agora inbox for [email protected]
help / color / mirror / Atom feed[PATCH 3/4] PoC add prune-by-number-of-entries feature
56+ messages / 3 participants
[nested] [flat]
* [PATCH 3/4] PoC add prune-by-number-of-entries feature
@ 2019-02-06 05:36 Kyotaro Horiguchi <[email protected]>
0 siblings, 0 replies; 56+ messages in thread
From: Kyotaro Horiguchi @ 2019-02-06 05:36 UTC (permalink / raw)
Adds prune based on the number of cache entries on top of the current
pruning patch. It is controlled by two GUC variables.
cache_entry_limit: limit of the number of entries per catcache
cache_entry_limit_prune_ratio: how much of entries to remove at pruning
---
src/backend/utils/cache/catcache.c | 108 ++++++++++++++++++++++++++++++++++++-
src/backend/utils/misc/guc.c | 40 ++++++++++++++
src/include/utils/catcache.h | 2 +
3 files changed, 149 insertions(+), 1 deletion(-)
diff --git a/src/backend/utils/cache/catcache.c b/src/backend/utils/cache/catcache.c
index 950576fea0..ecea5b603c 100644
--- a/src/backend/utils/cache/catcache.c
+++ b/src/backend/utils/cache/catcache.c
@@ -77,6 +77,11 @@
*/
int cache_memory_target = 0;
+
+/* PoC entry limit */
+int cache_entry_limit = 0;
+double cache_entry_limit_prune_ratio = 0.8;
+
/* GUC variable to define the minimum age of entries that will be cosidered to
* be evicted in seconds. This variable is shared among various cache
* mechanisms.
@@ -882,6 +887,102 @@ InitCatCache(int id,
return cp;
}
+/*
+ * CatCacheCleanupOldEntriesByNum -
+ * Poc remove infrequently-used entries by number of entries.
+ */
+static bool
+CatCacheCleanupOldEntriesByNum(CatCache *cp, int cache_entry_limit)
+{
+ int i;
+ int n;
+ int oldndelelem = cp->cc_ntup;
+ int ndelelem;
+ CatCTup **ct_array;
+
+ ndelelem = oldndelelem - (int)(cache_entry_limit * cache_entry_limit_prune_ratio);
+
+ /* lower limit: quite arbitrary */
+ if (ndelelem < 256)
+ ndelelem = 256;
+
+ /*
+ * partial sort array: [0] contains latest access entry
+ * [1] contains ealiest access entry
+ */
+ ct_array = (CatCTup **) palloc(ndelelem * sizeof(CatCTup*));
+ n = 0;
+
+ /*
+ * Collect entries to be removed, which have older lastaccess.
+ * Using heap bound sort like tuplesort.c.
+ */
+ for (i = 0; i < cp->cc_nbuckets; i++)
+ {
+ dlist_mutable_iter iter;
+
+ dlist_foreach_modify(iter, &cp->cc_bucket[i])
+ {
+ CatCTup *ct = dlist_container(CatCTup, cache_elem, iter.cur);
+
+ /* Don't remove referenced entries */
+ if (ct->refcount != 0 ||
+ (ct->c_list && ct->c_list->refcount != 0))
+ continue;
+
+ if (n < ndelelem)
+ {
+ /* Fill up the min heap array */
+ int j = n++;
+
+ while (j > 0)
+ {
+ int i = (j - 1) >> 1;
+
+ if (ct->lastaccess >= ct_array[i]->lastaccess)
+ break;
+ ct_array[j] = ct_array[i];
+ j = i;
+ }
+ ct_array[j] = ct;
+ }
+ else if (ct->lastaccess > ct_array[0]->lastaccess)
+ {
+ /* older than the oldest in the array, add it */
+ unsigned int i;
+
+ i = 0;
+
+ for (;;)
+ {
+ unsigned int j = 2 * i + 1;
+
+ if (j >= n)
+ break;
+ if (j + 1 < n &&
+ ct_array[j]->lastaccess > ct_array[j + 1]->lastaccess)
+ j++;
+ if (ct->lastaccess <= ct_array[j]->lastaccess)
+ break;
+ ct_array[i] = ct_array[j];
+ i = j;
+ }
+ ct_array[i] = ct;
+ }
+ }
+ }
+
+ /* Now we have the list of elements to be deleted */
+ for (i = 0 ; i < n && ct_array[i]; i++)
+ CatCacheRemoveCTup(cp, ct_array[i]);
+
+ pfree(ct_array);
+
+ elog(LOG, "Catcache pruned by entry number: id=%d, %d => %d", cp->id, oldndelelem, cp->cc_ntup);
+
+ return true;
+}
+
/*
* CatCacheCleanupOldEntries - Remove infrequently-used entries
*
@@ -923,7 +1024,7 @@ CatCacheCleanupOldEntries(CatCache *cp)
hash_size = cp->cc_nbuckets * sizeof(dlist_head);
if (hash_size + cp->cc_tupsize < (Size) cache_memory_target * 1024L)
return false;
-
+
/*
* Search the whole hash for entries to remove. This is a quite time
* consuming task during catcache lookup, but accetable since now we are
@@ -2049,6 +2150,11 @@ CatalogCacheCreateEntry(CatCache *cache, HeapTuple ntp, Datum *arguments,
/* increase refcount so that this survives pruning */
ct->refcount++;
+
+ /* cap number of entries */
+ if (cache_entry_limit > 0 && cache->cc_ntup > cache_entry_limit)
+ CatCacheCleanupOldEntriesByNum(cache, cache_entry_limit);
+
/*
* If the hash table has become too full, try cleanup by removing
* infrequently used entries to make a room for the new entry. If it
diff --git a/src/backend/utils/misc/guc.c b/src/backend/utils/misc/guc.c
index 32e41253a6..7bb239a07e 100644
--- a/src/backend/utils/misc/guc.c
+++ b/src/backend/utils/misc/guc.c
@@ -2227,6 +2227,36 @@ static struct config_int ConfigureNamesInt[] =
NULL, NULL, NULL
},
+ {
+ {"cache_entry_limit", PGC_USERSET, RESOURCES_MEM,
+ gettext_noop("Sets the maximum entries of catcache."),
+ NULL
+ },
+ &cache_entry_limit,
+ 0, 0, INT_MAX,
+ NULL, NULL, NULL
+ },
+
+ {
+ {"cache_entry_limit", PGC_USERSET, RESOURCES_MEM,
+ gettext_noop("Sets the maximum entries of catcache."),
+ NULL
+ },
+ &cache_entry_limit,
+ 0, 0, INT_MAX,
+ NULL, NULL, NULL
+ },
+
+ {
+ {"cache_entry_limit", PGC_USERSET, RESOURCES_MEM,
+ gettext_noop("Sets the maximum entries of catcache."),
+ NULL
+ },
+ &cache_entry_limit,
+ 0, 0, INT_MAX,
+ NULL, NULL, NULL
+ },
+
/*
* We use the hopefully-safely-small value of 100kB as the compiled-in
* default for max_stack_depth. InitializeGUCOptions will increase it if
@@ -3401,6 +3431,16 @@ static struct config_real ConfigureNamesReal[] =
NULL, NULL, NULL
},
+ {
+ {"cache_entry_limit_prune_ratio", PGC_USERSET, RESOURCES_MEM,
+ gettext_noop("Sets the maximum entries of catcache."),
+ NULL
+ },
+ &cache_entry_limit_prune_ratio,
+ 0.8, 0.0, 1.0,
+ NULL, NULL, NULL
+ },
+
/* End-of-list marker */
{
{NULL, 0, 0, NULL, NULL}, NULL, 0.0, 0.0, 0.0, NULL, NULL, NULL
diff --git a/src/include/utils/catcache.h b/src/include/utils/catcache.h
index 4d51975920..1f7fb51ac0 100644
--- a/src/include/utils/catcache.h
+++ b/src/include/utils/catcache.h
@@ -193,6 +193,8 @@ extern PGDLLIMPORT MemoryContext CacheMemoryContext;
/* for guc.c, not PGDLLPMPORT'ed */
extern int cache_prune_min_age;
extern int cache_memory_target;
+extern int cache_entry_limit;
+extern double cache_entry_limit_prune_ratio;
/* to use as access timestamp of catcache entries */
extern TimestampTz catcacheclock;
--
2.16.3
----Next_Part(Wed_Feb_06_17_37_04_2019_764)----
^ permalink raw reply [nested|flat] 56+ messages in thread
* [PATCH v3 01/11] Change section heading to better reflect saving a result in variable(s)
@ 2023-09-24 20:49 Karl O. Pinc <[email protected]>
0 siblings, 0 replies; 56+ messages in thread
From: Karl O. Pinc @ 2023-09-24 20:49 UTC (permalink / raw)
The current section title of "Executing a Command with a Single-Row
Result" does not reflect what the section is really about. Other
sections make clear how to _execute_ commands, single-row result or not.
What this section is about is how to _save_ a single row of results into
variable(s).
It would be nice to talk about saving results into variables in the
section heading but I couldn't come up with anything pithy. "Saving a
Single-Row of a Command's Result" seems good enough, especially since
there's few other places to save results other than in variables.
---
doc/src/sgml/plpgsql.sgml | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/doc/src/sgml/plpgsql.sgml b/doc/src/sgml/plpgsql.sgml
index f55e901c7e..8747e84245 100644
--- a/doc/src/sgml/plpgsql.sgml
+++ b/doc/src/sgml/plpgsql.sgml
@@ -1126,7 +1126,7 @@ PERFORM create_mv('cs_session_page_requests_mv', my_query);
</sect2>
<sect2 id="plpgsql-statements-sql-onerow">
- <title>Executing a Command with a Single-Row Result</title>
+ <title>Saving a Single-Row of a Command's Result</title>
<indexterm zone="plpgsql-statements-sql-onerow">
<primary>SELECT INTO</primary>
--
2.30.2
--MP_/.arW0LC=Yi8JO9BRih4YlyS
Content-Type: text/x-patch
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
filename=v3-0002-Change-section-heading-to-better-describe-referen.patch
^ permalink raw reply [nested|flat] 56+ messages in thread
* [PATCH v4 01/12] Change section heading to better reflect saving a result in variable(s)
@ 2023-09-24 20:49 Karl O. Pinc <[email protected]>
0 siblings, 0 replies; 56+ messages in thread
From: Karl O. Pinc @ 2023-09-24 20:49 UTC (permalink / raw)
The current section title of "Executing a Command with a Single-Row
Result" does not reflect what the section is really about. Other
sections make clear how to _execute_ commands, single-row result or not.
What this section is about is how to _save_ a single row of results into
variable(s).
It would be nice to talk about saving results into variables in the
section heading but I couldn't come up with anything pithy. "Saving a
Single-Row of a Command's Result" seems good enough, especially since
there's few other places to save results other than in variables.
---
doc/src/sgml/plpgsql.sgml | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/doc/src/sgml/plpgsql.sgml b/doc/src/sgml/plpgsql.sgml
index f55e901c7e..8747e84245 100644
--- a/doc/src/sgml/plpgsql.sgml
+++ b/doc/src/sgml/plpgsql.sgml
@@ -1126,7 +1126,7 @@ PERFORM create_mv('cs_session_page_requests_mv', my_query);
</sect2>
<sect2 id="plpgsql-statements-sql-onerow">
- <title>Executing a Command with a Single-Row Result</title>
+ <title>Saving a Single-Row of a Command's Result</title>
<indexterm zone="plpgsql-statements-sql-onerow">
<primary>SELECT INTO</primary>
--
2.30.2
--MP_/OOXZvOwbpccKfGOtE9/SwX6
Content-Type: text/x-patch
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
filename=v4-0002-Change-section-heading-to-better-describe-referen.patch
^ permalink raw reply [nested|flat] 56+ messages in thread
* [PATCH v4 01/12] Change section heading to better reflect saving a result in variable(s)
@ 2023-09-24 20:49 Karl O. Pinc <[email protected]>
0 siblings, 0 replies; 56+ messages in thread
From: Karl O. Pinc @ 2023-09-24 20:49 UTC (permalink / raw)
The current section title of "Executing a Command with a Single-Row
Result" does not reflect what the section is really about. Other
sections make clear how to _execute_ commands, single-row result or not.
What this section is about is how to _save_ a single row of results into
variable(s).
It would be nice to talk about saving results into variables in the
section heading but I couldn't come up with anything pithy. "Saving a
Single-Row of a Command's Result" seems good enough, especially since
there's few other places to save results other than in variables.
---
doc/src/sgml/plpgsql.sgml | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/doc/src/sgml/plpgsql.sgml b/doc/src/sgml/plpgsql.sgml
index f55e901c7e..8747e84245 100644
--- a/doc/src/sgml/plpgsql.sgml
+++ b/doc/src/sgml/plpgsql.sgml
@@ -1126,7 +1126,7 @@ PERFORM create_mv('cs_session_page_requests_mv', my_query);
</sect2>
<sect2 id="plpgsql-statements-sql-onerow">
- <title>Executing a Command with a Single-Row Result</title>
+ <title>Saving a Single-Row of a Command's Result</title>
<indexterm zone="plpgsql-statements-sql-onerow">
<primary>SELECT INTO</primary>
--
2.30.2
--MP_/OOXZvOwbpccKfGOtE9/SwX6
Content-Type: text/x-patch
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
filename=v4-0002-Change-section-heading-to-better-describe-referen.patch
^ permalink raw reply [nested|flat] 56+ messages in thread
* [PATCH v4 01/12] Change section heading to better reflect saving a result in variable(s)
@ 2023-09-24 20:49 Karl O. Pinc <[email protected]>
0 siblings, 0 replies; 56+ messages in thread
From: Karl O. Pinc @ 2023-09-24 20:49 UTC (permalink / raw)
The current section title of "Executing a Command with a Single-Row
Result" does not reflect what the section is really about. Other
sections make clear how to _execute_ commands, single-row result or not.
What this section is about is how to _save_ a single row of results into
variable(s).
It would be nice to talk about saving results into variables in the
section heading but I couldn't come up with anything pithy. "Saving a
Single-Row of a Command's Result" seems good enough, especially since
there's few other places to save results other than in variables.
