public inbox for [email protected]
help / color / mirror / Atom feedFrom: Nathan Bossart <[email protected]>
Subject: [PATCH v9 1/1] Allow recovery via loadable modules.
Date: Fri, 9 Dec 2022 19:40:54 -0800
This adds the restore_library parameter to allow archive recovery
via a loadable module, rather than running shell commands.
---
contrib/basic_archive/Makefile | 4 +-
contrib/basic_archive/basic_archive.c | 67 ++++++-
contrib/basic_archive/meson.build | 7 +-
contrib/basic_archive/t/001_restore.pl | 44 +++++
doc/src/sgml/archive-modules.sgml | 168 ++++++++++++++++--
doc/src/sgml/backup.sgml | 43 ++++-
doc/src/sgml/basic-archive.sgml | 33 ++--
doc/src/sgml/config.sgml | 54 +++++-
doc/src/sgml/high-availability.sgml | 23 ++-
src/backend/access/transam/shell_restore.c | 21 ++-
src/backend/access/transam/xlog.c | 13 +-
src/backend/access/transam/xlogarchive.c | 70 +++++++-
src/backend/access/transam/xlogrecovery.c | 26 ++-
src/backend/postmaster/checkpointer.c | 26 +++
src/backend/postmaster/pgarch.c | 7 +-
src/backend/postmaster/startup.c | 23 ++-
src/backend/utils/misc/guc.c | 14 ++
src/backend/utils/misc/guc_tables.c | 10 ++
src/backend/utils/misc/postgresql.conf.sample | 1 +
src/include/access/xlog_internal.h | 1 +
src/include/access/xlogarchive.h | 44 ++++-
src/include/access/xlogrecovery.h | 1 +
src/include/utils/guc.h | 2 +
23 files changed, 618 insertions(+), 84 deletions(-)
create mode 100644 contrib/basic_archive/t/001_restore.pl
diff --git a/contrib/basic_archive/Makefile b/contrib/basic_archive/Makefile
index 55d299d650..487dc563f3 100644
--- a/contrib/basic_archive/Makefile
+++ b/contrib/basic_archive/Makefile
@@ -1,7 +1,7 @@
# contrib/basic_archive/Makefile
MODULES = basic_archive
-PGFILEDESC = "basic_archive - basic archive module"
+PGFILEDESC = "basic_archive - basic archive and recovery module"
REGRESS = basic_archive
REGRESS_OPTS = --temp-config $(top_srcdir)/contrib/basic_archive/basic_archive.conf
@@ -9,6 +9,8 @@ REGRESS_OPTS = --temp-config $(top_srcdir)/contrib/basic_archive/basic_archive.c
# which typical installcheck users do not have (e.g. buildfarm clients).
NO_INSTALLCHECK = 1
+TAP_TESTS = 1
+
ifdef USE_PGXS
PG_CONFIG = pg_config
PGXS := $(shell $(PG_CONFIG) --pgxs)
diff --git a/contrib/basic_archive/basic_archive.c b/contrib/basic_archive/basic_archive.c
index 3d29711a31..225a9bd3d4 100644
--- a/contrib/basic_archive/basic_archive.c
+++ b/contrib/basic_archive/basic_archive.c
@@ -17,6 +17,11 @@
* a file is successfully archived and then the system crashes before
* a durable record of the success has been made.
*
+ * This file also demonstrates a basic restore library implementation that
+ * is roughly equivalent to the following shell command:
+ *
+ * cp /path/to/archivedir/%f %p
+ *
* Copyright (c) 2022-2023, PostgreSQL Global Development Group
*
* IDENTIFICATION
@@ -30,6 +35,7 @@
#include <sys/time.h>
#include <unistd.h>
+#include "access/xlogarchive.h"
#include "common/int.h"
#include "miscadmin.h"
#include "postmaster/pgarch.h"
@@ -48,6 +54,8 @@ static bool basic_archive_file(const char *file, const char *path);
static void basic_archive_file_internal(const char *file, const char *path);
static bool check_archive_directory(char **newval, void **extra, GucSource source);
static bool compare_files(const char *file1, const char *file2);
+static bool basic_restore_file(const char *file, const char *path,
+ const char *lastRestartPointFileName);
/*
* _PG_init
@@ -87,6 +95,19 @@ _PG_archive_module_init(ArchiveModuleCallbacks *cb)
cb->archive_file_cb = basic_archive_file;
}
+/*
+ * _PG_recovery_module_init
+ *
+ * Returns the module's restore callback.
+ */
+void
+_PG_recovery_module_init(RecoveryModuleCallbacks *cb)
+{
+ AssertVariableIsOfType(&_PG_recovery_module_init, RecoveryModuleInit);
+
+ cb->restore_cb = basic_restore_file;
+}
+
/*
* check_archive_directory
*
@@ -99,8 +120,8 @@ check_archive_directory(char **newval, void **extra, GucSource source)
/*
* The default value is an empty string, so we have to accept that value.
- * Our check_configured callback also checks for this and prevents
- * archiving from proceeding if it is still empty.
+ * Our check_configured and restore callbacks also check for this and
+ * prevent archiving or recovery from proceeding if it is still empty.
*/
if (*newval == NULL || *newval[0] == '\0')
return true;
@@ -368,3 +389,45 @@ compare_files(const char *file1, const char *file2)
return ret;
}
+
+/*
+ * basic_restore_file
+ *
+ * Retrieves one file from the WAL archives.
+ */
+static bool
+basic_restore_file(const char *file, const char *path,
+ const char *lastRestartPointFileName)
+{
+ char source[MAXPGPATH];
+ struct stat st;
+
+ ereport(DEBUG1,
+ (errmsg("restoring \"%s\" via basic_archive", file)));
+
+ if (archive_directory == NULL || archive_directory[0] == '\0')
+ ereport(ERROR,
+ (errcode(ERRCODE_INVALID_PARAMETER_VALUE),
+ errmsg("\"basic_archive.archive_directory\" is not set")));
+
+ /*
+ * Check whether the file exists. If not, we return false to indicate that
+ * there are no more files to restore.
