
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
	filename=v1-0003-autovac-combine-reloptions-correctly.patch



^ permalink  raw  reply  [nested|flat] 804+ messages in thread

* [PATCH v1 2/4] autovac: resolve relopts before vacuuming
@ 2025-06-23 19:42 Nathan Bossart <[email protected]>
  0 siblings, 0 replies; 804+ messages in thread

From: Nathan Bossart @ 2025-06-23 19:42 UTC (permalink / raw)

---
 src/backend/commands/vacuum.c       |  7 ++--
 src/backend/postmaster/autovacuum.c | 52 +++++++++++++++++++++--------
 2 files changed, 44 insertions(+), 15 deletions(-)

diff --git a/src/backend/commands/vacuum.c b/src/backend/commands/vacuum.c
index 33a33bf6b1c..0015b9ef4b0 100644
--- a/src/backend/commands/vacuum.c
+++ b/src/backend/commands/vacuum.c
@@ -421,7 +421,7 @@ ExecVacuum(ParseState *pstate, VacuumStmt *vacstmt, bool isTopLevel)
 	/*
 	 * Later, in vacuum_rel(), we check if a reloption override was specified.
 	 */
-	params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+	params.max_eager_freeze_failure_rate = -1.0;
 
 	/*
 	 * Create special memory context for cross-transaction storage.
@@ -2195,10 +2195,13 @@ vacuum_rel(Oid relid, RangeVar *relation, VacuumParams *params,
 	 * Check if the vacuum_max_eager_freeze_failure_rate table storage
 	 * parameter was specified. This overrides the GUC value.
 	 */
-	if (rel->rd_options != NULL &&
+	if (params->max_eager_freeze_failure_rate < 0 &&
+		rel->rd_options != NULL &&
 		((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate >= 0)
 		params->max_eager_freeze_failure_rate =
 			((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate;
+	else
+		params->max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
 
 	/*
 	 * Set truncate option based on truncate reloption or GUC if it wasn't
diff --git a/src/backend/postmaster/autovacuum.c b/src/backend/postmaster/autovacuum.c
index f86c9fed853..3bedca971ff 100644
--- a/src/backend/postmaster/autovacuum.c
+++ b/src/backend/postmaster/autovacuum.c
@@ -2758,6 +2758,9 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		int			multixact_freeze_table_age;
 		int			log_min_duration;
 		AutoVacOpts *avopts = (relopts ? &relopts->autovacuum : NULL);
+		VacOptValue index_cleanup;
+		VacOptValue truncate;
+		double		max_eager_freeze_failure_rate;
 
 		/*
 		 * Calculate the vacuum cost parameters and the freeze ages.  If there
@@ -2790,6 +2793,39 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			? avopts->multixact_freeze_table_age
 			: default_multixact_freeze_table_age;
 
+		if (relopts)
+		{
+			switch (relopts->vacuum_index_cleanup)
+			{
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_AUTO:
+					index_cleanup = VACOPTVALUE_AUTO;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_ON:
+					index_cleanup = VACOPTVALUE_ENABLED;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_OFF:
+					index_cleanup = VACOPTVALUE_DISABLED;
+					break;
+			}
+		}
+		else
+			index_cleanup = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_truncate_set)
+		{
+			if (relopts->vacuum_truncate)
+				truncate = VACOPTVALUE_ENABLED;
+			else
+				truncate = VACOPTVALUE_DISABLED;
+		}
+		else
+			truncate = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_max_eager_freeze_failure_rate >= 0)
+			max_eager_freeze_failure_rate = relopts->vacuum_max_eager_freeze_failure_rate;
+		else
+			max_eager_freeze_failure_rate = -1.0;
+
 		tab = palloc(sizeof(autovac_table));
 		tab->at_relid = relid;
 		tab->at_sharedrel = classForm->relisshared;
@@ -2806,13 +2842,8 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			(doanalyze ? VACOPT_ANALYZE : 0) |
 			(!wraparound ? VACOPT_SKIP_LOCKED : 0);
 
-		/*
-		 * index_cleanup and truncate are unspecified at first in autovacuum.
-		 * They will be filled in with usable values using their reloptions
-		 * (or reloption defaults) later.
-		 */
-		tab->at_params.index_cleanup = VACOPTVALUE_UNSPECIFIED;
-		tab->at_params.truncate = VACOPTVALUE_UNSPECIFIED;
+		tab->at_params.index_cleanup = index_cleanup;
+		tab->at_params.truncate = truncate;
 		/* As of now, we don't support parallel vacuum for autovacuum */
 		tab->at_params.nworkers = -1;
 		tab->at_params.freeze_min_age = freeze_min_age;
@@ -2822,12 +2853,7 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		tab->at_params.is_wraparound = wraparound;
 		tab->at_params.log_min_duration = log_min_duration;
 		tab->at_params.toast_parent = InvalidOid;
-
-		/*
-		 * Later, in vacuum_rel(), we check reloptions for any
-		 * vacuum_max_eager_freeze_failure_rate override.
-		 */
-		tab->at_params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+		tab->at_params.max_eager_freeze_failure_rate = max_eager_freeze_failure_rate;
 		tab->at_storage_param_vac_cost_limit = avopts ?
 			avopts->vacuum_cost_limit : 0;
 		tab->at_storage_param_vac_cost_delay = avopts ?
-- 
2.39.5 (Apple Git-154)


--QWBYbd5Ar5k8NvSv
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
	filename=v1-0003-autovac-combine-reloptions-correctly.patch



^ permalink  raw  reply  [nested|flat] 804+ messages in thread

* [PATCH v1 2/4] autovac: resolve relopts before vacuuming
@ 2025-06-23 19:42 Nathan Bossart <[email protected]>
  0 siblings, 0 replies; 804+ messages in thread

From: Nathan Bossart @ 2025-06-23 19:42 UTC (permalink / raw)

---
 src/backend/commands/vacuum.c       |  7 ++--
 src/backend/postmaster/autovacuum.c | 52 +++++++++++++++++++++--------
 2 files changed, 44 insertions(+), 15 deletions(-)

diff --git a/src/backend/commands/vacuum.c b/src/backend/commands/vacuum.c
index 33a33bf6b1c..0015b9ef4b0 100644
--- a/src/backend/commands/vacuum.c
+++ b/src/backend/commands/vacuum.c
@@ -421,7 +421,7 @@ ExecVacuum(ParseState *pstate, VacuumStmt *vacstmt, bool isTopLevel)
 	/*
 	 * Later, in vacuum_rel(), we check if a reloption override was specified.
 	 */
-	params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+	params.max_eager_freeze_failure_rate = -1.0;
 
 	/*
 	 * Create special memory context for cross-transaction storage.
@@ -2195,10 +2195,13 @@ vacuum_rel(Oid relid, RangeVar *relation, VacuumParams *params,
 	 * Check if the vacuum_max_eager_freeze_failure_rate table storage
 	 * parameter was specified. This overrides the GUC value.
 	 */
-	if (rel->rd_options != NULL &&
+	if (params->max_eager_freeze_failure_rate < 0 &&
+		rel->rd_options != NULL &&
 		((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate >= 0)
 		params->max_eager_freeze_failure_rate =
 			((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate;
+	else
+		params->max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
 
 	/*
 	 * Set truncate option based on truncate reloption or GUC if it wasn't
diff --git a/src/backend/postmaster/autovacuum.c b/src/backend/postmaster/autovacuum.c
index f86c9fed853..3bedca971ff 100644
--- a/src/backend/postmaster/autovacuum.c
+++ b/src/backend/postmaster/autovacuum.c
@@ -2758,6 +2758,9 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		int			multixact_freeze_table_age;
 		int			log_min_duration;
 		AutoVacOpts *avopts = (relopts ? &relopts->autovacuum : NULL);
+		VacOptValue index_cleanup;
+		VacOptValue truncate;
+		double		max_eager_freeze_failure_rate;
 
 		/*
 		 * Calculate the vacuum cost parameters and the freeze ages.  If there
@@ -2790,6 +2793,39 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			? avopts->multixact_freeze_table_age
 			: default_multixact_freeze_table_age;
 
+		if (relopts)
+		{
+			switch (relopts->vacuum_index_cleanup)
+			{
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_AUTO:
+					index_cleanup = VACOPTVALUE_AUTO;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_ON:
+					index_cleanup = VACOPTVALUE_ENABLED;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_OFF:
+					index_cleanup = VACOPTVALUE_DISABLED;
+					break;
+			}
+		}
+		else
+			index_cleanup = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_truncate_set)
+		{
+			if (relopts->vacuum_truncate)
+				truncate = VACOPTVALUE_ENABLED;
+			else
+				truncate = VACOPTVALUE_DISABLED;
+		}
+		else
+			truncate = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_max_eager_freeze_failure_rate >= 0)
+			max_eager_freeze_failure_rate = relopts->vacuum_max_eager_freeze_failure_rate;
+		else
+			max_eager_freeze_failure_rate = -1.0;
+
 		tab = palloc(sizeof(autovac_table));
 		tab->at_relid = relid;
 		tab->at_sharedrel = classForm->relisshared;
@@ -2806,13 +2842,8 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			(doanalyze ? VACOPT_ANALYZE : 0) |
 			(!wraparound ? VACOPT_SKIP_LOCKED : 0);
 
-		/*
-		 * index_cleanup and truncate are unspecified at first in autovacuum.
-		 * They will be filled in with usable values using their reloptions
-		 * (or reloption defaults) later.
-		 */
-		tab->at_params.index_cleanup = VACOPTVALUE_UNSPECIFIED;
-		tab->at_params.truncate = VACOPTVALUE_UNSPECIFIED;
+		tab->at_params.index_cleanup = index_cleanup;
+		tab->at_params.truncate = truncate;
 		/* As of now, we don't support parallel vacuum for autovacuum */
 		tab->at_params.nworkers = -1;
 		tab->at_params.freeze_min_age = freeze_min_age;
@@ -2822,12 +2853,7 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		tab->at_params.is_wraparound = wraparound;
 		tab->at_params.log_min_duration = log_min_duration;
 		tab->at_params.toast_parent = InvalidOid;
-
-		/*
-		 * Later, in vacuum_rel(), we check reloptions for any
-		 * vacuum_max_eager_freeze_failure_rate override.
-		 */
-		tab->at_params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+		tab->at_params.max_eager_freeze_failure_rate = max_eager_freeze_failure_rate;
 		tab->at_storage_param_vac_cost_limit = avopts ?
 			avopts->vacuum_cost_limit : 0;
 		tab->at_storage_param_vac_cost_delay = avopts ?
-- 
2.39.5 (Apple Git-154)


--QWBYbd5Ar5k8NvSv
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
	filename=v1-0003-autovac-combine-reloptions-correctly.patch



^ permalink  raw  reply  [nested|flat] 804+ messages in thread

* [PATCH v1 2/4] autovac: resolve relopts before vacuuming
@ 2025-06-23 19:42 Nathan Bossart <[email protected]>
  0 siblings, 0 replies; 804+ messages in thread

From: Nathan Bossart @ 2025-06-23 19:42 UTC (permalink / raw)

---
 src/backend/commands/vacuum.c       |  7 ++--
 src/backend/postmaster/autovacuum.c | 52 +++++++++++++++++++++--------
 2 files changed, 44 insertions(+), 15 deletions(-)

diff --git a/src/backend/commands/vacuum.c b/src/backend/commands/vacuum.c
index 33a33bf6b1c..0015b9ef4b0 100644
--- a/src/backend/commands/vacuum.c
+++ b/src/backend/commands/vacuum.c
@@ -421,7 +421,7 @@ ExecVacuum(ParseState *pstate, VacuumStmt *vacstmt, bool isTopLevel)
 	/*
 	 * Later, in vacuum_rel(), we check if a reloption override was specified.
 	 */
-	params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+	params.max_eager_freeze_failure_rate = -1.0;
 
 	/*
 	 * Create special memory context for cross-transaction storage.
@@ -2195,10 +2195,13 @@ vacuum_rel(Oid relid, RangeVar *relation, VacuumParams *params,
 	 * Check if the vacuum_max_eager_freeze_failure_rate table storage
 	 * parameter was specified. This overrides the GUC value.
 	 */
-	if (rel->rd_options != NULL &&
+	if (params->max_eager_freeze_failure_rate < 0 &&
+		rel->rd_options != NULL &&
 		((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate >= 0)
 		params->max_eager_freeze_failure_rate =
 			((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate;
+	else
+		params->max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
 
 	/*
 	 * Set truncate option based on truncate reloption or GUC if it wasn't
diff --git a/src/backend/postmaster/autovacuum.c b/src/backend/postmaster/autovacuum.c
index f86c9fed853..3bedca971ff 100644
--- a/src/backend/postmaster/autovacuum.c
+++ b/src/backend/postmaster/autovacuum.c
@@ -2758,6 +2758,9 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		int			multixact_freeze_table_age;
 		int			log_min_duration;
 		AutoVacOpts *avopts = (relopts ? &relopts->autovacuum : NULL);
+		VacOptValue index_cleanup;
+		VacOptValue truncate;
+		double		max_eager_freeze_failure_rate;
 
 		/*
 		 * Calculate the vacuum cost parameters and the freeze ages.  If there
@@ -2790,6 +2793,39 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			? avopts->multixact_freeze_table_age
 			: default_multixact_freeze_table_age;
 
+		if (relopts)
+		{
+			switch (relopts->vacuum_index_cleanup)
+			{
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_AUTO:
+					index_cleanup = VACOPTVALUE_AUTO;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_ON:
+					index_cleanup = VACOPTVALUE_ENABLED;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_OFF:
+					index_cleanup = VACOPTVALUE_DISABLED;
+					break;
+			}
+		}
+		else
+			index_cleanup = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_truncate_set)
+		{
+			if (relopts->vacuum_truncate)
+				truncate = VACOPTVALUE_ENABLED;
+			else
+				truncate = VACOPTVALUE_DISABLED;
+		}
+		else
+			truncate = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_max_eager_freeze_failure_rate >= 0)
+			max_eager_freeze_failure_rate = relopts->vacuum_max_eager_freeze_failure_rate;
+		else
+			max_eager_freeze_failure_rate = -1.0;
+
 		tab = palloc(sizeof(autovac_table));
 		tab->at_relid = relid;
 		tab->at_sharedrel = classForm->relisshared;
@@ -2806,13 +2842,8 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			(doanalyze ? VACOPT_ANALYZE : 0) |
 			(!wraparound ? VACOPT_SKIP_LOCKED : 0);
 
-		/*
-		 * index_cleanup and truncate are unspecified at first in autovacuum.
-		 * They will be filled in with usable values using their reloptions
-		 * (or reloption defaults) later.
-		 */
-		tab->at_params.index_cleanup = VACOPTVALUE_UNSPECIFIED;
-		tab->at_params.truncate = VACOPTVALUE_UNSPECIFIED;
+		tab->at_params.index_cleanup = index_cleanup;
+		tab->at_params.truncate = truncate;
 		/* As of now, we don't support parallel vacuum for autovacuum */
 		tab->at_params.nworkers = -1;
 		tab->at_params.freeze_min_age = freeze_min_age;
@@ -2822,12 +2853,7 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		tab->at_params.is_wraparound = wraparound;
 		tab->at_params.log_min_duration = log_min_duration;
 		tab->at_params.toast_parent = InvalidOid;
-
-		/*
-		 * Later, in vacuum_rel(), we check reloptions for any
-		 * vacuum_max_eager_freeze_failure_rate override.
-		 */
-		tab->at_params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+		tab->at_params.max_eager_freeze_failure_rate = max_eager_freeze_failure_rate;
 		tab->at_storage_param_vac_cost_limit = avopts ?
 			avopts->vacuum_cost_limit : 0;
 		tab->at_storage_param_vac_cost_delay = avopts ?
-- 
2.39.5 (Apple Git-154)


--QWBYbd5Ar5k8NvSv
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
	filename=v1-0003-autovac-combine-reloptions-correctly.patch



^ permalink  raw  reply  [nested|flat] 804+ messages in thread

* [PATCH v1 2/4] autovac: resolve relopts before vacuuming
@ 2025-06-23 19:42 Nathan Bossart <[email protected]>
  0 siblings, 0 replies; 804+ messages in thread

From: Nathan Bossart @ 2025-06-23 19:42 UTC (permalink / raw)

---
 src/backend/commands/vacuum.c       |  7 ++--
 src/backend/postmaster/autovacuum.c | 52 +++++++++++++++++++++--------
 2 files changed, 44 insertions(+), 15 deletions(-)

diff --git a/src/backend/commands/vacuum.c b/src/backend/commands/vacuum.c
index 33a33bf6b1c..0015b9ef4b0 100644
--- a/src/backend/commands/vacuum.c
+++ b/src/backend/commands/vacuum.c
@@ -421,7 +421,7 @@ ExecVacuum(ParseState *pstate, VacuumStmt *vacstmt, bool isTopLevel)
 	/*
 	 * Later, in vacuum_rel(), we check if a reloption override was specified.
 	 */
-	params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+	params.max_eager_freeze_failure_rate = -1.0;
 
 	/*
 	 * Create special memory context for cross-transaction storage.
@@ -2195,10 +2195,13 @@ vacuum_rel(Oid relid, RangeVar *relation, VacuumParams *params,
 	 * Check if the vacuum_max_eager_freeze_failure_rate table storage
 	 * parameter was specified. This overrides the GUC value.
 	 */
-	if (rel->rd_options != NULL &&
+	if (params->max_eager_freeze_failure_rate < 0 &&
+		rel->rd_options != NULL &&
 		((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate >= 0)
 		params->max_eager_freeze_failure_rate =
 			((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate;
+	else
+		params->max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
 
 	/*
 	 * Set truncate option based on truncate reloption or GUC if it wasn't
diff --git a/src/backend/postmaster/autovacuum.c b/src/backend/postmaster/autovacuum.c
index f86c9fed853..3bedca971ff 100644
--- a/src/backend/postmaster/autovacuum.c
+++ b/src/backend/postmaster/autovacuum.c
@@ -2758,6 +2758,9 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		int			multixact_freeze_table_age;
 		int			log_min_duration;
 		AutoVacOpts *avopts = (relopts ? &relopts->autovacuum : NULL);
+		VacOptValue index_cleanup;
+		VacOptValue truncate;
+		double		max_eager_freeze_failure_rate;
 
 		/*
 		 * Calculate the vacuum cost parameters and the freeze ages.  If there
@@ -2790,6 +2793,39 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			? avopts->multixact_freeze_table_age
 			: default_multixact_freeze_table_age;
 
+		if (relopts)
+		{
+			switch (relopts->vacuum_index_cleanup)
+			{
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_AUTO:
+					index_cleanup = VACOPTVALUE_AUTO;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_ON:
+					index_cleanup = VACOPTVALUE_ENABLED;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_OFF:
+					index_cleanup = VACOPTVALUE_DISABLED;
+					break;
+			}
+		}
+		else
+			index_cleanup = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_truncate_set)
+		{
+			if (relopts->vacuum_truncate)
+				truncate = VACOPTVALUE_ENABLED;
+			else
+				truncate = VACOPTVALUE_DISABLED;
+		}
+		else
+			truncate = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_max_eager_freeze_failure_rate >= 0)
+			max_eager_freeze_failure_rate = relopts->vacuum_max_eager_freeze_failure_rate;
+		else
+			max_eager_freeze_failure_rate = -1.0;
+
 		tab = palloc(sizeof(autovac_table));
 		tab->at_relid = relid;
 		tab->at_sharedrel = classForm->relisshared;
@@ -2806,13 +2842,8 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			(doanalyze ? VACOPT_ANALYZE : 0) |
 			(!wraparound ? VACOPT_SKIP_LOCKED : 0);
 
-		/*
-		 * index_cleanup and truncate are unspecified at first in autovacuum.
-		 * They will be filled in with usable values using their reloptions
-		 * (or reloption defaults) later.
-		 */
-		tab->at_params.index_cleanup = VACOPTVALUE_UNSPECIFIED;
-		tab->at_params.truncate = VACOPTVALUE_UNSPECIFIED;
+		tab->at_params.index_cleanup = index_cleanup;
+		tab->at_params.truncate = truncate;
 		/* As of now, we don't support parallel vacuum for autovacuum */
 		tab->at_params.nworkers = -1;
 		tab->at_params.freeze_min_age = freeze_min_age;
@@ -2822,12 +2853,7 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		tab->at_params.is_wraparound = wraparound;
 		tab->at_params.log_min_duration = log_min_duration;
 		tab->at_params.toast_parent = InvalidOid;
-
-		/*
-		 * Later, in vacuum_rel(), we check reloptions for any
-		 * vacuum_max_eager_freeze_failure_rate override.
-		 */
-		tab->at_params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+		tab->at_params.max_eager_freeze_failure_rate = max_eager_freeze_failure_rate;
 		tab->at_storage_param_vac_cost_limit = avopts ?
 			avopts->vacuum_cost_limit : 0;
 		tab->at_storage_param_vac_cost_delay = avopts ?
-- 
2.39.5 (Apple Git-154)


--QWBYbd5Ar5k8NvSv
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
	filename=v1-0003-autovac-combine-reloptions-correctly.patch



^ permalink  raw  reply  [nested|flat] 804+ messages in thread

* [PATCH v1 2/4] autovac: resolve relopts before vacuuming
@ 2025-06-23 19:42 Nathan Bossart <[email protected]>
  0 siblings, 0 replies; 804+ messages in thread

From: Nathan Bossart @ 2025-06-23 19:42 UTC (permalink / raw)

---
 src/backend/commands/vacuum.c       |  7 ++--
 src/backend/postmaster/autovacuum.c | 52 +++++++++++++++++++++--------
 2 files changed, 44 insertions(+), 15 deletions(-)

diff --git a/src/backend/commands/vacuum.c b/src/backend/commands/vacuum.c
index 33a33bf6b1c..0015b9ef4b0 100644
--- a/src/backend/commands/vacuum.c
+++ b/src/backend/commands/vacuum.c
@@ -421,7 +421,7 @@ ExecVacuum(ParseState *pstate, VacuumStmt *vacstmt, bool isTopLevel)
 	/*
 	 * Later, in vacuum_rel(), we check if a reloption override was specified.
 	 */
-	params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+	params.max_eager_freeze_failure_rate = -1.0;
 
 	/*
 	 * Create special memory context for cross-transaction storage.
@@ -2195,10 +2195,13 @@ vacuum_rel(Oid relid, RangeVar *relation, VacuumParams *params,
 	 * Check if the vacuum_max_eager_freeze_failure_rate table storage
 	 * parameter was specified. This overrides the GUC value.
 	 */
-	if (rel->rd_options != NULL &&
+	if (params->max_eager_freeze_failure_rate < 0 &&
+		rel->rd_options != NULL &&
 		((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate >= 0)
 		params->max_eager_freeze_failure_rate =
 			((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate;
+	else
+		params->max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
 
 	/*
 	 * Set truncate option based on truncate reloption or GUC if it wasn't
diff --git a/src/backend/postmaster/autovacuum.c b/src/backend/postmaster/autovacuum.c
index f86c9fed853..3bedca971ff 100644
--- a/src/backend/postmaster/autovacuum.c
+++ b/src/backend/postmaster/autovacuum.c
@@ -2758,6 +2758,9 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		int			multixact_freeze_table_age;
 		int			log_min_duration;
 		AutoVacOpts *avopts = (relopts ? &relopts->autovacuum : NULL);
+		VacOptValue index_cleanup;
+		VacOptValue truncate;
+		double		max_eager_freeze_failure_rate;
 
 		/*
 		 * Calculate the vacuum cost parameters and the freeze ages.  If there
@@ -2790,6 +2793,39 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			? avopts->multixact_freeze_table_age
 			: default_multixact_freeze_table_age;
 
+		if (relopts)
+		{
+			switch (relopts->vacuum_index_cleanup)
+			{
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_AUTO:
+					index_cleanup = VACOPTVALUE_AUTO;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_ON:
+					index_cleanup = VACOPTVALUE_ENABLED;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_OFF:
+					index_cleanup = VACOPTVALUE_DISABLED;
+					break;
+			}
+		}
+		else
+			index_cleanup = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_truncate_set)
+		{
+			if (relopts->vacuum_truncate)
+				truncate = VACOPTVALUE_ENABLED;
+			else
+				truncate = VACOPTVALUE_DISABLED;
+		}
+		else
+			truncate = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_max_eager_freeze_failure_rate >= 0)
+			max_eager_freeze_failure_rate = relopts->vacuum_max_eager_freeze_failure_rate;
+		else
+			max_eager_freeze_failure_rate = -1.0;
+
 		tab = palloc(sizeof(autovac_table));
 		tab->at_relid = relid;
 		tab->at_sharedrel = classForm->relisshared;
@@ -2806,13 +2842,8 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			(doanalyze ? VACOPT_ANALYZE : 0) |
 			(!wraparound ? VACOPT_SKIP_LOCKED : 0);
 
-		/*
-		 * index_cleanup and truncate are unspecified at first in autovacuum.
-		 * They will be filled in with usable values using their reloptions
-		 * (or reloption defaults) later.
-		 */
-		tab->at_params.index_cleanup = VACOPTVALUE_UNSPECIFIED;
-		tab->at_params.truncate = VACOPTVALUE_UNSPECIFIED;
+		tab->at_params.index_cleanup = index_cleanup;
+		tab->at_params.truncate = truncate;
 		/* As of now, we don't support parallel vacuum for autovacuum */
 		tab->at_params.nworkers = -1;
 		tab->at_params.freeze_min_age = freeze_min_age;
@@ -2822,12 +2853,7 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		tab->at_params.is_wraparound = wraparound;
 		tab->at_params.log_min_duration = log_min_duration;
 		tab->at_params.toast_parent = InvalidOid;
-
-		/*
-		 * Later, in vacuum_rel(), we check reloptions for any
-		 * vacuum_max_eager_freeze_failure_rate override.
-		 */
-		tab->at_params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+		tab->at_params.max_eager_freeze_failure_rate = max_eager_freeze_failure_rate;
 		tab->at_storage_param_vac_cost_limit = avopts ?
 			avopts->vacuum_cost_limit : 0;
 		tab->at_storage_param_vac_cost_delay = avopts ?
-- 
2.39.5 (Apple Git-154)


--QWBYbd5Ar5k8NvSv
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
	filename=v1-0003-autovac-combine-reloptions-correctly.patch



^ permalink  raw  reply  [nested|flat] 804+ messages in thread

* [PATCH v1 2/4] autovac: resolve relopts before vacuuming
@ 2025-06-23 19:42 Nathan Bossart <[email protected]>
  0 siblings, 0 replies; 804+ messages in thread

From: Nathan Bossart @ 2025-06-23 19:42 UTC (permalink / raw)

---
 src/backend/commands/vacuum.c       |  7 ++--
 src/backend/postmaster/autovacuum.c | 52 +++++++++++++++++++++--------
 2 files changed, 44 insertions(+), 15 deletions(-)

diff --git a/src/backend/commands/vacuum.c b/src/backend/commands/vacuum.c
index 33a33bf6b1c..0015b9ef4b0 100644
--- a/src/backend/commands/vacuum.c
+++ b/src/backend/commands/vacuum.c
@@ -421,7 +421,7 @@ ExecVacuum(ParseState *pstate, VacuumStmt *vacstmt, bool isTopLevel)
 	/*
 	 * Later, in vacuum_rel(), we check if a reloption override was specified.
 	 */
-	params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+	params.max_eager_freeze_failure_rate = -1.0;
 
 	/*
 	 * Create special memory context for cross-transaction storage.
@@ -2195,10 +2195,13 @@ vacuum_rel(Oid relid, RangeVar *relation, VacuumParams *params,
 	 * Check if the vacuum_max_eager_freeze_failure_rate table storage
 	 * parameter was specified. This overrides the GUC value.
 	 */
-	if (rel->rd_options != NULL &&
+	if (params->max_eager_freeze_failure_rate < 0 &&
+		rel->rd_options != NULL &&
 		((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate >= 0)
 		params->max_eager_freeze_failure_rate =
 			((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate;
+	else
+		params->max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
 
 	/*
 	 * Set truncate option based on truncate reloption or GUC if it wasn't
diff --git a/src/backend/postmaster/autovacuum.c b/src/backend/postmaster/autovacuum.c
index f86c9fed853..3bedca971ff 100644
--- a/src/backend/postmaster/autovacuum.c
+++ b/src/backend/postmaster/autovacuum.c
@@ -2758,6 +2758,9 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		int			multixact_freeze_table_age;
 		int			log_min_duration;
 		AutoVacOpts *avopts = (relopts ? &relopts->autovacuum : NULL);
+		VacOptValue index_cleanup;
+		VacOptValue truncate;
+		double		max_eager_freeze_failure_rate;
 
 		/*
 		 * Calculate the vacuum cost parameters and the freeze ages.  If there
@@ -2790,6 +2793,39 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			? avopts->multixact_freeze_table_age
 			: default_multixact_freeze_table_age;
 
+		if (relopts)
+		{
+			switch (relopts->vacuum_index_cleanup)
+			{
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_AUTO:
+					index_cleanup = VACOPTVALUE_AUTO;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_ON:
+					index_cleanup = VACOPTVALUE_ENABLED;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_OFF:
+					index_cleanup = VACOPTVALUE_DISABLED;
+					break;
+			}
+		}
+		else
+			index_cleanup = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_truncate_set)
+		{
+			if (relopts->vacuum_truncate)
+				truncate = VACOPTVALUE_ENABLED;
+			else
+				truncate = VACOPTVALUE_DISABLED;
+		}
+		else
+			truncate = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_max_eager_freeze_failure_rate >= 0)
+			max_eager_freeze_failure_rate = relopts->vacuum_max_eager_freeze_failure_rate;
+		else
+			max_eager_freeze_failure_rate = -1.0;
+
 		tab = palloc(sizeof(autovac_table));
 		tab->at_relid = relid;
 		tab->at_sharedrel = classForm->relisshared;
@@ -2806,13 +2842,8 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			(doanalyze ? VACOPT_ANALYZE : 0) |
 			(!wraparound ? VACOPT_SKIP_LOCKED : 0);
 
-		/*
-		 * index_cleanup and truncate are unspecified at first in autovacuum.
-		 * They will be filled in with usable values using their reloptions
-		 * (or reloption defaults) later.
-		 */
-		tab->at_params.index_cleanup = VACOPTVALUE_UNSPECIFIED;
-		tab->at_params.truncate = VACOPTVALUE_UNSPECIFIED;
+		tab->at_params.index_cleanup = index_cleanup;
+		tab->at_params.truncate = truncate;
 		/* As of now, we don't support parallel vacuum for autovacuum */
 		tab->at_params.nworkers = -1;
 		tab->at_params.freeze_min_age = freeze_min_age;
@@ -2822,12 +2853,7 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		tab->at_params.is_wraparound = wraparound;
 		tab->at_params.log_min_duration = log_min_duration;
 		tab->at_params.toast_parent = InvalidOid;
-
-		/*
-		 * Later, in vacuum_rel(), we check reloptions for any
-		 * vacuum_max_eager_freeze_failure_rate override.
-		 */
-		tab->at_params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+		tab->at_params.max_eager_freeze_failure_rate = max_eager_freeze_failure_rate;
 		tab->at_storage_param_vac_cost_limit = avopts ?
 			avopts->vacuum_cost_limit : 0;
 		tab->at_storage_param_vac_cost_delay = avopts ?
-- 
2.39.5 (Apple Git-154)


--QWBYbd5Ar5k8NvSv
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
	filename=v1-0003-autovac-combine-reloptions-correctly.patch



^ permalink  raw  reply  [nested|flat] 804+ messages in thread

* [PATCH v1 2/4] autovac: resolve relopts before vacuuming
@ 2025-06-23 19:42 Nathan Bossart <[email protected]>
  0 siblings, 0 replies; 804+ messages in thread

From: Nathan Bossart @ 2025-06-23 19:42 UTC (permalink / raw)

---
 src/backend/commands/vacuum.c       |  7 ++--
 src/backend/postmaster/autovacuum.c | 52 +++++++++++++++++++++--------
 2 files changed, 44 insertions(+), 15 deletions(-)

diff --git a/src/backend/commands/vacuum.c b/src/backend/commands/vacuum.c
index 33a33bf6b1c..0015b9ef4b0 100644
--- a/src/backend/commands/vacuum.c
+++ b/src/backend/commands/vacuum.c
@@ -421,7 +421,7 @@ ExecVacuum(ParseState *pstate, VacuumStmt *vacstmt, bool isTopLevel)
 	/*
 	 * Later, in vacuum_rel(), we check if a reloption override was specified.
 	 */
-	params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+	params.max_eager_freeze_failure_rate = -1.0;
 
 	/*
 	 * Create special memory context for cross-transaction storage.
@@ -2195,10 +2195,13 @@ vacuum_rel(Oid relid, RangeVar *relation, VacuumParams *params,
 	 * Check if the vacuum_max_eager_freeze_failure_rate table storage
 	 * parameter was specified. This overrides the GUC value.
 	 */
-	if (rel->rd_options != NULL &&
+	if (params->max_eager_freeze_failure_rate < 0 &&
+		rel->rd_options != NULL &&
 		((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate >= 0)
 		params->max_eager_freeze_failure_rate =
 			((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate;
+	else
+		params->max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
 
 	/*
 	 * Set truncate option based on truncate reloption or GUC if it wasn't
diff --git a/src/backend/postmaster/autovacuum.c b/src/backend/postmaster/autovacuum.c
index f86c9fed853..3bedca971ff 100644
--- a/src/backend/postmaster/autovacuum.c
+++ b/src/backend/postmaster/autovacuum.c
@@ -2758,6 +2758,9 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		int			multixact_freeze_table_age;
 		int			log_min_duration;
 		AutoVacOpts *avopts = (relopts ? &relopts->autovacuum : NULL);
+		VacOptValue index_cleanup;
+		VacOptValue truncate;
+		double		max_eager_freeze_failure_rate;
 
 		/*
 		 * Calculate the vacuum cost parameters and the freeze ages.  If there
@@ -2790,6 +2793,39 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			? avopts->multixact_freeze_table_age
 			: default_multixact_freeze_table_age;
 
+		if (relopts)
+		{
+			switch (relopts->vacuum_index_cleanup)
+			{
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_AUTO:
+					index_cleanup = VACOPTVALUE_AUTO;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_ON:
+					index_cleanup = VACOPTVALUE_ENABLED;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_OFF:
+					index_cleanup = VACOPTVALUE_DISABLED;
+					break;
+			}
+		}
+		else
+			index_cleanup = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_truncate_set)
+		{
+			if (relopts->vacuum_truncate)
+				truncate = VACOPTVALUE_ENABLED;
+			else
+				truncate = VACOPTVALUE_DISABLED;
+		}
+		else
+			truncate = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_max_eager_freeze_failure_rate >= 0)
+			max_eager_freeze_failure_rate = relopts->vacuum_max_eager_freeze_failure_rate;
+		else
+			max_eager_freeze_failure_rate = -1.0;
+
 		tab = palloc(sizeof(autovac_table));
 		tab->at_relid = relid;
 		tab->at_sharedrel = classForm->relisshared;
@@ -2806,13 +2842,8 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			(doanalyze ? VACOPT_ANALYZE : 0) |
 			(!wraparound ? VACOPT_SKIP_LOCKED : 0);
 
-		/*
-		 * index_cleanup and truncate are unspecified at first in autovacuum.
-		 * They will be filled in with usable values using their reloptions
-		 * (or reloption defaults) later.
-		 */
-		tab->at_params.index_cleanup = VACOPTVALUE_UNSPECIFIED;
-		tab->at_params.truncate = VACOPTVALUE_UNSPECIFIED;
+		tab->at_params.index_cleanup = index_cleanup;
+		tab->at_params.truncate = truncate;
 		/* As of now, we don't support parallel vacuum for autovacuum */
 		tab->at_params.nworkers = -1;
 		tab->at_params.freeze_min_age = freeze_min_age;
@@ -2822,12 +2853,7 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		tab->at_params.is_wraparound = wraparound;
 		tab->at_params.log_min_duration = log_min_duration;
 		tab->at_params.toast_parent = InvalidOid;
-
-		/*
-		 * Later, in vacuum_rel(), we check reloptions for any
-		 * vacuum_max_eager_freeze_failure_rate override.
-		 */
-		tab->at_params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+		tab->at_params.max_eager_freeze_failure_rate = max_eager_freeze_failure_rate;
 		tab->at_storage_param_vac_cost_limit = avopts ?
 			avopts->vacuum_cost_limit : 0;
 		tab->at_storage_param_vac_cost_delay = avopts ?
-- 
2.39.5 (Apple Git-154)


--QWBYbd5Ar5k8NvSv
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
	filename=v1-0003-autovac-combine-reloptions-correctly.patch



^ permalink  raw  reply  [nested|flat] 804+ messages in thread

* [PATCH v1 2/4] autovac: resolve relopts before vacuuming
@ 2025-06-23 19:42 Nathan Bossart <[email protected]>
  0 siblings, 0 replies; 804+ messages in thread

From: Nathan Bossart @ 2025-06-23 19:42 UTC (permalink / raw)

---
 src/backend/commands/vacuum.c       |  7 ++--
 src/backend/postmaster/autovacuum.c | 52 +++++++++++++++++++++--------
 2 files changed, 44 insertions(+), 15 deletions(-)

diff --git a/src/backend/commands/vacuum.c b/src/backend/commands/vacuum.c
index 33a33bf6b1c..0015b9ef4b0 100644
--- a/src/backend/commands/vacuum.c
+++ b/src/backend/commands/vacuum.c
@@ -421,7 +421,7 @@ ExecVacuum(ParseState *pstate, VacuumStmt *vacstmt, bool isTopLevel)
 	/*
 	 * Later, in vacuum_rel(), we check if a reloption override was specified.
 	 */
-	params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+	params.max_eager_freeze_failure_rate = -1.0;
 
 	/*
 	 * Create special memory context for cross-transaction storage.
@@ -2195,10 +2195,13 @@ vacuum_rel(Oid relid, RangeVar *relation, VacuumParams *params,
 	 * Check if the vacuum_max_eager_freeze_failure_rate table storage
 	 * parameter was specified. This overrides the GUC value.
 	 */
-	if (rel->rd_options != NULL &&
+	if (params->max_eager_freeze_failure_rate < 0 &&
+		rel->rd_options != NULL &&
 		((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate >= 0)
 		params->max_eager_freeze_failure_rate =
 			((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate;
+	else
+		params->max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
 
 	/*
 	 * Set truncate option based on truncate reloption or GUC if it wasn't
diff --git a/src/backend/postmaster/autovacuum.c b/src/backend/postmaster/autovacuum.c
index f86c9fed853..3bedca971ff 100644
--- a/src/backend/postmaster/autovacuum.c
+++ b/src/backend/postmaster/autovacuum.c
@@ -2758,6 +2758,9 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		int			multixact_freeze_table_age;
 		int			log_min_duration;
 		AutoVacOpts *avopts = (relopts ? &relopts->autovacuum : NULL);
+		VacOptValue index_cleanup;
+		VacOptValue truncate;
+		double		max_eager_freeze_failure_rate;
 
 		/*
 		 * Calculate the vacuum cost parameters and the freeze ages.  If there
@@ -2790,6 +2793,39 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			? avopts->multixact_freeze_table_age
 			: default_multixact_freeze_table_age;
 
+		if (relopts)
+		{
+			switch (relopts->vacuum_index_cleanup)
+			{
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_AUTO:
+					index_cleanup = VACOPTVALUE_AUTO;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_ON:
+					index_cleanup = VACOPTVALUE_ENABLED;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_OFF:
+					index_cleanup = VACOPTVALUE_DISABLED;
+					break;
+			}
+		}
+		else
+			index_cleanup = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_truncate_set)
+		{
+			if (relopts->vacuum_truncate)
+				truncate = VACOPTVALUE_ENABLED;
+			else
+				truncate = VACOPTVALUE_DISABLED;
+		}
+		else
+			truncate = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_max_eager_freeze_failure_rate >= 0)
+			max_eager_freeze_failure_rate = relopts->vacuum_max_eager_freeze_failure_rate;
+		else
+			max_eager_freeze_failure_rate = -1.0;
+
 		tab = palloc(sizeof(autovac_table));
 		tab->at_relid = relid;
 		tab->at_sharedrel = classForm->relisshared;
@@ -2806,13 +2842,8 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			(doanalyze ? VACOPT_ANALYZE : 0) |
 			(!wraparound ? VACOPT_SKIP_LOCKED : 0);
 
-		/*
-		 * index_cleanup and truncate are unspecified at first in autovacuum.
-		 * They will be filled in with usable values using their reloptions
-		 * (or reloption defaults) later.
-		 */
-		tab->at_params.index_cleanup = VACOPTVALUE_UNSPECIFIED;
-		tab->at_params.truncate = VACOPTVALUE_UNSPECIFIED;
+		tab->at_params.index_cleanup = index_cleanup;
+		tab->at_params.truncate = truncate;
 		/* As of now, we don't support parallel vacuum for autovacuum */
 		tab->at_params.nworkers = -1;
 		tab->at_params.freeze_min_age = freeze_min_age;
@@ -2822,12 +2853,7 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		tab->at_params.is_wraparound = wraparound;
 		tab->at_params.log_min_duration = log_min_duration;
 		tab->at_params.toast_parent = InvalidOid;
-
-		/*
-		 * Later, in vacuum_rel(), we check reloptions for any
-		 * vacuum_max_eager_freeze_failure_rate override.
-		 */
-		tab->at_params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+		tab->at_params.max_eager_freeze_failure_rate = max_eager_freeze_failure_rate;
 		tab->at_storage_param_vac_cost_limit = avopts ?
 			avopts->vacuum_cost_limit : 0;
 		tab->at_storage_param_vac_cost_delay = avopts ?
-- 
2.39.5 (Apple Git-154)


--QWBYbd5Ar5k8NvSv
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
	filename=v1-0003-autovac-combine-reloptions-correctly.patch



^ permalink  raw  reply  [nested|flat] 804+ messages in thread

* [PATCH v1 2/4] autovac: resolve relopts before vacuuming
@ 2025-06-23 19:42 Nathan Bossart <[email protected]>
  0 siblings, 0 replies; 804+ messages in thread

From: Nathan Bossart @ 2025-06-23 19:42 UTC (permalink / raw)

---
 src/backend/commands/vacuum.c       |  7 ++--
 src/backend/postmaster/autovacuum.c | 52 +++++++++++++++++++++--------
 2 files changed, 44 insertions(+), 15 deletions(-)

diff --git a/src/backend/commands/vacuum.c b/src/backend/commands/vacuum.c
index 33a33bf6b1c..0015b9ef4b0 100644
--- a/src/backend/commands/vacuum.c
+++ b/src/backend/commands/vacuum.c
@@ -421,7 +421,7 @@ ExecVacuum(ParseState *pstate, VacuumStmt *vacstmt, bool isTopLevel)
 	/*
 	 * Later, in vacuum_rel(), we check if a reloption override was specified.
 	 */
-	params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+	params.max_eager_freeze_failure_rate = -1.0;
 
 	/*
 	 * Create special memory context for cross-transaction storage.
@@ -2195,10 +2195,13 @@ vacuum_rel(Oid relid, RangeVar *relation, VacuumParams *params,
 	 * Check if the vacuum_max_eager_freeze_failure_rate table storage
 	 * parameter was specified. This overrides the GUC value.
 	 */
-	if (rel->rd_options != NULL &&
+	if (params->max_eager_freeze_failure_rate < 0 &&
+		rel->rd_options != NULL &&
 		((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate >= 0)
 		params->max_eager_freeze_failure_rate =
 			((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate;
+	else
+		params->max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
 
 	/*
 	 * Set truncate option based on truncate reloption or GUC if it wasn't
diff --git a/src/backend/postmaster/autovacuum.c b/src/backend/postmaster/autovacuum.c
index f86c9fed853..3bedca971ff 100644
--- a/src/backend/postmaster/autovacuum.c
+++ b/src/backend/postmaster/autovacuum.c
@@ -2758,6 +2758,9 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		int			multixact_freeze_table_age;
 		int			log_min_duration;
 		AutoVacOpts *avopts = (relopts ? &relopts->autovacuum : NULL);
+		VacOptValue index_cleanup;
+		VacOptValue truncate;
+		double		max_eager_freeze_failure_rate;
 
 		/*
 		 * Calculate the vacuum cost parameters and the freeze ages.  If there
@@ -2790,6 +2793,39 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			? avopts->multixact_freeze_table_age
 			: default_multixact_freeze_table_age;
 
+		if (relopts)
+		{
+			switch (relopts->vacuum_index_cleanup)
+			{
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_AUTO:
+					index_cleanup = VACOPTVALUE_AUTO;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_ON:
+					index_cleanup = VACOPTVALUE_ENABLED;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_OFF:
+					index_cleanup = VACOPTVALUE_DISABLED;
+					break;
+			}
+		}
+		else
+			index_cleanup = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_truncate_set)
+		{
+			if (relopts->vacuum_truncate)
+				truncate = VACOPTVALUE_ENABLED;
+			else
+				truncate = VACOPTVALUE_DISABLED;
+		}
+		else
+			truncate = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_max_eager_freeze_failure_rate >= 0)
+			max_eager_freeze_failure_rate = relopts->vacuum_max_eager_freeze_failure_rate;
+		else
+			max_eager_freeze_failure_rate = -1.0;
+
 		tab = palloc(sizeof(autovac_table));
 		tab->at_relid = relid;
 		tab->at_sharedrel = classForm->relisshared;
@@ -2806,13 +2842,8 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			(doanalyze ? VACOPT_ANALYZE : 0) |
 			(!wraparound ? VACOPT_SKIP_LOCKED : 0);
 
