agora inbox for [email protected]
help / color / mirror / Atom feedRe: Practical impediment to supporting multiple SSL libraries
2889+ messages / 2 participants
[nested] [flat]
* Re: Practical impediment to supporting multiple SSL libraries
@ 2006-04-13 08:26 Dave Page <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Dave Page @ 2006-04-13 08:26 UTC (permalink / raw)
To: Martijn van Oosterhout <[email protected]>; +Cc: pgsql-hackers; Hiroshi Inoue <[email protected]>
> -----Original Message-----
> From: Martijn van Oosterhout [mailto:[email protected]]
> Sent: 13 April 2006 09:15
> To: Dave Page
> Cc: [email protected]; Hiroshi Inoue
> Subject: Re: [HACKERS] Practical impediment to supporting
> multiple SSL libraries
>
> On Thu, Apr 13, 2006 at 08:48:54AM +0100, Dave Page wrote:
> > Well, we had a pure custom implementation of the protocol,
> had a pure
> > libpq based version and after much discussion decided that the best
> > version of all was the hybrid as it allowed us to hijack
> features like
> > SSL, Kerberos, pgpass et al, yet not be constrained by the
> limitations
> > of libpq, or copy query results about so much.
>
> Right. Would you see value in a more formal libpq "hijack-me"
> interface that would support making the initial connection
> and then handing off the rest to something else?
>
> I'm wondering because obviously with the current setup, if
> libpq is compiled with SSL support, psqlODBC must also be.
> Are there any points where you have to fight libpq over
> control of the socket?
>
> I'm thinking that such an interface would need to provide the
> following:
>
> read (sync/async)
> write (sync/async)
> getfd (for select/poll)
> ispending (is there stuff to do)
> release (for when you're finished)
>
> Is there anything else you might need?
I'll have to let Hiroshi comment on that as he wrote the code. I've only
skimmed over it a few times so far.
Regards, Dave.
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v53 5/7] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index f2759cdbef1..8d9b2b2e370 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -279,6 +279,21 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
/* Determine the lock mode to use. */
lockmode = RepackLockLevel((params.options & CLUOPT_CONCURRENT) != 0);
+ if ((params.options & CLUOPT_CONCURRENT) != 0)
+ {
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose any functionality.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+ }
+
/*
* If a single relation is specified, process it and we're done ... unless
* the relation is a partitioned table, in which case we fall through.
@@ -511,19 +526,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could deadlock
- * if there's an XID already assigned. It would be possible to run in
- * a transaction block if we had no XID, but this restriction is
- * simpler for users to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--qr3jlalmmcpkiodg
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v53-0006-Error-out-any-process-that-would-block-at-REPACK.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v52 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--gp2pyozrd5pweboh
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v52-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
* [PATCH v51 07/10] Check for transaction block early in ExecRepack
@ 2026-04-03 15:23 Srinath Reddy Sadipiralla <[email protected]>
0 siblings, 0 replies; 2889+ messages in thread
From: Srinath Reddy Sadipiralla @ 2026-04-03 15:23 UTC (permalink / raw)
Currently, executing REPACK (CONCURRENTLY) without a table name inside a
transaction block throws the error "REPACK CONCURRENTLY requires explicit
table name" instead of the expected transaction block error. This occurs
because ExecRepack() validates the parsed options and missing relation
before verifying the transaction state.
This behavior is inconsistent with other utility commands like VACUUM
,REINDEX, etc; which invoke PreventInTransactionBlock() at the very start
of their execution to properly reject execution inside user transactions
before validating targets.
Add PreventInTransactionBlock to the top of ExecRepack() to enforce the
transaction block restriction early. This prevents the user from fixing
a missing table error only to immediately hit a transaction block error,
and also ensures consistency with rest of the commands.
Author: Srinath Reddy Sadipiralla <[email protected]>
---
src/backend/commands/repack.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index d6e446d582d..d4c1f0e7652 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -292,6 +292,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
LWLockRelease(ProcArrayLock);
+
+ /*
+ * Make sure we're not in a transaction block.
+ *
+ * The reason is that repack_setup_logical_decoding() could wait
+ * indefinitely for our XID to complete. (The deadlock detector would
+ * not recognize it because we'd be waiting for ourselves, i.e. no
+ * real lock conflict.) It would be possible to run in a transaction
+ * block if we had no XID, but this restriction is simpler for users
+ * to understand and we don't lose anything.
+ */
+ PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
}
/*
@@ -523,21 +535,7 @@ cluster_rel(RepackCommand cmd, Relation OldHeap, Oid indexOid,
* replica index OID.
*/
if (concurrent)
- {
- /*
- * Make sure we're not in a transaction block.
- *
- * The reason is that repack_setup_logical_decoding() could wait
- * indefinitely for our XID to complete. (The deadlock detector would
- * not recognize it because we'd be waiting for ourselves, i.e. no
- * real lock conflict.) It would be possible to run in a transaction
- * block if we had no XID, but this restriction is simpler for users
- * to understand and we don't lose anything.
- */
- PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
-
check_repack_concurrently_requirements(OldHeap, &ident_idx);
- }
/* Check for user-requested abort. */
CHECK_FOR_INTERRUPTS();
--
2.47.3
--r2slln3zpmilwu22
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v51-0008-Introduce-an-option-to-make-logical-replication-.patch"
^ permalink raw reply [nested|flat] 2889+ messages in thread
end of thread, other threads:[~2026-04-03 15:23 UTC | newest]
Thread overview: 2889+ messages (download: mbox mbox.gz follow: Atom feed)
-- links below jump to the message on this page --
2006-04-13 08:26 Re: Practical impediment to supporting multiple SSL libraries Dave Page <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v53 5/7] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v52 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
2026-04-03 15:23 [PATCH v51 07/10] Check for transaction block early in ExecRepack Srinath Reddy Sadipiralla <[email protected]>
This inbox is served by agora; see mirroring instructions
for how to clone and mirror all data and code used for this inbox