---
doc/src/sgml/plpgsql.sgml | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/doc/src/sgml/plpgsql.sgml b/doc/src/sgml/plpgsql.sgml
index f55e901c7e..8747e84245 100644
--- a/doc/src/sgml/plpgsql.sgml
+++ b/doc/src/sgml/plpgsql.sgml
@@ -1126,7 +1126,7 @@ PERFORM create_mv('cs_session_page_requests_mv', my_query);
</sect2>
<sect2 id="plpgsql-statements-sql-onerow">
- <title>Executing a Command with a Single-Row Result</title>
+ <title>Saving a Single-Row of a Command's Result</title>
<indexterm zone="plpgsql-statements-sql-onerow">
<primary>SELECT INTO</primary>
--
2.30.2
--MP_/OOXZvOwbpccKfGOtE9/SwX6
Content-Type: text/x-patch
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
filename=v4-0002-Change-section-heading-to-better-describe-referen.patch
^ permalink raw reply [nested|flat] 56+ messages in thread
* [PATCH v4 01/12] Change section heading to better reflect saving a result in variable(s)
@ 2023-09-24 20:49 Karl O. Pinc <[email protected]>
0 siblings, 0 replies; 56+ messages in thread
From: Karl O. Pinc @ 2023-09-24 20:49 UTC (permalink / raw)
The current section title of "Executing a Command with a Single-Row
Result" does not reflect what the section is really about. Other
sections make clear how to _execute_ commands, single-row result or not.
What this section is about is how to _save_ a single row of results into
variable(s).
It would be nice to talk about saving results into variables in the
section heading but I couldn't come up with anything pithy. "Saving a
Single-Row of a Command's Result" seems good enough, especially since
there's few other places to save results other than in variables.
---
doc/src/sgml/plpgsql.sgml | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/doc/src/sgml/plpgsql.sgml b/doc/src/sgml/plpgsql.sgml
index f55e901c7e..8747e84245 100644
--- a/doc/src/sgml/plpgsql.sgml
+++ b/doc/src/sgml/plpgsql.sgml
@@ -1126,7 +1126,7 @@ PERFORM create_mv('cs_session_page_requests_mv', my_query);
</sect2>
<sect2 id="plpgsql-statements-sql-onerow">
- <title>Executing a Command with a Single-Row Result</title>
+ <title>Saving a Single-Row of a Command's Result</title>
<indexterm zone="plpgsql-statements-sql-onerow">
<primary>SELECT INTO</primary>
--
2.30.2
--MP_/OOXZvOwbpccKfGOtE9/SwX6
Content-Type: text/x-patch
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
filename=v4-0002-Change-section-heading-to-better-describe-referen.patch
^ permalink raw reply [nested|flat] 56+ messages in thread
* [PATCH v4 01/12] Change section heading to better reflect saving a result in variable(s)
@ 2023-09-24 20:49 Karl O. Pinc <[email protected]>
0 siblings, 0 replies; 56+ messages in thread
From: Karl O. Pinc @ 2023-09-24 20:49 UTC (permalink / raw)
The current section title of "Executing a Command with a Single-Row
Result" does not reflect what the section is really about. Other
sections make clear how to _execute_ commands, single-row result or not.
What this section is about is how to _save_ a single row of results into
variable(s).
It would be nice to talk about saving results into variables in the
section heading but I couldn't come up with anything pithy. "Saving a
Single-Row of a Command's Result" seems good enough, especially since
there's few other places to save results other than in variables.
---
doc/src/sgml/plpgsql.sgml | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/doc/src/sgml/plpgsql.sgml b/doc/src/sgml/plpgsql.sgml
index f55e901c7e..8747e84245 100644
--- a/doc/src/sgml/plpgsql.sgml
+++ b/doc/src/sgml/plpgsql.sgml
@@ -1126,7 +1126,7 @@ PERFORM create_mv('cs_session_page_requests_mv', my_query);
</sect2>
<sect2 id="plpgsql-statements-sql-onerow">
- <title>Executing a Command with a Single-Row Result</title>
+ <title>Saving a Single-Row of a Command's Result</title>
<indexterm zone="plpgsql-statements-sql-onerow">
<primary>SELECT INTO</primary>
--
2.30.2
--MP_/OOXZvOwbpccKfGOtE9/SwX6
Content-Type: text/x-patch
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
filename=v4-0002-Change-section-heading-to-better-describe-referen.patch
^ permalink raw reply [nested|flat] 56+ messages in thread
* [PATCH v4 01/12] Change section heading to better reflect saving a result in variable(s)
@ 2023-09-24 20:49 Karl O. Pinc <[email protected]>
0 siblings, 0 replies; 56+ messages in thread
From: Karl O. Pinc @ 2023-09-24 20:49 UTC (permalink / raw)
The current section title of "Executing a Command with a Single-Row
Result" does not reflect what the section is really about. Other
sections make clear how to _execute_ commands, single-row result or not.
What this section is about is how to _save_ a single row of results into
variable(s).
It would be nice to talk about saving results into variables in the
section heading but I couldn't come up with anything pithy. "Saving a
Single-Row of a Command's Result" seems good enough, especially since
there's few other places to save results other than in variables.
---
doc/src/sgml/plpgsql.sgml | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/doc/src/sgml/plpgsql.sgml b/doc/src/sgml/plpgsql.sgml
index f55e901c7e..8747e84245 100644
--- a/doc/src/sgml/plpgsql.sgml
+++ b/doc/src/sgml/plpgsql.sgml
@@ -1126,7 +1126,7 @@ PERFORM create_mv('cs_session_page_requests_mv', my_query);
</sect2>
<sect2 id="plpgsql-statements-sql-onerow">
- <title>Executing a Command with a Single-Row Result</title>
+ <title>Saving a Single-Row of a Command's Result</title>
<indexterm zone="plpgsql-statements-sql-onerow">
<primary>SELECT INTO</primary>
--
2.30.2
--MP_/OOXZvOwbpccKfGOtE9/SwX6
Content-Type: text/x-patch
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
filename=v4-0002-Change-section-heading-to-better-describe-referen.patch
^ permalink raw reply [nested|flat] 56+ messages in thread
* [PATCH v4 01/12] Change section heading to better reflect saving a result in variable(s)
@ 2023-09-24 20:49 Karl O. Pinc <[email protected]>
0 siblings, 0 replies; 56+ messages in thread
From: Karl O. Pinc @ 2023-09-24 20:49 UTC (permalink / raw)
The current section title of "Executing a Command with a Single-Row
Result" does not reflect what the section is really about. Other
sections make clear how to _execute_ commands, single-row result or not.
What this section is about is how to _save_ a single row of results into
variable(s).
It would be nice to talk about saving results into variables in the
section heading but I couldn't come up with anything pithy. "Saving a
Single-Row of a Command's Result" seems good enough, especially since
there's few other places to save results other than in variables.
---
doc/src/sgml/plpgsql.sgml | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/doc/src/sgml/plpgsql.sgml b/doc/src/sgml/plpgsql.sgml
index f55e901c7e..8747e84245 100644
--- a/doc/src/sgml/plpgsql.sgml
+++ b/doc/src/sgml/plpgsql.sgml
@@ -1126,7 +1126,7 @@ PERFORM create_mv('cs_session_page_requests_mv', my_query);
</sect2>
<sect2 id="plpgsql-statements-sql-onerow">
- <title>Executing a Command with a Single-Row Result</title>
+ <title>Saving a Single-Row of a Command's Result</title>
<indexterm zone="plpgsql-statements-sql-onerow">
<primary>SELECT INTO</primary>
--
2.30.2
--MP_/OOXZvOwbpccKfGOtE9/SwX6
Content-Type: text/x-patch
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
filename=v4-0002-Change-section-heading-to-better-describe-referen.patch
^ permalink raw reply [nested|flat] 56+ messages in thread
* [PATCH v4 01/12] Change section heading to better reflect saving a result in variable(s)
@ 2023-09-24 20:49 Karl O. Pinc <[email protected]>
0 siblings, 0 replies; 56+ messages in thread
From: Karl O. Pinc @ 2023-09-24 20:49 UTC (permalink / raw)
The current section title of "Executing a Command with a Single-Row
Result" does not reflect what the section is really about. Other
sections make clear how to _execute_ commands, single-row result or not.
What this section is about is how to _save_ a single row of results into
variable(s).
It would be nice to talk about saving results into variables in the
section heading but I couldn't come up with anything pithy. "Saving a
Single-Row of a Command's Result" seems good enough, especially since
there's few other places to save results other than in variables.
---
doc/src/sgml/plpgsql.sgml | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/doc/src/sgml/plpgsql.sgml b/doc/src/sgml/plpgsql.sgml
index f55e901c7e..8747e84245 100644
--- a/doc/src/sgml/plpgsql.sgml
+++ b/doc/src/sgml/plpgsql.sgml
@@ -1126,7 +1126,7 @@ PERFORM create_mv('cs_session_page_requests_mv', my_query);
</sect2>
<sect2 id="plpgsql-statements-sql-onerow">
- <title>Executing a Command with a Single-Row Result</title>
+ <title>Saving a Single-Row of a Command's Result</title>
<indexterm zone="plpgsql-statements-sql-onerow">
<primary>SELECT INTO</primary>
--
2.30.2
--MP_/OOXZvOwbpccKfGOtE9/SwX6
Content-Type: text/x-patch
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
filename=v4-0002-Change-section-heading-to-better-describe-referen.patch
^ permalink raw reply [nested|flat] 56+ messages in thread
* [PATCH v4 01/12] Change section heading to better reflect saving a result in variable(s)
@ 2023-09-24 20:49 Karl O. Pinc <[email protected]>
0 siblings, 0 replies; 56+ messages in thread
From: Karl O. Pinc @ 2023-09-24 20:49 UTC (permalink / raw)
The current section title of "Executing a Command with a Single-Row
Result" does not reflect what the section is really about. Other
sections make clear how to _execute_ commands, single-row result or not.
What this section is about is how to _save_ a single row of results into
variable(s).
It would be nice to talk about saving results into variables in the
section heading but I couldn't come up with anything pithy. "Saving a
Single-Row of a Command's Result" seems good enough, especially since
there's few other places to save results other than in variables.
---
doc/src/sgml/plpgsql.sgml | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/doc/src/sgml/plpgsql.sgml b/doc/src/sgml/plpgsql.sgml
index f55e901c7e..8747e84245 100644
--- a/doc/src/sgml/plpgsql.sgml
+++ b/doc/src/sgml/plpgsql.sgml
@@ -1126,7 +1126,7 @@ PERFORM create_mv('cs_session_page_requests_mv', my_query);
</sect2>
<sect2 id="plpgsql-statements-sql-onerow">
- <title>Executing a Command with a Single-Row Result</title>
+ <title>Saving a Single-Row of a Command's Result</title>
<indexterm zone="plpgsql-statements-sql-onerow">
<primary>SELECT INTO</primary>
--
2.30.2
--MP_/OOXZvOwbpccKfGOtE9/SwX6
Content-Type: text/x-patch
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
filename=v4-0002-Change-section-heading-to-better-describe-referen.patch
^ permalink raw reply [nested|flat] 56+ messages in thread
* [PATCH v4 01/12] Change section heading to better reflect saving a result in variable(s)
@ 2023-09-24 20:49 Karl O. Pinc <[email protected]>
0 siblings, 0 replies; 56+ messages in thread
From: Karl O. Pinc @ 2023-09-24 20:49 UTC (permalink / raw)
The current section title of "Executing a Command with a Single-Row
Result" does not reflect what the section is really about. Other
sections make clear how to _execute_ commands, single-row result or not.
What this section is about is how to _save_ a single row of results into
variable(s).
It would be nice to talk about saving results into variables in the
section heading but I couldn't come up with anything pithy. "Saving a
Single-Row of a Command's Result" seems good enough, especially since
there's few other places to save results other than in variables.
---
doc/src/sgml/plpgsql.sgml | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/doc/src/sgml/plpgsql.sgml b/doc/src/sgml/plpgsql.sgml
index f55e901c7e..8747e84245 100644
--- a/doc/src/sgml/plpgsql.sgml
+++ b/doc/src/sgml/plpgsql.sgml
@@ -1126,7 +1126,7 @@ PERFORM create_mv('cs_session_page_requests_mv', my_query);
</sect2>
<sect2 id="plpgsql-statements-sql-onerow">
- <title>Executing a Command with a Single-Row Result</title>
+ <title>Saving a Single-Row of a Command's Result</title>
<indexterm zone="plpgsql-statements-sql-onerow">
<primary>SELECT INTO</primary>
--
2.30.2
--MP_/OOXZvOwbpccKfGOtE9/SwX6
Content-Type: text/x-patch
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
filename=v4-0002-Change-section-heading-to-better-describe-referen.patch
^ permalink raw reply [nested|flat] 56+ messages in thread
* [PATCH v4 01/12] Change section heading to better reflect saving a result in variable(s)
@ 2023-09-24 20:49 Karl O. Pinc <[email protected]>
0 siblings, 0 replies; 56+ messages in thread
From: Karl O. Pinc @ 2023-09-24 20:49 UTC (permalink / raw)
The current section title of "Executing a Command with a Single-Row
Result" does not reflect what the section is really about. Other
sections make clear how to _execute_ commands, single-row result or not.
What this section is about is how to _save_ a single row of results into
variable(s).
It would be nice to talk about saving results into variables in the
section heading but I couldn't come up with anything pithy. "Saving a
Single-Row of a Command's Result" seems good enough, especially since
there's few other places to save results other than in variables.
---
doc/src/sgml/plpgsql.sgml | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/doc/src/sgml/plpgsql.sgml b/doc/src/sgml/plpgsql.sgml
index f55e901c7e..8747e84245 100644
--- a/doc/src/sgml/plpgsql.sgml
+++ b/doc/src/sgml/plpgsql.sgml
@@ -1126,7 +1126,7 @@ PERFORM create_mv('cs_session_page_requests_mv', my_query);
</sect2>
<sect2 id="plpgsql-statements-sql-onerow">
- <title>Executing a Command with a Single-Row Result</title>
+ <title>Saving a Single-Row of a Command's Result</title>
<indexterm zone="plpgsql-statements-sql-onerow">
<primary>SELECT INTO</primary>
--
2.30.2
--MP_/OOXZvOwbpccKfGOtE9/SwX6
Content-Type: text/x-patch
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
filename=v4-0002-Change-section-heading-to-better-describe-referen.patch
^ permalink raw reply [nested|flat] 56+ messages in thread
* [PATCH v4 01/12] Change section heading to better reflect saving a result in variable(s)
@ 2023-09-24 20:49 Karl O. Pinc <[email protected]>
0 siblings, 0 replies; 56+ messages in thread
From: Karl O. Pinc @ 2023-09-24 20:49 UTC (permalink / raw)
The current section title of "Executing a Command with a Single-Row
Result" does not reflect what the section is really about. Other
sections make clear how to _execute_ commands, single-row result or not.
What this section is about is how to _save_ a single row of results into
variable(s).
It would be nice to talk about saving results into variables in the
section heading but I couldn't come up with anything pithy. "Saving a
Single-Row of a Command's Result" seems good enough, especially since
there's few other places to save results other than in variables.