-		/*
-		 * index_cleanup and truncate are unspecified at first in autovacuum.
-		 * They will be filled in with usable values using their reloptions
-		 * (or reloption defaults) later.
-		 */
-		tab->at_params.index_cleanup = VACOPTVALUE_UNSPECIFIED;
-		tab->at_params.truncate = VACOPTVALUE_UNSPECIFIED;
+		tab->at_params.index_cleanup = index_cleanup;
+		tab->at_params.truncate = truncate;
 		/* As of now, we don't support parallel vacuum for autovacuum */
 		tab->at_params.nworkers = -1;
 		tab->at_params.freeze_min_age = freeze_min_age;
@@ -2822,12 +2853,7 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		tab->at_params.is_wraparound = wraparound;
 		tab->at_params.log_min_duration = log_min_duration;
 		tab->at_params.toast_parent = InvalidOid;
-
-		/*
-		 * Later, in vacuum_rel(), we check reloptions for any
-		 * vacuum_max_eager_freeze_failure_rate override.
-		 */
-		tab->at_params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+		tab->at_params.max_eager_freeze_failure_rate = max_eager_freeze_failure_rate;
 		tab->at_storage_param_vac_cost_limit = avopts ?
 			avopts->vacuum_cost_limit : 0;
 		tab->at_storage_param_vac_cost_delay = avopts ?
-- 
2.39.5 (Apple Git-154)


--QWBYbd5Ar5k8NvSv
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
	filename=v1-0003-autovac-combine-reloptions-correctly.patch



^ permalink  raw  reply  [nested|flat] 804+ messages in thread

* [PATCH v1 2/4] autovac: resolve relopts before vacuuming
@ 2025-06-23 19:42 Nathan Bossart <[email protected]>
  0 siblings, 0 replies; 804+ messages in thread

From: Nathan Bossart @ 2025-06-23 19:42 UTC (permalink / raw)

---
 src/backend/commands/vacuum.c       |  7 ++--
 src/backend/postmaster/autovacuum.c | 52 +++++++++++++++++++++--------
 2 files changed, 44 insertions(+), 15 deletions(-)

diff --git a/src/backend/commands/vacuum.c b/src/backend/commands/vacuum.c
index 33a33bf6b1c..0015b9ef4b0 100644
--- a/src/backend/commands/vacuum.c
+++ b/src/backend/commands/vacuum.c
@@ -421,7 +421,7 @@ ExecVacuum(ParseState *pstate, VacuumStmt *vacstmt, bool isTopLevel)
 	/*
 	 * Later, in vacuum_rel(), we check if a reloption override was specified.
 	 */
-	params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+	params.max_eager_freeze_failure_rate = -1.0;
 
 	/*
 	 * Create special memory context for cross-transaction storage.
@@ -2195,10 +2195,13 @@ vacuum_rel(Oid relid, RangeVar *relation, VacuumParams *params,
 	 * Check if the vacuum_max_eager_freeze_failure_rate table storage
 	 * parameter was specified. This overrides the GUC value.
 	 */
-	if (rel->rd_options != NULL &&
+	if (params->max_eager_freeze_failure_rate < 0 &&
+		rel->rd_options != NULL &&
 		((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate >= 0)
 		params->max_eager_freeze_failure_rate =
 			((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate;
+	else
+		params->max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
 
 	/*
 	 * Set truncate option based on truncate reloption or GUC if it wasn't
diff --git a/src/backend/postmaster/autovacuum.c b/src/backend/postmaster/autovacuum.c
index f86c9fed853..3bedca971ff 100644
--- a/src/backend/postmaster/autovacuum.c
+++ b/src/backend/postmaster/autovacuum.c
@@ -2758,6 +2758,9 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		int			multixact_freeze_table_age;
 		int			log_min_duration;
 		AutoVacOpts *avopts = (relopts ? &relopts->autovacuum : NULL);
+		VacOptValue index_cleanup;
+		VacOptValue truncate;
+		double		max_eager_freeze_failure_rate;
 
 		/*
 		 * Calculate the vacuum cost parameters and the freeze ages.  If there
@@ -2790,6 +2793,39 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			? avopts->multixact_freeze_table_age
 			: default_multixact_freeze_table_age;
 
+		if (relopts)
+		{
+			switch (relopts->vacuum_index_cleanup)
+			{
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_AUTO:
+					index_cleanup = VACOPTVALUE_AUTO;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_ON:
+					index_cleanup = VACOPTVALUE_ENABLED;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_OFF:
+					index_cleanup = VACOPTVALUE_DISABLED;
+					break;
+			}
+		}
+		else
+			index_cleanup = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_truncate_set)
+		{
+			if (relopts->vacuum_truncate)
+				truncate = VACOPTVALUE_ENABLED;
+			else
+				truncate = VACOPTVALUE_DISABLED;
+		}
+		else
+			truncate = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_max_eager_freeze_failure_rate >= 0)
+			max_eager_freeze_failure_rate = relopts->vacuum_max_eager_freeze_failure_rate;
+		else
+			max_eager_freeze_failure_rate = -1.0;
+
 		tab = palloc(sizeof(autovac_table));
 		tab->at_relid = relid;
 		tab->at_sharedrel = classForm->relisshared;
@@ -2806,13 +2842,8 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			(doanalyze ? VACOPT_ANALYZE : 0) |
 			(!wraparound ? VACOPT_SKIP_LOCKED : 0);
 
-		/*
-		 * index_cleanup and truncate are unspecified at first in autovacuum.
-		 * They will be filled in with usable values using their reloptions
-		 * (or reloption defaults) later.
-		 */
-		tab->at_params.index_cleanup = VACOPTVALUE_UNSPECIFIED;
-		tab->at_params.truncate = VACOPTVALUE_UNSPECIFIED;
+		tab->at_params.index_cleanup = index_cleanup;
+		tab->at_params.truncate = truncate;
 		/* As of now, we don't support parallel vacuum for autovacuum */
 		tab->at_params.nworkers = -1;
 		tab->at_params.freeze_min_age = freeze_min_age;
@@ -2822,12 +2853,7 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		tab->at_params.is_wraparound = wraparound;
 		tab->at_params.log_min_duration = log_min_duration;
 		tab->at_params.toast_parent = InvalidOid;
-
-		/*
-		 * Later, in vacuum_rel(), we check reloptions for any
-		 * vacuum_max_eager_freeze_failure_rate override.
-		 */
-		tab->at_params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+		tab->at_params.max_eager_freeze_failure_rate = max_eager_freeze_failure_rate;
 		tab->at_storage_param_vac_cost_limit = avopts ?
 			avopts->vacuum_cost_limit : 0;
 		tab->at_storage_param_vac_cost_delay = avopts ?
-- 
2.39.5 (Apple Git-154)


--QWBYbd5Ar5k8NvSv
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
	filename=v1-0003-autovac-combine-reloptions-correctly.patch



^ permalink  raw  reply  [nested|flat] 804+ messages in thread

* [PATCH v1 2/4] autovac: resolve relopts before vacuuming
@ 2025-06-23 19:42 Nathan Bossart <[email protected]>
  0 siblings, 0 replies; 804+ messages in thread

From: Nathan Bossart @ 2025-06-23 19:42 UTC (permalink / raw)

---
 src/backend/commands/vacuum.c       |  7 ++--
 src/backend/postmaster/autovacuum.c | 52 +++++++++++++++++++++--------
 2 files changed, 44 insertions(+), 15 deletions(-)

diff --git a/src/backend/commands/vacuum.c b/src/backend/commands/vacuum.c
index 33a33bf6b1c..0015b9ef4b0 100644
--- a/src/backend/commands/vacuum.c
+++ b/src/backend/commands/vacuum.c
@@ -421,7 +421,7 @@ ExecVacuum(ParseState *pstate, VacuumStmt *vacstmt, bool isTopLevel)
 	/*
 	 * Later, in vacuum_rel(), we check if a reloption override was specified.
 	 */
-	params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+	params.max_eager_freeze_failure_rate = -1.0;
 
 	/*
 	 * Create special memory context for cross-transaction storage.
@@ -2195,10 +2195,13 @@ vacuum_rel(Oid relid, RangeVar *relation, VacuumParams *params,
 	 * Check if the vacuum_max_eager_freeze_failure_rate table storage
 	 * parameter was specified. This overrides the GUC value.
 	 */
-	if (rel->rd_options != NULL &&
+	if (params->max_eager_freeze_failure_rate < 0 &&
+		rel->rd_options != NULL &&
 		((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate >= 0)
 		params->max_eager_freeze_failure_rate =
 			((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate;
+	else
+		params->max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
 
 	/*
 	 * Set truncate option based on truncate reloption or GUC if it wasn't
diff --git a/src/backend/postmaster/autovacuum.c b/src/backend/postmaster/autovacuum.c
index f86c9fed853..3bedca971ff 100644
--- a/src/backend/postmaster/autovacuum.c
+++ b/src/backend/postmaster/autovacuum.c
@@ -2758,6 +2758,9 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		int			multixact_freeze_table_age;
 		int			log_min_duration;
 		AutoVacOpts *avopts = (relopts ? &relopts->autovacuum : NULL);
+		VacOptValue index_cleanup;
+		VacOptValue truncate;
+		double		max_eager_freeze_failure_rate;
 
 		/*
 		 * Calculate the vacuum cost parameters and the freeze ages.  If there
@@ -2790,6 +2793,39 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			? avopts->multixact_freeze_table_age
 			: default_multixact_freeze_table_age;
 
+		if (relopts)
+		{
+			switch (relopts->vacuum_index_cleanup)
+			{
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_AUTO:
+					index_cleanup = VACOPTVALUE_AUTO;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_ON:
+					index_cleanup = VACOPTVALUE_ENABLED;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_OFF:
+					index_cleanup = VACOPTVALUE_DISABLED;
+					break;
+			}
+		}
+		else
+			index_cleanup = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_truncate_set)
+		{
+			if (relopts->vacuum_truncate)
+				truncate = VACOPTVALUE_ENABLED;
+			else
+				truncate = VACOPTVALUE_DISABLED;
+		}
+		else
+			truncate = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_max_eager_freeze_failure_rate >= 0)
+			max_eager_freeze_failure_rate = relopts->vacuum_max_eager_freeze_failure_rate;
+		else
+			max_eager_freeze_failure_rate = -1.0;
+
 		tab = palloc(sizeof(autovac_table));
 		tab->at_relid = relid;
 		tab->at_sharedrel = classForm->relisshared;
@@ -2806,13 +2842,8 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			(doanalyze ? VACOPT_ANALYZE : 0) |
 			(!wraparound ? VACOPT_SKIP_LOCKED : 0);
 
-		/*
-		 * index_cleanup and truncate are unspecified at first in autovacuum.
-		 * They will be filled in with usable values using their reloptions
-		 * (or reloption defaults) later.
-		 */
-		tab->at_params.index_cleanup = VACOPTVALUE_UNSPECIFIED;
-		tab->at_params.truncate = VACOPTVALUE_UNSPECIFIED;
+		tab->at_params.index_cleanup = index_cleanup;
+		tab->at_params.truncate = truncate;
 		/* As of now, we don't support parallel vacuum for autovacuum */
 		tab->at_params.nworkers = -1;
 		tab->at_params.freeze_min_age = freeze_min_age;
@@ -2822,12 +2853,7 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		tab->at_params.is_wraparound = wraparound;
 		tab->at_params.log_min_duration = log_min_duration;
 		tab->at_params.toast_parent = InvalidOid;
-
-		/*
-		 * Later, in vacuum_rel(), we check reloptions for any
-		 * vacuum_max_eager_freeze_failure_rate override.
-		 */
-		tab->at_params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+		tab->at_params.max_eager_freeze_failure_rate = max_eager_freeze_failure_rate;
 		tab->at_storage_param_vac_cost_limit = avopts ?
 			avopts->vacuum_cost_limit : 0;
 		tab->at_storage_param_vac_cost_delay = avopts ?
-- 
2.39.5 (Apple Git-154)


--QWBYbd5Ar5k8NvSv
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
	filename=v1-0003-autovac-combine-reloptions-correctly.patch



^ permalink  raw  reply  [nested|flat] 804+ messages in thread

* [PATCH v1 2/4] autovac: resolve relopts before vacuuming
@ 2025-06-23 19:42 Nathan Bossart <[email protected]>
  0 siblings, 0 replies; 804+ messages in thread

From: Nathan Bossart @ 2025-06-23 19:42 UTC (permalink / raw)

---
 src/backend/commands/vacuum.c       |  7 ++--
 src/backend/postmaster/autovacuum.c | 52 +++++++++++++++++++++--------
 2 files changed, 44 insertions(+), 15 deletions(-)

diff --git a/src/backend/commands/vacuum.c b/src/backend/commands/vacuum.c
index 33a33bf6b1c..0015b9ef4b0 100644
--- a/src/backend/commands/vacuum.c
+++ b/src/backend/commands/vacuum.c
@@ -421,7 +421,7 @@ ExecVacuum(ParseState *pstate, VacuumStmt *vacstmt, bool isTopLevel)
 	/*
 	 * Later, in vacuum_rel(), we check if a reloption override was specified.
 	 */
-	params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+	params.max_eager_freeze_failure_rate = -1.0;
 
 	/*
 	 * Create special memory context for cross-transaction storage.
@@ -2195,10 +2195,13 @@ vacuum_rel(Oid relid, RangeVar *relation, VacuumParams *params,
 	 * Check if the vacuum_max_eager_freeze_failure_rate table storage
 	 * parameter was specified. This overrides the GUC value.
 	 */
-	if (rel->rd_options != NULL &&
+	if (params->max_eager_freeze_failure_rate < 0 &&
+		rel->rd_options != NULL &&
 		((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate >= 0)
 		params->max_eager_freeze_failure_rate =
 			((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate;
+	else
+		params->max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
 
 	/*
 	 * Set truncate option based on truncate reloption or GUC if it wasn't
diff --git a/src/backend/postmaster/autovacuum.c b/src/backend/postmaster/autovacuum.c
index f86c9fed853..3bedca971ff 100644
--- a/src/backend/postmaster/autovacuum.c
+++ b/src/backend/postmaster/autovacuum.c
@@ -2758,6 +2758,9 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		int			multixact_freeze_table_age;
 		int			log_min_duration;
 		AutoVacOpts *avopts = (relopts ? &relopts->autovacuum : NULL);
+		VacOptValue index_cleanup;
+		VacOptValue truncate;
+		double		max_eager_freeze_failure_rate;
 
 		/*
 		 * Calculate the vacuum cost parameters and the freeze ages.  If there
@@ -2790,6 +2793,39 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			? avopts->multixact_freeze_table_age
 			: default_multixact_freeze_table_age;
 
+		if (relopts)
+		{
+			switch (relopts->vacuum_index_cleanup)
+			{
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_AUTO:
+					index_cleanup = VACOPTVALUE_AUTO;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_ON:
+					index_cleanup = VACOPTVALUE_ENABLED;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_OFF:
+					index_cleanup = VACOPTVALUE_DISABLED;
+					break;
+			}
+		}
+		else
+			index_cleanup = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_truncate_set)
+		{
+			if (relopts->vacuum_truncate)
+				truncate = VACOPTVALUE_ENABLED;
+			else
+				truncate = VACOPTVALUE_DISABLED;
+		}
+		else
+			truncate = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_max_eager_freeze_failure_rate >= 0)
+			max_eager_freeze_failure_rate = relopts->vacuum_max_eager_freeze_failure_rate;
+		else
+			max_eager_freeze_failure_rate = -1.0;
+
 		tab = palloc(sizeof(autovac_table));
 		tab->at_relid = relid;
 		tab->at_sharedrel = classForm->relisshared;
@@ -2806,13 +2842,8 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			(doanalyze ? VACOPT_ANALYZE : 0) |
 			(!wraparound ? VACOPT_SKIP_LOCKED : 0);
 
-		/*
-		 * index_cleanup and truncate are unspecified at first in autovacuum.
-		 * They will be filled in with usable values using their reloptions
-		 * (or reloption defaults) later.
-		 */
-		tab->at_params.index_cleanup = VACOPTVALUE_UNSPECIFIED;
-		tab->at_params.truncate = VACOPTVALUE_UNSPECIFIED;
+		tab->at_params.index_cleanup = index_cleanup;
+		tab->at_params.truncate = truncate;
 		/* As of now, we don't support parallel vacuum for autovacuum */
 		tab->at_params.nworkers = -1;
 		tab->at_params.freeze_min_age = freeze_min_age;
@@ -2822,12 +2853,7 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		tab->at_params.is_wraparound = wraparound;
 		tab->at_params.log_min_duration = log_min_duration;
 		tab->at_params.toast_parent = InvalidOid;
-
-		/*
-		 * Later, in vacuum_rel(), we check reloptions for any
-		 * vacuum_max_eager_freeze_failure_rate override.
-		 */
-		tab->at_params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+		tab->at_params.max_eager_freeze_failure_rate = max_eager_freeze_failure_rate;
 		tab->at_storage_param_vac_cost_limit = avopts ?
 			avopts->vacuum_cost_limit : 0;
 		tab->at_storage_param_vac_cost_delay = avopts ?
-- 
2.39.5 (Apple Git-154)


--QWBYbd5Ar5k8NvSv
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
	filename=v1-0003-autovac-combine-reloptions-correctly.patch



^ permalink  raw  reply  [nested|flat] 804+ messages in thread

* [PATCH v1 2/4] autovac: resolve relopts before vacuuming
@ 2025-06-23 19:42 Nathan Bossart <[email protected]>
  0 siblings, 0 replies; 804+ messages in thread

From: Nathan Bossart @ 2025-06-23 19:42 UTC (permalink / raw)

---
 src/backend/commands/vacuum.c       |  7 ++--
 src/backend/postmaster/autovacuum.c | 52 +++++++++++++++++++++--------
 2 files changed, 44 insertions(+), 15 deletions(-)

diff --git a/src/backend/commands/vacuum.c b/src/backend/commands/vacuum.c
index 33a33bf6b1c..0015b9ef4b0 100644
--- a/src/backend/commands/vacuum.c
+++ b/src/backend/commands/vacuum.c
@@ -421,7 +421,7 @@ ExecVacuum(ParseState *pstate, VacuumStmt *vacstmt, bool isTopLevel)
 	/*
 	 * Later, in vacuum_rel(), we check if a reloption override was specified.
 	 */
-	params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+	params.max_eager_freeze_failure_rate = -1.0;
 
 	/*
 	 * Create special memory context for cross-transaction storage.
@@ -2195,10 +2195,13 @@ vacuum_rel(Oid relid, RangeVar *relation, VacuumParams *params,
 	 * Check if the vacuum_max_eager_freeze_failure_rate table storage
 	 * parameter was specified. This overrides the GUC value.
 	 */
-	if (rel->rd_options != NULL &&
+	if (params->max_eager_freeze_failure_rate < 0 &&
+		rel->rd_options != NULL &&
 		((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate >= 0)
 		params->max_eager_freeze_failure_rate =
 			((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate;
+	else
+		params->max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
 
 	/*
 	 * Set truncate option based on truncate reloption or GUC if it wasn't
diff --git a/src/backend/postmaster/autovacuum.c b/src/backend/postmaster/autovacuum.c
index f86c9fed853..3bedca971ff 100644
--- a/src/backend/postmaster/autovacuum.c
+++ b/src/backend/postmaster/autovacuum.c
@@ -2758,6 +2758,9 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		int			multixact_freeze_table_age;
 		int			log_min_duration;
 		AutoVacOpts *avopts = (relopts ? &relopts->autovacuum : NULL);
+		VacOptValue index_cleanup;
+		VacOptValue truncate;
+		double		max_eager_freeze_failure_rate;
 
 		/*
 		 * Calculate the vacuum cost parameters and the freeze ages.  If there
@@ -2790,6 +2793,39 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			? avopts->multixact_freeze_table_age
 			: default_multixact_freeze_table_age;
 
+		if (relopts)
+		{
+			switch (relopts->vacuum_index_cleanup)
+			{
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_AUTO:
+					index_cleanup = VACOPTVALUE_AUTO;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_ON:
+					index_cleanup = VACOPTVALUE_ENABLED;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_OFF:
+					index_cleanup = VACOPTVALUE_DISABLED;
+					break;
+			}
+		}
+		else
+			index_cleanup = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_truncate_set)
+		{
+			if (relopts->vacuum_truncate)
+				truncate = VACOPTVALUE_ENABLED;
+			else
+				truncate = VACOPTVALUE_DISABLED;
+		}
+		else
+			truncate = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_max_eager_freeze_failure_rate >= 0)
+			max_eager_freeze_failure_rate = relopts->vacuum_max_eager_freeze_failure_rate;
+		else
+			max_eager_freeze_failure_rate = -1.0;
+
 		tab = palloc(sizeof(autovac_table));
 		tab->at_relid = relid;
 		tab->at_sharedrel = classForm->relisshared;
@@ -2806,13 +2842,8 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			(doanalyze ? VACOPT_ANALYZE : 0) |
 			(!wraparound ? VACOPT_SKIP_LOCKED : 0);
 
-		/*
-		 * index_cleanup and truncate are unspecified at first in autovacuum.
-		 * They will be filled in with usable values using their reloptions
-		 * (or reloption defaults) later.
-		 */
-		tab->at_params.index_cleanup = VACOPTVALUE_UNSPECIFIED;
-		tab->at_params.truncate = VACOPTVALUE_UNSPECIFIED;
+		tab->at_params.index_cleanup = index_cleanup;
+		tab->at_params.truncate = truncate;
 		/* As of now, we don't support parallel vacuum for autovacuum */
 		tab->at_params.nworkers = -1;
 		tab->at_params.freeze_min_age = freeze_min_age;
@@ -2822,12 +2853,7 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		tab->at_params.is_wraparound = wraparound;
 		tab->at_params.log_min_duration = log_min_duration;
 		tab->at_params.toast_parent = InvalidOid;
-
-		/*
-		 * Later, in vacuum_rel(), we check reloptions for any
-		 * vacuum_max_eager_freeze_failure_rate override.
-		 */
-		tab->at_params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+		tab->at_params.max_eager_freeze_failure_rate = max_eager_freeze_failure_rate;
 		tab->at_storage_param_vac_cost_limit = avopts ?
 			avopts->vacuum_cost_limit : 0;
 		tab->at_storage_param_vac_cost_delay = avopts ?
-- 
2.39.5 (Apple Git-154)


--QWBYbd5Ar5k8NvSv
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
	filename=v1-0003-autovac-combine-reloptions-correctly.patch



^ permalink  raw  reply  [nested|flat] 804+ messages in thread

* [PATCH v1 2/4] autovac: resolve relopts before vacuuming
@ 2025-06-23 19:42 Nathan Bossart <[email protected]>
  0 siblings, 0 replies; 804+ messages in thread

From: Nathan Bossart @ 2025-06-23 19:42 UTC (permalink / raw)

---
 src/backend/commands/vacuum.c       |  7 ++--
 src/backend/postmaster/autovacuum.c | 52 +++++++++++++++++++++--------
 2 files changed, 44 insertions(+), 15 deletions(-)

diff --git a/src/backend/commands/vacuum.c b/src/backend/commands/vacuum.c
index 33a33bf6b1c..0015b9ef4b0 100644
--- a/src/backend/commands/vacuum.c
+++ b/src/backend/commands/vacuum.c
@@ -421,7 +421,7 @@ ExecVacuum(ParseState *pstate, VacuumStmt *vacstmt, bool isTopLevel)
 	/*
 	 * Later, in vacuum_rel(), we check if a reloption override was specified.
 	 */
-	params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+	params.max_eager_freeze_failure_rate = -1.0;
 
 	/*
 	 * Create special memory context for cross-transaction storage.
@@ -2195,10 +2195,13 @@ vacuum_rel(Oid relid, RangeVar *relation, VacuumParams *params,
 	 * Check if the vacuum_max_eager_freeze_failure_rate table storage
 	 * parameter was specified. This overrides the GUC value.
 	 */
-	if (rel->rd_options != NULL &&
+	if (params->max_eager_freeze_failure_rate < 0 &&
+		rel->rd_options != NULL &&
 		((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate >= 0)
 		params->max_eager_freeze_failure_rate =
 			((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate;
+	else
+		params->max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
 
 	/*
 	 * Set truncate option based on truncate reloption or GUC if it wasn't
diff --git a/src/backend/postmaster/autovacuum.c b/src/backend/postmaster/autovacuum.c
index f86c9fed853..3bedca971ff 100644
--- a/src/backend/postmaster/autovacuum.c
+++ b/src/backend/postmaster/autovacuum.c
@@ -2758,6 +2758,9 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		int			multixact_freeze_table_age;
 		int			log_min_duration;
 		AutoVacOpts *avopts = (relopts ? &relopts->autovacuum : NULL);
+		VacOptValue index_cleanup;
+		VacOptValue truncate;
+		double		max_eager_freeze_failure_rate;
 
 		/*
 		 * Calculate the vacuum cost parameters and the freeze ages.  If there
@@ -2790,6 +2793,39 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			? avopts->multixact_freeze_table_age
 			: default_multixact_freeze_table_age;
 
+		if (relopts)
+		{
+			switch (relopts->vacuum_index_cleanup)
+			{
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_AUTO:
+					index_cleanup = VACOPTVALUE_AUTO;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_ON:
+					index_cleanup = VACOPTVALUE_ENABLED;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_OFF:
+					index_cleanup = VACOPTVALUE_DISABLED;
+					break;
+			}
+		}
+		else
+			index_cleanup = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_truncate_set)
+		{
+			if (relopts->vacuum_truncate)
+				truncate = VACOPTVALUE_ENABLED;
+			else
+				truncate = VACOPTVALUE_DISABLED;
+		}
+		else
+			truncate = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_max_eager_freeze_failure_rate >= 0)
+			max_eager_freeze_failure_rate = relopts->vacuum_max_eager_freeze_failure_rate;
+		else
+			max_eager_freeze_failure_rate = -1.0;
+
 		tab = palloc(sizeof(autovac_table));
 		tab->at_relid = relid;
 		tab->at_sharedrel = classForm->relisshared;
@@ -2806,13 +2842,8 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			(doanalyze ? VACOPT_ANALYZE : 0) |
 			(!wraparound ? VACOPT_SKIP_LOCKED : 0);
 
-		/*
-		 * index_cleanup and truncate are unspecified at first in autovacuum.
-		 * They will be filled in with usable values using their reloptions
-		 * (or reloption defaults) later.
-		 */
-		tab->at_params.index_cleanup = VACOPTVALUE_UNSPECIFIED;
-		tab->at_params.truncate = VACOPTVALUE_UNSPECIFIED;
+		tab->at_params.index_cleanup = index_cleanup;
+		tab->at_params.truncate = truncate;
 		/* As of now, we don't support parallel vacuum for autovacuum */
 		tab->at_params.nworkers = -1;
 		tab->at_params.freeze_min_age = freeze_min_age;
@@ -2822,12 +2853,7 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		tab->at_params.is_wraparound = wraparound;
 		tab->at_params.log_min_duration = log_min_duration;
 		tab->at_params.toast_parent = InvalidOid;
-
-		/*
-		 * Later, in vacuum_rel(), we check reloptions for any
-		 * vacuum_max_eager_freeze_failure_rate override.
-		 */
-		tab->at_params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+		tab->at_params.max_eager_freeze_failure_rate = max_eager_freeze_failure_rate;
 		tab->at_storage_param_vac_cost_limit = avopts ?
 			avopts->vacuum_cost_limit : 0;
 		tab->at_storage_param_vac_cost_delay = avopts ?
-- 
2.39.5 (Apple Git-154)


--QWBYbd5Ar5k8NvSv
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
	filename=v1-0003-autovac-combine-reloptions-correctly.patch



^ permalink  raw  reply  [nested|flat] 804+ messages in thread

* [PATCH v1 2/4] autovac: resolve relopts before vacuuming
@ 2025-06-23 19:42 Nathan Bossart <[email protected]>
  0 siblings, 0 replies; 804+ messages in thread

From: Nathan Bossart @ 2025-06-23 19:42 UTC (permalink / raw)

---
 src/backend/commands/vacuum.c       |  7 ++--
 src/backend/postmaster/autovacuum.c | 52 +++++++++++++++++++++--------
 2 files changed, 44 insertions(+), 15 deletions(-)

diff --git a/src/backend/commands/vacuum.c b/src/backend/commands/vacuum.c
index 33a33bf6b1c..0015b9ef4b0 100644
--- a/src/backend/commands/vacuum.c
+++ b/src/backend/commands/vacuum.c
@@ -421,7 +421,7 @@ ExecVacuum(ParseState *pstate, VacuumStmt *vacstmt, bool isTopLevel)
 	/*
 	 * Later, in vacuum_rel(), we check if a reloption override was specified.
 	 */
-	params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+	params.max_eager_freeze_failure_rate = -1.0;
 
 	/*
 	 * Create special memory context for cross-transaction storage.
@@ -2195,10 +2195,13 @@ vacuum_rel(Oid relid, RangeVar *relation, VacuumParams *params,
 	 * Check if the vacuum_max_eager_freeze_failure_rate table storage
 	 * parameter was specified. This overrides the GUC value.
 	 */
-	if (rel->rd_options != NULL &&
+	if (params->max_eager_freeze_failure_rate < 0 &&
+		rel->rd_options != NULL &&
 		((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate >= 0)
 		params->max_eager_freeze_failure_rate =
 			((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate;
+	else
+		params->max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
 
 	/*
 	 * Set truncate option based on truncate reloption or GUC if it wasn't
diff --git a/src/backend/postmaster/autovacuum.c b/src/backend/postmaster/autovacuum.c
index f86c9fed853..3bedca971ff 100644
--- a/src/backend/postmaster/autovacuum.c
+++ b/src/backend/postmaster/autovacuum.c
@@ -2758,6 +2758,9 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		int			multixact_freeze_table_age;
 		int			log_min_duration;
 		AutoVacOpts *avopts = (relopts ? &relopts->autovacuum : NULL);
+		VacOptValue index_cleanup;
+		VacOptValue truncate;
+		double		max_eager_freeze_failure_rate;
 
 		/*
 		 * Calculate the vacuum cost parameters and the freeze ages.  If there
@@ -2790,6 +2793,39 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			? avopts->multixact_freeze_table_age
 			: default_multixact_freeze_table_age;
 
+		if (relopts)
+		{
+			switch (relopts->vacuum_index_cleanup)
+			{
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_AUTO:
+					index_cleanup = VACOPTVALUE_AUTO;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_ON:
+					index_cleanup = VACOPTVALUE_ENABLED;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_OFF:
+					index_cleanup = VACOPTVALUE_DISABLED;
+					break;
+			}
+		}
+		else
+			index_cleanup = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_truncate_set)
+		{
+			if (relopts->vacuum_truncate)
+				truncate = VACOPTVALUE_ENABLED;
+			else
+				truncate = VACOPTVALUE_DISABLED;
+		}
+		else
+			truncate = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_max_eager_freeze_failure_rate >= 0)
+			max_eager_freeze_failure_rate = relopts->vacuum_max_eager_freeze_failure_rate;
+		else
+			max_eager_freeze_failure_rate = -1.0;
+
 		tab = palloc(sizeof(autovac_table));
 		tab->at_relid = relid;
 		tab->at_sharedrel = classForm->relisshared;
@@ -2806,13 +2842,8 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			(doanalyze ? VACOPT_ANALYZE : 0) |
 			(!wraparound ? VACOPT_SKIP_LOCKED : 0);
 
-		/*
-		 * index_cleanup and truncate are unspecified at first in autovacuum.
-		 * They will be filled in with usable values using their reloptions
-		 * (or reloption defaults) later.
-		 */
-		tab->at_params.index_cleanup = VACOPTVALUE_UNSPECIFIED;
-		tab->at_params.truncate = VACOPTVALUE_UNSPECIFIED;
+		tab->at_params.index_cleanup = index_cleanup;
+		tab->at_params.truncate = truncate;
 		/* As of now, we don't support parallel vacuum for autovacuum */
 		tab->at_params.nworkers = -1;
 		tab->at_params.freeze_min_age = freeze_min_age;
@@ -2822,12 +2853,7 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		tab->at_params.is_wraparound = wraparound;
 		tab->at_params.log_min_duration = log_min_duration;
 		tab->at_params.toast_parent = InvalidOid;
-
-		/*
-		 * Later, in vacuum_rel(), we check reloptions for any
-		 * vacuum_max_eager_freeze_failure_rate override.
-		 */
-		tab->at_params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+		tab->at_params.max_eager_freeze_failure_rate = max_eager_freeze_failure_rate;
 		tab->at_storage_param_vac_cost_limit = avopts ?
 			avopts->vacuum_cost_limit : 0;
 		tab->at_storage_param_vac_cost_delay = avopts ?
-- 
2.39.5 (Apple Git-154)


--QWBYbd5Ar5k8NvSv
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
	filename=v1-0003-autovac-combine-reloptions-correctly.patch



^ permalink  raw  reply  [nested|flat] 804+ messages in thread

* [PATCH v1 2/4] autovac: resolve relopts before vacuuming
@ 2025-06-23 19:42 Nathan Bossart <[email protected]>
  0 siblings, 0 replies; 804+ messages in thread

From: Nathan Bossart @ 2025-06-23 19:42 UTC (permalink / raw)

---
 src/backend/commands/vacuum.c       |  7 ++--
 src/backend/postmaster/autovacuum.c | 52 +++++++++++++++++++++--------
 2 files changed, 44 insertions(+), 15 deletions(-)

diff --git a/src/backend/commands/vacuum.c b/src/backend/commands/vacuum.c
index 33a33bf6b1c..0015b9ef4b0 100644
--- a/src/backend/commands/vacuum.c
+++ b/src/backend/commands/vacuum.c
@@ -421,7 +421,7 @@ ExecVacuum(ParseState *pstate, VacuumStmt *vacstmt, bool isTopLevel)
 	/*
 	 * Later, in vacuum_rel(), we check if a reloption override was specified.
 	 */
-	params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+	params.max_eager_freeze_failure_rate = -1.0;
 
 	/*
 	 * Create special memory context for cross-transaction storage.
@@ -2195,10 +2195,13 @@ vacuum_rel(Oid relid, RangeVar *relation, VacuumParams *params,
 	 * Check if the vacuum_max_eager_freeze_failure_rate table storage
 	 * parameter was specified. This overrides the GUC value.
 	 */
-	if (rel->rd_options != NULL &&
+	if (params->max_eager_freeze_failure_rate < 0 &&
+		rel->rd_options != NULL &&
 		((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate >= 0)
 		params->max_eager_freeze_failure_rate =
 			((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate;
+	else
+		params->max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
 
 	/*
 	 * Set truncate option based on truncate reloption or GUC if it wasn't
diff --git a/src/backend/postmaster/autovacuum.c b/src/backend/postmaster/autovacuum.c
index f86c9fed853..3bedca971ff 100644
--- a/src/backend/postmaster/autovacuum.c
+++ b/src/backend/postmaster/autovacuum.c
@@ -2758,6 +2758,9 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		int			multixact_freeze_table_age;
 		int			log_min_duration;
 		AutoVacOpts *avopts = (relopts ? &relopts->autovacuum : NULL);
+		VacOptValue index_cleanup;
+		VacOptValue truncate;
+		double		max_eager_freeze_failure_rate;
 
 		/*
 		 * Calculate the vacuum cost parameters and the freeze ages.  If there
@@ -2790,6 +2793,39 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			? avopts->multixact_freeze_table_age
 			: default_multixact_freeze_table_age;
 
+		if (relopts)
+		{
+			switch (relopts->vacuum_index_cleanup)
+			{
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_AUTO:
+					index_cleanup = VACOPTVALUE_AUTO;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_ON:
+					index_cleanup = VACOPTVALUE_ENABLED;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_OFF:
+					index_cleanup = VACOPTVALUE_DISABLED;
+					break;
+			}
+		}
+		else
+			index_cleanup = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_truncate_set)
+		{
+			if (relopts->vacuum_truncate)
+				truncate = VACOPTVALUE_ENABLED;
+			else
+				truncate = VACOPTVALUE_DISABLED;
+		}
+		else
+			truncate = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_max_eager_freeze_failure_rate >= 0)
+			max_eager_freeze_failure_rate = relopts->vacuum_max_eager_freeze_failure_rate;
+		else
+			max_eager_freeze_failure_rate = -1.0;
+
 		tab = palloc(sizeof(autovac_table));
 		tab->at_relid = relid;
 		tab->at_sharedrel = classForm->relisshared;
@@ -2806,13 +2842,8 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			(doanalyze ? VACOPT_ANALYZE : 0) |
 			(!wraparound ? VACOPT_SKIP_LOCKED : 0);
 
-		/*
-		 * index_cleanup and truncate are unspecified at first in autovacuum.
-		 * They will be filled in with usable values using their reloptions
-		 * (or reloption defaults) later.
-		 */
-		tab->at_params.index_cleanup = VACOPTVALUE_UNSPECIFIED;
-		tab->at_params.truncate = VACOPTVALUE_UNSPECIFIED;
+		tab->at_params.index_cleanup = index_cleanup;
+		tab->at_params.truncate = truncate;
 		/* As of now, we don't support parallel vacuum for autovacuum */
 		tab->at_params.nworkers = -1;
 		tab->at_params.freeze_min_age = freeze_min_age;
@@ -2822,12 +2853,7 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		tab->at_params.is_wraparound = wraparound;
 		tab->at_params.log_min_duration = log_min_duration;
 		tab->at_params.toast_parent = InvalidOid;
-
-		/*
-		 * Later, in vacuum_rel(), we check reloptions for any
-		 * vacuum_max_eager_freeze_failure_rate override.
-		 */
-		tab->at_params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+		tab->at_params.max_eager_freeze_failure_rate = max_eager_freeze_failure_rate;
 		tab->at_storage_param_vac_cost_limit = avopts ?
 			avopts->vacuum_cost_limit : 0;
 		tab->at_storage_param_vac_cost_delay = avopts ?
-- 
2.39.5 (Apple Git-154)


--QWBYbd5Ar5k8NvSv
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
	filename=v1-0003-autovac-combine-reloptions-correctly.patch



^ permalink  raw  reply  [nested|flat] 804+ messages in thread

* [PATCH v1 2/4] autovac: resolve relopts before vacuuming
@ 2025-06-23 19:42 Nathan Bossart <[email protected]>
  0 siblings, 0 replies; 804+ messages in thread

From: Nathan Bossart @ 2025-06-23 19:42 UTC (permalink / raw)

---
 src/backend/commands/vacuum.c       |  7 ++--
 src/backend/postmaster/autovacuum.c | 52 +++++++++++++++++++++--------
 2 files changed, 44 insertions(+), 15 deletions(-)

diff --git a/src/backend/commands/vacuum.c b/src/backend/commands/vacuum.c
index 33a33bf6b1c..0015b9ef4b0 100644
--- a/src/backend/commands/vacuum.c
+++ b/src/backend/commands/vacuum.c
@@ -421,7 +421,7 @@ ExecVacuum(ParseState *pstate, VacuumStmt *vacstmt, bool isTopLevel)
 	/*
 	 * Later, in vacuum_rel(), we check if a reloption override was specified.
 	 */
-	params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+	params.max_eager_freeze_failure_rate = -1.0;
 
 	/*
 	 * Create special memory context for cross-transaction storage.
@@ -2195,10 +2195,13 @@ vacuum_rel(Oid relid, RangeVar *relation, VacuumParams *params,
 	 * Check if the vacuum_max_eager_freeze_failure_rate table storage
 	 * parameter was specified. This overrides the GUC value.
 	 */
-	if (rel->rd_options != NULL &&
+	if (params->max_eager_freeze_failure_rate < 0 &&
+		rel->rd_options != NULL &&
 		((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate >= 0)
 		params->max_eager_freeze_failure_rate =
 			((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate;
+	else
+		params->max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
 
 	/*
 	 * Set truncate option based on truncate reloption or GUC if it wasn't
diff --git a/src/backend/postmaster/autovacuum.c b/src/backend/postmaster/autovacuum.c
index f86c9fed853..3bedca971ff 100644
--- a/src/backend/postmaster/autovacuum.c
+++ b/src/backend/postmaster/autovacuum.c
@@ -2758,6 +2758,9 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		int			multixact_freeze_table_age;
 		int			log_min_duration;
 		AutoVacOpts *avopts = (relopts ? &relopts->autovacuum : NULL);
+		VacOptValue index_cleanup;
+		VacOptValue truncate;
+		double		max_eager_freeze_failure_rate;
 
 		/*
 		 * Calculate the vacuum cost parameters and the freeze ages.  If there
@@ -2790,6 +2793,39 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			? avopts->multixact_freeze_table_age
 			: default_multixact_freeze_table_age;
 
+		if (relopts)
+		{
+			switch (relopts->vacuum_index_cleanup)
+			{
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_AUTO:
+					index_cleanup = VACOPTVALUE_AUTO;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_ON:
+					index_cleanup = VACOPTVALUE_ENABLED;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_OFF:
+					index_cleanup = VACOPTVALUE_DISABLED;
+					break;
+			}
+		}
+		else
+			index_cleanup = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_truncate_set)
+		{
+			if (relopts->vacuum_truncate)
+				truncate = VACOPTVALUE_ENABLED;
+			else
+				truncate = VACOPTVALUE_DISABLED;
+		}
+		else
+			truncate = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_max_eager_freeze_failure_rate >= 0)
+			max_eager_freeze_failure_rate = relopts->vacuum_max_eager_freeze_failure_rate;
+		else
+			max_eager_freeze_failure_rate = -1.0;
+
 		tab = palloc(sizeof(autovac_table));
 		tab->at_relid = relid;
 		tab->at_sharedrel = classForm->relisshared;
@@ -2806,13 +2842,8 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			(doanalyze ? VACOPT_ANALYZE : 0) |
 			(!wraparound ? VACOPT_SKIP_LOCKED : 0);
 
-		/*
-		 * index_cleanup and truncate are unspecified at first in autovacuum.
-		 * They will be filled in with usable values using their reloptions
-		 * (or reloption defaults) later.
-		 */
-		tab->at_params.index_cleanup = VACOPTVALUE_UNSPECIFIED;
-		tab->at_params.truncate = VACOPTVALUE_UNSPECIFIED;
+		tab->at_params.index_cleanup = index_cleanup;
+		tab->at_params.truncate = truncate;
 		/* As of now, we don't support parallel vacuum for autovacuum */
 		tab->at_params.nworkers = -1;
 		tab->at_params.freeze_min_age = freeze_min_age;
@@ -2822,12 +2853,7 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		tab->at_params.is_wraparound = wraparound;
 		tab->at_params.log_min_duration = log_min_duration;
 		tab->at_params.toast_parent = InvalidOid;
-
-		/*
-		 * Later, in vacuum_rel(), we check reloptions for any
-		 * vacuum_max_eager_freeze_failure_rate override.
-		 */
-		tab->at_params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+		tab->at_params.max_eager_freeze_failure_rate = max_eager_freeze_failure_rate;
 		tab->at_storage_param_vac_cost_limit = avopts ?
 			avopts->vacuum_cost_limit : 0;
 		tab->at_storage_param_vac_cost_delay = avopts ?
-- 
2.39.5 (Apple Git-154)


--QWBYbd5Ar5k8NvSv
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
	filename=v1-0003-autovac-combine-reloptions-correctly.patch



^ permalink  raw  reply  [nested|flat] 804+ messages in thread

* [PATCH v1 2/4] autovac: resolve relopts before vacuuming
@ 2025-06-23 19:42 Nathan Bossart <[email protected]>
  0 siblings, 0 replies; 804+ messages in thread

From: Nathan Bossart @ 2025-06-23 19:42 UTC (permalink / raw)

---
 src/backend/commands/vacuum.c       |  7 ++--
 src/backend/postmaster/autovacuum.c | 52 +++++++++++++++++++++--------
 2 files changed, 44 insertions(+), 15 deletions(-)

diff --git a/src/backend/commands/vacuum.c b/src/backend/commands/vacuum.c
index 33a33bf6b1c..0015b9ef4b0 100644
--- a/src/backend/commands/vacuum.c
+++ b/src/backend/commands/vacuum.c
@@ -421,7 +421,7 @@ ExecVacuum(ParseState *pstate, VacuumStmt *vacstmt, bool isTopLevel)
 	/*
 	 * Later, in vacuum_rel(), we check if a reloption override was specified.
 	 */
-	params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+	params.max_eager_freeze_failure_rate = -1.0;
 
 	/*
 	 * Create special memory context for cross-transaction storage.
@@ -2195,10 +2195,13 @@ vacuum_rel(Oid relid, RangeVar *relation, VacuumParams *params,
 	 * Check if the vacuum_max_eager_freeze_failure_rate table storage
 	 * parameter was specified. This overrides the GUC value.
 	 */
-	if (rel->rd_options != NULL &&
+	if (params->max_eager_freeze_failure_rate < 0 &&
+		rel->rd_options != NULL &&
 		((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate >= 0)
 		params->max_eager_freeze_failure_rate =
 			((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate;
+	else
+		params->max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
 
 	/*
 	 * Set truncate option based on truncate reloption or GUC if it wasn't
diff --git a/src/backend/postmaster/autovacuum.c b/src/backend/postmaster/autovacuum.c
index f86c9fed853..3bedca971ff 100644
--- a/src/backend/postmaster/autovacuum.c
+++ b/src/backend/postmaster/autovacuum.c
@@ -2758,6 +2758,9 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		int			multixact_freeze_table_age;
 		int			log_min_duration;
 		AutoVacOpts *avopts = (relopts ? &relopts->autovacuum : NULL);
+		VacOptValue index_cleanup;
+		VacOptValue truncate;
+		double		max_eager_freeze_failure_rate;
 
 		/*
 		 * Calculate the vacuum cost parameters and the freeze ages.  If there
@@ -2790,6 +2793,39 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			? avopts->multixact_freeze_table_age
 			: default_multixact_freeze_table_age;
 