+ */
+ snprintf(source, MAXPGPATH, "%s/%s", archive_directory, file);
+ if (stat(source, &st) != 0)
+ {
+ int elevel = (errno == ENOENT) ? DEBUG1 : ERROR;
+
+ ereport(elevel,
+ (errcode_for_file_access(),
+ errmsg("could not stat file \"%s\": %m", source)));
+ return false;
+ }
+
+ copy_file(source, path);
+
+ ereport(DEBUG1,
+ (errmsg("restored \"%s\" via basic_archive", file)));
+ return true;
+}
diff --git a/contrib/basic_archive/meson.build b/contrib/basic_archive/meson.build
index bc1380e6f6..af4580dea9 100644
--- a/contrib/basic_archive/meson.build
+++ b/contrib/basic_archive/meson.build
@@ -7,7 +7,7 @@ basic_archive_sources = files(
if host_system == 'windows'
basic_archive_sources += rc_lib_gen.process(win32ver_rc, extra_args: [
'--NAME', 'basic_archive',
- '--FILEDESC', 'basic_archive - basic archive module',])
+ '--FILEDESC', 'basic_archive - basic archive and recovery module',])
endif
basic_archive = shared_module('basic_archive',
@@ -31,4 +31,9 @@ tests += {
# which typical runningcheck users do not have (e.g. buildfarm clients).
'runningcheck': false,
},
+ 'tap': {
+ 'tests': [
+ 't/001_restore.pl',
+ ],
+ },
}
diff --git a/contrib/basic_archive/t/001_restore.pl b/contrib/basic_archive/t/001_restore.pl
new file mode 100644
index 0000000000..ec8767d740
--- /dev/null
+++ b/contrib/basic_archive/t/001_restore.pl
@@ -0,0 +1,44 @@
+
+# Copyright (c) 2022, PostgreSQL Global Development Group
+
+use strict;
+use warnings;
+use PostgreSQL::Test::Cluster;
+use PostgreSQL::Test::Utils;
+use Test::More;
+
+# start a node
+my $node = PostgreSQL::Test::Cluster->new('node');
+$node->init(has_archiving => 1, allows_streaming => 1);
+my $archive_dir = $node->archive_dir;
+$archive_dir =~ s!\\!/!g if $PostgreSQL::Test::Utils::windows_os;
+$node->append_conf('postgresql.conf', "archive_command = ''");
+$node->append_conf('postgresql.conf', "archive_library = 'basic_archive'");
+$node->append_conf('postgresql.conf', "basic_archive.archive_directory = '$archive_dir'");
+$node->start;
+
+# backup the node
+my $backup = 'backup';
+$node->backup($backup);
+
+# generate some new WAL files
+$node->safe_psql('postgres', "CREATE TABLE test (a INT);");
+$node->safe_psql('postgres', "SELECT pg_switch_wal();");
+$node->safe_psql('postgres', "INSERT INTO test VALUES (1);");
+
+# shut down the node (this should archive all WAL files)
+$node->stop;
+
+# restore from the backup
+my $restore = PostgreSQL::Test::Cluster->new('restore');
+$restore->init_from_backup($node, $backup, has_restoring => 1, standby => 0);
+$restore->append_conf('postgresql.conf', "restore_command = ''");
+$restore->append_conf('postgresql.conf', "restore_library = 'basic_archive'");
+$restore->append_conf('postgresql.conf', "basic_archive.archive_directory = '$archive_dir'");
+$restore->start;
+
+# ensure post-backup WAL was replayed
+my $result = $restore->safe_psql("postgres", "SELECT count(*) FROM test;");
+is($result, "1", "check restore content");
+
+done_testing();
diff --git a/doc/src/sgml/archive-modules.sgml b/doc/src/sgml/archive-modules.sgml
index ef02051f7f..53e657040b 100644
--- a/doc/src/sgml/archive-modules.sgml
+++ b/doc/src/sgml/archive-modules.sgml
@@ -1,34 +1,40 @@
<!-- doc/src/sgml/archive-modules.sgml -->
<chapter id="archive-modules">
- <title>Archive Modules</title>
+ <title>Archive and Recovery Modules</title>
<indexterm zone="archive-modules">
- <primary>Archive Modules</primary>
+ <primary>Archive and Recovery Modules</primary>
</indexterm>
<para>
PostgreSQL provides infrastructure to create custom modules for continuous
- archiving (see <xref linkend="continuous-archiving"/>). While archiving via
- a shell command (i.e., <xref linkend="guc-archive-command"/>) is much
- simpler, a custom archive module will often be considerably more robust and
- performant.
+ archiving and recovery (see <xref linkend="continuous-archiving"/>). While
+ a shell command (e.g., <xref linkend="guc-archive-command"/>,
+ <xref linkend="guc-restore-command"/>) is much simpler, a custom module will
+ often be considerably more robust and performant.
</para>
<para>
When a custom <xref linkend="guc-archive-library"/> is configured, PostgreSQL
will submit completed WAL files to the module, and the server will avoid
recycling or removing these WAL files until the module indicates that the files
- were successfully archived. It is ultimately up to the module to decide what
- to do with each WAL file, but many recommendations are listed at
- <xref linkend="backup-archiving-wal"/>.
+ were successfully archived. When a custom
+ <xref linkend="guc-restore-library"/> is configured, PostgreSQL will use the
+ module for recovery actions. It is ultimately up to the module to decide how
+ to accomplish each task, but some recommendations are listed at
+ <xref linkend="backup-archiving-wal"/> and
+ <xref linkend="backup-pitr-recovery"/>.
</para>
<para>
- Archiving modules must at least consist of an initialization function (see
- <xref linkend="archive-module-init"/>) and the required callbacks (see
- <xref linkend="archive-module-callbacks"/>). However, archive modules are
- also permitted to do much more (e.g., declare GUCs and register background
- workers).
+ Archive and recovery modules must at least consist of an initialization
+ function (see <xref linkend="archive-module-init"/> and
+ <xref linkend="recovery-module-init"/>) and the required callbacks (see
+ <xref linkend="archive-module-callbacks"/> and
+ <xref linkend="recovery-module-callbacks"/>). However, archive and recovery
+ modules are also permitted to do much more (e.g., declare GUCs and register
+ background workers). A module may be used for both
+ <varname>archive_library</varname> and <varname>restore_library</varname>.
</para>
<para>
@@ -37,7 +43,7 @@
</para>
<sect1 id="archive-module-init">
- <title>Initialization Functions</title>
+ <title>Archive Module Initialization Functions</title>
<indexterm zone="archive-module-init">
<primary>_PG_archive_module_init</primary>
</indexterm>
@@ -64,6 +70,12 @@ typedef void (*ArchiveModuleInit) (struct ArchiveModuleCallbacks *cb);
Only the <function>archive_file_cb</function> callback is required. The
others are optional.
</para>
+
+ <note>
+ <para>
+ <varname>archive_library</varname> is only loaded in the archiver process.
+ </para>
+ </note>
</sect1>
<sect1 id="archive-module-callbacks">
@@ -129,6 +141,132 @@ typedef bool (*ArchiveFileCB) (const char *file, const char *path);
<programlisting>
typedef void (*ArchiveShutdownCB) (void);
+</programlisting>
+ </para>
+ </sect2>
+ </sect1>
+
+ <sect1 id="recovery-module-init">
+ <title>Recovery Module Initialization Functions</title>
+ <indexterm zone="recovery-module-init">
+ <primary>_PG_recovery_module_init</primary>
+ </indexterm>
+ <para>
+ A recovery library is loaded by dynamically loading a shared library with the
+ <xref linkend="guc-restore-library"/> as the library base name. The normal
+ library search path is used to locate the library. To provide the required
+ recovery module callbacks and to indicate that the library is actually a
+ recovery module, it needs to provide a function named
+ <function>_PG_recovery_module_init</function>. This function is passed a
+ struct that needs to be filled with the callback function pointers for
+ individual actions.