---
doc/src/sgml/plpgsql.sgml | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/doc/src/sgml/plpgsql.sgml b/doc/src/sgml/plpgsql.sgml
index f55e901c7e..8747e84245 100644
--- a/doc/src/sgml/plpgsql.sgml
+++ b/doc/src/sgml/plpgsql.sgml
@@ -1126,7 +1126,7 @@ PERFORM create_mv('cs_session_page_requests_mv', my_query);
</sect2>
<sect2 id="plpgsql-statements-sql-onerow">
- <title>Executing a Command with a Single-Row Result</title>
+ <title>Saving a Single-Row of a Command's Result</title>
<indexterm zone="plpgsql-statements-sql-onerow">
<primary>SELECT INTO</primary>
--
2.30.2
--MP_/OOXZvOwbpccKfGOtE9/SwX6
Content-Type: text/x-patch
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
filename=v4-0002-Change-section-heading-to-better-describe-referen.patch
^ permalink raw reply [nested|flat] 56+ messages in thread
* [PATCH v4 01/12] Change section heading to better reflect saving a result in variable(s)
@ 2023-09-24 20:49 Karl O. Pinc <[email protected]>
0 siblings, 0 replies; 56+ messages in thread
From: Karl O. Pinc @ 2023-09-24 20:49 UTC (permalink / raw)
The current section title of "Executing a Command with a Single-Row
Result" does not reflect what the section is really about. Other
sections make clear how to _execute_ commands, single-row result or not.
What this section is about is how to _save_ a single row of results into
variable(s).
It would be nice to talk about saving results into variables in the
section heading but I couldn't come up with anything pithy. "Saving a
Single-Row of a Command's Result" seems good enough, especially since
there's few other places to save results other than in variables.
---
doc/src/sgml/plpgsql.sgml | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/doc/src/sgml/plpgsql.sgml b/doc/src/sgml/plpgsql.sgml
index f55e901c7e..8747e84245 100644
--- a/doc/src/sgml/plpgsql.sgml
+++ b/doc/src/sgml/plpgsql.sgml
@@ -1126,7 +1126,7 @@ PERFORM create_mv('cs_session_page_requests_mv', my_query);
</sect2>
<sect2 id="plpgsql-statements-sql-onerow">
- <title>Executing a Command with a Single-Row Result</title>
+ <title>Saving a Single-Row of a Command's Result</title>
<indexterm zone="plpgsql-statements-sql-onerow">
<primary>SELECT INTO</primary>
--
2.30.2
--MP_/OOXZvOwbpccKfGOtE9/SwX6
Content-Type: text/x-patch
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
filename=v4-0002-Change-section-heading-to-better-describe-referen.patch
^ permalink raw reply [nested|flat] 56+ messages in thread
* [PATCH v4 01/12] Change section heading to better reflect saving a result in variable(s)
@ 2023-09-24 20:49 Karl O. Pinc <[email protected]>
0 siblings, 0 replies; 56+ messages in thread
From: Karl O. Pinc @ 2023-09-24 20:49 UTC (permalink / raw)
The current section title of "Executing a Command with a Single-Row
Result" does not reflect what the section is really about. Other
sections make clear how to _execute_ commands, single-row result or not.
What this section is about is how to _save_ a single row of results into
variable(s).
It would be nice to talk about saving results into variables in the
section heading but I couldn't come up with anything pithy. "Saving a
Single-Row of a Command's Result" seems good enough, especially since
there's few other places to save results other than in variables.
---
doc/src/sgml/plpgsql.sgml | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/doc/src/sgml/plpgsql.sgml b/doc/src/sgml/plpgsql.sgml
index f55e901c7e..8747e84245 100644
--- a/doc/src/sgml/plpgsql.sgml
+++ b/doc/src/sgml/plpgsql.sgml
@@ -1126,7 +1126,7 @@ PERFORM create_mv('cs_session_page_requests_mv', my_query);
</sect2>
<sect2 id="plpgsql-statements-sql-onerow">
- <title>Executing a Command with a Single-Row Result</title>
+ <title>Saving a Single-Row of a Command's Result</title>
<indexterm zone="plpgsql-statements-sql-onerow">
<primary>SELECT INTO</primary>
--
2.30.2
--MP_/OOXZvOwbpccKfGOtE9/SwX6
Content-Type: text/x-patch
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
filename=v4-0002-Change-section-heading-to-better-describe-referen.patch
^ permalink raw reply [nested|flat] 56+ messages in thread
* [PATCH v4 01/12] Change section heading to better reflect saving a result in variable(s)
@ 2023-09-24 20:49 Karl O. Pinc <[email protected]>
0 siblings, 0 replies; 56+ messages in thread
From: Karl O. Pinc @ 2023-09-24 20:49 UTC (permalink / raw)
The current section title of "Executing a Command with a Single-Row
Result" does not reflect what the section is really about. Other
sections make clear how to _execute_ commands, single-row result or not.
What this section is about is how to _save_ a single row of results into
variable(s).
It would be nice to talk about saving results into variables in the
section heading but I couldn't come up with anything pithy. "Saving a
Single-Row of a Command's Result" seems good enough, especially since
there's few other places to save results other than in variables.
---
doc/src/sgml/plpgsql.sgml | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/doc/src/sgml/plpgsql.sgml b/doc/src/sgml/plpgsql.sgml
index f55e901c7e..8747e84245 100644
--- a/doc/src/sgml/plpgsql.sgml
+++ b/doc/src/sgml/plpgsql.sgml
@@ -1126,7 +1126,7 @@ PERFORM create_mv('cs_session_page_requests_mv', my_query);
</sect2>
<sect2 id="plpgsql-statements-sql-onerow">
- <title>Executing a Command with a Single-Row Result</title>
+ <title>Saving a Single-Row of a Command's Result</title>
<indexterm zone="plpgsql-statements-sql-onerow">
<primary>SELECT INTO</primary>
--
2.30.2
--MP_/OOXZvOwbpccKfGOtE9/SwX6
Content-Type: text/x-patch
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
filename=v4-0002-Change-section-heading-to-better-describe-referen.patch
^ permalink raw reply [nested|flat] 56+ messages in thread
* [PATCH v4 01/12] Change section heading to better reflect saving a result in variable(s)
@ 2023-09-24 20:49 Karl O. Pinc <[email protected]>
0 siblings, 0 replies; 56+ messages in thread
From: Karl O. Pinc @ 2023-09-24 20:49 UTC (permalink / raw)
The current section title of "Executing a Command with a Single-Row
Result" does not reflect what the section is really about. Other
sections make clear how to _execute_ commands, single-row result or not.
What this section is about is how to _save_ a single row of results into
variable(s).
It would be nice to talk about saving results into variables in the
section heading but I couldn't come up with anything pithy. "Saving a
Single-Row of a Command's Result" seems good enough, especially since
there's few other places to save results other than in variables.
---
doc/src/sgml/plpgsql.sgml | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/doc/src/sgml/plpgsql.sgml b/doc/src/sgml/plpgsql.sgml
index f55e901c7e..8747e84245 100644
--- a/doc/src/sgml/plpgsql.sgml
+++ b/doc/src/sgml/plpgsql.sgml
@@ -1126,7 +1126,7 @@ PERFORM create_mv('cs_session_page_requests_mv', my_query);
</sect2>
<sect2 id="plpgsql-statements-sql-onerow">
- <title>Executing a Command with a Single-Row Result</title>
+ <title>Saving a Single-Row of a Command's Result</title>
<indexterm zone="plpgsql-statements-sql-onerow">
<primary>SELECT INTO</primary>
--
2.30.2
--MP_/OOXZvOwbpccKfGOtE9/SwX6
Content-Type: text/x-patch
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
filename=v4-0002-Change-section-heading-to-better-describe-referen.patch
^ permalink raw reply [nested|flat] 56+ messages in thread
* [PATCH v4 01/12] Change section heading to better reflect saving a result in variable(s)
@ 2023-09-24 20:49 Karl O. Pinc <[email protected]>
0 siblings, 0 replies; 56+ messages in thread
From: Karl O. Pinc @ 2023-09-24 20:49 UTC (permalink / raw)
The current section title of "Executing a Command with a Single-Row
Result" does not reflect what the section is really about. Other
sections make clear how to _execute_ commands, single-row result or not.
What this section is about is how to _save_ a single row of results into
variable(s).
It would be nice to talk about saving results into variables in the
section heading but I couldn't come up with anything pithy. "Saving a
Single-Row of a Command's Result" seems good enough, especially since
there's few other places to save results other than in variables.
---
doc/src/sgml/plpgsql.sgml | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/doc/src/sgml/plpgsql.sgml b/doc/src/sgml/plpgsql.sgml
index f55e901c7e..8747e84245 100644
--- a/doc/src/sgml/plpgsql.sgml
+++ b/doc/src/sgml/plpgsql.sgml
@@ -1126,7 +1126,7 @@ PERFORM create_mv('cs_session_page_requests_mv', my_query);
</sect2>
<sect2 id="plpgsql-statements-sql-onerow">
- <title>Executing a Command with a Single-Row Result</title>
+ <title>Saving a Single-Row of a Command's Result</title>
<indexterm zone="plpgsql-statements-sql-onerow">
<primary>SELECT INTO</primary>
--
2.30.2
--MP_/OOXZvOwbpccKfGOtE9/SwX6
Content-Type: text/x-patch
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
filename=v4-0002-Change-section-heading-to-better-describe-referen.patch
^ permalink raw reply [nested|flat] 56+ messages in thread
* [PATCH v4 01/12] Change section heading to better reflect saving a result in variable(s)
@ 2023-09-24 20:49 Karl O. Pinc <[email protected]>
0 siblings, 0 replies; 56+ messages in thread
From: Karl O. Pinc @ 2023-09-24 20:49 UTC (permalink / raw)
The current section title of "Executing a Command with a Single-Row
Result" does not reflect what the section is really about. Other
sections make clear how to _execute_ commands, single-row result or not.
What this section is about is how to _save_ a single row of results into
variable(s).
It would be nice to talk about saving results into variables in the
section heading but I couldn't come up with anything pithy. "Saving a
Single-Row of a Command's Result" seems good enough, especially since
there's few other places to save results other than in variables.
---
doc/src/sgml/plpgsql.sgml | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/doc/src/sgml/plpgsql.sgml b/doc/src/sgml/plpgsql.sgml
index f55e901c7e..8747e84245 100644
--- a/doc/src/sgml/plpgsql.sgml
+++ b/doc/src/sgml/plpgsql.sgml
@@ -1126,7 +1126,7 @@ PERFORM create_mv('cs_session_page_requests_mv', my_query);
</sect2>
<sect2 id="plpgsql-statements-sql-onerow">
- <title>Executing a Command with a Single-Row Result</title>
+ <title>Saving a Single-Row of a Command's Result</title>
<indexterm zone="plpgsql-statements-sql-onerow">
<primary>SELECT INTO</primary>
--
2.30.2
--MP_/OOXZvOwbpccKfGOtE9/SwX6
Content-Type: text/x-patch
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
filename=v4-0002-Change-section-heading-to-better-describe-referen.patch
^ permalink raw reply [nested|flat] 56+ messages in thread
* [PATCH v4 01/12] Change section heading to better reflect saving a result in variable(s)
@ 2023-09-24 20:49 Karl O. Pinc <[email protected]>
0 siblings, 0 replies; 56+ messages in thread
From: Karl O. Pinc @ 2023-09-24 20:49 UTC (permalink / raw)
The current section title of "Executing a Command with a Single-Row
Result" does not reflect what the section is really about. Other
sections make clear how to _execute_ commands, single-row result or not.
What this section is about is how to _save_ a single row of results into
variable(s).
It would be nice to talk about saving results into variables in the
section heading but I couldn't come up with anything pithy. "Saving a
Single-Row of a Command's Result" seems good enough, especially since
there's few other places to save results other than in variables.
---
doc/src/sgml/plpgsql.sgml | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/doc/src/sgml/plpgsql.sgml b/doc/src/sgml/plpgsql.sgml
index f55e901c7e..8747e84245 100644
--- a/doc/src/sgml/plpgsql.sgml
+++ b/doc/src/sgml/plpgsql.sgml
@@ -1126,7 +1126,7 @@ PERFORM create_mv('cs_session_page_requests_mv', my_query);
</sect2>
<sect2 id="plpgsql-statements-sql-onerow">
- <title>Executing a Command with a Single-Row Result</title>
+ <title>Saving a Single-Row of a Command's Result</title>
<indexterm zone="plpgsql-statements-sql-onerow">
<primary>SELECT INTO</primary>
--
2.30.2
--MP_/OOXZvOwbpccKfGOtE9/SwX6
Content-Type: text/x-patch
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
filename=v4-0002-Change-section-heading-to-better-describe-referen.patch
^ permalink raw reply [nested|flat] 56+ messages in thread
* [PATCH v4 01/12] Change section heading to better reflect saving a result in variable(s)
@ 2023-09-24 20:49 Karl O. Pinc <[email protected]>
0 siblings, 0 replies; 56+ messages in thread
From: Karl O. Pinc @ 2023-09-24 20:49 UTC (permalink / raw)
The current section title of "Executing a Command with a Single-Row
Result" does not reflect what the section is really about. Other
sections make clear how to _execute_ commands, single-row result or not.
What this section is about is how to _save_ a single row of results into
variable(s).
It would be nice to talk about saving results into variables in the
section heading but I couldn't come up with anything pithy. "Saving a
Single-Row of a Command's Result" seems good enough, especially since
there's few other places to save results other than in variables.
---
doc/src/sgml/plpgsql.sgml | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/doc/src/sgml/plpgsql.sgml b/doc/src/sgml/plpgsql.sgml
index f55e901c7e..8747e84245 100644
--- a/doc/src/sgml/plpgsql.sgml
+++ b/doc/src/sgml/plpgsql.sgml
@@ -1126,7 +1126,7 @@ PERFORM create_mv('cs_session_page_requests_mv', my_query);
</sect2>
<sect2 id="plpgsql-statements-sql-onerow">
- <title>Executing a Command with a Single-Row Result</title>
+ <title>Saving a Single-Row of a Command's Result</title>
<indexterm zone="plpgsql-statements-sql-onerow">
<primary>SELECT INTO</primary>
--
2.30.2
--MP_/OOXZvOwbpccKfGOtE9/SwX6
Content-Type: text/x-patch
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
filename=v4-0002-Change-section-heading-to-better-describe-referen.patch
^ permalink raw reply [nested|flat] 56+ messages in thread
* [PATCH v4 01/12] Change section heading to better reflect saving a result in variable(s)
@ 2023-09-24 20:49 Karl O. Pinc <[email protected]>
0 siblings, 0 replies; 56+ messages in thread
From: Karl O. Pinc @ 2023-09-24 20:49 UTC (permalink / raw)
The current section title of "Executing a Command with a Single-Row
Result" does not reflect what the section is really about. Other
sections make clear how to _execute_ commands, single-row result or not.
