agora inbox for [email protected]  

help / color / mirror / Atom feed

Re: time-delayed standbys
970+ messages / 4 participants
[nested] [flat]

* Re: time-delayed standbys
@ 2011-05-07 13:48 Robert Haas <[email protected]>
  2011-05-11 05:29 ` Re: time-delayed standbys Fujii Masao <[email protected]>
  2011-05-11 09:27 ` Re: time-delayed standbys Heikki Linnakangas <[email protected]>
  0 siblings, 2 replies; 970+ messages in thread

From: Robert Haas @ 2011-05-07 13:48 UTC (permalink / raw)
  To: Jaime Casanova <[email protected]>; +Cc: pgsql-hackers

On Sat, Apr 23, 2011 at 9:46 PM, Jaime Casanova <[email protected]> wrote:
> On Tue, Apr 19, 2011 at 9:47 PM, Robert Haas <[email protected]> wrote:
>>
>> That is, a standby configured such that replay lags a prescribed
>> amount of time behind the master.
>>
>> This seemed easy to implement, so I did.  Patch (for 9.2, obviously) attached.
>>
>
> This crashes when stoping recovery to a target (i tried with a named
> restore point and with a poin in time) after executing
> pg_xlog_replay_resume(). here is the backtrace. I will try to check
> later but i wanted to report it before...
>
> #0  0xb7777537 in raise () from /lib/libc.so.6
> #1  0xb777a922 in abort () from /lib/libc.so.6
> #2  0x08393a19 in errfinish (dummy=0) at elog.c:513
> #3  0x083944ba in elog_finish (elevel=22, fmt=0x83d5221 "wal receiver
> still active") at elog.c:1156
> #4  0x080f04cb in StartupXLOG () at xlog.c:6691
> #5  0x080f2825 in StartupProcessMain () at xlog.c:10050
> #6  0x0811468f in AuxiliaryProcessMain (argc=2, argv=0xbfa326a8) at
> bootstrap.c:417
> #7  0x0827c2ea in StartChildProcess (type=StartupProcess) at postmaster.c:4488
> #8  0x08280b85 in PostmasterMain (argc=3, argv=0xa4c17e8) at postmaster.c:1106
> #9  0x0821730f in main (argc=3, argv=0xa4c17e8) at main.c:199

Sorry for the slow response on this - I was on vacation for a week and
my schedule got a big hole in it.

I was able to reproduce something very like this in unpatched master,
just by letting recovery pause at a named restore point, and then
resuming it.

LOG:  recovery stopping at restore point "stop", time 2011-05-07
09:28:01.652958-04
LOG:  recovery has paused
HINT:  Execute pg_xlog_replay_resume() to continue.
(at this point I did pg_xlog_replay_resume())
LOG:  redo done at 0/5000020
PANIC:  wal receiver still active
LOG:  startup process (PID 38762) was terminated by signal 6: Abort trap
LOG:  terminating any other active server processes

I'm thinking that this code is wrong:

                    if (recoveryPauseAtTarget && standbyState ==
STANDBY_SNAPSHOT_READY)
                    {
                        SetRecoveryPause(true);
                        recoveryPausesHere();
                    }
                    reachedStopPoint = true;    /* see below */
                    recoveryContinue = false;

I think that recoveryContinue = false assignment should not happen if
we decide to pause.  That is, we should say if (recoveryPauseAtTarget
&& standbyState == STANDBY_SNAPSHOT_READY) { same as now } else
recoveryContinue = false.

I haven't tested that, though.

-- 
Robert Haas
EnterpriseDB: http://www.enterprisedb.com
The Enterprise PostgreSQL Company



^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* Re: time-delayed standbys
  2011-05-07 13:48 Re: time-delayed standbys Robert Haas <[email protected]>
@ 2011-05-11 05:29 ` Fujii Masao <[email protected]>
  2011-05-11 11:16   ` Re: time-delayed standbys Fujii Masao <[email protected]>
  1 sibling, 1 reply; 970+ messages in thread

From: Fujii Masao @ 2011-05-11 05:29 UTC (permalink / raw)
  To: Robert Haas <[email protected]>; +Cc: Jaime Casanova <[email protected]>; pgsql-hackers

On Sat, May 7, 2011 at 10:48 PM, Robert Haas <[email protected]> wrote:
> I was able to reproduce something very like this in unpatched master,
> just by letting recovery pause at a named restore point, and then
> resuming it.