+
+<programlisting>
+typedef struct RecoveryModuleCallbacks
+{
+ RecoveryRestoreCB restore_cb;
+ RecoveryArchiveCleanupCB archive_cleanup_cb;
+ RecoveryEndCB recovery_end_cb;
+ RecoveryShutdownCB shutdown_cb;
+} RecoveryModuleCallbacks;
+typedef void (*RecoveryModuleInit) (struct RecoveryModuleCallbacks *cb);
+</programlisting>
+
+ The <function>restore_cb</function> callback is required for archive
+ recovery, but it is optional for streaming replication. The others are
+ always optional.
+ </para>
+
+ <note>
+ <para>
+ <varname>restore_library</varname> is only loaded in the startup and
+ checkpointer processes and in single-user mode.
+ </para>
+ </note>
+ </sect1>
+
+ <sect1 id="recovery-module-callbacks">
+ <title>Recovery Module Callbacks</title>
+ <para>
+ The recovery callbacks define the actual behavior of the module. The server
+ will call them as required to execute recovery actions.
+ </para>
+
+ <sect2 id="recovery-module-restore">
+ <title>Restore Callback</title>
+ <para>
+ The <function>restore_cb</function> callback is called to retrieve a single
+ archived segment of the WAL file series for archive recovery or streaming
+ replication.
+
+<programlisting>
+typedef bool (*RecoveryRestoreCB) (const char *file, const char *path, const char *lastRestartPointFileName);
+</programlisting>
+
+ This callback must return <literal>true</literal> only if the file was
+ successfully retrieved. If the file is not available in the archives, the
+ callback must return <literal>false</literal>.
+ <replaceable>file</replaceable> will contain just the file name
+ of the WAL file to retrieve, while <replaceable>path</replaceable> contains
+ the destination's relative path (including the file name).
+ <replaceable>lastRestartPointFileName</replaceable> will contain the name
+ of the file containing the last valid restart point. That is the earliest
+ file that must be kept to allow a restore to be restartable, so this
+ information can be used to truncate the archive to just the minimum
+ required to support restarting from the current restore.
+ <replaceable>lastRestartPointFileName</replaceable> is typically only used
+ by warm-standby configurations (see <xref linkend="warm-standby"/>). Note
+ that if multiple standby servers are restoring from the same archive
+ directory, you will need to ensure that you do not delete WAL files until
+ they are no longer needed by any of the servers.
+ </para>
+ </sect2>
+
+ <sect2 id="recovery-module-archive-cleanup">
+ <title>Archive Cleanup Callback</title>
+ <para>
+ The <function>archive_cleanup_cb</function> callback is called at every
+ restart point and is intended to provide a mechanism for cleaning up old
+ archived WAL files that are no longer needed by the standby server.
+
+<programlisting>
+typedef void (*RecoveryArchiveCleanupCB) (const char *lastRestartPointFileName);
+</programlisting>
+
+ <replaceable>lastRestartPointFileName</replaceable> will contain the name
+ of the file containing the last valid restart point, like in
+ <link linkend="recovery-module-restore"><function>restore_cb</function></link>.
+ </para>
+ </sect2>
+
+ <sect2 id="recovery-module-end">
+ <title>Recovery End Callback</title>
+ <para>
+ The <function>recovery_end_cb</function> callback is called once at the end
+ of recovery and is intended to provide a mechanism for cleanup following
+ replication or recovery.
+
+<programlisting>
+typedef void (*RecoveryEndCB) (const char *lastRestartPointFileName);
+</programlisting>
+
+ <replaceable>lastRestartPointFileName</replaceable> will contain the name
+ of the file containing the last valid restart point, like in
+ <link linkend="recovery-module-restore"><function>restore_cb</function></link>.
+ </para>
+ </sect2>
+
+ <sect2 id="recovery-module-shutdown">
+ <title>Shutdown Callback</title>
+ <para>
+ The <function>shutdown_cb</function> callback is called when a process that
+ has loaded the recovery module exits (e.g., after an error) or the value of
+ <xref linkend="guc-restore-library"/> changes. If no
+ <function>shutdown_cb</function> is defined, no special action is taken in
+ these situations.
+
+<programlisting>
+typedef void (*RecoveryShutdownCB) (void);
</programlisting>
</para>
</sect2>
diff --git a/doc/src/sgml/backup.sgml b/doc/src/sgml/backup.sgml
index be05a33205..f44135061d 100644
--- a/doc/src/sgml/backup.sgml
+++ b/doc/src/sgml/backup.sgml
@@ -1180,9 +1180,27 @@ SELECT * FROM pg_backup_stop(wait_for_archive => true);
<para>
The key part of all this is to set up a recovery configuration that
describes how you want to recover and how far the recovery should
- run. The one thing that you absolutely must specify is the <varname>restore_command</varname>,
- which tells <productname>PostgreSQL</productname> how to retrieve archived
- WAL file segments. Like the <varname>archive_command</varname>, this is
+ run. The one thing that you absolutely must specify is either
+ <varname>restore_command</varname> or a <varname>restore_library</varname>
+ that defines a restore callback, which tells
+ <productname>PostgreSQL</productname> how to retrieve archived WAL file
+ segments.
+ </para>
+
+ <para>
+ Like the <varname>archive_library</varname> parameter,
+ <varname>restore_library</varname> is a shared library. Since such
+ libraries are written in <literal>C</literal>, creating your own may
+ require considerably more effort than writing a shell command. However,
+ recovery modules can be more performant than restoring via shell, and they
+ will have access to many useful server resources. For more information
+ about creating a <varname>restore_library</varname>, see
+ <xref linkend="archive-modules"/>.
+ </para>
+
+ <para>
+ Like the <varname>archive_command</varname>,
+ <varname>restore_command</varname> is
a shell command string. It can contain <literal>%f</literal>, which is
replaced by the name of the desired WAL file, and <literal>%p</literal>,
which is replaced by the path name to copy the WAL file to.
@@ -1201,14 +1219,20 @@ restore_command = 'cp /mnt/server/archivedir/%f %p'
</para>
<para>
- It is important that the command return nonzero exit status on failure.
- The command <emphasis>will</emphasis> be called requesting files that are not
- present in the archive; it must return nonzero when so asked. This is not
- an error condition. An exception is that if the command was terminated by
+ It is important that the <varname>restore_command</varname> return nonzero
+ exit status on failure, or, if you are using a
+ <varname>restore_library</varname>, that the restore function returns
+ <literal>false</literal> on failure. The command or library
+ <emphasis>will</emphasis> be called requesting files that are not
+ present in the archive; it must fail when so asked. This is not
+ an error condition. An exception is that if the
+ <varname>restore_command</varname> was terminated by
a signal (other than <systemitem>SIGTERM</systemitem>, which is used as
part of a database server shutdown) or an error by the shell (such as
command not found), then recovery will abort and the server will not start
- up.