What this section is about is how to _save_ a single row of results into
variable(s).
It would be nice to talk about saving results into variables in the
section heading but I couldn't come up with anything pithy. "Saving a
Single-Row of a Command's Result" seems good enough, especially since
there's few other places to save results other than in variables.
---
doc/src/sgml/plpgsql.sgml | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/doc/src/sgml/plpgsql.sgml b/doc/src/sgml/plpgsql.sgml
index f55e901c7e..8747e84245 100644
--- a/doc/src/sgml/plpgsql.sgml
+++ b/doc/src/sgml/plpgsql.sgml
@@ -1126,7 +1126,7 @@ PERFORM create_mv('cs_session_page_requests_mv', my_query);
</sect2>
<sect2 id="plpgsql-statements-sql-onerow">
- <title>Executing a Command with a Single-Row Result</title>
+ <title>Saving a Single-Row of a Command's Result</title>
<indexterm zone="plpgsql-statements-sql-onerow">
<primary>SELECT INTO</primary>
--
2.30.2
--MP_/OOXZvOwbpccKfGOtE9/SwX6
Content-Type: text/x-patch
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
filename=v4-0002-Change-section-heading-to-better-describe-referen.patch
^ permalink raw reply [nested|flat] 56+ messages in thread
* [PATCH v4 01/12] Change section heading to better reflect saving a result in variable(s)
@ 2023-09-24 20:49 Karl O. Pinc <[email protected]>
0 siblings, 0 replies; 56+ messages in thread
From: Karl O. Pinc @ 2023-09-24 20:49 UTC (permalink / raw)
The current section title of "Executing a Command with a Single-Row
Result" does not reflect what the section is really about. Other
sections make clear how to _execute_ commands, single-row result or not.
What this section is about is how to _save_ a single row of results into
variable(s).
It would be nice to talk about saving results into variables in the
section heading but I couldn't come up with anything pithy. "Saving a
Single-Row of a Command's Result" seems good enough, especially since
there's few other places to save results other than in variables.
---
doc/src/sgml/plpgsql.sgml | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/doc/src/sgml/plpgsql.sgml b/doc/src/sgml/plpgsql.sgml
index f55e901c7e..8747e84245 100644
--- a/doc/src/sgml/plpgsql.sgml
+++ b/doc/src/sgml/plpgsql.sgml
@@ -1126,7 +1126,7 @@ PERFORM create_mv('cs_session_page_requests_mv', my_query);
</sect2>
<sect2 id="plpgsql-statements-sql-onerow">
- <title>Executing a Command with a Single-Row Result</title>
+ <title>Saving a Single-Row of a Command's Result</title>
<indexterm zone="plpgsql-statements-sql-onerow">
<primary>SELECT INTO</primary>
--
2.30.2
--MP_/OOXZvOwbpccKfGOtE9/SwX6
Content-Type: text/x-patch
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
filename=v4-0002-Change-section-heading-to-better-describe-referen.patch
^ permalink raw reply [nested|flat] 56+ messages in thread
* [PATCH v4 01/12] Change section heading to better reflect saving a result in variable(s)
@ 2023-09-24 20:49 Karl O. Pinc <[email protected]>
0 siblings, 0 replies; 56+ messages in thread
From: Karl O. Pinc @ 2023-09-24 20:49 UTC (permalink / raw)
The current section title of "Executing a Command with a Single-Row
Result" does not reflect what the section is really about. Other
sections make clear how to _execute_ commands, single-row result or not.
What this section is about is how to _save_ a single row of results into
variable(s).
It would be nice to talk about saving results into variables in the
section heading but I couldn't come up with anything pithy. "Saving a
Single-Row of a Command's Result" seems good enough, especially since
there's few other places to save results other than in variables.
---
doc/src/sgml/plpgsql.sgml | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/doc/src/sgml/plpgsql.sgml b/doc/src/sgml/plpgsql.sgml
index f55e901c7e..8747e84245 100644
--- a/doc/src/sgml/plpgsql.sgml
+++ b/doc/src/sgml/plpgsql.sgml
@@ -1126,7 +1126,7 @@ PERFORM create_mv('cs_session_page_requests_mv', my_query);
</sect2>
<sect2 id="plpgsql-statements-sql-onerow">
- <title>Executing a Command with a Single-Row Result</title>
+ <title>Saving a Single-Row of a Command's Result</title>
<indexterm zone="plpgsql-statements-sql-onerow">
<primary>SELECT INTO</primary>
--
2.30.2
--MP_/OOXZvOwbpccKfGOtE9/SwX6
Content-Type: text/x-patch
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
filename=v4-0002-Change-section-heading-to-better-describe-referen.patch
^ permalink raw reply [nested|flat] 56+ messages in thread
* [PATCH v4 01/12] Change section heading to better reflect saving a result in variable(s)
@ 2023-09-24 20:49 Karl O. Pinc <[email protected]>
0 siblings, 0 replies; 56+ messages in thread
From: Karl O. Pinc @ 2023-09-24 20:49 UTC (permalink / raw)
The current section title of "Executing a Command with a Single-Row
Result" does not reflect what the section is really about. Other
sections make clear how to _execute_ commands, single-row result or not.
What this section is about is how to _save_ a single row of results into
variable(s).
It would be nice to talk about saving results into variables in the
section heading but I couldn't come up with anything pithy. "Saving a
Single-Row of a Command's Result" seems good enough, especially since
there's few other places to save results other than in variables.
---
doc/src/sgml/plpgsql.sgml | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/doc/src/sgml/plpgsql.sgml b/doc/src/sgml/plpgsql.sgml
index f55e901c7e..8747e84245 100644
--- a/doc/src/sgml/plpgsql.sgml
+++ b/doc/src/sgml/plpgsql.sgml
@@ -1126,7 +1126,7 @@ PERFORM create_mv('cs_session_page_requests_mv', my_query);
</sect2>
<sect2 id="plpgsql-statements-sql-onerow">
- <title>Executing a Command with a Single-Row Result</title>
+ <title>Saving a Single-Row of a Command's Result</title>
<indexterm zone="plpgsql-statements-sql-onerow">
<primary>SELECT INTO</primary>
--
2.30.2
--MP_/OOXZvOwbpccKfGOtE9/SwX6
Content-Type: text/x-patch
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
filename=v4-0002-Change-section-heading-to-better-describe-referen.patch
^ permalink raw reply [nested|flat] 56+ messages in thread
* [PATCH v4 01/12] Change section heading to better reflect saving a result in variable(s)
@ 2023-09-24 20:49 Karl O. Pinc <[email protected]>
0 siblings, 0 replies; 56+ messages in thread
From: Karl O. Pinc @ 2023-09-24 20:49 UTC (permalink / raw)
The current section title of "Executing a Command with a Single-Row
Result" does not reflect what the section is really about. Other
sections make clear how to _execute_ commands, single-row result or not.
What this section is about is how to _save_ a single row of results into
variable(s).
It would be nice to talk about saving results into variables in the
section heading but I couldn't come up with anything pithy. "Saving a
Single-Row of a Command's Result" seems good enough, especially since
there's few other places to save results other than in variables.
---
doc/src/sgml/plpgsql.sgml | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/doc/src/sgml/plpgsql.sgml b/doc/src/sgml/plpgsql.sgml
index f55e901c7e..8747e84245 100644
--- a/doc/src/sgml/plpgsql.sgml
+++ b/doc/src/sgml/plpgsql.sgml
@@ -1126,7 +1126,7 @@ PERFORM create_mv('cs_session_page_requests_mv', my_query);
</sect2>
<sect2 id="plpgsql-statements-sql-onerow">
- <title>Executing a Command with a Single-Row Result</title>
+ <title>Saving a Single-Row of a Command's Result</title>
<indexterm zone="plpgsql-statements-sql-onerow">
<primary>SELECT INTO</primary>
--
2.30.2
--MP_/OOXZvOwbpccKfGOtE9/SwX6
Content-Type: text/x-patch
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
filename=v4-0002-Change-section-heading-to-better-describe-referen.patch
^ permalink raw reply [nested|flat] 56+ messages in thread
* [PATCH v4 01/12] Change section heading to better reflect saving a result in variable(s)
@ 2023-09-24 20:49 Karl O. Pinc <[email protected]>
0 siblings, 0 replies; 56+ messages in thread
From: Karl O. Pinc @ 2023-09-24 20:49 UTC (permalink / raw)
The current section title of "Executing a Command with a Single-Row
Result" does not reflect what the section is really about. Other
sections make clear how to _execute_ commands, single-row result or not.
What this section is about is how to _save_ a single row of results into
variable(s).
It would be nice to talk about saving results into variables in the
section heading but I couldn't come up with anything pithy. "Saving a
Single-Row of a Command's Result" seems good enough, especially since
there's few other places to save results other than in variables.
---
doc/src/sgml/plpgsql.sgml | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/doc/src/sgml/plpgsql.sgml b/doc/src/sgml/plpgsql.sgml
index f55e901c7e..8747e84245 100644
--- a/doc/src/sgml/plpgsql.sgml
+++ b/doc/src/sgml/plpgsql.sgml
@@ -1126,7 +1126,7 @@ PERFORM create_mv('cs_session_page_requests_mv', my_query);
</sect2>
<sect2 id="plpgsql-statements-sql-onerow">
- <title>Executing a Command with a Single-Row Result</title>
+ <title>Saving a Single-Row of a Command's Result</title>
<indexterm zone="plpgsql-statements-sql-onerow">
<primary>SELECT INTO</primary>
--
2.30.2
--MP_/OOXZvOwbpccKfGOtE9/SwX6
Content-Type: text/x-patch
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
filename=v4-0002-Change-section-heading-to-better-describe-referen.patch
^ permalink raw reply [nested|flat] 56+ messages in thread
* [PATCH v4 01/12] Change section heading to better reflect saving a result in variable(s)
@ 2023-09-24 20:49 Karl O. Pinc <[email protected]>
0 siblings, 0 replies; 56+ messages in thread
From: Karl O. Pinc @ 2023-09-24 20:49 UTC (permalink / raw)
The current section title of "Executing a Command with a Single-Row
Result" does not reflect what the section is really about. Other
sections make clear how to _execute_ commands, single-row result or not.
What this section is about is how to _save_ a single row of results into
variable(s).
It would be nice to talk about saving results into variables in the
section heading but I couldn't come up with anything pithy. "Saving a
Single-Row of a Command's Result" seems good enough, especially since
there's few other places to save results other than in variables.
---
doc/src/sgml/plpgsql.sgml | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/doc/src/sgml/plpgsql.sgml b/doc/src/sgml/plpgsql.sgml
index f55e901c7e..8747e84245 100644
--- a/doc/src/sgml/plpgsql.sgml
+++ b/doc/src/sgml/plpgsql.sgml
@@ -1126,7 +1126,7 @@ PERFORM create_mv('cs_session_page_requests_mv', my_query);
</sect2>
<sect2 id="plpgsql-statements-sql-onerow">
- <title>Executing a Command with a Single-Row Result</title>
+ <title>Saving a Single-Row of a Command's Result</title>
<indexterm zone="plpgsql-statements-sql-onerow">
<primary>SELECT INTO</primary>
--
2.30.2
--MP_/OOXZvOwbpccKfGOtE9/SwX6
Content-Type: text/x-patch
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
filename=v4-0002-Change-section-heading-to-better-describe-referen.patch
^ permalink raw reply [nested|flat] 56+ messages in thread
* [PATCH v4 01/12] Change section heading to better reflect saving a result in variable(s)
@ 2023-09-24 20:49 Karl O. Pinc <[email protected]>
0 siblings, 0 replies; 56+ messages in thread
From: Karl O. Pinc @ 2023-09-24 20:49 UTC (permalink / raw)
The current section title of "Executing a Command with a Single-Row
Result" does not reflect what the section is really about. Other
sections make clear how to _execute_ commands, single-row result or not.
What this section is about is how to _save_ a single row of results into
variable(s).
It would be nice to talk about saving results into variables in the
section heading but I couldn't come up with anything pithy. "Saving a
Single-Row of a Command's Result" seems good enough, especially since
there's few other places to save results other than in variables.
---
doc/src/sgml/plpgsql.sgml | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/doc/src/sgml/plpgsql.sgml b/doc/src/sgml/plpgsql.sgml
index f55e901c7e..8747e84245 100644
--- a/doc/src/sgml/plpgsql.sgml
+++ b/doc/src/sgml/plpgsql.sgml
@@ -1126,7 +1126,7 @@ PERFORM create_mv('cs_session_page_requests_mv', my_query);
</sect2>
<sect2 id="plpgsql-statements-sql-onerow">
- <title>Executing a Command with a Single-Row Result</title>
+ <title>Saving a Single-Row of a Command's Result</title>
<indexterm zone="plpgsql-statements-sql-onerow">
<primary>SELECT INTO</primary>
--
2.30.2
--MP_/OOXZvOwbpccKfGOtE9/SwX6
Content-Type: text/x-patch
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
filename=v4-0002-Change-section-heading-to-better-describe-referen.patch
^ permalink raw reply [nested|flat] 56+ messages in thread
* [PATCH v4 01/12] Change section heading to better reflect saving a result in variable(s)
@ 2023-09-24 20:49 Karl O. Pinc <[email protected]>
0 siblings, 0 replies; 56+ messages in thread
From: Karl O. Pinc @ 2023-09-24 20:49 UTC (permalink / raw)
The current section title of "Executing a Command with a Single-Row
Result" does not reflect what the section is really about. Other
sections make clear how to _execute_ commands, single-row result or not.
What this section is about is how to _save_ a single row of results into
variable(s).
It would be nice to talk about saving results into variables in the
section heading but I couldn't come up with anything pithy. "Saving a
Single-Row of a Command's Result" seems good enough, especially since
there's few other places to save results other than in variables.
---
doc/src/sgml/plpgsql.sgml | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/doc/src/sgml/plpgsql.sgml b/doc/src/sgml/plpgsql.sgml
index f55e901c7e..8747e84245 100644
--- a/doc/src/sgml/plpgsql.sgml
+++ b/doc/src/sgml/plpgsql.sgml
@@ -1126,7 +1126,7 @@ PERFORM create_mv('cs_session_page_requests_mv', my_query);
</sect2>
<sect2 id="plpgsql-statements-sql-onerow">
- <title>Executing a Command with a Single-Row Result</title>
+ <title>Saving a Single-Row of a Command's Result</title>
<indexterm zone="plpgsql-statements-sql-onerow">
<primary>SELECT INTO</primary>
--
2.30.2
--MP_/OOXZvOwbpccKfGOtE9/SwX6
Content-Type: text/x-patch
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
filename=v4-0002-Change-section-heading-to-better-describe-referen.patch
^ permalink raw reply [nested|flat] 56+ messages in thread
* [PATCH v4 01/12] Change section heading to better reflect saving a result in variable(s)
@ 2023-09-24 20:49 Karl O. Pinc <[email protected]>
0 siblings, 0 replies; 56+ messages in thread
From: Karl O. Pinc @ 2023-09-24 20:49 UTC (permalink / raw)
The current section title of "Executing a Command with a Single-Row
Result" does not reflect what the section is really about. Other
sections make clear how to _execute_ commands, single-row result or not.