+		if (relopts)
+		{
+			switch (relopts->vacuum_index_cleanup)
+			{
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_AUTO:
+					index_cleanup = VACOPTVALUE_AUTO;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_ON:
+					index_cleanup = VACOPTVALUE_ENABLED;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_OFF:
+					index_cleanup = VACOPTVALUE_DISABLED;
+					break;
+			}
+		}
+		else
+			index_cleanup = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_truncate_set)
+		{
+			if (relopts->vacuum_truncate)
+				truncate = VACOPTVALUE_ENABLED;
+			else
+				truncate = VACOPTVALUE_DISABLED;
+		}
+		else
+			truncate = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_max_eager_freeze_failure_rate >= 0)
+			max_eager_freeze_failure_rate = relopts->vacuum_max_eager_freeze_failure_rate;
+		else
+			max_eager_freeze_failure_rate = -1.0;
+
 		tab = palloc(sizeof(autovac_table));
 		tab->at_relid = relid;
 		tab->at_sharedrel = classForm->relisshared;
@@ -2806,13 +2842,8 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			(doanalyze ? VACOPT_ANALYZE : 0) |
 			(!wraparound ? VACOPT_SKIP_LOCKED : 0);
 
-		/*
-		 * index_cleanup and truncate are unspecified at first in autovacuum.
-		 * They will be filled in with usable values using their reloptions
-		 * (or reloption defaults) later.
-		 */
-		tab->at_params.index_cleanup = VACOPTVALUE_UNSPECIFIED;
-		tab->at_params.truncate = VACOPTVALUE_UNSPECIFIED;
+		tab->at_params.index_cleanup = index_cleanup;
+		tab->at_params.truncate = truncate;
 		/* As of now, we don't support parallel vacuum for autovacuum */
 		tab->at_params.nworkers = -1;
 		tab->at_params.freeze_min_age = freeze_min_age;
@@ -2822,12 +2853,7 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		tab->at_params.is_wraparound = wraparound;
 		tab->at_params.log_min_duration = log_min_duration;
 		tab->at_params.toast_parent = InvalidOid;
-
-		/*
-		 * Later, in vacuum_rel(), we check reloptions for any
-		 * vacuum_max_eager_freeze_failure_rate override.
-		 */
-		tab->at_params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+		tab->at_params.max_eager_freeze_failure_rate = max_eager_freeze_failure_rate;
 		tab->at_storage_param_vac_cost_limit = avopts ?
 			avopts->vacuum_cost_limit : 0;
 		tab->at_storage_param_vac_cost_delay = avopts ?
-- 
2.39.5 (Apple Git-154)


--QWBYbd5Ar5k8NvSv
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
	filename=v1-0003-autovac-combine-reloptions-correctly.patch



^ permalink  raw  reply  [nested|flat] 804+ messages in thread

* [PATCH v1 2/4] autovac: resolve relopts before vacuuming
@ 2025-06-23 19:42 Nathan Bossart <[email protected]>
  0 siblings, 0 replies; 804+ messages in thread

From: Nathan Bossart @ 2025-06-23 19:42 UTC (permalink / raw)

---
 src/backend/commands/vacuum.c       |  7 ++--
 src/backend/postmaster/autovacuum.c | 52 +++++++++++++++++++++--------
 2 files changed, 44 insertions(+), 15 deletions(-)

diff --git a/src/backend/commands/vacuum.c b/src/backend/commands/vacuum.c
index 33a33bf6b1c..0015b9ef4b0 100644
--- a/src/backend/commands/vacuum.c
+++ b/src/backend/commands/vacuum.c
@@ -421,7 +421,7 @@ ExecVacuum(ParseState *pstate, VacuumStmt *vacstmt, bool isTopLevel)
 	/*
 	 * Later, in vacuum_rel(), we check if a reloption override was specified.
 	 */
-	params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+	params.max_eager_freeze_failure_rate = -1.0;
 
 	/*
 	 * Create special memory context for cross-transaction storage.
@@ -2195,10 +2195,13 @@ vacuum_rel(Oid relid, RangeVar *relation, VacuumParams *params,
 	 * Check if the vacuum_max_eager_freeze_failure_rate table storage
 	 * parameter was specified. This overrides the GUC value.
 	 */
-	if (rel->rd_options != NULL &&
+	if (params->max_eager_freeze_failure_rate < 0 &&
+		rel->rd_options != NULL &&
 		((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate >= 0)
 		params->max_eager_freeze_failure_rate =
 			((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate;
+	else
+		params->max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
 
 	/*
 	 * Set truncate option based on truncate reloption or GUC if it wasn't
diff --git a/src/backend/postmaster/autovacuum.c b/src/backend/postmaster/autovacuum.c
index f86c9fed853..3bedca971ff 100644
--- a/src/backend/postmaster/autovacuum.c
+++ b/src/backend/postmaster/autovacuum.c
@@ -2758,6 +2758,9 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		int			multixact_freeze_table_age;
 		int			log_min_duration;
 		AutoVacOpts *avopts = (relopts ? &relopts->autovacuum : NULL);
+		VacOptValue index_cleanup;
+		VacOptValue truncate;
+		double		max_eager_freeze_failure_rate;
 
 		/*
 		 * Calculate the vacuum cost parameters and the freeze ages.  If there
@@ -2790,6 +2793,39 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			? avopts->multixact_freeze_table_age
 			: default_multixact_freeze_table_age;
 
+		if (relopts)
+		{
+			switch (relopts->vacuum_index_cleanup)
+			{
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_AUTO:
+					index_cleanup = VACOPTVALUE_AUTO;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_ON:
+					index_cleanup = VACOPTVALUE_ENABLED;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_OFF:
+					index_cleanup = VACOPTVALUE_DISABLED;
+					break;
+			}
+		}
+		else
+			index_cleanup = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_truncate_set)
+		{
+			if (relopts->vacuum_truncate)
+				truncate = VACOPTVALUE_ENABLED;
+			else
+				truncate = VACOPTVALUE_DISABLED;
+		}
+		else
+			truncate = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_max_eager_freeze_failure_rate >= 0)
+			max_eager_freeze_failure_rate = relopts->vacuum_max_eager_freeze_failure_rate;
+		else
+			max_eager_freeze_failure_rate = -1.0;
+
 		tab = palloc(sizeof(autovac_table));
 		tab->at_relid = relid;
 		tab->at_sharedrel = classForm->relisshared;
@@ -2806,13 +2842,8 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			(doanalyze ? VACOPT_ANALYZE : 0) |
 			(!wraparound ? VACOPT_SKIP_LOCKED : 0);
 
-		/*
-		 * index_cleanup and truncate are unspecified at first in autovacuum.
-		 * They will be filled in with usable values using their reloptions
-		 * (or reloption defaults) later.
-		 */
-		tab->at_params.index_cleanup = VACOPTVALUE_UNSPECIFIED;
-		tab->at_params.truncate = VACOPTVALUE_UNSPECIFIED;
+		tab->at_params.index_cleanup = index_cleanup;
+		tab->at_params.truncate = truncate;
 		/* As of now, we don't support parallel vacuum for autovacuum */
 		tab->at_params.nworkers = -1;
 		tab->at_params.freeze_min_age = freeze_min_age;
@@ -2822,12 +2853,7 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		tab->at_params.is_wraparound = wraparound;
 		tab->at_params.log_min_duration = log_min_duration;
 		tab->at_params.toast_parent = InvalidOid;
-
-		/*
-		 * Later, in vacuum_rel(), we check reloptions for any
-		 * vacuum_max_eager_freeze_failure_rate override.
-		 */
-		tab->at_params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+		tab->at_params.max_eager_freeze_failure_rate = max_eager_freeze_failure_rate;
 		tab->at_storage_param_vac_cost_limit = avopts ?
 			avopts->vacuum_cost_limit : 0;
 		tab->at_storage_param_vac_cost_delay = avopts ?
-- 
2.39.5 (Apple Git-154)


--QWBYbd5Ar5k8NvSv
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
	filename=v1-0003-autovac-combine-reloptions-correctly.patch



^ permalink  raw  reply  [nested|flat] 804+ messages in thread

* [PATCH v1 2/4] autovac: resolve relopts before vacuuming
@ 2025-06-23 19:42 Nathan Bossart <[email protected]>
  0 siblings, 0 replies; 804+ messages in thread

From: Nathan Bossart @ 2025-06-23 19:42 UTC (permalink / raw)

---
 src/backend/commands/vacuum.c       |  7 ++--
 src/backend/postmaster/autovacuum.c | 52 +++++++++++++++++++++--------
 2 files changed, 44 insertions(+), 15 deletions(-)

diff --git a/src/backend/commands/vacuum.c b/src/backend/commands/vacuum.c
index 33a33bf6b1c..0015b9ef4b0 100644
--- a/src/backend/commands/vacuum.c
+++ b/src/backend/commands/vacuum.c
@@ -421,7 +421,7 @@ ExecVacuum(ParseState *pstate, VacuumStmt *vacstmt, bool isTopLevel)
 	/*
 	 * Later, in vacuum_rel(), we check if a reloption override was specified.
 	 */
-	params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+	params.max_eager_freeze_failure_rate = -1.0;
 
 	/*
 	 * Create special memory context for cross-transaction storage.
@@ -2195,10 +2195,13 @@ vacuum_rel(Oid relid, RangeVar *relation, VacuumParams *params,
 	 * Check if the vacuum_max_eager_freeze_failure_rate table storage
 	 * parameter was specified. This overrides the GUC value.
 	 */
-	if (rel->rd_options != NULL &&
+	if (params->max_eager_freeze_failure_rate < 0 &&
+		rel->rd_options != NULL &&
 		((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate >= 0)
 		params->max_eager_freeze_failure_rate =
 			((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate;
+	else
+		params->max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
 
 	/*
 	 * Set truncate option based on truncate reloption or GUC if it wasn't
diff --git a/src/backend/postmaster/autovacuum.c b/src/backend/postmaster/autovacuum.c
index f86c9fed853..3bedca971ff 100644
--- a/src/backend/postmaster/autovacuum.c
+++ b/src/backend/postmaster/autovacuum.c
@@ -2758,6 +2758,9 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		int			multixact_freeze_table_age;
 		int			log_min_duration;
 		AutoVacOpts *avopts = (relopts ? &relopts->autovacuum : NULL);
+		VacOptValue index_cleanup;
+		VacOptValue truncate;
+		double		max_eager_freeze_failure_rate;
 
 		/*
 		 * Calculate the vacuum cost parameters and the freeze ages.  If there
@@ -2790,6 +2793,39 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			? avopts->multixact_freeze_table_age
 			: default_multixact_freeze_table_age;
 
+		if (relopts)
+		{
+			switch (relopts->vacuum_index_cleanup)
+			{
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_AUTO:
+					index_cleanup = VACOPTVALUE_AUTO;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_ON:
+					index_cleanup = VACOPTVALUE_ENABLED;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_OFF:
+					index_cleanup = VACOPTVALUE_DISABLED;
+					break;
+			}
+		}
+		else
+			index_cleanup = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_truncate_set)
+		{
+			if (relopts->vacuum_truncate)
+				truncate = VACOPTVALUE_ENABLED;
+			else
+				truncate = VACOPTVALUE_DISABLED;
+		}
+		else
+			truncate = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_max_eager_freeze_failure_rate >= 0)
+			max_eager_freeze_failure_rate = relopts->vacuum_max_eager_freeze_failure_rate;
+		else
+			max_eager_freeze_failure_rate = -1.0;
+
 		tab = palloc(sizeof(autovac_table));
 		tab->at_relid = relid;
 		tab->at_sharedrel = classForm->relisshared;
@@ -2806,13 +2842,8 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			(doanalyze ? VACOPT_ANALYZE : 0) |
 			(!wraparound ? VACOPT_SKIP_LOCKED : 0);
 
-		/*
-		 * index_cleanup and truncate are unspecified at first in autovacuum.
-		 * They will be filled in with usable values using their reloptions
-		 * (or reloption defaults) later.
-		 */
-		tab->at_params.index_cleanup = VACOPTVALUE_UNSPECIFIED;
-		tab->at_params.truncate = VACOPTVALUE_UNSPECIFIED;
+		tab->at_params.index_cleanup = index_cleanup;
+		tab->at_params.truncate = truncate;
 		/* As of now, we don't support parallel vacuum for autovacuum */
 		tab->at_params.nworkers = -1;
 		tab->at_params.freeze_min_age = freeze_min_age;
@@ -2822,12 +2853,7 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		tab->at_params.is_wraparound = wraparound;
 		tab->at_params.log_min_duration = log_min_duration;
 		tab->at_params.toast_parent = InvalidOid;
-
-		/*
-		 * Later, in vacuum_rel(), we check reloptions for any
-		 * vacuum_max_eager_freeze_failure_rate override.
-		 */
-		tab->at_params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+		tab->at_params.max_eager_freeze_failure_rate = max_eager_freeze_failure_rate;
 		tab->at_storage_param_vac_cost_limit = avopts ?
 			avopts->vacuum_cost_limit : 0;
 		tab->at_storage_param_vac_cost_delay = avopts ?
-- 
2.39.5 (Apple Git-154)


--QWBYbd5Ar5k8NvSv
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
	filename=v1-0003-autovac-combine-reloptions-correctly.patch



^ permalink  raw  reply  [nested|flat] 804+ messages in thread

* [PATCH v1 2/4] autovac: resolve relopts before vacuuming
@ 2025-06-23 19:42 Nathan Bossart <[email protected]>
  0 siblings, 0 replies; 804+ messages in thread

From: Nathan Bossart @ 2025-06-23 19:42 UTC (permalink / raw)

---
 src/backend/commands/vacuum.c       |  7 ++--
 src/backend/postmaster/autovacuum.c | 52 +++++++++++++++++++++--------
 2 files changed, 44 insertions(+), 15 deletions(-)

diff --git a/src/backend/commands/vacuum.c b/src/backend/commands/vacuum.c
index 33a33bf6b1c..0015b9ef4b0 100644
--- a/src/backend/commands/vacuum.c
+++ b/src/backend/commands/vacuum.c
@@ -421,7 +421,7 @@ ExecVacuum(ParseState *pstate, VacuumStmt *vacstmt, bool isTopLevel)
 	/*
 	 * Later, in vacuum_rel(), we check if a reloption override was specified.
 	 */
-	params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+	params.max_eager_freeze_failure_rate = -1.0;
 
 	/*
 	 * Create special memory context for cross-transaction storage.
@@ -2195,10 +2195,13 @@ vacuum_rel(Oid relid, RangeVar *relation, VacuumParams *params,
 	 * Check if the vacuum_max_eager_freeze_failure_rate table storage
 	 * parameter was specified. This overrides the GUC value.
 	 */
-	if (rel->rd_options != NULL &&
+	if (params->max_eager_freeze_failure_rate < 0 &&
+		rel->rd_options != NULL &&
 		((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate >= 0)
 		params->max_eager_freeze_failure_rate =
 			((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate;
+	else
+		params->max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
 
 	/*
 	 * Set truncate option based on truncate reloption or GUC if it wasn't
diff --git a/src/backend/postmaster/autovacuum.c b/src/backend/postmaster/autovacuum.c
index f86c9fed853..3bedca971ff 100644
--- a/src/backend/postmaster/autovacuum.c
+++ b/src/backend/postmaster/autovacuum.c
@@ -2758,6 +2758,9 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		int			multixact_freeze_table_age;
 		int			log_min_duration;
 		AutoVacOpts *avopts = (relopts ? &relopts->autovacuum : NULL);
+		VacOptValue index_cleanup;
+		VacOptValue truncate;
+		double		max_eager_freeze_failure_rate;
 
 		/*
 		 * Calculate the vacuum cost parameters and the freeze ages.  If there
@@ -2790,6 +2793,39 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			? avopts->multixact_freeze_table_age
 			: default_multixact_freeze_table_age;
 
+		if (relopts)
+		{
+			switch (relopts->vacuum_index_cleanup)
+			{
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_AUTO:
+					index_cleanup = VACOPTVALUE_AUTO;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_ON:
+					index_cleanup = VACOPTVALUE_ENABLED;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_OFF:
+					index_cleanup = VACOPTVALUE_DISABLED;
+					break;
+			}
+		}
+		else
+			index_cleanup = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_truncate_set)
+		{
+			if (relopts->vacuum_truncate)
+				truncate = VACOPTVALUE_ENABLED;
+			else
+				truncate = VACOPTVALUE_DISABLED;
+		}
+		else
+			truncate = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_max_eager_freeze_failure_rate >= 0)
+			max_eager_freeze_failure_rate = relopts->vacuum_max_eager_freeze_failure_rate;
+		else
+			max_eager_freeze_failure_rate = -1.0;
+
 		tab = palloc(sizeof(autovac_table));
 		tab->at_relid = relid;
 		tab->at_sharedrel = classForm->relisshared;
@@ -2806,13 +2842,8 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			(doanalyze ? VACOPT_ANALYZE : 0) |
 			(!wraparound ? VACOPT_SKIP_LOCKED : 0);
 
-		/*
-		 * index_cleanup and truncate are unspecified at first in autovacuum.
-		 * They will be filled in with usable values using their reloptions
-		 * (or reloption defaults) later.
-		 */
-		tab->at_params.index_cleanup = VACOPTVALUE_UNSPECIFIED;
-		tab->at_params.truncate = VACOPTVALUE_UNSPECIFIED;
+		tab->at_params.index_cleanup = index_cleanup;
+		tab->at_params.truncate = truncate;
 		/* As of now, we don't support parallel vacuum for autovacuum */
 		tab->at_params.nworkers = -1;
 		tab->at_params.freeze_min_age = freeze_min_age;
@@ -2822,12 +2853,7 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		tab->at_params.is_wraparound = wraparound;
 		tab->at_params.log_min_duration = log_min_duration;
 		tab->at_params.toast_parent = InvalidOid;
-
-		/*
-		 * Later, in vacuum_rel(), we check reloptions for any
-		 * vacuum_max_eager_freeze_failure_rate override.
-		 */
-		tab->at_params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+		tab->at_params.max_eager_freeze_failure_rate = max_eager_freeze_failure_rate;
 		tab->at_storage_param_vac_cost_limit = avopts ?
 			avopts->vacuum_cost_limit : 0;
 		tab->at_storage_param_vac_cost_delay = avopts ?
-- 
2.39.5 (Apple Git-154)


--QWBYbd5Ar5k8NvSv
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
	filename=v1-0003-autovac-combine-reloptions-correctly.patch



^ permalink  raw  reply  [nested|flat] 804+ messages in thread

* [PATCH v1 2/4] autovac: resolve relopts before vacuuming
@ 2025-06-23 19:42 Nathan Bossart <[email protected]>
  0 siblings, 0 replies; 804+ messages in thread

From: Nathan Bossart @ 2025-06-23 19:42 UTC (permalink / raw)

---
 src/backend/commands/vacuum.c       |  7 ++--
 src/backend/postmaster/autovacuum.c | 52 +++++++++++++++++++++--------
 2 files changed, 44 insertions(+), 15 deletions(-)

diff --git a/src/backend/commands/vacuum.c b/src/backend/commands/vacuum.c
index 33a33bf6b1c..0015b9ef4b0 100644
--- a/src/backend/commands/vacuum.c
+++ b/src/backend/commands/vacuum.c
@@ -421,7 +421,7 @@ ExecVacuum(ParseState *pstate, VacuumStmt *vacstmt, bool isTopLevel)
 	/*
 	 * Later, in vacuum_rel(), we check if a reloption override was specified.
 	 */
-	params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+	params.max_eager_freeze_failure_rate = -1.0;
 
 	/*
 	 * Create special memory context for cross-transaction storage.
@@ -2195,10 +2195,13 @@ vacuum_rel(Oid relid, RangeVar *relation, VacuumParams *params,
 	 * Check if the vacuum_max_eager_freeze_failure_rate table storage
 	 * parameter was specified. This overrides the GUC value.
 	 */
-	if (rel->rd_options != NULL &&
+	if (params->max_eager_freeze_failure_rate < 0 &&
+		rel->rd_options != NULL &&
 		((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate >= 0)
 		params->max_eager_freeze_failure_rate =
 			((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate;
+	else
+		params->max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
 
 	/*
 	 * Set truncate option based on truncate reloption or GUC if it wasn't
diff --git a/src/backend/postmaster/autovacuum.c b/src/backend/postmaster/autovacuum.c
index f86c9fed853..3bedca971ff 100644
--- a/src/backend/postmaster/autovacuum.c
+++ b/src/backend/postmaster/autovacuum.c
@@ -2758,6 +2758,9 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		int			multixact_freeze_table_age;
 		int			log_min_duration;
 		AutoVacOpts *avopts = (relopts ? &relopts->autovacuum : NULL);
+		VacOptValue index_cleanup;
+		VacOptValue truncate;
+		double		max_eager_freeze_failure_rate;
 
 		/*
 		 * Calculate the vacuum cost parameters and the freeze ages.  If there
@@ -2790,6 +2793,39 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			? avopts->multixact_freeze_table_age
 			: default_multixact_freeze_table_age;
 
+		if (relopts)
+		{
+			switch (relopts->vacuum_index_cleanup)
+			{
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_AUTO:
+					index_cleanup = VACOPTVALUE_AUTO;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_ON:
+					index_cleanup = VACOPTVALUE_ENABLED;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_OFF:
+					index_cleanup = VACOPTVALUE_DISABLED;
+					break;
+			}
+		}
+		else
+			index_cleanup = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_truncate_set)
+		{
+			if (relopts->vacuum_truncate)
+				truncate = VACOPTVALUE_ENABLED;
+			else
+				truncate = VACOPTVALUE_DISABLED;
+		}
+		else
+			truncate = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_max_eager_freeze_failure_rate >= 0)
+			max_eager_freeze_failure_rate = relopts->vacuum_max_eager_freeze_failure_rate;
+		else
+			max_eager_freeze_failure_rate = -1.0;
+
 		tab = palloc(sizeof(autovac_table));
 		tab->at_relid = relid;
 		tab->at_sharedrel = classForm->relisshared;
@@ -2806,13 +2842,8 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			(doanalyze ? VACOPT_ANALYZE : 0) |
 			(!wraparound ? VACOPT_SKIP_LOCKED : 0);
 
-		/*
-		 * index_cleanup and truncate are unspecified at first in autovacuum.
-		 * They will be filled in with usable values using their reloptions
-		 * (or reloption defaults) later.
-		 */
-		tab->at_params.index_cleanup = VACOPTVALUE_UNSPECIFIED;
-		tab->at_params.truncate = VACOPTVALUE_UNSPECIFIED;
+		tab->at_params.index_cleanup = index_cleanup;
+		tab->at_params.truncate = truncate;
 		/* As of now, we don't support parallel vacuum for autovacuum */
 		tab->at_params.nworkers = -1;
 		tab->at_params.freeze_min_age = freeze_min_age;
@@ -2822,12 +2853,7 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		tab->at_params.is_wraparound = wraparound;
 		tab->at_params.log_min_duration = log_min_duration;
 		tab->at_params.toast_parent = InvalidOid;
-
-		/*
-		 * Later, in vacuum_rel(), we check reloptions for any
-		 * vacuum_max_eager_freeze_failure_rate override.
-		 */
-		tab->at_params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+		tab->at_params.max_eager_freeze_failure_rate = max_eager_freeze_failure_rate;
 		tab->at_storage_param_vac_cost_limit = avopts ?
 			avopts->vacuum_cost_limit : 0;
 		tab->at_storage_param_vac_cost_delay = avopts ?
-- 
2.39.5 (Apple Git-154)


--QWBYbd5Ar5k8NvSv
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
	filename=v1-0003-autovac-combine-reloptions-correctly.patch



^ permalink  raw  reply  [nested|flat] 804+ messages in thread

* [PATCH v1 2/4] autovac: resolve relopts before vacuuming
@ 2025-06-23 19:42 Nathan Bossart <[email protected]>
  0 siblings, 0 replies; 804+ messages in thread

From: Nathan Bossart @ 2025-06-23 19:42 UTC (permalink / raw)

---
 src/backend/commands/vacuum.c       |  7 ++--
 src/backend/postmaster/autovacuum.c | 52 +++++++++++++++++++++--------
 2 files changed, 44 insertions(+), 15 deletions(-)

diff --git a/src/backend/commands/vacuum.c b/src/backend/commands/vacuum.c
index 33a33bf6b1c..0015b9ef4b0 100644
--- a/src/backend/commands/vacuum.c
+++ b/src/backend/commands/vacuum.c
@@ -421,7 +421,7 @@ ExecVacuum(ParseState *pstate, VacuumStmt *vacstmt, bool isTopLevel)
 	/*
 	 * Later, in vacuum_rel(), we check if a reloption override was specified.
 	 */
-	params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+	params.max_eager_freeze_failure_rate = -1.0;
 
 	/*
 	 * Create special memory context for cross-transaction storage.
@@ -2195,10 +2195,13 @@ vacuum_rel(Oid relid, RangeVar *relation, VacuumParams *params,
 	 * Check if the vacuum_max_eager_freeze_failure_rate table storage
 	 * parameter was specified. This overrides the GUC value.
 	 */
-	if (rel->rd_options != NULL &&
+	if (params->max_eager_freeze_failure_rate < 0 &&
+		rel->rd_options != NULL &&
 		((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate >= 0)
 		params->max_eager_freeze_failure_rate =
 			((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate;
+	else
+		params->max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
 
 	/*
 	 * Set truncate option based on truncate reloption or GUC if it wasn't
diff --git a/src/backend/postmaster/autovacuum.c b/src/backend/postmaster/autovacuum.c
index f86c9fed853..3bedca971ff 100644
--- a/src/backend/postmaster/autovacuum.c
+++ b/src/backend/postmaster/autovacuum.c
@@ -2758,6 +2758,9 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		int			multixact_freeze_table_age;
 		int			log_min_duration;
 		AutoVacOpts *avopts = (relopts ? &relopts->autovacuum : NULL);
+		VacOptValue index_cleanup;
+		VacOptValue truncate;
+		double		max_eager_freeze_failure_rate;
 
 		/*
 		 * Calculate the vacuum cost parameters and the freeze ages.  If there
@@ -2790,6 +2793,39 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			? avopts->multixact_freeze_table_age
 			: default_multixact_freeze_table_age;
 
+		if (relopts)
+		{
+			switch (relopts->vacuum_index_cleanup)
+			{
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_AUTO:
+					index_cleanup = VACOPTVALUE_AUTO;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_ON:
+					index_cleanup = VACOPTVALUE_ENABLED;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_OFF:
+					index_cleanup = VACOPTVALUE_DISABLED;
+					break;
+			}
+		}
+		else
+			index_cleanup = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_truncate_set)
+		{
+			if (relopts->vacuum_truncate)
+				truncate = VACOPTVALUE_ENABLED;
+			else
+				truncate = VACOPTVALUE_DISABLED;
+		}
+		else
+			truncate = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_max_eager_freeze_failure_rate >= 0)
+			max_eager_freeze_failure_rate = relopts->vacuum_max_eager_freeze_failure_rate;
+		else
+			max_eager_freeze_failure_rate = -1.0;
+
 		tab = palloc(sizeof(autovac_table));
 		tab->at_relid = relid;
 		tab->at_sharedrel = classForm->relisshared;
@@ -2806,13 +2842,8 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			(doanalyze ? VACOPT_ANALYZE : 0) |
 			(!wraparound ? VACOPT_SKIP_LOCKED : 0);
 
-		/*
-		 * index_cleanup and truncate are unspecified at first in autovacuum.
-		 * They will be filled in with usable values using their reloptions
-		 * (or reloption defaults) later.
-		 */
-		tab->at_params.index_cleanup = VACOPTVALUE_UNSPECIFIED;
-		tab->at_params.truncate = VACOPTVALUE_UNSPECIFIED;
+		tab->at_params.index_cleanup = index_cleanup;
+		tab->at_params.truncate = truncate;
 		/* As of now, we don't support parallel vacuum for autovacuum */
 		tab->at_params.nworkers = -1;
 		tab->at_params.freeze_min_age = freeze_min_age;
@@ -2822,12 +2853,7 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		tab->at_params.is_wraparound = wraparound;
 		tab->at_params.log_min_duration = log_min_duration;
 		tab->at_params.toast_parent = InvalidOid;
-
-		/*
-		 * Later, in vacuum_rel(), we check reloptions for any
-		 * vacuum_max_eager_freeze_failure_rate override.
-		 */
-		tab->at_params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+		tab->at_params.max_eager_freeze_failure_rate = max_eager_freeze_failure_rate;
 		tab->at_storage_param_vac_cost_limit = avopts ?
 			avopts->vacuum_cost_limit : 0;
 		tab->at_storage_param_vac_cost_delay = avopts ?
-- 
2.39.5 (Apple Git-154)


--QWBYbd5Ar5k8NvSv
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
	filename=v1-0003-autovac-combine-reloptions-correctly.patch



^ permalink  raw  reply  [nested|flat] 804+ messages in thread

* [PATCH v1 2/4] autovac: resolve relopts before vacuuming
@ 2025-06-23 19:42 Nathan Bossart <[email protected]>
  0 siblings, 0 replies; 804+ messages in thread

From: Nathan Bossart @ 2025-06-23 19:42 UTC (permalink / raw)

---
 src/backend/commands/vacuum.c       |  7 ++--
 src/backend/postmaster/autovacuum.c | 52 +++++++++++++++++++++--------
 2 files changed, 44 insertions(+), 15 deletions(-)

diff --git a/src/backend/commands/vacuum.c b/src/backend/commands/vacuum.c
index 33a33bf6b1c..0015b9ef4b0 100644
--- a/src/backend/commands/vacuum.c
+++ b/src/backend/commands/vacuum.c
@@ -421,7 +421,7 @@ ExecVacuum(ParseState *pstate, VacuumStmt *vacstmt, bool isTopLevel)
 	/*
 	 * Later, in vacuum_rel(), we check if a reloption override was specified.
 	 */
-	params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+	params.max_eager_freeze_failure_rate = -1.0;
 
 	/*
 	 * Create special memory context for cross-transaction storage.
@@ -2195,10 +2195,13 @@ vacuum_rel(Oid relid, RangeVar *relation, VacuumParams *params,
 	 * Check if the vacuum_max_eager_freeze_failure_rate table storage
 	 * parameter was specified. This overrides the GUC value.
 	 */
-	if (rel->rd_options != NULL &&
+	if (params->max_eager_freeze_failure_rate < 0 &&
+		rel->rd_options != NULL &&
 		((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate >= 0)
 		params->max_eager_freeze_failure_rate =
 			((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate;
+	else
+		params->max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
 
 	/*
 	 * Set truncate option based on truncate reloption or GUC if it wasn't
diff --git a/src/backend/postmaster/autovacuum.c b/src/backend/postmaster/autovacuum.c
index f86c9fed853..3bedca971ff 100644
--- a/src/backend/postmaster/autovacuum.c
+++ b/src/backend/postmaster/autovacuum.c
@@ -2758,6 +2758,9 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		int			multixact_freeze_table_age;
 		int			log_min_duration;
 		AutoVacOpts *avopts = (relopts ? &relopts->autovacuum : NULL);
+		VacOptValue index_cleanup;
+		VacOptValue truncate;
+		double		max_eager_freeze_failure_rate;
 
 		/*
 		 * Calculate the vacuum cost parameters and the freeze ages.  If there
@@ -2790,6 +2793,39 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			? avopts->multixact_freeze_table_age
 			: default_multixact_freeze_table_age;
 
+		if (relopts)
+		{
+			switch (relopts->vacuum_index_cleanup)
+			{
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_AUTO:
+					index_cleanup = VACOPTVALUE_AUTO;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_ON:
+					index_cleanup = VACOPTVALUE_ENABLED;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_OFF:
+					index_cleanup = VACOPTVALUE_DISABLED;
+					break;
+			}
+		}
+		else
+			index_cleanup = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_truncate_set)
+		{
+			if (relopts->vacuum_truncate)
+				truncate = VACOPTVALUE_ENABLED;
+			else
+				truncate = VACOPTVALUE_DISABLED;
+		}
+		else
+			truncate = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_max_eager_freeze_failure_rate >= 0)
+			max_eager_freeze_failure_rate = relopts->vacuum_max_eager_freeze_failure_rate;
+		else
+			max_eager_freeze_failure_rate = -1.0;
+
 		tab = palloc(sizeof(autovac_table));
 		tab->at_relid = relid;
 		tab->at_sharedrel = classForm->relisshared;
@@ -2806,13 +2842,8 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			(doanalyze ? VACOPT_ANALYZE : 0) |
 			(!wraparound ? VACOPT_SKIP_LOCKED : 0);
 
-		/*
-		 * index_cleanup and truncate are unspecified at first in autovacuum.
-		 * They will be filled in with usable values using their reloptions
-		 * (or reloption defaults) later.
-		 */
-		tab->at_params.index_cleanup = VACOPTVALUE_UNSPECIFIED;
-		tab->at_params.truncate = VACOPTVALUE_UNSPECIFIED;
+		tab->at_params.index_cleanup = index_cleanup;
+		tab->at_params.truncate = truncate;
 		/* As of now, we don't support parallel vacuum for autovacuum */
 		tab->at_params.nworkers = -1;
 		tab->at_params.freeze_min_age = freeze_min_age;
@@ -2822,12 +2853,7 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		tab->at_params.is_wraparound = wraparound;
 		tab->at_params.log_min_duration = log_min_duration;
 		tab->at_params.toast_parent = InvalidOid;
-
-		/*
-		 * Later, in vacuum_rel(), we check reloptions for any
-		 * vacuum_max_eager_freeze_failure_rate override.
-		 */
-		tab->at_params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+		tab->at_params.max_eager_freeze_failure_rate = max_eager_freeze_failure_rate;
 		tab->at_storage_param_vac_cost_limit = avopts ?
 			avopts->vacuum_cost_limit : 0;
 		tab->at_storage_param_vac_cost_delay = avopts ?
-- 
2.39.5 (Apple Git-154)


--QWBYbd5Ar5k8NvSv
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
	filename=v1-0003-autovac-combine-reloptions-correctly.patch



^ permalink  raw  reply  [nested|flat] 804+ messages in thread

* [PATCH v1 2/4] autovac: resolve relopts before vacuuming
@ 2025-06-23 19:42 Nathan Bossart <[email protected]>
  0 siblings, 0 replies; 804+ messages in thread

From: Nathan Bossart @ 2025-06-23 19:42 UTC (permalink / raw)

---
 src/backend/commands/vacuum.c       |  7 ++--
 src/backend/postmaster/autovacuum.c | 52 +++++++++++++++++++++--------
 2 files changed, 44 insertions(+), 15 deletions(-)

diff --git a/src/backend/commands/vacuum.c b/src/backend/commands/vacuum.c
index 33a33bf6b1c..0015b9ef4b0 100644
--- a/src/backend/commands/vacuum.c
+++ b/src/backend/commands/vacuum.c
@@ -421,7 +421,7 @@ ExecVacuum(ParseState *pstate, VacuumStmt *vacstmt, bool isTopLevel)
 	/*
 	 * Later, in vacuum_rel(), we check if a reloption override was specified.
 	 */
-	params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+	params.max_eager_freeze_failure_rate = -1.0;
 
 	/*
 	 * Create special memory context for cross-transaction storage.
@@ -2195,10 +2195,13 @@ vacuum_rel(Oid relid, RangeVar *relation, VacuumParams *params,
 	 * Check if the vacuum_max_eager_freeze_failure_rate table storage
 	 * parameter was specified. This overrides the GUC value.
 	 */
-	if (rel->rd_options != NULL &&
+	if (params->max_eager_freeze_failure_rate < 0 &&
+		rel->rd_options != NULL &&
 		((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate >= 0)
 		params->max_eager_freeze_failure_rate =
 			((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate;
+	else
+		params->max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
 
 	/*
 	 * Set truncate option based on truncate reloption or GUC if it wasn't
diff --git a/src/backend/postmaster/autovacuum.c b/src/backend/postmaster/autovacuum.c
index f86c9fed853..3bedca971ff 100644
--- a/src/backend/postmaster/autovacuum.c
+++ b/src/backend/postmaster/autovacuum.c
@@ -2758,6 +2758,9 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		int			multixact_freeze_table_age;
 		int			log_min_duration;
 		AutoVacOpts *avopts = (relopts ? &relopts->autovacuum : NULL);
+		VacOptValue index_cleanup;
+		VacOptValue truncate;
+		double		max_eager_freeze_failure_rate;
 
 		/*
 		 * Calculate the vacuum cost parameters and the freeze ages.  If there
@@ -2790,6 +2793,39 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			? avopts->multixact_freeze_table_age
 			: default_multixact_freeze_table_age;
 
+		if (relopts)
+		{
+			switch (relopts->vacuum_index_cleanup)
+			{
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_AUTO:
+					index_cleanup = VACOPTVALUE_AUTO;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_ON:
+					index_cleanup = VACOPTVALUE_ENABLED;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_OFF:
+					index_cleanup = VACOPTVALUE_DISABLED;
+					break;
+			}
+		}
+		else
+			index_cleanup = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_truncate_set)
+		{
+			if (relopts->vacuum_truncate)
+				truncate = VACOPTVALUE_ENABLED;
+			else
+				truncate = VACOPTVALUE_DISABLED;
+		}
+		else
+			truncate = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_max_eager_freeze_failure_rate >= 0)
+			max_eager_freeze_failure_rate = relopts->vacuum_max_eager_freeze_failure_rate;
+		else
+			max_eager_freeze_failure_rate = -1.0;
+
 		tab = palloc(sizeof(autovac_table));
 		tab->at_relid = relid;
 		tab->at_sharedrel = classForm->relisshared;
@@ -2806,13 +2842,8 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			(doanalyze ? VACOPT_ANALYZE : 0) |
 			(!wraparound ? VACOPT_SKIP_LOCKED : 0);
 
-		/*
-		 * index_cleanup and truncate are unspecified at first in autovacuum.
-		 * They will be filled in with usable values using their reloptions
-		 * (or reloption defaults) later.
-		 */
-		tab->at_params.index_cleanup = VACOPTVALUE_UNSPECIFIED;
-		tab->at_params.truncate = VACOPTVALUE_UNSPECIFIED;
+		tab->at_params.index_cleanup = index_cleanup;
+		tab->at_params.truncate = truncate;
 		/* As of now, we don't support parallel vacuum for autovacuum */
 		tab->at_params.nworkers = -1;
 		tab->at_params.freeze_min_age = freeze_min_age;
@@ -2822,12 +2853,7 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		tab->at_params.is_wraparound = wraparound;
 		tab->at_params.log_min_duration = log_min_duration;
 		tab->at_params.toast_parent = InvalidOid;
-
-		/*
-		 * Later, in vacuum_rel(), we check reloptions for any
-		 * vacuum_max_eager_freeze_failure_rate override.
-		 */
-		tab->at_params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+		tab->at_params.max_eager_freeze_failure_rate = max_eager_freeze_failure_rate;
 		tab->at_storage_param_vac_cost_limit = avopts ?
 			avopts->vacuum_cost_limit : 0;
 		tab->at_storage_param_vac_cost_delay = avopts ?
-- 
2.39.5 (Apple Git-154)


--QWBYbd5Ar5k8NvSv
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
	filename=v1-0003-autovac-combine-reloptions-correctly.patch



^ permalink  raw  reply  [nested|flat] 804+ messages in thread

* [PATCH v1 2/4] autovac: resolve relopts before vacuuming
@ 2025-06-23 19:42 Nathan Bossart <[email protected]>
  0 siblings, 0 replies; 804+ messages in thread

From: Nathan Bossart @ 2025-06-23 19:42 UTC (permalink / raw)

---
 src/backend/commands/vacuum.c       |  7 ++--
 src/backend/postmaster/autovacuum.c | 52 +++++++++++++++++++++--------
 2 files changed, 44 insertions(+), 15 deletions(-)

diff --git a/src/backend/commands/vacuum.c b/src/backend/commands/vacuum.c
index 33a33bf6b1c..0015b9ef4b0 100644
--- a/src/backend/commands/vacuum.c
+++ b/src/backend/commands/vacuum.c
@@ -421,7 +421,7 @@ ExecVacuum(ParseState *pstate, VacuumStmt *vacstmt, bool isTopLevel)
 	/*
 	 * Later, in vacuum_rel(), we check if a reloption override was specified.
 	 */
-	params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+	params.max_eager_freeze_failure_rate = -1.0;
 
 	/*
 	 * Create special memory context for cross-transaction storage.
@@ -2195,10 +2195,13 @@ vacuum_rel(Oid relid, RangeVar *relation, VacuumParams *params,
 	 * Check if the vacuum_max_eager_freeze_failure_rate table storage
 	 * parameter was specified. This overrides the GUC value.
 	 */
-	if (rel->rd_options != NULL &&
+	if (params->max_eager_freeze_failure_rate < 0 &&
+		rel->rd_options != NULL &&
 		((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate >= 0)
 		params->max_eager_freeze_failure_rate =
 			((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate;
+	else
+		params->max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
 
 	/*
 	 * Set truncate option based on truncate reloption or GUC if it wasn't
diff --git a/src/backend/postmaster/autovacuum.c b/src/backend/postmaster/autovacuum.c
index f86c9fed853..3bedca971ff 100644
--- a/src/backend/postmaster/autovacuum.c
+++ b/src/backend/postmaster/autovacuum.c
@@ -2758,6 +2758,9 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		int			multixact_freeze_table_age;
 		int			log_min_duration;
 		AutoVacOpts *avopts = (relopts ? &relopts->autovacuum : NULL);
+		VacOptValue index_cleanup;
+		VacOptValue truncate;
+		double		max_eager_freeze_failure_rate;
 
 		/*
 		 * Calculate the vacuum cost parameters and the freeze ages.  If there
@@ -2790,6 +2793,39 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			? avopts->multixact_freeze_table_age
 			: default_multixact_freeze_table_age;
 
+		if (relopts)
+		{
+			switch (relopts->vacuum_index_cleanup)
+			{
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_AUTO:
+					index_cleanup = VACOPTVALUE_AUTO;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_ON:
+					index_cleanup = VACOPTVALUE_ENABLED;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_OFF:
+					index_cleanup = VACOPTVALUE_DISABLED;
+					break;
+			}
+		}
+		else
+			index_cleanup = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_truncate_set)
+		{
+			if (relopts->vacuum_truncate)
+				truncate = VACOPTVALUE_ENABLED;
+			else
+				truncate = VACOPTVALUE_DISABLED;
+		}
+		else
+			truncate = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_max_eager_freeze_failure_rate >= 0)
+			max_eager_freeze_failure_rate = relopts->vacuum_max_eager_freeze_failure_rate;
+		else
+			max_eager_freeze_failure_rate = -1.0;
+
 		tab = palloc(sizeof(autovac_table));
 		tab->at_relid = relid;
 		tab->at_sharedrel = classForm->relisshared;
@@ -2806,13 +2842,8 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			(doanalyze ? VACOPT_ANALYZE : 0) |
 			(!wraparound ? VACOPT_SKIP_LOCKED : 0);
 
-		/*
-		 * index_cleanup and truncate are unspecified at first in autovacuum.
-		 * They will be filled in with usable values using their reloptions
-		 * (or reloption defaults) later.
-		 */
-		tab->at_params.index_cleanup = VACOPTVALUE_UNSPECIFIED;
-		tab->at_params.truncate = VACOPTVALUE_UNSPECIFIED;
+		tab->at_params.index_cleanup = index_cleanup;
+		tab->at_params.truncate = truncate;
 		/* As of now, we don't support parallel vacuum for autovacuum */
 		tab->at_params.nworkers = -1;
 		tab->at_params.freeze_min_age = freeze_min_age;
@@ -2822,12 +2853,7 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		tab->at_params.is_wraparound = wraparound;
 		tab->at_params.log_min_duration = log_min_duration;
 		tab->at_params.toast_parent = InvalidOid;
-
-		/*
-		 * Later, in vacuum_rel(), we check reloptions for any
-		 * vacuum_max_eager_freeze_failure_rate override.
-		 */
-		tab->at_params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+		tab->at_params.max_eager_freeze_failure_rate = max_eager_freeze_failure_rate;
 		tab->at_storage_param_vac_cost_limit = avopts ?
 			avopts->vacuum_cost_limit : 0;
 		tab->at_storage_param_vac_cost_delay = avopts ?
-- 
2.39.5 (Apple Git-154)


--QWBYbd5Ar5k8NvSv
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
	filename=v1-0003-autovac-combine-reloptions-correctly.patch



^ permalink  raw  reply  [nested|flat] 804+ messages in thread

* [PATCH v1 2/4] autovac: resolve relopts before vacuuming
@ 2025-06-23 19:42 Nathan Bossart <[email protected]>
  0 siblings, 0 replies; 804+ messages in thread

From: Nathan Bossart @ 2025-06-23 19:42 UTC (permalink / raw)

---
 src/backend/commands/vacuum.c       |  7 ++--
 src/backend/postmaster/autovacuum.c | 52 +++++++++++++++++++++--------
 2 files changed, 44 insertions(+), 15 deletions(-)

diff --git a/src/backend/commands/vacuum.c b/src/backend/commands/vacuum.c
index 33a33bf6b1c..0015b9ef4b0 100644
--- a/src/backend/commands/vacuum.c
+++ b/src/backend/commands/vacuum.c
@@ -421,7 +421,7 @@ ExecVacuum(ParseState *pstate, VacuumStmt *vacstmt, bool isTopLevel)
 	/*
 	 * Later, in vacuum_rel(), we check if a reloption override was specified.
 	 */
-	params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+	params.max_eager_freeze_failure_rate = -1.0;
 
 	/*
 	 * Create special memory context for cross-transaction storage.
@@ -2195,10 +2195,13 @@ vacuum_rel(Oid relid, RangeVar *relation, VacuumParams *params,
 	 * Check if the vacuum_max_eager_freeze_failure_rate table storage
 	 * parameter was specified. This overrides the GUC value.
 	 */
-	if (rel->rd_options != NULL &&
+	if (params->max_eager_freeze_failure_rate < 0 &&
+		rel->rd_options != NULL &&
 		((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate >= 0)
 		params->max_eager_freeze_failure_rate =
 			((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate;
+	else
+		params->max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
 