I was able to reproduce the same problem even in 9.0. When the standby
reaches the recovery target, it always tries to end the recovery even
though walreceiver is still running, which causes the problem. This seems
to be an oversight in streaming replication. I should have considered how
the standby should work when recovery_target is specified.

What about the attached patch? Which stops walreceiver instead of
emitting PANIC there only if we've reached the recovery target.

Regards,

-- 
Fujii Masao
NIPPON TELEGRAPH AND TELEPHONE CORPORATION
NTT Open Source Software Center


Attachments:

  [application/octet-stream] recovery_target_v1.patch (1.1K, ../../[email protected]/2-recovery_target_v1.patch)
  download | inline diff:
*** a/src/backend/access/transam/xlog.c
--- b/src/backend/access/transam/xlog.c
***************
*** 6611,6622 **** StartupXLOG(void)
  	}
  
  	/*
! 	 * If we launched a WAL receiver, it should be gone by now. It will trump
! 	 * over the startup checkpoint and subsequent records if it's still alive,
! 	 * so be extra sure that it's gone.
  	 */
  	if (WalRcvInProgress())
! 		elog(PANIC, "wal receiver still active");
  
  	/*
  	 * We don't need the latch anymore. It's not strictly necessary to disown
--- 6611,6629 ----
  	}
  
  	/*
! 	 * If we launched a WAL receiver, it should be gone by now except when
! 	 * we've reached the recovery target. Only if we reached the recovery
! 	 * target, a WAL receiver can still be running, so we stop it and wait
! 	 * for it to die. It will trump over the startup checkpoint and
! 	 * subsequent records if it's still alive, so be extra sure that it's gone.
  	 */
  	if (WalRcvInProgress())
! 	{
! 		if (reachedStopPoint)
! 			ShutdownWalRcv();
! 		else
! 			elog(PANIC, "wal receiver still active");
! 	}
  
  	/*
  	 * We don't need the latch anymore. It's not strictly necessary to disown


^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* Re: time-delayed standbys
  2011-05-07 13:48 Re: time-delayed standbys Robert Haas <[email protected]>
  2011-05-11 05:29 ` Re: time-delayed standbys Fujii Masao <[email protected]>
@ 2011-05-11 11:16   ` Fujii Masao <[email protected]>
  2011-05-11 11:53     ` Re: time-delayed standbys Heikki Linnakangas <[email protected]>
  0 siblings, 1 reply; 970+ messages in thread

From: Fujii Masao @ 2011-05-11 11:16 UTC (permalink / raw)
  To: Heikki Linnakangas <[email protected]>; +Cc: Robert Haas <[email protected]>; Jaime Casanova <[email protected]>; pgsql-hackers

On Wed, May 11, 2011 at 6:50 PM, Heikki Linnakangas
<[email protected]> wrote:
> I think we can just always call ShutdownWalRcv(). It should be gone if the
> server was promoted while streaming, but that's just an implementation
> detail of what the promotion code does. There's no hard reason why it
> shouldn't be running at that point anymore, as long as we kill it before
> going any further.

Okay. But I'd like to add the following assertion check just before
ShutdownWalRcv() which you added, in order to detect such a bug
that we found this time, i.e., the bug which causes unexpected end
of recovery. Thought?

    Assert(reachedStopPoint || !WalRcvInProgress())

> Committed a patch to do that.

Thanks. Should we backport it to 9.0? 9.0 has the same problem.

Regards,

-- 
Fujii Masao
NIPPON TELEGRAPH AND TELEPHONE CORPORATION
NTT Open Source Software Center



^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* Re: time-delayed standbys
  2011-05-07 13:48 Re: time-delayed standbys Robert Haas <[email protected]>
  2011-05-11 05:29 ` Re: time-delayed standbys Fujii Masao <[email protected]>
  2011-05-11 11:16   ` Re: time-delayed standbys Fujii Masao <[email protected]>
@ 2011-05-11 11:53     ` Heikki Linnakangas <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Heikki Linnakangas @ 2011-05-11 11:53 UTC (permalink / raw)
  To: Fujii Masao <[email protected]>; +Cc: Robert Haas <[email protected]>; Jaime Casanova <[email protected]>; pgsql-hackers

On 11.05.2011 14:16, Fujii Masao wrote:
> On Wed, May 11, 2011 at 6:50 PM, Heikki Linnakangas
> <[email protected]>  wrote:
>> I think we can just always call ShutdownWalRcv(). It should be gone if the
>> server was promoted while streaming, but that's just an implementation
>> detail of what the promotion code does. There's no hard reason why it
>> shouldn't be running at that point anymore, as long as we kill it before
>> going any further.
>
> Okay. But I'd like to add the following assertion check just before
> ShutdownWalRcv() which you added, in order to detect such a bug
> that we found this time, i.e., the bug which causes unexpected end
> of recovery. Thought?
>
>      Assert(reachedStopPoint || !WalRcvInProgress())

There's no unexpected end of recovery here. The recovery ends when we 
reach the target, as it should. It was the assumption that WAL receiver 
can't be running at that point anymore that was wrong.