What this section is about is how to _save_ a single row of results into
variable(s).
It would be nice to talk about saving results into variables in the
section heading but I couldn't come up with anything pithy. "Saving a
Single-Row of a Command's Result" seems good enough, especially since
there's few other places to save results other than in variables.
---
doc/src/sgml/plpgsql.sgml | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/doc/src/sgml/plpgsql.sgml b/doc/src/sgml/plpgsql.sgml
index f55e901c7e..8747e84245 100644
--- a/doc/src/sgml/plpgsql.sgml
+++ b/doc/src/sgml/plpgsql.sgml
@@ -1126,7 +1126,7 @@ PERFORM create_mv('cs_session_page_requests_mv', my_query);
</sect2>
<sect2 id="plpgsql-statements-sql-onerow">
- <title>Executing a Command with a Single-Row Result</title>
+ <title>Saving a Single-Row of a Command's Result</title>
<indexterm zone="plpgsql-statements-sql-onerow">
<primary>SELECT INTO</primary>
--
2.30.2
--MP_/OOXZvOwbpccKfGOtE9/SwX6
Content-Type: text/x-patch
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
filename=v4-0002-Change-section-heading-to-better-describe-referen.patch
^ permalink raw reply [nested|flat] 56+ messages in thread
* [PATCH v4 01/12] Change section heading to better reflect saving a result in variable(s)
@ 2023-09-24 20:49 Karl O. Pinc <[email protected]>
0 siblings, 0 replies; 56+ messages in thread
From: Karl O. Pinc @ 2023-09-24 20:49 UTC (permalink / raw)
The current section title of "Executing a Command with a Single-Row
Result" does not reflect what the section is really about. Other
sections make clear how to _execute_ commands, single-row result or not.
What this section is about is how to _save_ a single row of results into
variable(s).
It would be nice to talk about saving results into variables in the
section heading but I couldn't come up with anything pithy. "Saving a
Single-Row of a Command's Result" seems good enough, especially since
there's few other places to save results other than in variables.
---
doc/src/sgml/plpgsql.sgml | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/doc/src/sgml/plpgsql.sgml b/doc/src/sgml/plpgsql.sgml
index f55e901c7e..8747e84245 100644
--- a/doc/src/sgml/plpgsql.sgml
+++ b/doc/src/sgml/plpgsql.sgml
@@ -1126,7 +1126,7 @@ PERFORM create_mv('cs_session_page_requests_mv', my_query);
</sect2>
<sect2 id="plpgsql-statements-sql-onerow">
- <title>Executing a Command with a Single-Row Result</title>
+ <title>Saving a Single-Row of a Command's Result</title>
<indexterm zone="plpgsql-statements-sql-onerow">
<primary>SELECT INTO</primary>
--
2.30.2
--MP_/OOXZvOwbpccKfGOtE9/SwX6
Content-Type: text/x-patch
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
filename=v4-0002-Change-section-heading-to-better-describe-referen.patch
^ permalink raw reply [nested|flat] 56+ messages in thread
* [PATCH v4 01/12] Change section heading to better reflect saving a result in variable(s)
@ 2023-09-24 20:49 Karl O. Pinc <[email protected]>
0 siblings, 0 replies; 56+ messages in thread
From: Karl O. Pinc @ 2023-09-24 20:49 UTC (permalink / raw)
The current section title of "Executing a Command with a Single-Row
Result" does not reflect what the section is really about. Other
sections make clear how to _execute_ commands, single-row result or not.
What this section is about is how to _save_ a single row of results into
variable(s).
It would be nice to talk about saving results into variables in the
section heading but I couldn't come up with anything pithy. "Saving a
Single-Row of a Command's Result" seems good enough, especially since
there's few other places to save results other than in variables.
---
doc/src/sgml/plpgsql.sgml | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/doc/src/sgml/plpgsql.sgml b/doc/src/sgml/plpgsql.sgml
index f55e901c7e..8747e84245 100644
--- a/doc/src/sgml/plpgsql.sgml
+++ b/doc/src/sgml/plpgsql.sgml
@@ -1126,7 +1126,7 @@ PERFORM create_mv('cs_session_page_requests_mv', my_query);
</sect2>
<sect2 id="plpgsql-statements-sql-onerow">
- <title>Executing a Command with a Single-Row Result</title>
+ <title>Saving a Single-Row of a Command's Result</title>
<indexterm zone="plpgsql-statements-sql-onerow">
<primary>SELECT INTO</primary>
--
2.30.2
--MP_/OOXZvOwbpccKfGOtE9/SwX6
Content-Type: text/x-patch
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
filename=v4-0002-Change-section-heading-to-better-describe-referen.patch
^ permalink raw reply [nested|flat] 56+ messages in thread
* [PATCH v4 01/12] Change section heading to better reflect saving a result in variable(s)
@ 2023-09-24 20:49 Karl O. Pinc <[email protected]>
0 siblings, 0 replies; 56+ messages in thread
From: Karl O. Pinc @ 2023-09-24 20:49 UTC (permalink / raw)
The current section title of "Executing a Command with a Single-Row
Result" does not reflect what the section is really about. Other
sections make clear how to _execute_ commands, single-row result or not.
What this section is about is how to _save_ a single row of results into
variable(s).
It would be nice to talk about saving results into variables in the
section heading but I couldn't come up with anything pithy. "Saving a
Single-Row of a Command's Result" seems good enough, especially since
there's few other places to save results other than in variables.
---
doc/src/sgml/plpgsql.sgml | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/doc/src/sgml/plpgsql.sgml b/doc/src/sgml/plpgsql.sgml
index f55e901c7e..8747e84245 100644
--- a/doc/src/sgml/plpgsql.sgml
+++ b/doc/src/sgml/plpgsql.sgml
@@ -1126,7 +1126,7 @@ PERFORM create_mv('cs_session_page_requests_mv', my_query);
</sect2>
<sect2 id="plpgsql-statements-sql-onerow">
- <title>Executing a Command with a Single-Row Result</title>
+ <title>Saving a Single-Row of a Command's Result</title>
<indexterm zone="plpgsql-statements-sql-onerow">
<primary>SELECT INTO</primary>
--
2.30.2
--MP_/OOXZvOwbpccKfGOtE9/SwX6
Content-Type: text/x-patch
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
filename=v4-0002-Change-section-heading-to-better-describe-referen.patch
^ permalink raw reply [nested|flat] 56+ messages in thread
* [PATCH v4 01/12] Change section heading to better reflect saving a result in variable(s)
@ 2023-09-24 20:49 Karl O. Pinc <[email protected]>
0 siblings, 0 replies; 56+ messages in thread
From: Karl O. Pinc @ 2023-09-24 20:49 UTC (permalink / raw)
The current section title of "Executing a Command with a Single-Row
Result" does not reflect what the section is really about. Other
sections make clear how to _execute_ commands, single-row result or not.
What this section is about is how to _save_ a single row of results into
variable(s).
It would be nice to talk about saving results into variables in the
section heading but I couldn't come up with anything pithy. "Saving a
Single-Row of a Command's Result" seems good enough, especially since
there's few other places to save results other than in variables.
---
doc/src/sgml/plpgsql.sgml | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/doc/src/sgml/plpgsql.sgml b/doc/src/sgml/plpgsql.sgml
index f55e901c7e..8747e84245 100644
--- a/doc/src/sgml/plpgsql.sgml
+++ b/doc/src/sgml/plpgsql.sgml
@@ -1126,7 +1126,7 @@ PERFORM create_mv('cs_session_page_requests_mv', my_query);
</sect2>
<sect2 id="plpgsql-statements-sql-onerow">
- <title>Executing a Command with a Single-Row Result</title>
+ <title>Saving a Single-Row of a Command's Result</title>
<indexterm zone="plpgsql-statements-sql-onerow">
<primary>SELECT INTO</primary>
--
2.30.2
--MP_/OOXZvOwbpccKfGOtE9/SwX6
Content-Type: text/x-patch
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
filename=v4-0002-Change-section-heading-to-better-describe-referen.patch
^ permalink raw reply [nested|flat] 56+ messages in thread
* [PATCH v4 01/12] Change section heading to better reflect saving a result in variable(s)
@ 2023-09-24 20:49 Karl O. Pinc <[email protected]>
0 siblings, 0 replies; 56+ messages in thread
From: Karl O. Pinc @ 2023-09-24 20:49 UTC (permalink / raw)
The current section title of "Executing a Command with a Single-Row
Result" does not reflect what the section is really about. Other
sections make clear how to _execute_ commands, single-row result or not.
What this section is about is how to _save_ a single row of results into
variable(s).
It would be nice to talk about saving results into variables in the
section heading but I couldn't come up with anything pithy. "Saving a
Single-Row of a Command's Result" seems good enough, especially since
there's few other places to save results other than in variables.
---
doc/src/sgml/plpgsql.sgml | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/doc/src/sgml/plpgsql.sgml b/doc/src/sgml/plpgsql.sgml
index f55e901c7e..8747e84245 100644
--- a/doc/src/sgml/plpgsql.sgml
+++ b/doc/src/sgml/plpgsql.sgml
@@ -1126,7 +1126,7 @@ PERFORM create_mv('cs_session_page_requests_mv', my_query);
</sect2>
<sect2 id="plpgsql-statements-sql-onerow">
- <title>Executing a Command with a Single-Row Result</title>
+ <title>Saving a Single-Row of a Command's Result</title>
<indexterm zone="plpgsql-statements-sql-onerow">
<primary>SELECT INTO</primary>
--
2.30.2
--MP_/OOXZvOwbpccKfGOtE9/SwX6
Content-Type: text/x-patch
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
filename=v4-0002-Change-section-heading-to-better-describe-referen.patch
^ permalink raw reply [nested|flat] 56+ messages in thread
* [PATCH v4 01/12] Change section heading to better reflect saving a result in variable(s)
@ 2023-09-24 20:49 Karl O. Pinc <[email protected]>
0 siblings, 0 replies; 56+ messages in thread
From: Karl O. Pinc @ 2023-09-24 20:49 UTC (permalink / raw)
The current section title of "Executing a Command with a Single-Row
Result" does not reflect what the section is really about. Other
sections make clear how to _execute_ commands, single-row result or not.
What this section is about is how to _save_ a single row of results into
variable(s).
It would be nice to talk about saving results into variables in the
section heading but I couldn't come up with anything pithy. "Saving a
Single-Row of a Command's Result" seems good enough, especially since
there's few other places to save results other than in variables.
---
doc/src/sgml/plpgsql.sgml | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/doc/src/sgml/plpgsql.sgml b/doc/src/sgml/plpgsql.sgml
index f55e901c7e..8747e84245 100644
--- a/doc/src/sgml/plpgsql.sgml
+++ b/doc/src/sgml/plpgsql.sgml
@@ -1126,7 +1126,7 @@ PERFORM create_mv('cs_session_page_requests_mv', my_query);
</sect2>
<sect2 id="plpgsql-statements-sql-onerow">
- <title>Executing a Command with a Single-Row Result</title>
+ <title>Saving a Single-Row of a Command's Result</title>
<indexterm zone="plpgsql-statements-sql-onerow">
<primary>SELECT INTO</primary>
--
2.30.2
--MP_/OOXZvOwbpccKfGOtE9/SwX6
Content-Type: text/x-patch
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
filename=v4-0002-Change-section-heading-to-better-describe-referen.patch
^ permalink raw reply [nested|flat] 56+ messages in thread
* [PATCH v4 01/12] Change section heading to better reflect saving a result in variable(s)
@ 2023-09-24 20:49 Karl O. Pinc <[email protected]>
0 siblings, 0 replies; 56+ messages in thread
From: Karl O. Pinc @ 2023-09-24 20:49 UTC (permalink / raw)
The current section title of "Executing a Command with a Single-Row
Result" does not reflect what the section is really about. Other
sections make clear how to _execute_ commands, single-row result or not.
What this section is about is how to _save_ a single row of results into
variable(s).
It would be nice to talk about saving results into variables in the
section heading but I couldn't come up with anything pithy. "Saving a
Single-Row of a Command's Result" seems good enough, especially since
there's few other places to save results other than in variables.
---
doc/src/sgml/plpgsql.sgml | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/doc/src/sgml/plpgsql.sgml b/doc/src/sgml/plpgsql.sgml
index f55e901c7e..8747e84245 100644
--- a/doc/src/sgml/plpgsql.sgml
+++ b/doc/src/sgml/plpgsql.sgml
@@ -1126,7 +1126,7 @@ PERFORM create_mv('cs_session_page_requests_mv', my_query);
</sect2>
<sect2 id="plpgsql-statements-sql-onerow">
- <title>Executing a Command with a Single-Row Result</title>
+ <title>Saving a Single-Row of a Command's Result</title>
<indexterm zone="plpgsql-statements-sql-onerow">
<primary>SELECT INTO</primary>
--
2.30.2
--MP_/OOXZvOwbpccKfGOtE9/SwX6
Content-Type: text/x-patch
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
filename=v4-0002-Change-section-heading-to-better-describe-referen.patch
^ permalink raw reply [nested|flat] 56+ messages in thread
* [PATCH v4 01/12] Change section heading to better reflect saving a result in variable(s)
@ 2023-09-24 20:49 Karl O. Pinc <[email protected]>
0 siblings, 0 replies; 56+ messages in thread
From: Karl O. Pinc @ 2023-09-24 20:49 UTC (permalink / raw)
The current section title of "Executing a Command with a Single-Row
Result" does not reflect what the section is really about. Other
sections make clear how to _execute_ commands, single-row result or not.
What this section is about is how to _save_ a single row of results into
variable(s).
It would be nice to talk about saving results into variables in the
section heading but I couldn't come up with anything pithy. "Saving a
Single-Row of a Command's Result" seems good enough, especially since
there's few other places to save results other than in variables.