 	/*
 	 * Set truncate option based on truncate reloption or GUC if it wasn't
diff --git a/src/backend/postmaster/autovacuum.c b/src/backend/postmaster/autovacuum.c
index f86c9fed853..3bedca971ff 100644
--- a/src/backend/postmaster/autovacuum.c
+++ b/src/backend/postmaster/autovacuum.c
@@ -2758,6 +2758,9 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		int			multixact_freeze_table_age;
 		int			log_min_duration;
 		AutoVacOpts *avopts = (relopts ? &relopts->autovacuum : NULL);
+		VacOptValue index_cleanup;
+		VacOptValue truncate;
+		double		max_eager_freeze_failure_rate;
 
 		/*
 		 * Calculate the vacuum cost parameters and the freeze ages.  If there
@@ -2790,6 +2793,39 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			? avopts->multixact_freeze_table_age
 			: default_multixact_freeze_table_age;
 
+		if (relopts)
+		{
+			switch (relopts->vacuum_index_cleanup)
+			{
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_AUTO:
+					index_cleanup = VACOPTVALUE_AUTO;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_ON:
+					index_cleanup = VACOPTVALUE_ENABLED;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_OFF:
+					index_cleanup = VACOPTVALUE_DISABLED;
+					break;
+			}
+		}
+		else
+			index_cleanup = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_truncate_set)
+		{
+			if (relopts->vacuum_truncate)
+				truncate = VACOPTVALUE_ENABLED;
+			else
+				truncate = VACOPTVALUE_DISABLED;
+		}
+		else
+			truncate = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_max_eager_freeze_failure_rate >= 0)
+			max_eager_freeze_failure_rate = relopts->vacuum_max_eager_freeze_failure_rate;
+		else
+			max_eager_freeze_failure_rate = -1.0;
+
 		tab = palloc(sizeof(autovac_table));
 		tab->at_relid = relid;
 		tab->at_sharedrel = classForm->relisshared;
@@ -2806,13 +2842,8 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			(doanalyze ? VACOPT_ANALYZE : 0) |
 			(!wraparound ? VACOPT_SKIP_LOCKED : 0);
 
-		/*
-		 * index_cleanup and truncate are unspecified at first in autovacuum.
-		 * They will be filled in with usable values using their reloptions
-		 * (or reloption defaults) later.
-		 */
-		tab->at_params.index_cleanup = VACOPTVALUE_UNSPECIFIED;
-		tab->at_params.truncate = VACOPTVALUE_UNSPECIFIED;
+		tab->at_params.index_cleanup = index_cleanup;
+		tab->at_params.truncate = truncate;
 		/* As of now, we don't support parallel vacuum for autovacuum */
 		tab->at_params.nworkers = -1;
 		tab->at_params.freeze_min_age = freeze_min_age;
@@ -2822,12 +2853,7 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		tab->at_params.is_wraparound = wraparound;
 		tab->at_params.log_min_duration = log_min_duration;
 		tab->at_params.toast_parent = InvalidOid;
-
-		/*
-		 * Later, in vacuum_rel(), we check reloptions for any
-		 * vacuum_max_eager_freeze_failure_rate override.
-		 */
-		tab->at_params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+		tab->at_params.max_eager_freeze_failure_rate = max_eager_freeze_failure_rate;
 		tab->at_storage_param_vac_cost_limit = avopts ?
 			avopts->vacuum_cost_limit : 0;
 		tab->at_storage_param_vac_cost_delay = avopts ?
-- 
2.39.5 (Apple Git-154)


--QWBYbd5Ar5k8NvSv
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
	filename=v1-0003-autovac-combine-reloptions-correctly.patch



^ permalink  raw  reply  [nested|flat] 804+ messages in thread

* [PATCH v1 2/4] autovac: resolve relopts before vacuuming
@ 2025-06-23 19:42 Nathan Bossart <[email protected]>
  0 siblings, 0 replies; 804+ messages in thread

From: Nathan Bossart @ 2025-06-23 19:42 UTC (permalink / raw)

---
 src/backend/commands/vacuum.c       |  7 ++--
 src/backend/postmaster/autovacuum.c | 52 +++++++++++++++++++++--------
 2 files changed, 44 insertions(+), 15 deletions(-)

diff --git a/src/backend/commands/vacuum.c b/src/backend/commands/vacuum.c
index 33a33bf6b1c..0015b9ef4b0 100644
--- a/src/backend/commands/vacuum.c
+++ b/src/backend/commands/vacuum.c
@@ -421,7 +421,7 @@ ExecVacuum(ParseState *pstate, VacuumStmt *vacstmt, bool isTopLevel)
 	/*
 	 * Later, in vacuum_rel(), we check if a reloption override was specified.
 	 */
-	params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+	params.max_eager_freeze_failure_rate = -1.0;
 
 	/*
 	 * Create special memory context for cross-transaction storage.
@@ -2195,10 +2195,13 @@ vacuum_rel(Oid relid, RangeVar *relation, VacuumParams *params,
 	 * Check if the vacuum_max_eager_freeze_failure_rate table storage
 	 * parameter was specified. This overrides the GUC value.
 	 */
-	if (rel->rd_options != NULL &&
+	if (params->max_eager_freeze_failure_rate < 0 &&
+		rel->rd_options != NULL &&
 		((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate >= 0)
 		params->max_eager_freeze_failure_rate =
 			((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate;
+	else
+		params->max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
 
 	/*
 	 * Set truncate option based on truncate reloption or GUC if it wasn't
diff --git a/src/backend/postmaster/autovacuum.c b/src/backend/postmaster/autovacuum.c
index f86c9fed853..3bedca971ff 100644
--- a/src/backend/postmaster/autovacuum.c
+++ b/src/backend/postmaster/autovacuum.c
@@ -2758,6 +2758,9 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		int			multixact_freeze_table_age;
 		int			log_min_duration;
 		AutoVacOpts *avopts = (relopts ? &relopts->autovacuum : NULL);
+		VacOptValue index_cleanup;
+		VacOptValue truncate;
+		double		max_eager_freeze_failure_rate;
 
 		/*
 		 * Calculate the vacuum cost parameters and the freeze ages.  If there
@@ -2790,6 +2793,39 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			? avopts->multixact_freeze_table_age
 			: default_multixact_freeze_table_age;
 
+		if (relopts)
+		{
+			switch (relopts->vacuum_index_cleanup)
+			{
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_AUTO:
+					index_cleanup = VACOPTVALUE_AUTO;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_ON:
+					index_cleanup = VACOPTVALUE_ENABLED;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_OFF:
+					index_cleanup = VACOPTVALUE_DISABLED;
+					break;
+			}
+		}
+		else
+			index_cleanup = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_truncate_set)
+		{
+			if (relopts->vacuum_truncate)
+				truncate = VACOPTVALUE_ENABLED;
+			else
+				truncate = VACOPTVALUE_DISABLED;
+		}
+		else
+			truncate = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_max_eager_freeze_failure_rate >= 0)
+			max_eager_freeze_failure_rate = relopts->vacuum_max_eager_freeze_failure_rate;
+		else
+			max_eager_freeze_failure_rate = -1.0;
+
 		tab = palloc(sizeof(autovac_table));
 		tab->at_relid = relid;
 		tab->at_sharedrel = classForm->relisshared;
@@ -2806,13 +2842,8 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			(doanalyze ? VACOPT_ANALYZE : 0) |
 			(!wraparound ? VACOPT_SKIP_LOCKED : 0);
 
-		/*
-		 * index_cleanup and truncate are unspecified at first in autovacuum.
-		 * They will be filled in with usable values using their reloptions
-		 * (or reloption defaults) later.
-		 */
-		tab->at_params.index_cleanup = VACOPTVALUE_UNSPECIFIED;
-		tab->at_params.truncate = VACOPTVALUE_UNSPECIFIED;
+		tab->at_params.index_cleanup = index_cleanup;
+		tab->at_params.truncate = truncate;
 		/* As of now, we don't support parallel vacuum for autovacuum */
 		tab->at_params.nworkers = -1;
 		tab->at_params.freeze_min_age = freeze_min_age;
@@ -2822,12 +2853,7 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		tab->at_params.is_wraparound = wraparound;
 		tab->at_params.log_min_duration = log_min_duration;
 		tab->at_params.toast_parent = InvalidOid;
-
-		/*
-		 * Later, in vacuum_rel(), we check reloptions for any
-		 * vacuum_max_eager_freeze_failure_rate override.
-		 */
-		tab->at_params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+		tab->at_params.max_eager_freeze_failure_rate = max_eager_freeze_failure_rate;
 		tab->at_storage_param_vac_cost_limit = avopts ?
 			avopts->vacuum_cost_limit : 0;
 		tab->at_storage_param_vac_cost_delay = avopts ?
-- 
2.39.5 (Apple Git-154)


--QWBYbd5Ar5k8NvSv
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
	filename=v1-0003-autovac-combine-reloptions-correctly.patch



^ permalink  raw  reply  [nested|flat] 804+ messages in thread

* [PATCH v1 2/4] autovac: resolve relopts before vacuuming
@ 2025-06-23 19:42 Nathan Bossart <[email protected]>
  0 siblings, 0 replies; 804+ messages in thread

From: Nathan Bossart @ 2025-06-23 19:42 UTC (permalink / raw)

---
 src/backend/commands/vacuum.c       |  7 ++--
 src/backend/postmaster/autovacuum.c | 52 +++++++++++++++++++++--------
 2 files changed, 44 insertions(+), 15 deletions(-)

diff --git a/src/backend/commands/vacuum.c b/src/backend/commands/vacuum.c
index 33a33bf6b1c..0015b9ef4b0 100644
--- a/src/backend/commands/vacuum.c
+++ b/src/backend/commands/vacuum.c
@@ -421,7 +421,7 @@ ExecVacuum(ParseState *pstate, VacuumStmt *vacstmt, bool isTopLevel)
 	/*
 	 * Later, in vacuum_rel(), we check if a reloption override was specified.
 	 */
-	params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+	params.max_eager_freeze_failure_rate = -1.0;
 
 	/*
 	 * Create special memory context for cross-transaction storage.
@@ -2195,10 +2195,13 @@ vacuum_rel(Oid relid, RangeVar *relation, VacuumParams *params,
 	 * Check if the vacuum_max_eager_freeze_failure_rate table storage
 	 * parameter was specified. This overrides the GUC value.
 	 */
-	if (rel->rd_options != NULL &&
+	if (params->max_eager_freeze_failure_rate < 0 &&
+		rel->rd_options != NULL &&
 		((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate >= 0)
 		params->max_eager_freeze_failure_rate =
 			((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate;
+	else
+		params->max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
 
 	/*
 	 * Set truncate option based on truncate reloption or GUC if it wasn't
diff --git a/src/backend/postmaster/autovacuum.c b/src/backend/postmaster/autovacuum.c
index f86c9fed853..3bedca971ff 100644
--- a/src/backend/postmaster/autovacuum.c
+++ b/src/backend/postmaster/autovacuum.c
@@ -2758,6 +2758,9 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		int			multixact_freeze_table_age;
 		int			log_min_duration;
 		AutoVacOpts *avopts = (relopts ? &relopts->autovacuum : NULL);
+		VacOptValue index_cleanup;
+		VacOptValue truncate;
+		double		max_eager_freeze_failure_rate;
 
 		/*
 		 * Calculate the vacuum cost parameters and the freeze ages.  If there
@@ -2790,6 +2793,39 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			? avopts->multixact_freeze_table_age
 			: default_multixact_freeze_table_age;
 
+		if (relopts)
+		{
+			switch (relopts->vacuum_index_cleanup)
+			{
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_AUTO:
+					index_cleanup = VACOPTVALUE_AUTO;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_ON:
+					index_cleanup = VACOPTVALUE_ENABLED;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_OFF:
+					index_cleanup = VACOPTVALUE_DISABLED;
+					break;
+			}
+		}
+		else
+			index_cleanup = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_truncate_set)
+		{
+			if (relopts->vacuum_truncate)
+				truncate = VACOPTVALUE_ENABLED;
+			else
+				truncate = VACOPTVALUE_DISABLED;
+		}
+		else
+			truncate = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_max_eager_freeze_failure_rate >= 0)
+			max_eager_freeze_failure_rate = relopts->vacuum_max_eager_freeze_failure_rate;
+		else
+			max_eager_freeze_failure_rate = -1.0;
+
 		tab = palloc(sizeof(autovac_table));
 		tab->at_relid = relid;
 		tab->at_sharedrel = classForm->relisshared;
@@ -2806,13 +2842,8 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			(doanalyze ? VACOPT_ANALYZE : 0) |
 			(!wraparound ? VACOPT_SKIP_LOCKED : 0);
 
-		/*
-		 * index_cleanup and truncate are unspecified at first in autovacuum.
-		 * They will be filled in with usable values using their reloptions
-		 * (or reloption defaults) later.
-		 */
-		tab->at_params.index_cleanup = VACOPTVALUE_UNSPECIFIED;
-		tab->at_params.truncate = VACOPTVALUE_UNSPECIFIED;
+		tab->at_params.index_cleanup = index_cleanup;
+		tab->at_params.truncate = truncate;
 		/* As of now, we don't support parallel vacuum for autovacuum */
 		tab->at_params.nworkers = -1;
 		tab->at_params.freeze_min_age = freeze_min_age;
@@ -2822,12 +2853,7 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		tab->at_params.is_wraparound = wraparound;
 		tab->at_params.log_min_duration = log_min_duration;
 		tab->at_params.toast_parent = InvalidOid;
-
-		/*
-		 * Later, in vacuum_rel(), we check reloptions for any
-		 * vacuum_max_eager_freeze_failure_rate override.
-		 */
-		tab->at_params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+		tab->at_params.max_eager_freeze_failure_rate = max_eager_freeze_failure_rate;
 		tab->at_storage_param_vac_cost_limit = avopts ?
 			avopts->vacuum_cost_limit : 0;
 		tab->at_storage_param_vac_cost_delay = avopts ?
-- 
2.39.5 (Apple Git-154)


--QWBYbd5Ar5k8NvSv
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
	filename=v1-0003-autovac-combine-reloptions-correctly.patch



^ permalink  raw  reply  [nested|flat] 804+ messages in thread

* [PATCH v1 2/4] autovac: resolve relopts before vacuuming
@ 2025-06-23 19:42 Nathan Bossart <[email protected]>
  0 siblings, 0 replies; 804+ messages in thread

From: Nathan Bossart @ 2025-06-23 19:42 UTC (permalink / raw)

---
 src/backend/commands/vacuum.c       |  7 ++--
 src/backend/postmaster/autovacuum.c | 52 +++++++++++++++++++++--------
 2 files changed, 44 insertions(+), 15 deletions(-)

diff --git a/src/backend/commands/vacuum.c b/src/backend/commands/vacuum.c
index 33a33bf6b1c..0015b9ef4b0 100644
--- a/src/backend/commands/vacuum.c
+++ b/src/backend/commands/vacuum.c
@@ -421,7 +421,7 @@ ExecVacuum(ParseState *pstate, VacuumStmt *vacstmt, bool isTopLevel)
 	/*
 	 * Later, in vacuum_rel(), we check if a reloption override was specified.
 	 */
-	params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+	params.max_eager_freeze_failure_rate = -1.0;
 
 	/*
 	 * Create special memory context for cross-transaction storage.
@@ -2195,10 +2195,13 @@ vacuum_rel(Oid relid, RangeVar *relation, VacuumParams *params,
 	 * Check if the vacuum_max_eager_freeze_failure_rate table storage
 	 * parameter was specified. This overrides the GUC value.
 	 */
-	if (rel->rd_options != NULL &&
+	if (params->max_eager_freeze_failure_rate < 0 &&
+		rel->rd_options != NULL &&
 		((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate >= 0)
 		params->max_eager_freeze_failure_rate =
 			((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate;
+	else
+		params->max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
 
 	/*
 	 * Set truncate option based on truncate reloption or GUC if it wasn't
diff --git a/src/backend/postmaster/autovacuum.c b/src/backend/postmaster/autovacuum.c
index f86c9fed853..3bedca971ff 100644
--- a/src/backend/postmaster/autovacuum.c
+++ b/src/backend/postmaster/autovacuum.c
@@ -2758,6 +2758,9 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		int			multixact_freeze_table_age;
 		int			log_min_duration;
 		AutoVacOpts *avopts = (relopts ? &relopts->autovacuum : NULL);
+		VacOptValue index_cleanup;
+		VacOptValue truncate;
+		double		max_eager_freeze_failure_rate;
 
 		/*
 		 * Calculate the vacuum cost parameters and the freeze ages.  If there
@@ -2790,6 +2793,39 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			? avopts->multixact_freeze_table_age
 			: default_multixact_freeze_table_age;
 
+		if (relopts)
+		{
+			switch (relopts->vacuum_index_cleanup)
+			{
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_AUTO:
+					index_cleanup = VACOPTVALUE_AUTO;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_ON:
+					index_cleanup = VACOPTVALUE_ENABLED;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_OFF:
+					index_cleanup = VACOPTVALUE_DISABLED;
+					break;
+			}
+		}
+		else
+			index_cleanup = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_truncate_set)
+		{
+			if (relopts->vacuum_truncate)
+				truncate = VACOPTVALUE_ENABLED;
+			else
+				truncate = VACOPTVALUE_DISABLED;
+		}
+		else
+			truncate = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_max_eager_freeze_failure_rate >= 0)
+			max_eager_freeze_failure_rate = relopts->vacuum_max_eager_freeze_failure_rate;
+		else
+			max_eager_freeze_failure_rate = -1.0;
+
 		tab = palloc(sizeof(autovac_table));
 		tab->at_relid = relid;
 		tab->at_sharedrel = classForm->relisshared;
@@ -2806,13 +2842,8 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			(doanalyze ? VACOPT_ANALYZE : 0) |
 			(!wraparound ? VACOPT_SKIP_LOCKED : 0);
 
-		/*
-		 * index_cleanup and truncate are unspecified at first in autovacuum.
-		 * They will be filled in with usable values using their reloptions
-		 * (or reloption defaults) later.
-		 */
-		tab->at_params.index_cleanup = VACOPTVALUE_UNSPECIFIED;
-		tab->at_params.truncate = VACOPTVALUE_UNSPECIFIED;
+		tab->at_params.index_cleanup = index_cleanup;
+		tab->at_params.truncate = truncate;
 		/* As of now, we don't support parallel vacuum for autovacuum */
 		tab->at_params.nworkers = -1;
 		tab->at_params.freeze_min_age = freeze_min_age;
@@ -2822,12 +2853,7 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		tab->at_params.is_wraparound = wraparound;
 		tab->at_params.log_min_duration = log_min_duration;
 		tab->at_params.toast_parent = InvalidOid;
-
-		/*
-		 * Later, in vacuum_rel(), we check reloptions for any
-		 * vacuum_max_eager_freeze_failure_rate override.
-		 */
-		tab->at_params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+		tab->at_params.max_eager_freeze_failure_rate = max_eager_freeze_failure_rate;
 		tab->at_storage_param_vac_cost_limit = avopts ?
 			avopts->vacuum_cost_limit : 0;
 		tab->at_storage_param_vac_cost_delay = avopts ?
-- 
2.39.5 (Apple Git-154)


--QWBYbd5Ar5k8NvSv
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
	filename=v1-0003-autovac-combine-reloptions-correctly.patch



^ permalink  raw  reply  [nested|flat] 804+ messages in thread

* [PATCH v1 2/4] autovac: resolve relopts before vacuuming
@ 2025-06-23 19:42 Nathan Bossart <[email protected]>
  0 siblings, 0 replies; 804+ messages in thread

From: Nathan Bossart @ 2025-06-23 19:42 UTC (permalink / raw)

---
 src/backend/commands/vacuum.c       |  7 ++--
 src/backend/postmaster/autovacuum.c | 52 +++++++++++++++++++++--------
 2 files changed, 44 insertions(+), 15 deletions(-)

diff --git a/src/backend/commands/vacuum.c b/src/backend/commands/vacuum.c
index 33a33bf6b1c..0015b9ef4b0 100644
--- a/src/backend/commands/vacuum.c
+++ b/src/backend/commands/vacuum.c
@@ -421,7 +421,7 @@ ExecVacuum(ParseState *pstate, VacuumStmt *vacstmt, bool isTopLevel)
 	/*
 	 * Later, in vacuum_rel(), we check if a reloption override was specified.
 	 */
-	params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+	params.max_eager_freeze_failure_rate = -1.0;
 
 	/*
 	 * Create special memory context for cross-transaction storage.
@@ -2195,10 +2195,13 @@ vacuum_rel(Oid relid, RangeVar *relation, VacuumParams *params,
 	 * Check if the vacuum_max_eager_freeze_failure_rate table storage
 	 * parameter was specified. This overrides the GUC value.
 	 */
-	if (rel->rd_options != NULL &&
+	if (params->max_eager_freeze_failure_rate < 0 &&
+		rel->rd_options != NULL &&
 		((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate >= 0)
 		params->max_eager_freeze_failure_rate =
 			((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate;
+	else
+		params->max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
 
 	/*
 	 * Set truncate option based on truncate reloption or GUC if it wasn't
diff --git a/src/backend/postmaster/autovacuum.c b/src/backend/postmaster/autovacuum.c
index f86c9fed853..3bedca971ff 100644
--- a/src/backend/postmaster/autovacuum.c
+++ b/src/backend/postmaster/autovacuum.c
@@ -2758,6 +2758,9 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		int			multixact_freeze_table_age;
 		int			log_min_duration;
 		AutoVacOpts *avopts = (relopts ? &relopts->autovacuum : NULL);
+		VacOptValue index_cleanup;
+		VacOptValue truncate;
+		double		max_eager_freeze_failure_rate;
 
 		/*
 		 * Calculate the vacuum cost parameters and the freeze ages.  If there
@@ -2790,6 +2793,39 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			? avopts->multixact_freeze_table_age
 			: default_multixact_freeze_table_age;
 
+		if (relopts)
+		{
+			switch (relopts->vacuum_index_cleanup)
+			{
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_AUTO:
+					index_cleanup = VACOPTVALUE_AUTO;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_ON:
+					index_cleanup = VACOPTVALUE_ENABLED;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_OFF:
+					index_cleanup = VACOPTVALUE_DISABLED;
+					break;
+			}
+		}
+		else
+			index_cleanup = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_truncate_set)
+		{
+			if (relopts->vacuum_truncate)
+				truncate = VACOPTVALUE_ENABLED;
+			else
+				truncate = VACOPTVALUE_DISABLED;
+		}
+		else
+			truncate = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_max_eager_freeze_failure_rate >= 0)
+			max_eager_freeze_failure_rate = relopts->vacuum_max_eager_freeze_failure_rate;
+		else
+			max_eager_freeze_failure_rate = -1.0;
+
 		tab = palloc(sizeof(autovac_table));
 		tab->at_relid = relid;
 		tab->at_sharedrel = classForm->relisshared;
@@ -2806,13 +2842,8 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			(doanalyze ? VACOPT_ANALYZE : 0) |
 			(!wraparound ? VACOPT_SKIP_LOCKED : 0);
 
-		/*
-		 * index_cleanup and truncate are unspecified at first in autovacuum.
-		 * They will be filled in with usable values using their reloptions
-		 * (or reloption defaults) later.
-		 */
-		tab->at_params.index_cleanup = VACOPTVALUE_UNSPECIFIED;
-		tab->at_params.truncate = VACOPTVALUE_UNSPECIFIED;
+		tab->at_params.index_cleanup = index_cleanup;
+		tab->at_params.truncate = truncate;
 		/* As of now, we don't support parallel vacuum for autovacuum */
 		tab->at_params.nworkers = -1;
 		tab->at_params.freeze_min_age = freeze_min_age;
@@ -2822,12 +2853,7 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		tab->at_params.is_wraparound = wraparound;
 		tab->at_params.log_min_duration = log_min_duration;
 		tab->at_params.toast_parent = InvalidOid;
-
-		/*
-		 * Later, in vacuum_rel(), we check reloptions for any
-		 * vacuum_max_eager_freeze_failure_rate override.
-		 */
-		tab->at_params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+		tab->at_params.max_eager_freeze_failure_rate = max_eager_freeze_failure_rate;
 		tab->at_storage_param_vac_cost_limit = avopts ?
 			avopts->vacuum_cost_limit : 0;
 		tab->at_storage_param_vac_cost_delay = avopts ?
-- 
2.39.5 (Apple Git-154)


--QWBYbd5Ar5k8NvSv
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
	filename=v1-0003-autovac-combine-reloptions-correctly.patch



^ permalink  raw  reply  [nested|flat] 804+ messages in thread

* [PATCH v1 2/4] autovac: resolve relopts before vacuuming
@ 2025-06-23 19:42 Nathan Bossart <[email protected]>
  0 siblings, 0 replies; 804+ messages in thread

From: Nathan Bossart @ 2025-06-23 19:42 UTC (permalink / raw)

---
 src/backend/commands/vacuum.c       |  7 ++--
 src/backend/postmaster/autovacuum.c | 52 +++++++++++++++++++++--------
 2 files changed, 44 insertions(+), 15 deletions(-)

diff --git a/src/backend/commands/vacuum.c b/src/backend/commands/vacuum.c
index 33a33bf6b1c..0015b9ef4b0 100644
--- a/src/backend/commands/vacuum.c
+++ b/src/backend/commands/vacuum.c
@@ -421,7 +421,7 @@ ExecVacuum(ParseState *pstate, VacuumStmt *vacstmt, bool isTopLevel)
 	/*
 	 * Later, in vacuum_rel(), we check if a reloption override was specified.
 	 */
-	params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+	params.max_eager_freeze_failure_rate = -1.0;
 
 	/*
 	 * Create special memory context for cross-transaction storage.
@@ -2195,10 +2195,13 @@ vacuum_rel(Oid relid, RangeVar *relation, VacuumParams *params,
 	 * Check if the vacuum_max_eager_freeze_failure_rate table storage
 	 * parameter was specified. This overrides the GUC value.
 	 */
-	if (rel->rd_options != NULL &&
+	if (params->max_eager_freeze_failure_rate < 0 &&
+		rel->rd_options != NULL &&
 		((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate >= 0)
 		params->max_eager_freeze_failure_rate =
 			((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate;
+	else
+		params->max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
 
 	/*
 	 * Set truncate option based on truncate reloption or GUC if it wasn't
diff --git a/src/backend/postmaster/autovacuum.c b/src/backend/postmaster/autovacuum.c
index f86c9fed853..3bedca971ff 100644
--- a/src/backend/postmaster/autovacuum.c
+++ b/src/backend/postmaster/autovacuum.c
@@ -2758,6 +2758,9 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		int			multixact_freeze_table_age;
 		int			log_min_duration;
 		AutoVacOpts *avopts = (relopts ? &relopts->autovacuum : NULL);
+		VacOptValue index_cleanup;
+		VacOptValue truncate;
+		double		max_eager_freeze_failure_rate;
 
 		/*
 		 * Calculate the vacuum cost parameters and the freeze ages.  If there
@@ -2790,6 +2793,39 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			? avopts->multixact_freeze_table_age
 			: default_multixact_freeze_table_age;
 
+		if (relopts)
+		{
+			switch (relopts->vacuum_index_cleanup)
+			{
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_AUTO:
+					index_cleanup = VACOPTVALUE_AUTO;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_ON:
+					index_cleanup = VACOPTVALUE_ENABLED;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_OFF:
+					index_cleanup = VACOPTVALUE_DISABLED;
+					break;
+			}
+		}
+		else
+			index_cleanup = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_truncate_set)
+		{
+			if (relopts->vacuum_truncate)
+				truncate = VACOPTVALUE_ENABLED;
+			else
+				truncate = VACOPTVALUE_DISABLED;
+		}
+		else
+			truncate = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_max_eager_freeze_failure_rate >= 0)
+			max_eager_freeze_failure_rate = relopts->vacuum_max_eager_freeze_failure_rate;
+		else
+			max_eager_freeze_failure_rate = -1.0;
+
 		tab = palloc(sizeof(autovac_table));
 		tab->at_relid = relid;
 		tab->at_sharedrel = classForm->relisshared;
@@ -2806,13 +2842,8 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			(doanalyze ? VACOPT_ANALYZE : 0) |
 			(!wraparound ? VACOPT_SKIP_LOCKED : 0);
 
-		/*
-		 * index_cleanup and truncate are unspecified at first in autovacuum.
-		 * They will be filled in with usable values using their reloptions
-		 * (or reloption defaults) later.
-		 */
-		tab->at_params.index_cleanup = VACOPTVALUE_UNSPECIFIED;
-		tab->at_params.truncate = VACOPTVALUE_UNSPECIFIED;
+		tab->at_params.index_cleanup = index_cleanup;
+		tab->at_params.truncate = truncate;
 		/* As of now, we don't support parallel vacuum for autovacuum */
 		tab->at_params.nworkers = -1;
 		tab->at_params.freeze_min_age = freeze_min_age;
@@ -2822,12 +2853,7 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		tab->at_params.is_wraparound = wraparound;
 		tab->at_params.log_min_duration = log_min_duration;
 		tab->at_params.toast_parent = InvalidOid;
-
-		/*
-		 * Later, in vacuum_rel(), we check reloptions for any
-		 * vacuum_max_eager_freeze_failure_rate override.
-		 */
-		tab->at_params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+		tab->at_params.max_eager_freeze_failure_rate = max_eager_freeze_failure_rate;
 		tab->at_storage_param_vac_cost_limit = avopts ?
 			avopts->vacuum_cost_limit : 0;
 		tab->at_storage_param_vac_cost_delay = avopts ?
-- 
2.39.5 (Apple Git-154)


--QWBYbd5Ar5k8NvSv
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
	filename=v1-0003-autovac-combine-reloptions-correctly.patch



^ permalink  raw  reply  [nested|flat] 804+ messages in thread

* [PATCH v1 2/4] autovac: resolve relopts before vacuuming
@ 2025-06-23 19:42 Nathan Bossart <[email protected]>
  0 siblings, 0 replies; 804+ messages in thread

From: Nathan Bossart @ 2025-06-23 19:42 UTC (permalink / raw)

---
 src/backend/commands/vacuum.c       |  7 ++--
 src/backend/postmaster/autovacuum.c | 52 +++++++++++++++++++++--------
 2 files changed, 44 insertions(+), 15 deletions(-)

diff --git a/src/backend/commands/vacuum.c b/src/backend/commands/vacuum.c
index 33a33bf6b1c..0015b9ef4b0 100644
--- a/src/backend/commands/vacuum.c
+++ b/src/backend/commands/vacuum.c
@@ -421,7 +421,7 @@ ExecVacuum(ParseState *pstate, VacuumStmt *vacstmt, bool isTopLevel)
 	/*
 	 * Later, in vacuum_rel(), we check if a reloption override was specified.
 	 */
-	params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+	params.max_eager_freeze_failure_rate = -1.0;
 
 	/*
 	 * Create special memory context for cross-transaction storage.
@@ -2195,10 +2195,13 @@ vacuum_rel(Oid relid, RangeVar *relation, VacuumParams *params,
 	 * Check if the vacuum_max_eager_freeze_failure_rate table storage
 	 * parameter was specified. This overrides the GUC value.
 	 */
-	if (rel->rd_options != NULL &&
+	if (params->max_eager_freeze_failure_rate < 0 &&
+		rel->rd_options != NULL &&
 		((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate >= 0)
 		params->max_eager_freeze_failure_rate =
 			((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate;
+	else
+		params->max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
 
 	/*
 	 * Set truncate option based on truncate reloption or GUC if it wasn't
diff --git a/src/backend/postmaster/autovacuum.c b/src/backend/postmaster/autovacuum.c
index f86c9fed853..3bedca971ff 100644
--- a/src/backend/postmaster/autovacuum.c
+++ b/src/backend/postmaster/autovacuum.c
@@ -2758,6 +2758,9 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		int			multixact_freeze_table_age;
 		int			log_min_duration;
 		AutoVacOpts *avopts = (relopts ? &relopts->autovacuum : NULL);
+		VacOptValue index_cleanup;
+		VacOptValue truncate;
+		double		max_eager_freeze_failure_rate;
 
 		/*
 		 * Calculate the vacuum cost parameters and the freeze ages.  If there
@@ -2790,6 +2793,39 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			? avopts->multixact_freeze_table_age
 			: default_multixact_freeze_table_age;
 
+		if (relopts)
+		{
+			switch (relopts->vacuum_index_cleanup)
+			{
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_AUTO:
+					index_cleanup = VACOPTVALUE_AUTO;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_ON:
+					index_cleanup = VACOPTVALUE_ENABLED;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_OFF:
+					index_cleanup = VACOPTVALUE_DISABLED;
+					break;
+			}
+		}
+		else
+			index_cleanup = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_truncate_set)
+		{
+			if (relopts->vacuum_truncate)
+				truncate = VACOPTVALUE_ENABLED;
+			else
+				truncate = VACOPTVALUE_DISABLED;
+		}
+		else
+			truncate = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_max_eager_freeze_failure_rate >= 0)
+			max_eager_freeze_failure_rate = relopts->vacuum_max_eager_freeze_failure_rate;
+		else
+			max_eager_freeze_failure_rate = -1.0;
+
 		tab = palloc(sizeof(autovac_table));
 		tab->at_relid = relid;
 		tab->at_sharedrel = classForm->relisshared;
@@ -2806,13 +2842,8 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			(doanalyze ? VACOPT_ANALYZE : 0) |
 			(!wraparound ? VACOPT_SKIP_LOCKED : 0);
 
-		/*
-		 * index_cleanup and truncate are unspecified at first in autovacuum.
-		 * They will be filled in with usable values using their reloptions
-		 * (or reloption defaults) later.
-		 */
-		tab->at_params.index_cleanup = VACOPTVALUE_UNSPECIFIED;
-		tab->at_params.truncate = VACOPTVALUE_UNSPECIFIED;
+		tab->at_params.index_cleanup = index_cleanup;
+		tab->at_params.truncate = truncate;
 		/* As of now, we don't support parallel vacuum for autovacuum */
 		tab->at_params.nworkers = -1;
 		tab->at_params.freeze_min_age = freeze_min_age;
@@ -2822,12 +2853,7 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		tab->at_params.is_wraparound = wraparound;
 		tab->at_params.log_min_duration = log_min_duration;
 		tab->at_params.toast_parent = InvalidOid;
-
-		/*
-		 * Later, in vacuum_rel(), we check reloptions for any
-		 * vacuum_max_eager_freeze_failure_rate override.
-		 */
-		tab->at_params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+		tab->at_params.max_eager_freeze_failure_rate = max_eager_freeze_failure_rate;
 		tab->at_storage_param_vac_cost_limit = avopts ?
 			avopts->vacuum_cost_limit : 0;
 		tab->at_storage_param_vac_cost_delay = avopts ?
-- 
2.39.5 (Apple Git-154)


--QWBYbd5Ar5k8NvSv
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
	filename=v1-0003-autovac-combine-reloptions-correctly.patch



^ permalink  raw  reply  [nested|flat] 804+ messages in thread

* [PATCH v1 2/4] autovac: resolve relopts before vacuuming
@ 2025-06-23 19:42 Nathan Bossart <[email protected]>
  0 siblings, 0 replies; 804+ messages in thread

From: Nathan Bossart @ 2025-06-23 19:42 UTC (permalink / raw)

---
 src/backend/commands/vacuum.c       |  7 ++--
 src/backend/postmaster/autovacuum.c | 52 +++++++++++++++++++++--------
 2 files changed, 44 insertions(+), 15 deletions(-)

diff --git a/src/backend/commands/vacuum.c b/src/backend/commands/vacuum.c
index 33a33bf6b1c..0015b9ef4b0 100644
--- a/src/backend/commands/vacuum.c
+++ b/src/backend/commands/vacuum.c
@@ -421,7 +421,7 @@ ExecVacuum(ParseState *pstate, VacuumStmt *vacstmt, bool isTopLevel)
 	/*
 	 * Later, in vacuum_rel(), we check if a reloption override was specified.
 	 */
-	params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+	params.max_eager_freeze_failure_rate = -1.0;
 
 	/*
 	 * Create special memory context for cross-transaction storage.
@@ -2195,10 +2195,13 @@ vacuum_rel(Oid relid, RangeVar *relation, VacuumParams *params,
 	 * Check if the vacuum_max_eager_freeze_failure_rate table storage
 	 * parameter was specified. This overrides the GUC value.
 	 */
-	if (rel->rd_options != NULL &&
+	if (params->max_eager_freeze_failure_rate < 0 &&
+		rel->rd_options != NULL &&
 		((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate >= 0)
 		params->max_eager_freeze_failure_rate =
 			((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate;
+	else
+		params->max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
 
 	/*
 	 * Set truncate option based on truncate reloption or GUC if it wasn't
diff --git a/src/backend/postmaster/autovacuum.c b/src/backend/postmaster/autovacuum.c
index f86c9fed853..3bedca971ff 100644
--- a/src/backend/postmaster/autovacuum.c
+++ b/src/backend/postmaster/autovacuum.c
@@ -2758,6 +2758,9 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		int			multixact_freeze_table_age;
 		int			log_min_duration;
 		AutoVacOpts *avopts = (relopts ? &relopts->autovacuum : NULL);
+		VacOptValue index_cleanup;
+		VacOptValue truncate;
+		double		max_eager_freeze_failure_rate;
 
 		/*
 		 * Calculate the vacuum cost parameters and the freeze ages.  If there
@@ -2790,6 +2793,39 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			? avopts->multixact_freeze_table_age
 			: default_multixact_freeze_table_age;
 
+		if (relopts)
+		{
+			switch (relopts->vacuum_index_cleanup)
+			{
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_AUTO:
+					index_cleanup = VACOPTVALUE_AUTO;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_ON:
+					index_cleanup = VACOPTVALUE_ENABLED;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_OFF:
+					index_cleanup = VACOPTVALUE_DISABLED;
+					break;
+			}
+		}
+		else
+			index_cleanup = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_truncate_set)
+		{
+			if (relopts->vacuum_truncate)
+				truncate = VACOPTVALUE_ENABLED;
+			else
+				truncate = VACOPTVALUE_DISABLED;
+		}
+		else
+			truncate = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_max_eager_freeze_failure_rate >= 0)
+			max_eager_freeze_failure_rate = relopts->vacuum_max_eager_freeze_failure_rate;
+		else
+			max_eager_freeze_failure_rate = -1.0;
+
 		tab = palloc(sizeof(autovac_table));
 		tab->at_relid = relid;
 		tab->at_sharedrel = classForm->relisshared;
@@ -2806,13 +2842,8 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			(doanalyze ? VACOPT_ANALYZE : 0) |
 			(!wraparound ? VACOPT_SKIP_LOCKED : 0);
 
-		/*
-		 * index_cleanup and truncate are unspecified at first in autovacuum.
-		 * They will be filled in with usable values using their reloptions
-		 * (or reloption defaults) later.
-		 */
-		tab->at_params.index_cleanup = VACOPTVALUE_UNSPECIFIED;
-		tab->at_params.truncate = VACOPTVALUE_UNSPECIFIED;
+		tab->at_params.index_cleanup = index_cleanup;
+		tab->at_params.truncate = truncate;
 		/* As of now, we don't support parallel vacuum for autovacuum */
 		tab->at_params.nworkers = -1;
 		tab->at_params.freeze_min_age = freeze_min_age;
@@ -2822,12 +2853,7 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		tab->at_params.is_wraparound = wraparound;
 		tab->at_params.log_min_duration = log_min_duration;
 		tab->at_params.toast_parent = InvalidOid;
-
-		/*
-		 * Later, in vacuum_rel(), we check reloptions for any
-		 * vacuum_max_eager_freeze_failure_rate override.
-		 */
-		tab->at_params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+		tab->at_params.max_eager_freeze_failure_rate = max_eager_freeze_failure_rate;
 		tab->at_storage_param_vac_cost_limit = avopts ?
 			avopts->vacuum_cost_limit : 0;
 		tab->at_storage_param_vac_cost_delay = avopts ?
-- 
2.39.5 (Apple Git-154)


--QWBYbd5Ar5k8NvSv
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
	filename=v1-0003-autovac-combine-reloptions-correctly.patch



^ permalink  raw  reply  [nested|flat] 804+ messages in thread

* [PATCH v1 2/4] autovac: resolve relopts before vacuuming
@ 2025-06-23 19:42 Nathan Bossart <[email protected]>
  0 siblings, 0 replies; 804+ messages in thread

From: Nathan Bossart @ 2025-06-23 19:42 UTC (permalink / raw)

---
 src/backend/commands/vacuum.c       |  7 ++--
 src/backend/postmaster/autovacuum.c | 52 +++++++++++++++++++++--------
 2 files changed, 44 insertions(+), 15 deletions(-)

diff --git a/src/backend/commands/vacuum.c b/src/backend/commands/vacuum.c
index 33a33bf6b1c..0015b9ef4b0 100644
--- a/src/backend/commands/vacuum.c
+++ b/src/backend/commands/vacuum.c
@@ -421,7 +421,7 @@ ExecVacuum(ParseState *pstate, VacuumStmt *vacstmt, bool isTopLevel)
 	/*
 	 * Later, in vacuum_rel(), we check if a reloption override was specified.
 	 */
-	params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+	params.max_eager_freeze_failure_rate = -1.0;
 
 	/*
 	 * Create special memory context for cross-transaction storage.
@@ -2195,10 +2195,13 @@ vacuum_rel(Oid relid, RangeVar *relation, VacuumParams *params,
 	 * Check if the vacuum_max_eager_freeze_failure_rate table storage
 	 * parameter was specified. This overrides the GUC value.
 	 */
-	if (rel->rd_options != NULL &&
+	if (params->max_eager_freeze_failure_rate < 0 &&
+		rel->rd_options != NULL &&
 		((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate >= 0)
 		params->max_eager_freeze_failure_rate =
 			((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate;
+	else
+		params->max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
 
 	/*
 	 * Set truncate option based on truncate reloption or GUC if it wasn't
diff --git a/src/backend/postmaster/autovacuum.c b/src/backend/postmaster/autovacuum.c
index f86c9fed853..3bedca971ff 100644
--- a/src/backend/postmaster/autovacuum.c
+++ b/src/backend/postmaster/autovacuum.c
@@ -2758,6 +2758,9 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		int			multixact_freeze_table_age;
 		int			log_min_duration;
 		AutoVacOpts *avopts = (relopts ? &relopts->autovacuum : NULL);
+		VacOptValue index_cleanup;
+		VacOptValue truncate;
+		double		max_eager_freeze_failure_rate;
 
 		/*
 		 * Calculate the vacuum cost parameters and the freeze ages.  If there
@@ -2790,6 +2793,39 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			? avopts->multixact_freeze_table_age
 			: default_multixact_freeze_table_age;
 
+		if (relopts)
+		{
+			switch (relopts->vacuum_index_cleanup)
+			{
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_AUTO:
+					index_cleanup = VACOPTVALUE_AUTO;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_ON:
+					index_cleanup = VACOPTVALUE_ENABLED;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_OFF:
+					index_cleanup = VACOPTVALUE_DISABLED;
+					break;
+			}
+		}
+		else
+			index_cleanup = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_truncate_set)
+		{
+			if (relopts->vacuum_truncate)
+				truncate = VACOPTVALUE_ENABLED;
+			else
+				truncate = VACOPTVALUE_DISABLED;
+		}
+		else
+			truncate = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_max_eager_freeze_failure_rate >= 0)
+			max_eager_freeze_failure_rate = relopts->vacuum_max_eager_freeze_failure_rate;
+		else
+			max_eager_freeze_failure_rate = -1.0;
+
 		tab = palloc(sizeof(autovac_table));
 		tab->at_relid = relid;
 		tab->at_sharedrel = classForm->relisshared;
@@ -2806,13 +2842,8 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			(doanalyze ? VACOPT_ANALYZE : 0) |
 			(!wraparound ? VACOPT_SKIP_LOCKED : 0);
 
-		/*
-		 * index_cleanup and truncate are unspecified at first in autovacuum.
-		 * They will be filled in with usable values using their reloptions
-		 * (or reloption defaults) later.
-		 */
-		tab->at_params.index_cleanup = VACOPTVALUE_UNSPECIFIED;
-		tab->at_params.truncate = VACOPTVALUE_UNSPECIFIED;
+		tab->at_params.index_cleanup = index_cleanup;
+		tab->at_params.truncate = truncate;
 		/* As of now, we don't support parallel vacuum for autovacuum */
 		tab->at_params.nworkers = -1;
 		tab->at_params.freeze_min_age = freeze_min_age;
@@ -2822,12 +2853,7 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		tab->at_params.is_wraparound = wraparound;
 		tab->at_params.log_min_duration = log_min_duration;
 		tab->at_params.toast_parent = InvalidOid;
-
-		/*
-		 * Later, in vacuum_rel(), we check reloptions for any
-		 * vacuum_max_eager_freeze_failure_rate override.
-		 */
-		tab->at_params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+		tab->at_params.max_eager_freeze_failure_rate = max_eager_freeze_failure_rate;
 		tab->at_storage_param_vac_cost_limit = avopts ?
 			avopts->vacuum_cost_limit : 0;
 		tab->at_storage_param_vac_cost_delay = avopts ?
-- 
2.39.5 (Apple Git-154)


--QWBYbd5Ar5k8NvSv
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
	filename=v1-0003-autovac-combine-reloptions-correctly.patch



^ permalink  raw  reply  [nested|flat] 804+ messages in thread

* [PATCH v1 2/4] autovac: resolve relopts before vacuuming
@ 2025-06-23 19:42 Nathan Bossart <[email protected]>
  0 siblings, 0 replies; 804+ messages in thread