+ up. Likewise, if the restore function provided by the
+ <varname>restore_library</varname> emits an <literal>ERROR</literal> or
+ <literal>FATAL</literal>, recovery will abort and the server won't start.
</para>
<para>
@@ -1232,7 +1256,8 @@ restore_command = 'cp /mnt/server/archivedir/%f %p'
close as possible given the available WAL segments). Therefore, a normal
recovery will end with a <quote>file not found</quote> message, the exact text
of the error message depending upon your choice of
- <varname>restore_command</varname>. You may also see an error message
+ <varname>restore_command</varname> or <varname>restore_library</varname>.
+ You may also see an error message
at the start of recovery for a file named something like
<filename>00000001.history</filename>. This is also normal and does not
indicate a problem in simple recovery situations; see
diff --git a/doc/src/sgml/basic-archive.sgml b/doc/src/sgml/basic-archive.sgml
index 60f23d2855..11fd670dbc 100644
--- a/doc/src/sgml/basic-archive.sgml
+++ b/doc/src/sgml/basic-archive.sgml
@@ -8,17 +8,20 @@
</indexterm>
<para>
- <filename>basic_archive</filename> is an example of an archive module. This
- module copies completed WAL segment files to the specified directory. This
- may not be especially useful, but it can serve as a starting point for
- developing your own archive module. For more information about archive
- modules, see <xref linkend="archive-modules"/>.
+ <filename>basic_archive</filename> is an example of an archive and recovery
+ module. This module copies completed WAL segment files to or from the
+ specified directory. This may not be especially useful, but it can serve as
+ a starting point for developing your own archive and recovery modules. For
+ more information about archive and recovery modules, see
+ see <xref linkend="archive-modules"/>.
</para>
<para>
- In order to function, this module must be loaded via
+ For use as an archive module, this module must be loaded via
<xref linkend="guc-archive-library"/>, and <xref linkend="guc-archive-mode"/>
- must be enabled.
+ must be enabled. For use as a recovery module, this module must be loaded
+ via <xref linkend="guc-restore-library"/>, and recovery must be enabled (see
+ <xref linkend="runtime-config-wal-archive-recovery"/>).
</para>
<sect2 id="basic-archive-configuration-parameters">
@@ -34,11 +37,12 @@
</term>
<listitem>
<para>
- The directory where the server should copy WAL segment files. This
- directory must already exist. The default is an empty string, which
- effectively halts WAL archiving, but if <xref linkend="guc-archive-mode"/>
- is enabled, the server will accumulate WAL segment files in the
- expectation that a value will soon be provided.
+ The directory where the server should copy WAL segment files to or from.
+ This directory must already exist. The default is an empty string,
+ which, when used for archiving, effectively halts WAL archival, but if
+ <xref linkend="guc-archive-mode"/> is enabled, the server will accumulate
+ WAL segment files in the expectation that a value will soon be provided.
+ When an empty string is used for recovery, restore will fail.
</para>
</listitem>
</varlistentry>
@@ -46,7 +50,7 @@
<para>
These parameters must be set in <filename>postgresql.conf</filename>.
- Typical usage might be:
+ Typical usage as an archive module might be:
</para>
<programlisting>
@@ -61,7 +65,8 @@ basic_archive.archive_directory = '/path/to/archive/directory'
<title>Notes</title>
<para>
- Server crashes may leave temporary files with the prefix
+ When <filename>basic_archive</filename> is used as an archive module, server
+ crashes may leave temporary files with the prefix
<filename>archtemp</filename> in the archive directory. It is recommended to
delete such files before restarting the server after a crash. It is safe to
remove such files while the server is running as long as they are unrelated
diff --git a/doc/src/sgml/config.sgml b/doc/src/sgml/config.sgml
index 89d53f2a64..ecdbfd71f7 100644
--- a/doc/src/sgml/config.sgml
+++ b/doc/src/sgml/config.sgml
@@ -3773,7 +3773,8 @@ include_dir 'conf.d'
recovery when the end of archived WAL is reached, but will keep trying to
continue recovery by connecting to the sending server as specified by the
<varname>primary_conninfo</varname> setting and/or by fetching new WAL
- segments using <varname>restore_command</varname>. For this mode, the
+ segments using <varname>restore_command</varname> or
+ <varname>restore_library</varname>. For this mode, the
parameters from this section and <xref
linkend="runtime-config-replication-standby"/> are of interest.
Parameters from <xref linkend="runtime-config-wal-recovery-target"/> will
@@ -3801,7 +3802,8 @@ include_dir 'conf.d'
<listitem>
<para>
The local shell command to execute to retrieve an archived segment of
- the WAL file series. This parameter is required for archive recovery,
+ the WAL file series. Either <varname>restore_command</varname> or
+ <xref linkend="guc-restore-library"/> is required for archive recovery,
but optional for streaming replication.
Any <literal>%f</literal> in the string is
replaced by the name of the file to retrieve from the archive,
@@ -3836,7 +3838,42 @@ restore_command = 'copy "C:\\server\\archivedir\\%f" "%p"' # Windows
<para>
This parameter can only be set in the <filename>postgresql.conf</filename>
- file or on the server command line.
+ file or on the server command line. It is only used if
+ <varname>restore_library</varname> is set to an empty string. If both
+ <varname>restore_command</varname> and
+ <varname>restore_library</varname> are set, an error will be raised.
+ </para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry id="guc-restore-library" xreflabel="restore_library">
+ <term><varname>restore_library</varname> (<type>string</type>)
+ <indexterm>
+ <primary><varname>restore_library</varname> configuration parameter</primary>
+ </indexterm>
+ </term>
+ <listitem>
+ <para>
+ The library to use for recovery actions, including retrieving archived
+ segments of the WAL file series and executing tasks at restartpoints
+ and at recovery end. Either <xref linkend="guc-restore-command"/> or
+ <varname>restore_library</varname> is required for archive recovery,
+ but optional for streaming replication. If this parameter is set to an
+ empty string (the default), restoring via shell is enabled, and
+ <varname>restore_command</varname>,
+ <varname>archive_cleanup_command</varname> and
+ <varname>recovery_end_command</varname> are used. If both
+ <varname>restore_library</varname> and any of
+ <varname>restore_command</varname>,
+ <varname>archive_cleanup_command</varname> or
+ <varname>recovery_end_command</varname> are set, an error will be
+ raised. Otherwise, the specified shared library is used for recovery.
+ For more information, see <xref linkend="archive-modules"/>.
+ </para>
+
+ <para>
+ This parameter can only be set in the
+ <filename>postgresql.conf</filename> file or on the server command line.
</para>
</listitem>
</varlistentry>
@@ -3881,7 +3918,10 @@ restore_command = 'copy "C:\\server\\archivedir\\%f" "%p"' # Windows
</para>
<para>
This parameter can only be set in the <filename>postgresql.conf</filename>
- file or on the server command line.