---
doc/src/sgml/plpgsql.sgml | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/doc/src/sgml/plpgsql.sgml b/doc/src/sgml/plpgsql.sgml
index f55e901c7e..8747e84245 100644
--- a/doc/src/sgml/plpgsql.sgml
+++ b/doc/src/sgml/plpgsql.sgml
@@ -1126,7 +1126,7 @@ PERFORM create_mv('cs_session_page_requests_mv', my_query);
</sect2>
<sect2 id="plpgsql-statements-sql-onerow">
- <title>Executing a Command with a Single-Row Result</title>
+ <title>Saving a Single-Row of a Command's Result</title>
<indexterm zone="plpgsql-statements-sql-onerow">
<primary>SELECT INTO</primary>
--
2.30.2
--MP_/OOXZvOwbpccKfGOtE9/SwX6
Content-Type: text/x-patch
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
filename=v4-0002-Change-section-heading-to-better-describe-referen.patch
^ permalink raw reply [nested|flat] 56+ messages in thread
* [PATCH v4 01/12] Change section heading to better reflect saving a result in variable(s)
@ 2023-09-24 20:49 Karl O. Pinc <[email protected]>
0 siblings, 0 replies; 56+ messages in thread
From: Karl O. Pinc @ 2023-09-24 20:49 UTC (permalink / raw)
The current section title of "Executing a Command with a Single-Row
Result" does not reflect what the section is really about. Other
sections make clear how to _execute_ commands, single-row result or not.
What this section is about is how to _save_ a single row of results into
variable(s).
It would be nice to talk about saving results into variables in the
section heading but I couldn't come up with anything pithy. "Saving a
Single-Row of a Command's Result" seems good enough, especially since
there's few other places to save results other than in variables.
---
doc/src/sgml/plpgsql.sgml | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/doc/src/sgml/plpgsql.sgml b/doc/src/sgml/plpgsql.sgml
index f55e901c7e..8747e84245 100644
--- a/doc/src/sgml/plpgsql.sgml
+++ b/doc/src/sgml/plpgsql.sgml
@@ -1126,7 +1126,7 @@ PERFORM create_mv('cs_session_page_requests_mv', my_query);
</sect2>
<sect2 id="plpgsql-statements-sql-onerow">
- <title>Executing a Command with a Single-Row Result</title>
+ <title>Saving a Single-Row of a Command's Result</title>
<indexterm zone="plpgsql-statements-sql-onerow">
<primary>SELECT INTO</primary>
--
2.30.2
--MP_/OOXZvOwbpccKfGOtE9/SwX6
Content-Type: text/x-patch
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
filename=v4-0002-Change-section-heading-to-better-describe-referen.patch
^ permalink raw reply [nested|flat] 56+ messages in thread
* [PATCH v2 01/11] Change section heading to better reflect saving a result in variable(s)
@ 2023-09-24 20:49 Karl O. Pinc <[email protected]>
0 siblings, 0 replies; 56+ messages in thread
From: Karl O. Pinc @ 2023-09-24 20:49 UTC (permalink / raw)
The current section title of "Executing a Command with a Single-Row
Result" does not reflect what the section is really about. Other
sections make clear how to _execute_ commands, single-row result or not.
What this section is about is how to _save_ a single row of results into
variable(s).
It would be nice to talk about saving results into variables in the
section heading but I couldn't come up with anything pithy. "Saving a
Single-Row of a Command's Result" seems good enough, especially since
there's few other places to save results other than in variables.
---
doc/src/sgml/plpgsql.sgml | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/doc/src/sgml/plpgsql.sgml b/doc/src/sgml/plpgsql.sgml
index f55e901c7e..8747e84245 100644
--- a/doc/src/sgml/plpgsql.sgml
+++ b/doc/src/sgml/plpgsql.sgml
@@ -1126,7 +1126,7 @@ PERFORM create_mv('cs_session_page_requests_mv', my_query);
</sect2>
<sect2 id="plpgsql-statements-sql-onerow">
- <title>Executing a Command with a Single-Row Result</title>
+ <title>Saving a Single-Row of a Command's Result</title>
<indexterm zone="plpgsql-statements-sql-onerow">
<primary>SELECT INTO</primary>
--
2.30.2
--MP_/RgO6TscyR9fMvkEm1k5N=yu
Content-Type: text/x-patch
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
filename=v2-0002-Change-section-heading-to-better-describe-referen.patch
^ permalink raw reply [nested|flat] 56+ messages in thread
* [PATCH v4 01/12] Change section heading to better reflect saving a result in variable(s)
@ 2023-09-24 20:49 Karl O. Pinc <[email protected]>
0 siblings, 0 replies; 56+ messages in thread
From: Karl O. Pinc @ 2023-09-24 20:49 UTC (permalink / raw)
The current section title of "Executing a Command with a Single-Row
Result" does not reflect what the section is really about. Other
sections make clear how to _execute_ commands, single-row result or not.
What this section is about is how to _save_ a single row of results into
variable(s).
It would be nice to talk about saving results into variables in the
section heading but I couldn't come up with anything pithy. "Saving a
Single-Row of a Command's Result" seems good enough, especially since
there's few other places to save results other than in variables.
---
doc/src/sgml/plpgsql.sgml | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/doc/src/sgml/plpgsql.sgml b/doc/src/sgml/plpgsql.sgml
index f55e901c7e..8747e84245 100644
--- a/doc/src/sgml/plpgsql.sgml
+++ b/doc/src/sgml/plpgsql.sgml
@@ -1126,7 +1126,7 @@ PERFORM create_mv('cs_session_page_requests_mv', my_query);
</sect2>
<sect2 id="plpgsql-statements-sql-onerow">
- <title>Executing a Command with a Single-Row Result</title>
+ <title>Saving a Single-Row of a Command's Result</title>
<indexterm zone="plpgsql-statements-sql-onerow">
<primary>SELECT INTO</primary>
--
2.30.2
--MP_/OOXZvOwbpccKfGOtE9/SwX6
Content-Type: text/x-patch
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
filename=v4-0002-Change-section-heading-to-better-describe-referen.patch
^ permalink raw reply [nested|flat] 56+ messages in thread
* [PATCH v4 01/12] Change section heading to better reflect saving a result in variable(s)
@ 2023-09-24 20:49 Karl O. Pinc <[email protected]>
0 siblings, 0 replies; 56+ messages in thread
From: Karl O. Pinc @ 2023-09-24 20:49 UTC (permalink / raw)
The current section title of "Executing a Command with a Single-Row
Result" does not reflect what the section is really about. Other
sections make clear how to _execute_ commands, single-row result or not.
What this section is about is how to _save_ a single row of results into
variable(s).
It would be nice to talk about saving results into variables in the
section heading but I couldn't come up with anything pithy. "Saving a
Single-Row of a Command's Result" seems good enough, especially since
there's few other places to save results other than in variables.
---
doc/src/sgml/plpgsql.sgml | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/doc/src/sgml/plpgsql.sgml b/doc/src/sgml/plpgsql.sgml
index f55e901c7e..8747e84245 100644
--- a/doc/src/sgml/plpgsql.sgml
+++ b/doc/src/sgml/plpgsql.sgml
@@ -1126,7 +1126,7 @@ PERFORM create_mv('cs_session_page_requests_mv', my_query);
</sect2>
<sect2 id="plpgsql-statements-sql-onerow">
- <title>Executing a Command with a Single-Row Result</title>
+ <title>Saving a Single-Row of a Command's Result</title>
<indexterm zone="plpgsql-statements-sql-onerow">
<primary>SELECT INTO</primary>
--
2.30.2
--MP_/OOXZvOwbpccKfGOtE9/SwX6
Content-Type: text/x-patch
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
filename=v4-0002-Change-section-heading-to-better-describe-referen.patch
^ permalink raw reply [nested|flat] 56+ messages in thread
* [PATCH v4 01/12] Change section heading to better reflect saving a result in variable(s)
@ 2023-09-24 20:49 Karl O. Pinc <[email protected]>
0 siblings, 0 replies; 56+ messages in thread
From: Karl O. Pinc @ 2023-09-24 20:49 UTC (permalink / raw)
The current section title of "Executing a Command with a Single-Row
Result" does not reflect what the section is really about. Other
sections make clear how to _execute_ commands, single-row result or not.
What this section is about is how to _save_ a single row of results into
variable(s).
It would be nice to talk about saving results into variables in the
section heading but I couldn't come up with anything pithy. "Saving a
Single-Row of a Command's Result" seems good enough, especially since
there's few other places to save results other than in variables.
---
doc/src/sgml/plpgsql.sgml | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/doc/src/sgml/plpgsql.sgml b/doc/src/sgml/plpgsql.sgml
index f55e901c7e..8747e84245 100644
--- a/doc/src/sgml/plpgsql.sgml
+++ b/doc/src/sgml/plpgsql.sgml
@@ -1126,7 +1126,7 @@ PERFORM create_mv('cs_session_page_requests_mv', my_query);
</sect2>
<sect2 id="plpgsql-statements-sql-onerow">
- <title>Executing a Command with a Single-Row Result</title>
+ <title>Saving a Single-Row of a Command's Result</title>
<indexterm zone="plpgsql-statements-sql-onerow">
<primary>SELECT INTO</primary>
--
2.30.2
--MP_/OOXZvOwbpccKfGOtE9/SwX6
Content-Type: text/x-patch
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
filename=v4-0002-Change-section-heading-to-better-describe-referen.patch
^ permalink raw reply [nested|flat] 56+ messages in thread
* [PATCH v4 01/12] Change section heading to better reflect saving a result in variable(s)
@ 2023-09-24 20:49 Karl O. Pinc <[email protected]>
0 siblings, 0 replies; 56+ messages in thread
From: Karl O. Pinc @ 2023-09-24 20:49 UTC (permalink / raw)
The current section title of "Executing a Command with a Single-Row
Result" does not reflect what the section is really about. Other
sections make clear how to _execute_ commands, single-row result or not.
What this section is about is how to _save_ a single row of results into
variable(s).
It would be nice to talk about saving results into variables in the
section heading but I couldn't come up with anything pithy. "Saving a
Single-Row of a Command's Result" seems good enough, especially since
there's few other places to save results other than in variables.
---
doc/src/sgml/plpgsql.sgml | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/doc/src/sgml/plpgsql.sgml b/doc/src/sgml/plpgsql.sgml
index f55e901c7e..8747e84245 100644
--- a/doc/src/sgml/plpgsql.sgml
+++ b/doc/src/sgml/plpgsql.sgml
@@ -1126,7 +1126,7 @@ PERFORM create_mv('cs_session_page_requests_mv', my_query);
</sect2>
<sect2 id="plpgsql-statements-sql-onerow">
- <title>Executing a Command with a Single-Row Result</title>
+ <title>Saving a Single-Row of a Command's Result</title>
<indexterm zone="plpgsql-statements-sql-onerow">
<primary>SELECT INTO</primary>
--
2.30.2
--MP_/OOXZvOwbpccKfGOtE9/SwX6
Content-Type: text/x-patch
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
filename=v4-0002-Change-section-heading-to-better-describe-referen.patch
^ permalink raw reply [nested|flat] 56+ messages in thread
* [PATCH v4 01/12] Change section heading to better reflect saving a result in variable(s)
@ 2023-09-24 20:49 Karl O. Pinc <[email protected]>
0 siblings, 0 replies; 56+ messages in thread
From: Karl O. Pinc @ 2023-09-24 20:49 UTC (permalink / raw)
The current section title of "Executing a Command with a Single-Row
Result" does not reflect what the section is really about. Other
sections make clear how to _execute_ commands, single-row result or not.
What this section is about is how to _save_ a single row of results into
variable(s).
It would be nice to talk about saving results into variables in the
section heading but I couldn't come up with anything pithy. "Saving a
Single-Row of a Command's Result" seems good enough, especially since
there's few other places to save results other than in variables.
---
doc/src/sgml/plpgsql.sgml | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/doc/src/sgml/plpgsql.sgml b/doc/src/sgml/plpgsql.sgml
index f55e901c7e..8747e84245 100644
--- a/doc/src/sgml/plpgsql.sgml
+++ b/doc/src/sgml/plpgsql.sgml
@@ -1126,7 +1126,7 @@ PERFORM create_mv('cs_session_page_requests_mv', my_query);
</sect2>
<sect2 id="plpgsql-statements-sql-onerow">
- <title>Executing a Command with a Single-Row Result</title>
+ <title>Saving a Single-Row of a Command's Result</title>
<indexterm zone="plpgsql-statements-sql-onerow">
<primary>SELECT INTO</primary>
--
2.30.2
--MP_/OOXZvOwbpccKfGOtE9/SwX6
Content-Type: text/x-patch
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
filename=v4-0002-Change-section-heading-to-better-describe-referen.patch
^ permalink raw reply [nested|flat] 56+ messages in thread
* [PATCH v4 01/12] Change section heading to better reflect saving a result in variable(s)
@ 2023-09-24 20:49 Karl O. Pinc <[email protected]>
0 siblings, 0 replies; 56+ messages in thread
From: Karl O. Pinc @ 2023-09-24 20:49 UTC (permalink / raw)
The current section title of "Executing a Command with a Single-Row
Result" does not reflect what the section is really about. Other
sections make clear how to _execute_ commands, single-row result or not.
What this section is about is how to _save_ a single row of results into
variable(s).
It would be nice to talk about saving results into variables in the
section heading but I couldn't come up with anything pithy. "Saving a
Single-Row of a Command's Result" seems good enough, especially since
there's few other places to save results other than in variables.
---
doc/src/sgml/plpgsql.sgml | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/doc/src/sgml/plpgsql.sgml b/doc/src/sgml/plpgsql.sgml
index f55e901c7e..8747e84245 100644
--- a/doc/src/sgml/plpgsql.sgml
+++ b/doc/src/sgml/plpgsql.sgml
@@ -1126,7 +1126,7 @@ PERFORM create_mv('cs_session_page_requests_mv', my_query);
</sect2>
<sect2 id="plpgsql-statements-sql-onerow">
- <title>Executing a Command with a Single-Row Result</title>
+ <title>Saving a Single-Row of a Command's Result</title>
<indexterm zone="plpgsql-statements-sql-onerow">
<primary>SELECT INTO</primary>
--
2.30.2
--MP_/OOXZvOwbpccKfGOtE9/SwX6
Content-Type: text/x-patch
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
filename=v4-0002-Change-section-heading-to-better-describe-referen.patch
^ permalink raw reply [nested|flat] 56+ messages in thread
* [PATCH v2 01/11] Change section heading to better reflect saving a result in variable(s)
@ 2023-09-24 20:49 Karl O. Pinc <[email protected]>
0 siblings, 0 replies; 56+ messages in thread
From: Karl O. Pinc @ 2023-09-24 20:49 UTC (permalink / raw)
The current section title of "Executing a Command with a Single-Row
Result" does not reflect what the section is really about. Other
sections make clear how to _execute_ commands, single-row result or not.