From: Nathan Bossart @ 2025-06-23 19:42 UTC (permalink / raw)

---
 src/backend/commands/vacuum.c       |  7 ++--
 src/backend/postmaster/autovacuum.c | 52 +++++++++++++++++++++--------
 2 files changed, 44 insertions(+), 15 deletions(-)

diff --git a/src/backend/commands/vacuum.c b/src/backend/commands/vacuum.c
index 33a33bf6b1c..0015b9ef4b0 100644
--- a/src/backend/commands/vacuum.c
+++ b/src/backend/commands/vacuum.c
@@ -421,7 +421,7 @@ ExecVacuum(ParseState *pstate, VacuumStmt *vacstmt, bool isTopLevel)
 	/*
 	 * Later, in vacuum_rel(), we check if a reloption override was specified.
 	 */
-	params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+	params.max_eager_freeze_failure_rate = -1.0;
 
 	/*
 	 * Create special memory context for cross-transaction storage.
@@ -2195,10 +2195,13 @@ vacuum_rel(Oid relid, RangeVar *relation, VacuumParams *params,
 	 * Check if the vacuum_max_eager_freeze_failure_rate table storage
 	 * parameter was specified. This overrides the GUC value.
 	 */
-	if (rel->rd_options != NULL &&
+	if (params->max_eager_freeze_failure_rate < 0 &&
+		rel->rd_options != NULL &&
 		((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate >= 0)
 		params->max_eager_freeze_failure_rate =
 			((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate;
+	else
+		params->max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
 
 	/*
 	 * Set truncate option based on truncate reloption or GUC if it wasn't
diff --git a/src/backend/postmaster/autovacuum.c b/src/backend/postmaster/autovacuum.c
index f86c9fed853..3bedca971ff 100644
--- a/src/backend/postmaster/autovacuum.c
+++ b/src/backend/postmaster/autovacuum.c
@@ -2758,6 +2758,9 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		int			multixact_freeze_table_age;
 		int			log_min_duration;
 		AutoVacOpts *avopts = (relopts ? &relopts->autovacuum : NULL);
+		VacOptValue index_cleanup;
+		VacOptValue truncate;
+		double		max_eager_freeze_failure_rate;
 
 		/*
 		 * Calculate the vacuum cost parameters and the freeze ages.  If there
@@ -2790,6 +2793,39 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			? avopts->multixact_freeze_table_age
 			: default_multixact_freeze_table_age;
 
+		if (relopts)
+		{
+			switch (relopts->vacuum_index_cleanup)
+			{
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_AUTO:
+					index_cleanup = VACOPTVALUE_AUTO;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_ON:
+					index_cleanup = VACOPTVALUE_ENABLED;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_OFF:
+					index_cleanup = VACOPTVALUE_DISABLED;
+					break;
+			}
+		}
+		else
+			index_cleanup = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_truncate_set)
+		{
+			if (relopts->vacuum_truncate)
+				truncate = VACOPTVALUE_ENABLED;
+			else
+				truncate = VACOPTVALUE_DISABLED;
+		}
+		else
+			truncate = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_max_eager_freeze_failure_rate >= 0)
+			max_eager_freeze_failure_rate = relopts->vacuum_max_eager_freeze_failure_rate;
+		else
+			max_eager_freeze_failure_rate = -1.0;
+
 		tab = palloc(sizeof(autovac_table));
 		tab->at_relid = relid;
 		tab->at_sharedrel = classForm->relisshared;
@@ -2806,13 +2842,8 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			(doanalyze ? VACOPT_ANALYZE : 0) |
 			(!wraparound ? VACOPT_SKIP_LOCKED : 0);
 
-		/*
-		 * index_cleanup and truncate are unspecified at first in autovacuum.
-		 * They will be filled in with usable values using their reloptions
-		 * (or reloption defaults) later.
-		 */
-		tab->at_params.index_cleanup = VACOPTVALUE_UNSPECIFIED;
-		tab->at_params.truncate = VACOPTVALUE_UNSPECIFIED;
+		tab->at_params.index_cleanup = index_cleanup;
+		tab->at_params.truncate = truncate;
 		/* As of now, we don't support parallel vacuum for autovacuum */
 		tab->at_params.nworkers = -1;
 		tab->at_params.freeze_min_age = freeze_min_age;
@@ -2822,12 +2853,7 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		tab->at_params.is_wraparound = wraparound;
 		tab->at_params.log_min_duration = log_min_duration;
 		tab->at_params.toast_parent = InvalidOid;
-
-		/*
-		 * Later, in vacuum_rel(), we check reloptions for any
-		 * vacuum_max_eager_freeze_failure_rate override.
-		 */
-		tab->at_params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+		tab->at_params.max_eager_freeze_failure_rate = max_eager_freeze_failure_rate;
 		tab->at_storage_param_vac_cost_limit = avopts ?
 			avopts->vacuum_cost_limit : 0;
 		tab->at_storage_param_vac_cost_delay = avopts ?
-- 
2.39.5 (Apple Git-154)


--QWBYbd5Ar5k8NvSv
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
	filename=v1-0003-autovac-combine-reloptions-correctly.patch



^ permalink  raw  reply  [nested|flat] 804+ messages in thread

* [PATCH v1 2/4] autovac: resolve relopts before vacuuming
@ 2025-06-23 19:42 Nathan Bossart <[email protected]>
  0 siblings, 0 replies; 804+ messages in thread

From: Nathan Bossart @ 2025-06-23 19:42 UTC (permalink / raw)

---
 src/backend/commands/vacuum.c       |  7 ++--
 src/backend/postmaster/autovacuum.c | 52 +++++++++++++++++++++--------
 2 files changed, 44 insertions(+), 15 deletions(-)

diff --git a/src/backend/commands/vacuum.c b/src/backend/commands/vacuum.c
index 33a33bf6b1c..0015b9ef4b0 100644
--- a/src/backend/commands/vacuum.c
+++ b/src/backend/commands/vacuum.c
@@ -421,7 +421,7 @@ ExecVacuum(ParseState *pstate, VacuumStmt *vacstmt, bool isTopLevel)
 	/*
 	 * Later, in vacuum_rel(), we check if a reloption override was specified.
 	 */
-	params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+	params.max_eager_freeze_failure_rate = -1.0;
 
 	/*
 	 * Create special memory context for cross-transaction storage.
@@ -2195,10 +2195,13 @@ vacuum_rel(Oid relid, RangeVar *relation, VacuumParams *params,
 	 * Check if the vacuum_max_eager_freeze_failure_rate table storage
 	 * parameter was specified. This overrides the GUC value.
 	 */
-	if (rel->rd_options != NULL &&
+	if (params->max_eager_freeze_failure_rate < 0 &&
+		rel->rd_options != NULL &&
 		((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate >= 0)
 		params->max_eager_freeze_failure_rate =
 			((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate;
+	else
+		params->max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
 
 	/*
 	 * Set truncate option based on truncate reloption or GUC if it wasn't
diff --git a/src/backend/postmaster/autovacuum.c b/src/backend/postmaster/autovacuum.c
index f86c9fed853..3bedca971ff 100644
--- a/src/backend/postmaster/autovacuum.c
+++ b/src/backend/postmaster/autovacuum.c
@@ -2758,6 +2758,9 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		int			multixact_freeze_table_age;
 		int			log_min_duration;
 		AutoVacOpts *avopts = (relopts ? &relopts->autovacuum : NULL);
+		VacOptValue index_cleanup;
+		VacOptValue truncate;
+		double		max_eager_freeze_failure_rate;
 
 		/*
 		 * Calculate the vacuum cost parameters and the freeze ages.  If there
@@ -2790,6 +2793,39 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			? avopts->multixact_freeze_table_age
 			: default_multixact_freeze_table_age;
 
+		if (relopts)
+		{
+			switch (relopts->vacuum_index_cleanup)
+			{
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_AUTO:
+					index_cleanup = VACOPTVALUE_AUTO;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_ON:
+					index_cleanup = VACOPTVALUE_ENABLED;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_OFF:
+					index_cleanup = VACOPTVALUE_DISABLED;
+					break;
+			}
+		}
+		else
+			index_cleanup = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_truncate_set)
+		{
+			if (relopts->vacuum_truncate)
+				truncate = VACOPTVALUE_ENABLED;
+			else
+				truncate = VACOPTVALUE_DISABLED;
+		}
+		else
+			truncate = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_max_eager_freeze_failure_rate >= 0)
+			max_eager_freeze_failure_rate = relopts->vacuum_max_eager_freeze_failure_rate;
+		else
+			max_eager_freeze_failure_rate = -1.0;
+
 		tab = palloc(sizeof(autovac_table));
 		tab->at_relid = relid;
 		tab->at_sharedrel = classForm->relisshared;
@@ -2806,13 +2842,8 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			(doanalyze ? VACOPT_ANALYZE : 0) |
 			(!wraparound ? VACOPT_SKIP_LOCKED : 0);
 
-		/*
-		 * index_cleanup and truncate are unspecified at first in autovacuum.
-		 * They will be filled in with usable values using their reloptions
-		 * (or reloption defaults) later.
-		 */
-		tab->at_params.index_cleanup = VACOPTVALUE_UNSPECIFIED;
-		tab->at_params.truncate = VACOPTVALUE_UNSPECIFIED;
+		tab->at_params.index_cleanup = index_cleanup;
+		tab->at_params.truncate = truncate;
 		/* As of now, we don't support parallel vacuum for autovacuum */
 		tab->at_params.nworkers = -1;
 		tab->at_params.freeze_min_age = freeze_min_age;
@@ -2822,12 +2853,7 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		tab->at_params.is_wraparound = wraparound;
 		tab->at_params.log_min_duration = log_min_duration;
 		tab->at_params.toast_parent = InvalidOid;
-
-		/*
-		 * Later, in vacuum_rel(), we check reloptions for any
-		 * vacuum_max_eager_freeze_failure_rate override.
-		 */
-		tab->at_params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+		tab->at_params.max_eager_freeze_failure_rate = max_eager_freeze_failure_rate;
 		tab->at_storage_param_vac_cost_limit = avopts ?
 			avopts->vacuum_cost_limit : 0;
 		tab->at_storage_param_vac_cost_delay = avopts ?
-- 
2.39.5 (Apple Git-154)


--QWBYbd5Ar5k8NvSv
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
	filename=v1-0003-autovac-combine-reloptions-correctly.patch



^ permalink  raw  reply  [nested|flat] 804+ messages in thread

* [PATCH v1 2/4] autovac: resolve relopts before vacuuming
@ 2025-06-23 19:42 Nathan Bossart <[email protected]>
  0 siblings, 0 replies; 804+ messages in thread

From: Nathan Bossart @ 2025-06-23 19:42 UTC (permalink / raw)

---
 src/backend/commands/vacuum.c       |  7 ++--
 src/backend/postmaster/autovacuum.c | 52 +++++++++++++++++++++--------
 2 files changed, 44 insertions(+), 15 deletions(-)

diff --git a/src/backend/commands/vacuum.c b/src/backend/commands/vacuum.c
index 33a33bf6b1c..0015b9ef4b0 100644
--- a/src/backend/commands/vacuum.c
+++ b/src/backend/commands/vacuum.c
@@ -421,7 +421,7 @@ ExecVacuum(ParseState *pstate, VacuumStmt *vacstmt, bool isTopLevel)
 	/*
 	 * Later, in vacuum_rel(), we check if a reloption override was specified.
 	 */
-	params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+	params.max_eager_freeze_failure_rate = -1.0;
 
 	/*
 	 * Create special memory context for cross-transaction storage.
@@ -2195,10 +2195,13 @@ vacuum_rel(Oid relid, RangeVar *relation, VacuumParams *params,
 	 * Check if the vacuum_max_eager_freeze_failure_rate table storage
 	 * parameter was specified. This overrides the GUC value.
 	 */
-	if (rel->rd_options != NULL &&
+	if (params->max_eager_freeze_failure_rate < 0 &&
+		rel->rd_options != NULL &&
 		((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate >= 0)
 		params->max_eager_freeze_failure_rate =
 			((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate;
+	else
+		params->max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
 
 	/*
 	 * Set truncate option based on truncate reloption or GUC if it wasn't
diff --git a/src/backend/postmaster/autovacuum.c b/src/backend/postmaster/autovacuum.c
index f86c9fed853..3bedca971ff 100644
--- a/src/backend/postmaster/autovacuum.c
+++ b/src/backend/postmaster/autovacuum.c
@@ -2758,6 +2758,9 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		int			multixact_freeze_table_age;
 		int			log_min_duration;
 		AutoVacOpts *avopts = (relopts ? &relopts->autovacuum : NULL);
+		VacOptValue index_cleanup;
+		VacOptValue truncate;
+		double		max_eager_freeze_failure_rate;
 
 		/*
 		 * Calculate the vacuum cost parameters and the freeze ages.  If there
@@ -2790,6 +2793,39 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			? avopts->multixact_freeze_table_age
 			: default_multixact_freeze_table_age;
 
+		if (relopts)
+		{
+			switch (relopts->vacuum_index_cleanup)
+			{
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_AUTO:
+					index_cleanup = VACOPTVALUE_AUTO;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_ON:
+					index_cleanup = VACOPTVALUE_ENABLED;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_OFF:
+					index_cleanup = VACOPTVALUE_DISABLED;
+					break;
+			}
+		}
+		else
+			index_cleanup = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_truncate_set)
+		{
+			if (relopts->vacuum_truncate)
+				truncate = VACOPTVALUE_ENABLED;
+			else
+				truncate = VACOPTVALUE_DISABLED;
+		}
+		else
+			truncate = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_max_eager_freeze_failure_rate >= 0)
+			max_eager_freeze_failure_rate = relopts->vacuum_max_eager_freeze_failure_rate;
+		else
+			max_eager_freeze_failure_rate = -1.0;
+
 		tab = palloc(sizeof(autovac_table));
 		tab->at_relid = relid;
 		tab->at_sharedrel = classForm->relisshared;
@@ -2806,13 +2842,8 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			(doanalyze ? VACOPT_ANALYZE : 0) |
 			(!wraparound ? VACOPT_SKIP_LOCKED : 0);
 
-		/*
-		 * index_cleanup and truncate are unspecified at first in autovacuum.
-		 * They will be filled in with usable values using their reloptions
-		 * (or reloption defaults) later.
-		 */
-		tab->at_params.index_cleanup = VACOPTVALUE_UNSPECIFIED;
-		tab->at_params.truncate = VACOPTVALUE_UNSPECIFIED;
+		tab->at_params.index_cleanup = index_cleanup;
+		tab->at_params.truncate = truncate;
 		/* As of now, we don't support parallel vacuum for autovacuum */
 		tab->at_params.nworkers = -1;
 		tab->at_params.freeze_min_age = freeze_min_age;
@@ -2822,12 +2853,7 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		tab->at_params.is_wraparound = wraparound;
 		tab->at_params.log_min_duration = log_min_duration;
 		tab->at_params.toast_parent = InvalidOid;
-
-		/*
-		 * Later, in vacuum_rel(), we check reloptions for any
-		 * vacuum_max_eager_freeze_failure_rate override.
-		 */
-		tab->at_params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+		tab->at_params.max_eager_freeze_failure_rate = max_eager_freeze_failure_rate;
 		tab->at_storage_param_vac_cost_limit = avopts ?
 			avopts->vacuum_cost_limit : 0;
 		tab->at_storage_param_vac_cost_delay = avopts ?
-- 
2.39.5 (Apple Git-154)


--QWBYbd5Ar5k8NvSv
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
	filename=v1-0003-autovac-combine-reloptions-correctly.patch



^ permalink  raw  reply  [nested|flat] 804+ messages in thread

* [PATCH v1 2/4] autovac: resolve relopts before vacuuming
@ 2025-06-23 19:42 Nathan Bossart <[email protected]>
  0 siblings, 0 replies; 804+ messages in thread

From: Nathan Bossart @ 2025-06-23 19:42 UTC (permalink / raw)

---
 src/backend/commands/vacuum.c       |  7 ++--
 src/backend/postmaster/autovacuum.c | 52 +++++++++++++++++++++--------
 2 files changed, 44 insertions(+), 15 deletions(-)

diff --git a/src/backend/commands/vacuum.c b/src/backend/commands/vacuum.c
index 33a33bf6b1c..0015b9ef4b0 100644
--- a/src/backend/commands/vacuum.c
+++ b/src/backend/commands/vacuum.c
@@ -421,7 +421,7 @@ ExecVacuum(ParseState *pstate, VacuumStmt *vacstmt, bool isTopLevel)
 	/*
 	 * Later, in vacuum_rel(), we check if a reloption override was specified.
 	 */
-	params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+	params.max_eager_freeze_failure_rate = -1.0;
 
 	/*
 	 * Create special memory context for cross-transaction storage.
@@ -2195,10 +2195,13 @@ vacuum_rel(Oid relid, RangeVar *relation, VacuumParams *params,
 	 * Check if the vacuum_max_eager_freeze_failure_rate table storage
 	 * parameter was specified. This overrides the GUC value.
 	 */
-	if (rel->rd_options != NULL &&
+	if (params->max_eager_freeze_failure_rate < 0 &&
+		rel->rd_options != NULL &&
 		((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate >= 0)
 		params->max_eager_freeze_failure_rate =
 			((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate;
+	else
+		params->max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
 
 	/*
 	 * Set truncate option based on truncate reloption or GUC if it wasn't
diff --git a/src/backend/postmaster/autovacuum.c b/src/backend/postmaster/autovacuum.c
index f86c9fed853..3bedca971ff 100644
--- a/src/backend/postmaster/autovacuum.c
+++ b/src/backend/postmaster/autovacuum.c
@@ -2758,6 +2758,9 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		int			multixact_freeze_table_age;
 		int			log_min_duration;
 		AutoVacOpts *avopts = (relopts ? &relopts->autovacuum : NULL);
+		VacOptValue index_cleanup;
+		VacOptValue truncate;
+		double		max_eager_freeze_failure_rate;
 
 		/*
 		 * Calculate the vacuum cost parameters and the freeze ages.  If there
@@ -2790,6 +2793,39 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			? avopts->multixact_freeze_table_age
 			: default_multixact_freeze_table_age;
 
+		if (relopts)
+		{
+			switch (relopts->vacuum_index_cleanup)
+			{
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_AUTO:
+					index_cleanup = VACOPTVALUE_AUTO;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_ON:
+					index_cleanup = VACOPTVALUE_ENABLED;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_OFF:
+					index_cleanup = VACOPTVALUE_DISABLED;
+					break;
+			}
+		}
+		else
+			index_cleanup = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_truncate_set)
+		{
+			if (relopts->vacuum_truncate)
+				truncate = VACOPTVALUE_ENABLED;
+			else
+				truncate = VACOPTVALUE_DISABLED;
+		}
+		else
+			truncate = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_max_eager_freeze_failure_rate >= 0)
+			max_eager_freeze_failure_rate = relopts->vacuum_max_eager_freeze_failure_rate;
+		else
+			max_eager_freeze_failure_rate = -1.0;
+
 		tab = palloc(sizeof(autovac_table));
 		tab->at_relid = relid;
 		tab->at_sharedrel = classForm->relisshared;
@@ -2806,13 +2842,8 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			(doanalyze ? VACOPT_ANALYZE : 0) |
 			(!wraparound ? VACOPT_SKIP_LOCKED : 0);
 
-		/*
-		 * index_cleanup and truncate are unspecified at first in autovacuum.
-		 * They will be filled in with usable values using their reloptions
-		 * (or reloption defaults) later.
-		 */
-		tab->at_params.index_cleanup = VACOPTVALUE_UNSPECIFIED;
-		tab->at_params.truncate = VACOPTVALUE_UNSPECIFIED;
+		tab->at_params.index_cleanup = index_cleanup;
+		tab->at_params.truncate = truncate;
 		/* As of now, we don't support parallel vacuum for autovacuum */
 		tab->at_params.nworkers = -1;
 		tab->at_params.freeze_min_age = freeze_min_age;
@@ -2822,12 +2853,7 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		tab->at_params.is_wraparound = wraparound;
 		tab->at_params.log_min_duration = log_min_duration;
 		tab->at_params.toast_parent = InvalidOid;
-
-		/*
-		 * Later, in vacuum_rel(), we check reloptions for any
-		 * vacuum_max_eager_freeze_failure_rate override.
-		 */
-		tab->at_params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+		tab->at_params.max_eager_freeze_failure_rate = max_eager_freeze_failure_rate;
 		tab->at_storage_param_vac_cost_limit = avopts ?
 			avopts->vacuum_cost_limit : 0;
 		tab->at_storage_param_vac_cost_delay = avopts ?
-- 
2.39.5 (Apple Git-154)


--QWBYbd5Ar5k8NvSv
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
	filename=v1-0003-autovac-combine-reloptions-correctly.patch



^ permalink  raw  reply  [nested|flat] 804+ messages in thread

* [PATCH v1 2/4] autovac: resolve relopts before vacuuming
@ 2025-06-23 19:42 Nathan Bossart <[email protected]>
  0 siblings, 0 replies; 804+ messages in thread

From: Nathan Bossart @ 2025-06-23 19:42 UTC (permalink / raw)

---
 src/backend/commands/vacuum.c       |  7 ++--
 src/backend/postmaster/autovacuum.c | 52 +++++++++++++++++++++--------
 2 files changed, 44 insertions(+), 15 deletions(-)

diff --git a/src/backend/commands/vacuum.c b/src/backend/commands/vacuum.c
index 33a33bf6b1c..0015b9ef4b0 100644
--- a/src/backend/commands/vacuum.c
+++ b/src/backend/commands/vacuum.c
@@ -421,7 +421,7 @@ ExecVacuum(ParseState *pstate, VacuumStmt *vacstmt, bool isTopLevel)
 	/*
 	 * Later, in vacuum_rel(), we check if a reloption override was specified.
 	 */
-	params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+	params.max_eager_freeze_failure_rate = -1.0;
 
 	/*
 	 * Create special memory context for cross-transaction storage.
@@ -2195,10 +2195,13 @@ vacuum_rel(Oid relid, RangeVar *relation, VacuumParams *params,
 	 * Check if the vacuum_max_eager_freeze_failure_rate table storage
 	 * parameter was specified. This overrides the GUC value.
 	 */
-	if (rel->rd_options != NULL &&
+	if (params->max_eager_freeze_failure_rate < 0 &&
+		rel->rd_options != NULL &&
 		((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate >= 0)
 		params->max_eager_freeze_failure_rate =
 			((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate;
+	else
+		params->max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
 
 	/*
 	 * Set truncate option based on truncate reloption or GUC if it wasn't
diff --git a/src/backend/postmaster/autovacuum.c b/src/backend/postmaster/autovacuum.c
index f86c9fed853..3bedca971ff 100644
--- a/src/backend/postmaster/autovacuum.c
+++ b/src/backend/postmaster/autovacuum.c
@@ -2758,6 +2758,9 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		int			multixact_freeze_table_age;
 		int			log_min_duration;
 		AutoVacOpts *avopts = (relopts ? &relopts->autovacuum : NULL);
+		VacOptValue index_cleanup;
+		VacOptValue truncate;
+		double		max_eager_freeze_failure_rate;
 
 		/*
 		 * Calculate the vacuum cost parameters and the freeze ages.  If there
@@ -2790,6 +2793,39 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			? avopts->multixact_freeze_table_age
 			: default_multixact_freeze_table_age;
 
+		if (relopts)
+		{
+			switch (relopts->vacuum_index_cleanup)
+			{
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_AUTO:
+					index_cleanup = VACOPTVALUE_AUTO;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_ON:
+					index_cleanup = VACOPTVALUE_ENABLED;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_OFF:
+					index_cleanup = VACOPTVALUE_DISABLED;
+					break;
+			}
+		}
+		else
+			index_cleanup = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_truncate_set)
+		{
+			if (relopts->vacuum_truncate)
+				truncate = VACOPTVALUE_ENABLED;
+			else
+				truncate = VACOPTVALUE_DISABLED;
+		}
+		else
+			truncate = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_max_eager_freeze_failure_rate >= 0)
+			max_eager_freeze_failure_rate = relopts->vacuum_max_eager_freeze_failure_rate;
+		else
+			max_eager_freeze_failure_rate = -1.0;
+
 		tab = palloc(sizeof(autovac_table));
 		tab->at_relid = relid;
 		tab->at_sharedrel = classForm->relisshared;
@@ -2806,13 +2842,8 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			(doanalyze ? VACOPT_ANALYZE : 0) |
 			(!wraparound ? VACOPT_SKIP_LOCKED : 0);
 
-		/*
-		 * index_cleanup and truncate are unspecified at first in autovacuum.
-		 * They will be filled in with usable values using their reloptions
-		 * (or reloption defaults) later.
-		 */
-		tab->at_params.index_cleanup = VACOPTVALUE_UNSPECIFIED;
-		tab->at_params.truncate = VACOPTVALUE_UNSPECIFIED;
+		tab->at_params.index_cleanup = index_cleanup;
+		tab->at_params.truncate = truncate;
 		/* As of now, we don't support parallel vacuum for autovacuum */
 		tab->at_params.nworkers = -1;
 		tab->at_params.freeze_min_age = freeze_min_age;
@@ -2822,12 +2853,7 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		tab->at_params.is_wraparound = wraparound;
 		tab->at_params.log_min_duration = log_min_duration;
 		tab->at_params.toast_parent = InvalidOid;
-
-		/*
-		 * Later, in vacuum_rel(), we check reloptions for any
-		 * vacuum_max_eager_freeze_failure_rate override.
-		 */
-		tab->at_params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+		tab->at_params.max_eager_freeze_failure_rate = max_eager_freeze_failure_rate;
 		tab->at_storage_param_vac_cost_limit = avopts ?
 			avopts->vacuum_cost_limit : 0;
 		tab->at_storage_param_vac_cost_delay = avopts ?
-- 
2.39.5 (Apple Git-154)


--QWBYbd5Ar5k8NvSv
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
	filename=v1-0003-autovac-combine-reloptions-correctly.patch



^ permalink  raw  reply  [nested|flat] 804+ messages in thread

* [PATCH v1 2/4] autovac: resolve relopts before vacuuming
@ 2025-06-23 19:42 Nathan Bossart <[email protected]>
  0 siblings, 0 replies; 804+ messages in thread

From: Nathan Bossart @ 2025-06-23 19:42 UTC (permalink / raw)

---
 src/backend/commands/vacuum.c       |  7 ++--
 src/backend/postmaster/autovacuum.c | 52 +++++++++++++++++++++--------
 2 files changed, 44 insertions(+), 15 deletions(-)

diff --git a/src/backend/commands/vacuum.c b/src/backend/commands/vacuum.c
index 33a33bf6b1c..0015b9ef4b0 100644
--- a/src/backend/commands/vacuum.c
+++ b/src/backend/commands/vacuum.c
@@ -421,7 +421,7 @@ ExecVacuum(ParseState *pstate, VacuumStmt *vacstmt, bool isTopLevel)
 	/*
 	 * Later, in vacuum_rel(), we check if a reloption override was specified.
 	 */
-	params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+	params.max_eager_freeze_failure_rate = -1.0;
 
 	/*
 	 * Create special memory context for cross-transaction storage.
@@ -2195,10 +2195,13 @@ vacuum_rel(Oid relid, RangeVar *relation, VacuumParams *params,
 	 * Check if the vacuum_max_eager_freeze_failure_rate table storage
 	 * parameter was specified. This overrides the GUC value.
 	 */
-	if (rel->rd_options != NULL &&
+	if (params->max_eager_freeze_failure_rate < 0 &&
+		rel->rd_options != NULL &&
 		((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate >= 0)
 		params->max_eager_freeze_failure_rate =
 			((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate;
+	else
+		params->max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
 
 	/*
 	 * Set truncate option based on truncate reloption or GUC if it wasn't
diff --git a/src/backend/postmaster/autovacuum.c b/src/backend/postmaster/autovacuum.c
index f86c9fed853..3bedca971ff 100644
--- a/src/backend/postmaster/autovacuum.c
+++ b/src/backend/postmaster/autovacuum.c
@@ -2758,6 +2758,9 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		int			multixact_freeze_table_age;
 		int			log_min_duration;
 		AutoVacOpts *avopts = (relopts ? &relopts->autovacuum : NULL);
+		VacOptValue index_cleanup;
+		VacOptValue truncate;
+		double		max_eager_freeze_failure_rate;
 
 		/*
 		 * Calculate the vacuum cost parameters and the freeze ages.  If there
@@ -2790,6 +2793,39 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			? avopts->multixact_freeze_table_age
 			: default_multixact_freeze_table_age;
 
+		if (relopts)
+		{
+			switch (relopts->vacuum_index_cleanup)
+			{
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_AUTO:
+					index_cleanup = VACOPTVALUE_AUTO;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_ON:
+					index_cleanup = VACOPTVALUE_ENABLED;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_OFF:
+					index_cleanup = VACOPTVALUE_DISABLED;
+					break;
+			}
+		}
+		else
+			index_cleanup = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_truncate_set)
+		{
+			if (relopts->vacuum_truncate)
+				truncate = VACOPTVALUE_ENABLED;
+			else
+				truncate = VACOPTVALUE_DISABLED;
+		}
+		else
+			truncate = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_max_eager_freeze_failure_rate >= 0)
+			max_eager_freeze_failure_rate = relopts->vacuum_max_eager_freeze_failure_rate;
+		else
+			max_eager_freeze_failure_rate = -1.0;
+
 		tab = palloc(sizeof(autovac_table));
 		tab->at_relid = relid;
 		tab->at_sharedrel = classForm->relisshared;
@@ -2806,13 +2842,8 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			(doanalyze ? VACOPT_ANALYZE : 0) |
 			(!wraparound ? VACOPT_SKIP_LOCKED : 0);
 
-		/*
-		 * index_cleanup and truncate are unspecified at first in autovacuum.
-		 * They will be filled in with usable values using their reloptions
-		 * (or reloption defaults) later.
-		 */
-		tab->at_params.index_cleanup = VACOPTVALUE_UNSPECIFIED;
-		tab->at_params.truncate = VACOPTVALUE_UNSPECIFIED;
+		tab->at_params.index_cleanup = index_cleanup;
+		tab->at_params.truncate = truncate;
 		/* As of now, we don't support parallel vacuum for autovacuum */
 		tab->at_params.nworkers = -1;
 		tab->at_params.freeze_min_age = freeze_min_age;
@@ -2822,12 +2853,7 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		tab->at_params.is_wraparound = wraparound;
 		tab->at_params.log_min_duration = log_min_duration;
 		tab->at_params.toast_parent = InvalidOid;
-
-		/*
-		 * Later, in vacuum_rel(), we check reloptions for any
-		 * vacuum_max_eager_freeze_failure_rate override.
-		 */
-		tab->at_params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+		tab->at_params.max_eager_freeze_failure_rate = max_eager_freeze_failure_rate;
 		tab->at_storage_param_vac_cost_limit = avopts ?
 			avopts->vacuum_cost_limit : 0;
 		tab->at_storage_param_vac_cost_delay = avopts ?
-- 
2.39.5 (Apple Git-154)


--QWBYbd5Ar5k8NvSv
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
	filename=v1-0003-autovac-combine-reloptions-correctly.patch



^ permalink  raw  reply  [nested|flat] 804+ messages in thread

* [PATCH v1 2/4] autovac: resolve relopts before vacuuming
@ 2025-06-23 19:42 Nathan Bossart <[email protected]>
  0 siblings, 0 replies; 804+ messages in thread

From: Nathan Bossart @ 2025-06-23 19:42 UTC (permalink / raw)

---
 src/backend/commands/vacuum.c       |  7 ++--
 src/backend/postmaster/autovacuum.c | 52 +++++++++++++++++++++--------
 2 files changed, 44 insertions(+), 15 deletions(-)

diff --git a/src/backend/commands/vacuum.c b/src/backend/commands/vacuum.c
index 33a33bf6b1c..0015b9ef4b0 100644
--- a/src/backend/commands/vacuum.c
+++ b/src/backend/commands/vacuum.c
@@ -421,7 +421,7 @@ ExecVacuum(ParseState *pstate, VacuumStmt *vacstmt, bool isTopLevel)
 	/*
 	 * Later, in vacuum_rel(), we check if a reloption override was specified.
 	 */
-	params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+	params.max_eager_freeze_failure_rate = -1.0;
 
 	/*
 	 * Create special memory context for cross-transaction storage.
@@ -2195,10 +2195,13 @@ vacuum_rel(Oid relid, RangeVar *relation, VacuumParams *params,
 	 * Check if the vacuum_max_eager_freeze_failure_rate table storage
 	 * parameter was specified. This overrides the GUC value.
 	 */
-	if (rel->rd_options != NULL &&
+	if (params->max_eager_freeze_failure_rate < 0 &&
+		rel->rd_options != NULL &&
 		((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate >= 0)
 		params->max_eager_freeze_failure_rate =
 			((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate;
+	else
+		params->max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
 
 	/*
 	 * Set truncate option based on truncate reloption or GUC if it wasn't
diff --git a/src/backend/postmaster/autovacuum.c b/src/backend/postmaster/autovacuum.c
index f86c9fed853..3bedca971ff 100644
--- a/src/backend/postmaster/autovacuum.c
+++ b/src/backend/postmaster/autovacuum.c
@@ -2758,6 +2758,9 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		int			multixact_freeze_table_age;
 		int			log_min_duration;
 		AutoVacOpts *avopts = (relopts ? &relopts->autovacuum : NULL);
+		VacOptValue index_cleanup;
+		VacOptValue truncate;
+		double		max_eager_freeze_failure_rate;
 
 		/*
 		 * Calculate the vacuum cost parameters and the freeze ages.  If there
@@ -2790,6 +2793,39 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			? avopts->multixact_freeze_table_age
 			: default_multixact_freeze_table_age;
 
+		if (relopts)
+		{
+			switch (relopts->vacuum_index_cleanup)
+			{
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_AUTO:
+					index_cleanup = VACOPTVALUE_AUTO;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_ON:
+					index_cleanup = VACOPTVALUE_ENABLED;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_OFF:
+					index_cleanup = VACOPTVALUE_DISABLED;
+					break;
+			}
+		}
+		else
+			index_cleanup = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_truncate_set)
+		{
+			if (relopts->vacuum_truncate)
+				truncate = VACOPTVALUE_ENABLED;
+			else
+				truncate = VACOPTVALUE_DISABLED;
+		}
+		else
+			truncate = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_max_eager_freeze_failure_rate >= 0)
+			max_eager_freeze_failure_rate = relopts->vacuum_max_eager_freeze_failure_rate;
+		else
+			max_eager_freeze_failure_rate = -1.0;
+
 		tab = palloc(sizeof(autovac_table));
 		tab->at_relid = relid;
 		tab->at_sharedrel = classForm->relisshared;
@@ -2806,13 +2842,8 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			(doanalyze ? VACOPT_ANALYZE : 0) |
 			(!wraparound ? VACOPT_SKIP_LOCKED : 0);
 
-		/*
-		 * index_cleanup and truncate are unspecified at first in autovacuum.
-		 * They will be filled in with usable values using their reloptions
-		 * (or reloption defaults) later.
-		 */
-		tab->at_params.index_cleanup = VACOPTVALUE_UNSPECIFIED;
-		tab->at_params.truncate = VACOPTVALUE_UNSPECIFIED;
+		tab->at_params.index_cleanup = index_cleanup;
+		tab->at_params.truncate = truncate;
 		/* As of now, we don't support parallel vacuum for autovacuum */
 		tab->at_params.nworkers = -1;
 		tab->at_params.freeze_min_age = freeze_min_age;
@@ -2822,12 +2853,7 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		tab->at_params.is_wraparound = wraparound;
 		tab->at_params.log_min_duration = log_min_duration;
 		tab->at_params.toast_parent = InvalidOid;
-
-		/*
-		 * Later, in vacuum_rel(), we check reloptions for any
-		 * vacuum_max_eager_freeze_failure_rate override.
-		 */
-		tab->at_params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+		tab->at_params.max_eager_freeze_failure_rate = max_eager_freeze_failure_rate;
 		tab->at_storage_param_vac_cost_limit = avopts ?
 			avopts->vacuum_cost_limit : 0;
 		tab->at_storage_param_vac_cost_delay = avopts ?
-- 
2.39.5 (Apple Git-154)


--QWBYbd5Ar5k8NvSv
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
	filename=v1-0003-autovac-combine-reloptions-correctly.patch



^ permalink  raw  reply  [nested|flat] 804+ messages in thread

* [PATCH v1 2/4] autovac: resolve relopts before vacuuming
@ 2025-06-23 19:42 Nathan Bossart <[email protected]>
  0 siblings, 0 replies; 804+ messages in thread

From: Nathan Bossart @ 2025-06-23 19:42 UTC (permalink / raw)

---
 src/backend/commands/vacuum.c       |  7 ++--
 src/backend/postmaster/autovacuum.c | 52 +++++++++++++++++++++--------
 2 files changed, 44 insertions(+), 15 deletions(-)

diff --git a/src/backend/commands/vacuum.c b/src/backend/commands/vacuum.c
index 33a33bf6b1c..0015b9ef4b0 100644
--- a/src/backend/commands/vacuum.c
+++ b/src/backend/commands/vacuum.c
@@ -421,7 +421,7 @@ ExecVacuum(ParseState *pstate, VacuumStmt *vacstmt, bool isTopLevel)
 	/*
 	 * Later, in vacuum_rel(), we check if a reloption override was specified.
 	 */
-	params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+	params.max_eager_freeze_failure_rate = -1.0;
 
 	/*
 	 * Create special memory context for cross-transaction storage.
@@ -2195,10 +2195,13 @@ vacuum_rel(Oid relid, RangeVar *relation, VacuumParams *params,
 	 * Check if the vacuum_max_eager_freeze_failure_rate table storage
 	 * parameter was specified. This overrides the GUC value.
 	 */
-	if (rel->rd_options != NULL &&
+	if (params->max_eager_freeze_failure_rate < 0 &&
+		rel->rd_options != NULL &&
 		((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate >= 0)
 		params->max_eager_freeze_failure_rate =
 			((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate;
+	else
+		params->max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
 
 	/*
 	 * Set truncate option based on truncate reloption or GUC if it wasn't
diff --git a/src/backend/postmaster/autovacuum.c b/src/backend/postmaster/autovacuum.c
index f86c9fed853..3bedca971ff 100644
--- a/src/backend/postmaster/autovacuum.c
+++ b/src/backend/postmaster/autovacuum.c
@@ -2758,6 +2758,9 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		int			multixact_freeze_table_age;
 		int			log_min_duration;
 		AutoVacOpts *avopts = (relopts ? &relopts->autovacuum : NULL);
+		VacOptValue index_cleanup;
+		VacOptValue truncate;
+		double		max_eager_freeze_failure_rate;
 
 		/*
 		 * Calculate the vacuum cost parameters and the freeze ages.  If there
@@ -2790,6 +2793,39 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			? avopts->multixact_freeze_table_age
 			: default_multixact_freeze_table_age;
 
+		if (relopts)
+		{
+			switch (relopts->vacuum_index_cleanup)
+			{
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_AUTO:
+					index_cleanup = VACOPTVALUE_AUTO;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_ON:
+					index_cleanup = VACOPTVALUE_ENABLED;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_OFF:
+					index_cleanup = VACOPTVALUE_DISABLED;
+					break;
+			}
+		}
+		else
+			index_cleanup = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_truncate_set)
+		{
+			if (relopts->vacuum_truncate)
+				truncate = VACOPTVALUE_ENABLED;
+			else
+				truncate = VACOPTVALUE_DISABLED;
+		}
+		else
+			truncate = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_max_eager_freeze_failure_rate >= 0)
+			max_eager_freeze_failure_rate = relopts->vacuum_max_eager_freeze_failure_rate;
+		else
+			max_eager_freeze_failure_rate = -1.0;
+
 		tab = palloc(sizeof(autovac_table));
 		tab->at_relid = relid;
 		tab->at_sharedrel = classForm->relisshared;
@@ -2806,13 +2842,8 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			(doanalyze ? VACOPT_ANALYZE : 0) |
 			(!wraparound ? VACOPT_SKIP_LOCKED : 0);
 
-		/*
-		 * index_cleanup and truncate are unspecified at first in autovacuum.
-		 * They will be filled in with usable values using their reloptions
-		 * (or reloption defaults) later.
-		 */
-		tab->at_params.index_cleanup = VACOPTVALUE_UNSPECIFIED;
-		tab->at_params.truncate = VACOPTVALUE_UNSPECIFIED;
+		tab->at_params.index_cleanup = index_cleanup;
+		tab->at_params.truncate = truncate;
 		/* As of now, we don't support parallel vacuum for autovacuum */
 		tab->at_params.nworkers = -1;
 		tab->at_params.freeze_min_age = freeze_min_age;
@@ -2822,12 +2853,7 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		tab->at_params.is_wraparound = wraparound;
 		tab->at_params.log_min_duration = log_min_duration;
 		tab->at_params.toast_parent = InvalidOid;
-
-		/*
-		 * Later, in vacuum_rel(), we check reloptions for any
-		 * vacuum_max_eager_freeze_failure_rate override.
-		 */
-		tab->at_params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+		tab->at_params.max_eager_freeze_failure_rate = max_eager_freeze_failure_rate;
 		tab->at_storage_param_vac_cost_limit = avopts ?
 			avopts->vacuum_cost_limit : 0;
 		tab->at_storage_param_vac_cost_delay = avopts ?
-- 
2.39.5 (Apple Git-154)


--QWBYbd5Ar5k8NvSv
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
	filename=v1-0003-autovac-combine-reloptions-correctly.patch



^ permalink  raw  reply  [nested|flat] 804+ messages in thread

* [PATCH v1 2/4] autovac: resolve relopts before vacuuming
@ 2025-06-23 19:42 Nathan Bossart <[email protected]>
  0 siblings, 0 replies; 804+ messages in thread

From: Nathan Bossart @ 2025-06-23 19:42 UTC (permalink / raw)

---
 src/backend/commands/vacuum.c       |  7 ++--
 src/backend/postmaster/autovacuum.c | 52 +++++++++++++++++++++--------
 2 files changed, 44 insertions(+), 15 deletions(-)

diff --git a/src/backend/commands/vacuum.c b/src/backend/commands/vacuum.c
index 33a33bf6b1c..0015b9ef4b0 100644
--- a/src/backend/commands/vacuum.c
+++ b/src/backend/commands/vacuum.c
@@ -421,7 +421,7 @@ ExecVacuum(ParseState *pstate, VacuumStmt *vacstmt, bool isTopLevel)
 	/*
 	 * Later, in vacuum_rel(), we check if a reloption override was specified.
 	 */
-	params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+	params.max_eager_freeze_failure_rate = -1.0;
 
 	/*
 	 * Create special memory context for cross-transaction storage.
@@ -2195,10 +2195,13 @@ vacuum_rel(Oid relid, RangeVar *relation, VacuumParams *params,
 	 * Check if the vacuum_max_eager_freeze_failure_rate table storage
 	 * parameter was specified. This overrides the GUC value.
 	 */
-	if (rel->rd_options != NULL &&
+	if (params->max_eager_freeze_failure_rate < 0 &&
+		rel->rd_options != NULL &&
 		((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate >= 0)
 		params->max_eager_freeze_failure_rate =
 			((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate;
+	else
+		params->max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
 
 	/*
 	 * Set truncate option based on truncate reloption or GUC if it wasn't
diff --git a/src/backend/postmaster/autovacuum.c b/src/backend/postmaster/autovacuum.c
index f86c9fed853..3bedca971ff 100644
--- a/src/backend/postmaster/autovacuum.c
+++ b/src/backend/postmaster/autovacuum.c
@@ -2758,6 +2758,9 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		int			multixact_freeze_table_age;
 		int			log_min_duration;
 		AutoVacOpts *avopts = (relopts ? &relopts->autovacuum : NULL);
+		VacOptValue index_cleanup;
+		VacOptValue truncate;
+		double		max_eager_freeze_failure_rate;
 
 		/*
 		 * Calculate the vacuum cost parameters and the freeze ages.  If there
@@ -2790,6 +2793,39 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			? avopts->multixact_freeze_table_age
 			: default_multixact_freeze_table_age;
 
+		if (relopts)
+		{
+			switch (relopts->vacuum_index_cleanup)
+			{
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_AUTO:
+					index_cleanup = VACOPTVALUE_AUTO;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_ON:
+					index_cleanup = VACOPTVALUE_ENABLED;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_OFF:
+					index_cleanup = VACOPTVALUE_DISABLED;
+					break;
+			}
+		}
+		else
+			index_cleanup = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_truncate_set)
+		{
+			if (relopts->vacuum_truncate)
+				truncate = VACOPTVALUE_ENABLED;
+			else
+				truncate = VACOPTVALUE_DISABLED;
+		}
+		else
+			truncate = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_max_eager_freeze_failure_rate >= 0)
+			max_eager_freeze_failure_rate = relopts->vacuum_max_eager_freeze_failure_rate;
+		else
+			max_eager_freeze_failure_rate = -1.0;
+
 		tab = palloc(sizeof(autovac_table));
 		tab->at_relid = relid;
 		tab->at_sharedrel = classForm->relisshared;
@@ -2806,13 +2842,8 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			(doanalyze ? VACOPT_ANALYZE : 0) |
 			(!wraparound ? VACOPT_SKIP_LOCKED : 0);
 