+ file or on the server command line. It is only used if
+ <varname>restore_library</varname> is set to an empty string. If both
+ <varname>archive_cleanup_command</varname> and
+ <varname>restore_library</varname> are set, an error will be raised.
</para>
</listitem>
</varlistentry>
@@ -3910,11 +3950,13 @@ restore_command = 'copy "C:\\server\\archivedir\\%f" "%p"' # Windows
</para>
<para>
This parameter can only be set in the <filename>postgresql.conf</filename>
- file or on the server command line.
+ file or on the server command line. It is only used if
+ <varname>restore_library</varname> is set to an empty string. If both
+ <varname>recovery_end_command</varname> and
+ <varname>restore_library</varname> are set, an error will be raised.
</para>
</listitem>
</varlistentry>
-
</variablelist>
</sect2>
diff --git a/doc/src/sgml/high-availability.sgml b/doc/src/sgml/high-availability.sgml
index f180607528..6266e2df7f 100644
--- a/doc/src/sgml/high-availability.sgml
+++ b/doc/src/sgml/high-availability.sgml
@@ -627,7 +627,8 @@ protocol to make nodes agree on a serializable transactional order.
<para>
In standby mode, the server continuously applies WAL received from the
primary server. The standby server can read WAL from a WAL archive
- (see <xref linkend="guc-restore-command"/>) or directly from the primary
+ (see <xref linkend="guc-restore-command"/> and
+ <xref linkend="guc-restore-library"/>) or directly from the primary
over a TCP connection (streaming replication). The standby server will
also attempt to restore any WAL found in the standby cluster's
<filename>pg_wal</filename> directory. That typically happens after a server
@@ -638,9 +639,11 @@ protocol to make nodes agree on a serializable transactional order.
<para>
At startup, the standby begins by restoring all WAL available in the
- archive location, calling <varname>restore_command</varname>. Once it
- reaches the end of WAL available there and <varname>restore_command</varname>
- fails, it tries to restore any WAL available in the <filename>pg_wal</filename> directory.
+ archive location, either by calling <varname>restore_command</varname> or
+ by executing the <varname>restore_library</varname>'s restore callback.
+ Once it reaches the end of WAL available there and
+ <varname>restore_command</varname> or the restore callback fails, it tries
+ to restore any WAL available in the <filename>pg_wal</filename> directory.
If that fails, and streaming replication has been configured, the
standby tries to connect to the primary server and start streaming WAL
from the last valid record found in archive or <filename>pg_wal</filename>. If that fails
@@ -698,7 +701,8 @@ protocol to make nodes agree on a serializable transactional order.
server (see <xref linkend="backup-pitr-recovery"/>). Create a file
<link linkend="file-standby-signal"><filename>standby.signal</filename></link><indexterm><primary>standby.signal</primary></indexterm>
in the standby's cluster data
- directory. Set <xref linkend="guc-restore-command"/> to a simple command to copy files from
+ directory. Set <xref linkend="guc-restore-command"/> or
+ <xref linkend="guc-restore-library"/> to copy files from
the WAL archive. If you plan to have multiple standby servers for high
availability purposes, make sure that <varname>recovery_target_timeline</varname> is set to
<literal>latest</literal> (the default), to make the standby server follow the timeline change
@@ -707,7 +711,8 @@ protocol to make nodes agree on a serializable transactional order.
<note>
<para>
- <xref linkend="guc-restore-command"/> should return immediately
+ <xref linkend="guc-restore-command"/> and restore callbacks provided by
+ <xref linkend="guc-restore-library"/> should return immediately
if the file does not exist; the server will retry the command again if
necessary.
</para>
@@ -731,8 +736,10 @@ protocol to make nodes agree on a serializable transactional order.
<para>
If you're using a WAL archive, its size can be minimized using the <xref
- linkend="guc-archive-cleanup-command"/> parameter to remove files that are no
- longer required by the standby server.
+ linkend="guc-archive-cleanup-command"/> parameter or the
+ <xref linkend="guc-restore-library"/>'s
+ <function>archive_cleanup_cb</function> callback function to remove files
+ that are no longer required by the standby server.
The <application>pg_archivecleanup</application> utility is designed specifically to
be used with <varname>archive_cleanup_command</varname> in typical single-standby
configurations, see <xref linkend="pgarchivecleanup"/>.
diff --git a/src/backend/access/transam/shell_restore.c b/src/backend/access/transam/shell_restore.c
index 8458209f49..dfd409905c 100644
--- a/src/backend/access/transam/shell_restore.c
+++ b/src/backend/access/transam/shell_restore.c
@@ -4,7 +4,8 @@
* Recovery functions for a user-specified shell command.
*
* These recovery functions use a user-specified shell command (e.g. based
- * on the GUC restore_command).
+ * on the GUC restore_command). It is used as the default, but other
+ * modules may define their own recovery logic.
*
* Portions Copyright (c) 1996-2023, PostgreSQL Global Development Group
* Portions Copyright (c) 1994, Regents of the University of California
@@ -24,6 +25,10 @@
#include "storage/ipc.h"
#include "utils/wait_event.h"
+static bool shell_restore(const char *file, const char *path,
+ const char *lastRestartPointFileName);
+static void shell_archive_cleanup(const char *lastRestartPointFileName);
+static void shell_recovery_end(const char *lastRestartPointFileName);
static bool ExecuteRecoveryCommand(const char *command,
const char *commandName,
bool failOnSignal,
@@ -31,6 +36,16 @@ static bool ExecuteRecoveryCommand(const char *command,
uint32 wait_event_info,
int fail_elevel);
+void
+shell_restore_init(RecoveryModuleCallbacks *cb)
+{
+ AssertVariableIsOfType(&shell_restore_init, RecoveryModuleInit);
+
+ cb->restore_cb = shell_restore;
+ cb->archive_cleanup_cb = shell_archive_cleanup;
+ cb->recovery_end_cb = shell_recovery_end;
+}
+
/*
* Attempt to execute a shell-based restore command.
*
@@ -88,7 +103,7 @@ shell_restore(const char *file, const char *path,
/*
* Attempt to execute a shell-based archive cleanup command.
*/
-void
+static void
shell_archive_cleanup(const char *lastRestartPointFileName)
{
char *cmd;
@@ -104,7 +119,7 @@ shell_archive_cleanup(const char *lastRestartPointFileName)
/*
* Attempt to execute a shell-based end-of-recovery command.
*/
-void
+static void
shell_recovery_end(const char *lastRestartPointFileName)
{
char *cmd;
diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c
index 8f47fb7570..ae537cd87f 100644
--- a/src/backend/access/transam/xlog.c
+++ b/src/backend/access/transam/xlog.c
@@ -4884,15 +4884,16 @@ static void
CleanupAfterArchiveRecovery(TimeLineID EndOfLogTLI, XLogRecPtr EndOfLog,
TimeLineID newTLI)
{
+
/*
- * Execute the recovery_end_command, if any.