What this section is about is how to _save_ a single row of results into
variable(s).
It would be nice to talk about saving results into variables in the
section heading but I couldn't come up with anything pithy. "Saving a
Single-Row of a Command's Result" seems good enough, especially since
there's few other places to save results other than in variables.
---
doc/src/sgml/plpgsql.sgml | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/doc/src/sgml/plpgsql.sgml b/doc/src/sgml/plpgsql.sgml
index f55e901c7e..8747e84245 100644
--- a/doc/src/sgml/plpgsql.sgml
+++ b/doc/src/sgml/plpgsql.sgml
@@ -1126,7 +1126,7 @@ PERFORM create_mv('cs_session_page_requests_mv', my_query);
</sect2>
<sect2 id="plpgsql-statements-sql-onerow">
- <title>Executing a Command with a Single-Row Result</title>
+ <title>Saving a Single-Row of a Command's Result</title>
<indexterm zone="plpgsql-statements-sql-onerow">
<primary>SELECT INTO</primary>
--
2.30.2
--MP_/RgO6TscyR9fMvkEm1k5N=yu
Content-Type: text/x-patch
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
filename=v2-0002-Change-section-heading-to-better-describe-referen.patch
^ permalink raw reply [nested|flat] 56+ messages in thread
* [PATCH v3 01/11] Change section heading to better reflect saving a result in variable(s)
@ 2023-09-24 20:49 Karl O. Pinc <[email protected]>
0 siblings, 0 replies; 56+ messages in thread
From: Karl O. Pinc @ 2023-09-24 20:49 UTC (permalink / raw)
The current section title of "Executing a Command with a Single-Row
Result" does not reflect what the section is really about. Other
sections make clear how to _execute_ commands, single-row result or not.
What this section is about is how to _save_ a single row of results into
variable(s).
It would be nice to talk about saving results into variables in the
section heading but I couldn't come up with anything pithy. "Saving a
Single-Row of a Command's Result" seems good enough, especially since
there's few other places to save results other than in variables.
---
doc/src/sgml/plpgsql.sgml | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/doc/src/sgml/plpgsql.sgml b/doc/src/sgml/plpgsql.sgml
index f55e901c7e..8747e84245 100644
--- a/doc/src/sgml/plpgsql.sgml
+++ b/doc/src/sgml/plpgsql.sgml
@@ -1126,7 +1126,7 @@ PERFORM create_mv('cs_session_page_requests_mv', my_query);
</sect2>
<sect2 id="plpgsql-statements-sql-onerow">
- <title>Executing a Command with a Single-Row Result</title>
+ <title>Saving a Single-Row of a Command's Result</title>
<indexterm zone="plpgsql-statements-sql-onerow">
<primary>SELECT INTO</primary>
--
2.30.2
--MP_/.arW0LC=Yi8JO9BRih4YlyS
Content-Type: text/x-patch
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
filename=v3-0002-Change-section-heading-to-better-describe-referen.patch
^ permalink raw reply [nested|flat] 56+ messages in thread
* [PATCH v4 01/12] Change section heading to better reflect saving a result in variable(s)
@ 2023-09-24 20:49 Karl O. Pinc <[email protected]>
0 siblings, 0 replies; 56+ messages in thread
From: Karl O. Pinc @ 2023-09-24 20:49 UTC (permalink / raw)
The current section title of "Executing a Command with a Single-Row
Result" does not reflect what the section is really about. Other
sections make clear how to _execute_ commands, single-row result or not.
What this section is about is how to _save_ a single row of results into
variable(s).
It would be nice to talk about saving results into variables in the
section heading but I couldn't come up with anything pithy. "Saving a
Single-Row of a Command's Result" seems good enough, especially since
there's few other places to save results other than in variables.
---
doc/src/sgml/plpgsql.sgml | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/doc/src/sgml/plpgsql.sgml b/doc/src/sgml/plpgsql.sgml
index f55e901c7e..8747e84245 100644
--- a/doc/src/sgml/plpgsql.sgml
+++ b/doc/src/sgml/plpgsql.sgml
@@ -1126,7 +1126,7 @@ PERFORM create_mv('cs_session_page_requests_mv', my_query);
</sect2>
<sect2 id="plpgsql-statements-sql-onerow">
- <title>Executing a Command with a Single-Row Result</title>
+ <title>Saving a Single-Row of a Command's Result</title>
<indexterm zone="plpgsql-statements-sql-onerow">
<primary>SELECT INTO</primary>
--
2.30.2
--MP_/OOXZvOwbpccKfGOtE9/SwX6
Content-Type: text/x-patch
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
filename=v4-0002-Change-section-heading-to-better-describe-referen.patch
^ permalink raw reply [nested|flat] 56+ messages in thread
* [PATCH v5 01/14] Change section heading to better reflect saving a result in variable(s)
@ 2023-09-24 20:49 Karl O. Pinc <[email protected]>
0 siblings, 0 replies; 56+ messages in thread
From: Karl O. Pinc @ 2023-09-24 20:49 UTC (permalink / raw)
The current section title of "Executing a Command with a Single-Row
Result" does not reflect what the section is really about. Other
sections make clear how to _execute_ commands, single-row result or not.
What this section is about is how to _save_ a single row of results into
variable(s).
It would be nice to talk about saving results into variables in the
section heading but I couldn't come up with anything pithy. "Saving a
Single-Row of a Command's Result" seems good enough, especially since
there's few other places to save results other than in variables.
---
doc/src/sgml/plpgsql.sgml | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/doc/src/sgml/plpgsql.sgml b/doc/src/sgml/plpgsql.sgml
index f55e901c7e..8747e84245 100644
--- a/doc/src/sgml/plpgsql.sgml
+++ b/doc/src/sgml/plpgsql.sgml
@@ -1126,7 +1126,7 @@ PERFORM create_mv('cs_session_page_requests_mv', my_query);
</sect2>
<sect2 id="plpgsql-statements-sql-onerow">
- <title>Executing a Command with a Single-Row Result</title>
+ <title>Saving a Single-Row of a Command's Result</title>
<indexterm zone="plpgsql-statements-sql-onerow">
<primary>SELECT INTO</primary>
--
2.30.2
--MP_//gBZFZYGWm7urqUgDbu6PSe
Content-Type: text/x-patch
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
filename=v5-0002-Change-section-heading-to-better-describe-referen.patch
^ permalink raw reply [nested|flat] 56+ messages in thread
* [PATCH v6 01/15] Change section heading to better reflect saving a result in variable(s)
@ 2023-09-24 20:49 Karl O. Pinc <[email protected]>
0 siblings, 0 replies; 56+ messages in thread
From: Karl O. Pinc @ 2023-09-24 20:49 UTC (permalink / raw)
The current section title of "Executing a Command with a Single-Row
Result" does not reflect what the section is really about. Other
sections make clear how to _execute_ commands, single-row result or not.
What this section is about is how to _save_ a single row of results into
variable(s).
It would be nice to talk about saving results into variables in the
section heading but I couldn't come up with anything pithy. "Saving a
Single-Row of a Command's Result" seems good enough, especially since
there's few other places to save results other than in variables.
---
doc/src/sgml/plpgsql.sgml | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/doc/src/sgml/plpgsql.sgml b/doc/src/sgml/plpgsql.sgml
index f55e901c7e..8747e84245 100644
--- a/doc/src/sgml/plpgsql.sgml
+++ b/doc/src/sgml/plpgsql.sgml
@@ -1126,7 +1126,7 @@ PERFORM create_mv('cs_session_page_requests_mv', my_query);
</sect2>
<sect2 id="plpgsql-statements-sql-onerow">
- <title>Executing a Command with a Single-Row Result</title>
+ <title>Saving a Single-Row of a Command's Result</title>
<indexterm zone="plpgsql-statements-sql-onerow">
<primary>SELECT INTO</primary>
--
2.30.2
--MP_/74urtnrsBSymuH7bJczNOGS
Content-Type: text/x-patch
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
filename=v6-0002-Change-section-heading-to-better-describe-referen.patch
^ permalink raw reply [nested|flat] 56+ messages in thread
* [PATCH v7 01/16] Change section heading to better reflect saving a result in variable(s)
@ 2023-09-24 20:49 Karl O. Pinc <[email protected]>
0 siblings, 0 replies; 56+ messages in thread
From: Karl O. Pinc @ 2023-09-24 20:49 UTC (permalink / raw)
The current section title of "Executing a Command with a Single-Row
Result" does not reflect what the section is really about. Other
sections make clear how to _execute_ commands, single-row result or not.
What this section is about is how to _save_ a single row of results into
variable(s).
It would be nice to talk about saving results into variables in the
section heading but I couldn't come up with anything pithy. "Saving a
Single-Row of a Command's Result" seems good enough, especially since
there's few other places to save results other than in variables.
---
doc/src/sgml/plpgsql.sgml | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/doc/src/sgml/plpgsql.sgml b/doc/src/sgml/plpgsql.sgml
index f55e901c7e..8747e84245 100644
--- a/doc/src/sgml/plpgsql.sgml
+++ b/doc/src/sgml/plpgsql.sgml
@@ -1126,7 +1126,7 @@ PERFORM create_mv('cs_session_page_requests_mv', my_query);
</sect2>
<sect2 id="plpgsql-statements-sql-onerow">
- <title>Executing a Command with a Single-Row Result</title>
+ <title>Saving a Single-Row of a Command's Result</title>
<indexterm zone="plpgsql-statements-sql-onerow">
<primary>SELECT INTO</primary>
--
2.30.2
--MP_/VSGM3xNEmY7iJyL2wuWRCjV
Content-Type: text/x-patch
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
filename=v7-0002-Change-section-heading-to-better-describe-referen.patch
^ permalink raw reply [nested|flat] 56+ messages in thread
* [PATCH v4 01/12] Change section heading to better reflect saving a result in variable(s)
@ 2023-09-24 20:49 Karl O. Pinc <[email protected]>
0 siblings, 0 replies; 56+ messages in thread
From: Karl O. Pinc @ 2023-09-24 20:49 UTC (permalink / raw)
The current section title of "Executing a Command with a Single-Row
Result" does not reflect what the section is really about. Other
sections make clear how to _execute_ commands, single-row result or not.
What this section is about is how to _save_ a single row of results into
variable(s).
It would be nice to talk about saving results into variables in the
section heading but I couldn't come up with anything pithy. "Saving a
Single-Row of a Command's Result" seems good enough, especially since
there's few other places to save results other than in variables.
---
doc/src/sgml/plpgsql.sgml | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/doc/src/sgml/plpgsql.sgml b/doc/src/sgml/plpgsql.sgml
index f55e901c7e..8747e84245 100644
--- a/doc/src/sgml/plpgsql.sgml
+++ b/doc/src/sgml/plpgsql.sgml
@@ -1126,7 +1126,7 @@ PERFORM create_mv('cs_session_page_requests_mv', my_query);
</sect2>
<sect2 id="plpgsql-statements-sql-onerow">
- <title>Executing a Command with a Single-Row Result</title>
+ <title>Saving a Single-Row of a Command's Result</title>
<indexterm zone="plpgsql-statements-sql-onerow">
<primary>SELECT INTO</primary>
--
2.30.2
--MP_/OOXZvOwbpccKfGOtE9/SwX6
Content-Type: text/x-patch
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
filename=v4-0002-Change-section-heading-to-better-describe-referen.patch
^ permalink raw reply [nested|flat] 56+ messages in thread
* [PATCH v54 2/5] Rename cluster.c/h -> repack.c/h
@ 2026-03-31 16:55 Álvaro Herrera <[email protected]>
0 siblings, 0 replies; 56+ messages in thread
From: Álvaro Herrera @ 2026-03-31 16:55 UTC (permalink / raw)
---
src/backend/commands/Makefile | 2 +-
src/backend/commands/matview.c | 2 +-
src/backend/commands/meson.build | 2 +-
src/backend/commands/{cluster.c => repack.c} | 6 +++---
src/backend/commands/tablecmds.c | 2 +-
src/backend/commands/vacuum.c | 6 +++---
src/backend/storage/ipc/procsignal.c | 1 +
src/backend/tcop/postgres.c | 1 +
src/backend/tcop/utility.c | 2 +-
src/include/commands/{cluster.h => repack.h} | 12 ++++++------
10 files changed, 19 insertions(+), 17 deletions(-)
rename src/backend/commands/{cluster.c => repack.c} (99%)
rename src/include/commands/{cluster.h => repack.h} (90%)
diff --git a/src/backend/commands/Makefile b/src/backend/commands/Makefile
index c10fdba2bbb..fe1bba3a9b9 100644
--- a/src/backend/commands/Makefile
+++ b/src/backend/commands/Makefile
@@ -18,7 +18,6 @@ OBJS = \
amcmds.o \
analyze.o \
async.o \
- cluster.o \
collationcmds.o \
comment.o \
constraint.o \
@@ -51,6 +50,7 @@ OBJS = \
proclang.o \
propgraphcmds.o \
publicationcmds.o \
+ repack.o \
schemacmds.o \
seclabel.o \
sequence.o \
diff --git a/src/backend/commands/matview.c b/src/backend/commands/matview.c
index d3be8939011..5db4fe75dce 100644
--- a/src/backend/commands/matview.c
+++ b/src/backend/commands/matview.c
@@ -24,8 +24,8 @@
#include "catalog/namespace.h"
#include "catalog/pg_am.h"
#include "catalog/pg_opclass.h"
-#include "commands/cluster.h"
#include "commands/matview.h"
+#include "commands/repack.h"
#include "commands/tablecmds.h"
#include "commands/tablespace.h"
#include "executor/executor.h"
diff --git a/src/backend/commands/meson.build b/src/backend/commands/meson.build
index 90c7e37a429..f624aae74af 100644
--- a/src/backend/commands/meson.build
+++ b/src/backend/commands/meson.build
@@ -6,7 +6,6 @@ backend_sources += files(
'amcmds.c',
'analyze.c',
'async.c',
- 'cluster.c',
'collationcmds.c',
'comment.c',
'constraint.c',
@@ -39,6 +38,7 @@ backend_sources += files(
'proclang.c',
'propgraphcmds.c',
'publicationcmds.c',
+ 'repack.c',
'schemacmds.c',
'seclabel.c',
'sequence.c',
diff --git a/src/backend/commands/cluster.c b/src/backend/commands/repack.c
similarity index 99%
rename from src/backend/commands/cluster.c
rename to src/backend/commands/repack.c
index f241e18b153..20f0a572236 100644
--- a/src/backend/commands/cluster.c
+++ b/src/backend/commands/repack.c
@@ -1,6 +1,6 @@
/*-------------------------------------------------------------------------
*
- * cluster.c
+ * repack.c
* REPACK a table; formerly known as CLUSTER. VACUUM FULL also uses
* parts of this code.