-		/*
-		 * index_cleanup and truncate are unspecified at first in autovacuum.
-		 * They will be filled in with usable values using their reloptions
-		 * (or reloption defaults) later.
-		 */
-		tab->at_params.index_cleanup = VACOPTVALUE_UNSPECIFIED;
-		tab->at_params.truncate = VACOPTVALUE_UNSPECIFIED;
+		tab->at_params.index_cleanup = index_cleanup;
+		tab->at_params.truncate = truncate;
 		/* As of now, we don't support parallel vacuum for autovacuum */
 		tab->at_params.nworkers = -1;
 		tab->at_params.freeze_min_age = freeze_min_age;
@@ -2822,12 +2853,7 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		tab->at_params.is_wraparound = wraparound;
 		tab->at_params.log_min_duration = log_min_duration;
 		tab->at_params.toast_parent = InvalidOid;
-
-		/*
-		 * Later, in vacuum_rel(), we check reloptions for any
-		 * vacuum_max_eager_freeze_failure_rate override.
-		 */
-		tab->at_params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+		tab->at_params.max_eager_freeze_failure_rate = max_eager_freeze_failure_rate;
 		tab->at_storage_param_vac_cost_limit = avopts ?
 			avopts->vacuum_cost_limit : 0;
 		tab->at_storage_param_vac_cost_delay = avopts ?
-- 
2.39.5 (Apple Git-154)


--QWBYbd5Ar5k8NvSv
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
	filename=v1-0003-autovac-combine-reloptions-correctly.patch



^ permalink  raw  reply  [nested|flat] 804+ messages in thread

* [PATCH v1 2/4] autovac: resolve relopts before vacuuming
@ 2025-06-23 19:42 Nathan Bossart <[email protected]>
  0 siblings, 0 replies; 804+ messages in thread

From: Nathan Bossart @ 2025-06-23 19:42 UTC (permalink / raw)

---
 src/backend/commands/vacuum.c       |  7 ++--
 src/backend/postmaster/autovacuum.c | 52 +++++++++++++++++++++--------
 2 files changed, 44 insertions(+), 15 deletions(-)

diff --git a/src/backend/commands/vacuum.c b/src/backend/commands/vacuum.c
index 33a33bf6b1c..0015b9ef4b0 100644
--- a/src/backend/commands/vacuum.c
+++ b/src/backend/commands/vacuum.c
@@ -421,7 +421,7 @@ ExecVacuum(ParseState *pstate, VacuumStmt *vacstmt, bool isTopLevel)
 	/*
 	 * Later, in vacuum_rel(), we check if a reloption override was specified.
 	 */
-	params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+	params.max_eager_freeze_failure_rate = -1.0;
 
 	/*
 	 * Create special memory context for cross-transaction storage.
@@ -2195,10 +2195,13 @@ vacuum_rel(Oid relid, RangeVar *relation, VacuumParams *params,
 	 * Check if the vacuum_max_eager_freeze_failure_rate table storage
 	 * parameter was specified. This overrides the GUC value.
 	 */
-	if (rel->rd_options != NULL &&
+	if (params->max_eager_freeze_failure_rate < 0 &&
+		rel->rd_options != NULL &&
 		((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate >= 0)
 		params->max_eager_freeze_failure_rate =
 			((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate;
+	else
+		params->max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
 
 	/*
 	 * Set truncate option based on truncate reloption or GUC if it wasn't
diff --git a/src/backend/postmaster/autovacuum.c b/src/backend/postmaster/autovacuum.c
index f86c9fed853..3bedca971ff 100644
--- a/src/backend/postmaster/autovacuum.c
+++ b/src/backend/postmaster/autovacuum.c
@@ -2758,6 +2758,9 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		int			multixact_freeze_table_age;
 		int			log_min_duration;
 		AutoVacOpts *avopts = (relopts ? &relopts->autovacuum : NULL);
+		VacOptValue index_cleanup;
+		VacOptValue truncate;
+		double		max_eager_freeze_failure_rate;
 
 		/*
 		 * Calculate the vacuum cost parameters and the freeze ages.  If there
@@ -2790,6 +2793,39 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			? avopts->multixact_freeze_table_age
 			: default_multixact_freeze_table_age;
 
+		if (relopts)
+		{
+			switch (relopts->vacuum_index_cleanup)
+			{
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_AUTO:
+					index_cleanup = VACOPTVALUE_AUTO;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_ON:
+					index_cleanup = VACOPTVALUE_ENABLED;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_OFF:
+					index_cleanup = VACOPTVALUE_DISABLED;
+					break;
+			}
+		}
+		else
+			index_cleanup = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_truncate_set)
+		{
+			if (relopts->vacuum_truncate)
+				truncate = VACOPTVALUE_ENABLED;
+			else
+				truncate = VACOPTVALUE_DISABLED;
+		}
+		else
+			truncate = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_max_eager_freeze_failure_rate >= 0)
+			max_eager_freeze_failure_rate = relopts->vacuum_max_eager_freeze_failure_rate;
+		else
+			max_eager_freeze_failure_rate = -1.0;
+
 		tab = palloc(sizeof(autovac_table));
 		tab->at_relid = relid;
 		tab->at_sharedrel = classForm->relisshared;
@@ -2806,13 +2842,8 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			(doanalyze ? VACOPT_ANALYZE : 0) |
 			(!wraparound ? VACOPT_SKIP_LOCKED : 0);
 
-		/*
-		 * index_cleanup and truncate are unspecified at first in autovacuum.
-		 * They will be filled in with usable values using their reloptions
-		 * (or reloption defaults) later.
-		 */
-		tab->at_params.index_cleanup = VACOPTVALUE_UNSPECIFIED;
-		tab->at_params.truncate = VACOPTVALUE_UNSPECIFIED;
+		tab->at_params.index_cleanup = index_cleanup;
+		tab->at_params.truncate = truncate;
 		/* As of now, we don't support parallel vacuum for autovacuum */
 		tab->at_params.nworkers = -1;
 		tab->at_params.freeze_min_age = freeze_min_age;
@@ -2822,12 +2853,7 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		tab->at_params.is_wraparound = wraparound;
 		tab->at_params.log_min_duration = log_min_duration;
 		tab->at_params.toast_parent = InvalidOid;
-
-		/*
-		 * Later, in vacuum_rel(), we check reloptions for any
-		 * vacuum_max_eager_freeze_failure_rate override.
-		 */
-		tab->at_params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+		tab->at_params.max_eager_freeze_failure_rate = max_eager_freeze_failure_rate;
 		tab->at_storage_param_vac_cost_limit = avopts ?
 			avopts->vacuum_cost_limit : 0;
 		tab->at_storage_param_vac_cost_delay = avopts ?
-- 
2.39.5 (Apple Git-154)


--QWBYbd5Ar5k8NvSv
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
	filename=v1-0003-autovac-combine-reloptions-correctly.patch



^ permalink  raw  reply  [nested|flat] 804+ messages in thread

* [PATCH v1 2/4] autovac: resolve relopts before vacuuming
@ 2025-06-23 19:42 Nathan Bossart <[email protected]>
  0 siblings, 0 replies; 804+ messages in thread

From: Nathan Bossart @ 2025-06-23 19:42 UTC (permalink / raw)

---
 src/backend/commands/vacuum.c       |  7 ++--
 src/backend/postmaster/autovacuum.c | 52 +++++++++++++++++++++--------
 2 files changed, 44 insertions(+), 15 deletions(-)

diff --git a/src/backend/commands/vacuum.c b/src/backend/commands/vacuum.c
index 33a33bf6b1c..0015b9ef4b0 100644
--- a/src/backend/commands/vacuum.c
+++ b/src/backend/commands/vacuum.c
@@ -421,7 +421,7 @@ ExecVacuum(ParseState *pstate, VacuumStmt *vacstmt, bool isTopLevel)
 	/*
 	 * Later, in vacuum_rel(), we check if a reloption override was specified.
 	 */
-	params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+	params.max_eager_freeze_failure_rate = -1.0;
 
 	/*
 	 * Create special memory context for cross-transaction storage.
@@ -2195,10 +2195,13 @@ vacuum_rel(Oid relid, RangeVar *relation, VacuumParams *params,
 	 * Check if the vacuum_max_eager_freeze_failure_rate table storage
 	 * parameter was specified. This overrides the GUC value.
 	 */
-	if (rel->rd_options != NULL &&
+	if (params->max_eager_freeze_failure_rate < 0 &&
+		rel->rd_options != NULL &&
 		((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate >= 0)
 		params->max_eager_freeze_failure_rate =
 			((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate;
+	else
+		params->max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
 
 	/*
 	 * Set truncate option based on truncate reloption or GUC if it wasn't
diff --git a/src/backend/postmaster/autovacuum.c b/src/backend/postmaster/autovacuum.c
index f86c9fed853..3bedca971ff 100644
--- a/src/backend/postmaster/autovacuum.c
+++ b/src/backend/postmaster/autovacuum.c
@@ -2758,6 +2758,9 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		int			multixact_freeze_table_age;
 		int			log_min_duration;
 		AutoVacOpts *avopts = (relopts ? &relopts->autovacuum : NULL);
+		VacOptValue index_cleanup;
+		VacOptValue truncate;
+		double		max_eager_freeze_failure_rate;
 
 		/*
 		 * Calculate the vacuum cost parameters and the freeze ages.  If there
@@ -2790,6 +2793,39 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			? avopts->multixact_freeze_table_age
 			: default_multixact_freeze_table_age;
 
+		if (relopts)
+		{
+			switch (relopts->vacuum_index_cleanup)
+			{
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_AUTO:
+					index_cleanup = VACOPTVALUE_AUTO;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_ON:
+					index_cleanup = VACOPTVALUE_ENABLED;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_OFF:
+					index_cleanup = VACOPTVALUE_DISABLED;
+					break;
+			}
+		}
+		else
+			index_cleanup = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_truncate_set)
+		{
+			if (relopts->vacuum_truncate)
+				truncate = VACOPTVALUE_ENABLED;
+			else
+				truncate = VACOPTVALUE_DISABLED;
+		}
+		else
+			truncate = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_max_eager_freeze_failure_rate >= 0)
+			max_eager_freeze_failure_rate = relopts->vacuum_max_eager_freeze_failure_rate;
+		else
+			max_eager_freeze_failure_rate = -1.0;
+
 		tab = palloc(sizeof(autovac_table));
 		tab->at_relid = relid;
 		tab->at_sharedrel = classForm->relisshared;
@@ -2806,13 +2842,8 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			(doanalyze ? VACOPT_ANALYZE : 0) |
 			(!wraparound ? VACOPT_SKIP_LOCKED : 0);
 
-		/*
-		 * index_cleanup and truncate are unspecified at first in autovacuum.
-		 * They will be filled in with usable values using their reloptions
-		 * (or reloption defaults) later.
-		 */
-		tab->at_params.index_cleanup = VACOPTVALUE_UNSPECIFIED;
-		tab->at_params.truncate = VACOPTVALUE_UNSPECIFIED;
+		tab->at_params.index_cleanup = index_cleanup;
+		tab->at_params.truncate = truncate;
 		/* As of now, we don't support parallel vacuum for autovacuum */
 		tab->at_params.nworkers = -1;
 		tab->at_params.freeze_min_age = freeze_min_age;
@@ -2822,12 +2853,7 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		tab->at_params.is_wraparound = wraparound;
 		tab->at_params.log_min_duration = log_min_duration;
 		tab->at_params.toast_parent = InvalidOid;
-
-		/*
-		 * Later, in vacuum_rel(), we check reloptions for any
-		 * vacuum_max_eager_freeze_failure_rate override.
-		 */
-		tab->at_params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+		tab->at_params.max_eager_freeze_failure_rate = max_eager_freeze_failure_rate;
 		tab->at_storage_param_vac_cost_limit = avopts ?
 			avopts->vacuum_cost_limit : 0;
 		tab->at_storage_param_vac_cost_delay = avopts ?
-- 
2.39.5 (Apple Git-154)


--QWBYbd5Ar5k8NvSv
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
	filename=v1-0003-autovac-combine-reloptions-correctly.patch



^ permalink  raw  reply  [nested|flat] 804+ messages in thread

* [PATCH v1 2/4] autovac: resolve relopts before vacuuming
@ 2025-06-23 19:42 Nathan Bossart <[email protected]>
  0 siblings, 0 replies; 804+ messages in thread

From: Nathan Bossart @ 2025-06-23 19:42 UTC (permalink / raw)

---
 src/backend/commands/vacuum.c       |  7 ++--
 src/backend/postmaster/autovacuum.c | 52 +++++++++++++++++++++--------
 2 files changed, 44 insertions(+), 15 deletions(-)

diff --git a/src/backend/commands/vacuum.c b/src/backend/commands/vacuum.c
index 33a33bf6b1c..0015b9ef4b0 100644
--- a/src/backend/commands/vacuum.c
+++ b/src/backend/commands/vacuum.c
@@ -421,7 +421,7 @@ ExecVacuum(ParseState *pstate, VacuumStmt *vacstmt, bool isTopLevel)
 	/*
 	 * Later, in vacuum_rel(), we check if a reloption override was specified.
 	 */
-	params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+	params.max_eager_freeze_failure_rate = -1.0;
 
 	/*
 	 * Create special memory context for cross-transaction storage.
@@ -2195,10 +2195,13 @@ vacuum_rel(Oid relid, RangeVar *relation, VacuumParams *params,
 	 * Check if the vacuum_max_eager_freeze_failure_rate table storage
 	 * parameter was specified. This overrides the GUC value.
 	 */
-	if (rel->rd_options != NULL &&
+	if (params->max_eager_freeze_failure_rate < 0 &&
+		rel->rd_options != NULL &&
 		((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate >= 0)
 		params->max_eager_freeze_failure_rate =
 			((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate;
+	else
+		params->max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
 
 	/*
 	 * Set truncate option based on truncate reloption or GUC if it wasn't
diff --git a/src/backend/postmaster/autovacuum.c b/src/backend/postmaster/autovacuum.c
index f86c9fed853..3bedca971ff 100644
--- a/src/backend/postmaster/autovacuum.c
+++ b/src/backend/postmaster/autovacuum.c
@@ -2758,6 +2758,9 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		int			multixact_freeze_table_age;
 		int			log_min_duration;
 		AutoVacOpts *avopts = (relopts ? &relopts->autovacuum : NULL);
+		VacOptValue index_cleanup;
+		VacOptValue truncate;
+		double		max_eager_freeze_failure_rate;
 
 		/*
 		 * Calculate the vacuum cost parameters and the freeze ages.  If there
@@ -2790,6 +2793,39 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			? avopts->multixact_freeze_table_age
 			: default_multixact_freeze_table_age;
 
+		if (relopts)
+		{
+			switch (relopts->vacuum_index_cleanup)
+			{
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_AUTO:
+					index_cleanup = VACOPTVALUE_AUTO;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_ON:
+					index_cleanup = VACOPTVALUE_ENABLED;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_OFF:
+					index_cleanup = VACOPTVALUE_DISABLED;
+					break;
+			}
+		}
+		else
+			index_cleanup = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_truncate_set)
+		{
+			if (relopts->vacuum_truncate)
+				truncate = VACOPTVALUE_ENABLED;
+			else
+				truncate = VACOPTVALUE_DISABLED;
+		}
+		else
+			truncate = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_max_eager_freeze_failure_rate >= 0)
+			max_eager_freeze_failure_rate = relopts->vacuum_max_eager_freeze_failure_rate;
+		else
+			max_eager_freeze_failure_rate = -1.0;
+
 		tab = palloc(sizeof(autovac_table));
 		tab->at_relid = relid;
 		tab->at_sharedrel = classForm->relisshared;
@@ -2806,13 +2842,8 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			(doanalyze ? VACOPT_ANALYZE : 0) |
 			(!wraparound ? VACOPT_SKIP_LOCKED : 0);
 
-		/*
-		 * index_cleanup and truncate are unspecified at first in autovacuum.
-		 * They will be filled in with usable values using their reloptions
-		 * (or reloption defaults) later.
-		 */
-		tab->at_params.index_cleanup = VACOPTVALUE_UNSPECIFIED;
-		tab->at_params.truncate = VACOPTVALUE_UNSPECIFIED;
+		tab->at_params.index_cleanup = index_cleanup;
+		tab->at_params.truncate = truncate;
 		/* As of now, we don't support parallel vacuum for autovacuum */
 		tab->at_params.nworkers = -1;
 		tab->at_params.freeze_min_age = freeze_min_age;
@@ -2822,12 +2853,7 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		tab->at_params.is_wraparound = wraparound;
 		tab->at_params.log_min_duration = log_min_duration;
 		tab->at_params.toast_parent = InvalidOid;
-
-		/*
-		 * Later, in vacuum_rel(), we check reloptions for any
-		 * vacuum_max_eager_freeze_failure_rate override.
-		 */
-		tab->at_params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+		tab->at_params.max_eager_freeze_failure_rate = max_eager_freeze_failure_rate;
 		tab->at_storage_param_vac_cost_limit = avopts ?
 			avopts->vacuum_cost_limit : 0;
 		tab->at_storage_param_vac_cost_delay = avopts ?
-- 
2.39.5 (Apple Git-154)


--QWBYbd5Ar5k8NvSv
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
	filename=v1-0003-autovac-combine-reloptions-correctly.patch



^ permalink  raw  reply  [nested|flat] 804+ messages in thread

* [PATCH v1 2/4] autovac: resolve relopts before vacuuming
@ 2025-06-23 19:42 Nathan Bossart <[email protected]>
  0 siblings, 0 replies; 804+ messages in thread

From: Nathan Bossart @ 2025-06-23 19:42 UTC (permalink / raw)

---
 src/backend/commands/vacuum.c       |  7 ++--
 src/backend/postmaster/autovacuum.c | 52 +++++++++++++++++++++--------
 2 files changed, 44 insertions(+), 15 deletions(-)

diff --git a/src/backend/commands/vacuum.c b/src/backend/commands/vacuum.c
index 33a33bf6b1c..0015b9ef4b0 100644
--- a/src/backend/commands/vacuum.c
+++ b/src/backend/commands/vacuum.c
@@ -421,7 +421,7 @@ ExecVacuum(ParseState *pstate, VacuumStmt *vacstmt, bool isTopLevel)
 	/*
 	 * Later, in vacuum_rel(), we check if a reloption override was specified.
 	 */
-	params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+	params.max_eager_freeze_failure_rate = -1.0;
 
 	/*
 	 * Create special memory context for cross-transaction storage.
@@ -2195,10 +2195,13 @@ vacuum_rel(Oid relid, RangeVar *relation, VacuumParams *params,
 	 * Check if the vacuum_max_eager_freeze_failure_rate table storage
 	 * parameter was specified. This overrides the GUC value.
 	 */
-	if (rel->rd_options != NULL &&
+	if (params->max_eager_freeze_failure_rate < 0 &&
+		rel->rd_options != NULL &&
 		((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate >= 0)
 		params->max_eager_freeze_failure_rate =
 			((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate;
+	else
+		params->max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
 
 	/*
 	 * Set truncate option based on truncate reloption or GUC if it wasn't
diff --git a/src/backend/postmaster/autovacuum.c b/src/backend/postmaster/autovacuum.c
index f86c9fed853..3bedca971ff 100644
--- a/src/backend/postmaster/autovacuum.c
+++ b/src/backend/postmaster/autovacuum.c
@@ -2758,6 +2758,9 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		int			multixact_freeze_table_age;
 		int			log_min_duration;
 		AutoVacOpts *avopts = (relopts ? &relopts->autovacuum : NULL);
+		VacOptValue index_cleanup;
+		VacOptValue truncate;
+		double		max_eager_freeze_failure_rate;
 
 		/*
 		 * Calculate the vacuum cost parameters and the freeze ages.  If there
@@ -2790,6 +2793,39 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			? avopts->multixact_freeze_table_age
 			: default_multixact_freeze_table_age;
 
+		if (relopts)
+		{
+			switch (relopts->vacuum_index_cleanup)
+			{
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_AUTO:
+					index_cleanup = VACOPTVALUE_AUTO;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_ON:
+					index_cleanup = VACOPTVALUE_ENABLED;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_OFF:
+					index_cleanup = VACOPTVALUE_DISABLED;
+					break;
+			}
+		}
+		else
+			index_cleanup = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_truncate_set)
+		{
+			if (relopts->vacuum_truncate)
+				truncate = VACOPTVALUE_ENABLED;
+			else
+				truncate = VACOPTVALUE_DISABLED;
+		}
+		else
+			truncate = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_max_eager_freeze_failure_rate >= 0)
+			max_eager_freeze_failure_rate = relopts->vacuum_max_eager_freeze_failure_rate;
+		else
+			max_eager_freeze_failure_rate = -1.0;
+
 		tab = palloc(sizeof(autovac_table));
 		tab->at_relid = relid;
 		tab->at_sharedrel = classForm->relisshared;
@@ -2806,13 +2842,8 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			(doanalyze ? VACOPT_ANALYZE : 0) |
 			(!wraparound ? VACOPT_SKIP_LOCKED : 0);
 
-		/*
-		 * index_cleanup and truncate are unspecified at first in autovacuum.
-		 * They will be filled in with usable values using their reloptions
-		 * (or reloption defaults) later.
-		 */
-		tab->at_params.index_cleanup = VACOPTVALUE_UNSPECIFIED;
-		tab->at_params.truncate = VACOPTVALUE_UNSPECIFIED;
+		tab->at_params.index_cleanup = index_cleanup;
+		tab->at_params.truncate = truncate;
 		/* As of now, we don't support parallel vacuum for autovacuum */
 		tab->at_params.nworkers = -1;
 		tab->at_params.freeze_min_age = freeze_min_age;
@@ -2822,12 +2853,7 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		tab->at_params.is_wraparound = wraparound;
 		tab->at_params.log_min_duration = log_min_duration;
 		tab->at_params.toast_parent = InvalidOid;
-
-		/*
-		 * Later, in vacuum_rel(), we check reloptions for any
-		 * vacuum_max_eager_freeze_failure_rate override.
-		 */
-		tab->at_params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+		tab->at_params.max_eager_freeze_failure_rate = max_eager_freeze_failure_rate;
 		tab->at_storage_param_vac_cost_limit = avopts ?
 			avopts->vacuum_cost_limit : 0;
 		tab->at_storage_param_vac_cost_delay = avopts ?
-- 
2.39.5 (Apple Git-154)


--QWBYbd5Ar5k8NvSv
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
	filename=v1-0003-autovac-combine-reloptions-correctly.patch



^ permalink  raw  reply  [nested|flat] 804+ messages in thread

* [PATCH v1 2/4] autovac: resolve relopts before vacuuming
@ 2025-06-23 19:42 Nathan Bossart <[email protected]>
  0 siblings, 0 replies; 804+ messages in thread

From: Nathan Bossart @ 2025-06-23 19:42 UTC (permalink / raw)

---
 src/backend/commands/vacuum.c       |  7 ++--
 src/backend/postmaster/autovacuum.c | 52 +++++++++++++++++++++--------
 2 files changed, 44 insertions(+), 15 deletions(-)

diff --git a/src/backend/commands/vacuum.c b/src/backend/commands/vacuum.c
index 33a33bf6b1c..0015b9ef4b0 100644
--- a/src/backend/commands/vacuum.c
+++ b/src/backend/commands/vacuum.c
@@ -421,7 +421,7 @@ ExecVacuum(ParseState *pstate, VacuumStmt *vacstmt, bool isTopLevel)
 	/*
 	 * Later, in vacuum_rel(), we check if a reloption override was specified.
 	 */
-	params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+	params.max_eager_freeze_failure_rate = -1.0;
 
 	/*
 	 * Create special memory context for cross-transaction storage.
@@ -2195,10 +2195,13 @@ vacuum_rel(Oid relid, RangeVar *relation, VacuumParams *params,
 	 * Check if the vacuum_max_eager_freeze_failure_rate table storage
 	 * parameter was specified. This overrides the GUC value.
 	 */
-	if (rel->rd_options != NULL &&
+	if (params->max_eager_freeze_failure_rate < 0 &&
+		rel->rd_options != NULL &&
 		((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate >= 0)
 		params->max_eager_freeze_failure_rate =
 			((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate;
+	else
+		params->max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
 
 	/*
 	 * Set truncate option based on truncate reloption or GUC if it wasn't
diff --git a/src/backend/postmaster/autovacuum.c b/src/backend/postmaster/autovacuum.c
index f86c9fed853..3bedca971ff 100644
--- a/src/backend/postmaster/autovacuum.c
+++ b/src/backend/postmaster/autovacuum.c
@@ -2758,6 +2758,9 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		int			multixact_freeze_table_age;
 		int			log_min_duration;
 		AutoVacOpts *avopts = (relopts ? &relopts->autovacuum : NULL);
+		VacOptValue index_cleanup;
+		VacOptValue truncate;
+		double		max_eager_freeze_failure_rate;
 
 		/*
 		 * Calculate the vacuum cost parameters and the freeze ages.  If there
@@ -2790,6 +2793,39 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			? avopts->multixact_freeze_table_age
 			: default_multixact_freeze_table_age;
 
+		if (relopts)
+		{
+			switch (relopts->vacuum_index_cleanup)
+			{
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_AUTO:
+					index_cleanup = VACOPTVALUE_AUTO;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_ON:
+					index_cleanup = VACOPTVALUE_ENABLED;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_OFF:
+					index_cleanup = VACOPTVALUE_DISABLED;
+					break;
+			}
+		}
+		else
+			index_cleanup = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_truncate_set)
+		{
+			if (relopts->vacuum_truncate)
+				truncate = VACOPTVALUE_ENABLED;
+			else
+				truncate = VACOPTVALUE_DISABLED;
+		}
+		else
+			truncate = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_max_eager_freeze_failure_rate >= 0)
+			max_eager_freeze_failure_rate = relopts->vacuum_max_eager_freeze_failure_rate;
+		else
+			max_eager_freeze_failure_rate = -1.0;
+
 		tab = palloc(sizeof(autovac_table));
 		tab->at_relid = relid;
 		tab->at_sharedrel = classForm->relisshared;
@@ -2806,13 +2842,8 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			(doanalyze ? VACOPT_ANALYZE : 0) |
 			(!wraparound ? VACOPT_SKIP_LOCKED : 0);
 
-		/*
-		 * index_cleanup and truncate are unspecified at first in autovacuum.
-		 * They will be filled in with usable values using their reloptions
-		 * (or reloption defaults) later.
-		 */
-		tab->at_params.index_cleanup = VACOPTVALUE_UNSPECIFIED;
-		tab->at_params.truncate = VACOPTVALUE_UNSPECIFIED;
+		tab->at_params.index_cleanup = index_cleanup;
+		tab->at_params.truncate = truncate;
 		/* As of now, we don't support parallel vacuum for autovacuum */
 		tab->at_params.nworkers = -1;
 		tab->at_params.freeze_min_age = freeze_min_age;
@@ -2822,12 +2853,7 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		tab->at_params.is_wraparound = wraparound;
 		tab->at_params.log_min_duration = log_min_duration;
 		tab->at_params.toast_parent = InvalidOid;
-
-		/*
-		 * Later, in vacuum_rel(), we check reloptions for any
-		 * vacuum_max_eager_freeze_failure_rate override.
-		 */
-		tab->at_params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+		tab->at_params.max_eager_freeze_failure_rate = max_eager_freeze_failure_rate;
 		tab->at_storage_param_vac_cost_limit = avopts ?
 			avopts->vacuum_cost_limit : 0;
 		tab->at_storage_param_vac_cost_delay = avopts ?
-- 
2.39.5 (Apple Git-154)


--QWBYbd5Ar5k8NvSv
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
	filename=v1-0003-autovac-combine-reloptions-correctly.patch



^ permalink  raw  reply  [nested|flat] 804+ messages in thread

* [PATCH v1 2/4] autovac: resolve relopts before vacuuming
@ 2025-06-23 19:42 Nathan Bossart <[email protected]>
  0 siblings, 0 replies; 804+ messages in thread

From: Nathan Bossart @ 2025-06-23 19:42 UTC (permalink / raw)

---
 src/backend/commands/vacuum.c       |  7 ++--
 src/backend/postmaster/autovacuum.c | 52 +++++++++++++++++++++--------
 2 files changed, 44 insertions(+), 15 deletions(-)

diff --git a/src/backend/commands/vacuum.c b/src/backend/commands/vacuum.c
index 33a33bf6b1c..0015b9ef4b0 100644
--- a/src/backend/commands/vacuum.c
+++ b/src/backend/commands/vacuum.c
@@ -421,7 +421,7 @@ ExecVacuum(ParseState *pstate, VacuumStmt *vacstmt, bool isTopLevel)
 	/*
 	 * Later, in vacuum_rel(), we check if a reloption override was specified.
 	 */
-	params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+	params.max_eager_freeze_failure_rate = -1.0;
 
 	/*
 	 * Create special memory context for cross-transaction storage.
@@ -2195,10 +2195,13 @@ vacuum_rel(Oid relid, RangeVar *relation, VacuumParams *params,
 	 * Check if the vacuum_max_eager_freeze_failure_rate table storage
 	 * parameter was specified. This overrides the GUC value.
 	 */
-	if (rel->rd_options != NULL &&
+	if (params->max_eager_freeze_failure_rate < 0 &&
+		rel->rd_options != NULL &&
 		((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate >= 0)
 		params->max_eager_freeze_failure_rate =
 			((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate;
+	else
+		params->max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
 
 	/*
 	 * Set truncate option based on truncate reloption or GUC if it wasn't
diff --git a/src/backend/postmaster/autovacuum.c b/src/backend/postmaster/autovacuum.c
index f86c9fed853..3bedca971ff 100644
--- a/src/backend/postmaster/autovacuum.c
+++ b/src/backend/postmaster/autovacuum.c
@@ -2758,6 +2758,9 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		int			multixact_freeze_table_age;
 		int			log_min_duration;
 		AutoVacOpts *avopts = (relopts ? &relopts->autovacuum : NULL);
+		VacOptValue index_cleanup;
+		VacOptValue truncate;
+		double		max_eager_freeze_failure_rate;
 
 		/*
 		 * Calculate the vacuum cost parameters and the freeze ages.  If there
@@ -2790,6 +2793,39 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			? avopts->multixact_freeze_table_age
 			: default_multixact_freeze_table_age;
 
+		if (relopts)
+		{
+			switch (relopts->vacuum_index_cleanup)
+			{
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_AUTO:
+					index_cleanup = VACOPTVALUE_AUTO;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_ON:
+					index_cleanup = VACOPTVALUE_ENABLED;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_OFF:
+					index_cleanup = VACOPTVALUE_DISABLED;
+					break;
+			}
+		}
+		else
+			index_cleanup = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_truncate_set)
+		{
+			if (relopts->vacuum_truncate)
+				truncate = VACOPTVALUE_ENABLED;
+			else
+				truncate = VACOPTVALUE_DISABLED;
+		}
+		else
+			truncate = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_max_eager_freeze_failure_rate >= 0)
+			max_eager_freeze_failure_rate = relopts->vacuum_max_eager_freeze_failure_rate;
+		else
+			max_eager_freeze_failure_rate = -1.0;
+
 		tab = palloc(sizeof(autovac_table));
 		tab->at_relid = relid;
 		tab->at_sharedrel = classForm->relisshared;
@@ -2806,13 +2842,8 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			(doanalyze ? VACOPT_ANALYZE : 0) |
 			(!wraparound ? VACOPT_SKIP_LOCKED : 0);
 
-		/*
-		 * index_cleanup and truncate are unspecified at first in autovacuum.
-		 * They will be filled in with usable values using their reloptions
-		 * (or reloption defaults) later.
-		 */
-		tab->at_params.index_cleanup = VACOPTVALUE_UNSPECIFIED;
-		tab->at_params.truncate = VACOPTVALUE_UNSPECIFIED;
+		tab->at_params.index_cleanup = index_cleanup;
+		tab->at_params.truncate = truncate;
 		/* As of now, we don't support parallel vacuum for autovacuum */
 		tab->at_params.nworkers = -1;
 		tab->at_params.freeze_min_age = freeze_min_age;
@@ -2822,12 +2853,7 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		tab->at_params.is_wraparound = wraparound;
 		tab->at_params.log_min_duration = log_min_duration;
 		tab->at_params.toast_parent = InvalidOid;
-
-		/*
-		 * Later, in vacuum_rel(), we check reloptions for any
-		 * vacuum_max_eager_freeze_failure_rate override.
-		 */
-		tab->at_params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+		tab->at_params.max_eager_freeze_failure_rate = max_eager_freeze_failure_rate;
 		tab->at_storage_param_vac_cost_limit = avopts ?
 			avopts->vacuum_cost_limit : 0;
 		tab->at_storage_param_vac_cost_delay = avopts ?
-- 
2.39.5 (Apple Git-154)


--QWBYbd5Ar5k8NvSv
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
	filename=v1-0003-autovac-combine-reloptions-correctly.patch



^ permalink  raw  reply  [nested|flat] 804+ messages in thread

* [PATCH v1 2/4] autovac: resolve relopts before vacuuming
@ 2025-06-23 19:42 Nathan Bossart <[email protected]>
  0 siblings, 0 replies; 804+ messages in thread

From: Nathan Bossart @ 2025-06-23 19:42 UTC (permalink / raw)

---
 src/backend/commands/vacuum.c       |  7 ++--
 src/backend/postmaster/autovacuum.c | 52 +++++++++++++++++++++--------
 2 files changed, 44 insertions(+), 15 deletions(-)

diff --git a/src/backend/commands/vacuum.c b/src/backend/commands/vacuum.c
index 33a33bf6b1c..0015b9ef4b0 100644
--- a/src/backend/commands/vacuum.c
+++ b/src/backend/commands/vacuum.c
@@ -421,7 +421,7 @@ ExecVacuum(ParseState *pstate, VacuumStmt *vacstmt, bool isTopLevel)
 	/*
 	 * Later, in vacuum_rel(), we check if a reloption override was specified.
 	 */
-	params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+	params.max_eager_freeze_failure_rate = -1.0;
 
 	/*
 	 * Create special memory context for cross-transaction storage.
@@ -2195,10 +2195,13 @@ vacuum_rel(Oid relid, RangeVar *relation, VacuumParams *params,
 	 * Check if the vacuum_max_eager_freeze_failure_rate table storage
 	 * parameter was specified. This overrides the GUC value.
 	 */
-	if (rel->rd_options != NULL &&
+	if (params->max_eager_freeze_failure_rate < 0 &&
+		rel->rd_options != NULL &&
 		((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate >= 0)
 		params->max_eager_freeze_failure_rate =
 			((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate;
+	else
+		params->max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
 
 	/*
 	 * Set truncate option based on truncate reloption or GUC if it wasn't
diff --git a/src/backend/postmaster/autovacuum.c b/src/backend/postmaster/autovacuum.c
index f86c9fed853..3bedca971ff 100644
--- a/src/backend/postmaster/autovacuum.c
+++ b/src/backend/postmaster/autovacuum.c
@@ -2758,6 +2758,9 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		int			multixact_freeze_table_age;
 		int			log_min_duration;
 		AutoVacOpts *avopts = (relopts ? &relopts->autovacuum : NULL);
+		VacOptValue index_cleanup;
+		VacOptValue truncate;
+		double		max_eager_freeze_failure_rate;
 
 		/*
 		 * Calculate the vacuum cost parameters and the freeze ages.  If there
@@ -2790,6 +2793,39 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			? avopts->multixact_freeze_table_age
 			: default_multixact_freeze_table_age;
 
+		if (relopts)
+		{
+			switch (relopts->vacuum_index_cleanup)
+			{
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_AUTO:
+					index_cleanup = VACOPTVALUE_AUTO;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_ON:
+					index_cleanup = VACOPTVALUE_ENABLED;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_OFF:
+					index_cleanup = VACOPTVALUE_DISABLED;
+					break;
+			}
+		}
+		else
+			index_cleanup = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_truncate_set)
+		{
+			if (relopts->vacuum_truncate)
+				truncate = VACOPTVALUE_ENABLED;
+			else
+				truncate = VACOPTVALUE_DISABLED;
+		}
+		else
+			truncate = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_max_eager_freeze_failure_rate >= 0)
+			max_eager_freeze_failure_rate = relopts->vacuum_max_eager_freeze_failure_rate;
+		else
+			max_eager_freeze_failure_rate = -1.0;
+
 		tab = palloc(sizeof(autovac_table));
 		tab->at_relid = relid;
 		tab->at_sharedrel = classForm->relisshared;
@@ -2806,13 +2842,8 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			(doanalyze ? VACOPT_ANALYZE : 0) |
 			(!wraparound ? VACOPT_SKIP_LOCKED : 0);
 
-		/*
-		 * index_cleanup and truncate are unspecified at first in autovacuum.
-		 * They will be filled in with usable values using their reloptions
-		 * (or reloption defaults) later.
-		 */
-		tab->at_params.index_cleanup = VACOPTVALUE_UNSPECIFIED;
-		tab->at_params.truncate = VACOPTVALUE_UNSPECIFIED;
+		tab->at_params.index_cleanup = index_cleanup;
+		tab->at_params.truncate = truncate;
 		/* As of now, we don't support parallel vacuum for autovacuum */
 		tab->at_params.nworkers = -1;
 		tab->at_params.freeze_min_age = freeze_min_age;
@@ -2822,12 +2853,7 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		tab->at_params.is_wraparound = wraparound;
 		tab->at_params.log_min_duration = log_min_duration;
 		tab->at_params.toast_parent = InvalidOid;
-
-		/*
-		 * Later, in vacuum_rel(), we check reloptions for any
-		 * vacuum_max_eager_freeze_failure_rate override.
-		 */
-		tab->at_params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+		tab->at_params.max_eager_freeze_failure_rate = max_eager_freeze_failure_rate;
 		tab->at_storage_param_vac_cost_limit = avopts ?
 			avopts->vacuum_cost_limit : 0;
 		tab->at_storage_param_vac_cost_delay = avopts ?
-- 
2.39.5 (Apple Git-154)


--QWBYbd5Ar5k8NvSv
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
	filename=v1-0003-autovac-combine-reloptions-correctly.patch



^ permalink  raw  reply  [nested|flat] 804+ messages in thread

* [PATCH v1 2/4] autovac: resolve relopts before vacuuming
@ 2025-06-23 19:42 Nathan Bossart <[email protected]>
  0 siblings, 0 replies; 804+ messages in thread

From: Nathan Bossart @ 2025-06-23 19:42 UTC (permalink / raw)

---
 src/backend/commands/vacuum.c       |  7 ++--
 src/backend/postmaster/autovacuum.c | 52 +++++++++++++++++++++--------
 2 files changed, 44 insertions(+), 15 deletions(-)

diff --git a/src/backend/commands/vacuum.c b/src/backend/commands/vacuum.c
index 33a33bf6b1c..0015b9ef4b0 100644
--- a/src/backend/commands/vacuum.c
+++ b/src/backend/commands/vacuum.c
@@ -421,7 +421,7 @@ ExecVacuum(ParseState *pstate, VacuumStmt *vacstmt, bool isTopLevel)
 	/*
 	 * Later, in vacuum_rel(), we check if a reloption override was specified.
 	 */
-	params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+	params.max_eager_freeze_failure_rate = -1.0;
 
 	/*
 	 * Create special memory context for cross-transaction storage.
@@ -2195,10 +2195,13 @@ vacuum_rel(Oid relid, RangeVar *relation, VacuumParams *params,
 	 * Check if the vacuum_max_eager_freeze_failure_rate table storage
 	 * parameter was specified. This overrides the GUC value.
 	 */
-	if (rel->rd_options != NULL &&
+	if (params->max_eager_freeze_failure_rate < 0 &&
+		rel->rd_options != NULL &&
 		((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate >= 0)
 		params->max_eager_freeze_failure_rate =
 			((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate;
+	else
+		params->max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
 
 	/*
 	 * Set truncate option based on truncate reloption or GUC if it wasn't
diff --git a/src/backend/postmaster/autovacuum.c b/src/backend/postmaster/autovacuum.c
index f86c9fed853..3bedca971ff 100644
--- a/src/backend/postmaster/autovacuum.c
+++ b/src/backend/postmaster/autovacuum.c
@@ -2758,6 +2758,9 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		int			multixact_freeze_table_age;
 		int			log_min_duration;
 		AutoVacOpts *avopts = (relopts ? &relopts->autovacuum : NULL);
+		VacOptValue index_cleanup;
+		VacOptValue truncate;
+		double		max_eager_freeze_failure_rate;
 
 		/*
 		 * Calculate the vacuum cost parameters and the freeze ages.  If there
@@ -2790,6 +2793,39 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			? avopts->multixact_freeze_table_age
 			: default_multixact_freeze_table_age;
 
+		if (relopts)
+		{
+			switch (relopts->vacuum_index_cleanup)
+			{
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_AUTO:
+					index_cleanup = VACOPTVALUE_AUTO;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_ON:
+					index_cleanup = VACOPTVALUE_ENABLED;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_OFF:
+					index_cleanup = VACOPTVALUE_DISABLED;
+					break;
+			}
+		}
+		else
+			index_cleanup = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_truncate_set)
+		{
+			if (relopts->vacuum_truncate)
+				truncate = VACOPTVALUE_ENABLED;
+			else
+				truncate = VACOPTVALUE_DISABLED;
+		}
+		else
+			truncate = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_max_eager_freeze_failure_rate >= 0)
+			max_eager_freeze_failure_rate = relopts->vacuum_max_eager_freeze_failure_rate;
+		else
+			max_eager_freeze_failure_rate = -1.0;
+
 		tab = palloc(sizeof(autovac_table));
 		tab->at_relid = relid;
 		tab->at_sharedrel = classForm->relisshared;
@@ -2806,13 +2842,8 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			(doanalyze ? VACOPT_ANALYZE : 0) |
 			(!wraparound ? VACOPT_SKIP_LOCKED : 0);
 
-		/*
-		 * index_cleanup and truncate are unspecified at first in autovacuum.
-		 * They will be filled in with usable values using their reloptions
-		 * (or reloption defaults) later.
-		 */
-		tab->at_params.index_cleanup = VACOPTVALUE_UNSPECIFIED;
-		tab->at_params.truncate = VACOPTVALUE_UNSPECIFIED;
+		tab->at_params.index_cleanup = index_cleanup;
+		tab->at_params.truncate = truncate;
 		/* As of now, we don't support parallel vacuum for autovacuum */
 		tab->at_params.nworkers = -1;
 		tab->at_params.freeze_min_age = freeze_min_age;
@@ -2822,12 +2853,7 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		tab->at_params.is_wraparound = wraparound;
 		tab->at_params.log_min_duration = log_min_duration;
 		tab->at_params.toast_parent = InvalidOid;
-
-		/*
-		 * Later, in vacuum_rel(), we check reloptions for any
-		 * vacuum_max_eager_freeze_failure_rate override.
-		 */
-		tab->at_params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+		tab->at_params.max_eager_freeze_failure_rate = max_eager_freeze_failure_rate;
 		tab->at_storage_param_vac_cost_limit = avopts ?
 			avopts->vacuum_cost_limit : 0;
 		tab->at_storage_param_vac_cost_delay = avopts ?
-- 
2.39.5 (Apple Git-154)


--QWBYbd5Ar5k8NvSv
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
	filename=v1-0003-autovac-combine-reloptions-correctly.patch



^ permalink  raw  reply  [nested|flat] 804+ messages in thread

* [PATCH v1 2/4] autovac: resolve relopts before vacuuming
@ 2025-06-23 19:42 Nathan Bossart <[email protected]>
  0 siblings, 0 replies; 804+ messages in thread

From: Nathan Bossart @ 2025-06-23 19:42 UTC (permalink / raw)

---
 src/backend/commands/vacuum.c       |  7 ++--
 src/backend/postmaster/autovacuum.c | 52 +++++++++++++++++++++--------
 2 files changed, 44 insertions(+), 15 deletions(-)

diff --git a/src/backend/commands/vacuum.c b/src/backend/commands/vacuum.c
index 33a33bf6b1c..0015b9ef4b0 100644
--- a/src/backend/commands/vacuum.c
+++ b/src/backend/commands/vacuum.c
@@ -421,7 +421,7 @@ ExecVacuum(ParseState *pstate, VacuumStmt *vacstmt, bool isTopLevel)
 	/*
 	 * Later, in vacuum_rel(), we check if a reloption override was specified.
 	 */
-	params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+	params.max_eager_freeze_failure_rate = -1.0;
 
 	/*
 	 * Create special memory context for cross-transaction storage.
@@ -2195,10 +2195,13 @@ vacuum_rel(Oid relid, RangeVar *relation, VacuumParams *params,
 	 * Check if the vacuum_max_eager_freeze_failure_rate table storage
 	 * parameter was specified. This overrides the GUC value.
 	 */
-	if (rel->rd_options != NULL &&
+	if (params->max_eager_freeze_failure_rate < 0 &&
+		rel->rd_options != NULL &&
 		((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate >= 0)
 		params->max_eager_freeze_failure_rate =
 			((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate;
+	else
+		params->max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
 
 	/*
 	 * Set truncate option based on truncate reloption or GUC if it wasn't
diff --git a/src/backend/postmaster/autovacuum.c b/src/backend/postmaster/autovacuum.c
index f86c9fed853..3bedca971ff 100644
--- a/src/backend/postmaster/autovacuum.c
+++ b/src/backend/postmaster/autovacuum.c
@@ -2758,6 +2758,9 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		int			multixact_freeze_table_age;
 		int			log_min_duration;
 		AutoVacOpts *avopts = (relopts ? &relopts->autovacuum : NULL);
+		VacOptValue index_cleanup;
+		VacOptValue truncate;
+		double		max_eager_freeze_failure_rate;
 
 		/*
 		 * Calculate the vacuum cost parameters and the freeze ages.  If there
@@ -2790,6 +2793,39 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			? avopts->multixact_freeze_table_age
 			: default_multixact_freeze_table_age;
 