+ * Execute the recovery-end callback, if any.
*/
- if (recoveryEndCommand && strcmp(recoveryEndCommand, "") != 0)
+ if (RecoveryContext.recovery_end_cb)
{
char lastRestartPointFname[MAXFNAMELEN];
GetOldestRestartPointFileName(lastRestartPointFname);
- shell_recovery_end(lastRestartPointFname);
+ RecoveryContext.recovery_end_cb(lastRestartPointFname);
}
/*
@@ -7307,14 +7308,14 @@ CreateRestartPoint(int flags)
timestamptz_to_str(xtime)) : 0));
/*
- * Finally, execute archive_cleanup_command, if any.
+ * Execute the archive-cleanup callback, if any.
*/
- if (archiveCleanupCommand && strcmp(archiveCleanupCommand, "") != 0)
+ if (RecoveryContext.archive_cleanup_cb)
{
char lastRestartPointFname[MAXFNAMELEN];
GetOldestRestartPointFileName(lastRestartPointFname);
- shell_archive_cleanup(lastRestartPointFname);
+ RecoveryContext.archive_cleanup_cb(lastRestartPointFname);
}
return true;
diff --git a/src/backend/access/transam/xlogarchive.c b/src/backend/access/transam/xlogarchive.c
index 4b89addf97..4af5689c25 100644
--- a/src/backend/access/transam/xlogarchive.c
+++ b/src/backend/access/transam/xlogarchive.c
@@ -22,6 +22,8 @@
#include "access/xlog.h"
#include "access/xlog_internal.h"
#include "access/xlogarchive.h"
+#include "access/xlogrecovery.h"
+#include "fmgr.h"
#include "miscadmin.h"
#include "pgstat.h"
#include "postmaster/startup.h"
@@ -31,6 +33,11 @@
#include "storage/ipc.h"
#include "storage/lwlock.h"
+/*
+ * Global context for recovery-related callbacks.
+ */
+RecoveryModuleCallbacks RecoveryContext;
+
/*
* Attempt to retrieve the specified file from off-line archival storage.
* If successful, fill "path" with its complete path (note that this will be
@@ -70,7 +77,7 @@ RestoreArchivedFile(char *path, const char *xlogfname,
goto not_available;
/* In standby mode, restore_command might not be supplied */
- if (recoveryRestoreCommand == NULL || strcmp(recoveryRestoreCommand, "") == 0)
+ if (RecoveryContext.restore_cb == NULL)
goto not_available;
/*
@@ -148,14 +155,15 @@ RestoreArchivedFile(char *path, const char *xlogfname,
XLogFileName(lastRestartPointFname, 0, 0L, wal_segment_size);
/*
- * Check signals before restore command and reset afterwards.
+ * Check signals before restore callback and reset afterwards.
*/
PreRestoreCommand();
/*
* Copy xlog from archival storage to XLOGDIR
*/
- ret = shell_restore(xlogfname, xlogpath, lastRestartPointFname);
+ ret = RecoveryContext.restore_cb(xlogfname, xlogpath,
+ lastRestartPointFname);
PostRestoreCommand();
@@ -602,3 +610,59 @@ XLogArchiveCleanup(const char *xlog)
unlink(archiveStatusPath);
/* should we complain about failure? */
}
+
+/*
+ * Loads all the recovery callbacks into our global RecoveryContext. The
+ * caller is responsible for validating the combination of library/command
+ * parameters that are set (e.g., restore_command and restore_library cannot
+ * both be set).
+ */
+void
+LoadRecoveryCallbacks(void)
+{
+ RecoveryModuleInit init;
+
+ /*
+ * If the shell command is enabled, use our special initialization
+ * function. Otherwise, load the library and call its
+ * _PG_recovery_module_init().
+ */
+ if (restoreLibrary[0] == '\0')
+ init = shell_restore_init;
+ else
+ init = (RecoveryModuleInit)
+ load_external_function(restoreLibrary, "_PG_recovery_module_init",
+ false, NULL);
+
+ if (init == NULL)
+ ereport(ERROR,
+ (errmsg("recovery modules have to define the symbol "
+ "_PG_recovery_module_init")));
+
+ memset(&RecoveryContext, 0, sizeof(RecoveryModuleCallbacks));
+ (*init) (&RecoveryContext);
+
+ /*
+ * If using shell commands, remove callbacks for any commands that are not
+ * set.
+ */
+ if (restoreLibrary[0] == '\0')
+ {
+ if (recoveryRestoreCommand[0] == '\0')
+ RecoveryContext.restore_cb = NULL;
+ if (archiveCleanupCommand[0] == '\0')
+ RecoveryContext.archive_cleanup_cb = NULL;
+ if (recoveryEndCommand[0] == '\0')
+ RecoveryContext.recovery_end_cb = NULL;
+ }
+}
+
+/*
+ * Call the shutdown callback of the loaded recovery module, if defined.
+ */
+void
+call_recovery_module_shutdown_cb(int code, Datum arg)
+{
+ if (RecoveryContext.shutdown_cb)
+ RecoveryContext.shutdown_cb();
+}
diff --git a/src/backend/access/transam/xlogrecovery.c b/src/backend/access/transam/xlogrecovery.c
index 5e65785306..db0cd4469a 100644
--- a/src/backend/access/transam/xlogrecovery.c
+++ b/src/backend/access/transam/xlogrecovery.c
@@ -80,6 +80,7 @@ const struct config_enum_entry recovery_target_action_options[] = {
/* options formerly taken from recovery.conf for archive recovery */
char *recoveryRestoreCommand = NULL;
+char *restoreLibrary = NULL;
char *recoveryEndCommand = NULL;
char *archiveCleanupCommand = NULL;
RecoveryTargetType recoveryTarget = RECOVERY_TARGET_UNSET;
@@ -1053,24 +1054,37 @@ validateRecoveryParameters(void)
if (!ArchiveRecoveryRequested)
return;
+ /*
+ * Check for invalid combinations of the command/library parameters and
+ * load the callbacks.