That assertion would work, AFAICS, but I don't think it's something we 
need to assert. There isn't any harm done if WAL receiver is still 
running, as long as we shut it down at that point.

>> Committed a patch to do that.
>
> Thanks. Should we backport it to 9.0? 9.0 has the same problem.

Ah, thanks, missed that, Cherry-picked to 9.0 now as well.

-- 
   Heikki Linnakangas
   EnterpriseDB   http://www.enterprisedb.com



^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* Re: time-delayed standbys
  2011-05-07 13:48 Re: time-delayed standbys Robert Haas <[email protected]>
@ 2011-05-11 09:27 ` Heikki Linnakangas <[email protected]>
  1 sibling, 0 replies; 970+ messages in thread

From: Heikki Linnakangas @ 2011-05-11 09:27 UTC (permalink / raw)
  To: Robert Haas <[email protected]>; +Cc: Jaime Casanova <[email protected]>; pgsql-hackers

On 07.05.2011 16:48, Robert Haas wrote:
> I was able to reproduce something very like this in unpatched master,
> just by letting recovery pause at a named restore point, and then
> resuming it.
>
> LOG:  recovery stopping at restore point "stop", time 2011-05-07
> 09:28:01.652958-04
> LOG:  recovery has paused
> HINT:  Execute pg_xlog_replay_resume() to continue.
> (at this point I did pg_xlog_replay_resume())
> LOG:  redo done at 0/5000020
> PANIC:  wal receiver still active
> LOG:  startup process (PID 38762) was terminated by signal 6: Abort trap
> LOG:  terminating any other active server processes
>
> I'm thinking that this code is wrong:
>
>                      if (recoveryPauseAtTarget&&  standbyState ==
> STANDBY_SNAPSHOT_READY)
>                      {
>                          SetRecoveryPause(true);
>                          recoveryPausesHere();
>                      }
>                      reachedStopPoint = true;    /* see below */
>                      recoveryContinue = false;
>
> I think that recoveryContinue = false assignment should not happen if
> we decide to pause.  That is, we should say if (recoveryPauseAtTarget
> &&  standbyState == STANDBY_SNAPSHOT_READY) { same as now } else
> recoveryContinue = false.

No, recovery stops at that point whether or not you pause. Resuming 
after stopping at the recovery target doesn't mean that you resume 
recovery, it means that you resume to end recovery and start up the 
server (see the 2nd to last paragraph at 
http://www.postgresql.org/docs/9.1/static/recovery-target-settings.html). It 
would probably be more useful to allow a new stopping target to be set 
and continue recovery, but the current pause/resume functions don't 
allow that.

-- 
   Heikki Linnakangas
   EnterpriseDB   http://www.enterprisedb.com



^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread

* [PATCH] Do not push the active snapshot for copy_table_data before it's needed.
@ 2026-04-10 10:17 Antonin Houska <[email protected]>
  0 siblings, 0 replies; 970+ messages in thread

From: Antonin Houska @ 2026-04-10 10:17 UTC (permalink / raw)

make_new_heap() can launch parallel workers when building index on TOAST
relation. If the snapshot for copy_table_data() is already the active
snapshot, the workers can incorrectly consider it their transaction snapshot.
---
 src/backend/commands/repack.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 58e3867246f..08fd132a4e3 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -1013,8 +1013,6 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Wait until the worker has the initial snapshot and retrieve it.
 		 */
 		snapshot = get_initial_snapshot(decoding_worker);
-
-		PushActiveSnapshot(snapshot);
 	}
 
 	/* for CLUSTER or REPACK USING INDEX, mark the index as the one to use */
@@ -1038,6 +1036,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 	NewHeap = table_open(OIDNewHeap, NoLock);
 
 	/* Copy the heap data into the new table in the desired order */
+	if (snapshot)
+		PushActiveSnapshot(snapshot);
 	copy_table_data(NewHeap, OldHeap, index, snapshot, verbose,
 					&swap_toast_by_content, &frozenXid, &cutoffMulti);
 
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 970+ messages in thread