+		if (relopts)
+		{
+			switch (relopts->vacuum_index_cleanup)
+			{
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_AUTO:
+					index_cleanup = VACOPTVALUE_AUTO;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_ON:
+					index_cleanup = VACOPTVALUE_ENABLED;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_OFF:
+					index_cleanup = VACOPTVALUE_DISABLED;
+					break;
+			}
+		}
+		else
+			index_cleanup = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_truncate_set)
+		{
+			if (relopts->vacuum_truncate)
+				truncate = VACOPTVALUE_ENABLED;
+			else
+				truncate = VACOPTVALUE_DISABLED;
+		}
+		else
+			truncate = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_max_eager_freeze_failure_rate >= 0)
+			max_eager_freeze_failure_rate = relopts->vacuum_max_eager_freeze_failure_rate;
+		else
+			max_eager_freeze_failure_rate = -1.0;
+
 		tab = palloc(sizeof(autovac_table));
 		tab->at_relid = relid;
 		tab->at_sharedrel = classForm->relisshared;
@@ -2806,13 +2842,8 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			(doanalyze ? VACOPT_ANALYZE : 0) |
 			(!wraparound ? VACOPT_SKIP_LOCKED : 0);
 
-		/*
-		 * index_cleanup and truncate are unspecified at first in autovacuum.
-		 * They will be filled in with usable values using their reloptions
-		 * (or reloption defaults) later.
-		 */
-		tab->at_params.index_cleanup = VACOPTVALUE_UNSPECIFIED;
-		tab->at_params.truncate = VACOPTVALUE_UNSPECIFIED;
+		tab->at_params.index_cleanup = index_cleanup;
+		tab->at_params.truncate = truncate;
 		/* As of now, we don't support parallel vacuum for autovacuum */
 		tab->at_params.nworkers = -1;
 		tab->at_params.freeze_min_age = freeze_min_age;
@@ -2822,12 +2853,7 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		tab->at_params.is_wraparound = wraparound;
 		tab->at_params.log_min_duration = log_min_duration;
 		tab->at_params.toast_parent = InvalidOid;
-
-		/*
-		 * Later, in vacuum_rel(), we check reloptions for any
-		 * vacuum_max_eager_freeze_failure_rate override.
-		 */
-		tab->at_params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+		tab->at_params.max_eager_freeze_failure_rate = max_eager_freeze_failure_rate;
 		tab->at_storage_param_vac_cost_limit = avopts ?
 			avopts->vacuum_cost_limit : 0;
 		tab->at_storage_param_vac_cost_delay = avopts ?
-- 
2.39.5 (Apple Git-154)


--QWBYbd5Ar5k8NvSv
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
	filename=v1-0003-autovac-combine-reloptions-correctly.patch



^ permalink  raw  reply  [nested|flat] 804+ messages in thread

* [PATCH v1 2/4] autovac: resolve relopts before vacuuming
@ 2025-06-23 19:42 Nathan Bossart <[email protected]>
  0 siblings, 0 replies; 804+ messages in thread

From: Nathan Bossart @ 2025-06-23 19:42 UTC (permalink / raw)

---
 src/backend/commands/vacuum.c       |  7 ++--
 src/backend/postmaster/autovacuum.c | 52 +++++++++++++++++++++--------
 2 files changed, 44 insertions(+), 15 deletions(-)

diff --git a/src/backend/commands/vacuum.c b/src/backend/commands/vacuum.c
index 33a33bf6b1c..0015b9ef4b0 100644
--- a/src/backend/commands/vacuum.c
+++ b/src/backend/commands/vacuum.c
@@ -421,7 +421,7 @@ ExecVacuum(ParseState *pstate, VacuumStmt *vacstmt, bool isTopLevel)
 	/*
 	 * Later, in vacuum_rel(), we check if a reloption override was specified.
 	 */
-	params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+	params.max_eager_freeze_failure_rate = -1.0;
 
 	/*
 	 * Create special memory context for cross-transaction storage.
@@ -2195,10 +2195,13 @@ vacuum_rel(Oid relid, RangeVar *relation, VacuumParams *params,
 	 * Check if the vacuum_max_eager_freeze_failure_rate table storage
 	 * parameter was specified. This overrides the GUC value.
 	 */
-	if (rel->rd_options != NULL &&
+	if (params->max_eager_freeze_failure_rate < 0 &&
+		rel->rd_options != NULL &&
 		((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate >= 0)
 		params->max_eager_freeze_failure_rate =
 			((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate;
+	else
+		params->max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
 
 	/*
 	 * Set truncate option based on truncate reloption or GUC if it wasn't
diff --git a/src/backend/postmaster/autovacuum.c b/src/backend/postmaster/autovacuum.c
index f86c9fed853..3bedca971ff 100644
--- a/src/backend/postmaster/autovacuum.c
+++ b/src/backend/postmaster/autovacuum.c
@@ -2758,6 +2758,9 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		int			multixact_freeze_table_age;
 		int			log_min_duration;
 		AutoVacOpts *avopts = (relopts ? &relopts->autovacuum : NULL);
+		VacOptValue index_cleanup;
+		VacOptValue truncate;
+		double		max_eager_freeze_failure_rate;
 
 		/*
 		 * Calculate the vacuum cost parameters and the freeze ages.  If there
@@ -2790,6 +2793,39 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			? avopts->multixact_freeze_table_age
 			: default_multixact_freeze_table_age;
 
+		if (relopts)
+		{
+			switch (relopts->vacuum_index_cleanup)
+			{
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_AUTO:
+					index_cleanup = VACOPTVALUE_AUTO;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_ON:
+					index_cleanup = VACOPTVALUE_ENABLED;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_OFF:
+					index_cleanup = VACOPTVALUE_DISABLED;
+					break;
+			}
+		}
+		else
+			index_cleanup = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_truncate_set)
+		{
+			if (relopts->vacuum_truncate)
+				truncate = VACOPTVALUE_ENABLED;
+			else
+				truncate = VACOPTVALUE_DISABLED;
+		}
+		else
+			truncate = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_max_eager_freeze_failure_rate >= 0)
+			max_eager_freeze_failure_rate = relopts->vacuum_max_eager_freeze_failure_rate;
+		else
+			max_eager_freeze_failure_rate = -1.0;
+
 		tab = palloc(sizeof(autovac_table));
 		tab->at_relid = relid;
 		tab->at_sharedrel = classForm->relisshared;
@@ -2806,13 +2842,8 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			(doanalyze ? VACOPT_ANALYZE : 0) |
 			(!wraparound ? VACOPT_SKIP_LOCKED : 0);
 
-		/*
-		 * index_cleanup and truncate are unspecified at first in autovacuum.
-		 * They will be filled in with usable values using their reloptions
-		 * (or reloption defaults) later.
-		 */
-		tab->at_params.index_cleanup = VACOPTVALUE_UNSPECIFIED;
-		tab->at_params.truncate = VACOPTVALUE_UNSPECIFIED;
+		tab->at_params.index_cleanup = index_cleanup;
+		tab->at_params.truncate = truncate;
 		/* As of now, we don't support parallel vacuum for autovacuum */
 		tab->at_params.nworkers = -1;
 		tab->at_params.freeze_min_age = freeze_min_age;
@@ -2822,12 +2853,7 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		tab->at_params.is_wraparound = wraparound;
 		tab->at_params.log_min_duration = log_min_duration;
 		tab->at_params.toast_parent = InvalidOid;
-
-		/*
-		 * Later, in vacuum_rel(), we check reloptions for any
-		 * vacuum_max_eager_freeze_failure_rate override.
-		 */
-		tab->at_params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+		tab->at_params.max_eager_freeze_failure_rate = max_eager_freeze_failure_rate;
 		tab->at_storage_param_vac_cost_limit = avopts ?
 			avopts->vacuum_cost_limit : 0;
 		tab->at_storage_param_vac_cost_delay = avopts ?
-- 
2.39.5 (Apple Git-154)


--QWBYbd5Ar5k8NvSv
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
	filename=v1-0003-autovac-combine-reloptions-correctly.patch



^ permalink  raw  reply  [nested|flat] 804+ messages in thread

* [PATCH v1 2/4] autovac: resolve relopts before vacuuming
@ 2025-06-23 19:42 Nathan Bossart <[email protected]>
  0 siblings, 0 replies; 804+ messages in thread

From: Nathan Bossart @ 2025-06-23 19:42 UTC (permalink / raw)

---
 src/backend/commands/vacuum.c       |  7 ++--
 src/backend/postmaster/autovacuum.c | 52 +++++++++++++++++++++--------
 2 files changed, 44 insertions(+), 15 deletions(-)

diff --git a/src/backend/commands/vacuum.c b/src/backend/commands/vacuum.c
index 33a33bf6b1c..0015b9ef4b0 100644
--- a/src/backend/commands/vacuum.c
+++ b/src/backend/commands/vacuum.c
@@ -421,7 +421,7 @@ ExecVacuum(ParseState *pstate, VacuumStmt *vacstmt, bool isTopLevel)
 	/*
 	 * Later, in vacuum_rel(), we check if a reloption override was specified.
 	 */
-	params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+	params.max_eager_freeze_failure_rate = -1.0;
 
 	/*
 	 * Create special memory context for cross-transaction storage.
@@ -2195,10 +2195,13 @@ vacuum_rel(Oid relid, RangeVar *relation, VacuumParams *params,
 	 * Check if the vacuum_max_eager_freeze_failure_rate table storage
 	 * parameter was specified. This overrides the GUC value.
 	 */
-	if (rel->rd_options != NULL &&
+	if (params->max_eager_freeze_failure_rate < 0 &&
+		rel->rd_options != NULL &&
 		((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate >= 0)
 		params->max_eager_freeze_failure_rate =
 			((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate;
+	else
+		params->max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
 
 	/*
 	 * Set truncate option based on truncate reloption or GUC if it wasn't
diff --git a/src/backend/postmaster/autovacuum.c b/src/backend/postmaster/autovacuum.c
index f86c9fed853..3bedca971ff 100644
--- a/src/backend/postmaster/autovacuum.c
+++ b/src/backend/postmaster/autovacuum.c
@@ -2758,6 +2758,9 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		int			multixact_freeze_table_age;
 		int			log_min_duration;
 		AutoVacOpts *avopts = (relopts ? &relopts->autovacuum : NULL);
+		VacOptValue index_cleanup;
+		VacOptValue truncate;
+		double		max_eager_freeze_failure_rate;
 
 		/*
 		 * Calculate the vacuum cost parameters and the freeze ages.  If there
@@ -2790,6 +2793,39 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			? avopts->multixact_freeze_table_age
 			: default_multixact_freeze_table_age;
 
+		if (relopts)
+		{
+			switch (relopts->vacuum_index_cleanup)
+			{
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_AUTO:
+					index_cleanup = VACOPTVALUE_AUTO;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_ON:
+					index_cleanup = VACOPTVALUE_ENABLED;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_OFF:
+					index_cleanup = VACOPTVALUE_DISABLED;
+					break;
+			}
+		}
+		else
+			index_cleanup = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_truncate_set)
+		{
+			if (relopts->vacuum_truncate)
+				truncate = VACOPTVALUE_ENABLED;
+			else
+				truncate = VACOPTVALUE_DISABLED;
+		}
+		else
+			truncate = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_max_eager_freeze_failure_rate >= 0)
+			max_eager_freeze_failure_rate = relopts->vacuum_max_eager_freeze_failure_rate;
+		else
+			max_eager_freeze_failure_rate = -1.0;
+
 		tab = palloc(sizeof(autovac_table));
 		tab->at_relid = relid;
 		tab->at_sharedrel = classForm->relisshared;
@@ -2806,13 +2842,8 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			(doanalyze ? VACOPT_ANALYZE : 0) |
 			(!wraparound ? VACOPT_SKIP_LOCKED : 0);
 
-		/*
-		 * index_cleanup and truncate are unspecified at first in autovacuum.
-		 * They will be filled in with usable values using their reloptions
-		 * (or reloption defaults) later.
-		 */
-		tab->at_params.index_cleanup = VACOPTVALUE_UNSPECIFIED;
-		tab->at_params.truncate = VACOPTVALUE_UNSPECIFIED;
+		tab->at_params.index_cleanup = index_cleanup;
+		tab->at_params.truncate = truncate;
 		/* As of now, we don't support parallel vacuum for autovacuum */
 		tab->at_params.nworkers = -1;
 		tab->at_params.freeze_min_age = freeze_min_age;
@@ -2822,12 +2853,7 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		tab->at_params.is_wraparound = wraparound;
 		tab->at_params.log_min_duration = log_min_duration;
 		tab->at_params.toast_parent = InvalidOid;
-
-		/*
-		 * Later, in vacuum_rel(), we check reloptions for any
-		 * vacuum_max_eager_freeze_failure_rate override.
-		 */
-		tab->at_params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+		tab->at_params.max_eager_freeze_failure_rate = max_eager_freeze_failure_rate;
 		tab->at_storage_param_vac_cost_limit = avopts ?
 			avopts->vacuum_cost_limit : 0;
 		tab->at_storage_param_vac_cost_delay = avopts ?
-- 
2.39.5 (Apple Git-154)


--QWBYbd5Ar5k8NvSv
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
	filename=v1-0003-autovac-combine-reloptions-correctly.patch



^ permalink  raw  reply  [nested|flat] 804+ messages in thread

* [PATCH v1 2/4] autovac: resolve relopts before vacuuming
@ 2025-06-23 19:42 Nathan Bossart <[email protected]>
  0 siblings, 0 replies; 804+ messages in thread

From: Nathan Bossart @ 2025-06-23 19:42 UTC (permalink / raw)

---
 src/backend/commands/vacuum.c       |  7 ++--
 src/backend/postmaster/autovacuum.c | 52 +++++++++++++++++++++--------
 2 files changed, 44 insertions(+), 15 deletions(-)

diff --git a/src/backend/commands/vacuum.c b/src/backend/commands/vacuum.c
index 33a33bf6b1c..0015b9ef4b0 100644
--- a/src/backend/commands/vacuum.c
+++ b/src/backend/commands/vacuum.c
@@ -421,7 +421,7 @@ ExecVacuum(ParseState *pstate, VacuumStmt *vacstmt, bool isTopLevel)
 	/*
 	 * Later, in vacuum_rel(), we check if a reloption override was specified.
 	 */
-	params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+	params.max_eager_freeze_failure_rate = -1.0;
 
 	/*
 	 * Create special memory context for cross-transaction storage.
@@ -2195,10 +2195,13 @@ vacuum_rel(Oid relid, RangeVar *relation, VacuumParams *params,
 	 * Check if the vacuum_max_eager_freeze_failure_rate table storage
 	 * parameter was specified. This overrides the GUC value.
 	 */
-	if (rel->rd_options != NULL &&
+	if (params->max_eager_freeze_failure_rate < 0 &&
+		rel->rd_options != NULL &&
 		((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate >= 0)
 		params->max_eager_freeze_failure_rate =
 			((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate;
+	else
+		params->max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
 
 	/*
 	 * Set truncate option based on truncate reloption or GUC if it wasn't
diff --git a/src/backend/postmaster/autovacuum.c b/src/backend/postmaster/autovacuum.c
index f86c9fed853..3bedca971ff 100644
--- a/src/backend/postmaster/autovacuum.c
+++ b/src/backend/postmaster/autovacuum.c
@@ -2758,6 +2758,9 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		int			multixact_freeze_table_age;
 		int			log_min_duration;
 		AutoVacOpts *avopts = (relopts ? &relopts->autovacuum : NULL);
+		VacOptValue index_cleanup;
+		VacOptValue truncate;
+		double		max_eager_freeze_failure_rate;
 
 		/*
 		 * Calculate the vacuum cost parameters and the freeze ages.  If there
@@ -2790,6 +2793,39 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			? avopts->multixact_freeze_table_age
 			: default_multixact_freeze_table_age;
 
+		if (relopts)
+		{
+			switch (relopts->vacuum_index_cleanup)
+			{
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_AUTO:
+					index_cleanup = VACOPTVALUE_AUTO;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_ON:
+					index_cleanup = VACOPTVALUE_ENABLED;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_OFF:
+					index_cleanup = VACOPTVALUE_DISABLED;
+					break;
+			}
+		}
+		else
+			index_cleanup = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_truncate_set)
+		{
+			if (relopts->vacuum_truncate)
+				truncate = VACOPTVALUE_ENABLED;
+			else
+				truncate = VACOPTVALUE_DISABLED;
+		}
+		else
+			truncate = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_max_eager_freeze_failure_rate >= 0)
+			max_eager_freeze_failure_rate = relopts->vacuum_max_eager_freeze_failure_rate;
+		else
+			max_eager_freeze_failure_rate = -1.0;
+
 		tab = palloc(sizeof(autovac_table));
 		tab->at_relid = relid;
 		tab->at_sharedrel = classForm->relisshared;
@@ -2806,13 +2842,8 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			(doanalyze ? VACOPT_ANALYZE : 0) |
 			(!wraparound ? VACOPT_SKIP_LOCKED : 0);
 
-		/*
-		 * index_cleanup and truncate are unspecified at first in autovacuum.
-		 * They will be filled in with usable values using their reloptions
-		 * (or reloption defaults) later.
-		 */
-		tab->at_params.index_cleanup = VACOPTVALUE_UNSPECIFIED;
-		tab->at_params.truncate = VACOPTVALUE_UNSPECIFIED;
+		tab->at_params.index_cleanup = index_cleanup;
+		tab->at_params.truncate = truncate;
 		/* As of now, we don't support parallel vacuum for autovacuum */
 		tab->at_params.nworkers = -1;
 		tab->at_params.freeze_min_age = freeze_min_age;
@@ -2822,12 +2853,7 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		tab->at_params.is_wraparound = wraparound;
 		tab->at_params.log_min_duration = log_min_duration;
 		tab->at_params.toast_parent = InvalidOid;
-
-		/*
-		 * Later, in vacuum_rel(), we check reloptions for any
-		 * vacuum_max_eager_freeze_failure_rate override.
-		 */
-		tab->at_params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+		tab->at_params.max_eager_freeze_failure_rate = max_eager_freeze_failure_rate;
 		tab->at_storage_param_vac_cost_limit = avopts ?
 			avopts->vacuum_cost_limit : 0;
 		tab->at_storage_param_vac_cost_delay = avopts ?
-- 
2.39.5 (Apple Git-154)


--QWBYbd5Ar5k8NvSv
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
	filename=v1-0003-autovac-combine-reloptions-correctly.patch



^ permalink  raw  reply  [nested|flat] 804+ messages in thread

* [PATCH v1 2/4] autovac: resolve relopts before vacuuming
@ 2025-06-23 19:42 Nathan Bossart <[email protected]>
  0 siblings, 0 replies; 804+ messages in thread

From: Nathan Bossart @ 2025-06-23 19:42 UTC (permalink / raw)

---
 src/backend/commands/vacuum.c       |  7 ++--
 src/backend/postmaster/autovacuum.c | 52 +++++++++++++++++++++--------
 2 files changed, 44 insertions(+), 15 deletions(-)

diff --git a/src/backend/commands/vacuum.c b/src/backend/commands/vacuum.c
index 33a33bf6b1c..0015b9ef4b0 100644
--- a/src/backend/commands/vacuum.c
+++ b/src/backend/commands/vacuum.c
@@ -421,7 +421,7 @@ ExecVacuum(ParseState *pstate, VacuumStmt *vacstmt, bool isTopLevel)
 	/*
 	 * Later, in vacuum_rel(), we check if a reloption override was specified.
 	 */
-	params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+	params.max_eager_freeze_failure_rate = -1.0;
 
 	/*
 	 * Create special memory context for cross-transaction storage.
@@ -2195,10 +2195,13 @@ vacuum_rel(Oid relid, RangeVar *relation, VacuumParams *params,
 	 * Check if the vacuum_max_eager_freeze_failure_rate table storage
 	 * parameter was specified. This overrides the GUC value.
 	 */
-	if (rel->rd_options != NULL &&
+	if (params->max_eager_freeze_failure_rate < 0 &&
+		rel->rd_options != NULL &&
 		((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate >= 0)
 		params->max_eager_freeze_failure_rate =
 			((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate;
+	else
+		params->max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
 
 	/*
 	 * Set truncate option based on truncate reloption or GUC if it wasn't
diff --git a/src/backend/postmaster/autovacuum.c b/src/backend/postmaster/autovacuum.c
index f86c9fed853..3bedca971ff 100644
--- a/src/backend/postmaster/autovacuum.c
+++ b/src/backend/postmaster/autovacuum.c
@@ -2758,6 +2758,9 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		int			multixact_freeze_table_age;
 		int			log_min_duration;
 		AutoVacOpts *avopts = (relopts ? &relopts->autovacuum : NULL);
+		VacOptValue index_cleanup;
+		VacOptValue truncate;
+		double		max_eager_freeze_failure_rate;
 
 		/*
 		 * Calculate the vacuum cost parameters and the freeze ages.  If there
@@ -2790,6 +2793,39 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			? avopts->multixact_freeze_table_age
 			: default_multixact_freeze_table_age;
 
+		if (relopts)
+		{
+			switch (relopts->vacuum_index_cleanup)
+			{
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_AUTO:
+					index_cleanup = VACOPTVALUE_AUTO;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_ON:
+					index_cleanup = VACOPTVALUE_ENABLED;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_OFF:
+					index_cleanup = VACOPTVALUE_DISABLED;
+					break;
+			}
+		}
+		else
+			index_cleanup = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_truncate_set)
+		{
+			if (relopts->vacuum_truncate)
+				truncate = VACOPTVALUE_ENABLED;
+			else
+				truncate = VACOPTVALUE_DISABLED;
+		}
+		else
+			truncate = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_max_eager_freeze_failure_rate >= 0)
+			max_eager_freeze_failure_rate = relopts->vacuum_max_eager_freeze_failure_rate;
+		else
+			max_eager_freeze_failure_rate = -1.0;
+
 		tab = palloc(sizeof(autovac_table));
 		tab->at_relid = relid;
 		tab->at_sharedrel = classForm->relisshared;
@@ -2806,13 +2842,8 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			(doanalyze ? VACOPT_ANALYZE : 0) |
 			(!wraparound ? VACOPT_SKIP_LOCKED : 0);
 
-		/*
-		 * index_cleanup and truncate are unspecified at first in autovacuum.
-		 * They will be filled in with usable values using their reloptions
-		 * (or reloption defaults) later.
-		 */
-		tab->at_params.index_cleanup = VACOPTVALUE_UNSPECIFIED;
-		tab->at_params.truncate = VACOPTVALUE_UNSPECIFIED;
+		tab->at_params.index_cleanup = index_cleanup;
+		tab->at_params.truncate = truncate;
 		/* As of now, we don't support parallel vacuum for autovacuum */
 		tab->at_params.nworkers = -1;
 		tab->at_params.freeze_min_age = freeze_min_age;
@@ -2822,12 +2853,7 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		tab->at_params.is_wraparound = wraparound;
 		tab->at_params.log_min_duration = log_min_duration;
 		tab->at_params.toast_parent = InvalidOid;
-
-		/*
-		 * Later, in vacuum_rel(), we check reloptions for any
-		 * vacuum_max_eager_freeze_failure_rate override.
-		 */
-		tab->at_params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+		tab->at_params.max_eager_freeze_failure_rate = max_eager_freeze_failure_rate;
 		tab->at_storage_param_vac_cost_limit = avopts ?
 			avopts->vacuum_cost_limit : 0;
 		tab->at_storage_param_vac_cost_delay = avopts ?
-- 
2.39.5 (Apple Git-154)


--QWBYbd5Ar5k8NvSv
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
	filename=v1-0003-autovac-combine-reloptions-correctly.patch



^ permalink  raw  reply  [nested|flat] 804+ messages in thread

* [PATCH v1 2/4] autovac: resolve relopts before vacuuming
@ 2025-06-23 19:42 Nathan Bossart <[email protected]>
  0 siblings, 0 replies; 804+ messages in thread

From: Nathan Bossart @ 2025-06-23 19:42 UTC (permalink / raw)

---
 src/backend/commands/vacuum.c       |  7 ++--
 src/backend/postmaster/autovacuum.c | 52 +++++++++++++++++++++--------
 2 files changed, 44 insertions(+), 15 deletions(-)

diff --git a/src/backend/commands/vacuum.c b/src/backend/commands/vacuum.c
index 33a33bf6b1c..0015b9ef4b0 100644
--- a/src/backend/commands/vacuum.c
+++ b/src/backend/commands/vacuum.c
@@ -421,7 +421,7 @@ ExecVacuum(ParseState *pstate, VacuumStmt *vacstmt, bool isTopLevel)
 	/*
 	 * Later, in vacuum_rel(), we check if a reloption override was specified.
 	 */
-	params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+	params.max_eager_freeze_failure_rate = -1.0;
 
 	/*
 	 * Create special memory context for cross-transaction storage.
@@ -2195,10 +2195,13 @@ vacuum_rel(Oid relid, RangeVar *relation, VacuumParams *params,
 	 * Check if the vacuum_max_eager_freeze_failure_rate table storage
 	 * parameter was specified. This overrides the GUC value.
 	 */
-	if (rel->rd_options != NULL &&
+	if (params->max_eager_freeze_failure_rate < 0 &&
+		rel->rd_options != NULL &&
 		((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate >= 0)
 		params->max_eager_freeze_failure_rate =
 			((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate;
+	else
+		params->max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
 
 	/*
 	 * Set truncate option based on truncate reloption or GUC if it wasn't
diff --git a/src/backend/postmaster/autovacuum.c b/src/backend/postmaster/autovacuum.c
index f86c9fed853..3bedca971ff 100644
--- a/src/backend/postmaster/autovacuum.c
+++ b/src/backend/postmaster/autovacuum.c
@@ -2758,6 +2758,9 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		int			multixact_freeze_table_age;
 		int			log_min_duration;
 		AutoVacOpts *avopts = (relopts ? &relopts->autovacuum : NULL);
+		VacOptValue index_cleanup;
+		VacOptValue truncate;
+		double		max_eager_freeze_failure_rate;
 
 		/*
 		 * Calculate the vacuum cost parameters and the freeze ages.  If there
@@ -2790,6 +2793,39 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			? avopts->multixact_freeze_table_age
 			: default_multixact_freeze_table_age;
 
+		if (relopts)
+		{
+			switch (relopts->vacuum_index_cleanup)
+			{
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_AUTO:
+					index_cleanup = VACOPTVALUE_AUTO;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_ON:
+					index_cleanup = VACOPTVALUE_ENABLED;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_OFF:
+					index_cleanup = VACOPTVALUE_DISABLED;
+					break;
+			}
+		}
+		else
+			index_cleanup = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_truncate_set)
+		{
+			if (relopts->vacuum_truncate)
+				truncate = VACOPTVALUE_ENABLED;
+			else
+				truncate = VACOPTVALUE_DISABLED;
+		}
+		else
+			truncate = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_max_eager_freeze_failure_rate >= 0)
+			max_eager_freeze_failure_rate = relopts->vacuum_max_eager_freeze_failure_rate;
+		else
+			max_eager_freeze_failure_rate = -1.0;
+
 		tab = palloc(sizeof(autovac_table));
 		tab->at_relid = relid;
 		tab->at_sharedrel = classForm->relisshared;
@@ -2806,13 +2842,8 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			(doanalyze ? VACOPT_ANALYZE : 0) |
 			(!wraparound ? VACOPT_SKIP_LOCKED : 0);
 
-		/*
-		 * index_cleanup and truncate are unspecified at first in autovacuum.
-		 * They will be filled in with usable values using their reloptions
-		 * (or reloption defaults) later.
-		 */
-		tab->at_params.index_cleanup = VACOPTVALUE_UNSPECIFIED;
-		tab->at_params.truncate = VACOPTVALUE_UNSPECIFIED;
+		tab->at_params.index_cleanup = index_cleanup;
+		tab->at_params.truncate = truncate;
 		/* As of now, we don't support parallel vacuum for autovacuum */
 		tab->at_params.nworkers = -1;
 		tab->at_params.freeze_min_age = freeze_min_age;
@@ -2822,12 +2853,7 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		tab->at_params.is_wraparound = wraparound;
 		tab->at_params.log_min_duration = log_min_duration;
 		tab->at_params.toast_parent = InvalidOid;
-
-		/*
-		 * Later, in vacuum_rel(), we check reloptions for any
-		 * vacuum_max_eager_freeze_failure_rate override.
-		 */
-		tab->at_params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+		tab->at_params.max_eager_freeze_failure_rate = max_eager_freeze_failure_rate;
 		tab->at_storage_param_vac_cost_limit = avopts ?
 			avopts->vacuum_cost_limit : 0;
 		tab->at_storage_param_vac_cost_delay = avopts ?
-- 
2.39.5 (Apple Git-154)


--QWBYbd5Ar5k8NvSv
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
	filename=v1-0003-autovac-combine-reloptions-correctly.patch



^ permalink  raw  reply  [nested|flat] 804+ messages in thread

* [PATCH v1 2/4] autovac: resolve relopts before vacuuming
@ 2025-06-23 19:42 Nathan Bossart <[email protected]>
  0 siblings, 0 replies; 804+ messages in thread

From: Nathan Bossart @ 2025-06-23 19:42 UTC (permalink / raw)

---
 src/backend/commands/vacuum.c       |  7 ++--
 src/backend/postmaster/autovacuum.c | 52 +++++++++++++++++++++--------
 2 files changed, 44 insertions(+), 15 deletions(-)

diff --git a/src/backend/commands/vacuum.c b/src/backend/commands/vacuum.c
index 33a33bf6b1c..0015b9ef4b0 100644
--- a/src/backend/commands/vacuum.c
+++ b/src/backend/commands/vacuum.c
@@ -421,7 +421,7 @@ ExecVacuum(ParseState *pstate, VacuumStmt *vacstmt, bool isTopLevel)
 	/*
 	 * Later, in vacuum_rel(), we check if a reloption override was specified.
 	 */
-	params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+	params.max_eager_freeze_failure_rate = -1.0;
 
 	/*
 	 * Create special memory context for cross-transaction storage.
@@ -2195,10 +2195,13 @@ vacuum_rel(Oid relid, RangeVar *relation, VacuumParams *params,
 	 * Check if the vacuum_max_eager_freeze_failure_rate table storage
 	 * parameter was specified. This overrides the GUC value.
 	 */
-	if (rel->rd_options != NULL &&
+	if (params->max_eager_freeze_failure_rate < 0 &&
+		rel->rd_options != NULL &&
 		((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate >= 0)
 		params->max_eager_freeze_failure_rate =
 			((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate;
+	else
+		params->max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
 
 	/*
 	 * Set truncate option based on truncate reloption or GUC if it wasn't
diff --git a/src/backend/postmaster/autovacuum.c b/src/backend/postmaster/autovacuum.c
index f86c9fed853..3bedca971ff 100644
--- a/src/backend/postmaster/autovacuum.c
+++ b/src/backend/postmaster/autovacuum.c
@@ -2758,6 +2758,9 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		int			multixact_freeze_table_age;
 		int			log_min_duration;
 		AutoVacOpts *avopts = (relopts ? &relopts->autovacuum : NULL);
+		VacOptValue index_cleanup;
+		VacOptValue truncate;
+		double		max_eager_freeze_failure_rate;
 
 		/*
 		 * Calculate the vacuum cost parameters and the freeze ages.  If there
@@ -2790,6 +2793,39 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			? avopts->multixact_freeze_table_age
 			: default_multixact_freeze_table_age;
 
+		if (relopts)
+		{
+			switch (relopts->vacuum_index_cleanup)
+			{
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_AUTO:
+					index_cleanup = VACOPTVALUE_AUTO;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_ON:
+					index_cleanup = VACOPTVALUE_ENABLED;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_OFF:
+					index_cleanup = VACOPTVALUE_DISABLED;
+					break;
+			}
+		}
+		else
+			index_cleanup = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_truncate_set)
+		{
+			if (relopts->vacuum_truncate)
+				truncate = VACOPTVALUE_ENABLED;
+			else
+				truncate = VACOPTVALUE_DISABLED;
+		}
+		else
+			truncate = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_max_eager_freeze_failure_rate >= 0)
+			max_eager_freeze_failure_rate = relopts->vacuum_max_eager_freeze_failure_rate;
+		else
+			max_eager_freeze_failure_rate = -1.0;
+
 		tab = palloc(sizeof(autovac_table));
 		tab->at_relid = relid;
 		tab->at_sharedrel = classForm->relisshared;
@@ -2806,13 +2842,8 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			(doanalyze ? VACOPT_ANALYZE : 0) |
 			(!wraparound ? VACOPT_SKIP_LOCKED : 0);
 
-		/*
-		 * index_cleanup and truncate are unspecified at first in autovacuum.
-		 * They will be filled in with usable values using their reloptions
-		 * (or reloption defaults) later.
-		 */
-		tab->at_params.index_cleanup = VACOPTVALUE_UNSPECIFIED;
-		tab->at_params.truncate = VACOPTVALUE_UNSPECIFIED;
+		tab->at_params.index_cleanup = index_cleanup;
+		tab->at_params.truncate = truncate;
 		/* As of now, we don't support parallel vacuum for autovacuum */
 		tab->at_params.nworkers = -1;
 		tab->at_params.freeze_min_age = freeze_min_age;
@@ -2822,12 +2853,7 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		tab->at_params.is_wraparound = wraparound;
 		tab->at_params.log_min_duration = log_min_duration;
 		tab->at_params.toast_parent = InvalidOid;
-
-		/*
-		 * Later, in vacuum_rel(), we check reloptions for any
-		 * vacuum_max_eager_freeze_failure_rate override.
-		 */
-		tab->at_params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+		tab->at_params.max_eager_freeze_failure_rate = max_eager_freeze_failure_rate;
 		tab->at_storage_param_vac_cost_limit = avopts ?
 			avopts->vacuum_cost_limit : 0;
 		tab->at_storage_param_vac_cost_delay = avopts ?
-- 
2.39.5 (Apple Git-154)


--QWBYbd5Ar5k8NvSv
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
	filename=v1-0003-autovac-combine-reloptions-correctly.patch



^ permalink  raw  reply  [nested|flat] 804+ messages in thread

* [PATCH v1 2/4] autovac: resolve relopts before vacuuming
@ 2025-06-23 19:42 Nathan Bossart <[email protected]>
  0 siblings, 0 replies; 804+ messages in thread

From: Nathan Bossart @ 2025-06-23 19:42 UTC (permalink / raw)

---
 src/backend/commands/vacuum.c       |  7 ++--
 src/backend/postmaster/autovacuum.c | 52 +++++++++++++++++++++--------
 2 files changed, 44 insertions(+), 15 deletions(-)

diff --git a/src/backend/commands/vacuum.c b/src/backend/commands/vacuum.c
index 33a33bf6b1c..0015b9ef4b0 100644
--- a/src/backend/commands/vacuum.c
+++ b/src/backend/commands/vacuum.c
@@ -421,7 +421,7 @@ ExecVacuum(ParseState *pstate, VacuumStmt *vacstmt, bool isTopLevel)
 	/*
 	 * Later, in vacuum_rel(), we check if a reloption override was specified.
 	 */
-	params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+	params.max_eager_freeze_failure_rate = -1.0;
 
 	/*
 	 * Create special memory context for cross-transaction storage.
@@ -2195,10 +2195,13 @@ vacuum_rel(Oid relid, RangeVar *relation, VacuumParams *params,
 	 * Check if the vacuum_max_eager_freeze_failure_rate table storage
 	 * parameter was specified. This overrides the GUC value.
 	 */
-	if (rel->rd_options != NULL &&
+	if (params->max_eager_freeze_failure_rate < 0 &&
+		rel->rd_options != NULL &&
 		((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate >= 0)
 		params->max_eager_freeze_failure_rate =
 			((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate;
+	else
+		params->max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
 
 	/*
 	 * Set truncate option based on truncate reloption or GUC if it wasn't
diff --git a/src/backend/postmaster/autovacuum.c b/src/backend/postmaster/autovacuum.c
index f86c9fed853..3bedca971ff 100644
--- a/src/backend/postmaster/autovacuum.c
+++ b/src/backend/postmaster/autovacuum.c
@@ -2758,6 +2758,9 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		int			multixact_freeze_table_age;
 		int			log_min_duration;
 		AutoVacOpts *avopts = (relopts ? &relopts->autovacuum : NULL);
+		VacOptValue index_cleanup;
+		VacOptValue truncate;
+		double		max_eager_freeze_failure_rate;
 
 		/*
 		 * Calculate the vacuum cost parameters and the freeze ages.  If there
@@ -2790,6 +2793,39 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			? avopts->multixact_freeze_table_age
 			: default_multixact_freeze_table_age;
 
+		if (relopts)
+		{
+			switch (relopts->vacuum_index_cleanup)
+			{
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_AUTO:
+					index_cleanup = VACOPTVALUE_AUTO;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_ON:
+					index_cleanup = VACOPTVALUE_ENABLED;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_OFF:
+					index_cleanup = VACOPTVALUE_DISABLED;
+					break;
+			}
+		}
+		else
+			index_cleanup = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_truncate_set)
+		{
+			if (relopts->vacuum_truncate)
+				truncate = VACOPTVALUE_ENABLED;
+			else
+				truncate = VACOPTVALUE_DISABLED;
+		}
+		else
+			truncate = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_max_eager_freeze_failure_rate >= 0)
+			max_eager_freeze_failure_rate = relopts->vacuum_max_eager_freeze_failure_rate;
+		else
+			max_eager_freeze_failure_rate = -1.0;
+
 		tab = palloc(sizeof(autovac_table));
 		tab->at_relid = relid;
 		tab->at_sharedrel = classForm->relisshared;
@@ -2806,13 +2842,8 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			(doanalyze ? VACOPT_ANALYZE : 0) |
 			(!wraparound ? VACOPT_SKIP_LOCKED : 0);
 
-		/*
-		 * index_cleanup and truncate are unspecified at first in autovacuum.
-		 * They will be filled in with usable values using their reloptions
-		 * (or reloption defaults) later.
-		 */
-		tab->at_params.index_cleanup = VACOPTVALUE_UNSPECIFIED;
-		tab->at_params.truncate = VACOPTVALUE_UNSPECIFIED;
+		tab->at_params.index_cleanup = index_cleanup;
+		tab->at_params.truncate = truncate;
 		/* As of now, we don't support parallel vacuum for autovacuum */
 		tab->at_params.nworkers = -1;
 		tab->at_params.freeze_min_age = freeze_min_age;
@@ -2822,12 +2853,7 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		tab->at_params.is_wraparound = wraparound;
 		tab->at_params.log_min_duration = log_min_duration;
 		tab->at_params.toast_parent = InvalidOid;
-
-		/*
-		 * Later, in vacuum_rel(), we check reloptions for any
-		 * vacuum_max_eager_freeze_failure_rate override.
-		 */
-		tab->at_params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+		tab->at_params.max_eager_freeze_failure_rate = max_eager_freeze_failure_rate;
 		tab->at_storage_param_vac_cost_limit = avopts ?
 			avopts->vacuum_cost_limit : 0;
 		tab->at_storage_param_vac_cost_delay = avopts ?
-- 
2.39.5 (Apple Git-154)


--QWBYbd5Ar5k8NvSv
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
	filename=v1-0003-autovac-combine-reloptions-correctly.patch



^ permalink  raw  reply  [nested|flat] 804+ messages in thread

* [PATCH v1 2/4] autovac: resolve relopts before vacuuming
@ 2025-06-23 19:42 Nathan Bossart <[email protected]>
  0 siblings, 0 replies; 804+ messages in thread

From: Nathan Bossart @ 2025-06-23 19:42 UTC (permalink / raw)

---
 src/backend/commands/vacuum.c       |  7 ++--
 src/backend/postmaster/autovacuum.c | 52 +++++++++++++++++++++--------
 2 files changed, 44 insertions(+), 15 deletions(-)

diff --git a/src/backend/commands/vacuum.c b/src/backend/commands/vacuum.c
index 33a33bf6b1c..0015b9ef4b0 100644
--- a/src/backend/commands/vacuum.c
+++ b/src/backend/commands/vacuum.c
@@ -421,7 +421,7 @@ ExecVacuum(ParseState *pstate, VacuumStmt *vacstmt, bool isTopLevel)
 	/*
 	 * Later, in vacuum_rel(), we check if a reloption override was specified.
 	 */
-	params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+	params.max_eager_freeze_failure_rate = -1.0;
 
 	/*
 	 * Create special memory context for cross-transaction storage.
@@ -2195,10 +2195,13 @@ vacuum_rel(Oid relid, RangeVar *relation, VacuumParams *params,
 	 * Check if the vacuum_max_eager_freeze_failure_rate table storage
 	 * parameter was specified. This overrides the GUC value.
 	 */
-	if (rel->rd_options != NULL &&
+	if (params->max_eager_freeze_failure_rate < 0 &&
+		rel->rd_options != NULL &&
 		((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate >= 0)
 		params->max_eager_freeze_failure_rate =
 			((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate;
+	else
+		params->max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
 
 	/*
 	 * Set truncate option based on truncate reloption or GUC if it wasn't
diff --git a/src/backend/postmaster/autovacuum.c b/src/backend/postmaster/autovacuum.c
index f86c9fed853..3bedca971ff 100644
--- a/src/backend/postmaster/autovacuum.c
+++ b/src/backend/postmaster/autovacuum.c
@@ -2758,6 +2758,9 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		int			multixact_freeze_table_age;
 		int			log_min_duration;
 		AutoVacOpts *avopts = (relopts ? &relopts->autovacuum : NULL);
+		VacOptValue index_cleanup;
+		VacOptValue truncate;
+		double		max_eager_freeze_failure_rate;
 
 		/*
 		 * Calculate the vacuum cost parameters and the freeze ages.  If there
@@ -2790,6 +2793,39 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			? avopts->multixact_freeze_table_age
 			: default_multixact_freeze_table_age;
 
+		if (relopts)
+		{
+			switch (relopts->vacuum_index_cleanup)
+			{
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_AUTO:
+					index_cleanup = VACOPTVALUE_AUTO;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_ON:
+					index_cleanup = VACOPTVALUE_ENABLED;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_OFF:
+					index_cleanup = VACOPTVALUE_DISABLED;
+					break;
+			}
+		}
+		else
+			index_cleanup = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_truncate_set)
+		{
+			if (relopts->vacuum_truncate)
+				truncate = VACOPTVALUE_ENABLED;
+			else
+				truncate = VACOPTVALUE_DISABLED;
+		}
+		else
+			truncate = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_max_eager_freeze_failure_rate >= 0)
+			max_eager_freeze_failure_rate = relopts->vacuum_max_eager_freeze_failure_rate;
+		else
+			max_eager_freeze_failure_rate = -1.0;
+
 		tab = palloc(sizeof(autovac_table));
 		tab->at_relid = relid;
 		tab->at_sharedrel = classForm->relisshared;
@@ -2806,13 +2842,8 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			(doanalyze ? VACOPT_ANALYZE : 0) |
 			(!wraparound ? VACOPT_SKIP_LOCKED : 0);
 
-		/*
-		 * index_cleanup and truncate are unspecified at first in autovacuum.
-		 * They will be filled in with usable values using their reloptions
-		 * (or reloption defaults) later.
-		 */
-		tab->at_params.index_cleanup = VACOPTVALUE_UNSPECIFIED;
-		tab->at_params.truncate = VACOPTVALUE_UNSPECIFIED;
+		tab->at_params.index_cleanup = index_cleanup;
+		tab->at_params.truncate = truncate;
 		/* As of now, we don't support parallel vacuum for autovacuum */
 		tab->at_params.nworkers = -1;
 		tab->at_params.freeze_min_age = freeze_min_age;
@@ -2822,12 +2853,7 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		tab->at_params.is_wraparound = wraparound;
 		tab->at_params.log_min_duration = log_min_duration;
 		tab->at_params.toast_parent = InvalidOid;
-
-		/*
-		 * Later, in vacuum_rel(), we check reloptions for any
-		 * vacuum_max_eager_freeze_failure_rate override.
-		 */
-		tab->at_params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+		tab->at_params.max_eager_freeze_failure_rate = max_eager_freeze_failure_rate;
 		tab->at_storage_param_vac_cost_limit = avopts ?
 			avopts->vacuum_cost_limit : 0;
 		tab->at_storage_param_vac_cost_delay = avopts ?
-- 
2.39.5 (Apple Git-154)


--QWBYbd5Ar5k8NvSv
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
	filename=v1-0003-autovac-combine-reloptions-correctly.patch



^ permalink  raw  reply  [nested|flat] 804+ messages in thread

* [PATCH v1 2/4] autovac: resolve relopts before vacuuming
@ 2025-06-23 19:42 Nathan Bossart <[email protected]>
  0 siblings, 0 replies; 804+ messages in thread

From: Nathan Bossart @ 2025-06-23 19:42 UTC (permalink / raw)

---
 src/backend/commands/vacuum.c       |  7 ++--
 src/backend/postmaster/autovacuum.c | 52 +++++++++++++++++++++--------
 2 files changed, 44 insertions(+), 15 deletions(-)

diff --git a/src/backend/commands/vacuum.c b/src/backend/commands/vacuum.c
index 33a33bf6b1c..0015b9ef4b0 100644
--- a/src/backend/commands/vacuum.c
+++ b/src/backend/commands/vacuum.c
@@ -421,7 +421,7 @@ ExecVacuum(ParseState *pstate, VacuumStmt *vacstmt, bool isTopLevel)
 	/*
 	 * Later, in vacuum_rel(), we check if a reloption override was specified.
 	 */
-	params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+	params.max_eager_freeze_failure_rate = -1.0;
 
 	/*
 	 * Create special memory context for cross-transaction storage.
@@ -2195,10 +2195,13 @@ vacuum_rel(Oid relid, RangeVar *relation, VacuumParams *params,
 	 * Check if the vacuum_max_eager_freeze_failure_rate table storage
 	 * parameter was specified. This overrides the GUC value.
 	 */
-	if (rel->rd_options != NULL &&
+	if (params->max_eager_freeze_failure_rate < 0 &&
+		rel->rd_options != NULL &&
 		((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate >= 0)
 		params->max_eager_freeze_failure_rate =
 			((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate;
+	else
+		params->max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
 