*
@@ -10,7 +10,7 @@
*
*
* IDENTIFICATION
- * src/backend/commands/cluster.c
+ * src/backend/commands/repack.c
*
*-------------------------------------------------------------------------
*/
@@ -33,9 +33,9 @@
#include "catalog/pg_am.h"
#include "catalog/pg_inherits.h"
#include "catalog/toasting.h"
-#include "commands/cluster.h"
#include "commands/defrem.h"
#include "commands/progress.h"
+#include "commands/repack.h"
#include "commands/tablecmds.h"
#include "commands/vacuum.h"
#include "miscadmin.h"
diff --git a/src/backend/commands/tablecmds.c b/src/backend/commands/tablecmds.c
index 0ce2e81f9c2..e2882a50b3b 100644
--- a/src/backend/commands/tablecmds.c
+++ b/src/backend/commands/tablecmds.c
@@ -57,10 +57,10 @@
#include "catalog/storage.h"
#include "catalog/storage_xlog.h"
#include "catalog/toasting.h"
-#include "commands/cluster.h"
#include "commands/comment.h"
#include "commands/defrem.h"
#include "commands/event_trigger.h"
+#include "commands/repack.h"
#include "commands/sequence.h"
#include "commands/tablecmds.h"
#include "commands/tablespace.h"
diff --git a/src/backend/commands/vacuum.c b/src/backend/commands/vacuum.c
index 0ed363d1c85..b179b62b5c8 100644
--- a/src/backend/commands/vacuum.c
+++ b/src/backend/commands/vacuum.c
@@ -9,7 +9,7 @@
*
* VACUUM for heap AM is implemented in vacuumlazy.c, parallel vacuum in
* vacuumparallel.c, ANALYZE in analyze.c, and VACUUM FULL is a variant of
- * CLUSTER, handled in cluster.c.
+ * REPACK, handled in repack.c.
*
*
* Portions Copyright (c) 1996-2026, PostgreSQL Global Development Group
@@ -38,9 +38,9 @@
#include "catalog/pg_database.h"
#include "catalog/pg_inherits.h"
#include "commands/async.h"
-#include "commands/cluster.h"
#include "commands/defrem.h"
#include "commands/progress.h"
+#include "commands/repack.h"
#include "commands/vacuum.h"
#include "miscadmin.h"
#include "nodes/makefuncs.h"
@@ -2293,7 +2293,7 @@ vacuum_rel(Oid relid, RangeVar *relation, VacuumParams params,
if ((params.options & VACOPT_VERBOSE) != 0)
cluster_params.options |= CLUOPT_VERBOSE;
- /* VACUUM FULL is a variant of REPACK; see cluster.c */
+ /* VACUUM FULL is a variant of REPACK; see repack.c */
cluster_rel(REPACK_COMMAND_VACUUMFULL, rel, InvalidOid,
&cluster_params);
/* cluster_rel closes the relation, but keeps lock */
diff --git a/src/backend/storage/ipc/procsignal.c b/src/backend/storage/ipc/procsignal.c
index f1ab3aa3fe0..02d28df1c6a 100644
--- a/src/backend/storage/ipc/procsignal.c
+++ b/src/backend/storage/ipc/procsignal.c
@@ -19,6 +19,7 @@
#include "access/parallel.h"
#include "commands/async.h"
+#include "commands/repack.h"
#include "miscadmin.h"
#include "pgstat.h"
#include "port/pg_bitutils.h"
diff --git a/src/backend/tcop/postgres.c b/src/backend/tcop/postgres.c
index 10be60011ad..9fbaa5c00f0 100644
--- a/src/backend/tcop/postgres.c
+++ b/src/backend/tcop/postgres.c
@@ -39,6 +39,7 @@
#include "commands/event_trigger.h"
#include "commands/explain_state.h"
#include "commands/prepare.h"
+#include "commands/repack.h"
#include "common/pg_prng.h"
#include "jit/jit.h"
#include "libpq/libpq.h"
diff --git a/src/backend/tcop/utility.c b/src/backend/tcop/utility.c
index 2b609bfc824..5f8c766c4be 100644
--- a/src/backend/tcop/utility.c
+++ b/src/backend/tcop/utility.c
@@ -26,7 +26,6 @@
#include "catalog/toasting.h"
#include "commands/alter.h"
#include "commands/async.h"
-#include "commands/cluster.h"
#include "commands/collationcmds.h"
#include "commands/comment.h"
#include "commands/conversioncmds.h"
@@ -46,6 +45,7 @@
#include "commands/proclang.h"
#include "commands/propgraphcmds.h"
#include "commands/publicationcmds.h"
+#include "commands/repack.h"
#include "commands/schemacmds.h"
#include "commands/seclabel.h"
#include "commands/sequence.h"
diff --git a/src/include/commands/cluster.h b/src/include/commands/repack.h
similarity index 90%
rename from src/include/commands/cluster.h
rename to src/include/commands/repack.h
index d6b62c747e8..85061158b0c 100644
--- a/src/include/commands/cluster.h
+++ b/src/include/commands/repack.h
@@ -1,17 +1,17 @@
/*-------------------------------------------------------------------------
*
- * cluster.h
- * header file for postgres cluster command stuff
+ * repack.h
+ * header file for the REPACK command
*
* Portions Copyright (c) 1996-2026, PostgreSQL Global Development Group
* Portions Copyright (c) 1994-5, Regents of the University of California
*
- * src/include/commands/cluster.h
+ * src/include/commands/repack.h
*
*-------------------------------------------------------------------------
*/
-#ifndef CLUSTER_H
-#define CLUSTER_H
+#ifndef REPACK_H
+#define REPACK_H
#include "nodes/parsenodes.h"
#include "parser/parse_node.h"
@@ -52,4 +52,4 @@ extern void finish_heap_swap(Oid OIDOldHeap, Oid OIDNewHeap,
MultiXactId cutoffMulti,
char newrelpersistence);
-#endif /* CLUSTER_H */
+#endif /* REPACK_H */
--
2.47.3
--cdhh4t7ukb6tnjoq
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
filename="v54-0003-Add-CONCURRENTLY-option-to-REPACK-command.patch"
^ permalink raw reply [nested|flat] 56+ messages in thread
end of thread, other threads:[~2026-03-31 16:55 UTC | newest]
Thread overview: 56+ messages (download: mbox mbox.gz follow: Atom feed)
-- links below jump to the message on this page --
2019-02-06 05:36 [PATCH 3/4] PoC add prune-by-number-of-entries feature Kyotaro Horiguchi <[email protected]>
2023-09-24 20:49 [PATCH v4 01/12] Change section heading to better reflect saving a result in variable(s) Karl O. Pinc <[email protected]>
2023-09-24 20:49 [PATCH v4 01/12] Change section heading to better reflect saving a result in variable(s) Karl O. Pinc <[email protected]>
2023-09-24 20:49 [PATCH v4 01/12] Change section heading to better reflect saving a result in variable(s) Karl O. Pinc <[email protected]>
2023-09-24 20:49 [PATCH v4 01/12] Change section heading to better reflect saving a result in variable(s) Karl O. Pinc <[email protected]>
2023-09-24 20:49 [PATCH v4 01/12] Change section heading to better reflect saving a result in variable(s) Karl O. Pinc <[email protected]>
2023-09-24 20:49 [PATCH v4 01/12] Change section heading to better reflect saving a result in variable(s) Karl O. Pinc <[email protected]>
2023-09-24 20:49 [PATCH v4 01/12] Change section heading to better reflect saving a result in variable(s) Karl O. Pinc <[email protected]>
2023-09-24 20:49 [PATCH v4 01/12] Change section heading to better reflect saving a result in variable(s) Karl O. Pinc <[email protected]>
2023-09-24 20:49 [PATCH v4 01/12] Change section heading to better reflect saving a result in variable(s) Karl O. Pinc <[email protected]>
2023-09-24 20:49 [PATCH v2 01/11] Change section heading to better reflect saving a result in variable(s) Karl O. Pinc <[email protected]>
2023-09-24 20:49 [PATCH v4 01/12] Change section heading to better reflect saving a result in variable(s) Karl O. Pinc <[email protected]>
2023-09-24 20:49 [PATCH v4 01/12] Change section heading to better reflect saving a result in variable(s) Karl O. Pinc <[email protected]>
2023-09-24 20:49 [PATCH v4 01/12] Change section heading to better reflect saving a result in variable(s) Karl O. Pinc <[email protected]>
2023-09-24 20:49 [PATCH v4 01/12] Change section heading to better reflect saving a result in variable(s) Karl O. Pinc <[email protected]>
2023-09-24 20:49 [PATCH v4 01/12] Change section heading to better reflect saving a result in variable(s) Karl O. Pinc <[email protected]>
2023-09-24 20:49 [PATCH v4 01/12] Change section heading to better reflect saving a result in variable(s) Karl O. Pinc <[email protected]>
2023-09-24 20:49 [PATCH v4 01/12] Change section heading to better reflect saving a result in variable(s) Karl O. Pinc <[email protected]>
2023-09-24 20:49 [PATCH v4 01/12] Change section heading to better reflect saving a result in variable(s) Karl O. Pinc <[email protected]>
2023-09-24 20:49 [PATCH v4 01/12] Change section heading to better reflect saving a result in variable(s) Karl O. Pinc <[email protected]>
2023-09-24 20:49 [PATCH v4 01/12] Change section heading to better reflect saving a result in variable(s) Karl O. Pinc <[email protected]>
2023-09-24 20:49 [PATCH v4 01/12] Change section heading to better reflect saving a result in variable(s) Karl O. Pinc <[email protected]>
2023-09-24 20:49 [PATCH v3 01/11] Change section heading to better reflect saving a result in variable(s) Karl O. Pinc <[email protected]>
2023-09-24 20:49 [PATCH v5 01/14] Change section heading to better reflect saving a result in variable(s) Karl O. Pinc <[email protected]>
2023-09-24 20:49 [PATCH v4 01/12] Change section heading to better reflect saving a result in variable(s) Karl O. Pinc <[email protected]>
2023-09-24 20:49 [PATCH v4 01/12] Change section heading to better reflect saving a result in variable(s) Karl O. Pinc <[email protected]>
2023-09-24 20:49 [PATCH v4 01/12] Change section heading to better reflect saving a result in variable(s) Karl O. Pinc <[email protected]>
2023-09-24 20:49 [PATCH v4 01/12] Change section heading to better reflect saving a result in variable(s) Karl O. Pinc <[email protected]>
2023-09-24 20:49 [PATCH v7 01/16] Change section heading to better reflect saving a result in variable(s) Karl O. Pinc <[email protected]>
2023-09-24 20:49 [PATCH v4 01/12] Change section heading to better reflect saving a result in variable(s) Karl O. Pinc <[email protected]>
2023-09-24 20:49 [PATCH v4 01/12] Change section heading to better reflect saving a result in variable(s) Karl O. Pinc <[email protected]>
2023-09-24 20:49 [PATCH v4 01/12] Change section heading to better reflect saving a result in variable(s) Karl O. Pinc <[email protected]>
2023-09-24 20:49 [PATCH v4 01/12] Change section heading to better reflect saving a result in variable(s) Karl O. Pinc <[email protected]>
2023-09-24 20:49 [PATCH v4 01/12] Change section heading to better reflect saving a result in variable(s) Karl O. Pinc <[email protected]>
2023-09-24 20:49 [PATCH v4 01/12] Change section heading to better reflect saving a result in variable(s) Karl O. Pinc <[email protected]>
2023-09-24 20:49 [PATCH v4 01/12] Change section heading to better reflect saving a result in variable(s) Karl O. Pinc <[email protected]>
2023-09-24 20:49 [PATCH v4 01/12] Change section heading to better reflect saving a result in variable(s) Karl O. Pinc <[email protected]>
2023-09-24 20:49 [PATCH v2 01/11] Change section heading to better reflect saving a result in variable(s) Karl O. Pinc <[email protected]>
2023-09-24 20:49 [PATCH v4 01/12] Change section heading to better reflect saving a result in variable(s) Karl O. Pinc <[email protected]>
2023-09-24 20:49 [PATCH v4 01/12] Change section heading to better reflect saving a result in variable(s) Karl O. Pinc <[email protected]>
2023-09-24 20:49 [PATCH v4 01/12] Change section heading to better reflect saving a result in variable(s) Karl O. Pinc <[email protected]>
2023-09-24 20:49 [PATCH v4 01/12] Change section heading to better reflect saving a result in variable(s) Karl O. Pinc <[email protected]>
2023-09-24 20:49 [PATCH v4 01/12] Change section heading to better reflect saving a result in variable(s) Karl O. Pinc <[email protected]>
2023-09-24 20:49 [PATCH v6 01/15] Change section heading to better reflect saving a result in variable(s) Karl O. Pinc <[email protected]>
2023-09-24 20:49 [PATCH v4 01/12] Change section heading to better reflect saving a result in variable(s) Karl O. Pinc <[email protected]>
2023-09-24 20:49 [PATCH v4 01/12] Change section heading to better reflect saving a result in variable(s) Karl O. Pinc <[email protected]>
2023-09-24 20:49 [PATCH v4 01/12] Change section heading to better reflect saving a result in variable(s) Karl O. Pinc <[email protected]>
2023-09-24 20:49 [PATCH v4 01/12] Change section heading to better reflect saving a result in variable(s) Karl O. Pinc <[email protected]>
2023-09-24 20:49 [PATCH v4 01/12] Change section heading to better reflect saving a result in variable(s) Karl O. Pinc <[email protected]>
2023-09-24 20:49 [PATCH v4 01/12] Change section heading to better reflect saving a result in variable(s) Karl O. Pinc <[email protected]>
2023-09-24 20:49 [PATCH v4 01/12] Change section heading to better reflect saving a result in variable(s) Karl O. Pinc <[email protected]>
2023-09-24 20:49 [PATCH v4 01/12] Change section heading to better reflect saving a result in variable(s) Karl O. Pinc <[email protected]>
2023-09-24 20:49 [PATCH v3 01/11] Change section heading to better reflect saving a result in variable(s) Karl O. Pinc <[email protected]>
2023-09-24 20:49 [PATCH v4 01/12] Change section heading to better reflect saving a result in variable(s) Karl O. Pinc <[email protected]>
2023-09-24 20:49 [PATCH v4 01/12] Change section heading to better reflect saving a result in variable(s) Karl O. Pinc <[email protected]>
2026-03-31 16:55 [PATCH v54 2/5] Rename cluster.c/h -> repack.c/h Álvaro Herrera <[email protected]>
This inbox is served by agora; see mirroring instructions
for how to clone and mirror all data and code used for this inbox