+ */
+ CheckMutuallyExclusiveGUCs(restoreLibrary, "restore_library",
+ recoveryRestoreCommand, "restore_command");
+ CheckMutuallyExclusiveGUCs(restoreLibrary, "restore_library",
+ recoveryEndCommand, "recovery_end_command");
+ before_shmem_exit(call_recovery_module_shutdown_cb, 0);
+ LoadRecoveryCallbacks();
+
/*
* Check for compulsory parameters
*/
if (StandbyModeRequested)
{
if ((PrimaryConnInfo == NULL || strcmp(PrimaryConnInfo, "") == 0) &&
- (recoveryRestoreCommand == NULL || strcmp(recoveryRestoreCommand, "") == 0))
+ RecoveryContext.restore_cb == NULL)
ereport(WARNING,
- (errmsg("specified neither primary_conninfo nor restore_command"),
- errhint("The database server will regularly poll the pg_wal subdirectory to check for files placed there.")));
+ (errmsg("specified neither primary_conninfo nor restore_command "
+ "nor a restore_library that defines a restore callback"),
+ errhint("The database server will regularly poll the pg_wal "
+ "subdirectory to check for files placed there.")));
}
else
{
- if (recoveryRestoreCommand == NULL ||
- strcmp(recoveryRestoreCommand, "") == 0)
+ if (RecoveryContext.restore_cb == NULL)
ereport(FATAL,
(errcode(ERRCODE_INVALID_PARAMETER_VALUE),
- errmsg("must specify restore_command when standby mode is not enabled")));
+ errmsg("must specify restore_command or a restore_library that defines "
+ "a restore callback when standby mode is not enabled")));
}
/*
diff --git a/src/backend/postmaster/checkpointer.c b/src/backend/postmaster/checkpointer.c
index de0bbbfa79..6350fd0b83 100644
--- a/src/backend/postmaster/checkpointer.c
+++ b/src/backend/postmaster/checkpointer.c
@@ -38,6 +38,7 @@
#include "access/xlog.h"
#include "access/xlog_internal.h"
+#include "access/xlogarchive.h"
#include "access/xlogrecovery.h"
#include "libpq/pqsignal.h"
#include "miscadmin.h"
@@ -222,6 +223,16 @@ CheckpointerMain(void)
*/
before_shmem_exit(pgstat_before_server_shutdown, 0);
+ /*
+ * Check for invalid combinations of the command/library parameters and
+ * load the callbacks. We do this before setting up the exception handler
+ * so that any problems result in a server crash shortly after startup.
+ */
+ CheckMutuallyExclusiveGUCs(restoreLibrary, "restore_library",
+ archiveCleanupCommand, "archive_cleanup_command");
+ before_shmem_exit(call_recovery_module_shutdown_cb, 0);
+ LoadRecoveryCallbacks();
+
/*
* Create a memory context that we will do all our work in. We do this so
* that we can reset the context during error recovery and thereby avoid
@@ -548,6 +559,9 @@ HandleCheckpointerInterrupts(void)
if (ConfigReloadPending)
{
+ char *prevRestoreLibrary = pstrdup(restoreLibrary);
+ char *prevArchiveCleanupCommand = pstrdup(archiveCleanupCommand);
+
ConfigReloadPending = false;
ProcessConfigFile(PGC_SIGHUP);
@@ -563,6 +577,18 @@ HandleCheckpointerInterrupts(void)
* because of SIGHUP.
*/
UpdateSharedMemoryConfig();
+
+ CheckMutuallyExclusiveGUCs(restoreLibrary, "restore_library",
+ archiveCleanupCommand, "archive_cleanup_command");
+ if (strcmp(prevRestoreLibrary, restoreLibrary) != 0 ||
+ strcmp(prevArchiveCleanupCommand, archiveCleanupCommand) != 0)
+ {
+ call_recovery_module_shutdown_cb(0, (Datum) 0);
+ LoadRecoveryCallbacks();
+ }
+
+ pfree(prevRestoreLibrary);
+ pfree(prevArchiveCleanupCommand);
}
if (ShutdownRequestPending)
{
diff --git a/src/backend/postmaster/pgarch.c b/src/backend/postmaster/pgarch.c
index 8ecdb9ca23..8e91f2d70f 100644
--- a/src/backend/postmaster/pgarch.c
+++ b/src/backend/postmaster/pgarch.c
@@ -831,11 +831,8 @@ LoadArchiveLibrary(void)
{
ArchiveModuleInit archive_init;
- if (XLogArchiveLibrary[0] != '\0' && XLogArchiveCommand[0] != '\0')
- ereport(ERROR,
- (errcode(ERRCODE_INVALID_PARAMETER_VALUE),
- errmsg("both archive_command and archive_library set"),
- errdetail("Only one of archive_command, archive_library may be set.")));
+ CheckMutuallyExclusiveGUCs(XLogArchiveLibrary, "archive_library",
+ XLogArchiveCommand, "archive_command");
memset(&ArchiveContext, 0, sizeof(ArchiveModuleCallbacks));
diff --git a/src/backend/postmaster/startup.c b/src/backend/postmaster/startup.c
index 8786186898..f9ff2b5583 100644
--- a/src/backend/postmaster/startup.c
+++ b/src/backend/postmaster/startup.c
@@ -20,6 +20,7 @@
#include "postgres.h"
#include "access/xlog.h"
+#include "access/xlogarchive.h"
#include "access/xlogrecovery.h"
#include "access/xlogutils.h"
#include "libpq/pqsignal.h"
@@ -133,13 +134,17 @@ StartupProcShutdownHandler(SIGNAL_ARGS)
* Re-read the config file.
*
* If one of the critical walreceiver options has changed, flag xlog.c
- * to restart it.
+ * to restart it. Also, check for invalid combinations of the command/library
+ * parameters and reload the recovery callbacks if necessary.
*/
static void
StartupRereadConfig(void)
{
char *conninfo = pstrdup(PrimaryConnInfo);
char *slotname = pstrdup(PrimarySlotName);
+ char *prevRestoreLibrary = pstrdup(restoreLibrary);
+ char *prevRestoreCommand = pstrdup(recoveryRestoreCommand);
+ char *prevRecoveryEndCommand = pstrdup(recoveryEndCommand);
bool tempSlot = wal_receiver_create_temp_slot;
bool conninfoChanged;
bool slotnameChanged;
@@ -161,6 +166,22 @@ StartupRereadConfig(void)
if (conninfoChanged || slotnameChanged || tempSlotChanged)
StartupRequestWalReceiverRestart();
+
+ CheckMutuallyExclusiveGUCs(restoreLibrary, "restore_library",
+ recoveryRestoreCommand, "restore_command");
+ CheckMutuallyExclusiveGUCs(restoreLibrary, "restore_library",
+ recoveryEndCommand, "recovery_end_command");
+ if (strcmp(prevRestoreLibrary, restoreLibrary) != 0 ||
+ strcmp(prevRestoreCommand, recoveryRestoreCommand) != 0 ||
+ strcmp(prevRecoveryEndCommand, recoveryEndCommand) != 0)
+ {
+ call_recovery_module_shutdown_cb(0, (Datum) 0);
+ LoadRecoveryCallbacks();
+ }
+
+ pfree(prevRestoreLibrary);
+ pfree(prevRestoreCommand);
+ pfree(prevRecoveryEndCommand);
}
/* Handle various signals that might be sent to the startup process */
diff --git a/src/backend/utils/misc/guc.c b/src/backend/utils/misc/guc.c
index d52069f446..7858e9a649 100644
--- a/src/backend/utils/misc/guc.c
+++ b/src/backend/utils/misc/guc.c
@@ -6880,3 +6880,17 @@ call_enum_check_hook(struct config_enum *conf, int *newval, void **extra,
return true;
}
+
+/*
+ * ERROR if both parameters are set.