 	/*
 	 * Set truncate option based on truncate reloption or GUC if it wasn't
diff --git a/src/backend/postmaster/autovacuum.c b/src/backend/postmaster/autovacuum.c
index f86c9fed853..3bedca971ff 100644
--- a/src/backend/postmaster/autovacuum.c
+++ b/src/backend/postmaster/autovacuum.c
@@ -2758,6 +2758,9 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		int			multixact_freeze_table_age;
 		int			log_min_duration;
 		AutoVacOpts *avopts = (relopts ? &relopts->autovacuum : NULL);
+		VacOptValue index_cleanup;
+		VacOptValue truncate;
+		double		max_eager_freeze_failure_rate;
 
 		/*
 		 * Calculate the vacuum cost parameters and the freeze ages.  If there
@@ -2790,6 +2793,39 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			? avopts->multixact_freeze_table_age
 			: default_multixact_freeze_table_age;
 
+		if (relopts)
+		{
+			switch (relopts->vacuum_index_cleanup)
+			{
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_AUTO:
+					index_cleanup = VACOPTVALUE_AUTO;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_ON:
+					index_cleanup = VACOPTVALUE_ENABLED;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_OFF:
+					index_cleanup = VACOPTVALUE_DISABLED;
+					break;
+			}
+		}
+		else
+			index_cleanup = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_truncate_set)
+		{
+			if (relopts->vacuum_truncate)
+				truncate = VACOPTVALUE_ENABLED;
+			else
+				truncate = VACOPTVALUE_DISABLED;
+		}
+		else
+			truncate = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_max_eager_freeze_failure_rate >= 0)
+			max_eager_freeze_failure_rate = relopts->vacuum_max_eager_freeze_failure_rate;
+		else
+			max_eager_freeze_failure_rate = -1.0;
+
 		tab = palloc(sizeof(autovac_table));
 		tab->at_relid = relid;
 		tab->at_sharedrel = classForm->relisshared;
@@ -2806,13 +2842,8 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			(doanalyze ? VACOPT_ANALYZE : 0) |
 			(!wraparound ? VACOPT_SKIP_LOCKED : 0);
 
-		/*
-		 * index_cleanup and truncate are unspecified at first in autovacuum.
-		 * They will be filled in with usable values using their reloptions
-		 * (or reloption defaults) later.
-		 */
-		tab->at_params.index_cleanup = VACOPTVALUE_UNSPECIFIED;
-		tab->at_params.truncate = VACOPTVALUE_UNSPECIFIED;
+		tab->at_params.index_cleanup = index_cleanup;
+		tab->at_params.truncate = truncate;
 		/* As of now, we don't support parallel vacuum for autovacuum */
 		tab->at_params.nworkers = -1;
 		tab->at_params.freeze_min_age = freeze_min_age;
@@ -2822,12 +2853,7 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		tab->at_params.is_wraparound = wraparound;
 		tab->at_params.log_min_duration = log_min_duration;
 		tab->at_params.toast_parent = InvalidOid;
-
-		/*
-		 * Later, in vacuum_rel(), we check reloptions for any
-		 * vacuum_max_eager_freeze_failure_rate override.
-		 */
-		tab->at_params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+		tab->at_params.max_eager_freeze_failure_rate = max_eager_freeze_failure_rate;
 		tab->at_storage_param_vac_cost_limit = avopts ?
 			avopts->vacuum_cost_limit : 0;
 		tab->at_storage_param_vac_cost_delay = avopts ?
-- 
2.39.5 (Apple Git-154)


--QWBYbd5Ar5k8NvSv
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
	filename=v1-0003-autovac-combine-reloptions-correctly.patch



^ permalink  raw  reply  [nested|flat] 804+ messages in thread

* [PATCH v1 2/4] autovac: resolve relopts before vacuuming
@ 2025-06-23 19:42 Nathan Bossart <[email protected]>
  0 siblings, 0 replies; 804+ messages in thread

From: Nathan Bossart @ 2025-06-23 19:42 UTC (permalink / raw)

---
 src/backend/commands/vacuum.c       |  7 ++--
 src/backend/postmaster/autovacuum.c | 52 +++++++++++++++++++++--------
 2 files changed, 44 insertions(+), 15 deletions(-)

diff --git a/src/backend/commands/vacuum.c b/src/backend/commands/vacuum.c
index 33a33bf6b1c..0015b9ef4b0 100644
--- a/src/backend/commands/vacuum.c
+++ b/src/backend/commands/vacuum.c
@@ -421,7 +421,7 @@ ExecVacuum(ParseState *pstate, VacuumStmt *vacstmt, bool isTopLevel)
 	/*
 	 * Later, in vacuum_rel(), we check if a reloption override was specified.
 	 */
-	params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+	params.max_eager_freeze_failure_rate = -1.0;
 
 	/*
 	 * Create special memory context for cross-transaction storage.
@@ -2195,10 +2195,13 @@ vacuum_rel(Oid relid, RangeVar *relation, VacuumParams *params,
 	 * Check if the vacuum_max_eager_freeze_failure_rate table storage
 	 * parameter was specified. This overrides the GUC value.
 	 */
-	if (rel->rd_options != NULL &&
+	if (params->max_eager_freeze_failure_rate < 0 &&
+		rel->rd_options != NULL &&
 		((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate >= 0)
 		params->max_eager_freeze_failure_rate =
 			((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate;
+	else
+		params->max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
 
 	/*
 	 * Set truncate option based on truncate reloption or GUC if it wasn't
diff --git a/src/backend/postmaster/autovacuum.c b/src/backend/postmaster/autovacuum.c
index f86c9fed853..3bedca971ff 100644
--- a/src/backend/postmaster/autovacuum.c
+++ b/src/backend/postmaster/autovacuum.c
@@ -2758,6 +2758,9 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		int			multixact_freeze_table_age;
 		int			log_min_duration;
 		AutoVacOpts *avopts = (relopts ? &relopts->autovacuum : NULL);
+		VacOptValue index_cleanup;
+		VacOptValue truncate;
+		double		max_eager_freeze_failure_rate;
 
 		/*
 		 * Calculate the vacuum cost parameters and the freeze ages.  If there
@@ -2790,6 +2793,39 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			? avopts->multixact_freeze_table_age
 			: default_multixact_freeze_table_age;
 
+		if (relopts)
+		{
+			switch (relopts->vacuum_index_cleanup)
+			{
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_AUTO:
+					index_cleanup = VACOPTVALUE_AUTO;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_ON:
+					index_cleanup = VACOPTVALUE_ENABLED;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_OFF:
+					index_cleanup = VACOPTVALUE_DISABLED;
+					break;
+			}
+		}
+		else
+			index_cleanup = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_truncate_set)
+		{
+			if (relopts->vacuum_truncate)
+				truncate = VACOPTVALUE_ENABLED;
+			else
+				truncate = VACOPTVALUE_DISABLED;
+		}
+		else
+			truncate = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_max_eager_freeze_failure_rate >= 0)
+			max_eager_freeze_failure_rate = relopts->vacuum_max_eager_freeze_failure_rate;
+		else
+			max_eager_freeze_failure_rate = -1.0;
+
 		tab = palloc(sizeof(autovac_table));
 		tab->at_relid = relid;
 		tab->at_sharedrel = classForm->relisshared;
@@ -2806,13 +2842,8 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			(doanalyze ? VACOPT_ANALYZE : 0) |
 			(!wraparound ? VACOPT_SKIP_LOCKED : 0);
 
-		/*
-		 * index_cleanup and truncate are unspecified at first in autovacuum.
-		 * They will be filled in with usable values using their reloptions
-		 * (or reloption defaults) later.
-		 */
-		tab->at_params.index_cleanup = VACOPTVALUE_UNSPECIFIED;
-		tab->at_params.truncate = VACOPTVALUE_UNSPECIFIED;
+		tab->at_params.index_cleanup = index_cleanup;
+		tab->at_params.truncate = truncate;
 		/* As of now, we don't support parallel vacuum for autovacuum */
 		tab->at_params.nworkers = -1;
 		tab->at_params.freeze_min_age = freeze_min_age;
@@ -2822,12 +2853,7 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		tab->at_params.is_wraparound = wraparound;
 		tab->at_params.log_min_duration = log_min_duration;
 		tab->at_params.toast_parent = InvalidOid;
-
-		/*
-		 * Later, in vacuum_rel(), we check reloptions for any
-		 * vacuum_max_eager_freeze_failure_rate override.
-		 */
-		tab->at_params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+		tab->at_params.max_eager_freeze_failure_rate = max_eager_freeze_failure_rate;
 		tab->at_storage_param_vac_cost_limit = avopts ?
 			avopts->vacuum_cost_limit : 0;
 		tab->at_storage_param_vac_cost_delay = avopts ?
-- 
2.39.5 (Apple Git-154)


--QWBYbd5Ar5k8NvSv
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
	filename=v1-0003-autovac-combine-reloptions-correctly.patch



^ permalink  raw  reply  [nested|flat] 804+ messages in thread

* [PATCH v1 2/4] autovac: resolve relopts before vacuuming
@ 2025-06-23 19:42 Nathan Bossart <[email protected]>
  0 siblings, 0 replies; 804+ messages in thread

From: Nathan Bossart @ 2025-06-23 19:42 UTC (permalink / raw)

---
 src/backend/commands/vacuum.c       |  7 ++--
 src/backend/postmaster/autovacuum.c | 52 +++++++++++++++++++++--------
 2 files changed, 44 insertions(+), 15 deletions(-)

diff --git a/src/backend/commands/vacuum.c b/src/backend/commands/vacuum.c
index 33a33bf6b1c..0015b9ef4b0 100644
--- a/src/backend/commands/vacuum.c
+++ b/src/backend/commands/vacuum.c
@@ -421,7 +421,7 @@ ExecVacuum(ParseState *pstate, VacuumStmt *vacstmt, bool isTopLevel)
 	/*
 	 * Later, in vacuum_rel(), we check if a reloption override was specified.
 	 */
-	params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+	params.max_eager_freeze_failure_rate = -1.0;
 
 	/*
 	 * Create special memory context for cross-transaction storage.
@@ -2195,10 +2195,13 @@ vacuum_rel(Oid relid, RangeVar *relation, VacuumParams *params,
 	 * Check if the vacuum_max_eager_freeze_failure_rate table storage
 	 * parameter was specified. This overrides the GUC value.
 	 */
-	if (rel->rd_options != NULL &&
+	if (params->max_eager_freeze_failure_rate < 0 &&
+		rel->rd_options != NULL &&
 		((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate >= 0)
 		params->max_eager_freeze_failure_rate =
 			((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate;
+	else
+		params->max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
 
 	/*
 	 * Set truncate option based on truncate reloption or GUC if it wasn't
diff --git a/src/backend/postmaster/autovacuum.c b/src/backend/postmaster/autovacuum.c
index f86c9fed853..3bedca971ff 100644
--- a/src/backend/postmaster/autovacuum.c
+++ b/src/backend/postmaster/autovacuum.c
@@ -2758,6 +2758,9 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		int			multixact_freeze_table_age;
 		int			log_min_duration;
 		AutoVacOpts *avopts = (relopts ? &relopts->autovacuum : NULL);
+		VacOptValue index_cleanup;
+		VacOptValue truncate;
+		double		max_eager_freeze_failure_rate;
 
 		/*
 		 * Calculate the vacuum cost parameters and the freeze ages.  If there
@@ -2790,6 +2793,39 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			? avopts->multixact_freeze_table_age
 			: default_multixact_freeze_table_age;
 
+		if (relopts)
+		{
+			switch (relopts->vacuum_index_cleanup)
+			{
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_AUTO:
+					index_cleanup = VACOPTVALUE_AUTO;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_ON:
+					index_cleanup = VACOPTVALUE_ENABLED;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_OFF:
+					index_cleanup = VACOPTVALUE_DISABLED;
+					break;
+			}
+		}
+		else
+			index_cleanup = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_truncate_set)
+		{
+			if (relopts->vacuum_truncate)
+				truncate = VACOPTVALUE_ENABLED;
+			else
+				truncate = VACOPTVALUE_DISABLED;
+		}
+		else
+			truncate = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_max_eager_freeze_failure_rate >= 0)
+			max_eager_freeze_failure_rate = relopts->vacuum_max_eager_freeze_failure_rate;
+		else
+			max_eager_freeze_failure_rate = -1.0;
+
 		tab = palloc(sizeof(autovac_table));
 		tab->at_relid = relid;
 		tab->at_sharedrel = classForm->relisshared;
@@ -2806,13 +2842,8 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			(doanalyze ? VACOPT_ANALYZE : 0) |
 			(!wraparound ? VACOPT_SKIP_LOCKED : 0);
 
-		/*
-		 * index_cleanup and truncate are unspecified at first in autovacuum.
-		 * They will be filled in with usable values using their reloptions
-		 * (or reloption defaults) later.
-		 */
-		tab->at_params.index_cleanup = VACOPTVALUE_UNSPECIFIED;
-		tab->at_params.truncate = VACOPTVALUE_UNSPECIFIED;
+		tab->at_params.index_cleanup = index_cleanup;
+		tab->at_params.truncate = truncate;
 		/* As of now, we don't support parallel vacuum for autovacuum */
 		tab->at_params.nworkers = -1;
 		tab->at_params.freeze_min_age = freeze_min_age;
@@ -2822,12 +2853,7 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		tab->at_params.is_wraparound = wraparound;
 		tab->at_params.log_min_duration = log_min_duration;
 		tab->at_params.toast_parent = InvalidOid;
-
-		/*
-		 * Later, in vacuum_rel(), we check reloptions for any
-		 * vacuum_max_eager_freeze_failure_rate override.
-		 */
-		tab->at_params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+		tab->at_params.max_eager_freeze_failure_rate = max_eager_freeze_failure_rate;
 		tab->at_storage_param_vac_cost_limit = avopts ?
 			avopts->vacuum_cost_limit : 0;
 		tab->at_storage_param_vac_cost_delay = avopts ?
-- 
2.39.5 (Apple Git-154)


--QWBYbd5Ar5k8NvSv
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
	filename=v1-0003-autovac-combine-reloptions-correctly.patch



^ permalink  raw  reply  [nested|flat] 804+ messages in thread

* [PATCH v1 2/4] autovac: resolve relopts before vacuuming
@ 2025-06-23 19:42 Nathan Bossart <[email protected]>
  0 siblings, 0 replies; 804+ messages in thread

From: Nathan Bossart @ 2025-06-23 19:42 UTC (permalink / raw)

---
 src/backend/commands/vacuum.c       |  7 ++--
 src/backend/postmaster/autovacuum.c | 52 +++++++++++++++++++++--------
 2 files changed, 44 insertions(+), 15 deletions(-)

diff --git a/src/backend/commands/vacuum.c b/src/backend/commands/vacuum.c
index 33a33bf6b1c..0015b9ef4b0 100644
--- a/src/backend/commands/vacuum.c
+++ b/src/backend/commands/vacuum.c
@@ -421,7 +421,7 @@ ExecVacuum(ParseState *pstate, VacuumStmt *vacstmt, bool isTopLevel)
 	/*
 	 * Later, in vacuum_rel(), we check if a reloption override was specified.
 	 */
-	params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+	params.max_eager_freeze_failure_rate = -1.0;
 
 	/*
 	 * Create special memory context for cross-transaction storage.
@@ -2195,10 +2195,13 @@ vacuum_rel(Oid relid, RangeVar *relation, VacuumParams *params,
 	 * Check if the vacuum_max_eager_freeze_failure_rate table storage
 	 * parameter was specified. This overrides the GUC value.
 	 */
-	if (rel->rd_options != NULL &&
+	if (params->max_eager_freeze_failure_rate < 0 &&
+		rel->rd_options != NULL &&
 		((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate >= 0)
 		params->max_eager_freeze_failure_rate =
 			((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate;
+	else
+		params->max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
 
 	/*
 	 * Set truncate option based on truncate reloption or GUC if it wasn't
diff --git a/src/backend/postmaster/autovacuum.c b/src/backend/postmaster/autovacuum.c
index f86c9fed853..3bedca971ff 100644
--- a/src/backend/postmaster/autovacuum.c
+++ b/src/backend/postmaster/autovacuum.c
@@ -2758,6 +2758,9 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		int			multixact_freeze_table_age;
 		int			log_min_duration;
 		AutoVacOpts *avopts = (relopts ? &relopts->autovacuum : NULL);
+		VacOptValue index_cleanup;
+		VacOptValue truncate;
+		double		max_eager_freeze_failure_rate;
 
 		/*
 		 * Calculate the vacuum cost parameters and the freeze ages.  If there
@@ -2790,6 +2793,39 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			? avopts->multixact_freeze_table_age
 			: default_multixact_freeze_table_age;
 
+		if (relopts)
+		{
+			switch (relopts->vacuum_index_cleanup)
+			{
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_AUTO:
+					index_cleanup = VACOPTVALUE_AUTO;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_ON:
+					index_cleanup = VACOPTVALUE_ENABLED;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_OFF:
+					index_cleanup = VACOPTVALUE_DISABLED;
+					break;
+			}
+		}
+		else
+			index_cleanup = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_truncate_set)
+		{
+			if (relopts->vacuum_truncate)
+				truncate = VACOPTVALUE_ENABLED;
+			else
+				truncate = VACOPTVALUE_DISABLED;
+		}
+		else
+			truncate = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_max_eager_freeze_failure_rate >= 0)
+			max_eager_freeze_failure_rate = relopts->vacuum_max_eager_freeze_failure_rate;
+		else
+			max_eager_freeze_failure_rate = -1.0;
+
 		tab = palloc(sizeof(autovac_table));
 		tab->at_relid = relid;
 		tab->at_sharedrel = classForm->relisshared;
@@ -2806,13 +2842,8 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			(doanalyze ? VACOPT_ANALYZE : 0) |
 			(!wraparound ? VACOPT_SKIP_LOCKED : 0);
 
-		/*
-		 * index_cleanup and truncate are unspecified at first in autovacuum.
-		 * They will be filled in with usable values using their reloptions
-		 * (or reloption defaults) later.
-		 */
-		tab->at_params.index_cleanup = VACOPTVALUE_UNSPECIFIED;
-		tab->at_params.truncate = VACOPTVALUE_UNSPECIFIED;
+		tab->at_params.index_cleanup = index_cleanup;
+		tab->at_params.truncate = truncate;
 		/* As of now, we don't support parallel vacuum for autovacuum */
 		tab->at_params.nworkers = -1;
 		tab->at_params.freeze_min_age = freeze_min_age;
@@ -2822,12 +2853,7 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		tab->at_params.is_wraparound = wraparound;
 		tab->at_params.log_min_duration = log_min_duration;
 		tab->at_params.toast_parent = InvalidOid;
-
-		/*
-		 * Later, in vacuum_rel(), we check reloptions for any
-		 * vacuum_max_eager_freeze_failure_rate override.
-		 */
-		tab->at_params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+		tab->at_params.max_eager_freeze_failure_rate = max_eager_freeze_failure_rate;
 		tab->at_storage_param_vac_cost_limit = avopts ?
 			avopts->vacuum_cost_limit : 0;
 		tab->at_storage_param_vac_cost_delay = avopts ?
-- 
2.39.5 (Apple Git-154)


--QWBYbd5Ar5k8NvSv
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
	filename=v1-0003-autovac-combine-reloptions-correctly.patch



^ permalink  raw  reply  [nested|flat] 804+ messages in thread

* [PATCH v1 2/4] autovac: resolve relopts before vacuuming
@ 2025-06-23 19:42 Nathan Bossart <[email protected]>
  0 siblings, 0 replies; 804+ messages in thread

From: Nathan Bossart @ 2025-06-23 19:42 UTC (permalink / raw)

---
 src/backend/commands/vacuum.c       |  7 ++--
 src/backend/postmaster/autovacuum.c | 52 +++++++++++++++++++++--------
 2 files changed, 44 insertions(+), 15 deletions(-)

diff --git a/src/backend/commands/vacuum.c b/src/backend/commands/vacuum.c
index 33a33bf6b1c..0015b9ef4b0 100644
--- a/src/backend/commands/vacuum.c
+++ b/src/backend/commands/vacuum.c
@@ -421,7 +421,7 @@ ExecVacuum(ParseState *pstate, VacuumStmt *vacstmt, bool isTopLevel)
 	/*
 	 * Later, in vacuum_rel(), we check if a reloption override was specified.
 	 */
-	params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+	params.max_eager_freeze_failure_rate = -1.0;
 
 	/*
 	 * Create special memory context for cross-transaction storage.
@@ -2195,10 +2195,13 @@ vacuum_rel(Oid relid, RangeVar *relation, VacuumParams *params,
 	 * Check if the vacuum_max_eager_freeze_failure_rate table storage
 	 * parameter was specified. This overrides the GUC value.
 	 */
-	if (rel->rd_options != NULL &&
+	if (params->max_eager_freeze_failure_rate < 0 &&
+		rel->rd_options != NULL &&
 		((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate >= 0)
 		params->max_eager_freeze_failure_rate =
 			((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate;
+	else
+		params->max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
 
 	/*
 	 * Set truncate option based on truncate reloption or GUC if it wasn't
diff --git a/src/backend/postmaster/autovacuum.c b/src/backend/postmaster/autovacuum.c
index f86c9fed853..3bedca971ff 100644
--- a/src/backend/postmaster/autovacuum.c
+++ b/src/backend/postmaster/autovacuum.c
@@ -2758,6 +2758,9 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		int			multixact_freeze_table_age;
 		int			log_min_duration;
 		AutoVacOpts *avopts = (relopts ? &relopts->autovacuum : NULL);
+		VacOptValue index_cleanup;
+		VacOptValue truncate;
+		double		max_eager_freeze_failure_rate;
 
 		/*
 		 * Calculate the vacuum cost parameters and the freeze ages.  If there
@@ -2790,6 +2793,39 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			? avopts->multixact_freeze_table_age
 			: default_multixact_freeze_table_age;
 
+		if (relopts)
+		{
+			switch (relopts->vacuum_index_cleanup)
+			{
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_AUTO:
+					index_cleanup = VACOPTVALUE_AUTO;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_ON:
+					index_cleanup = VACOPTVALUE_ENABLED;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_OFF:
+					index_cleanup = VACOPTVALUE_DISABLED;
+					break;
+			}
+		}
+		else
+			index_cleanup = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_truncate_set)
+		{
+			if (relopts->vacuum_truncate)
+				truncate = VACOPTVALUE_ENABLED;
+			else
+				truncate = VACOPTVALUE_DISABLED;
+		}
+		else
+			truncate = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_max_eager_freeze_failure_rate >= 0)
+			max_eager_freeze_failure_rate = relopts->vacuum_max_eager_freeze_failure_rate;
+		else
+			max_eager_freeze_failure_rate = -1.0;
+
 		tab = palloc(sizeof(autovac_table));
 		tab->at_relid = relid;
 		tab->at_sharedrel = classForm->relisshared;
@@ -2806,13 +2842,8 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			(doanalyze ? VACOPT_ANALYZE : 0) |
 			(!wraparound ? VACOPT_SKIP_LOCKED : 0);
 
-		/*
-		 * index_cleanup and truncate are unspecified at first in autovacuum.
-		 * They will be filled in with usable values using their reloptions
-		 * (or reloption defaults) later.
-		 */
-		tab->at_params.index_cleanup = VACOPTVALUE_UNSPECIFIED;
-		tab->at_params.truncate = VACOPTVALUE_UNSPECIFIED;
+		tab->at_params.index_cleanup = index_cleanup;
+		tab->at_params.truncate = truncate;
 		/* As of now, we don't support parallel vacuum for autovacuum */
 		tab->at_params.nworkers = -1;
 		tab->at_params.freeze_min_age = freeze_min_age;
@@ -2822,12 +2853,7 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		tab->at_params.is_wraparound = wraparound;
 		tab->at_params.log_min_duration = log_min_duration;
 		tab->at_params.toast_parent = InvalidOid;
-
-		/*
-		 * Later, in vacuum_rel(), we check reloptions for any
-		 * vacuum_max_eager_freeze_failure_rate override.
-		 */
-		tab->at_params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+		tab->at_params.max_eager_freeze_failure_rate = max_eager_freeze_failure_rate;
 		tab->at_storage_param_vac_cost_limit = avopts ?
 			avopts->vacuum_cost_limit : 0;
 		tab->at_storage_param_vac_cost_delay = avopts ?
-- 
2.39.5 (Apple Git-154)


--QWBYbd5Ar5k8NvSv
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
	filename=v1-0003-autovac-combine-reloptions-correctly.patch



^ permalink  raw  reply  [nested|flat] 804+ messages in thread

* [PATCH v1 2/4] autovac: resolve relopts before vacuuming
@ 2025-06-23 19:42 Nathan Bossart <[email protected]>
  0 siblings, 0 replies; 804+ messages in thread

From: Nathan Bossart @ 2025-06-23 19:42 UTC (permalink / raw)

---
 src/backend/commands/vacuum.c       |  7 ++--
 src/backend/postmaster/autovacuum.c | 52 +++++++++++++++++++++--------
 2 files changed, 44 insertions(+), 15 deletions(-)

diff --git a/src/backend/commands/vacuum.c b/src/backend/commands/vacuum.c
index 33a33bf6b1c..0015b9ef4b0 100644
--- a/src/backend/commands/vacuum.c
+++ b/src/backend/commands/vacuum.c
@@ -421,7 +421,7 @@ ExecVacuum(ParseState *pstate, VacuumStmt *vacstmt, bool isTopLevel)
 	/*
 	 * Later, in vacuum_rel(), we check if a reloption override was specified.
 	 */
-	params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+	params.max_eager_freeze_failure_rate = -1.0;
 
 	/*
 	 * Create special memory context for cross-transaction storage.
@@ -2195,10 +2195,13 @@ vacuum_rel(Oid relid, RangeVar *relation, VacuumParams *params,
 	 * Check if the vacuum_max_eager_freeze_failure_rate table storage
 	 * parameter was specified. This overrides the GUC value.
 	 */
-	if (rel->rd_options != NULL &&
+	if (params->max_eager_freeze_failure_rate < 0 &&
+		rel->rd_options != NULL &&
 		((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate >= 0)
 		params->max_eager_freeze_failure_rate =
 			((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate;
+	else
+		params->max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
 
 	/*
 	 * Set truncate option based on truncate reloption or GUC if it wasn't
diff --git a/src/backend/postmaster/autovacuum.c b/src/backend/postmaster/autovacuum.c
index f86c9fed853..3bedca971ff 100644
--- a/src/backend/postmaster/autovacuum.c
+++ b/src/backend/postmaster/autovacuum.c
@@ -2758,6 +2758,9 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		int			multixact_freeze_table_age;
 		int			log_min_duration;
 		AutoVacOpts *avopts = (relopts ? &relopts->autovacuum : NULL);
+		VacOptValue index_cleanup;
+		VacOptValue truncate;
+		double		max_eager_freeze_failure_rate;
 
 		/*
 		 * Calculate the vacuum cost parameters and the freeze ages.  If there
@@ -2790,6 +2793,39 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			? avopts->multixact_freeze_table_age
 			: default_multixact_freeze_table_age;
 
+		if (relopts)
+		{
+			switch (relopts->vacuum_index_cleanup)
+			{
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_AUTO:
+					index_cleanup = VACOPTVALUE_AUTO;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_ON:
+					index_cleanup = VACOPTVALUE_ENABLED;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_OFF:
+					index_cleanup = VACOPTVALUE_DISABLED;
+					break;
+			}
+		}
+		else
+			index_cleanup = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_truncate_set)
+		{
+			if (relopts->vacuum_truncate)
+				truncate = VACOPTVALUE_ENABLED;
+			else
+				truncate = VACOPTVALUE_DISABLED;
+		}
+		else
+			truncate = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_max_eager_freeze_failure_rate >= 0)
+			max_eager_freeze_failure_rate = relopts->vacuum_max_eager_freeze_failure_rate;
+		else
+			max_eager_freeze_failure_rate = -1.0;
+
 		tab = palloc(sizeof(autovac_table));
 		tab->at_relid = relid;
 		tab->at_sharedrel = classForm->relisshared;
@@ -2806,13 +2842,8 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			(doanalyze ? VACOPT_ANALYZE : 0) |
 			(!wraparound ? VACOPT_SKIP_LOCKED : 0);
 
-		/*
-		 * index_cleanup and truncate are unspecified at first in autovacuum.
-		 * They will be filled in with usable values using their reloptions
-		 * (or reloption defaults) later.
-		 */
-		tab->at_params.index_cleanup = VACOPTVALUE_UNSPECIFIED;
-		tab->at_params.truncate = VACOPTVALUE_UNSPECIFIED;
+		tab->at_params.index_cleanup = index_cleanup;
+		tab->at_params.truncate = truncate;
 		/* As of now, we don't support parallel vacuum for autovacuum */
 		tab->at_params.nworkers = -1;
 		tab->at_params.freeze_min_age = freeze_min_age;
@@ -2822,12 +2853,7 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		tab->at_params.is_wraparound = wraparound;
 		tab->at_params.log_min_duration = log_min_duration;
 		tab->at_params.toast_parent = InvalidOid;
-
-		/*
-		 * Later, in vacuum_rel(), we check reloptions for any
-		 * vacuum_max_eager_freeze_failure_rate override.
-		 */
-		tab->at_params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+		tab->at_params.max_eager_freeze_failure_rate = max_eager_freeze_failure_rate;
 		tab->at_storage_param_vac_cost_limit = avopts ?
 			avopts->vacuum_cost_limit : 0;
 		tab->at_storage_param_vac_cost_delay = avopts ?
-- 
2.39.5 (Apple Git-154)


--QWBYbd5Ar5k8NvSv
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
	filename=v1-0003-autovac-combine-reloptions-correctly.patch



^ permalink  raw  reply  [nested|flat] 804+ messages in thread

* [PATCH v1 2/4] autovac: resolve relopts before vacuuming
@ 2025-06-23 19:42 Nathan Bossart <[email protected]>
  0 siblings, 0 replies; 804+ messages in thread

From: Nathan Bossart @ 2025-06-23 19:42 UTC (permalink / raw)

---
 src/backend/commands/vacuum.c       |  7 ++--
 src/backend/postmaster/autovacuum.c | 52 +++++++++++++++++++++--------
 2 files changed, 44 insertions(+), 15 deletions(-)

diff --git a/src/backend/commands/vacuum.c b/src/backend/commands/vacuum.c
index 33a33bf6b1c..0015b9ef4b0 100644
--- a/src/backend/commands/vacuum.c
+++ b/src/backend/commands/vacuum.c
@@ -421,7 +421,7 @@ ExecVacuum(ParseState *pstate, VacuumStmt *vacstmt, bool isTopLevel)
 	/*
 	 * Later, in vacuum_rel(), we check if a reloption override was specified.
 	 */
-	params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+	params.max_eager_freeze_failure_rate = -1.0;
 
 	/*
 	 * Create special memory context for cross-transaction storage.
@@ -2195,10 +2195,13 @@ vacuum_rel(Oid relid, RangeVar *relation, VacuumParams *params,
 	 * Check if the vacuum_max_eager_freeze_failure_rate table storage
 	 * parameter was specified. This overrides the GUC value.
 	 */
-	if (rel->rd_options != NULL &&
+	if (params->max_eager_freeze_failure_rate < 0 &&
+		rel->rd_options != NULL &&
 		((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate >= 0)
 		params->max_eager_freeze_failure_rate =
 			((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate;
+	else
+		params->max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
 
 	/*
 	 * Set truncate option based on truncate reloption or GUC if it wasn't
diff --git a/src/backend/postmaster/autovacuum.c b/src/backend/postmaster/autovacuum.c
index f86c9fed853..3bedca971ff 100644
--- a/src/backend/postmaster/autovacuum.c
+++ b/src/backend/postmaster/autovacuum.c
@@ -2758,6 +2758,9 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		int			multixact_freeze_table_age;
 		int			log_min_duration;
 		AutoVacOpts *avopts = (relopts ? &relopts->autovacuum : NULL);
+		VacOptValue index_cleanup;
+		VacOptValue truncate;
+		double		max_eager_freeze_failure_rate;
 
 		/*
 		 * Calculate the vacuum cost parameters and the freeze ages.  If there
@@ -2790,6 +2793,39 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			? avopts->multixact_freeze_table_age
 			: default_multixact_freeze_table_age;
 
+		if (relopts)
+		{
+			switch (relopts->vacuum_index_cleanup)
+			{
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_AUTO:
+					index_cleanup = VACOPTVALUE_AUTO;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_ON:
+					index_cleanup = VACOPTVALUE_ENABLED;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_OFF:
+					index_cleanup = VACOPTVALUE_DISABLED;
+					break;
+			}
+		}
+		else
+			index_cleanup = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_truncate_set)
+		{
+			if (relopts->vacuum_truncate)
+				truncate = VACOPTVALUE_ENABLED;
+			else
+				truncate = VACOPTVALUE_DISABLED;
+		}
+		else
+			truncate = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_max_eager_freeze_failure_rate >= 0)
+			max_eager_freeze_failure_rate = relopts->vacuum_max_eager_freeze_failure_rate;
+		else
+			max_eager_freeze_failure_rate = -1.0;
+
 		tab = palloc(sizeof(autovac_table));
 		tab->at_relid = relid;
 		tab->at_sharedrel = classForm->relisshared;
@@ -2806,13 +2842,8 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			(doanalyze ? VACOPT_ANALYZE : 0) |
 			(!wraparound ? VACOPT_SKIP_LOCKED : 0);
 
-		/*
-		 * index_cleanup and truncate are unspecified at first in autovacuum.
-		 * They will be filled in with usable values using their reloptions
-		 * (or reloption defaults) later.
-		 */
-		tab->at_params.index_cleanup = VACOPTVALUE_UNSPECIFIED;
-		tab->at_params.truncate = VACOPTVALUE_UNSPECIFIED;
+		tab->at_params.index_cleanup = index_cleanup;
+		tab->at_params.truncate = truncate;
 		/* As of now, we don't support parallel vacuum for autovacuum */
 		tab->at_params.nworkers = -1;
 		tab->at_params.freeze_min_age = freeze_min_age;
@@ -2822,12 +2853,7 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		tab->at_params.is_wraparound = wraparound;
 		tab->at_params.log_min_duration = log_min_duration;
 		tab->at_params.toast_parent = InvalidOid;
-
-		/*
-		 * Later, in vacuum_rel(), we check reloptions for any
-		 * vacuum_max_eager_freeze_failure_rate override.
-		 */
-		tab->at_params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+		tab->at_params.max_eager_freeze_failure_rate = max_eager_freeze_failure_rate;
 		tab->at_storage_param_vac_cost_limit = avopts ?
 			avopts->vacuum_cost_limit : 0;
 		tab->at_storage_param_vac_cost_delay = avopts ?
-- 
2.39.5 (Apple Git-154)


--QWBYbd5Ar5k8NvSv
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
	filename=v1-0003-autovac-combine-reloptions-correctly.patch



^ permalink  raw  reply  [nested|flat] 804+ messages in thread

* [PATCH v1 2/4] autovac: resolve relopts before vacuuming
@ 2025-06-23 19:42 Nathan Bossart <[email protected]>
  0 siblings, 0 replies; 804+ messages in thread

From: Nathan Bossart @ 2025-06-23 19:42 UTC (permalink / raw)

---
 src/backend/commands/vacuum.c       |  7 ++--
 src/backend/postmaster/autovacuum.c | 52 +++++++++++++++++++++--------
 2 files changed, 44 insertions(+), 15 deletions(-)

diff --git a/src/backend/commands/vacuum.c b/src/backend/commands/vacuum.c
index 33a33bf6b1c..0015b9ef4b0 100644
--- a/src/backend/commands/vacuum.c
+++ b/src/backend/commands/vacuum.c
@@ -421,7 +421,7 @@ ExecVacuum(ParseState *pstate, VacuumStmt *vacstmt, bool isTopLevel)
 	/*
 	 * Later, in vacuum_rel(), we check if a reloption override was specified.
 	 */
-	params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+	params.max_eager_freeze_failure_rate = -1.0;
 
 	/*
 	 * Create special memory context for cross-transaction storage.
@@ -2195,10 +2195,13 @@ vacuum_rel(Oid relid, RangeVar *relation, VacuumParams *params,
 	 * Check if the vacuum_max_eager_freeze_failure_rate table storage
 	 * parameter was specified. This overrides the GUC value.
 	 */
-	if (rel->rd_options != NULL &&
+	if (params->max_eager_freeze_failure_rate < 0 &&
+		rel->rd_options != NULL &&
 		((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate >= 0)
 		params->max_eager_freeze_failure_rate =
 			((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate;
+	else
+		params->max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
 
 	/*
 	 * Set truncate option based on truncate reloption or GUC if it wasn't
diff --git a/src/backend/postmaster/autovacuum.c b/src/backend/postmaster/autovacuum.c
index f86c9fed853..3bedca971ff 100644
--- a/src/backend/postmaster/autovacuum.c
+++ b/src/backend/postmaster/autovacuum.c
@@ -2758,6 +2758,9 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		int			multixact_freeze_table_age;
 		int			log_min_duration;
 		AutoVacOpts *avopts = (relopts ? &relopts->autovacuum : NULL);
+		VacOptValue index_cleanup;
+		VacOptValue truncate;
+		double		max_eager_freeze_failure_rate;
 
 		/*
 		 * Calculate the vacuum cost parameters and the freeze ages.  If there
@@ -2790,6 +2793,39 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			? avopts->multixact_freeze_table_age
 			: default_multixact_freeze_table_age;
 
+		if (relopts)
+		{
+			switch (relopts->vacuum_index_cleanup)
+			{
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_AUTO:
+					index_cleanup = VACOPTVALUE_AUTO;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_ON:
+					index_cleanup = VACOPTVALUE_ENABLED;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_OFF:
+					index_cleanup = VACOPTVALUE_DISABLED;
+					break;
+			}
+		}
+		else
+			index_cleanup = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_truncate_set)
+		{
+			if (relopts->vacuum_truncate)
+				truncate = VACOPTVALUE_ENABLED;
+			else
+				truncate = VACOPTVALUE_DISABLED;
+		}
+		else
+			truncate = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_max_eager_freeze_failure_rate >= 0)
+			max_eager_freeze_failure_rate = relopts->vacuum_max_eager_freeze_failure_rate;
+		else
+			max_eager_freeze_failure_rate = -1.0;
+
 		tab = palloc(sizeof(autovac_table));
 		tab->at_relid = relid;
 		tab->at_sharedrel = classForm->relisshared;
@@ -2806,13 +2842,8 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			(doanalyze ? VACOPT_ANALYZE : 0) |
 			(!wraparound ? VACOPT_SKIP_LOCKED : 0);
 
-		/*
-		 * index_cleanup and truncate are unspecified at first in autovacuum.
-		 * They will be filled in with usable values using their reloptions
-		 * (or reloption defaults) later.
-		 */
-		tab->at_params.index_cleanup = VACOPTVALUE_UNSPECIFIED;
-		tab->at_params.truncate = VACOPTVALUE_UNSPECIFIED;
+		tab->at_params.index_cleanup = index_cleanup;
+		tab->at_params.truncate = truncate;
 		/* As of now, we don't support parallel vacuum for autovacuum */
 		tab->at_params.nworkers = -1;
 		tab->at_params.freeze_min_age = freeze_min_age;
@@ -2822,12 +2853,7 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		tab->at_params.is_wraparound = wraparound;
 		tab->at_params.log_min_duration = log_min_duration;
 		tab->at_params.toast_parent = InvalidOid;
-
-		/*
-		 * Later, in vacuum_rel(), we check reloptions for any
-		 * vacuum_max_eager_freeze_failure_rate override.
-		 */
-		tab->at_params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+		tab->at_params.max_eager_freeze_failure_rate = max_eager_freeze_failure_rate;
 		tab->at_storage_param_vac_cost_limit = avopts ?
 			avopts->vacuum_cost_limit : 0;
 		tab->at_storage_param_vac_cost_delay = avopts ?
-- 
2.39.5 (Apple Git-154)


--QWBYbd5Ar5k8NvSv
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
	filename=v1-0003-autovac-combine-reloptions-correctly.patch



^ permalink  raw  reply  [nested|flat] 804+ messages in thread

* [PATCH v1 2/4] autovac: resolve relopts before vacuuming
@ 2025-06-23 19:42 Nathan Bossart <[email protected]>
  0 siblings, 0 replies; 804+ messages in thread

From: Nathan Bossart @ 2025-06-23 19:42 UTC (permalink / raw)

---
 src/backend/commands/vacuum.c       |  7 ++--
 src/backend/postmaster/autovacuum.c | 52 +++++++++++++++++++++--------
 2 files changed, 44 insertions(+), 15 deletions(-)

diff --git a/src/backend/commands/vacuum.c b/src/backend/commands/vacuum.c
index 33a33bf6b1c..0015b9ef4b0 100644
--- a/src/backend/commands/vacuum.c
+++ b/src/backend/commands/vacuum.c
@@ -421,7 +421,7 @@ ExecVacuum(ParseState *pstate, VacuumStmt *vacstmt, bool isTopLevel)
 	/*
 	 * Later, in vacuum_rel(), we check if a reloption override was specified.
 	 */
-	params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+	params.max_eager_freeze_failure_rate = -1.0;
 
 	/*
 	 * Create special memory context for cross-transaction storage.
@@ -2195,10 +2195,13 @@ vacuum_rel(Oid relid, RangeVar *relation, VacuumParams *params,
 	 * Check if the vacuum_max_eager_freeze_failure_rate table storage
 	 * parameter was specified. This overrides the GUC value.
 	 */
-	if (rel->rd_options != NULL &&
+	if (params->max_eager_freeze_failure_rate < 0 &&
+		rel->rd_options != NULL &&
 		((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate >= 0)
 		params->max_eager_freeze_failure_rate =
 			((StdRdOptions *) rel->rd_options)->vacuum_max_eager_freeze_failure_rate;
+	else
+		params->max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
 
 	/*
 	 * Set truncate option based on truncate reloption or GUC if it wasn't
diff --git a/src/backend/postmaster/autovacuum.c b/src/backend/postmaster/autovacuum.c
index f86c9fed853..3bedca971ff 100644
--- a/src/backend/postmaster/autovacuum.c
+++ b/src/backend/postmaster/autovacuum.c
@@ -2758,6 +2758,9 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		int			multixact_freeze_table_age;
 		int			log_min_duration;
 		AutoVacOpts *avopts = (relopts ? &relopts->autovacuum : NULL);
+		VacOptValue index_cleanup;
+		VacOptValue truncate;
+		double		max_eager_freeze_failure_rate;
 
 		/*
 		 * Calculate the vacuum cost parameters and the freeze ages.  If there
@@ -2790,6 +2793,39 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			? avopts->multixact_freeze_table_age
 			: default_multixact_freeze_table_age;
 
+		if (relopts)
+		{
+			switch (relopts->vacuum_index_cleanup)
+			{
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_AUTO:
+					index_cleanup = VACOPTVALUE_AUTO;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_ON:
+					index_cleanup = VACOPTVALUE_ENABLED;
+					break;
+				case STDRD_OPTION_VACUUM_INDEX_CLEANUP_OFF:
+					index_cleanup = VACOPTVALUE_DISABLED;
+					break;
+			}
+		}
+		else
+			index_cleanup = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_truncate_set)
+		{
+			if (relopts->vacuum_truncate)
+				truncate = VACOPTVALUE_ENABLED;
+			else
+				truncate = VACOPTVALUE_DISABLED;
+		}
+		else
+			truncate = VACOPTVALUE_UNSPECIFIED;
+
+		if (relopts && relopts->vacuum_max_eager_freeze_failure_rate >= 0)
+			max_eager_freeze_failure_rate = relopts->vacuum_max_eager_freeze_failure_rate;
+		else
+			max_eager_freeze_failure_rate = -1.0;
+
 		tab = palloc(sizeof(autovac_table));
 		tab->at_relid = relid;
 		tab->at_sharedrel = classForm->relisshared;
@@ -2806,13 +2842,8 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 			(doanalyze ? VACOPT_ANALYZE : 0) |
 			(!wraparound ? VACOPT_SKIP_LOCKED : 0);
 
-		/*
-		 * index_cleanup and truncate are unspecified at first in autovacuum.
-		 * They will be filled in with usable values using their reloptions
-		 * (or reloption defaults) later.
-		 */
-		tab->at_params.index_cleanup = VACOPTVALUE_UNSPECIFIED;
-		tab->at_params.truncate = VACOPTVALUE_UNSPECIFIED;
+		tab->at_params.index_cleanup = index_cleanup;
+		tab->at_params.truncate = truncate;
 		/* As of now, we don't support parallel vacuum for autovacuum */
 		tab->at_params.nworkers = -1;
 		tab->at_params.freeze_min_age = freeze_min_age;
@@ -2822,12 +2853,7 @@ table_recheck_autovac(Oid relid, HTAB *table_toast_map,
 		tab->at_params.is_wraparound = wraparound;
 		tab->at_params.log_min_duration = log_min_duration;
 		tab->at_params.toast_parent = InvalidOid;
-
-		/*
-		 * Later, in vacuum_rel(), we check reloptions for any
-		 * vacuum_max_eager_freeze_failure_rate override.
-		 */
-		tab->at_params.max_eager_freeze_failure_rate = vacuum_max_eager_freeze_failure_rate;
+		tab->at_params.max_eager_freeze_failure_rate = max_eager_freeze_failure_rate;
 		tab->at_storage_param_vac_cost_limit = avopts ?
 			avopts->vacuum_cost_limit : 0;
 		tab->at_storage_param_vac_cost_delay = avopts ?
-- 
2.39.5 (Apple Git-154)


--QWBYbd5Ar5k8NvSv
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment;
	filename=v1-0003-autovac-combine-reloptions-correctly.patch



^ permalink  raw  reply  [nested|flat] 804+ messages in thread