agora inbox for [email protected]  

help / color / mirror / Atom feed

From: Justin Pryzby <[email protected]>
Subject: [PATCH 03/21] set TESTDIR from src/test/perl rather than Makefile/vcregress
Date: Sat, 19 Feb 2022 13:06:52 -0600

https://www.postgresql.org/message-id/flat/20220219234148.GC9008%40telsasoft.com

These seem most likely to break:

make check -C src/bin/psql
make check -C src/bin/pgbench
make check -C src/test/modules/test_misc
make check -C src/test/modules/libpq_pipeline
PROVE_TESTS=t/027_stream_regress.pl make check -C src/test/recovery
---
 src/Makefile.global.in                 |  9 ++++++---
 src/test/perl/PostgreSQL/Test/Utils.pm | 16 +++++++++-------
 src/tools/msvc/vcregress.pl            |  1 -
 3 files changed, 15 insertions(+), 11 deletions(-)

diff --git a/src/Makefile.global.in b/src/Makefile.global.in
index 138d66ac006..cff13bb8087 100644
--- a/src/Makefile.global.in
+++ b/src/Makefile.global.in
@@ -451,8 +451,9 @@ echo "+++ tap install-check in $(subdir) +++" && \
 rm -rf '$(CURDIR)'/tmp_check && \
 $(MKDIR_P) '$(CURDIR)'/tmp_check && \
 cd $(srcdir) && \
-   TESTDIR='$(CURDIR)' PATH="$(bindir):$(CURDIR):$$PATH" \
+   PATH="$(bindir):$(CURDIR):$$PATH" \
    PGPORT='6$(DEF_PGPORT)' top_builddir='$(CURDIR)/$(top_builddir)' \
+   PG_SUBDIR='$(CURDIR)' \
    PG_REGRESS='$(CURDIR)/$(top_builddir)/src/test/regress/pg_regress' \
    $(PROVE) $(PG_PROVE_FLAGS) $(PROVE_FLAGS) $(if $(PROVE_TESTS),$(PROVE_TESTS),t/*.pl)
 endef
@@ -462,8 +463,9 @@ echo "+++ tap install-check in $(subdir) +++" && \
 rm -rf '$(CURDIR)'/tmp_check && \
 $(MKDIR_P) '$(CURDIR)'/tmp_check && \
 cd $(srcdir) && \
-   TESTDIR='$(CURDIR)' PATH="$(bindir):$(CURDIR):$$PATH" \
+   PATH="$(bindir):$(CURDIR):$$PATH" \
    PGPORT='6$(DEF_PGPORT)' top_builddir='$(top_builddir)' \
+   PG_SUBDIR='$(CURDIR)' \
    PG_REGRESS='$(top_builddir)/src/test/regress/pg_regress' \
    $(PROVE) $(PG_PROVE_FLAGS) $(PROVE_FLAGS) $(if $(PROVE_TESTS),$(PROVE_TESTS),t/*.pl)
 endef
@@ -474,7 +476,8 @@ echo "+++ tap check in $(subdir) +++" && \
 rm -rf '$(CURDIR)'/tmp_check && \
 $(MKDIR_P) '$(CURDIR)'/tmp_check && \
 cd $(srcdir) && \
-   TESTDIR='$(CURDIR)' $(with_temp_install) PGPORT='6$(DEF_PGPORT)' \
+   $(with_temp_install) PGPORT='6$(DEF_PGPORT)' \
+   PG_SUBDIR='$(CURDIR)' \
    PG_REGRESS='$(CURDIR)/$(top_builddir)/src/test/regress/pg_regress' \
    $(PROVE) $(PG_PROVE_FLAGS) $(PROVE_FLAGS) $(if $(PROVE_TESTS),$(PROVE_TESTS),t/*.pl)
 endef
diff --git a/src/test/perl/PostgreSQL/Test/Utils.pm b/src/test/perl/PostgreSQL/Test/Utils.pm
index 1ca2cc59170..063a19b1df5 100644
--- a/src/test/perl/PostgreSQL/Test/Utils.pm
+++ b/src/test/perl/PostgreSQL/Test/Utils.pm
@@ -189,19 +189,21 @@ INIT
 	# test may still fail, but it's more likely to report useful facts.
 	$SIG{PIPE} = 'IGNORE';
 
-	# Determine output directories, and create them.  The base path is the
-	# TESTDIR environment variable, which is normally set by the invoking
-	# Makefile.
-	$tmp_check = $ENV{TESTDIR} ? "$ENV{TESTDIR}/tmp_check" : "tmp_check";
+	my $test_dir = File::Spec->rel2abs($ENV{PG_SUBDIR} || dirname(dirname($0)));
+	my $test_name = basename($0);
+	$test_name =~ s/\.[^.]+$//;
+
+	$ENV{TESTDIR} = $test_dir;
+
+	# Determine output directories, and create them.
+	$tmp_check = "$test_dir/tmp_check";
 	$log_path = "$tmp_check/log";
 
 	mkdir $tmp_check;
 	mkdir $log_path;
 
 	# Open the test log file, whose name depends on the test name.
-	$test_logfile = basename($0);
-	$test_logfile =~ s/\.[^.]+$//;
-	$test_logfile = "$log_path/regress_log_$test_logfile";
+	$test_logfile = "$log_path/regress_log_$test_name";
 	open my $testlog, '>', $test_logfile
 	  or die "could not open STDOUT to logfile \"$test_logfile\": $!";
 
diff --git a/src/tools/msvc/vcregress.pl b/src/tools/msvc/vcregress.pl
index 2d6ccd45419..ae19ff5736b 100644
--- a/src/tools/msvc/vcregress.pl
+++ b/src/tools/msvc/vcregress.pl
@@ -291,7 +291,6 @@ sub tap_check
 	$ENV{PG_REGRESS}    = "$topdir/$Config/pg_regress/pg_regress";
 	$ENV{REGRESS_SHLIB} = "$topdir/src/test/regress/regress.dll";
 
-	$ENV{TESTDIR} = "$dir";
 	my $module = basename $dir;
 	# add the module build dir as the second element in the PATH
 	$ENV{PATH} =~ s!;!;$topdir/$Config/$module;!;
-- 
2.17.1


--mln0rGgUGuXEqmuI
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment; filename="0004-s-also-remove-PATH.patch"

view thread (11+ messages)  latest in thread

reply

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Reply to all the recipients using the --to and --cc options:
  reply via email

  To: [email protected]
  Cc: [email protected]
  Subject: Re: [PATCH 03/21] set TESTDIR from src/test/perl rather than Makefile/vcregress
  In-Reply-To: <no-message-id-1858720@localhost>

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

This inbox is served by agora; see mirroring instructions
for how to clone and mirror all data and code used for this inbox