+ */
+void
+CheckMutuallyExclusiveGUCs(const char *p1val, const char *p1name,
+ const char *p2val, const char *p2name)
+{
+ if (p1val[0] != '\0' && p2val[0] != '\0')
+ ereport(ERROR,
+ (errcode(ERRCODE_INVALID_PARAMETER_VALUE),
+ errmsg("both %s and %s set", p1name, p2name),
+ errdetail("Only one of %s, %s may be set.", p1name, p2name)));
+}
diff --git a/src/backend/utils/misc/guc_tables.c b/src/backend/utils/misc/guc_tables.c
index 5025e80f89..a8a516b0c6 100644
--- a/src/backend/utils/misc/guc_tables.c
+++ b/src/backend/utils/misc/guc_tables.c
@@ -3776,6 +3776,16 @@ struct config_string ConfigureNamesString[] =
NULL, NULL, NULL
},
+ {
+ {"restore_library", PGC_SIGHUP, WAL_ARCHIVE_RECOVERY,
+ gettext_noop("Sets the library that will be called for recovery actions."),
+ NULL
+ },
+ &restoreLibrary,
+ "",
+ NULL, NULL, NULL
+ },
+
{
{"archive_cleanup_command", PGC_SIGHUP, WAL_ARCHIVE_RECOVERY,
gettext_noop("Sets the shell command that will be executed at every restart point."),
diff --git a/src/backend/utils/misc/postgresql.conf.sample b/src/backend/utils/misc/postgresql.conf.sample
index 4cceda4162..38fb3e0823 100644
--- a/src/backend/utils/misc/postgresql.conf.sample
+++ b/src/backend/utils/misc/postgresql.conf.sample
@@ -269,6 +269,7 @@
# placeholders: %p = path of file to restore
# %f = file name only
# e.g. 'cp /mnt/server/archivedir/%f %p'
+#restore_library = '' # library to use for recovery actions
#archive_cleanup_command = '' # command to execute at every restartpoint
#recovery_end_command = '' # command to execute at completion of recovery
diff --git a/src/include/access/xlog_internal.h b/src/include/access/xlog_internal.h
index 59fc7bc105..756f0898b5 100644
--- a/src/include/access/xlog_internal.h
+++ b/src/include/access/xlog_internal.h
@@ -400,5 +400,6 @@ extern PGDLLIMPORT bool ArchiveRecoveryRequested;
extern PGDLLIMPORT bool InArchiveRecovery;
extern PGDLLIMPORT bool StandbyMode;
extern PGDLLIMPORT char *recoveryRestoreCommand;
+extern PGDLLIMPORT char *restoreLibrary;
#endif /* XLOG_INTERNAL_H */
diff --git a/src/include/access/xlogarchive.h b/src/include/access/xlogarchive.h
index 299304703e..71c9b88165 100644
--- a/src/include/access/xlogarchive.h
+++ b/src/include/access/xlogarchive.h
@@ -30,9 +30,45 @@ extern bool XLogArchiveIsReady(const char *xlog);
extern bool XLogArchiveIsReadyOrDone(const char *xlog);
extern void XLogArchiveCleanup(const char *xlog);
-extern bool shell_restore(const char *file, const char *path,
- const char *lastRestartPointFileName);
-extern void shell_archive_cleanup(const char *lastRestartPointFileName);
-extern void shell_recovery_end(const char *lastRestartPointFileName);
+/*
+ * Recovery module callbacks
+ *
+ * These callback functions should be defined by recovery libraries and
+ * returned via _PG_recovery_module_init(). For more information about the
+ * purpose of each callback, refer to the recovery modules documentation.
+ */
+typedef bool (*RecoveryRestoreCB) (const char *file, const char *path,
+ const char *lastRestartPointFileName);
+typedef void (*RecoveryArchiveCleanupCB) (const char *lastRestartPointFileName);
+typedef void (*RecoveryEndCB) (const char *lastRestartPointFileName);
+typedef void (*RecoveryShutdownCB) (void);
+
+typedef struct RecoveryModuleCallbacks
+{
+ RecoveryRestoreCB restore_cb;
+ RecoveryArchiveCleanupCB archive_cleanup_cb;
+ RecoveryEndCB recovery_end_cb;
+ RecoveryShutdownCB shutdown_cb;
+} RecoveryModuleCallbacks;
+
+extern RecoveryModuleCallbacks RecoveryContext;
+
+/*
+ * Type of the shared library symbol _PG_recovery_module_init that is looked up
+ * when loading a recovery library.
+ */
+typedef void (*RecoveryModuleInit) (RecoveryModuleCallbacks *cb);
+
+extern PGDLLEXPORT void _PG_recovery_module_init(RecoveryModuleCallbacks *cb);
+
+extern void LoadRecoveryCallbacks(void);
+extern void call_recovery_module_shutdown_cb(int code, Datum arg);
+
+/*
+ * Since the logic for recovery via a shell command is in the core server and
+ * does not need to be loaded via a shared library, it has a special
+ * initialization function.
+ */
+extern void shell_restore_init(RecoveryModuleCallbacks *cb);
#endif /* XLOG_ARCHIVE_H */
diff --git a/src/include/access/xlogrecovery.h b/src/include/access/xlogrecovery.h
index 47c29350f5..35d1d09374 100644
--- a/src/include/access/xlogrecovery.h
+++ b/src/include/access/xlogrecovery.h
@@ -55,6 +55,7 @@ extern PGDLLIMPORT int recovery_min_apply_delay;
extern PGDLLIMPORT char *PrimaryConnInfo;
extern PGDLLIMPORT char *PrimarySlotName;
extern PGDLLIMPORT char *recoveryRestoreCommand;
+extern PGDLLIMPORT char *restoreLibrary;
extern PGDLLIMPORT char *recoveryEndCommand;
extern PGDLLIMPORT char *archiveCleanupCommand;
diff --git a/src/include/utils/guc.h b/src/include/utils/guc.h
index ba89d013e6..947597247f 100644
--- a/src/include/utils/guc.h
+++ b/src/include/utils/guc.h
@@ -404,6 +404,8 @@ extern void *guc_malloc(int elevel, size_t size);
extern pg_nodiscard void *guc_realloc(int elevel, void *old, size_t size);
extern char *guc_strdup(int elevel, const char *src);
extern void guc_free(void *ptr);
+extern void CheckMutuallyExclusiveGUCs(const char *p1val, const char *p1name,
+ const char *p2val, const char *p2name);
#ifdef EXEC_BACKEND
extern void write_nondefault_variables(GucContext context);
--
2.25.1
--1yeeQ81UyVL57Vl7--
view thread (11+ messages) latest in thread
reply
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Reply to all the recipients using the --to and --cc options:
reply via email
To: [email protected]
Cc: [email protected]
Subject: Re: [PATCH v9 1/1] Allow recovery via loadable modules.
In-Reply-To: <no-message-id-1857796@localhost>
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
This inbox is served by agora; see mirroring instructions
for how to clone and mirror all data and code used for this inbox